Add inset speeds.

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 84d7d2f85e9175645c68302e9e9c2a0229ac2ffa..f53432dea1c2478165bda64376bf15b698537022 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -186,7 +186,9 @@ setting('object_sink',               0.0, float, 'advanced', _('Quality')).setLa
 setting('overlap_dual',             0.15, float, 'advanced', _('Quality')).setLabel(_("Dual extrusion overlap (mm)"), _("Add a certain amount of overlapping extrusion on dual-extrusion prints. This bonds the different colors better together."))
 setting('travel_speed',            150.0, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Travel speed (mm/s)"), _("Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then."))
 setting('bottom_layer_speed',         20, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Bottom layer speed (mm/s)"), _("Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed."))
-setting('infill_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Infill speed (mm/s)"), _("Speed at which infill parts are printed. If set to 0 then the print speed is used for the infill. Printing the infill faster can greatly reduce printing, but this can negatively effect print quality.."))
+setting('infill_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Infill speed (mm/s)"), _("Speed at which infill parts are printed. If set to 0 then the print speed is used for the infill. Printing the infill faster can greatly reduce printing, but this can negatively effect print quality."))
+setting('inset0_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Outser shell speed (mm/s)"), _("Speed at which outer shell is printed. If set to 0 then the print speed is used. Printing the outer shell at a lower speed improves the final skin quality. However, having a large difference between the inner shell speed and the outer shell speed will effect quality in a negative way."))
+setting('insetx_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Innser shell speed (mm/s)"), _("Speed at which inner shells are printed. If set to 0 then the print speed is used. Printing the inner shell faster then the outer shell will reduce printing time. It is good to set this somewhere in between the outer shell speed and the infill/printing speed."))
 setting('cool_min_layer_time',         5, float, 'advanced', _('Cool')).setRange(0).setLabel(_("Minimal layer time (sec)"), _("Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend at least this amount of seconds printing this layer."))
 setting('fan_enabled',              True, bool,  'advanced', _('Cool')).setLabel(_("Enable cooling fan"), _("Enable the cooling fan during the print. The extra cooling from the cooling fan is essential during faster prints."))
 

diff --git a/Cura/util/sliceEngine.py b/Cura/util/sliceEngine.py
index 2909963761cf2270f148aa72fd183552bf3b53d4..16bd664b212fa5d60d29963441004add5a79e345 100644 (file)
--- a/Cura/util/sliceEngine.py
+++ b/Cura/util/sliceEngine.py
@@ -414,6 +414,8 @@ class Engine(object):
                        'initialLayerSpeed': int(profile.getProfileSettingFloat('bottom_layer_speed')),
                        'printSpeed': int(profile.getProfileSettingFloat('print_speed')),
                        'infillSpeed': int(profile.getProfileSettingFloat('infill_speed')) if int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
+                       'inset0Speed': int(profile.getProfileSettingFloat('inset0_speed')) if int(profile.getProfileSettingFloat('inset0_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
+                       'insetXSpeed': int(profile.getProfileSettingFloat('insetx_speed')) if int(profile.getProfileSettingFloat('insetx_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
                        'moveSpeed': int(profile.getProfileSettingFloat('travel_speed')),
                        'fanSpeedMin': int(profile.getProfileSettingFloat('fan_speed')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
                        'fanSpeedMax': int(profile.getProfileSettingFloat('fan_speed_max')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,