msgstr ""\r
"Project-Id-Version: PACKAGE VERSION\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"\r
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Type: text/plain; charset=CHARSET\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr ""\r
\r
msgid "Select your language:"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
msgid "Select which Printrbot machine you have:"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:316\r
+msgid "Other machine information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:352\r
+msgid "Custom RepRap information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr ""\r
\r
msgid "Communication State: %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr ""\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+msgid "Bed leveling wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+msgid "It will do the following steps"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+msgid "Connect to printer"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+msgid "Head offset wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+msgid "Expert config"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Installed firmware: %s"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr ""\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr ""\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr ""\r
msgid "Preferences...\tCTRL+,"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr ""\r
\r
msgid "PID Debugger..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+msgid "Auto Firmware Update..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Do you really want to reset?"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr ""\r
\r
msgid "Error: no plugin selected"\r
msgstr ""\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+msgid "Preferences"\r
+msgstr ""\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr ""\r
msgid "Cura settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr ""\r
\r
msgid "Communication settings"\r
msgstr ""\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+msgid "Add new machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+msgid "Remove machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr ""\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr ""\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-msgid "Change machine name"\r
-msgstr ""\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
"results and is not recommended."\r
msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"Last-Translator: Michal Vondracek <info@michalvondracek.cz>\n"\r
"Language-Team: Czech <info@3draty.cz>\n"\r
"MIME-Version: 1.0\n"\r
"X-Generator: POEditor.com\n"\r
"Language: cs\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Nalezena nová verze Cura, mám ji stáhnout?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Nová verze je dostupná"\r
\r
msgid "Select your language:"\r
msgstr "Zvolte svou tiskárnu"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Vyber jakou Printerbot tiskárnu máš:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Velikost tiskového prostoru v mm."\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Jsou dostupné tyto profily tiskáren"\r
"zapotřebí věnovat pozornost nastavení. V případě nalezení problému s "\r
"předdefinovanými profily nebo žádosti o přidání vyplňte ticket na GitHubu."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura je připravena k používání!"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Odesílat anonymní informace o užívání:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* Jste již provedl nějaké změny v původním firmware"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Zobrazit záznam chyb"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Probíhá připojení k tiskárně."\r
\r
msgid "Communication State: %s"\r
msgstr "Stav komunikace: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Nepodařilo se navázat spojení s tiskárnou"\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Stiskněte koncový spínač dole Z "\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Kalibrace extrudéru vyžaduje pár ručních zásahů."\r
"Chyba: Nelze otevřít seriový pot.\n"\r
"V případě že se tak děje neustále, zkuste odpojit a znovu zapojiit USB kabel."\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura je připravena k používání!"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura je připravena k používání!"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Spustit průvodce vyrovnáním stolku"\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Tento průvodce ti pomůže v nastavení Cura pro tvou tiskárnu"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Což znamená kroků na extruderu:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Probíhá připojení k tiskárně."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#, fuzzy\r
+msgid "Resume"\r
+msgstr "Reset"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Tento průvodce ti pomůže v nastavení Cura pro tvou tiskárnu"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Spustit průvodce nastavením offsetu hotendů"\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Expert"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr "Je nám líto, ale Cura neobsahuje základní firmware pro vaši tiskárnu."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Aktualizace firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Cura podporuje pouze elektroniku založenou na ATMega2560. Takže aktualizace "\r
"pomocí Cury nemusí fungovat!"\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Čtení firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Připojování k tiskárně.."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr "Prosím přopojte tiskárnu k vašemu počítači pomocí USB kabelu."\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Nepodařilo se najít tiskárnu pro aktualizaci firmware. Je tiskárna připojená "\r
"k PC?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Nahrávám firmware\n"\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Hotovo!\n"\r
"Informace of firmware: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Nepodařilo se zapsat firmware"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Nepodařilo se kontaktovat YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Nahrát model...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Nastavení...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Nastavení tiskárny..."\r
\r
msgid "PID Debugger..."\r
msgstr "Ladění PID..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Aktualizace firmware"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Kopírovat profil do schránky"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "Tisknout vše najednou"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "Tisknout postupně"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Nástroje"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Tiskárna"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Přepnout do jednoduchého módu..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Přepnout do rozšířeného módu..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Otevřít nastavení pro experty...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Spustit průvodce prvním spuštěním"\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Spustit průvodce vyrovnáním stolku"\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Spustit průvodce nastavením offsetu hotendů"\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Dokumentace online"\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Nahlásit problém..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Zkontrolovat aktualizace..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Otevřít YouMagine stránky..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "O Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Nápověda"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Pro \"Tisknout po jednom\" je třeba mít správně vyplněné údaje o velikosti "\r
"hlavy a rozměrech konstrukce v nastavení tiskárny."\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr "Varování - po jednom "\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "Nainstalovat základní firmware"\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Nainstalovat vlastní firmware..."\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Vyberte profil k načtení"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Vyberte GCode z nějž bude profil načten"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Nenalezen profil v GCode. Pracuje pouze s GCode generovaným Curou 12.07 a "\r
"novější."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Chyba při načítání profilu"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Vyberte soubor profilu pro uložení"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"neuložíte, přijdete o ně.\n"\r
"Určitě resetovat?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Resetovat profil"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Varování: Instalace vlastního firmware negarantuje funkci zařízení a může "\r
"dojít i k zničení tiskárny."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Otevřít firmware"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Používáte poslední verzi Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Skvělé!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Rozšíření"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Chyba: nebylo zvoleno rozšíření"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Nastavení...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "Tiskové okno"\r
msgid "Cura settings"\r
msgstr "Nastavení Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Nastavení tiskárny"\r
\r
msgid "Communication settings"\r
msgstr "Parametry komunikace"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Průvodce přidáním nové tiskárny"\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Zvolte svou tiskárnu"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr "Změň název tiskárny"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Nelze odebrat poslední tiskárnu z Cura"\r
msgid "Enter the new name:"\r
msgstr "Zadej nové jméno"\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-msgid "Change machine name"\r
-msgstr "Změň název tiskárny"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
msgstr ""\r
"Spodní vrstva z více než 0,2% FMM (3/4 velikosti trysky) obvykle dává špatné "\r
"výsledky a není doporučeno."\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-02-11 21:03+0100\n"\r
"Last-Translator: Lars Pötter <Lars_Poetter@gmx.de>\n"\r
"Language-Team: Deutsch <Lars_Poetter@gmx.de>\n"\r
"X-Generator: Gtranslator 2.91.6\n"\r
"Plural-Forms: nplurals=2; plural=(n != 1);\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
"Eine neue Version von Cura ist verfügbar, möchten Sie diese herunterladen?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Neue Version verfügbar"\r
\r
msgid "Select your language:"\r
msgstr "Wählen Sie ihr Gerät aus"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Welchen Typ Maschine haben Sie:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Grösse des Geräts in mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Die folgenden Drucker Profile sind verfügbar"\r
"erzielen,\n"\r
"oder überhaupt funktionieren. Kleiner Anpassungen können notwendig sein."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura kann nun verwendet werden!"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Sende anonyme Informationen zur Verwendung:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* Sie andere Anpassungen in der Firmware vorgenommen haben"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Zeige den Fehlerbericht"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Verbinde zur Maschine."\r
\r
msgid "Communication State: %s"\r
msgstr "Kommunikations-Status: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Konnte keine Verbindung zum Drucker aufbauen."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Bitte drücken Sie den unteren Z Endstopp."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Das Kalibrieren der Schritte pro E benötigt manuelle Aktionen."\r
"Fehler: Serieller Port zum Gerät konnte nicht geöffnet werden\n"\r
"Besteht dieses Problem wiederholt, stecken Sie das USB-Kabel neu ein."\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura kann nun verwendet werden!"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura kann nun verwendet werden!"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Drucktisch-Ausrichtung Assistent aufrufen..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Dieser Assistent wird Ihnen bei den folgenden Schritten helfen:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Dies bedeutet folgende Anzahl Schritte pro E:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Verbinde zur Maschine."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Fortsetzen"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Dieser Assistent wird Ihnen bei den folgenden Schritten helfen:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Assistent für den Druckkopfversatz aufrufen..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Experte"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Bitte entschuldigen Sie, Cura enthält keine Standard-Firmware für Ihre "\r
"Geräte-Konfiguration."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Firmware-Aktualisierung"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Lese Firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Verbinde zum Gerät..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Konnte Gerät für Firmware-Aktualisierung nicht finden\n"\r
"Ist das Gerät mit dem PC verbunden?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Hochladen der Firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Geschafft!\n"\r
"Firmware installiert: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Schreiben der Firmware fehlgeschlagen.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Verbindung zu YouMagine.com fehlgeschlagen"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Lade Modell-Datei...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Voreinstellungen...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Geräte-Einstellungen..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID Debugger..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Firmware-Aktualisierung"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Kopiere Profil in Zwischenablage"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Grösse des Druckkopfs"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Werkzeuge"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Maschine"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Wechseln zum Schnelldruck..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Wechseln zum Expertenmodus..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Öffne Experten-Einstellungen..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Erster-Start Assistent von Cura aufrufen..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Drucktisch-Ausrichtung Assistent aufrufen..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Assistent für den Druckkopfversatz aufrufen..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Experte"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Online-Dokumentation..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Fehler melden..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Prüfe auf Update..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Website YouMagine öffnen..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "Über Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Hilfe"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Installiere Standard Marlin Firmware..."\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Installiere benutzerdefinierte Firmware..."\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Wählen Sie die Profil-Datei zum Laden"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Wählen Sie die GCode-Datei zum Laden des Profils"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Diese Funktion ist nur bei GCode-Dateien verfügbar, welche mit Cura ab "\r
"Version 12.07 erstellt wurden."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Fehler beim Laden des Profils"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Wählen Sie die Profil-Datei zum Speichern aus"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"verloren!\n"\r
"Wollen Sie die Profil-Einstellungen wirklich zurücksetzen?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Profil zurücksetzen"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"nicht automatisch die Funktionstüchtigkeit ihres Geräts, und kann zu "\r
"Beschädigungen an Ihrem Gerät führen."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Firmware zum Hochladen auswählen"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Sie verwenden die aktuelle Version von Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Sehr gut!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Plugins"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Fehler: Kein Plugin ausgewählt"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Voreinstellungen...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
#, fuzzy\r
msgid "Print window"\r
msgid "Cura settings"\r
msgstr "Cura-Einstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Maschinen-Einstellungen"\r
\r
msgid "Communication settings"\r
msgstr "Kommunikations-Einstellungen"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Neue Maschine hinzufügen..."\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Wählen Sie ihr Gerät aus"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Name des Geräts"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Kann die letzte Gerätekonfiguration nicht aus Cura entfernen"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Name des Geräts"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, fuzzy, python-format\r
msgid "Printing on %s"\r
"erste Schicht führt zu einer schlechten Druckqualität und wird nicht "\r
"empfohlen."\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "* Cura für Ihr Gerät einrichten"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "* Drucktisch ausrichten (optional)"\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Neue Maschine hinzufügen..."\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Statistik"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Kamera"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Fortsetzen"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "Lade Gcode...\n"\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2013-09-27 09:41+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr ""\r
\r
msgid "Select your language:"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
msgid "Select which Printrbot machine you have:"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:316\r
+msgid "Other machine information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:352\r
+msgid "Custom RepRap information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr ""\r
\r
msgid "Communication State: %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr ""\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+msgid "Bed leveling wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+msgid "It will do the following steps"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+msgid "Connect to printer"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+msgid "Head offset wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+msgid "Expert config"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Installed firmware: %s"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr ""\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr ""\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr ""\r
msgid "Preferences...\tCTRL+,"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr ""\r
\r
msgid "PID Debugger..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+msgid "Auto Firmware Update..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Do you really want to reset?"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr ""\r
\r
msgid "Error: no plugin selected"\r
msgstr ""\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+msgid "Preferences"\r
+msgstr ""\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr ""\r
msgid "Cura settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr ""\r
\r
msgid "Communication settings"\r
msgstr ""\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+msgid "Add new machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+msgid "Remove machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr ""\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr ""\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-msgid "Change machine name"\r
-msgstr ""\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
"results and is not recommended."\r
msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2013-10-02 14:50+0100\n"\r
"Last-Translator: Jose Gemez <josegemez@gmail.com>\n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Una nueva versión de Cura esta disponible, quieres descargarla?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Nueva versión disponible"\r
\r
msgid "Select your language:"\r
msgstr "Selecciona tu maquina"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Que tipo de máquina tienes:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Tamaño de la maquina en mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
#, fuzzy\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura esta ahora autorizado para compartir en YouMagine"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Enviar información de uso anónima"\r
+\r
#: Cura/gui/configWizard.py:353\r
#, fuzzy\r
msgid ""\r
msgid "* Have other changes in the firmware"\r
msgstr "Tiene otros cambios en el firmware"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Mostrar log de errores"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Conectando a la maquina"\r
\r
msgid "Communication State: %s"\r
msgstr "Estado de comunicación: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Fallo al establecer la conexión con la impresora"\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Por favor presiona el endstop Z inferior. "\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Calibrar los pasos del Extrusor requiere algunas acciones manuales."\r
"Error: Fallo al abrir el Puerto Serie de la maquina\n"\r
"Si sigue ocurriendo, prueba a desconectar y reconectar el cable USB"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura esta ahora autorizado para compartir en YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura esta ahora autorizado para compartir en YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Iniciar sistente para calibración de la cama..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Este asistente te ayudara con los siguientes pasos:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Esto se da como resultado los siguiente pasos por E:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Conectando a la maquina"\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Continuar"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Este asistente te ayudara con los siguientes pasos:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Iniciar asistente de distancia entre extrusores..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Experto"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Lo siento, pero cura no viene con un firmware por defecto para la "\r
"configuración de tu maquina."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Actualización firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Leyendo firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Conectando a la máquina"\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Fallo al buscar actualización del firmware\n"\r
"Esta tu máquina conectada al PC?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Subiendo firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Hecho!\n"\r
"Firmware instalado: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Fallo al cargar firmware.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Fallo conectando con YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Cargar modelo...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Preferencias...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Ajuste de la máquina..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID Debugger..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Actualización firmware"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Copiar perfil al portapapeles"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Tamaño cabezal de impresión"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Herramientas"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Maquina"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Cambiar a ajustes rapidos..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Cambiar a ajustes completos..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Abrir ajustes experto..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Iniciar asistente inicial..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Iniciar sistente para calibración de la cama..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Iniciar asistente de distancia entre extrusores..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Experto"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Documentación online..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Reportar un problema..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Comprobando actualizaciones..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Abre tu página YouMagine"\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "Sobra Cura"\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Ayuda"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Instalar firmware Marlin por defecto"\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
#, fuzzy\r
msgid "Install custom firmware..."\r
msgstr "Instalar firmware personalizado"\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Seleccion perfil a cargar"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Selección gcode para cargar perfil desde el"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"No se ha encontrado Perfil en el GCode.\n"\r
"Esta caracteristicas solo funciona en versiones de Cura 12.07 o nuevas."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Carga de Perfil erronea"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Seleccion perfil para guardar"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"perderán!\n"\r
"¿Realmente desea reiniciar?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Resetear Perfil"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Advertencia: Instalando un firmware personalizado no garantizamos el "\r
"correcto funcionamiento de la impresora y se podría dañar"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Abrir firmware para cargar"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Estas usando la última versión de Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Im-presionante!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Plugins"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Error: no hay plugin seleccionado"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Preferencias...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
#, fuzzy\r
msgid "Print window"\r
msgid "Cura settings"\r
msgstr "Ajustes de Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Ajuste de la máquina"\r
\r
msgid "Communication settings"\r
msgstr "Ajustes comunicación"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Añadir nueva máquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Selecciona tu maquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Nombre de la máquina"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "No se puede borrar la ultima configuración de la máquina en Cura"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Nombre de la máquina"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, fuzzy, python-format\r
msgid "Printing on %s"\r
"Una capa final de mas de %.2fmm (3/4 del tamaño del nozzle) usualmente da "\r
"malos resultados y no es recomendable."\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "Configura Cura para tu máquina"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "Opcionalmente nivela tu cama caliente"\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Añadir nueva máquina"\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Estadisticas"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Camara"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Continuar"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "Cargar gcode...\n"\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-07-28 13:47+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: <LL@li.org>\n"\r
"Language: fr\n"\r
"X-Generator: Poedit 1.6.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
"Une nouvelle version de Cura est disponible, voulez-vous la télécharger?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Nouvelle version disponible"\r
\r
msgid "Select your language:"\r
msgstr "Sélectionnez votre machine"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Quel type de machine avez-vous:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Taille de la machine en mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Les profils de machines prédéfinis suivants sont disponibles"\r
" ou si vous voulez un profil supplémentaire.\n"\r
"S'il vous plaît, signaler le à \"github issue tracker\"."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura est maintenant prêt à être utilisé."\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Soummettre des informations d'usages anonymes:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* Vous avez des changements particuliers dans le firmware"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Montrer le journal d'erreur"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Connexion à la machine."\r
\r
msgid "Communication State: %s"\r
msgstr "Etat de la communication: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Impossible d'établir la communication avec l'imprimante."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Veuillez appuyer sur la butée Z du bas."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "La calibration du nombre de pas par E requiert une action manuelle."\r
"Erreur: de se connecter à la machine\n"\r
"Si ce problème persiste, essayer de reconnecter le cable USB"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura est maintenant prêt à être utilisé."\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura est maintenant prêt à être utilisé."\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Assistant de mise a niveau du plateau..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Cet assistant va vous aider avec les étapes suivantes:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Le calcul fournit la valeur de pas par E suivante:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Connexion à la machine."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Reprendre"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Cet assistant va vous aider avec les étapes suivantes:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Assistant de décalage des têtes..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Expert"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Désolé, mais Cura n'est pas livré avec un firmware par défault dédié à votre "\r
"machine."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Mise à jour du firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"ATmega2560.\n"\r
"Donc, mettre à jour votre RepRap avec Cura fonctionnera pas."\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Lecture du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Connexion à la machine..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Veuillez connecter l'imprimante à \n"\r
"votre ordinateur avec le câble USB."\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Aucune machine trouvée pour ce firmware\n"\r
"Est-elle connectée à votre PC? "\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Téléchargement du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Teminé!\n"\r
"Firmware installé: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Echec d'écriture du firmware.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Impossible de se connecter à YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Ouvrir un modèle...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Préférences...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Réglages machine..."\r
\r
msgid "PID Debugger..."\r
msgstr "Déboguer le PID..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Mise à jour du firmware"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Copier le profil dans le bloc-note"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "Imprimer tous les objets à la fois"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "Imprimer une objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Outils"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Machine"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Basculer en mode simple..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Basculer en mode complet..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Configuration experte..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Assistant de première utilisation..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Assistant de mise a niveau du plateau..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Assistant de décalage des têtes..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Documentation en ligne..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Signaler un problème..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Vérification des mises à jour..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Ouvrir le site YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "A propos de Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Aide"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Pour l'impression \"Une à la fois \", vous devez avoir entré la taille de la "\r
"tête d'impression dans les paramètres de la machine"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr "Avertissement un objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "Installer le firmware Marlin par défaut"\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Installer un firmware maison"\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Sélection du profil à charger"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Sélection du fichier GCode à utiliser"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Pas de profil trouvé dans le fichier GCode.\n"\r
"Cette option ne marche qu'avec les fichiers crées à partir de Cura 12.07. "\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Erreur de chargement du profil"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Sélection d'un profil à sauvegarder"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"A moins de l'avoir sauvegardé, tous les réglages actuels seront perdus!\n"\r
"Voulez-vous vraiment les réinitialiser?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Réinitialisation du profile"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Attention: installer un firmware maison ne garantit pas le bon "\r
"fonctionnement de votre machine et pourrait même l'endommager."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Sélection du firmware à mettre à jour"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Vous avez la dernière version de Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Excellent!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Extensions"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Erreur: aucune extension sélectionnée"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Préférences...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "Fenêtre d'impression"\r
msgid "Cura settings"\r
msgstr "Réglages de Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Réglages de la machine"\r
\r
msgid "Communication settings"\r
msgstr "Réglages de la communication"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Ajouter une nouvelle machine..."\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Sélectionnez votre machine"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Nom de la machine"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "La dernière configuration de machine ne peut pas être retirée"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Nom de la machine"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
"Une première couche plus épaisses que %.2fmm (3/4 du diamètre de la buse) "\r
"donne généralement de mauvais résultats et n'est pas recommandée."\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "* Configurer Cura pour votre machine"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "* Optionnellement mettre votre lit à niveau "\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Ajouter une nouvelle machine..."\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Statistiques"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Caméra"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Reprendre"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "Chargement du GCode...\n"\r
\r
msgstr ""\r
"Project-Id-Version: Cura Translation\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-09-11 12:20+0900\n"\r
"Last-Translator: Jinbuhm Kim <Jinbuhm.Kim@gmail.com>\n"\r
"Language-Team: Korean <Jinbuhm.Kim@gmail.com>\n"\r
"Language: ko_KR\n"\r
"X-Poedit-SourceCharset: UTF-8\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "새로운 버젼의 큐라가 있습니다. 다운로드하시겠습니까?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "새로운 버젼이 있습니다."\r
\r
msgid "Select your language:"\r
msgstr "기기를 선택하세요"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "어떤 기기를 가지고 있나요:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "기기 크기(밀리미터)"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "다음의 미리 정의된 기기 프로파일들이 사용가능합니다."\r
"만약 미리 정의된 프로파일에 문제가 발견이 되거나 추가적인 프로파일을 원하면\n"\r
"github의 이슈 트래커에 신고를 해주세요."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "큐라를 사용할 준비가 되었습니다!"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "익명으로 사용 정보를 보내기:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* 펌웨어에 다른 변경사항을 가지고 있습니다"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "에러 기록 보기"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "기기에 연결합니다."\r
\r
msgid "Communication State: %s"\r
msgstr "통신 상태:%s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "프린터와 연결 실패."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "하단 Z축 엔드스탑을 누르세요."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Steps Per E 를 보정하는 것은 몇가지 수동작업이 필요합니다."\r
"오류: 시리얼 포트를 여는데 실패했습니다\n"\r
"만약 이 현상이 계속되면 USB 케이블을 제거하고 다시 연결을 해보십시오"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "큐라를 사용할 준비가 되었습니다!"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "큐라를 사용할 준비가 되었습니다!"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "베드 수평맞추기 마법사 실행..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "마법사가 당신의 기기를 위한 큐라의 설정을 도와줄 것입니다."\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "This results in the following steps per E:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "기기에 연결합니다."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#, fuzzy\r
+msgid "Resume"\r
+msgstr "리셋"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "마법사가 당신의 기기를 위한 큐라의 설정을 도와줄 것입니다."\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "헤드 옵셋 마법사 실행..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "전문가 설정 "\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr "죄송합니다, 큐라는 이 기기의 설정을 위한 기본 펌웨어가 없습니다."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "펌웨어 업데이트 "\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"큐라는 ATMega2560기반의 하드웨어의 펌웨어 업데이트만 지원합니다. \n"\r
"따라서 RepRap기반의 기기는 동작을 하지 않을 수도 있습니다."\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "확인"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "펌웨어 읽기..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "기기에 접속중..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"USB 케이블로 프린터와\n"\r
" 컴퓨터를 연결하시오."\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"펌웨어 업데이트를 위한 기기를 찾는데 실패\n"\r
"기기가 PC에 연결이 되어 있나요?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "펌웨어 업로딩 중..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"완료!\n"\r
"설치된 펌웨어:%s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "펌웨어 쓰기 실패.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "YouMagine.com에 접속 실패"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "모델 파일 읽어오기...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "환경설정...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "기기설정..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID 디버거..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "펌웨어 업데이트 "\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "프로파일을 클립보드에 복사"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "한번에 모두 프린트하기"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "한번에 하나씩 프린트하기"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "툴"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "기기 "\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "빠른 프린터 설정으로 전환..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "자세한 설정으로 전환..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "전문가 설정 열기...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "처음 실행 마법사 실행..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "베드 수평맞추기 마법사 실행..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "헤드 옵셋 마법사 실행..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "전문가 설정 "\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "온라인 문서..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "문제 리포트하기..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "업데이트 확인..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Yoymagine 웹사이트 열기..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "큐라에 관하여..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "도움말"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"\"한번에 하나씩\" 프린팅의 경우, 기기 설정에서 정확한 헤드 사이즈와 갠트리의 "\r
"높이를 입력해야 합니다."\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr "한번에 하나씩 프린팅 경고"\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "기본 펌웨어 설치..."\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "사용자 정의 펌웨어 설치..."\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "로드할 프로파일 파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "프로파일을 로드하기위해 gcode파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"GCode 파일에 프로파일 파일이 없음.\n"\r
"이 기능은 큐라 12.07이상에서 만들어진 GCode files만 동작합니다."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "프로파일 로드 에러"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "저장할 프로파일 파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"현재 프로파일을 저장하지 않으면 모든 설정은 사라집니다 !\n"\r
"정말 리셋하기를 원하십니까?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "프로파일 리셋"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"경고: 사용자 정의 펌웨어의 설치는 정상적인 동작을 보장하지 않으며 기기에 손상"\r
"을 줄 수 있습니다."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "업로드할 펌웨어 열기"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "최신 버젼의 큐라를 사용하고 있습니다 !"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "좋습니다!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "플러그인"\r
\r
msgid "Error: no plugin selected"\r
msgstr "오류: 플러그인이 선택되지 않음"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "환경설정...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "프린트 윈도우 "\r
msgid "Cura settings"\r
msgstr "큐라 설정"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "기기 설정"\r
\r
msgid "Communication settings"\r
msgstr "통신 설정"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "새로운 기기 추가를 위한 마법사"\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "기기를 선택하세요"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "기기 이름"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "큐라에서 마지막 기기 설정을 제거할 수 없습니다"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "기기 이름"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
msgstr ""\r
"%.2fmm (3/4 노즐 사이즈)이상의 바닥 레이어는 일반적으로 좋지 않은 결과를 제공"\r
"하며 사용하지 않는 것이 좋습니다."\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2013-10-01 15:32+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Er is een nieuwere versie van Cura beschikbaar, wil je die downloaden?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Nieuwe versie beschikbaar"\r
\r
msgid "Select your language:"\r
msgstr "Selecteer je machine"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Wat voor een machine heb je:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Afmeting van de machine in mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "De volgende vooraf gedefinieerde machine profielen zijn beschikbaar"\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
#, fuzzy\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Dien anomieme gebruiksinformatie in:"\r
+\r
#: Cura/gui/configWizard.py:353\r
#, fuzzy\r
msgid ""\r
msgid "* Have other changes in the firmware"\r
msgstr "* Je andere wijzigingen in de firmware hebt"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Laat de foutmelding log zien"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Verbinding aan het maken met de machine"\r
\r
msgid "Communication State: %s"\r
msgstr "Communicatie status: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Het is niet gelukt een verbinding te maken met de printer."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Druk de bovenste Z eindschakaar in."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"dit probleem zich blijft herhalen, haal dan de USB kabel uit de printer en "\r
"sluit deze opnieuw aan."\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Wizard: Platform vlak afstellen..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Deze wizard helpt je bij de volgende stappen:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Dit resulteert in het volgende aantal stappen per E:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Verbinding aan het maken met de machine"\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Ga door"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Deze wizard helpt je bij de volgende stappen:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Wizard: Afstand printkoppen calibreren..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Expert"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Sorry... Cura heeft geen standaard firmware voor de configuratie van jouw "\r
"machine."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Firmware update"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "Oké"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Firmware controleren..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Verbinding maken met de machine..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Geen machine gevonden om de firmware op te waarderen\n"\r
"Is je machine verbonden met de computer?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Firmware aan het uploaden..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Klaar!\n"\r
"Firmware geïnstalleerd: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Het is niet gelukt de firmware te uploaden. \n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Verbinden met YouMagine.com is mislukt."\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Laad Model...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Voorkeuren...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Machineinstellingen..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID foutopsporing..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Firmware update"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Kopieer profiel naar klembord"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Afmetingen printkop"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Gereedschappen"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Machine"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Eenvoudige bedieningsmodus"\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Uitgebreide bedieningsmodus"\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Expertinstellingen..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Opstartwizard..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Wizard: Platform vlak afstellen..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Wizard: Afstand printkoppen calibreren..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Online documentatie..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Meld een probleem..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Controleer op updates..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Open de YouMagine website..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "Over Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Help"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Installeer de standaardfirmware..."\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Installeer je eigen firmware..."\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Selecteer een profielbestand om te laden"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Selecteer een GCode bestand om het profiel uit te laden..."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Deze feature werkt alleen wanneer GCode is gemaakt vanuit Cura nieuwer dan "\r
"versie 12.07"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Fout bij het laden van het profiel"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Selecteer een profiel om op te slaan"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"opgeslagen!\n"\r
"Wil je echt herstellen?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Profiel herstellen"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Let op: Wanneer je je eigen firmware installeert, zou je machine niet goed "\r
"kunnen werken en zou je je printer kunnen beschadigen."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Open firmware om te installeren"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Je hebt de nieuwste versie van Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Te gek!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Plugins"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Fout: geen plugin geselecteerd"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Voorkeuren...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
#, fuzzy\r
msgid "Print window"\r
msgstr "Cura"\r
\r
# Suggestions: Machine settings -> General properties?\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Algemene eigenschappen"\r
\r
msgid "Communication settings"\r
msgstr "Communicatieinstellingen"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Voeg een nieuwe machine toe..."\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Selecteer je machine"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Machine naam"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Kan de laatste machineconfiguratie niet verwijderen in Cura"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Machine naam"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, fuzzy, python-format\r
msgid "Printing on %s"\r
"results and is not recommended."\r
msgstr ""\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "*Configureer Cura voor jouw machine"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "* Optie: nivelleer je print platform"\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Voeg een nieuwe machine toe..."\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Statistieken"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Camera"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Ga door"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "GCode laden...\n"\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2013-10-02 11:23+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Dostępna jest nowa wersja Cura, czy chcesz ją pobrać?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Dostępna jest nowa wersja"\r
\r
msgid "Select your language:"\r
msgstr "Wybierz swoją drukarkę"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Jaki rodzaj drukarki posiadasz:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Wielkość drukarki w mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
#, fuzzy\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Wyślij anonimowe informaje o użyciu programu:"\r
+\r
#: Cura/gui/configWizard.py:353\r
#, fuzzy\r
msgid ""\r
msgid "* Have other changes in the firmware"\r
msgstr "* Wprowadzałeś inne niestandardowe zmiany w firmware"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Pokaż dziennik błędów"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Łączenie z drukarką."\r
\r
msgid "Communication State: %s"\r
msgstr "Stan komunikacji: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "NIE UDAŁO SIĘ ustanowić połączenia z drukarką."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Naciśnij wyłącznik krańcowy przedni dolny Z."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Kalibracja ilości kroków osi E wymaga kilku ręcznych czynności."\r
"Jeśli błąd się powtarza, spróbuj odłączyć a następnie ponownie podłączyć "\r
"kabel USB"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Uruchom kreatora poziomowania..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Ten kreator pomoże Ci przeprowadzić następujące kroki:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Wynik pomiary w ilości kroków osi E:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Łączenie z drukarką."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Wznów"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Ten kreator pomoże Ci przeprowadzić następujące kroki:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Uruchom kratora przesunięcia głowicy"\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Ekspert"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Przykro mi, ale Cura nie posiada domyślnego firmware'u dla Twojej "\r
"konfiguracji drukarki."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Uaktualnienie firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Wczytywanie firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Łączenie z drukarką..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Nie udało się znaleźć drukarki aby wysłąć firmware\n"\r
"Czy Twoja drukarka jest podłączona do komputera?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Wysyłanie firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Koniec!\n"\r
"Zainstalowano firmware: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Nie udało się zapisać firmware.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Nie udało się połączyć z YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Wczytaj model...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Ustawienia...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Ustawienia drukarki..."\r
\r
msgid "PID Debugger..."\r
msgstr "Debugger PID..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Uaktualnienie firmware"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Kopiuj Profil do schowka"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Rozmiar głowicy drukarki"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Narzędzia"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Drukarka"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Przełącz na tryb prosty..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Przełącz na tryb pełny..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Otwórz ustawienia zaawansowane..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Uruchom kreatora pierszego uruchomienia..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Uruchom kreatora poziomowania..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Uruchom kratora przesunięcia głowicy"\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Ekspert"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Dokumentacja online..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Zgłoś problem..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Sprawdź aktualizacje..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Otwórz stronę YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "O programie..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Pomoc"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Zainstaluj domyślny firmware Marlin"\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
#, fuzzy\r
msgid "Install custom firmware..."\r
msgstr "Zainstaluj własny firmware"\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Wybierz Profil do wczytania"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Wybierz plik GCode z którego wczytać Profil"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Ta funkcja działa tylko z plikami GCode utworzonymi przez wersję Cura 12.07 "\r
"lub nowszą"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Błąd wczytywania Profilu"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Wybierz plik Profilu do zapisu"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"utracone!\n"\r
"Jesteś pewien że chcesz zresetować?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Reset Profilu"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Uwaga: Instalowanie własnego firmware nie gwarantuje poprawnego działania "\r
"drukarki i może ją uszkodzić."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Otwóz firmware do wysłania"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Posiadasz najnowszą wersję Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Zajebiasczo!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Rozszerzenia"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Błąd: nie wybrano rozszerzenia"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Ustawienia...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
#, fuzzy\r
msgid "Print window"\r
msgid "Cura settings"\r
msgstr "Ustawienia Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Ustawienia drukarki"\r
\r
msgid "Communication settings"\r
msgstr "Ustawienia łączności"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Dodaj nową drukarkę..."\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Wybierz swoją drukarkę"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Nazwa drukarki"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Nie można usunąć ostatniej w Cura konfiguracji drukari"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Nazwa drukarki"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, fuzzy, python-format\r
msgid "Printing on %s"\r
"results and is not recommended."\r
msgstr ""\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "* Skonfigurowanie Cura do Twojej drukarki"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "* Opcjonalne poziomowanie stołu drukarki"\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Dodaj nową drukarkę..."\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Statystyki"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Kamera"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Wznów"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "Wczytywanie GCode...\n"\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-04-20 09:41+0100\n"\r
"Last-Translator: Andrew Answer <mail@answe.ru>\n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Language: Russian\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Новая версия Cura доступна, хотите скачать?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Новая версия доступна"\r
\r
msgid "Select your language:"\r
msgstr "Выберите свой принтер"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Какой у вас тип машины:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Размер машины в мм"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Доступны следующие профили принтеров"\r
"или вы хотите создать дополнительный профиль,\n"\r
"сообщите на наш трекер Github."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura готова к работе!"\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Отправить анонимную информацию по использованию программы:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* Вы сами делали изменения в прошивке"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Показать лог ошибок"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Соединение с машиной."\r
\r
msgid "Communication State: %s"\r
msgstr "Состояние связи: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Не могу установить соединение с принтером."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Пожалуйста, нажмите нижний концевой датчик Z."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Настройка шагов экструдера требует некоторых действий."\r
"Если это продолжает происходить, попробуйте вытащить и вставить заново USB-"\r
"кабель"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura готова к работе!"\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura готова к работе!"\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Запустить мастер выравнивания стола..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Этот мастер поможет вам настроить Cura для вашего принтера."\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Это результат следующего количества шагов экструдера:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Соединение с машиной."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#, fuzzy\r
+msgid "Resume"\r
+msgstr "Сброс"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Этот мастер поможет вам настроить Cura для вашего принтера."\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Запустить мастер смещения головки..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Подробно"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
"Извините, Cura не поставляется с прошивкой по умолчанию для вашего принтера."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Обновление прошивки"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Обновление вашего RepRap при помощи Cura может сработать, а может и не "\r
"сработать."\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Читаю прошивку..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Соединяюсь с машиной..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Пожалуйста, подключите принтер к\n"\r
"компьютеру с помощью USB-кабеля."\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Не могу найти принтер для обновления прошивки.\n"\r
"Ваш принтер подключен к компьютеру?"\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Обновление прошивки..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Готово!\n"\r
"Установлена прошивка: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Не удалось записать прошивку.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Не могу соединиться с YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Загрузить файл модели...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Настройки программы...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Настройки принтера..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID отладчик..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Обновление прошивки"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Скопировать профиль в буфер обмена"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "Напечатать все сразу"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "Напечатать по одной за раз"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Инструменты"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Принтер"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Переключиться на быструю печать..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Переключиться на полный набор настроек..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Открыть подробные настройки...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Запустить мастер начальных настроек..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Запустить мастер выравнивания стола..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Запустить мастер смещения головки..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Подробно"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Онлайн-справка"\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Сообщить о проблеме..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Проверить обновления..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Открыть сайт YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "О Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Помощь"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Для печати моделей по одной вы должны ввести верные размеры головки и высоту "\r
"сопла в настройках принтера"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr "Предупреждение для печати моделей по одной"\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "Установить прошивку по умолчанию..."\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Установить другую прошивку..."\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Выберите файл профиля для загрузки"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Выберите файл G-кода для загрузки профиля из него"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Профиль не найден.\n"\r
"Эта опция работает только с файлами G-кода, созданными в Cura 12.07 и выше."\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Ошибка загрузки профиля"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Выберите файл профиля для сохранения"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Если вы не сохранили настройки, они будут потеряны!\n"\r
"Вы на самом деле хотите выполнить сброс?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Сброс профиля"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Внимание, установка другой прошивки не гарантирует работоспособность вашего "\r
"принтера и может повредить его."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Откройте прошивку для обновления"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "У вас запущена последняя версия Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Круто!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Расширения"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Ошибка: расширение не выбрано"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Настройки программы...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "Окно печати"\r
msgid "Cura settings"\r
msgstr "Настройки Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Настройки принтера"\r
\r
msgid "Communication settings"\r
msgstr "Настройки связи"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Мастер добавления нового принтера"\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Выберите свой принтер"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Название принтера"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Не могу удалить настройки последнего принтера из Cura"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Название принтера"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
msgstr ""\r
"Нижний слой толще, чем %.2f мм (3/4 диаметра сопла) обычно приводит к "\r
"плохому результату и не рекомендуется."\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-09-29 16:02+0800\n"\r
"Last-Translator: \n"\r
"Language-Team: coloz <clz@clz.me>\n"\r
"Language: zh_Hans_CN\n"\r
"Plural-Forms: nplurals=1; plural=0;\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr ""\r
\r
msgid "Select your language:"\r
msgstr "设置你的机型"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
msgid "Select which Printrbot machine you have:"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:316\r
+msgid "Other machine information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:352\r
+msgid "Custom RepRap information"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "显示错误日志"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "正在连接打印机"\r
\r
msgid "Communication State: %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr ""\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr ""\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "运行平台调平向导..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "向导将协助你，为你的机型配置Cura"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+msgid "It will do the following steps"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "正在连接打印机"\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#, fuzzy\r
+msgid "Resume"\r
+msgstr "Reset"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "向导将协助你，为你的机型配置Cura"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "运行多喷头校正向导..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "专业设置"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "固件更新"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Cura仅支持基于ATmega2560的机型升级\n"\r
"升级固件后也许大概有可能你的打印机无法正常工作"\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "确定"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "读取固件..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "连接到打印机..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "固件上传中"\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"完成!\n"\r
"成功写入固件: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "固件写入失败\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr ""\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "读取模型文件...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "偏好配置......\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "机型设置..."\r
\r
msgid "PID Debugger..."\r
msgstr "PID调试器..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "固件更新"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "复制配置到剪切板"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "同时打印多个模型"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "逐个打印模型"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "工具"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "机型"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "切换到快速打印模式..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "切换到完整配置模式..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "额外设置...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "运行首次使用向导..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "运行平台调平向导..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "运行多喷头校正向导..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "专业设置"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "在线文档..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "问题提交..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "检查更新..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "打开YouMagine网站..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "关于Cura"\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "帮助"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "安装默认固件..."\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "安装自定义固件"\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Do you really want to reset?"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "你正在运行最新版本的的Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "插件"\r
\r
msgid "Error: no plugin selected"\r
msgstr "错误:没有插件可供选择"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "偏好配置......\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "打印窗口"\r
msgid "Cura settings"\r
msgstr "Cura设置"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "机型设置"\r
\r
msgid "Communication settings"\r
msgstr "通信设置"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "添加机型"\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "设置你的机型"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr "更改机型名称"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr ""\r
msgid "Enter the new name:"\r
msgstr "输入新的名称:"\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-msgid "Change machine name"\r
-msgstr "更改机型名称"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
"results and is not recommended."\r
msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
~ianmdlvl / cura.git / commitdiff