['de', 'Deutsch'],
['fr', 'French'],
['tr', 'Turkish'],
+ ['ru', 'Russian'],
# ['ko', 'Korean'],
# ['zh', 'Chinese'],
# ['nl', 'Nederlands'],
msgstr ""\r
"Project-Id-Version: PACKAGE VERSION\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"\r
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Type: text/plain; charset=CHARSET\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr ""\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
msgid "Other machine information"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
msgid "Custom RepRap information"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"it is highly recommended to improve reliability."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"and ultimately makes your printer work."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"You will get the chance to do so now."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
msgid "Bed leveling wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
msgid "It will do the following steps"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
msgid "Connect to printer"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr ""\r
\r
msgid "Expert config"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Installed firmware: %s"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
msgid "Failed to connect to programmer.\n"\r
msgstr ""\r
\r
msgid "Print...\tCTRL+P"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr ""\r
\r
msgid "Save Profile..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
msgid "Auto Firmware Update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
msgid "Add new machine..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Do you really want to reset?"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid "Profile copy"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr ""\r
\r
msgid "Error: no plugin selected"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
msgid "Preferences"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
msgid "Add new machine"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
msgid "Remove machine"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr ""\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr ""\r
\r
msgid "Error log"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:912\r
-msgid "Toolpath to SD"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:1206\r
-msgid "Overhang view not working due to lack of OpenGL shaders support."\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
+#: Cura/gui/sceneView.py:866\r
+msgid "Reset all objects positions"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
+#: Cura/gui/sceneView.py:991\r
+msgid "Toolpath to SD"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
+#: Cura/gui/sceneView.py:1285\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr ""\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr ""\r
msgid "Webcam error"\r
msgstr ""\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr ""\r
msgstr ""\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr ""\r
\r
"of perimeter lines and the thickness of those perimeter lines."\r
msgstr ""\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr ""\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr ""\r
"near your wall thickness to make an evenly strong part."\r
msgstr ""\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr ""\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr ""\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr ""\r
\r
msgstr ""\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr ""\r
\r
#: Cura/util/profile.py:189\r
+msgid "5th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"Everywhere creates support even on top of parts of the model."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"(Note that enabling the brim or raft disables the skirt)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"You can also use the 2nd extruder for soluble support materials."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"print the 2nd color."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"This means that with thinner layers, your tower gets bigger."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"number means less extrusion, a smaller number generates more extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+msgid "Diameter5 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:201\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"the filament and causes grinding issues."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"effect on delta towers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"the other layers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"time, but this can negatively affect print quality."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"and the outer shell speed will effect quality in a negative way."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"speed and the infill/printing speed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"seconds printing this layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"priming your extruder better for small objects."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"this distance."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"Note: If the line count is set to 0 this is ignored."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"than 200%."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"slowed down it will never be slower than this minimal speed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"infill."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"being horizontal and 0 degree being vertical."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"weaker support which is easier to remove. 15% seems to be a good average."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"the print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"0.15mm gives a good seperation of the support material."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"This feature used to be called Joris in older versions."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"using more material and leaving less area for your print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Surface layer thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Surface layer line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"risk."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"risk."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"Mach3 uses A,B,C instead of E for extruders."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Common values are 250000, 115200, 57600"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"Ultimaker."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"are not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"Last-Translator: Michal Vondracek <info@michalvondracek.cz>\n"\r
"Language-Team: Czech <info@3draty.cz>\n"\r
"MIME-Version: 1.0\n"\r
"X-Generator: POEditor.com\n"\r
"Language: cs\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Nalezena nová verze Cura, mám ji stáhnout?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Nová verze je dostupná"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Vyber jakou Printerbot tiskárnu máš:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
#, fuzzy\r
msgid "Other machine information"\r
msgstr "Velikost tiskového prostoru v mm."\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Jsou dostupné tyto profily tiskáren"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"zapotřebí věnovat pozornost nastavení. V případě nalezení problému s "\r
"předdefinovanými profily nebo žádosti o přidání vyplňte ticket na GitHubu."\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura je připravena k používání!"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
#, fuzzy\r
msgid "Custom RepRap information"\r
msgstr "Odesílat anonymní informace o užívání:"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
"RepRap tiskárny jsou od sebe dosti odlišné, zde můžete změnit nastavení tak, "\r
"aby odpovídalo té vaší."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr "Zkontrolujte nastavení profilu před spuštěním tisku."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
msgstr "Chcete-li zařadit profil pro svou tiskárnu vytvořte ticket na GitHubu."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Je potřeba ručně nainstalovat Marlin nebo Sprinter firmware."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Jméno tiskárny"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Šířka tiskárny (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Hloubka tiskárny (mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Výška tiskárny (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Šířka trysky (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Ohřívaný stolek"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Střed stolku je 0,0,0 (RoStock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Zvolte svou tiskárnu"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Jaký typ tiskárny máte:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
#, fuzzy\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Ostatní (např.: RepRap, MakerBot)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
msgstr "Sběr anonymních informací o užívání napomáhá při vývoji Cura."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
msgstr "NEdochází k odesílání vašich modelů ani dalších soukromých informací."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Odesílat anonymní informace o užívání:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Pro další detaily: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Jaké upgrady vlastníte?"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
msgstr "Pomůžeme vám doladit nastavení vašeho Ultimakeru. "\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Vylepšení etruderu"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr "Ohřívaná podložka (kit)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Ohrívaný stolek (samovýroba)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Dvojtryska (experimentální)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"Pokud tento upgrade nevlastníte, doporučujeme jej zakoupit pro zvýšení "\r
"spolehlivosti."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Tento upgrade můžete zakoupit v Ultimaker eshopu nebo na Thingiverse jako "\r
"věc číslo: 26094"\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Aktualizace firmware Ultimaker"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"Firmware je program řídící krokové motory, reguluje teplotu. Je srdcem 3D "\r
"tiskárny."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"Firmware dodávaný s Ultimakerem funguje, byly však vydány aktualizace "\r
"vylepšující kvalitu tisku a zjednodušující kalibraci."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"Cura tyto vlastnosti firmware vyžaduje, tedy bude nejspíše třeba firmware "\r
"aktualizovat. Právě teď je na to správná chvíle."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Neaktualizujte firmware když:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* Máte starší tiskárnu s elektronikou ATMega1280 (Rev 1)"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Jste již provedl nějaké změny v původním firmware"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Je dobrým nápadem provést pár testů. Můžete tyto testy přeskočit, jestliže "\r
"víte, že vaše tiskárna funguje správně."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Spustit testy"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Přeskočit testy"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Komunikace"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Teplota"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Koncové spínače"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Zobrazit záznam chyb"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Probíhá připojení k tiskárně."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Ochlazení před kontrolou teplot."\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Kontrola ohřívací patrony a teplotního senzoru."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Ujistěte se, že žádný z koncových spínaču není stisknutý."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Měření teploty SELHALO!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Teplota hlavy: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Stav komunikace: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Nepodařilo se navázat spojení s tiskárnou"\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Stiskněte koncový spínač nalevo X "\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Stiskněte koncový spínač napravo X "\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Stiskněte koncový spínač vpředu Y "\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Stiskněte koncový spínač nahoře Z "\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Stiskněte koncový spínač vzadu Y "\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Testy ukončeny"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Stiskněte koncový spínač dole Z "\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Kalibrace extrudéru vyžaduje pár ručních zásahů."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Ne"\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
msgstr "Zasuňte filament tak, že bude v rovině s vrškem extruderu."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "Filament se posune o 100mm"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Extrudovat 100mm filamentu."\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
msgstr "Změřte délku vyextrudovaného filamentu.(měla by být přibližně 100mm)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Uložit"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Což znamená kroků na extruderu:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "Tento proces můžete opakovat pro zpřesnění kalibrace."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Jestliže máte v tiskárně filament, které je třeaba ohřát před vyjmutím, "\r
"stistkněte tlačítko \"Ohřát pro vyjmutí\" níže."\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Ohřát pro vyjmutí filamentu"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"Chyba: Nelze otevřít seriový pot.\n"\r
"V případě že se tak děje neustále, zkuste odpojit a znovu zapojiit USB kabel."\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura je připravena k používání!"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura je připravena k používání!"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
#, fuzzy\r
msgid "Bed leveling wizard"\r
msgstr "Spustit průvodce vyrovnáním stolku"\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
#, fuzzy\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Tento průvodce ti pomůže v nastavení Cura pro tvou tiskárnu"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
#, fuzzy\r
msgid "It will do the following steps"\r
msgstr "Což znamená kroků na extruderu:"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
#, fuzzy\r
msgid "Connect to printer"\r
msgstr "Probíhá připojení k tiskárně."\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
#, fuzzy\r
msgid "Resume"\r
msgstr "Reset"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
#, fuzzy\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "Tento průvodce ti pomůže v nastavení Cura pro tvou tiskárnu"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
#, fuzzy\r
msgid "Head offset wizard"\r
msgstr "Spustit průvodce nastavením offsetu hotendů"\r
msgid "Expert config"\r
msgstr "Expert"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr "Je nám líto, ale Cura neobsahuje základní firmware pro vaši tiskárnu."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Aktualizace firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Cura podporuje pouze elektroniku založenou na ATMega2560. Takže aktualizace "\r
"pomocí Cury nemusí fungovat!"\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Čtení firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Připojování k tiskárně.."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr "Prosím přopojte tiskárnu k vašemu počítači pomocí USB kabelu."\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Nepodařilo se najít tiskárnu pro aktualizaci firmware. Je tiskárna připojená "\r
"k PC?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Nahrávám firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Hotovo!\n"\r
"Informace of firmware: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Nepodařilo se zapsat firmware\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
#, fuzzy\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Nepodařilo se kontaktovat YouMagine.com"\r
msgid "Print...\tCTRL+P"\r
msgstr "Tisk...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Uložit GCode..."\r
\r
msgid "Save Profile..."\r
msgstr "Uložit profil..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Načíst profil z GCode..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Resetovat profil do základního nastavení"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Nastavení...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Nastavení tiskárny..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Nedávné modely"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Nedávné profily"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Konec"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Soubor"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Import mapy Minecraftu..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "Ladění PID..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
#, fuzzy\r
msgid "Auto Firmware Update..."\r
msgstr "Aktualizace firmware"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Kopírovat profil do schránky"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "Tisknout vše najednou"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "Tisknout postupně"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Nástroje"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Tiskárna"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Přepnout do jednoduchého módu..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Přepnout do rozšířeného módu..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Otevřít nastavení pro experty...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Spustit průvodce vyrovnáním stolku"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Spustit průvodce nastavením offsetu hotendů"\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Dokumentace online"\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Nahlásit problém..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Zkontrolovat aktualizace..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Otevřít YouMagine stránky..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "O Cura..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Nápověda"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Pro \"Tisknout po jednom\" je třeba mít správně vyplněné údaje o velikosti "\r
"hlavy a rozměrech konstrukce v nastavení tiskárny."\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "Varování - po jednom "\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Průvodce přidáním nové tiskárny"\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "Nainstalovat základní firmware"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Nainstalovat vlastní firmware..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Vyberte profil k načtení"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Vyberte GCode z nějž bude profil načten"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Nenalezen profil v GCode. Pracuje pouze s GCode generovaným Curou 12.07 a "\r
"novější."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Chyba při načítání profilu"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Vyberte soubor profilu pro uložení"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"neuložíte, přijdete o ně.\n"\r
"Určitě resetovat?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Resetovat profil"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Resetovat profil"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Varování: Instalace vlastního firmware negarantuje funkci zařízení a může "\r
"dojít i k zničení tiskárny."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Otevřít firmware"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Používáte poslední verzi Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Skvělé!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Rozšíření"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Chyba: nebylo zvoleno rozšíření"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
#, fuzzy\r
msgid "Preferences"\r
msgstr "Nastavení...\tCTRL+,"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "Tiskové okno"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Barvy"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Řeč"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Nastavení filamentu"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Nastavení Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Nastavení tiskárny"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Velikost hotendu"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Extruder: %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Parametry komunikace"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
#, fuzzy\r
msgid "Add new machine"\r
msgstr "Průvodce přidáním nové tiskárny"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
#, fuzzy\r
msgid "Remove machine"\r
msgstr "Zvolte svou tiskárnu"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr "Změň název tiskárny"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Nelze odebrat poslední tiskárnu z Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Nelze odebrat tiskárnu"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr "Zadej nové jméno"\r
\r
msgid "Connect"\r
msgstr "Připojit"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Tisknout"\r
\r
msgid "Error log"\r
msgstr "Chyby"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Načíst"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Otocit"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Zmenit velikost"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Zrcadlit"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Reset"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Polozit"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Na max"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Zrcadlit podle X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Zrcadlit podle Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Zrcadlit podle Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Zmenit velikost v X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Zmenit velikost v Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Zmenit velikost v Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Zmenit velikost v X (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Zmenit velikost v Y (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Zmenit velikost v Z (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Dodrzovat proporce"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Zobrazeni"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normální"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Previsy"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Pruhledny"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Rentgen"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Vrstvy"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Sdílet na YouMagine"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Otevřít 3D model"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Uložit 3D model"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "Tisknout na %s"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Loig sliceru"\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Uložit cestu"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Slicer vrátil"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Log sliceru"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Kolik kopií?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Počet kopií"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "Duplikovat"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Do středu stolku"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Smazat objekt"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Duplikovat objekt"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Rozdělit objekt na části"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Spojit do dvoubarevného modelu"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Smazat vše"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr "Znovu načíst vše"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Smazat vše"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Uložit na SD"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr "Zborazení převisů není funkční, protože není podpora OpenGL shaderů-"\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Kvalitní tisk"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normální tisk"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Rychlý tisk"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Tenkostěnný hrnek či váza"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Tisknout s podporou"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "Vyberte si profil"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Materiál:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Průměr:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Ostatní:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Pouze vnějšek"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "Výška (mm)"\r
msgid "Webcam error"\r
msgstr "Chyba webkamery"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Nahrávám dráhy nástroje pro vizualizaci (% d%%)"\r
msgstr "Chyba 3D vykreslování"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Kvalita"\r
\r
"Tloušťka vnější stěny. V kombinaci s šířkou trysky určuje počet vnějších "\r
"obrysů a jejich šíři."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Retrakce"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Povolit retrakce"\r
"Je rozumné nastavit tuto hodnotu na násobek šířky vrstvy pro roznoměrně "\r
"pevný model mějte tuto hodnotu podobnou tloušťce vnější vrstvy."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Výplň"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Hustota výplně (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Rychlost a teplota"\r
\r
msgstr "Teplota tisku (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Teplota čtvrté trysky (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Teplota třetí trysky (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Teplota ohřívací podložky (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Teplota použitá pro vyhřívané lůžko tiskárny. Nastavte na 0 pro manuální "\r
"nastavení."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Podpora"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Typ podpory"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"dotkne modelu.\n"\r
"\"Všude\" vytváří podporu i na horní části modelu."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Okraj"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Raft"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Vylepšení přilnavosti"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"objektem. \n"\r
"(Povolený \"Brim\" nebo \"Raft\" zakáže \"Skirt\")"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "Oba"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "První extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "Druhý extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Podpora dvojtrysky"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"V případě, že jeden z materiálů je dražší, je vhodné použít ten levnější pro "\r
"podpory. Vedlejším efektem je častější změna extruderů."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "Dvojtryska"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
#, fuzzy\r
msgid "Wipe&prime tower"\r
msgstr "Otírací komínek"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"Tryska co dotisknula se otře o tuto podporu předtím, než druhá začne "\r
"tisknout."\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
#, fuzzy\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "Objem otíracího komínku na jedné vrstvě (mm3)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"protože je třeba vyextrudovat určitý objem materiálu, bez ohledu na výšku "\r
"vrstvy."\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "Otírací ohrádka"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"Otírací ohrádka je objekt o šířce jedné linky, který se vytiskne okolo "\r
"objektu. O tuto ohrádku se pak otírají ukapávající trysky."\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Filament"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Průměr (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"Průměr filamentu co nejpřesněji. Vyšší číslo znamená méně vytlačovaného "\r
"materiálu."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Průměr 2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Průměr filamentu pro druhou trysku. Vložte 0 pro shodný průměr s první "\r
"tryskou."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Průměr 3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Průměr filamentu pro třetí trysku. Vložte 0 pro shodný průměr s první "\r
"tryskou."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Průměr 4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Průměr filamentu pro čtvrtou trysku. Vložte 0 pro shodný průměr s první "\r
"tryskou."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Průměr (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Průměr filamentu pro třetí trysku. Vložte 0 pro shodný průměr s první "\r
+"tryskou."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Rychlost extruderu (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Kompenzace toku plastu, množství vytlačovaného materiálu je vynásobeno touto "\r
"hodnotou."\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Retrakce"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Rychlost (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"Rychlost jakou se provádí retrakce, vyšší rychlosti fungují lépe. Avšak moc "\r
"rychlá retrakce může ohoblovat materiál."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Vzdálenost (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
msgstr "Délka retrakce, 0 - bez retrakce. Pro Ultimaker se doporučuje 4.5mm"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Délka retrakce při výměně trysky (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"Délka retrakce když se vymění trysky, 0 - žádná retrakce. Hodnota 16mm se "\r
"zdá být fajn."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Minimální přejezd (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Minimální vzdálenost kterou musí tryska urazit aby se retrakce stala. U "\r
"malých objektů se tak snížuje počet retrakcí."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Povolit Vyhýbání"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Vyhýbání je způsob jak zabránit přejezdům trysky nad vnitřními dírami "\r
"objektu. Tryska pak jezdí jen po oblastech výplně. Při vypnutém Vyhýbání, se "\r
"tisková hlav pohybuje přímo z bodu do bodu a vždy dojde k retrakci."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Minimální extruze před retrakcí (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"Tato volba snižuje počet retrakcí na stejném místě. Čímž zabraňuje možnému "\r
"prodření filamentu."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "Zvednout trysku v ose Z při retrakci (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"tiskem. Hodnota 0.075 funguje dobře. Tato vlastnost přináší mnoho "\r
"pozitivních efektů u delta tiskáren."\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Tloušťka první vrstvy (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"Tloušťka spodní vrstvy. Tlustější vrstva lépe drží na podložce. Hodnota 0 "\r
"znamená stejnou tloušťku jako ostatní vrstvy."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr "Šířka čáry (%) při první vrstvě"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"Extra šířka pro první vrstvu. Pro některé tiskárny je výhodné mít první "\r
"vrstvu širší než ostatní, model se pak lépe přichytí k podložce."\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Zanořit objekt (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
msgstr ""\r
"Zanoří objekt do podložky, používá se u objektů, které nemají rovný spodek."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Přesah při dual extrusion (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"Úroveň překryvu při dual-extruzi. Tím dochází k propojení jednotlivých barev/"\r
"materiálů k sobě."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Rychlost"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Rychlost přesunu (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"Rychlost netiskových posuvů. Dobře nastavená tiskárna dosahuje rychlosti až "\r
"250mm/s. Některé tiskárny však mohou ztrácet kroky."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Rychlost tisku první vrstvy (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Rychlost tisku spodní vrstvy. První vrstva se většinou tiskne pomaleji, aby "\r
"se dobře přichytila na podložku."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Rychlost tisku výplně (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"Rychlejší tisk výplní může snížit čas tisku, avšak může se i negativně "\r
"podepsat na kvalitě výtisku."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Rychlost tisku první vrstvy (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Rychlost výplně. 0 znamená stejnou rychlost jako je základní tisková. "\r
+"Rychlejší tisk výplní může snížit čas tisku, avšak může se i negativně "\r
+"podepsat na kvalitě výtisku."\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Rychlost tisku vnějších kontur (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"v případě moc rozdílných rychlostí vnitřních a vnějších částí, může naopak "\r
"kvalitu výsledného výtisku zhoršit."\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Rychlost tisku vnitřních kontur (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"dobu tisku. Je vhodné nastavit tuto rychlost přibližně mezi rychlost "\r
"vnějších obrysů a rychlost tisku výplně."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Chlazení"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Minimální doba tisku vrstvy (sekundy)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"bude minimálně tato určená. Tato volba dává čas předchozí vrstvě, aby "\r
"dostatečně zchladla, než se na ní začne vrstvit další."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Používat větráček pro chlazení"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Povolit ventilátor při tisku. Chlazení modelu pomůže při rychlejších "\r
"tiscích, a nižších vrstvách. Především vhodné pro PLA."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Počet objetí"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"Nastavení na 0 sukénku zakáže. Více sukénkové řádky mohou pomoci připravě "\r
"extruderu pro malé objekty."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Vzdálenost od modelu (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"Je to minimální vzdálenost, pokud bude více perimetrů sukénky, budou "\r
"přibývat z vnějšku."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Minimální délka (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"další sukénky, dokud se jí nedosáhne. \n"\r
"Poznámka: Pokud je nastavena 0, volba ignorována."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "Spustit větrák naplno ve výšce (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"Výška, ve které je ventilátor na 100%. Pro nižší vrstvy je rychlost "\r
"ventilátoru řízena lineárně. Na vrstvě 0 je ventilátor vypnut"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Minimální rychlost větráku (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"tisku, spustí se větrák rychlostí mezi min a max. Minimální rychlost větráku "\r
"se používá, když nedojde ke zpomalení tisku vrstvy pro její ochlazení."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Maximální rychlost větráku (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"tisku, spustí se větrák rychlostí mezi min a max. Maximální rychlost větráku "\r
"se používá, když dojde ke zpomalení tisku vrstvy o 200% pro její ochlazení."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Minimální rychlost (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"žačne tryska odkapávat. Minimální rychlost tisku má tomuto jevu zabránit. I "\r
"když je tisk zpomalen, nikdy jeho rychlost nesmí klesnout pod tuto minimální."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Přizvednutí trysky pro ochlazení"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"Při použití této volby dojde k nadzvednutí hlavy a posečkání do nastavené "\r
"minimální doby tisku."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Výplň"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Plná výplň vršku"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"Tiskne plnou výplní vršek modelu. Není-li volba použita, vršek se vytiskne "\r
"tak hustě, jak je nastavena výplň."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Plná výplň spodku"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Tiskne plnou výplní spodek modelu. Není-li volba použita, spodek se vytiskne "\r
"tak hustě, jak je nastavena výplň."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Přesah výplně (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"Velikost překryvu výplně a obrysů. Tato volba zajišťuje že dojde k propojení "\r
"obrysů a výplně."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "Druh struktury"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"druhé. Znamená to víc práce při odlamování, ale jsou méně pevné. Funguje "\r
"lépe na složitější modely."\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "Úhel převisu pro který se tvoří support (stupně)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
#, fuzzy\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"Minimální úhel pro stavbu podpor. 0 stupňů znamená horizontálně, 90 "\r
"vertikálně"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Úroveň výplně"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"Hustota výplně podpor. Méně materiálu znamená křehčí podporu, která se lépe "\r
"odlamuje. 15% se zdá být dobrým průměrem-"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Vzdálenost X/Y (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"Vzdálenost podpěr od výtisku, ve směrech X / Y. \n"\r
"Dopodučeno je 0,7 mm, podpěry se pak nelepí k výtisku."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Vzdálenost Z (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"odstranit podpěru, ale je tisk tnevzhlednější. \n"\r
"Doporučeno je 0,15 mm.u."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "Tisknout do spirály"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"objekt s tloušťkou vnější stěny na jednu trysku. Tato možnost se ve starších "\r
"verzích nazývala Joris."\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr "Pouze okraje"\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr "Pouze obrysy. Žádné plnění, ani vršek, ani spodek ... nic."\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Počet linek pro Obrys"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"Množství linek použitý pro Obrys. Víc linek znamená větší obrys, který se "\r
"lépe přichytí, ale zároveň zmenšuje tiskovou plochu."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Extra okraj (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"vzdálenosti vytvoří silnější raft avšak ubírá tak na velikosti tisknutelné "\r
"plochy."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Vzdálenost linek (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr "Používáš-li raft, toto je vzdálenost mezi středy linek raftu."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Tloušťka základny (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr "Používáš-li raft, toto je tloušťka základní vrstvy."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Šířka tištěné linky (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr "Používáš-li raft, toto je šířka linek základní vrstvy."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Tloušťka druhé vrstvy (tenké) raftu (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr "Používáš-li raft, toto je tloušťka druhé vrstvy raftu."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Šířka linek druhé vrstvy raftu (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr "Používáš-li raft, toto je šířka linek druhé vrstvy raftu."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr "Vzduchová mezera"\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
#, fuzzy\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"Mezírka mezi poslední vrstvou raftu a modelem. Malinká mezírka 0.2mm funguje "\r
"skvěle na PLA a zajistí jednoduché odlomení raftu."\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr "Povrchové vrstvy"\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr "Počet vrstev nad raftem. Tyto vrstvy jsou s plnou výplní."\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Tloušťka první vrstvy (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Šířka linek druhé vrstvy raftu (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Opravovat"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Vše spojit (Typ A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"* Typ-B ignoruje všechny vnitřní otvory a drodržuje pouze vnejší okraj, vždy "\r
"v rámci vrstvy"\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Vše spojit (Typ B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Ponechat otevřené stěny"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"rozřezání i modelů, u kterých ostatní algoritmy selhávají. \n"\r
"Tato volba může vést k nepředvídatelným výsledkům."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Zalátání všeho"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"Stejně tak jako všechny volby automatické opravy i tato může vést k "\r
"nepředvídatelným výsledkům."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Ulož profil řezání"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr "Ulož profil řezání s jménem modelu [stl_file]_profile.ini"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Cena cena za kg"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr "Cena 1kg vašeho vlákna, pro odhad nákladů tisku."\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Cena za metr"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr "Cena 1m vašeho vlákna, pro odhad nákladů tisku."\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Autodetekce SD karty"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"Automatická detekce SD karty. Lze vypnout, protože na některých systémech "\r
"jsou externí hard-disky nebo USB flash disky detekovány jako SD karta."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Kontrolovat aktualizace"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Kontrolovat aktualizace při startu Cura"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Zasílat statistické informace"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Odesílat anonymní informace o užívání, data budou použitá pro vylepšení "\r
"budoucích verzí."\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Hustota (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"Váha filamentu na metr krychlový. Okolo 1240 pro PLA, 1040 pro ABS. Tato "\r
"hodnota slouží pro výpočet přibližné váhy modelu."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr "Změna jazyka. Pro přepnutí je nutné restartovat Cura."\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Barva modelu"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "Barva zobrazení 1. extruderu"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Barva modelu 2"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "Barva zobrazení 2. extruderu"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Barva modelu 3"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "Barva zobrazení 3. extruderu"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Barva modelu 4"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "Barva zobrazení 4. extruderu"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "Typ okna tisku"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "Vyberte USB rozhraní kde je připojena tiskárna."\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Maximální šířka (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Velikost tiskového prostoru v mm."\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Maximání hloubka (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Maximální výška (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "Střed 0,0"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr "Firmware definuje střed podložky 0,0 místo předního rohu."\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "Tvar tiskové plochy"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "Tvar tiskové oblasti"\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Pokud máte vyhřívané lůžko, je povoleno nastavení vyhřívání (vyžaduje "\r
"restart)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "Typ G-Code"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"BFB typ generuje G-code na základě RPM.\n"\r
"Mach3 používá A,B,C místo E pro extrudery."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Počet extruderů"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Počet extruderů vaší tiskárny"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "Posunutí v X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "Vzdálenost 2. extruderu od 1."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Posunutí v Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "Vzdálenost 3. extruderu od 1."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "Vzdálenost 4. extruderu od 1. "\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "Počet kroků motoru extruderu na 1mm."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Počet kroků na mm vytlačovaného vlákna. Pokud je nastavena 0 a pak je "\r
"použita hodnota ve firmwaru."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Sériový port"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Sériový port použítý pro komunikaci s tiskárnou"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Přenosová rychlost (bd)"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Musí odpovídat nastavení firmwaru \n"\r
"Běžné hodnoty jsou 250000, 115200, 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Pozice trysky v extruderu - X min (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"trysky k vnější hraně hlavy. 75mm je pro Ultimaker, když je větrák na levé "\r
"straně."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Pozice trysky v extruderu - Y min (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"trysky k vnější hraně hlavy. 18mm je pro Ultimaker, když je větrák na levé "\r
"straně."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Pozice trysky v extruderu - X max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Pozice trysky v extruderu - Y max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"trysky k vnější hraně hlavy. 35mm je pro Ultimaker, když je větrák na levé "\r
"straně."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Výška tiskového prostoru (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"Výška portálu držící tiskovou hlavu. V případě, že je objekt vyšší než tato "\r
"hodnota, nelze vytisknout více objektů postupně. Ultimaker používá 60mm"\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, fuzzy, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr "Vyšší tok než 150% je podivný a nedoporučený."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, fuzzy, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr "Nižší tok než 50% je podivný a nedoporučený."\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"Vrstvy vyšší než %.2fmm (80%% šířky trysky) většinou podávají horší výsledky "\r
"a nejsou doporučované."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
"Je velmi nepravděpodobné, že vaše tiskárna může dosáhnout rychlosti posuvu "\r
"nad 150 mm/s"\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr "Teploty nad 260C mohou zničit vaši tiskárnu, opatrně!"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"Jsi si jistý, že vaše vlákno má tento průměr? Normální vlákno má průměr "\r
"kolem 3 mm nebo 1,75 mm."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
"Je velmi nepravděpodobné, že vaše tiskárna může dosáhnout rychlosti posuvu "\r
"nad 300 mm/s"\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, fuzzy, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr ""\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Kopírovat profil do schránky"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Kvalitní tisk"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normální tisk"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Rychlý tisk"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Tenkostěnný hrnek či váza"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Průměr:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Pouze vnějšek"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Spustit průvodce prvním spuštěním"\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2014-10-16 14:55+0100\n"\r
"Last-Translator: Mischa Fürst <mischa.fuerst@gmail.com>\n"\r
"Language-Team: Deutsch <mischa.fuerst@gmail.com>\n"\r
"X-Generator: Poedit 1.6.9\n"\r
"Plural-Forms: nplurals=2; plural=(n != 1);\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
"Eine neue Version von Cura ist verfügbar, möchten Sie diese herunterladen?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Neue Version verfügbar"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Welchen Printrbot haben Sie:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
msgid "Other machine information"\r
msgstr "Weitere Geräte Informationen"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Die folgenden Drucker Profile sind verfügbar"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"erzielen,\n"\r
"oder überhaupt funktionieren. Kleine Anpassungen können notwendig sein."\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr "Benutzerdefiniert..."\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr "Cura ist bereit!"\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura kann nun verwendet werden!"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
msgid "Custom RepRap information"\r
msgstr "Benutzerdefinierte RepRap Informationen"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
"RepRap-Geräte sind sehr verschieden. Deshalb können Sie hier Ihre "\r
"Einstellungen vornehmen."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
"Überprüfen Sie das Standard Profil bevor Sie es auf Ihrem Drucker verwenden."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Wünschen Sie ein Standard-Profil für Ihr Gerät,\n"\r
"bitte melden Sie sich via github."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Sie müssen die Marlin- oder Sprinter-Firmware manuell installieren."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Name des Geräts"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Breite des Geräts (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Tiefe des Geräts (mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Höhe des Geräts (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Größe der Druckdüse (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Beheizter Drucktisch"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Zentrum des Drucktischs ist 0,0,0 (RoStock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Wählen Sie ihr Gerät aus"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Welchen Typ Maschine haben Sie:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Andere (z.B.: RepRap, MakerBot, Witbox)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
"Das Sammeln von anonymen Informationen zur Verwendung hilft bei der weiteren "\r
"Entwicklung von Cura."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"Es werden KEINE Modelle und KEINE Personendaten gesammelt und/oder "\r
"hochgeladen."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Sende anonyme Informationen zur Verwendung:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Für mehr Informationen: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Wählen Sie die vorhandenen Upgrades"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"benötigen wir Informationen zu den Upgrades welche an Ihren Gerät "\r
"installiert sind."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Upgrade des Extruder-Antriebs"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr "Beheizter Drucktisch (offiziell)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Beheizter Drucktisch (Eigenbau)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Zwei Druckdüsen (experimentell)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"dieses Upgrade verfügen, empfehlen wir Ihnen dieses aus Gründen der "\r
"Zuverlässigkeit nachzurüsten."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Dieses Upgrade können Sie im Ultimaker-Webshop kaufen,\n"\r
"oder auf Thingiverse als thing:26094 finden."\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Ultimaker Firmware aktualisieren"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"Diese Firmware steuert die Schrittmotoren, regelt die Temperatur.\n"\r
"Sie ist das Herzstück Ihres 3D-Druckers."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"Updates ermöglichen aber bessere Druckresultate und eine einfache "\r
"Kalibrierung."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"muss die Firmware Ihres Geräts aktualisiert werden.\n"\r
"Sie können dies nun direkt erledigen."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Laden Sie diese Firmware nicht, wenn:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* Sie eine ältere, ATMega1280 basierte Maschine besitzen"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr "* Bauen Sie Ihren eigenen beheizten Drucktisch"\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Sie andere Anpassungen in der Firmware vorgenommen haben"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr "Ultimaker Überprüfung"\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Wir empfehlen eine Reihe von Funktionstests Ihres Ultimakers.\n"\r
"Sie können diese Tests überspringen, wenn Ihr Gerät einwandfrei funktioniert."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Tests starten"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Überspringe die Tests"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Kommunikation:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Temperatur:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Endstopps:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Zeige Fehlerbericht"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Verbinde mit Maschine."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Abkühlen vor dem Temperaturtest"\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Überprüfe das Heizelement und den Temperatursensor."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Bitte stellen Sie sicher, dass keiner der Endstopps gedrückt ist."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Temperaturmessung FEHLGESCHLAGEN!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Temperatur Druckkopf: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Kommunikations-Status: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Konnte keine Verbindung zum Drucker aufbauen."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Bitte drücken Sie den linken X Endstop."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Bitte drücken Sie den rechten X Endstop."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Bitte drücken Sie den vorderen Y Endstop."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Bitte drücken Sie den oberen Z Endstop."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Bitte drücken Sie den hinteren Y Endstop."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Funktionstests abgeschlossen"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Bitte drücken Sie den unteren Z Endstop."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr "Ultimaker Kalibrierung"\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Das Kalibrieren der Schritte pro E benötigt manuelle Aktionen."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Entfernen Sie zunächst alles Druckmaterial aus Ihrem Gerät."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"dass die Spitze auf der selben Höhe wie das obere Ende des Vorschub-"\r
"Mechanismus ist."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "Druckmaterial wird um 100mm vorgeschoben"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "100mm Druckmaterial extrudieren"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Messen Sie nun bitte die Menge des extudierten Druckmaterials:\n"\r
"(kann kürzer oder länger als 100mm sein)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Speichern"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Dies ergibt folgende Schritte pro E:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr ""\r
"Sie können diese Schritte wiederholen, um eine bessere Kalibrierung zu "\r
"erreichen."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Möchten Sie im Drucker verbliebenes Druckmaterial entfernen,\n"\r
"drücken Sie bitte den Knopf unten, um die Druckspitze dafür aufzuheizen."\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Aufheizen zum Entfernen des Druckmaterials"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"Fehler: Serieller Port zum Gerät konnte nicht geöffnet werden\n"\r
"Besteht dieses Problem wiederholt, stecken Sie das USB-Kabel neu ein."\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr "Ultimaker 2"\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr "Herzlichen Glückwunsch zu Kauf Ihres brandneuen Ultimaker 2."\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura kann nun mit Ihrem Ultimaker 2 verwendet werden!"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr "Lulzbot TAZ/Mini"\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura kann nun mit Ihrem Lulzbot verwendet werden!"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr "Konfigurations Assistent"\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
msgid "Bed leveling wizard"\r
msgstr "Drucktisch-Ausrichtungs-Assistent"\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Dieser Assistent wird Ihnen helfen den Drucktisch zu kalibieren"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
msgid "It will do the following steps"\r
msgstr "Es werden folgende Schritte durchgeführt"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr "* Bewegt den Druckkopf in jede Ecke"\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr "und lässt Sie den Abstand zwischen Druckdüse und Drucktisch einstellen"\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
"* Druckt eine Linie um den Drucktisch um die Ausrichtung des Tisches zu "\r
"überprüfen"\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
msgid "Connect to printer"\r
msgstr "Verbinden mit Maschine."\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr "Fortsetzen"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr "0,2mm nach oben"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr "0,2mm nach unten"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr "10mm nach oben"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr "10mm nach unten"\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr "Druckkopf in Startposition bringen..."\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr "Bewege Druckkopf in die hintere Mitte..."\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr "Bewege Druckkopf in die hintere linke Ecke..."\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr "Bewege Druckkopf in die vordere rechte Ecke"\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr "Bewege Druckkopf in die hintere rechte Ecke..."\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr "Drucker aufheizen..."\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr "Drucke ein Quadrat mit 0,3mm Schichthöhe."\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"des Drucktisches so ein, dass die Düse\n"\r
" den Tisch gerade so berührt"\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"des Drucktisches so ein, dass die Düse\n"\r
" den Tisch gerade so berührt"\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"des Drucktisches so ein, dass die Düse\n"\r
" den Tisch gerade so berührt"\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"des Drucktisches so ein, dass die Düse\n"\r
" den Tisch gerade so berührt"\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"des Drucktisches so ein, dass die Düse\n"\r
" den Tisch gerade so berührt"\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr "Drucker aufheizen: %d/%d"\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
"Der Drucker ist nun aufgeheizt. Bitte führen Sie etwas PLA Filament in den "\r
"Drucker."\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
"Benutzen Sie die nach oben/nach unten Knöpfe um den Drucktisch zu bewegen "\r
"und den Z Endstop einzustellen"\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
"Kalibrierung abgeschlossen.\n"\r
"Die Quadrate auf dem Drucktisch sollten sich leicht berühren."\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
"Dieser Assistent wird Ihnen helfen die Versatz für Ihren Dual-Druckdüsen-"\r
"Drucker zu kalibrieren"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr "Drucke Erst-Kalibierungs-Kreuz."\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr "Bitte messen Sie den Abstand der horizontalen Linien in Millimetern."\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr "Drucke Feinkalibrierungslinien."\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
"Welche horizontale Liniennummer liegt perfekt aufeinander? der Vorderste ist "\r
"null."\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr "Kalibrierung abgeschlossen. Versätze sind %s %s"\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr "Bitte bestücken Sie bei Extruder mit PLA."\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr "Bringe Druckkopf in Startposition und heize beide Extruder auf."\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr "Bitte messen Sie den Abstand der vertikalen Linien in Millimetern."\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
"Welche vertikalen Liniennummern liegen Perfekt aufeinander? Die Linie ganz "\r
"links ist null."\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr "Assistent für den Druckkopfversatz"\r
\r
msgid "Expert config"\r
msgstr "Experten Einstellungen"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Bitte entschuldigen Sie, Cura enthält keine Standard-Firmware für Ihre "\r
"Geräte-Konfiguration."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Firmware-Aktualisierung"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Cura unterstützt nur ATMega2560 basierte Hardware.\n"\r
"Das Update wird womöglich nicht funktionieren."\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Lese Firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Verbinde zum Gerät..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr "Bitte verbinden Sie Ihren Drucker via USB mit Ihrem Computer"\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Konnte Gerät für Firmware-Aktualisierung nicht finden\n"\r
"Ist das Gerät mit dem PC verbunden?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Die Firmware ist nicht mit dem Gerät kompatibel.\n"\r
"Versuchen Sie eine UMO Firmware auf einen UM2 oder UMO+ zu installieren?"\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Die Firmware ist nicht mit dem Gerät kompatibel.\n"\r
"Versuchen Sie eine UM2 oder UMO+ Firmware auf einen UMO zu installieren?"\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Hochladen der Firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Geschafft!\n"\r
"Firmware installiert: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Schreiben der Firmware fehlgeschlagen.\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Fehler bei Verbindung mit Programmer.\n"\r
\r
msgid "Print...\tCTRL+P"\r
msgstr "Drucken...\tSTRG + P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Speichere GCode..."\r
\r
msgid "Save Profile..."\r
msgstr "Speichere Profil..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Lade Profil aus GCode..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Profil auf Standard zurücksetzen"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Voreinstellungen...\tSTRG + ,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Geräte-Einstellungen..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Letzte Modelle"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Letzte Profile"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Beenden"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Datei"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Minecraft Karten Import..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "PID Debugger..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
msgid "Auto Firmware Update..."\r
msgstr "Automatische Firmware-Aktualisierung"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Kopiere Profil in Zwischenablage"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "gleichzeitig Drucken"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "nacheinander Drucken"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Werkzeuge"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Maschine"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Wechseln zum Schnelldruck..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Wechseln zum Expertenmodus..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Öffne Experten-Einstellungen...\tSTRG + E"\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Drucktisch-Ausrichtungs Assistent aufrufen..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Assistent für den Druckkopfversatz aufrufen..."\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Experte"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Online-Dokumentation..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Fehler melden..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Prüfe auf Update..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Website YouMagine öffnen..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "Über Cura..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Hilfe"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Für \"nacheinander Drucken\", müssen die Einträge für Druckkopf- und Portal "\r
"richtig gesetzt sein"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "nacheinander Drucken Warnung"\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Neues Gerät hinzufügen"\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "Installiere Standard Marlin Firmware..."\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Installiere benutzerdefinierte Firmware..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Wählen Sie die Profil-Datei zum Laden"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Wählen Sie die GCode-Datei zum Laden des Profils"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Diese Funktion ist nur bei GCode-Dateien verfügbar, welche mit Cura ab "\r
"Version 12.07 erstellt wurden."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Fehler beim Laden des Profils"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Wählen Sie die Profil-Datei zum Speichern aus"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"verloren!\n"\r
"Wollen Sie die Profil-Einstellungen wirklich zurücksetzen?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Profil zurücksetzen"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Profil zurücksetzen"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"nicht automatisch die Funktionstüchtigkeit ihres Geräts, und kann zu "\r
"Beschädigungen an Ihrem Gerät führen."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Firmware zum Hochladen auswählen"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Sie verwenden die aktuellste Version von Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Sehr gut!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr "Grundlegend"\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr "Fortgeschritten"\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Erweiterungen"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Fehler: Keine Erweiterung ausgewählt"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
msgid "Preferences"\r
msgstr "Voreinstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "Drucken"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Farben"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Sprache"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Druckmaterial-Einstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Cura-Einstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Maschinen-Einstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Grösse des Druckkopfs"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Extruder %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Verbindungs-Einstellungen"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr "OK"\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
msgid "Add new machine"\r
msgstr "Neues Gerät hinzufügen"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
msgid "Remove machine"\r
msgstr "Gerät entfernen"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr "Name des Geräts ändern"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Kann die letzte Gerätekonfiguration nicht aus Cura entfernen"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Fehler: Gerät entfernen"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr "Neuen Namen eingeben:"\r
\r
msgid "Connect"\r
msgstr "Verbinden"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Drucken"\r
\r
msgid "Error log"\r
msgstr "Fehlerbericht"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Laden"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Drehen"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Skalieren"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Spiegeln"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Zurücksetzen"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Flach legen"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Maximieren"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Spiegeln an X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Spiegeln an Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Spiegeln an Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Skalierung X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Skalierung Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Skalierung Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Größe X (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Größe Y (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Größe Z (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Proportional"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Ansicht"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normal"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Überhänge"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Transparent"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Röntgen"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Schichten"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Auf YouMagine teilen"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Öffne 3D-Modell"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Speichere 3D-Modell"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "Drucke mit %s"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Bericht der Slicing-Engine..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Speichere Maschinencode"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Die Slicing-Engine meldete folgendes"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Bericht der Engine..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Wie viele Kopien wollen Sie?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Anzahl der Kopien"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "Vervielfachen"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Auf Plattform zentrieren"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Lösche Objekt"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Vervielfache Objekt"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Teile Objekt auf"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Doppelextrusion Verbindung"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Lösche alle Objekte"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr "alle Objekte neu laden"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Lösche alle Objekte"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Maschinencode auf SD-Karte"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
"Die Überhang-Ansicht funktioniert nicht, da auf Ihrem Computer keine OpenGL "\r
"Shader unterstützt werden."\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Hohe Qualität"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normale Qualität"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Niedrige Qualität"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Dünnwandige Schale oder Vase"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Stützmaterial drucken"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "Vordefiniertes Profil wählen:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Material:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Durchmesser:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Weiteres:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Nur Außen"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "Schichtdicke (mm)"\r
msgid "Webcam error"\r
msgstr "Webcam Fehler"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Lade Maschinencode zur Visualisierung... (%d%%)"\r
msgstr "Fehler: 3D-Fenster"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Qualität"\r
\r
"Aus der Kombination dieser Einstellung mit der Größe der Druckdüse\n"\r
"wird die Anzahl der benötigten Umrisslinien und deren Dicke ermittelt."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Rückzug"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Rückzug einschalten"\r
"ihn mit der Stärke der Aussenhülle ab, um ein ungefähr gleichstarkes "\r
"Druckobjekt zu erhalten."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Füllung"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Fülldichte (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Geschwindigkeit und Temperatur"\r
\r
msgstr "Drucktemperatur (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "4te Druckdüse Temperatur (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "3te Druckdüse Temperatur (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Temperatur Drucktisch (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Temperatur welche für den beheizten Drucktisch verwendet wird. Wählen Sie 0, "\r
"wenn Sie den Drucktisch manuell aufheizen."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "keine"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "vom Drucktisch aus"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "überall"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Stützmaterial"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Art des Stützmaterials"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"Überall erzeugt Stützmaterial, welches auch auf Teilen des Modells selber "\r
"aufbaut."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Rand"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Gitter"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Platform Adhäsionstyp"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"hinzu.\n"\r
"(Wählen Sie Rand oder Gitter, deaktivieren Sie damit automatisch den Rock)"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "Beide"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "Erster Extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "Zweiter Extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Stützmaterial Doppelextrusion"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"zu drucken, als das Objekt selber.\n"\r
"Dadurch entstehen allerdings mehr Extruder-Wechsel."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "Doppelextrusion"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr "Abstreichturm"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"genutzt wird \n"\r
"um die alte Düse \"sauber zu wischen\""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "Abstreichturm Volumen pro Druckschicht (mm3)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"Dies ist unabhängig von der Schichthöhe also dünne Schichten bedeuten\n"\r
"einen dickeren Abstreichturm"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "Überlaufschild"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"Der Überlaufschild ist eine einwandige Hülle um das Objekt\n"\r
"dieser fängt überlaufendes Material aus der nicht benutzten Düse ab."\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Druckmaterial"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Durchmesser (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"durch Ausprobieren herausfinden. Ein höherer Wert bedeutet weniger Material-"\r
"Vorschub, ein kleinerer Wert mehr Material-Vorschub."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Durchmesser2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Durchmesser des Druckmaterials für die zweite Druckdüse. Verwenden Sie den "\r
"Wert 0, um den selben Durchmesser wie bei Druckdüse 1 zu verwenden."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Durchmesser3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Durchmesser des Druckmaterials für die dritte Druckdüse. Verwenden Sie den "\r
"Wert 0, um den selben Durchmesser wie bei Druckdüse 1 zu verwenden."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Durchmesser4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Durchmesser des Druckmaterials für die vierte Druckdüse. Verwenden Sie den "\r
"Wert 0, um den selben Durchmesser wie bei Druckdüse 1 zu verwenden."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Durchmesser (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Durchmesser des Druckmaterials für die dritte Druckdüse. Verwenden Sie den "\r
+"Wert 0, um den selben Durchmesser wie bei Druckdüse 1 zu verwenden."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Fluss (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Flusskompensation, die Menge an zu extrudierendem Druckmaterial ist mit "\r
"diesem Wert multipliziert "\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Rückzug"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Geschwindigkeit (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"höhere Rückzugsgeschwindigkeit funktioniert besser, kann allerdings zu "\r
"Abrieb am Druckmaterial durch den Extruder führen."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Distanz (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"Rückzugslänge, ein Wert von 0 führt zu keinem Rückzug. Ein Wert von 4.5mm "\r
"liefert gute Druckresultate."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Rückzug bei Doppelextrusion Umschaltung (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"ein Wert von 0 führt zu keinem Rückzug. Ein Wert von 16.0mm scheint gute "\r
"Druckresultate zu liefern."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Minimale Leerfahrt-Distanz (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"damit überhaupt ein Rückzug des Druckmaterials gemacht wird. Verhindert zu "\r
"häufigen Rückzug auf kleiner Fläche."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Löcher umfahren"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Lässt den Druckkopf nicht direkt über Löcher im Druckobjekt leer "\r
"drüberfahren. Wenn diese Option ausgeschaltet ist, fährt der Druckkopf auf "\r
"gerader Linie vom Anfangs- zum Endpunkt und das Druckmaterial wird dabei "\r
"immer zurückgezogen."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Minimaler Vorschub vor nächstem Rückzug (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"selben Stelle, was sonst zum Abflachen und zu Abrieb des Druckmaterials "\r
"führen kann."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "Z anheben vor Rückzug (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"Ein Wert von 0,075 funktioniert gut.\n"\r
"Hat einen großen positiven Effekt bei Delta Tower Druckern."\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Dicke der ersten Schicht (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"dem Drucktisch. Wählen Sie den Wert 0.0, um die erste Schicht genau so dick "\r
"zu drucken wie die anderen Schichten."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr "Linienabstand der ersten Schicht (%)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"Abstand zwischen den Bahnen der ersten Schicht. Bei manchen Druckern sorgt "\r
"ein größerer Abstand für bessere Haftung des Druckobjekts."\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Objekt unten abschneiden (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"Versenkt das Objekt um diesen Wert in den Drucktisch. Kann bei Objekten "\r
"verwendet werden, welche keine flache Unterseite haben."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Doppelextrusion Überlappung (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"den Düsen bei der Doppelextrusion hinzu. Dies verbindet die beiden "\r
"Druckmaterialien besser miteinander."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Geschwindigkeit"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Leerfahrt Geschwindigkeit (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"Viele Geräte überspringen dabei allerdings Motorschritte und die "\r
"Druckobjekte werden unbrauchbar."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Geschwindigkeit unterste Schicht (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Druckgeschwindigkeit für die erste Schicht. Drucken Sie die erste Schicht "\r
"langsamer, damit sie besser auf dem Drucktisch haftet."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Füllgeschwindigkeit (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"Die Füllung schneller zu drucken, kann die Druckzeit massiv verkürzen, "\r
"beeinträchtigt aber womöglich die Druckqualität."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Geschwindigkeit unterste Schicht (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Geschwindigkeit, mit welcher die Füllung gedruckt wird. Verwenden Sie den "\r
+"Wert 0, um die Füllung mit der allgemeinen Druckgeschwindigkeit zu Drucken. "\r
+"Die Füllung schneller zu drucken, kann die Druckzeit massiv verkürzen, "\r
+"beeinträchtigt aber womöglich die Druckqualität."\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Geschwindigkeit äußere Hülle (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"Zu großer Unterschied zwischen innerer und äußerer Hülle hat einen negativen "\r
"Effekt."\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Geschwindigkeit innere Hülle (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"den Wert 0, um die innere Hülle mit der allgemeinen Druckgeschwindigkeit zu "\r
"Drucken."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Abkühlen"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Minimale Druckzeit pro Schicht (s)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"Geschwindigkeit, damit das Erstellen einer Schicht mindestens so lange "\r
"dauert."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Lüfter einschalten"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Schaltet den Lüfter während des des Drucks ein. Die Kühlung durch den Lüfter "\r
"ist besonders bei schnelleren Drucken notwendig."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Anzahl Linien"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"Ein Wert von 0 deaktiviert den Rock. Mehrere Linien können bei kleinen "\r
"Objekten helfen, den Materialfluss genügend herzustellen."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Start Distanz (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"Dies ist die Minimaldistanz, mehrere Umfahrungslinien werden aussen an diese "\r
"Distanz angehängt."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Minimale Länge (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"diese Minimaldistanz zu erreichen.\n"\r
"Hinweis: Ist die Linienanzahl auf 0 gesetzt, wird dieser Wert ignoriert."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "Lüfter Maximum in Höhe (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"Schicht 0 (Erste Schicht) ist der Lüfter aus, danach wird der Lüfter linear "\r
"schnell bis die eingestellte Schicht erreicht ist"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Lüfter Geschwindigkeit min (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"minimale Geschwindigkeit wird verwendet, wenn die Druckgeschwindigkeit nicht "\r
"verringert wird."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Lüfter Geschwindigkeit max (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"maximale Geschwindigkeit wird verwendet, wenn die Druckgeschwindigkeit durch "\r
"die minimale Druckzeit für eine Schicht um mehr als 200% verringert wird."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Minimale Geschwindigkeit (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"Vorschubrate schützt davor. Auch wenn ein Druck stark verlangsamt wird, wird "\r
"er nie langsamer ausgeführt als diese minimale Geschwindigkeit."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Druckkopf zum Kühlen anheben"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"Hebt den Druckkopf zum Kühlen an, damit die minimale Druckzeit für eine "\r
"Schicht immer erreicht wird."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Füllung"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Oben geschlossen"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"der Fülldichte gedruckt. In Kombination mit 0% Fülldichte hilfreich für "\r
"Schalen und Vasen."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Unten geschlossen"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Erstellt unten eine gefüllte Oberfläche. Wenn deaktiviert, wird von der "\r
"ersten Schicht an mit der Fülldichte gedruckt. Hilfreich für Gebäude."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Füllung Überlappung (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"Menge an Überlappung der Füllung un der Außenwände. Damit die Füllung und "\r
"die Außenwände gut Schließen, wird eine geringe Überlappung benötigt."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "Art des Stützmaterials"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"Linien: einwandige, einzeln zu entfernende Teile. Besser geeignet für "\r
"schwierige Drucke."\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "Überhangwinkel für Stützmaterial (in Grad)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
#, fuzzy\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"0 Grad entspricht horizontal\n"\r
"90 Grad entspricht vertikal"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Fülldichte (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"Stützmaterial, welches dafür leichter zu entfernen ist. 20% scheint ein "\r
"gutes Mittelmaß zu sein."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Distanz X/Y (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"0.7mm ergibt eine gute Distanz vom Druckobjekt, damit das Stützmaterial "\r
"nicht am Druckobjekt klebt."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Distanz Z (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"erzeugt aber einen etwas unschöneren Druck.\n"\r
"0.15mm ergibt eine gute Trennung zwischen Stützmaterial und Druckobjekt."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "Außenhaut als Spirale drucken"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"verwandelt ein solides Objekt in einen einwandigen Druck mit solidem Boden.\n"\r
"In früheren Versionen \"Joris\" genannt"\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr "Nur der Gitternetzoberfläche folgen"\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
"Folgt nur der Gitternetzoberfläche des 3D Models, Keine Füllung, kein Dach/"\r
"Boden, nichts."\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Anzahl Randlinien"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"bedeuten eine grössere Randfläche, die besser haftet, verringert allerdings "\r
"die maximale Druckfläche."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Zusätzlicher Rand (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"Druckobjekt erstellt. Ein größerer Wert ergibt ein stärkeres Gitter, "\r
"benötigt allerdings mehr Material und reduziert die Druckfläche."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Linienabstand (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
"Wenn Sie ein Gitter verwenden, werden die Gitterlinien um diese Distanz "\r
"voneinander entfernt gedruckt."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Basisdicke (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
"Wenn Sie ein Gitter verwenden, wird die erste Schicht des Gitters mit dieser "\r
"Schichtdicke gedruckt."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Breite Basislinien (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
"Wenn Sie ein Gitter verwenden, werden die Linien der ersten Schicht mit "\r
"dieser Breite gedruckt."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Trennschicht Dicke (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
"Wenn Sie ein Gitter verwenden, wird die Trennschicht zwischen Gitter und "\r
"Objekt mit dieser Dicke gedruckt."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Trennschicht Linienbreite (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
"Wenn Sie ein Gitter verwenden, werden die Linien der Trennschicht mit dieser "\r
"Breite gedruckt."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr "Abstand"\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
#, fuzzy\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"0,2mm wirkt wunder bei PLA und sorgt dafür, dass das Gitter einfacher zu "\r
"entfernen ist."\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr "Oberflächen Schichten"\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
"Anzahl an Oberflächen Schichten auf dem Gitter, dies sind solide Schichten "\r
"auf denen das Model gedruckt wird"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Dicke der ersten Schicht (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Trennschicht Linienbreite (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Automatische Reparatur"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Kombiniere alles (Typ-A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"einige der innen liegenden Löcher zu erhalten. Typ-B ignoriert alle innen "\r
"liegenden Löcher und erhält lediglich die Außenform jeder Schicht."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Kombiniere alles (Typ-B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Erhalte offene Flächen"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"Wie bei allen \"Automatischen Reparatur\" Optionen können die Resultate "\r
"variieren, verwenden Sie diese Option also auf eigenes Risiko."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Umfassendes Schließen"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"Wie bei allen Optionen der \"Automatischen Reparatur\" können die Resultate "\r
"unterschiedlich sein, verwenden Sie deshalb diese Option auf eigene Gefahr."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Speichere Profil beim Slicen"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"Speichere beim Slicen das Profil als [stl_datei]_profile.ini ins selbe "\r
"Verzeichnis wie das Modell."\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Kosten (Preis/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
"Preis Ihres Druckmaterials pro Kilogramm. Dient zur Schätzung der "\r
"Materialkosten des Druckobjekts."\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Kosten (Preis/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
"Preis Ihres Druckmaterials pro Meter. Dient zur Schätzung der Materialkosten "\r
"des Druckobjekts."\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Automatische Erkennung SD-Karten Laufwerk"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"da bei einigen Systemen externe Festplatten oder USB-Sticks als SD-Karten "\r
"erkannt werden."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Prüfe auf Aktualisierungen"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr ""\r
"Prüfe beim Starten von Cura automatisch, ob eine neue Version von Cura "\r
"verfügbar ist"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Sende Nutzerstatistiken"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Übermittle anonyme Nutzungs-Informationen, um die nächsten Versionen von "\r
"Cura zu verbessern"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Dichte (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"for ABS. Dieser Wert wird verwendet, um die ungefähre Menge an Druckmaterial "\r
"zu schätzen, welche für das Druckobjekt verwendet wird."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
"Verwendete Sprache umschalten. Zum Übernehmen ist ein Neustart von Cura "\r
"erforderlich."\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Modellfarbe"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "Ansichtsfarbe für Extruder 1"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Modellfarbe (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "Ansichtsfarbe für Extruder 2"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Modellfarbe (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "Ansichtsfarbe für Extruder 3"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Modellfarbe (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "Ansichtsfarbe für Extruder 4"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "Druckfenster Typ"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "Wähle die Oberfläche für USB-Drucken aus"\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Maximale Breite (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Grösse des Geräts in mm"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Maximale Tiefe (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Maximale Höhe (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "Mittelpunkt der Bau Plattform (0, 0)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
"Die Firmware des Druckers definiert die Mitte der Bau Plattform als (0, 0) "\r
"anstelle der vorderen linken Ecke."\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "Druckflächenform"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "Die Form des Druckplattform des Druckers"\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Wenn Ihr Gerät einen beheizten Drucktisch besitzt, aktivieren Sie hier die "\r
"Einstellungen dafür (benötigt Neustart)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "GCode Art"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"MakerBot GCode enthält ein paar Anpassungen. Es wird aber immer noch "\r
"MakerWare benötigt um den GCode in das X3G Format zu übersetzen."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Anzahl Extruder"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Anzahl Extruder des Geräts."\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "Abstand X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "Der Abstand des zweiten Extruders vom ersten Extruder."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Abstand Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "Der Abstand des dritten Extruders vom ersten Extruder."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "Der Abstand des vierten Extruders vom ersten Extruder."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "E-Schritte pro 1mm Druckmaterial"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Anzahl Schritte pro mm Druckmaterial Extrusion. Wird der Wert auf 0 gesetzt, "\r
"wird er ignoriert, und stattdessen der Wert aus der Firmware verwendet."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Serieller Anschluss"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Serieller Anschluss für die Kommunikation mit dem Drucker"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Baudrate"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Muss mit den Firmware-Einstellungen übereinstimmen\n"\r
"Übliche Werte sind 250000, 115200, 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Druckkopf-Größe in X min (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"Teil des Druckkopfs. 75mm beim Ultimaker, wenn der Lüfter auf der linken "\r
"Seite angebracht ist."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Druckkopf-Größe in Y min (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"Teil des Druckkopfs. 18mm beim Ultimaker, wenn der Lüfter auf der linken "\r
"Seite angebracht ist."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Druckkopf-Größe in X max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Druckkopf-Größe in Y max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"Teil des Druckkopfs. 35mm beim Ultimaker, wenn der Lüfter auf der linken "\r
"Seite angebracht ist."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Höhe Druckkopf-Aufhängung (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"sollen größer als dieser Wert, können die Objekte nicht nacheinander "\r
"gedruckt werden. 60mm beim Ultimaker."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr ""\r
"Eine Fließgeschwindigkeit von mehr als 150% ist selten und normalerweise "\r
"nicht empfohlen."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr ""\r
"Eine Fließgeschwindigkeit von weniger als 50% ist selten und normalerweise "\r
"nicht empfohlen."\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"Schicht dicken von mehr als %.2fmm (80%% des Düsen Durchmessers) führen zu "\r
"einer schlechten Druckqualität und werden nicht empfohlen."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
"Es ist sehr unwahrscheinlich das Ihr Drucker eine Geschwindigkeit von mehr "\r
"als 150mm/s erreichen kann."\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
"Temperaturen über 260°C können Ihren Drucker beschädigen! Seien Sie "\r
"vorsichtig!"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"Sind Sie sicher das Ihr Filament so dick ist? Normal sind dicken von 3 oder "\r
"1,75 mm."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
"Es ist sehr unwahrscheinlich das Ihr Drucker eine Geschwindigkeit von mehr "\r
"als 300mm/s erreichen kann."\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr "%0.2f Meter %0.0f Gramm"\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Kopiere Profil in Zwischenablage"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Hohe Qualität"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normale Qualität"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Niedrige Qualität"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Dünnwandige Schale oder Vase"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Durchmesser:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Nur Außen"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Erst-Start Assistent von Cura aufrufen..."\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2013-09-27 09:41+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr ""\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
msgid "Other machine information"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
msgid "Custom RepRap information"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"it is highly recommended to improve reliability."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"and ultimately makes your printer work."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"You will get the chance to do so now."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
msgid "Bed leveling wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
msgid "It will do the following steps"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
msgid "Connect to printer"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr ""\r
\r
msgid "Expert config"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Installed firmware: %s"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
msgid "Failed to connect to programmer.\n"\r
msgstr ""\r
\r
msgid "Print...\tCTRL+P"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr ""\r
\r
msgid "Save Profile..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
msgid "Auto Firmware Update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
msgid "Add new machine..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Do you really want to reset?"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid "Profile copy"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr ""\r
\r
msgid "Error: no plugin selected"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
msgid "Preferences"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
msgid "Add new machine"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
msgid "Remove machine"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr ""\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr ""\r
\r
msgid "Error log"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:912\r
-msgid "Toolpath to SD"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:1206\r
-msgid "Overhang view not working due to lack of OpenGL shaders support."\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
+#: Cura/gui/sceneView.py:866\r
+msgid "Reset all objects positions"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
+#: Cura/gui/sceneView.py:991\r
+msgid "Toolpath to SD"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
+#: Cura/gui/sceneView.py:1285\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr ""\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr ""\r
msgid "Webcam error"\r
msgstr ""\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr ""\r
msgstr ""\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr ""\r
\r
"of perimeter lines and the thickness of those perimeter lines."\r
msgstr ""\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr ""\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr ""\r
"near your wall thickness to make an evenly strong part."\r
msgstr ""\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr ""\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr ""\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr ""\r
\r
msgstr ""\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr ""\r
\r
#: Cura/util/profile.py:189\r
+msgid "5th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"Everywhere creates support even on top of parts of the model."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"(Note that enabling the brim or raft disables the skirt)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"You can also use the 2nd extruder for soluble support materials."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"print the 2nd color."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"This means that with thinner layers, your tower gets bigger."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"number means less extrusion, a smaller number generates more extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+msgid "Diameter5 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:201\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"the filament and causes grinding issues."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"effect on delta towers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"the other layers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"time, but this can negatively affect print quality."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"and the outer shell speed will effect quality in a negative way."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"speed and the infill/printing speed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"seconds printing this layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"priming your extruder better for small objects."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"this distance."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"Note: If the line count is set to 0 this is ignored."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"than 200%."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"slowed down it will never be slower than this minimal speed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"infill."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"being horizontal and 0 degree being vertical."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"weaker support which is easier to remove. 15% seems to be a good average."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"the print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"0.15mm gives a good seperation of the support material."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"This feature used to be called Joris in older versions."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"using more material and leaving less area for your print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Surface layer thickness (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Surface layer line width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"risk."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"risk."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"Mach3 uses A,B,C instead of E for extruders."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Common values are 250000, 115200, 57600"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"Ultimaker."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"are not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2013
-# This file is distributed under the same license as the Cura package.
-# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Cura\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-01-06 03:11-0300\n"
-"PO-Revision-Date: 2015-01-06 16:05-0300\n"
-"Last-Translator: Ernesto Bazzano <bazza@riseup.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.5.4\n"
-
-#: Cura/util/sliceEngine.py:93
-#, python-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: Cura/util/sliceEngine.py:95
-#, python-format
-msgid "%d hour %d minutes"
-msgstr "%d hora %d minutos"
-
-#: Cura/util/sliceEngine.py:96
-#, python-format
-msgid "%d hours %d minutes"
-msgstr "%d hora %d minutos"
-
-#: Cura/util/sliceEngine.py:101
-#, python-format
-msgid "%0.2f meter %0.0f gram"
-msgstr "%0.2f metros %0.0f gramos"
-
-#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210
-#: Cura/util/profile.py:212
-msgid "Quality"
-msgstr "Calidad"
-
-#: Cura/util/profile.py:178
-msgid "Layer height (mm)"
-msgstr "Espesor de la capa (mm)"
-
-#: Cura/util/profile.py:178
-msgid ""
-"Layer height in millimeters.\n"
-"This is the most important setting to determine the quality of your print. "
-"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
-"0.25mm with an Ultimaker for very fast prints at low quality."
-msgstr ""
-"Espeso de capa en milimetros. \n"
-"Este es el ajuste más importante para definir la calidad de impresión. "
-"Impresiones normales usan 0.1 mm, Alta calidad 0,06 mm. Puedes incluso "
-"utilizar 0.25mm para impresiones muy rapidas a baja calidad en la Ultimaker."
-
-#: Cura/util/profile.py:179
-msgid "Shell thickness (mm)"
-msgstr "Espesor de la pared (mm)"
-
-#: Cura/util/profile.py:179
-msgid ""
-"Thickness of the outside shell in the horizontal direction.\n"
-"This is used in combination with the nozzle size to define the number\n"
-"of perimeter lines and the thickness of those perimeter lines."
-msgstr ""
-"Grosor de la pared exterior en la dirección horizontal. \n"
-"Este se utiliza en combinación con el tamaño de la boquilla para definir el "
-"número \n"
-"de líneas perimetrales y el espesor de las líneas del perímetro."
-
-#: Cura/util/profile.py:180 Cura/util/profile.py:201 Cura/util/profile.py:202
-#: Cura/util/profile.py:203 Cura/util/profile.py:204 Cura/util/profile.py:205
-#: Cura/util/profile.py:206 Cura/util/profile.py:207
-msgid "Retraction"
-msgstr "Retracción"
-
-#: Cura/util/profile.py:180
-msgid "Enable retraction"
-msgstr "Habilitar retracción"
-
-#: Cura/util/profile.py:180
-msgid ""
-"Retract the filament when the nozzle is moving over a none-printed area. "
-"Details about the retraction can be configured in the advanced tab."
-msgstr ""
-"Retraer el filamento cuando el nozzle se mueva sobre un area sin impresión. "
-"Detalles de la retracción pueden ser configurados en la pestaña ajustes "
-"avanzados."
-
-#: Cura/util/profile.py:181 Cura/util/profile.py:182
-msgid "Fill"
-msgstr "Relleno"
-
-#: Cura/util/profile.py:181
-msgid "Bottom/Top thickness (mm)"
-msgstr "Espesor superior e inferior"
-
-#: Cura/util/profile.py:181
-msgid ""
-"This controls the thickness of the bottom and top layers, the amount of "
-"solid layers put down is calculated by the layer thickness and this value.\n"
-"Having this value a multiple of the layer thickness makes sense. And keep it "
-"near your wall thickness to make an evenly strong part."
-msgstr ""
-"Controla el espesor de la capa inferior y superior, la cantidad de capas "
-"sólidas se calcula por el espesor de la capa y este valor.\n"
-"Tener un valor múltiplo del espesor de la capa tiene sentido. Y mantenerlo "
-"cerca de su espesor de pared para hacer una pieza uniformemente fuerte."
-
-#: Cura/util/profile.py:182 Cura/util/profile.py:230 Cura/util/profile.py:231
-#: Cura/util/profile.py:232
-msgid "Infill"
-msgstr "Relleno"
-
-#: Cura/util/profile.py:182
-msgid "Fill Density (%)"
-msgstr "Densidad Relleno (%)"
-
-#: Cura/util/profile.py:182
-msgid ""
-"This controls how densely filled the insides of your print will be. For a "
-"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
-"enough.\n"
-"This won't affect the outside of the print and only adjusts how strong the "
-"part becomes."
-msgstr ""
-"Esto controla la densidad de relleno interior de la impresión. Para una "
-"impresión sólida usar 100%, para una vacía 0%. Un valor de alrededor de 20% "
-"es suficiente por lo general.\n"
-"Esto no afectará a la parte exterior de la impresión y sólo afecta a lo "
-"fuerte que la pieza será."
-
-#: Cura/util/profile.py:183 Cura/gui/mainWindow.py:168
-msgid "Machine"
-msgstr "Maquina"
-
-#: Cura/util/profile.py:183 Cura/gui/configWizard.py:396
-msgid "Nozzle size (mm)"
-msgstr "Tamaño boquilla (mm)"
-
-#: Cura/util/profile.py:183
-msgid ""
-"The nozzle size is very important, this is used to calculate the line width "
-"of the infill, and used to calculate the amount of outside wall lines and "
-"thickness for the wall thickness you entered in the print settings."
-msgstr ""
-"El tamaño del noozle es muy importante, se usa para calcular el ancho del "
-"trazado y el relleno, y es usado para calcular la cantidad de lineas "
-"exteriores y su espesor de pared según los datos introducidos."
-
-#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186
-#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189
-msgid "Speed and Temperature"
-msgstr "Velocidad "
-
-#: Cura/util/profile.py:184
-msgid "Print speed (mm/s)"
-msgstr "Velocidad impresión (mm/s)"
-
-#: Cura/util/profile.py:184
-msgid ""
-"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
-"s, but for good quality prints you want to print slower. Printing speed "
-"depends on a lot of factors. So you will be experimenting with optimal "
-"settings for this."
-msgstr ""
-"Velocid a la que imprime Una Ultimaker bien ajustada puede alcanzar 150mm/s "
-"pero para impresiones de calidad es mejor velocidades menores. La velocidad "
-"de impresión depende de muchos factores. Experimenta hasta encontrar tus "
-"ajustes óptimos."
-
-#: Cura/util/profile.py:185
-msgid "Printing temperature (C)"
-msgstr "Temperatura impresión (C)"
-
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
-#: Cura/util/profile.py:188
-msgid ""
-"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
-"For PLA a value of 210C is usually used.\n"
-"For ABS a value of 230C or higher is required."
-msgstr ""
-"Temperaturas usadas para imprimir. Deja a 0 para definirlas.\n"
-"Para PLA un valor a partir 210C es usual\n"
-"Para ABS un valor de 230 o más es requerido."
-
-#: Cura/util/profile.py:186
-msgid "2nd nozzle temperature (C)"
-msgstr "Temperatura 2º nozzle (C)"
-
-#: Cura/util/profile.py:187
-msgid "3th nozzle temperature (C)"
-msgstr "Temperatura 3º nozzle (C)"
-
-#: Cura/util/profile.py:188
-msgid "4th nozzle temperature (C)"
-msgstr "Temperatura 4º nozzle (C)"
-
-#: Cura/util/profile.py:189
-msgid "Bed temperature (C)"
-msgstr "Temperatura de la cama (C)"
-
-#: Cura/util/profile.py:189
-msgid ""
-"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
-msgstr ""
-"Temperatura usada para calentar la cama. Pon 0 para calentar tu mismo. "
-
-#: Cura/util/profile.py:190 Cura/util/profile.py:191
-msgid "None"
-msgstr "Nada"
-
-#: Cura/util/profile.py:190
-msgid "Touching buildplate"
-msgstr "Tocando la cama caliente"
-
-#: Cura/util/profile.py:190
-msgid "Everywhere"
-msgstr "Cualquier sitio"
-
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192
-#: Cura/util/profile.py:233 Cura/util/profile.py:234 Cura/util/profile.py:235
-#: Cura/util/profile.py:236 Cura/util/profile.py:237
-msgid "Support"
-msgstr "Soportes"
-
-#: Cura/util/profile.py:190
-msgid "Support type"
-msgstr "Tipo de soporte"
-
-#: Cura/util/profile.py:190
-msgid ""
-"Type of support structure build.\n"
-"\"Touching buildplate\" is the most commonly used support setting.\n"
-"\n"
-"None does not do any support.\n"
-"Touching buildplate only creates support where the support structure will "
-"touch the build platform.\n"
-"Everywhere creates support even on top of parts of the model."
-msgstr ""
-"Tipo de estructura de soporte. \n"
-"\"Tocar plataforma\" es el ajuste de soporte más utilizado.\n"
-"\n"
-"Nada no hace ningún tipo de soporte. \n"
-"Tocar plataforma creara apoyos en la estructura hasta tocar la "
-"plataforma. \n"
-"Cualquier sitio creara soportes incluso sobre la pieza"
-
-#: Cura/util/profile.py:191 Cura/util/profile.py:241
-msgid "Brim"
-msgstr "Borde (Brim)"
-
-#: Cura/util/profile.py:191 Cura/util/profile.py:242 Cura/util/profile.py:243
-#: Cura/util/profile.py:244 Cura/util/profile.py:245 Cura/util/profile.py:246
-#: Cura/util/profile.py:247 Cura/util/profile.py:248 Cura/util/profile.py:249
-#: Cura/util/profile.py:250 Cura/util/profile.py:251 Cura/util/profile.py:252
-msgid "Raft"
-msgstr "Borrador (Raft)"
-
-#: Cura/util/profile.py:191 Cura/util/profile.py:222 Cura/util/profile.py:223
-#: Cura/util/profile.py:224
-msgid "Skirt"
-msgstr "Falda"
-
-#: Cura/util/profile.py:191
-msgid "Platform adhesion type"
-msgstr "Tipo de adhesion en la cama"
-
-#: Cura/util/profile.py:191
-msgid ""
-"Different options that help in preventing corners from lifting due to "
-"warping.\n"
-"Brim adds a single layer thick flat area around your object which is easy to "
-"cut off afterwards, and it is the recommended option.\n"
-"Raft adds a thick raster below the object and a thin interface between this "
-"and your object.\n"
-"(Note that enabling the brim or raft disables the skirt)"
-msgstr ""
-"Diferentes opciones que ayudan en la prevención de las esquinas de elevación "
-"debido a la deformación. \n"
-"Falda (Brim) añade una capa de grosor plana alrededor de su objeto, que es "
-"fácil de cortar después, y la opción recomendada. \n"
-"Borrador (Raft) agrega una trama gruesa por debajo del objeto y una interfaz "
-"fina entre esto y su objeto. \n"
-"(Tenga en cuenta que la activación de Raft o Brim desactiva el borde-skirt)"
-
-#: Cura/util/profile.py:192
-msgid "Both"
-msgstr "Ambos"
-
-#: Cura/util/profile.py:192
-msgid "First extruder"
-msgstr "Primer extrusor"
-
-#: Cura/util/profile.py:192
-msgid "Second extruder"
-msgstr "Segundo extrusor"
-
-#: Cura/util/profile.py:192
-msgid "Support dual extrusion"
-msgstr "Soporte extrusión dual"
-
-#: Cura/util/profile.py:192
-msgid ""
-"Which extruder to use for support material, for break-away support you can "
-"use both extruders.\n"
-"But if one of the materials is more expensive then the other you could "
-"select an extruder to use for support material. This causes more extruder "
-"switches.\n"
-"You can also use the 2nd extruder for soluble support materials."
-msgstr ""
-"Cual extrusor se usa para el material de soporte, para soporte de apoyo, se "
-"pueden usar los dos extrusores. \n"
-"Sin embargo, si uno de los materiales es más caro que el otro podría "
-"seleccionar un extrusor para el material de soporte. Esto hace más cambios "
-"de extrusor. \n"
-"También puede utilizar la segunda extrusora para materiales de soporte "
-"solubles."
-
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
-msgid "Dual extrusion"
-msgstr "Extrusion doble"
-
-#: Cura/util/profile.py:193
-msgid "Wipe&prime tower"
-msgstr "Limpie y la pila principal"
-
-#: Cura/util/profile.py:193
-msgid ""
-"The wipe-tower is a tower printed on every layer when switching between "
-"nozzles.\n"
-"The old nozzle is wiped off on the tower before the new nozzle is used to "
-"print the 2nd color."
-msgstr ""
-"La torre de limpieza es una torre impresa que en cada capa cuando se cambia "
-"entre las boquillas.\n"
-"La vieja boquilla se limpia en la torre antes de que la nueva boquilla se "
-"utiliza para imprimir el segundo color."
-
-#: Cura/util/profile.py:194
-msgid "Wipe&prime tower volume per layer (mm3)"
-msgstr "Limpie y volumen de la pila principal por capa (mm3)"
-
-#: Cura/util/profile.py:194
-msgid ""
-"The amount of material put in the wipe/prime tower.\n"
-"This is done in volume because in general you want to extrude a\n"
-"certain amount of volume to get the extruder going, independent on the layer "
-"height.\n"
-"This means that with thinner layers, your tower gets bigger."
-msgstr ""
-"La cantidad de material puesto en el pila de limpieza.\n"
-"Esto se hace en el volumen porque, en general desea extruir una\n"
-"cierta cantidad de volumen para obtener la extrusora va , independientemente "
-"de la altura de la capa.\n"
-"Esto significa que con capas más delgadas, la pila se hace más grande."
-
-#: Cura/util/profile.py:195
-msgid "Ooze shield"
-msgstr "El escudo exudado"
-
-#: Cura/util/profile.py:195
-msgid ""
-"The ooze shield is a 1 line thick shell around the object which stands a few "
-"mm from the object.\n"
-"This shield catches any oozing from the unused nozzle in dual-extrusion."
-msgstr ""
-"El escudo exudado es una gruesa cáscara de 1 línea alrededor del objeto que "
-"se encuentra unos pocos mm desde el objeto .\n"
-"Este escudo atrapa cualquier supuración de la boquilla sin utilizar en doble "
-"extrusión."
-
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
-#: Cura/util/profile.py:199 Cura/util/profile.py:200
-msgid "Filament"
-msgstr "Filamento"
-
-#: Cura/util/profile.py:196
-msgid "Diameter (mm)"
-msgstr "Diámetro (mm)"
-
-#: Cura/util/profile.py:196
-msgid ""
-"Diameter of your filament, as accurately as possible.\n"
-"If you cannot measure this value you will have to calibrate it, a higher "
-"number means less extrusion, a smaller number generates more extrusion."
-msgstr ""
-"Diámetro del filamento, con la mayor precisión posible.\n"
-"Si no se puede medir este valor tendrá que calibrarlo, más alto significa "
-"menos extrusión, más pequeño genera más extrusión."
-
-#: Cura/util/profile.py:197
-msgid "Diameter2 (mm)"
-msgstr "Diámetro 2(mm)"
-
-#: Cura/util/profile.py:197
-msgid ""
-"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"Diámetro de tu filamento para el 2º extrusor. Usa 0 para usar el mismo "
-"diámetro que para el 1."
-
-#: Cura/util/profile.py:198
-msgid "Diameter3 (mm)"
-msgstr "Diametro 3(mm)"
-
-#: Cura/util/profile.py:198
-msgid ""
-"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"Diametro de tu filamento para el 3º extrusor. Usa 0 para usar el mismo "
-"diametro que para el 1."
-
-#: Cura/util/profile.py:199
-msgid "Diameter4 (mm)"
-msgstr "Diametro 4(mm)"
-
-#: Cura/util/profile.py:199
-msgid ""
-"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"Diametro de tu filamento para el 4º extrusor. Usa 0 para usar el mismo "
-"diametro que para el 1."
-
-#: Cura/util/profile.py:200
-msgid "Flow (%)"
-msgstr "Flujo (%)"
-
-#: Cura/util/profile.py:200
-msgid ""
-"Flow compensation, the amount of material extruded is multiplied by this "
-"value"
-msgstr ""
-"Compensación de flujo, la cantidad de material extruida se multiplicará por "
-"este valor"
-
-#: Cura/util/profile.py:201
-msgid "Speed (mm/s)"
-msgstr "Velocidad (mm/s)"
-
-#: Cura/util/profile.py:201
-msgid ""
-"Speed at which the filament is retracted, a higher retraction speed works "
-"better. But a very high retraction speed can lead to filament grinding."
-msgstr ""
-"Velocidad a la que el filamento es retraido, a mayor velocidad mejor "
-"funcionamiento. Velocidades muy alta puedes comerse el filamento."
-
-#: Cura/util/profile.py:202
-msgid "Distance (mm)"
-msgstr "Distancia (mm)"
-
-#: Cura/util/profile.py:202
-msgid ""
-"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
-"seems to generate good results."
-msgstr ""
-"Cantidad de retracción, fijar a 0 para no retraer. Un valor de 4.5mm parece "
-"ofrecer buenos resultados."
-
-#: Cura/util/profile.py:203
-msgid "Dual extrusion switch amount (mm)"
-msgstr "Extrusión dual cantidad de cambio (mm)"
-
-#: Cura/util/profile.py:203
-msgid ""
-"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
-"no retraction at all. A value of 16.0mm seems to generate good results."
-msgstr ""
-"Cantidd de retracción cuando cambiar nozzle con extrusión dual, fijar a 0 "
-"para no retraer. Un valor de 16 mm parece ofrecer buenos resultados."
-
-#: Cura/util/profile.py:204
-msgid "Minimum travel (mm)"
-msgstr "Viaje mínimo (mm)"
-
-#: Cura/util/profile.py:204
-msgid ""
-"Minimum amount of travel needed for a retraction to happen at all. To make "
-"sure you do not get a lot of retractions in a small area."
-msgstr ""
-"Minima distancia de desplazamiento necesaria para retraer. Para asegurar que "
-"no retrae en pequeñas areas"
-
-#: Cura/util/profile.py:205
-msgid "Enable combing"
-msgstr "Habilitar peinado (combing)"
-
-#: Cura/util/profile.py:205
-msgid ""
-"Combing is the act of avoiding holes in the print for the head to travel "
-"over. If combing is disabled the printer head moves straight from the start "
-"point to the end point and it will always retract."
-msgstr ""
-"Peinado (combing) es el acto de evitar los agujeros en la impresión. Si esta "
-"desactiva el cabezal de impresión se desplaza directamente desde el punto de "
-"inicio hasta el punto final y siempre se retrae."
-
-#: Cura/util/profile.py:206
-msgid "Minimal extrusion before retracting (mm)"
-msgstr "Mínima extrusión para retraer (mm)"
-
-#: Cura/util/profile.py:206
-msgid ""
-"The minimal amount of extrusion that needs to be done before retracting "
-"again if a retraction needs to happen before this minimal is reached the "
-"retraction is ignored.\n"
-"This avoids retracting a lot on the same piece of filament which flattens "
-"the filament and causes grinding issues."
-msgstr ""
-"La cantidad mínima de extrusión que hay que hacer antes de retraer de nuevo "
-"si una retracción tiene que ocurrir antes de que este mínimo se alcanza la "
-"retracción se ignora.\n"
-"Esto evita la retracción mucho en la misma pieza de filamento que se aplana "
-"el filamento y provoca problemas de molienda."
-
-#: Cura/util/profile.py:207
-msgid "Z hop when retracting (mm)"
-msgstr "Mínima extrusión para retraer (mm)"
-
-#: Cura/util/profile.py:207
-msgid ""
-"When a retraction is done, the head is lifted by this amount to travel over "
-"the print. A value of 0.075 works well. This feature has a lot of positive "
-"effect on delta towers."
-msgstr ""
-"Cuando se realiza una retractación, la cabeza es levantada por esta cantidad "
-"para viajar por la impresión. Un valor de 0,075 funciona bien. Esta "
-"característica tiene una gran cantidad de efecto positivo en torres delta."
-
-#: Cura/util/profile.py:208
-msgid "Initial layer thickness (mm)"
-msgstr "Espesor capa inicial (mm)"
-
-#: Cura/util/profile.py:208
-msgid ""
-"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
-"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
-"the other layers."
-msgstr ""
-"Espesor de capa inferior. Un capa inferior mas gruesa ayuda a adherir la "
-"impresión mejor. Un valor de 0.0 hara que la capa tenga el mismo espesor que "
-"las demás."
-
-#: Cura/util/profile.py:209
-msgid "Initial layer line width (%)"
-msgstr "Ancho de linea de la capa (mm)"
-
-#: Cura/util/profile.py:209
-msgid ""
-"Extra width factor for the extrusion on the first layer, on some printers "
-"it's good to have wider extrusion on the first layer to get better bed "
-"adhesion."
-msgstr ""
-"Factor de espesor extra para la extrusión en la primera capa, en algunas "
-"impresoras es bueno tener más ancho de extrusión en la primera capa para "
-"obtener una mejor adherencia cama."
-
-#: Cura/util/profile.py:210
-msgid "Cut off object bottom (mm)"
-msgstr "Cortar fondo del objeto (mm)"
-
-#: Cura/util/profile.py:210
-msgid ""
-"Sinks the object into the platform, this can be used for objects that do not "
-"have a flat bottom and thus create a too small first layer."
-msgstr ""
-"Hunde el objeto en la plataforma, esto puede ser utilizado para objetos que "
-"no tienen un fondo plano y por lo tanto crean una primera capa demasiado "
-"pequeño."
-
-#: Cura/util/profile.py:212
-msgid "Dual extrusion overlap (mm)"
-msgstr "Superposición de la extrusión dual"
-
-#: Cura/util/profile.py:212
-msgid ""
-"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
-"bonds the different colors together."
-msgstr ""
-"Añadir cierta cantidad de superposición en las extrusiones doble. Esto "
-"mezcla mejor diferentes colores."
-
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
-#: Cura/util/profile.py:216 Cura/util/profile.py:217 Cura/util/profile.py:218
-msgid "Speed"
-msgstr "Velocidad"
-
-#: Cura/util/profile.py:213
-msgid "Travel speed (mm/s)"
-msgstr "Velocidad desplazamientos (mm/s)"
-
-#: Cura/util/profile.py:213
-msgid ""
-"Speed at which travel moves are done, a well built Ultimaker can reach "
-"speeds of 250mm/s. But some machines might miss steps then."
-msgstr ""
-"Velocidad a la que se realizan viajes movimientos, un Ultimaker bien "
-"construido puede alcanzar velocidades de 250 mm/s . Pero algunas máquinas "
-"podrían perderse los pasos a continuación ."
-
-#: Cura/util/profile.py:214
-msgid "Bottom layer speed (mm/s)"
-msgstr "Velociad capa inferior (mm/s)"
-
-#: Cura/util/profile.py:214
-msgid ""
-"Print speed for the bottom layer, you want to print the first layer slower "
-"so it sticks better to the printer bed."
-msgstr ""
-"Velocidad de impresión para la capa inferior, esta capa debe imprimirse mas "
-"lenta para mejor la adhesión."
-
-#: Cura/util/profile.py:215
-msgid "Infill speed (mm/s)"
-msgstr "Velocidad relleno (mm/s)"
-
-#: Cura/util/profile.py:215
-msgid ""
-"Speed at which infill parts are printed. If set to 0 then the print speed is "
-"used for the infill. Printing the infill faster can greatly reduce printing "
-"time, but this can negatively affect print quality."
-msgstr ""
-"Velocidad a la que se imprimen las piezas de relleno. Si se establece en 0, "
-"entonces la velocidad de impresión se utiliza para el relleno. Imprimir el "
-"relleno más rápido puede reducir considerablemente el tiempo de impresión, "
-"pero esto puede afectar negativamente a la calidad de impresión."
-
-#: Cura/util/profile.py:216
-msgid "Top/bottom speed (mm/s)"
-msgstr "Velocidad capa superior e inferior (mm/s)"
-
-#: Cura/util/profile.py:216
-msgid ""
-"Speed at which top/bottom parts are printed. If set to 0 then the print "
-"speed is used for the infill. Printing the top/bottom faster can greatly "
-"reduce printing time, but this can negatively affect print quality."
-msgstr ""
-"Velocidad a la que arriba/partes inferiores se imprimen. Si se establece en "
-"0, entonces la velocidad de impresión se utiliza para el relleno. Impresión "
-"de la parte superior/inferior más rápido puede reducir considerablemente el "
-"tiempo de impresión, pero esto puede afectar negativamente a la calidad de "
-"impresión."
-
-#: Cura/util/profile.py:217
-msgid "Outer shell speed (mm/s)"
-msgstr "Velocidad del borde externa (mm/s)"
-
-#: Cura/util/profile.py:217
-msgid ""
-"Speed at which outer shell is printed. If set to 0 then the print speed is "
-"used. Printing the outer shell at a lower speed improves the final skin "
-"quality. However, having a large difference between the inner shell speed "
-"and the outer shell speed will effect quality in a negative way."
-msgstr ""
-"Velocidad a la que se imprime cáscara externa. Si se establece en 0, "
-"entonces se utiliza la velocidad de impresión. Impresión de la capa exterior "
-"a una velocidad inferior mejora la calidad final de la piel. Sin embargo, "
-"tener una gran diferencia entre la velocidad de la cáscara interior y la "
-"cáscara exterior velocidad afectará a la calidad de una manera negativa."
-
-#: Cura/util/profile.py:218
-msgid "Inner shell speed (mm/s)"
-msgstr "Velocidad relleno interno (mm/s)"
-
-#: Cura/util/profile.py:218
-msgid ""
-"Speed at which inner shells are printed. If set to 0 then the print speed is "
-"used. Printing the inner shell faster then the outer shell will reduce "
-"printing time. It is good to set this somewhere in between the outer shell "
-"speed and the infill/printing speed."
-msgstr ""
-"Velocidad a la que son impresos los rellenos. Si dejas 0 se usara la "
-"velocidad de impresión. Imprimir los rellenos más rápido puede reducir mucho "
-"el tiempo de impresión, pero puede puede afectar negativamente la calidad."
-
-#: Cura/util/profile.py:219 Cura/util/profile.py:220 Cura/util/profile.py:225
-#: Cura/util/profile.py:226 Cura/util/profile.py:227 Cura/util/profile.py:228
-#: Cura/util/profile.py:229
-msgid "Cool"
-msgstr "Ventilación"
-
-#: Cura/util/profile.py:219
-msgid "Minimal layer time (sec)"
-msgstr "Minimo tiempo por capa (seg)"
-
-#: Cura/util/profile.py:219
-msgid ""
-"Minimum time spent in a layer, gives the layer time to cool down before the "
-"next layer is put on top. If the layer will be placed down too fast the "
-"printer will slow down to make sure it has spent at least this amount of "
-"seconds printing this layer."
-msgstr ""
-"Tiempo mínimo de permanencia en una capa, le da al tiempo de capa para que "
-"se enfríe antes de poner la siguiente capa en la parte superior. Si la capa "
-"se colocará abajo demasiado rápido la impresora se ralentizará para "
-"asegurarse de que ha pasado por lo menos esta cantidad de segundos la "
-"impresión de esta capa."
-
-#: Cura/util/profile.py:220
-msgid "Enable cooling fan"
-msgstr "Habilitar ventilación"
-
-#: Cura/util/profile.py:220
-msgid ""
-"Enable the cooling fan during the print. The extra cooling from the cooling "
-"fan is essential during faster prints."
-msgstr ""
-"Activa la ventilación durante la impresión. La ventilación extra es esencial "
-"en las impresiones rápidas."
-
-#: Cura/util/profile.py:222
-msgid "Line count"
-msgstr "Numero lineas"
-
-#: Cura/util/profile.py:222
-msgid ""
-"The skirt is a line drawn around the object at the first layer. This helps "
-"to prime your extruder, and to see if the object fits on your platform.\n"
-"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
-"priming your extruder better for small objects."
-msgstr ""
-"El Borde es una linea alrededor del objeto en la primera capa. Esto ayuda a "
-"limpiar el extrusor y ver si caben los objetos en la plataforma.\n"
-"Un valor de 0 desactiva el Borde. Multiples lineas ayudan a cebar el "
-"extrusor para objetos pequeños."
-
-#: Cura/util/profile.py:223
-msgid "Start distance (mm)"
-msgstr "Distancia de inicio (mm)"
-
-#: Cura/util/profile.py:223
-msgid ""
-"The distance between the skirt and the first layer.\n"
-"This is the minimal distance, multiple skirt lines will be put outwards from "
-"this distance."
-msgstr ""
-"La distancia entre el borde y la primera capa.\n"
-"Esta es la mínima distancia, multiples bordes se pondrán hacia afuera."
-
-#: Cura/util/profile.py:224
-msgid "Minimal length (mm)"
-msgstr "Minima longitud (mm)"
-
-#: Cura/util/profile.py:224
-msgid ""
-"The minimal length of the skirt, if this minimal length is not reached it "
-"will add more skirt lines to reach this minimal lenght.\n"
-"Note: If the line count is set to 0 this is ignored."
-msgstr ""
-"La longitud mínima de la falda (skirt), si no se alcanza esta longitud "
-"mínima, añadirá más líneas a la falda (skirt) para llegar a esta longitud "
-"mínima.\n"
-"Nota: Si el número de línea se establece en 0 esto se ignora."
-
-#: Cura/util/profile.py:225
-msgid "Fan full on at height (mm)"
-msgstr "Ventidador desde la altura (mm)"
-
-#: Cura/util/profile.py:225
-msgid ""
-"The height at which the fan is turned on completely. For the layers below "
-"this the fan speed is scaled linearly with the fan off at layer 0."
-msgstr ""
-"La altura a la que el ventilador se enciende completamente. Para las capas "
-"por debajo de esta la velocidad del ventilador se escala linealmente con el "
-"ventilador en la capa 0."
-
-#: Cura/util/profile.py:226
-msgid "Fan speed min (%)"
-msgstr "Velocidad ventilador min (%)"
-
-#: Cura/util/profile.py:226
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Minimal fan speed is used if the layer is not slowed down due to cooling."
-msgstr ""
-"Cuando el ventilador esta activado, funciona a esta velocidad. Si la "
-"ventilación reduce la velocidad de la capa, el ventilador se ajustará en las "
-"velocidades max y min. La velocidad minima será usada si no se reduce la "
-"velocidad debido al la ventilación."
-
-#: Cura/util/profile.py:227
-msgid "Fan speed max (%)"
-msgstr "Velocidad ventilador max (%)"
-
-#: Cura/util/profile.py:227
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Maximal fan speed is used if the layer is slowed down due to cooling by more "
-"than 200%."
-msgstr ""
-"Cuando el ventilador está encendido, se habilita en este nivel de velocidad. "
-"Si la ventialción ralentiza la capa, se ajusta entre el min y la velocidad "
-"máxima. Máxima velocidad del ventilador se utiliza si la capa se hace más "
-"lenta debido al enfriamiento por más de 200%."
-
-#: Cura/util/profile.py:228
-msgid "Minimum speed (mm/s)"
-msgstr "Minima velocidad (mm/s)"
-
-#: Cura/util/profile.py:228
-msgid ""
-"The minimal layer time can cause the print to slow down so much it starts to "
-"ooze. The minimal feedrate protects against this. Even if a print gets "
-"slowed down it will never be slower than this minimal speed."
-msgstr ""
-"El tiempo mínimo por capa puede hacer que la impresión se ralentice tanto "
-"que empieza a exudar. El avance mínimo protege contra esto. Incluso si una "
-"impresión se ralentiza nunca será más lenta que la velocidad mínima."
-
-#: Cura/util/profile.py:229
-msgid "Cool head lift"
-msgstr "Cool head lift"
-
-#: Cura/util/profile.py:229
-msgid ""
-"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
-"the extra time so the minimal layer time is always hit."
-msgstr ""
-"Levante la cabeza si la velocidad mínima es alcanzada por la desaceleración "
-"de la ventilación, y esperar el tiempo extra para que el tiempo mínimo por "
-"capa siempre se alcance."
-
-#: Cura/util/profile.py:230
-msgid "Solid infill top"
-msgstr "Relleno solido superior"
-
-#: Cura/util/profile.py:230
-msgid ""
-"Create a solid top surface, if set to false the top is filled with the fill "
-"percentage. Useful for cups/vases."
-msgstr ""
-"Crea una superficie superior solidad, si esta desactivado se rellena con el "
-"porcentaje de rellon. Util para vaso y tazas."
-
-#: Cura/util/profile.py:231
-msgid "Solid infill bottom"
-msgstr "Relleno solido inferior"
-
-#: Cura/util/profile.py:231
-msgid ""
-"Create a solid bottom surface, if set to false the bottom is filled with the "
-"fill percentage. Useful for buildings."
-msgstr ""
-"Crea una superficie solida inferior, si se desactiva la capa inferior se "
-"realiza con el porc. del relleno. Útil para edificios."
-
-#: Cura/util/profile.py:232
-msgid "Infill overlap (%)"
-msgstr "Superposición relleno (%)"
-
-#: Cura/util/profile.py:232
-msgid ""
-"Amount of overlap between the infill and the walls. There is a slight "
-"overlap with the walls and the infill so the walls connect firmly to the "
-"infill."
-msgstr ""
-"Cantidad de superposicion entre el relleno y las paredes. Un ligera "
-"superposición entre paredes y relleno conecta firmemente ambas."
-
-#: Cura/util/profile.py:233
-msgid "Structure type"
-msgstr "Tipo de soporte"
-
-#: Cura/util/profile.py:233
-msgid ""
-"The type of support structure.\n"
-"Grid is very strong and can come off in 1 piece, however, sometimes it is "
-"too strong.\n"
-"Lines are single walled lines that break off one at a time. Which is more "
-"work to remove, but as it is less strong it does work better on tricky "
-"prints."
-msgstr ""
-"El tipo de estructura de soporte.\n"
-"Grilla es muy fuerte y puede salir en 1 pieza, sin embargo, a veces es "
-"demasiado fuerte.\n"
-"Las líneas son líneas de pared única que se desprenden de una en una. ¿Qué "
-"es más trabajo para eliminar, pero ya que es menos fuerte que funcionara "
-"mejor en impresiones difíciles."
-
-#: Cura/util/profile.py:234
-msgid "Overhang angle for support (deg)"
-msgstr "Ángulo saliente de apoyo (grados)"
-
-#: Cura/util/profile.py:234
-msgid ""
-"The minimal angle that overhangs need to have to get support. With 90 degree "
-"being horizontal and 0 degree being vertical."
-msgstr ""
-"El ángulo mínimo que voladizos hay que tener para obtener apoyo. Con 90 "
-"grados de ser horizontal y 0 grados verticales."
-
-#: Cura/util/profile.py:235
-msgid "Fill amount (%)"
-msgstr "Cantidad de relleno (%)"
-
-#: Cura/util/profile.py:235
-#, python-format
-msgid ""
-"Amount of infill structure in the support material, less material gives "
-"weaker support which is easier to remove. 15% seems to be a good average."
-msgstr ""
-
-#: Cura/util/profile.py:236
-msgid "Distance X/Y (mm)"
-msgstr "Distancia X/Y (mm)"
-
-#: Cura/util/profile.py:236
-msgid ""
-"Distance of the support material from the print, in the X/Y directions.\n"
-"0.7mm gives a nice distance from the print so the support does not stick to "
-"the print."
-msgstr ""
-"Distancia del material de soporte a la impresión, en las direcciones X/Y.\n"
-"0.7mm da buen resultado y el soporte no se pega a la impresión."
-
-#: Cura/util/profile.py:237
-msgid "Distance Z (mm)"
-msgstr "Distancia Z (mm)"
-
-#: Cura/util/profile.py:237
-msgid ""
-"Distance from the top/bottom of the support to the print. A small gap here "
-"makes it easier to remove the support but makes the print a bit uglier.\n"
-"0.15mm gives a good seperation of the support material."
-msgstr ""
-"Distancia desde la parte superior/inferior del soporte a la impresión. Un "
-"pequeño espacio aquí hace que sea más fácil de quitar el apoyo, pero hace "
-"que la impresión mas fea.\n"
-"0,15 mm da una buena separación del material de soporte."
-
-#: Cura/util/profile.py:238 Cura/util/profile.py:239
-msgid "Black Magic"
-msgstr "Magia negra"
-
-#: Cura/util/profile.py:238
-msgid "Spiralize the outer contour"
-msgstr "Espiralizar el contorno exterior"
-
-#: Cura/util/profile.py:238
-msgid ""
-"Spiralize is smoothing out the Z move of the outer edge. This will create a "
-"steady Z increase over the whole print. This feature turns a solid object "
-"into a single walled print with a solid bottom.\n"
-"This feature used to be called Joris in older versions."
-msgstr ""
-"Espiralizar está allanando el movimiento Z del borde exterior . Esto creará "
-"un incremento Z constante durante toda la impresión. Esta característica "
-"convierte a un objeto sólido en una impresión de una sola pared con un fondo "
-"sólido.\n"
-"Esta característica se llamaba Joris en versiones anteriores."
-
-#: Cura/util/profile.py:239
-msgid "Only follow mesh surface"
-msgstr "Sólo seguir superficie de malla"
-
-#: Cura/util/profile.py:239
-msgid ""
-"Only follow the mesh surfaces of the 3D model, do not do anything else. No "
-"infill, no top/bottom, nothing."
-msgstr ""
-"Sólo siga las superficies de malla del modelo 3D, no hacer nada más. Sin "
-"relleno, no superior e inferior, ni nada."
-
-#: Cura/util/profile.py:241
-msgid "Brim line amount"
-msgstr "Cantidad de bordes"
-
-#: Cura/util/profile.py:241
-msgid ""
-"The amount of lines used for a brim, more lines means a larger brim which "
-"sticks better, but this also makes your effective print area smaller."
-msgstr ""
-"La cantidad de lineas usada por Brim, mas lineas significa mayor Brim y "
-"mejor adhesión, pero hace tu área efectiva de impresión menor."
-
-#: Cura/util/profile.py:242
-msgid "Extra margin (mm)"
-msgstr "Margen extra (mm)"
-
-#: Cura/util/profile.py:242
-msgid ""
-"If the raft is enabled, this is the extra raft area around the object which "
-"is also rafted. Increasing this margin will create a stronger raft while "
-"using more material and leaving less area for your print."
-msgstr ""
-"Si la borrador (raft) está activada, esta es la zona de borrador adicional "
-"alrededor del objeto que también esta bocetado. El aumento de este margen "
-"creará un sostén más fuerte durante el uso de más material y dejando menos "
-"espacio para su impresión."
-
-#: Cura/util/profile.py:243
-msgid "Line spacing (mm)"
-msgstr "Espacio entre lineas (mm)"
-
-#: Cura/util/profile.py:243
-msgid ""
-"When you are using the raft this is the distance between the centerlines of "
-"the raft line."
-msgstr ""
-"Cuando se utiliza la balsa es la distancia entre las líneas centrales del "
-"relleno de balsa."
-
-#: Cura/util/profile.py:244
-msgid "Base thickness (mm)"
-msgstr "Grosor de la base (mm)"
-
-#: Cura/util/profile.py:244
-msgid ""
-"When you are using the raft this is the thickness of the base layer which is "
-"put down."
-msgstr ""
-"Cuando se utiliza la balsa es el espesor de la capa de balsa que es puesta "
-"abajo."
-
-#: Cura/util/profile.py:245
-msgid "Base line width (mm)"
-msgstr "Ancho de la linea base (mm)"
-
-#: Cura/util/profile.py:245
-msgid ""
-"When you are using the raft this is the width of the base layer lines which "
-"are put down."
-msgstr ""
-"Cuando se utiliza la balsa es el ancho de la capa de balsa que es puesta "
-"abajo."
-
-#: Cura/util/profile.py:246
-msgid "Interface thickness (mm)"
-msgstr "Espesor interfaz (mm)"
-
-#: Cura/util/profile.py:246
-msgid ""
-"When you are using the raft this is the thickness of the interface layer "
-"which is put down."
-msgstr ""
-"Cuando estás usando raft-balsa est es el espesor de la linea de interfaz que "
-"será depositada"
-
-#: Cura/util/profile.py:247
-msgid "Interface line width (mm)"
-msgstr "Ancho de linea de la interfaz (mm)"
-
-#: Cura/util/profile.py:247
-msgid ""
-"When you are using the raft this is the width of the interface layer lines "
-"which are put down."
-msgstr ""
-"Cuando estás usando raft-balsa est es el ancho de la linea de interfaz que "
-"será depositada"
-
-#: Cura/util/profile.py:248
-msgid "Airgap"
-msgstr "Capa liviana"
-
-#: Cura/util/profile.py:248
-msgid "Gap between the last layer of the raft the whole print."
-msgstr "Brecha entre la última capa de boceto (raft) que toda la impresión."
-
-#: Cura/util/profile.py:249
-msgid "First Layer Airgap"
-msgstr "Primero capa liviana"
-
-#: Cura/util/profile.py:249
-msgid ""
-"Gap between the last layer of the raft and the first printing layer. A small "
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "
-"value is added on top of the 'Airgap' setting."
-msgstr ""
-"Brecha entre la última capa de el borrador (raft) y la primera capa de "
-"impresión. Un pequeño espacio de 0,2mm hace maravillas en PLA y hace que el "
-"borrador (raft) fácil de quitar. Este valor se añade encima del parámetro de "
-"\"dispersión superficial\"."
-
-#: Cura/util/profile.py:250
-msgid "Surface layers"
-msgstr "Capa de superficie"
-
-#: Cura/util/profile.py:250
-msgid ""
-"Amount of surface layers put on top of the raft, these are fully filled "
-"layers on which the model is printed."
-msgstr ""
-"Importe de las capas superficiales, situadas una encima del boceto (raft), "
-"estos son totalmente capas llenas en la que se imprime el modelo."
-
-#: Cura/util/profile.py:251
-msgid "Surface layer thickness (mm)"
-msgstr "Espesor de la capa de superficie (mm)"
-
-#: Cura/util/profile.py:251
-msgid "Thickness of each surface layer."
-msgstr "Espesor de cada capa de la superficie."
-
-#: Cura/util/profile.py:252
-msgid "Surface layer line width (mm)"
-msgstr "Ancho de la capa de superficie (mm)"
-
-#: Cura/util/profile.py:252
-msgid "Width of the lines for each surface layer."
-msgstr "Espesor de las líneas para cada capa de la superficie."
-
-#: Cura/util/profile.py:253 Cura/util/profile.py:254 Cura/util/profile.py:255
-#: Cura/util/profile.py:256
-msgid "Fix horrible"
-msgstr "Corregir horrible"
-
-#: Cura/util/profile.py:253
-msgid "Combine everything (Type-A)"
-msgstr "Combinar todo (Tipo-A)"
-
-#: Cura/util/profile.py:253 Cura/util/profile.py:254
-msgid ""
-"This expert option adds all parts of the model together. The result is "
-"usually that internal cavities disappear. Depending on the model this can be "
-"intended or not. Enabling this option is at your own risk. Type-A is "
-"dependent on the model normals and tries to keep some internal holes intact. "
-"Type-B ignores all internal holes and only keeps the outside shape per layer."
-msgstr ""
-"Esta opción experta agrega todas las partes del modelo en conjunto. El "
-"resultado suele ser que las cavidades internas desaparecen. Dependiendo del "
-"modelo de esto puede requerido o no. La activación de esta opción es a su "
-"propio riesgo. Tipo-A se depende de los modelos normales y trata de mantener "
-"algunos agujeros internos intactos. Tipo-B ignora todos los agujeros "
-"internos y sólo mantiene la forma exterior por capa."
-
-#: Cura/util/profile.py:254
-msgid "Combine everything (Type-B)"
-msgstr "Combinar todo (Tipo-B)"
-
-#: Cura/util/profile.py:255
-msgid "Keep open faces"
-msgstr "Mantener caras abiertas"
-
-#: Cura/util/profile.py:255
-msgid ""
-"This expert option keeps all the open bits of the model intact. Normally "
-"Cura tries to stitch up small holes and remove everything with big holes, "
-"but this option keeps bits that are not properly part of anything and just "
-"goes with whatever is left. This option is usually not what you want, but it "
-"might enable you to slice models otherwise failing to produce proper paths.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-"Esta opción experto mantiene todos los agujeros del modelo intactos. "
-"Normalmente Cura intenta suturar pequeños agujeros y eliminar todo en los "
-"grandes , pero esta opción mantiene agujeros que no son propiamente parte de "
-"nada y sólo va con lo que se deja. Esta opción no suele ser lo que quieras, "
-"pero podría permitir que usted rebane modelos que de lo contrario "
-"resultarían fallidos.\n"
-"Al igual que con todos los \"Correjir horribles \" los resultados pueden "
-"variar y usar a su propio riesgo."
-
-#: Cura/util/profile.py:256
-msgid "Extensive stitching"
-msgstr "Costura amplia"
-
-#: Cura/util/profile.py:256
-msgid ""
-"Extensive stitching tries to fix up open holes in the model by closing the "
-"hole with touching polygons. This algorthm is quite expensive and could "
-"introduce a lot of processing time.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-"Costura amplia intenta de arreglar los agujeros en el modelo cerrando "
-"agujeros con polígonos. Este algoritmo es complejo y puede tardar en "
-"procesar.\n"
-"Igual que \"Fix horrible\" puede tener resultados diversos úsalo bajo tu "
-"riesgo."
-
-#: Cura/util/profile.py:484
-msgid "Save profile on slice"
-msgstr "Guardar perfil al filetear"
-
-#: Cura/util/profile.py:484
-msgid ""
-"When slicing save the profile as [stl_file]_profile.ini next to the model."
-msgstr ""
-"Cuando se filetee guardar el perfil como [stl_file]_profile.ini junto al "
-"modelo."
-
-#: Cura/util/profile.py:485
-msgid "Cost (price/kg)"
-msgstr "Coste (precio/kg)"
-
-#: Cura/util/profile.py:485
-msgid "Cost of your filament per kg, to estimate the cost of the final print."
-msgstr ""
-"Coste de tu filamento por kg, para estimar el coste de la impresión final."
-
-#: Cura/util/profile.py:486
-msgid "Cost (price/m)"
-msgstr "Coster (precio/m)"
-
-#: Cura/util/profile.py:486
-msgid ""
-"Cost of your filament per meter, to estimate the cost of the final print."
-msgstr ""
-"Coste de tu filamento por metro, para estimar el coste de tu impresión final."
-
-#: Cura/util/profile.py:487
-msgid "Auto detect SD card drive"
-msgstr "Autodetectar tajeta SD"
-
-#: Cura/util/profile.py:487
-msgid ""
-"Auto detect the SD card. You can disable this because on some systems "
-"external hard-drives or USB sticks are detected as SD card."
-msgstr ""
-"Autodetectando SD card. Puedes deshabilitar esto porque algunos discos duros "
-"o pendrive son detectados como SD card."
-
-#: Cura/util/profile.py:488
-msgid "Check for updates"
-msgstr "Comprobando actualizaciones"
-
-#: Cura/util/profile.py:488
-msgid "Check for newer versions of Cura on startup"
-msgstr "Comprobar nuevas versiones de Cura en el inicio"
-
-#: Cura/util/profile.py:489
-msgid "Send usage statistics"
-msgstr "Enviar estadisticas de uso"
-
-#: Cura/util/profile.py:489
-msgid "Submit anonymous usage information to improve future versions of Cura"
-msgstr "Enviar información anónima para mejor las próximas versiones de Cura"
-
-#: Cura/util/profile.py:491
-msgid "Density (kg/m3)"
-msgstr "Densidad (kg/m3)"
-
-#: Cura/util/profile.py:491
-msgid ""
-"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
-"This value is used to estimate the weight if the filament used for the print."
-msgstr ""
-"Peso del filamento por m3. Sobre 1240 para el PLA y sobre 1040 para ABS. "
-"Este valor es usado para estimar el peso del filamento usado en la impresión."
-
-#: Cura/util/profile.py:492 Cura/gui/preferencesDialog.py:37
-msgid "Language"
-msgstr "Lenguaje"
-
-#: Cura/util/profile.py:492
-msgid ""
-"Change the language in which Cura runs. Switching language requires a "
-"restart of Cura"
-msgstr ""
-"Cambiar el idioma en el que se ejecuta Cura. El Cambio de idioma requiere un "
-"reinicio del Cura"
-
-#: Cura/util/profile.py:495
-msgid "Model colour"
-msgstr "Color Modelo"
-
-#: Cura/util/profile.py:495
-msgid "Display color for first extruder"
-msgstr "Color de la pantalla para la primera extrusora"
-
-#: Cura/util/profile.py:496
-msgid "Model colour (2)"
-msgstr "Color Modelo (2)"
-
-#: Cura/util/profile.py:496
-msgid "Display color for second extruder"
-msgstr "Color de la pantalla para la segunda extrusora"
-
-#: Cura/util/profile.py:497
-msgid "Model colour (3)"
-msgstr "Color Modelo (3)"
-
-#: Cura/util/profile.py:497
-msgid "Display color for third extruder"
-msgstr "Color de la pantalla por el tercer extrusor"
-
-#: Cura/util/profile.py:498
-msgid "Model colour (4)"
-msgstr "Color Modelo (4)"
-
-#: Cura/util/profile.py:498
-msgid "Display color for forth extruder"
-msgstr "Color de la pantalla para extrusora adelante"
-
-#: Cura/util/profile.py:499
-msgid "Printing window type"
-msgstr "Impresión tipo de ventana"
-
-#: Cura/util/profile.py:499
-msgid "Select the interface used for USB printing."
-msgstr "Seleccione la interfaz que se utiliza para la impresión USB ."
-
-#: Cura/util/profile.py:511
-msgid "Maximum width (mm)"
-msgstr "Máxima anchura (mm)"
-
-#: Cura/util/profile.py:511 Cura/util/profile.py:512 Cura/util/profile.py:513
-msgid "Size of the machine in mm"
-msgstr "Tamaño de la maquina en mm"
-
-#: Cura/util/profile.py:512
-msgid "Maximum depth (mm)"
-msgstr "Maxima profundidad (mm)"
-
-#: Cura/util/profile.py:513
-msgid "Maximum height (mm)"
-msgstr "Máxima altura (mm)"
-
-#: Cura/util/profile.py:514
-msgid "Machine center 0,0"
-msgstr "Centro de la maquina 0,0"
-
-#: Cura/util/profile.py:514
-msgid ""
-"Machines firmware defines the center of the bed as 0,0 instead of the front "
-"left corner."
-msgstr ""
-"Máquinas firmware define el centro de la cama como 0,0 en lugar de la "
-"esquina frontal izquierda."
-
-#: Cura/util/profile.py:515
-msgid "Build area shape"
-msgstr "Construye forma de área"
-
-#: Cura/util/profile.py:515
-msgid "The shape of machine build area."
-msgstr "La forma del área de construcción de la máquina."
-
-#: Cura/util/profile.py:517 Cura/gui/configWizard.py:397
-msgid "Heated bed"
-msgstr "Cama caliente"
-
-#: Cura/util/profile.py:517
-msgid ""
-"If you have an heated bed, this enabled heated bed settings (requires "
-"restart)"
-msgstr ""
-"Si tienes una cama caliente, activalo para tener los ajustes (requiere "
-"reinicio)"
-
-#: Cura/util/profile.py:518
-msgid "GCode Flavor"
-msgstr "GCode Flavor"
-
-#: Cura/util/profile.py:518
-msgid ""
-"Flavor of generated GCode.\n"
-"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
-"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
-"machine instead of the slicer.\n"
-"MakerBot GCode has a few changes in the way GCode is generated, but still "
-"requires MakerWare to generate to X3G.\n"
-"BFB style generates RPM based code.\n"
-"Mach3 uses A,B,C instead of E for extruders."
-msgstr ""
-"Estilo de GCode.\n"
-"Impresoras RepRap suelen usar 5D Gcode (firmwares Marlin y Sprinter).\n"
-"UltiGcode es una variación del código RepRap con mas ajustes en la máquina."
-
-#: Cura/util/profile.py:519
-msgid "Extruder count"
-msgstr "Numero extrusores"
-
-#: Cura/util/profile.py:519
-msgid "Amount of extruders in your machine."
-msgstr "Cantidad de extrusores en tu máquina"
-
-#: Cura/util/profile.py:520 Cura/util/profile.py:522 Cura/util/profile.py:524
-msgid "Offset X"
-msgstr "Desplazamiento X"
-
-#: Cura/util/profile.py:520 Cura/util/profile.py:521
-msgid "The offset of your secondary extruder compared to the primary."
-msgstr "La distancia del segundo extrusor relativa al primero."
-
-#: Cura/util/profile.py:521 Cura/util/profile.py:523 Cura/util/profile.py:525
-msgid "Offset Y"
-msgstr "Desplazamiento Y"
-
-#: Cura/util/profile.py:522 Cura/util/profile.py:523
-msgid "The offset of your tertiary extruder compared to the primary."
-msgstr "La distancia del tercer extrusor relativa al primero."
-
-#: Cura/util/profile.py:524 Cura/util/profile.py:525
-msgid "The offset of your forth extruder compared to the primary."
-msgstr "La distancia del cuarto extrusor relativa al primero"
-
-#: Cura/util/profile.py:526
-msgid "E-Steps per 1mm filament"
-msgstr "Pasos extrusor por 1 mm de filamento"
-
-#: Cura/util/profile.py:526
-msgid ""
-"Amount of steps per mm filament extrusion. If set to 0 then this value is "
-"ignored and the value in your firmware is used."
-msgstr ""
-"Cantidad de pasos por mm de filamento extruido. Si pones 0 este valor será "
-"ignorado y se cogerá el valor del firmware"
-
-#: Cura/util/profile.py:527
-msgid "Serial port"
-msgstr "Puerto Serial"
-
-#: Cura/util/profile.py:527
-msgid "Serial port to use for communication with the printer"
-msgstr "Puerto Serie para comunicarse con la impresora"
-
-#: Cura/util/profile.py:529
-msgid "Baudrate"
-msgstr "Velocidad"
-
-#: Cura/util/profile.py:529
-msgid ""
-"Speed of the serial port communication\n"
-"Needs to match your firmware settings\n"
-"Common values are 250000, 115200, 57600"
-msgstr ""
-"Velocidad del puerto serie\n"
-"Es necesario que coincida con la del firmware\n"
-"Valores habituales 250000, 115200, 57600"
-
-#: Cura/util/profile.py:532
-msgid "Head size towards X min (mm)"
-msgstr "Tamañano de la cabeza hacia X min (mm)"
-
-#: Cura/util/profile.py:532
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "
-"de la boquilla hacia la parte exterior del carro. 75 mm para una Ultimaker "
-"si el ventilador está en el lado izquierdo."
-
-#: Cura/util/profile.py:533
-msgid "Head size towards Y min (mm)"
-msgstr "Tamañano de la cabeza hacia Y min (mm)"
-
-#: Cura/util/profile.py:533 Cura/util/profile.py:534
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "
-"de la boquilla hacia la parte exterior de la cabeza. 18 mm para una "
-"Ultimaker si el ventilador está en el lado izquierdo."
-
-#: Cura/util/profile.py:534
-msgid "Head size towards X max (mm)"
-msgstr "Tamañano de la cabeza hacia X max (mm)"
-
-#: Cura/util/profile.py:535
-msgid "Head size towards Y max (mm)"
-msgstr "Tamañano de la cabeza hacia Y max (mm)"
-
-#: Cura/util/profile.py:535
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "
-"de la boquilla hacia la parte exterior de la cabeza. 35mm para una Ultimaker "
-"si el ventilador está en el lado izquierdo."
-
-#: Cura/util/profile.py:536
-msgid "Printer gantry height (mm)"
-msgstr "Altura pórtico (gantry) de la impresora (mm)"
-
-#: Cura/util/profile.py:536
-msgid ""
-"The height of the gantry holding up the printer head. If an object is higher "
-"then this then you cannot print multiple objects one for one. 60mm for an "
-"Ultimaker."
-msgstr ""
-"La altura del carro que soporta el cabezal de la impresora. Si un objeto es "
-"más alto que esto, entonces no puede imprimirse varios objetos uno a uno. "
-"60 mm para un Ultimaker."
-
-#: Cura/util/profile.py:538
-#, python-format
-msgid "More flow than 150% is rare and usually not recommended."
-msgstr ""
-
-#: Cura/util/profile.py:539
-#, python-format
-msgid "Less flow than 50% is rare and usually not recommended."
-msgstr ""
-
-#: Cura/util/profile.py:540
-#, python-format
-msgid ""
-"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
-"are not recommended."
-msgstr ""
-"Capas más finas que %.2fmm (80%% del diámetro de la boquilla) usualmente dan "
-"malos resultados y no son recomendables."
-
-#: Cura/util/profile.py:542
-msgid ""
-"It is highly unlikely that your machine can achieve a printing speed above "
-"150mm/s"
-msgstr ""
-"Es muy poco probable que su máquina puede alcanzar una velocidad de "
-"impresión por encima de 150 mm/s"
-
-#: Cura/util/profile.py:544 Cura/util/profile.py:545 Cura/util/profile.py:546
-#: Cura/util/profile.py:547
-msgid "Temperatures above 260C could damage your machine, be careful!"
-msgstr "Temperaturas por encima de 260C puede dañar tu impresora, ¡CUIDADO!"
-
-#: Cura/util/profile.py:548 Cura/util/profile.py:549 Cura/util/profile.py:550
-#: Cura/util/profile.py:551
-msgid ""
-"Are you sure your filament is that thick? Normal filament is around 3mm or "
-"1.75mm."
-msgstr ""
-"¿Estás seguro del grosor? Normalmente los filamentos son de 3mm o 1.75mm."
-
-#: Cura/util/profile.py:552
-msgid ""
-"It is highly unlikely that your machine can achieve a travel speed above "
-"300mm/s"
-msgstr ""
-"Es muy poco probable que su máquina puede alcanzar una velocidad de "
-"desplazamiento por encima de 300 mm/s"
-
-#: Cura/util/profile.py:553
-#, python-format
-msgid ""
-"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
-"results and is not recommended."
-msgstr ""
-"Una capa final de mas de %.2fmm (3/4 del tamaño del cabezal) usualmente da "
-"malos resultados y no es recomendable."
-
-#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
-#, python-format
-msgid "Printing on %s"
-msgstr "Imprimiendo en %s"
-
-#: Cura/gui/printWindow.py:324
-msgid ""
-"Your computer is running on battery power.\n"
-"Connect your computer to AC power or your print might not finish."
-msgstr ""
-"Tu ordenador esta usando la bateria.\n"
-"Conectar tu ordenador a la corriente o tu impresión no finalizará."
-
-#: Cura/gui/printWindow.py:334
-msgid ""
-"InfoLine from printer connection\n"
-"InfoLine from dialog\n"
-"Extra line\n"
-"More lines for layout\n"
-"More lines for layout\n"
-"More lines for layout"
-msgstr ""
-"InfoLine de impresora conexión\n"
-"InfoLine de diálogo\n"
-"Línea extra\n"
-"Más líneas de distribución\n"
-"Más líneas de distribución\n"
-"Más líneas de diseño"
-
-#: Cura/gui/printWindow.py:336
-msgid "Connect"
-msgstr "Conectar"
-
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
-msgid "Print"
-msgstr "Imprimir"
-
-#: Cura/gui/printWindow.py:339
-msgid "Pause"
-msgstr "Pausar"
-
-#: Cura/gui/printWindow.py:340
-msgid "Cancel print"
-msgstr "Cancelar impresión"
-
-#: Cura/gui/printWindow.py:341
-msgid "Error log"
-msgstr "Errores"
-
-#: Cura/gui/pluginPanel.py:31
-msgid "Plugins:"
-msgstr "Complementos:"
-
-#: Cura/gui/pluginPanel.py:35
-msgid "Open plugin location"
-msgstr "Abrir localización complementos"
-
-#: Cura/gui/pluginPanel.py:36
-msgid "Enabled plugins"
-msgstr "Habilitar complementos"
-
-#: Cura/gui/pluginPanel.py:159
-msgid "You need to select a plugin before you can add anything."
-msgstr "Tienes que selecionar un complemento antes de añadir nada"
-
-#: Cura/gui/pluginPanel.py:159
-msgid "Error: no plugin selected"
-msgstr "Error: no hay complento seleccionado"
-
-#: Cura/gui/tools/youmagineGui.py:78
-msgid "Checking token"
-msgstr "Comprobando token"
-
-#: Cura/gui/tools/youmagineGui.py:82
-msgid "Failed to contact YouMagine.com"
-msgstr "Fallo conectando con YouMagine.com"
-
-#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
-msgid "YouMagine error."
-msgstr "Error de YouMagine."
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "Cura is now authorized to share on YouMagine"
-msgstr "Cura esta ahora autorizado para compartir en YouMagine"
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "YouMagine."
-msgstr "YouMagine."
-
-#: Cura/gui/tools/youmagineGui.py:112
-msgid "Creating new design on YouMagine..."
-msgstr "Creando nuevo diseño en YouMagine..."
-
-#: Cura/gui/tools/youmagineGui.py:116
-msgid "Failed to create a design, nothing uploaded!"
-msgstr "Fallo al crear el diseño, nada subido!"
-
-#: Cura/gui/tools/youmagineGui.py:120
-#, python-format
-msgid "Building model %s..."
-msgstr "Construyendo modelo %s..."
-
-#: Cura/gui/tools/youmagineGui.py:131
-#, python-format
-msgid "Uploading model %s..."
-msgstr "Subiendo modelo %s..."
-
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148
-#, python-format
-msgid "Failed to upload %s!"
-msgstr "Fallo al cargar %s!"
-
-#: Cura/gui/tools/youmagineGui.py:137
-#, python-format
-msgid "Uploading file %s..."
-msgstr "Subiendo archivo %s..."
-
-#: Cura/gui/tools/youmagineGui.py:145
-#, python-format
-msgid "Uploading image %s..."
-msgstr "Subiendo imagen %s..."
-
-#: Cura/gui/tools/youmagineGui.py:153
-msgid "Failed to upload snapshot!"
-msgstr "Fallo al cargar foto!"
-
-#: Cura/gui/tools/youmagineGui.py:158
-msgid "Publishing design..."
-msgstr "Publicando diseño..."
-
-#: Cura/gui/tools/youmagineGui.py:230
-msgid "Request authorization from YouMagine"
-msgstr "Requerida autorización desde YouMagine"
-
-#: Cura/gui/tools/youmagineGui.py:231
-msgid "Paste token here"
-msgstr "Pegar token aquí"
-
-#: Cura/gui/tools/youmagineGui.py:237
-msgid ""
-"To share your designs on YouMagine\n"
-"you need an account on YouMagine.com\n"
-"and authorize Cura to access your account."
-msgstr ""
-"Para compartir tus diseños en YouMagine\n"
-"necesitas una cuenta en YouMagine.com\n"
-"y autorizar a Cura para el acceso."
-
-#: Cura/gui/tools/youmagineGui.py:239
-msgid ""
-"This will open a browser window where you can\n"
-"authorize Cura to access your YouMagine account.\n"
-"You can revoke access at any time\n"
-"from YouMagine.com"
-msgstr ""
-"Esto abrirá una ventana del navegador donde se puede \n"
-"autorizar Cura para acceder a su cuenta YouMagine. \n"
-"Usted puede revocar el acceso en cualquier momento \n"
-"en YouMagine.com"
-
-#: Cura/gui/tools/youmagineGui.py:274
-msgid "Design name"
-msgstr "Nombre del diseño"
-
-#: Cura/gui/tools/youmagineGui.py:278
-msgid "Publish after upload"
-msgstr "Publicar despues de cargar"
-
-#: Cura/gui/tools/youmagineGui.py:279
-msgid "Share!"
-msgstr "¡Comparte!"
-
-#: Cura/gui/tools/youmagineGui.py:287
-msgid "Add..."
-msgstr "Añadir..."
-
-#: Cura/gui/tools/youmagineGui.py:289
-msgid "Webcam..."
-msgstr "Webcam..."
-
-#: Cura/gui/tools/youmagineGui.py:299
-msgid ""
-"Directly publish the design after uploading.\n"
-"Without this check the design will not be public\n"
-"until you publish it yourself on YouMagine.com"
-msgstr ""
-"Publicar directamente el diseño despues de subir.\n"
-"Sin esta marca el diseño no sera publico\n"
-"hasta que lo hagas manualmente en YouMagine.com"
-
-#: Cura/gui/tools/youmagineGui.py:305
-msgid "Design name:"
-msgstr "Nombre del diseño:"
-
-#: Cura/gui/tools/youmagineGui.py:307
-msgid "Description:"
-msgstr "Descripción:"
-
-#: Cura/gui/tools/youmagineGui.py:309
-msgid "Category:"
-msgstr "Categoria:"
-
-#: Cura/gui/tools/youmagineGui.py:311
-msgid "License:"
-msgstr "Licencia:"
-
-#: Cura/gui/tools/youmagineGui.py:314
-msgid "Images:"
-msgstr "Imagenes:"
-
-#: Cura/gui/tools/youmagineGui.py:317
-msgid "Related design files:"
-msgstr "Diseños relacionados:"
-
-#: Cura/gui/tools/youmagineGui.py:340
-msgid "The name cannot be empty"
-msgstr "El nombre no puede estar en blanco"
-
-#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
-msgid "New design error."
-msgstr "Error en el nuevo diseño."
-
-#: Cura/gui/tools/youmagineGui.py:344
-msgid "The description cannot be empty"
-msgstr "La descripción no puede estar vacia"
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "No webcam found on your system"
-msgstr "No tienes webcam en tu computadora"
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "Webcam error"
-msgstr "Error de la webcam"
-
-#: Cura/gui/tools/imageToMesh.py:28
-msgid "Height (mm)"
-msgstr "Espesor de capa (mm)"
-
-#: Cura/gui/tools/imageToMesh.py:32
-msgid "Base (mm)"
-msgstr "Grosor de base (mm)"
-
-#: Cura/gui/tools/imageToMesh.py:36
-msgid "Width (mm)"
-msgstr "Ancho (mm)"
-
-#: Cura/gui/tools/imageToMesh.py:40
-msgid "Depth (mm)"
-msgstr "Diametro (mm)"
-
-#: Cura/gui/configWizard.py:231
-msgid "Add new machine wizard"
-msgstr "Asistente para nueva máquina"
-
-#: Cura/gui/configWizard.py:233
-msgid "First time run wizard"
-msgstr "Hacer asistencia inicial"
-
-#: Cura/gui/configWizard.py:234
-msgid "Welcome, and thanks for trying Cura!"
-msgstr "Bienvenido, y gracias por ¡usar Cura!"
-
-#: Cura/gui/configWizard.py:236
-msgid "This wizard will help you in setting up Cura for your machine."
-msgstr "Este asistente le ayudará en la creación de Cura para su máquina."
-
-#: Cura/gui/configWizard.py:239
-msgid "Select your language:"
-msgstr "Selecciona tu lenguaje:"
-
-#: Cura/gui/configWizard.py:266
-msgid "Older models"
-msgstr "Modelos antiguos"
-
-#: Cura/gui/configWizard.py:283
-msgid "Printrbot Selection"
-msgstr "Selección printrbot"
-
-#: Cura/gui/configWizard.py:285
-msgid "Select which Printrbot machine you have:"
-msgstr "Seleccione que Printrbot máquina tiene"
-
-#: Cura/gui/configWizard.py:349
-msgid "Other machine information"
-msgstr "Otra información de la máquina"
-
-#: Cura/gui/configWizard.py:350
-msgid "The following pre-defined machine profiles are available"
-msgstr "Los siguientes perfiles de máquina predefinidos están disponibles"
-
-#: Cura/gui/configWizard.py:351
-msgid ""
-"Note that these profiles are not guaranteed to give good results,\n"
-"or work at all. Extra tweaks might be required.\n"
-"If you find issues with the predefined profiles,\n"
-"or want an extra profile.\n"
-"Please report it at the github issue tracker."
-msgstr ""
-"Tenga en cuenta que estos perfiles no están garantizados para dar buenos "
-"resultados,\n"
-"o el trabajo en absoluto. podría ser necesario retoques adicionales.\n"
-" Si usted encuentra problemas con los perfiles predefinidos,\n"
-"o quieren un perfil extra. \n"
-"Por favor repórtelo a la de seguimiento de incidencias github."
-
-#: Cura/gui/configWizard.py:362
-msgid "Custom..."
-msgstr "Personalizable..."
-
-#: Cura/gui/configWizard.py:380
-msgid "Cura Ready!"
-msgstr "¡Cura listo!"
-
-#: Cura/gui/configWizard.py:381
-msgid "Cura is now ready to be used!"
-msgstr "¡Cura esta listo para su uso!"
-
-#: Cura/gui/configWizard.py:385
-msgid "Custom RepRap information"
-msgstr "Personalizar la información"
-
-#: Cura/gui/configWizard.py:386
-msgid ""
-"RepRap machines can be vastly different, so here you can set your own "
-"settings."
-msgstr ""
-"Máquinas RepRap pueden ser muy diferentes, por lo que aquí se puede "
-"establecer su propio ajustes."
-
-#: Cura/gui/configWizard.py:387
-msgid ""
-"Be sure to review the default profile before running it on your machine."
-msgstr ""
-"Asegúrese de revisar el perfil predeterminado antes de ejecutarlo en su "
-"máquina."
-
-#: Cura/gui/configWizard.py:388
-msgid ""
-"If you like a default profile for your machine added,\n"
-"then make an issue on github."
-msgstr ""
-"Si quieres añadir un perfil por defecto para tu máquina,\n"
-"crea un requerimiento en el github."
-
-#: Cura/gui/configWizard.py:390
-msgid "You will have to manually install Marlin or Sprinter firmware."
-msgstr "Tendrás que instalar manual Marlin o Sprinter"
-
-#: Cura/gui/configWizard.py:392
-msgid "Machine name"
-msgstr "Nombre de la máquina"
-
-#: Cura/gui/configWizard.py:393
-msgid "Machine width (mm)"
-msgstr "Anchura máquina (mm)"
-
-#: Cura/gui/configWizard.py:394
-msgid "Machine depth (mm)"
-msgstr "Produndidad máquina (mm)"
-
-#: Cura/gui/configWizard.py:395
-msgid "Machine height (mm)"
-msgstr "Altura máquina (mm)"
-
-#: Cura/gui/configWizard.py:398
-msgid "Bed center is 0,0,0 (RoStock)"
-msgstr "Centro de la base en 0,0,0 (Rostock)"
-
-#: Cura/gui/configWizard.py:418
-msgid "Select your machine"
-msgstr "Selecciona tu maquina"
-
-#: Cura/gui/configWizard.py:419
-msgid "What kind of machine do you have:"
-msgstr "Que tipo de máquina tienes:"
-
-#: Cura/gui/configWizard.py:434
-msgid "Other (Ex: RepRap, MakerBot, Witbox)"
-msgstr "Otras (ej. RepRap, witbox, etc)"
-
-#: Cura/gui/configWizard.py:437
-msgid ""
-"The collection of anonymous usage information helps with the continued "
-"improvement of Cura."
-msgstr "La recolección de datos de utilización anónima ayuda a mejorar Cura."
-
-#: Cura/gui/configWizard.py:438
-msgid ""
-"This does NOT submit your models online nor gathers any privacy related "
-"information."
-msgstr ""
-"Esta hace que NO envie sus modelos online ni recopila datos relacionados con "
-"su privacidad."
-
-#: Cura/gui/configWizard.py:439
-msgid "Submit anonymous usage information:"
-msgstr "Enviar información de uso anónima:"
-
-#: Cura/gui/configWizard.py:440
-msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
-msgstr "Para más detalles: http://wiki.ultimaker.com/Cura:stats"
-
-#: Cura/gui/configWizard.py:557
-msgid "Select upgraded parts you have"
-msgstr "Selecciona mejoras que tienes"
-
-#: Cura/gui/configWizard.py:558
-msgid ""
-"To assist you in having better default settings for your Ultimaker\n"
-"Cura would like to know which upgrades you have in your machine."
-msgstr ""
-"Para ayudarle a tener mejores ajustes predeterminados para su Ultimaker \n"
-"Cura necesitaría saber qué actualizaciones que tiene en su máquina."
-
-#: Cura/gui/configWizard.py:560
-msgid "Extruder drive upgrade"
-msgstr "Mejora extrusor"
-
-#: Cura/gui/configWizard.py:561
-msgid "Heated printer bed (kit)"
-msgstr "Cama caliente (kit)"
-
-#: Cura/gui/configWizard.py:562
-msgid "Heated printer bed (self built)"
-msgstr "Cama caliente (autoconstruida)"
-
-#: Cura/gui/configWizard.py:563
-msgid "Dual extrusion (experimental)"
-msgstr "Extrusion doble (experimental)"
-
-#: Cura/gui/configWizard.py:565
-msgid ""
-"If you have an Ultimaker bought after october 2012 you will have the\n"
-"Extruder drive upgrade. If you do not have this upgrade,\n"
-"it is highly recommended to improve reliability."
-msgstr ""
-"Si tienes una Ultimaker comprada posterior a Octubre de 2012 tu tienes\n"
-"la mejora en el extrusor. Si no tienes esta mejora,\n"
-"es recomendable para mejorar el desempeño."
-
-#: Cura/gui/configWizard.py:566
-msgid ""
-"This upgrade can be bought from the Ultimaker webshop\n"
-"or found on thingiverse as thing:26094"
-msgstr ""
-"Esta mejora puede comprarse en la webshop de Ultimaker\n"
-"o encontrarse en thingiverse thing:26094"
-
-#: Cura/gui/configWizard.py:588
-msgid "Upgrade Ultimaker Firmware"
-msgstr "Actuliza Firmware Ultimaker"
-
-#: Cura/gui/configWizard.py:589
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer.\n"
-"This firmware controls the step motors, regulates the temperature\n"
-"and ultimately makes your printer work."
-msgstr ""
-"Firmware es un software que se ejecuta en la propia impresora.\n"
-"Controla los pasos de motor, temperatura\n"
-"y finalmente hace que tu impresora funcione."
-
-#: Cura/gui/configWizard.py:591
-msgid ""
-"The firmware shipping with new Ultimakers works, but upgrades\n"
-"have been made to make better prints, and make calibration easier."
-msgstr ""
-"El firmware que trae la Ultimaker funciona, pero actualizaciones\n"
-"hacen que se imprima y se calibre mejor."
-
-#: Cura/gui/configWizard.py:593
-msgid ""
-"Cura requires these new features and thus\n"
-"your firmware will most likely need to be upgraded.\n"
-"You will get the chance to do so now."
-msgstr ""
-"Cura requiere estas nuevas características y por lo tanto\n"
-"el firmware es necesario que tenga que ser actualizado. \n"
-"Usted tendrá la oportunidad de hacerlo ahora."
-
-#: Cura/gui/configWizard.py:599
-msgid "Do not upgrade to this firmware if:"
-msgstr "No actualices a este firmware si:"
-
-#: Cura/gui/configWizard.py:600
-msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
-msgstr "* Tienes una máquina basada en el antiguo ATMega1280"
-
-#: Cura/gui/configWizard.py:601
-msgid "* Build your own heated bed"
-msgstr "* Construye tu propia cama"
-
-#: Cura/gui/configWizard.py:602
-msgid "* Have other changes in the firmware"
-msgstr "Tiene otros cambios en el firmware"
-
-#: Cura/gui/configWizard.py:622
-msgid "Ultimaker Checkup"
-msgstr "Ultimaker chequeada"
-
-#: Cura/gui/configWizard.py:636
-msgid ""
-"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
-"You can skip these if you know your machine is functional."
-msgstr ""
-"Es una buena idea hacer algunos chequeos ahora en tu Ultimaker.\n"
-"Puedes obviarlos si tu máquina es funcional."
-
-#: Cura/gui/configWizard.py:637
-msgid "Run checks"
-msgstr "Iniciar chequeos"
-
-#: Cura/gui/configWizard.py:637
-msgid "Skip checks"
-msgstr "Saltar comprobaciones"
-
-#: Cura/gui/configWizard.py:641
-msgid "Communication:"
-msgstr "Comunicación:"
-
-#: Cura/gui/configWizard.py:642
-msgid "Temperature:"
-msgstr "Temperatura:"
-
-#: Cura/gui/configWizard.py:643
-msgid "Endstops:"
-msgstr "Final de carrera:"
-
-#: Cura/gui/configWizard.py:648
-msgid "Show error log"
-msgstr "Mostrar log de errores"
-
-#: Cura/gui/configWizard.py:682 Cura/gui/configWizard.py:1119
-#: Cura/gui/configWizard.py:1338
-msgid "Connecting to machine."
-msgstr "Conectando a la maquina"
-
-#: Cura/gui/configWizard.py:703
-msgid "Cooldown before temperature check."
-msgstr "Enfriar antes de comprobar la temperatura"
-
-#: Cura/gui/configWizard.py:709 Cura/gui/configWizard.py:716
-msgid "Checking the heater and temperature sensor."
-msgstr "Comprueba el extrusor y el sensor de temperatura"
-
-#: Cura/gui/configWizard.py:727
-msgid "Please make sure none of the endstops are pressed."
-msgstr "Por favor asegurate que los endstosp no estan presionados."
-
-#: Cura/gui/configWizard.py:740
-msgid "Temperature measurement FAILED!"
-msgstr "¡La Medición de temperatura a FALLADO!"
-
-#: Cura/gui/configWizard.py:745
-#, python-format
-msgid "Head temperature: %d"
-msgstr "Temp. cabezal %d"
-
-#: Cura/gui/configWizard.py:752 Cura/gui/configWizard.py:761
-#, python-format
-msgid "Communication State: %s"
-msgstr "Estado de comunicación: %s"
-
-#: Cura/gui/configWizard.py:755 Cura/gui/configWizard.py:1296
-#: Cura/gui/configWizard.py:1514
-msgid "Failed to establish connection with the printer."
-msgstr "Fallo al establecer la conexión con la impresora"
-
-#: Cura/gui/configWizard.py:801 Cura/gui/configWizard.py:810
-msgid "Please press the left X endstop."
-msgstr "Presiona el fin de carrera X izquierdo."
-
-#: Cura/gui/configWizard.py:805
-msgid "Please press the right X endstop."
-msgstr "Presiona el fin de carrera X derecho."
-
-#: Cura/gui/configWizard.py:815
-msgid "Please press the front Y endstop."
-msgstr "Presiona el fin de carrera Y delantero. "
-
-#: Cura/gui/configWizard.py:821 Cura/gui/configWizard.py:830
-msgid "Please press the top Z endstop."
-msgstr "Presiona el fin de carrera Z superior. "
-
-#: Cura/gui/configWizard.py:825
-msgid "Please press the back Y endstop."
-msgstr "Presiona el fin de carrera Y trasero. "
-
-#: Cura/gui/configWizard.py:837 Cura/gui/configWizard.py:850
-msgid "Checkup finished"
-msgstr "Chequeo finalizado"
-
-#: Cura/gui/configWizard.py:844
-msgid "Please press the bottom Z endstop."
-msgstr "Presiona el fin de carrera Z inferior. "
-
-#: Cura/gui/configWizard.py:865 Cura/gui/configWizard.py:888
-msgid "Ultimaker Calibration"
-msgstr "Calibración de la Ultimaker"
-
-#: Cura/gui/configWizard.py:893
-msgid "Calibrating the Steps Per E requires some manual actions."
-msgstr "Calibrar los pasos del Extrusor requiere algunas acciones manuales."
-
-#: Cura/gui/configWizard.py:894
-msgid "First remove any filament from your machine."
-msgstr "Primero remover cualquier filamento de tu maquina"
-
-#: Cura/gui/configWizard.py:895
-msgid ""
-"Next put in your filament so the tip is aligned with the\n"
-"top of the extruder drive."
-msgstr ""
-"A continuación, pon en el filamento de manera que la punta quede alineada "
-"con la \n"
-"superior de la unidad extrusora."
-
-#: Cura/gui/configWizard.py:896
-msgid "We'll push the filament 100mm"
-msgstr "Empujaremos 100 mm de filamento"
-
-#: Cura/gui/configWizard.py:897
-msgid "Extrude 100mm filament"
-msgstr "Extruir 100mm filamento"
-
-#: Cura/gui/configWizard.py:898
-msgid ""
-"Now measure the amount of extruded filament:\n"
-"(this can be more or less then 100mm)"
-msgstr ""
-"Ahora mide la cantidad de filamento extruido:\n"
-"(debe ser mas o menos 100mm)"
-
-#: Cura/gui/configWizard.py:899
-msgid "Save"
-msgstr "Guardar"
-
-#: Cura/gui/configWizard.py:900
-msgid "This results in the following steps per E:"
-msgstr "Esto se da como resultado los siguiente pasos por E:"
-
-#: Cura/gui/configWizard.py:902
-msgid "You can repeat these steps to get better calibration."
-msgstr "Puedes repetir estos paso para conseguir una mejor calibración."
-
-#: Cura/gui/configWizard.py:905
-msgid ""
-"If you still have filament in your printer which needs\n"
-"heat to remove, press the heat up button below:"
-msgstr ""
-"Si aún tienes filamento en tu impresora que necesita\n"
-"calor para removerlo, presiona el botón de calentar debajo:"
-
-#: Cura/gui/configWizard.py:906
-msgid "Heatup for filament removal"
-msgstr "Calentar para remover filamento"
-
-#: Cura/gui/configWizard.py:931 Cura/gui/configWizard.py:965
-msgid ""
-"Error: Failed to open serial port to machine\n"
-"If this keeps happening, try disconnecting and reconnecting the USB cable"
-msgstr ""
-"Error: Fallo al abrir el Puerto Serie de la maquina\n"
-"Si sigue ocurriendo, prueba a desconectar y reconectar el cable USB"
-
-#: Cura/gui/configWizard.py:1005
-msgid "Ultimaker2"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1006
-msgid "Congratulations on your the purchase of your brand new Ultimaker2."
-msgstr "Felicidades por la compra de su nueva Ultimaker2."
-
-#: Cura/gui/configWizard.py:1007
-msgid "Cura is now ready to be used with your Ultimaker2."
-msgstr "Cura ya está listo para ser usado con su Ultimaker2."
-
-#: Cura/gui/configWizard.py:1012
-msgid "Lulzbot TAZ/Mini"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1013
-msgid "Cura is now ready to be used with your Lulzbot."
-msgstr "Cura esta ahora autorizado para compartir en YouMagine"
-
-#: Cura/gui/configWizard.py:1018
-msgid "Configuration Wizard"
-msgstr "Guía de configuración"
-
-#: Cura/gui/configWizard.py:1079 Cura/gui/configWizard.py:1527
-msgid "Bed leveling wizard"
-msgstr "Nivelación de la cama"
-
-#: Cura/gui/configWizard.py:1081
-msgid "This wizard will help you in leveling your printer bed"
-msgstr "Este asistente le ayudará a nivelar la cama de la impresora"
-
-#: Cura/gui/configWizard.py:1083
-msgid "It will do the following steps"
-msgstr "Lo hará los siguientes pasos"
-
-#: Cura/gui/configWizard.py:1084
-msgid "* Move the printer head to each corner"
-msgstr "* Mueva el cabezal a cada esquina"
-
-#: Cura/gui/configWizard.py:1085
-msgid " and let you adjust the height of the bed to the nozzle"
-msgstr " y le permiten ajustar la altura de la cama a la boquilla"
-
-#: Cura/gui/configWizard.py:1086
-msgid "* Print a line around the bed to check if it is level"
-msgstr "* Imprimir una línea alrededor de la cama para chequear el nivel"
-
-#: Cura/gui/configWizard.py:1089 Cura/gui/configWizard.py:1314
-msgid "Connect to printer"
-msgstr "Conectando a la maquina"
-
-#: Cura/gui/configWizard.py:1093 Cura/gui/configWizard.py:1320
-msgid "Resume"
-msgstr "Continuar"
-
-#: Cura/gui/configWizard.py:1094
-msgid "Up 0.2mm"
-msgstr "Arriba 0,2mm"
-
-#: Cura/gui/configWizard.py:1094
-msgid "Down 0.2mm"
-msgstr "Abajo 0,2mm"
-
-#: Cura/gui/configWizard.py:1095
-msgid "Up 10mm"
-msgstr "Arriba 10mm"
-
-#: Cura/gui/configWizard.py:1095
-msgid "Down 10mm"
-msgstr "Abajo 10mm"
-
-#: Cura/gui/configWizard.py:1155
-msgid "Homing printer..."
-msgstr "Punto de inicio..."
-
-#: Cura/gui/configWizard.py:1165
-msgid "Moving head to back center..."
-msgstr "Moviendo la cabeza a centro posterior..."
-
-#: Cura/gui/configWizard.py:1172
-msgid "Moving head to back left corner..."
-msgstr "Moviendo la cabeza hacia atrás esquina izquierda..."
-
-#: Cura/gui/configWizard.py:1180 Cura/gui/configWizard.py:1194
-msgid "Moving head to front right corner..."
-msgstr "Moviendo la cabeza hacia atrás esquina derecha..."
-
-#: Cura/gui/configWizard.py:1187
-msgid "Moving head to back right corner..."
-msgstr "Moviendo la cabeza hacia atrás esquina atras a la derecha..."
-
-#: Cura/gui/configWizard.py:1201
-msgid "Heating up printer..."
-msgstr "Calentar impresora..."
-
-#: Cura/gui/configWizard.py:1208
-msgid "Printing a square on the printer bed at 0.3mm height."
-msgstr "Impresión de una cuadrado en la cama impresora en 0,3mm de altura."
-
-#: Cura/gui/configWizard.py:1248
-msgid ""
-"Adjust the front left screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-"Ajuste el tornillo delantero izquierdo de su cama impresora \n"
-"De modo que la boquilla sólo golpea la cama."
-
-#: Cura/gui/configWizard.py:1253
-msgid ""
-"Adjust the back screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-"Ajuste el tornillo de atrás de su cama impresora \n"
-"De modo que boquilla sólo golpea la cama."
-
-#: Cura/gui/configWizard.py:1255
-msgid ""
-"Adjust the back left screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-"Ajustar la izquierda el tornillo posterior de la impresora cama \n"
-"De modo que boquilla sólo golpea la cama."
-
-#: Cura/gui/configWizard.py:1259
-msgid ""
-"Adjust the back right screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-"Ajustar el tornillo posterior derecha de la impresora cama \n"
-"De modo que la boquilla sólo golpea la cama."
-
-#: Cura/gui/configWizard.py:1263
-msgid ""
-"Adjust the front right screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-"Ajuste el tornillo frontal derecha de la impresora cama \n"
-"De modo que la boquilla sólo golpea la cama."
-
-#: Cura/gui/configWizard.py:1267
-#, python-format
-msgid "Heating up printer: %d/%d"
-msgstr "El calentamiento de la impresora: %d/%d"
-
-#: Cura/gui/configWizard.py:1269
-msgid ""
-"The printer is hot now. Please insert some PLA filament into the printer."
-msgstr ""
-" La impresora está caliente ahora. Por favor, inserte algunos filamentos PLA "
-"en la impresora."
-
-#: Cura/gui/configWizard.py:1278
-msgid "Use the up/down buttons to move the bed and adjust your Z endstop."
-msgstr ""
-"Utilice los botones arriba/abajo hasta que mover la cama y ajustar su Z tope "
-"final."
-
-#: Cura/gui/configWizard.py:1290
-msgid ""
-"Calibration finished.\n"
-"The squares on the bed should slightly touch each other."
-msgstr ""
-"Calibración terminada.\n"
-"El cuadrado en la cama deben tocar ligeramente el uno al otro."
-
-#: Cura/gui/configWizard.py:1311
-msgid ""
-"This wizard will help you in calibrating the printer head offsets of your "
-"dual extrusion machine"
-msgstr ""
-"Este asistente le ayudará en la calibración de los desplazamientos de la "
-"cabeza impresora de la máquina de extrusión de doble"
-
-#: Cura/gui/configWizard.py:1344
-msgid "Printing initial calibration cross"
-msgstr "Impresión de la cruz de calibración inicial"
-
-#: Cura/gui/configWizard.py:1392
-msgid ""
-"Please measure the distance between the horizontal lines in millimeters."
-msgstr ""
-"Por favor, mida la distancia entre las líneas horizontales en milímetros."
-
-#: Cura/gui/configWizard.py:1402
-msgid "Printing the fine calibration lines."
-msgstr "Impresión de las líneas de calibración fina."
-
-#: Cura/gui/configWizard.py:1457
-msgid ""
-"Which horizontal line number lays perfect on top of each other? Front most "
-"line is zero."
-msgstr ""
-"¿Qué número de línea horizontal establece perfecta en la parte superior de "
-"uno al otro? Frente más línea es cero."
-
-#: Cura/gui/configWizard.py:1468
-#, python-format
-msgid "Calibration finished. Offsets are: %s %s"
-msgstr "Calibración terminada. Las compensaciones son: %s %s"
-
-#: Cura/gui/configWizard.py:1481
-msgid "Please load both extruders with PLA."
-msgstr "Por favor cargar ambos extrusoras con PLA."
-
-#: Cura/gui/configWizard.py:1490
-msgid "Homing printer and heating up both extruders."
-msgstr "Posición de inicio y calentar ambos extrusoras."
-
-#: Cura/gui/configWizard.py:1500
-msgid "Please measure the distance between the vertical lines in millimeters."
-msgstr ""
-"Por favor, mida la distancia entre las líneas verticales en milímetros."
-
-#: Cura/gui/configWizard.py:1507
-msgid ""
-"Which vertical line number lays perfect on top of each other? Leftmost line "
-"is zero."
-msgstr ""
-"¿Qué número línea vertical establece perfecta en la parte superior de uno al "
-"otro? Línea de más a la izquierda es cero."
-
-#: Cura/gui/configWizard.py:1556
-msgid "Head offset wizard"
-msgstr "Asistente compensación del cabezal"
-
-#: Cura/gui/util/engineResultView.py:168
-#, python-format
-msgid "Loading toolpath for visualization (%d%%)"
-msgstr "Cargando trazados para visualización (%d%%)"
-
-#: Cura/gui/util/openglGui.py:242
-msgid "An error has occurred during the 3D view drawing."
-msgstr "Un error ha ocurrido durante el regenerado de la vista 3D."
-
-#: Cura/gui/util/openglGui.py:250
-msgid "3D window error"
-msgstr "Error en la ventana 3D"
-
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:635
-msgid "A new version of Cura is available, would you like to download?"
-msgstr "Una nueva versión de Cura esta disponible, ¿quieres descargarla?"
-
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:635
-msgid "New version available"
-msgstr "Nueva versión disponible"
-
-#: Cura/gui/sceneView.py:64
-msgid "Load"
-msgstr "Cargar"
-
-#: Cura/gui/sceneView.py:69
-msgid "Rotate"
-msgstr "Rotar"
-
-#: Cura/gui/sceneView.py:70
-msgid "Scale"
-msgstr "Escala"
-
-#: Cura/gui/sceneView.py:71
-msgid "Mirror"
-msgstr "Simetria"
-
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
-msgid "Reset"
-msgstr "Reiniciar"
-
-#: Cura/gui/sceneView.py:74
-msgid "Lay flat"
-msgstr "Recostar"
-
-#: Cura/gui/sceneView.py:77
-msgid "To max"
-msgstr "Al máximo"
-
-#: Cura/gui/sceneView.py:79
-msgid "Mirror X"
-msgstr "Simetria X"
-
-#: Cura/gui/sceneView.py:80
-msgid "Mirror Y"
-msgstr "Simetria Y"
-
-#: Cura/gui/sceneView.py:81
-msgid "Mirror Z"
-msgstr "Simetria Z"
-
-#: Cura/gui/sceneView.py:89
-msgid "Scale X"
-msgstr "Escala X"
-
-#: Cura/gui/sceneView.py:91
-msgid "Scale Y"
-msgstr "Escala Y"
-
-#: Cura/gui/sceneView.py:93
-msgid "Scale Z"
-msgstr "Escala Z"
-
-#: Cura/gui/sceneView.py:95
-msgid "Size X (mm)"
-msgstr "Tamaño X (mm)"
-
-#: Cura/gui/sceneView.py:97
-msgid "Size Y (mm)"
-msgstr "Tamaño Y (mm)"
-
-#: Cura/gui/sceneView.py:99
-msgid "Size Z (mm)"
-msgstr "Tamaño Z (mm)"
-
-#: Cura/gui/sceneView.py:101
-msgid "Uniform scale"
-msgstr "Escala Uniforme"
-
-#: Cura/gui/sceneView.py:104
-msgid "View mode"
-msgstr "Modo vista"
-
-#: Cura/gui/sceneView.py:104
-msgid "Normal"
-msgstr "Normal"
-
-#: Cura/gui/sceneView.py:104
-msgid "Overhang"
-msgstr "Salientes"
-
-#: Cura/gui/sceneView.py:104
-msgid "Transparent"
-msgstr "Transparente"
-
-#: Cura/gui/sceneView.py:104
-msgid "X-Ray"
-msgstr "Rayos X"
-
-#: Cura/gui/sceneView.py:104
-msgid "Layers"
-msgstr "Capas"
-
-#: Cura/gui/sceneView.py:106
-msgid "Share on YouMagine"
-msgstr "Comparte en YoMagine"
-
-#: Cura/gui/sceneView.py:204
-msgid "Open 3D model"
-msgstr "Abrir modelo 3D"
-
-#: Cura/gui/sceneView.py:229
-msgid "Save 3D model"
-msgstr "Guardar modelo 3d"
-
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914
-#, python-format
-msgid "Print with %s"
-msgstr "Imprimir con %s"
-
-#: Cura/gui/sceneView.py:279 Cura/gui/mainWindow.py:84
-msgid "Save GCode..."
-msgstr "Guardar GCode..."
-
-#: Cura/gui/sceneView.py:280
-msgid "Slice engine log..."
-msgstr "Log del motor de fileteado..."
-
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917
-msgid "Save toolpath"
-msgstr "Guardar trayectorias (GCode)"
-
-#: Cura/gui/sceneView.py:352
-msgid "The slicing engine reported the following"
-msgstr "El fileteado informó lo siguiente"
-
-#: Cura/gui/sceneView.py:352
-msgid "Engine log..."
-msgstr "Engine log..."
-
-#: Cura/gui/sceneView.py:491
-msgid "How many copies do you want?"
-msgstr "¿Cuántas copias lo que quieres?"
-
-#: Cura/gui/sceneView.py:491
-msgid "Number of copies"
-msgstr "Número de copias"
-
-#: Cura/gui/sceneView.py:491
-msgid "Multiply"
-msgstr "Multiplicar objeto"
-
-#: Cura/gui/sceneView.py:780
-msgid "Center on platform"
-msgstr "Centrar en la plataforma"
-
-#: Cura/gui/sceneView.py:781
-msgid "Delete object"
-msgstr "Borrar objeto"
-
-#: Cura/gui/sceneView.py:782
-msgid "Multiply object"
-msgstr "Multiplicar objeto"
-
-#: Cura/gui/sceneView.py:783
-msgid "Split object into parts"
-msgstr "Cortar objetos en partes"
-
-#: Cura/gui/sceneView.py:785
-msgid "Dual extrusion merge"
-msgstr "Fusionar extrusión dual"
-
-#: Cura/gui/sceneView.py:787
-msgid "Delete all objects"
-msgstr "Borrar todos los objetos"
-
-#: Cura/gui/sceneView.py:788
-msgid "Reload all objects"
-msgstr "Releer todos los objetos"
-
-#: Cura/gui/sceneView.py:911
-msgid "Toolpath to SD"
-msgstr "Trazadpo a SD"
-
-#: Cura/gui/sceneView.py:1205
-msgid "Overhang view not working due to lack of OpenGL shaders support."
-msgstr "Vista \"Salientes\" no funciona por falta de \"OpenGL shaders\"."
-
-#: Cura/gui/firmwareInstall.py:64
-msgid ""
-"I am sorry, but Cura does not ship with a default firmware for your machine "
-"configuration."
-msgstr ""
-"Lo siento, pero cura no viene con un firmware por defecto para la "
-"configuración de tu maquina."
-
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:565
-msgid "Firmware update"
-msgstr "Actualización firmware"
-
-#: Cura/gui/firmwareInstall.py:69
-msgid ""
-"Cura only supports firmware updates for ATMega2560 based hardware.\n"
-"So updating your RepRap with Cura might or might not work."
-msgstr ""
-"Cura sólo admite actualizaciones de firmware para el hardware basado "
-"Atmega2560.\n"
-"Así que la actualización de su RepRap con Cura podría o no podría funcionar."
-
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181
-msgid "OK"
-msgstr "Aceptar"
-
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265
-msgid "Reading firmware..."
-msgstr "Leyendo firmware..."
-
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267
-msgid "Connecting to machine..."
-msgstr "Conectando a la máquina"
-
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271
-msgid ""
-"Please connect the printer to\n"
-"your computer with the USB cable."
-msgstr ""
-"Por favor, conecte la impresora a \n"
-"su computadora con el cable USB."
-
-#: Cura/gui/firmwareInstall.py:123
-msgid ""
-"Failed to find machine for firmware upgrade\n"
-"Is your machine connected to the PC?"
-msgstr ""
-"Fallo al buscar actualización del firmware\n"
-"¿Esta tu máquina conectada al PC?"
-
-#: Cura/gui/firmwareInstall.py:130
-msgid ""
-"Failed to install firmware:\n"
-"This firmware is not compatible with this machine.\n"
-"Trying to install UMO firmware on an UM2 or UMO+?"
-msgstr ""
-"No se pudo instalar el firmware:\n"
-"Este firmware no es compatible con este equipo.\n"
-"¿Tratar de instalar el firmware UMO en una UM2 o UMO+?"
-
-#: Cura/gui/firmwareInstall.py:136
-msgid ""
-"Failed to install firmware:\n"
-"This firmware is not compatible with this machine.\n"
-"Trying to install UM2 or UMO+ firmware on an UMO?"
-msgstr ""
-"No se pudo instalar el firmware:\n"
-"Este firmware no es compatible con este equipo.\n"
-"¿Tratar de instalar el firmware UMO en una UM2 o UMO+?"
-
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293
-msgid "Uploading firmware..."
-msgstr "Subiendo firmware"
-
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296
-#, python-format
-msgid ""
-"Done!\n"
-"Installed firmware: %s"
-msgstr ""
-"¡Hecho!\n"
-"Firmware instalado: %s"
-
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298
-msgid "Failed to write firmware.\n"
-msgstr "Fallo al cargar firmware.\n"
-
-#: Cura/gui/firmwareInstall.py:290
-msgid "Failed to connect to programmer.\n"
-msgstr "Fallo la conexion al programador\n"
-
-#: Cura/gui/simpleMode.py:52
-msgid "Print support structure"
-msgstr "Imprimir estructura de soportes"
-
-#: Cura/gui/simpleMode.py:57
-msgid "Select a quickprint profile:"
-msgstr "Seleccion tipo de impresora:"
-
-#: Cura/gui/simpleMode.py:65
-msgid "Material:"
-msgstr "Material:"
-
-#: Cura/gui/simpleMode.py:73
-msgid "Other:"
-msgstr "Otro:"
-
-#: Cura/gui/expertConfig.py:27
-msgid "Expert config"
-msgstr "Experto"
-
-#: Cura/gui/preferencesDialog.py:14
-msgid "Preferences"
-msgstr "Preferencias"
-
-#: Cura/gui/preferencesDialog.py:28
-msgid "Print window"
-msgstr "Imprimiendo"
-
-#: Cura/gui/preferencesDialog.py:31
-msgid "Colours"
-msgstr "Colores"
-
-#: Cura/gui/preferencesDialog.py:40
-msgid "Filament settings"
-msgstr "Ajustes filamento"
-
-#: Cura/gui/preferencesDialog.py:50
-msgid "Cura settings"
-msgstr "Ajustes de Cura"
-
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84
-msgid "Machine settings"
-msgstr "Ajuste de la máquina"
-
-#: Cura/gui/preferencesDialog.py:95
-msgid "Printer head size"
-msgstr "Tamaño cabezal de impresión"
-
-#: Cura/gui/preferencesDialog.py:103
-#, python-format
-msgid "Extruder %d"
-msgstr "Extrusor %d"
-
-#: Cura/gui/preferencesDialog.py:107
-msgid "Communication settings"
-msgstr "Ajustes comunicación"
-
-#: Cura/gui/preferencesDialog.py:119
-msgid "Ok"
-msgstr "Aceptar"
-
-#: Cura/gui/preferencesDialog.py:123
-msgid "Add new machine"
-msgstr "Añadir nueva máquina"
-
-#: Cura/gui/preferencesDialog.py:127
-msgid "Remove machine"
-msgstr "Selecciona tu maquina"
-
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167
-msgid "Change machine name"
-msgstr "Cambiar el nombre"
-
-#: Cura/gui/preferencesDialog.py:153
-msgid "Cannot remove the last machine configuration in Cura"
-msgstr "No se puede borrar la ultima configuración de la máquina"
-
-#: Cura/gui/preferencesDialog.py:153
-msgid "Machine remove error"
-msgstr "Quitar errores de la máquina"
-
-#: Cura/gui/preferencesDialog.py:167
-msgid "Enter the new name:"
-msgstr "Nuevo nombre:"
-
-#: Cura/gui/mainWindow.py:72
-msgid "Load model file...\tCTRL+L"
-msgstr "Cargar modelo...\tCTRL+L"
-
-#: Cura/gui/mainWindow.py:74
-msgid "Save model...\tCTRL+S"
-msgstr "Guardar modelo...\tCTRL+S"
-
-#: Cura/gui/mainWindow.py:76
-msgid "Reload platform\tF5"
-msgstr "Limpiar plataforma\tF5"
-
-#: Cura/gui/mainWindow.py:78
-msgid "Clear platform"
-msgstr "Limpiar plataforma"
-
-#: Cura/gui/mainWindow.py:82
-msgid "Print...\tCTRL+P"
-msgstr "Imprimir...\tCTRL+P"
-
-#: Cura/gui/mainWindow.py:86
-msgid "Show slice engine log..."
-msgstr "Mostrar log de fileteado"
-
-#: Cura/gui/mainWindow.py:90
-msgid "Open Profile..."
-msgstr "Abrir Perfil..."
-
-#: Cura/gui/mainWindow.py:93
-msgid "Save Profile..."
-msgstr "Guardar Perfil..."
-
-#: Cura/gui/mainWindow.py:100
-msgid "Load Profile from GCode..."
-msgstr "Leer Perfil desde GCode"
-
-#: Cura/gui/mainWindow.py:104
-msgid "Reset Profile to default"
-msgstr "Reiniciar Perfil por defecto"
-
-#: Cura/gui/mainWindow.py:109
-msgid "Preferences...\tCTRL+,"
-msgstr "Preferencias...\tCTRL+,"
-
-#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:473
-msgid "Machine settings..."
-msgstr "Ajuste de la máquina..."
-
-#: Cura/gui/mainWindow.py:117
-msgid "Recent Model Files"
-msgstr "Modelos Recientes"
-
-#: Cura/gui/mainWindow.py:124
-msgid "Recent Profile Files"
-msgstr "Perfiles Recientes"
-
-#: Cura/gui/mainWindow.py:130
-msgid "Quit"
-msgstr "Salir"
-
-#: Cura/gui/mainWindow.py:132
-msgid "File"
-msgstr "Archivo"
-
-#: Cura/gui/mainWindow.py:140
-msgid "Minecraft map import..."
-msgstr "Importar mapa de Minecraft..."
-
-#: Cura/gui/mainWindow.py:144
-msgid "PID Debugger..."
-msgstr "PID Debugger..."
-
-#: Cura/gui/mainWindow.py:146
-msgid "Auto Firmware Update..."
-msgstr "Actualización firmware..."
-
-#: Cura/gui/mainWindow.py:149
-msgid "Copy profile to clipboard"
-msgstr "Copiar perfil al portapapeles"
-
-#: Cura/gui/mainWindow.py:153
-msgid "Print all at once"
-msgstr "Imprimir todas a la vez"
-
-#: Cura/gui/mainWindow.py:155
-msgid "Print one at a time"
-msgstr "Imprimir una por una"
-
-#: Cura/gui/mainWindow.py:162
-msgid "Tools"
-msgstr "Herramientas"
-
-#: Cura/gui/mainWindow.py:171
-msgid "Switch to quickprint..."
-msgstr "Cambiar a ajustes rapidos..."
-
-#: Cura/gui/mainWindow.py:175
-msgid "Switch to full settings..."
-msgstr "Cambiar a ajustes completos..."
-
-#: Cura/gui/mainWindow.py:180
-msgid "Open expert settings...\tCTRL+E"
-msgstr "Abrir ajustes experto...\tCTRL+E"
-
-#: Cura/gui/mainWindow.py:184
-msgid "Run bed leveling wizard..."
-msgstr "Iniciar asistente para calibración de la cama..."
-
-#: Cura/gui/mainWindow.py:186
-msgid "Run head offset wizard..."
-msgstr "Iniciar asistente de distancia entre extrusores..."
-
-#: Cura/gui/mainWindow.py:189
-msgid "Expert"
-msgstr "Experto"
-
-#: Cura/gui/mainWindow.py:192
-msgid "Online documentation..."
-msgstr "Documentación en la red..."
-
-#: Cura/gui/mainWindow.py:194
-msgid "Report a problem..."
-msgstr "Reportar un problema..."
-
-#: Cura/gui/mainWindow.py:196
-msgid "Check for update..."
-msgstr "Comprobando actualizaciones..."
-
-#: Cura/gui/mainWindow.py:198
-msgid "Open YouMagine website..."
-msgstr "Abre tu página YouMagine"
-
-#: Cura/gui/mainWindow.py:200
-msgid "About Cura..."
-msgstr "Sobra Cura..."
-
-#: Cura/gui/mainWindow.py:202
-msgid "Help"
-msgstr "Ayuda"
-
-#: Cura/gui/mainWindow.py:383
-msgid ""
-"For \"One at a time\" printing, you need to have entered the correct head "
-"size and gantry height in the machine settings"
-msgstr ""
-" Para \"Uno a la vez\" imprimir, tiene que haber entrado en la cabeza "
-"correcta tamaño y puente de altura en la configuración del equipo "
-
-#: Cura/gui/mainWindow.py:383
-msgid "One at a time warning"
-msgstr "Advertencia de uno por vez"
-
-#: Cura/gui/mainWindow.py:471
-msgid "Add new machine..."
-msgstr "Añadir nueva máquina..."
-
-#: Cura/gui/mainWindow.py:479
-msgid "Install default firmware..."
-msgstr "Instalar el firmware por defecto..."
-
-#: Cura/gui/mainWindow.py:482
-msgid "Install custom firmware..."
-msgstr "Instalar firmware personalizado..."
-
-#: Cura/gui/mainWindow.py:486
-msgid "Select profile file to load"
-msgstr "Seleccion de perfil a cargar"
-
-#: Cura/gui/mainWindow.py:498
-msgid "Select gcode file to load profile from"
-msgstr "Selección gcode para cargar perfil desde él"
-
-#: Cura/gui/mainWindow.py:513
-msgid ""
-"No profile found in GCode file.\n"
-"This feature only works with GCode files made by Cura 12.07 or newer."
-msgstr ""
-"No se ha encontrado Perfil en el GCode.\n"
-"Esta caracteristicas solo funciona en versiones de Cura 12.07 o superior."
-
-#: Cura/gui/mainWindow.py:513
-msgid "Profile load error"
-msgstr "Carga de Perfil erronea"
-
-#: Cura/gui/mainWindow.py:517 Cura/gui/mainWindow.py:527
-msgid "Select profile file to save"
-msgstr "Seleccion perfil para guardar"
-
-#: Cura/gui/mainWindow.py:537
-msgid ""
-"This will reset all profile settings to defaults.\n"
-"Unless you have saved your current profile, all settings will be lost!\n"
-"Do you really want to reset?"
-msgstr ""
-"Esto restablecerá todos los ajustes de perfil a los valores "
-"predeterminados.\n"
-"A menos que usted ha grabado su perfil actual, todos los ajustes se "
-"perderán!\n"
-"¿Realmente desea reiniciar?"
-
-#: Cura/gui/mainWindow.py:537
-msgid "Profile reset"
-msgstr "Reiniciar Perfil"
-
-#: Cura/gui/mainWindow.py:550
-msgid ""
-"Copy the settings from quickprint to your full settings?\n"
-"(This will overwrite any full setting modifications you have)"
-msgstr ""
-"Copiar los ajustes de QuickPrint a sus ajustes completos ?\n"
-"(Esto sobrescribirá cualquier modificación de ajuste completo que tienes)"
-
-#: Cura/gui/mainWindow.py:550
-msgid "Profile copy"
-msgstr "Copar perfil"
-
-#: Cura/gui/mainWindow.py:565
-msgid ""
-"Warning: Installing a custom firmware does not guarantee that you machine "
-"will function correctly, and could damage your machine."
-msgstr ""
-"Advertencia: Instalando un firmware personalizado no garantizamos el "
-"correcto funcionamiento de la impresora y se podría dañar"
-
-#: Cura/gui/mainWindow.py:566 Cura/gui/mainWindow.py:609
-msgid "Open firmware to upload"
-msgstr "Abrir firmware para cargar"
-
-#: Cura/gui/mainWindow.py:638
-msgid "You are running the latest version of Cura!"
-msgstr "Estas usando la última versión de Cura!"
-
-#: Cura/gui/mainWindow.py:638
-msgid "Awesome!"
-msgstr "¡Impresionante!"
-
-#: Cura/gui/mainWindow.py:683
-msgid "Basic"
-msgstr "Basico"
-
-#: Cura/gui/mainWindow.py:687
-msgid "Advanced"
-msgstr "Avanzado"
-
-#: Cura/gui/mainWindow.py:693
-msgid "Plugins"
-msgstr "Complementos"
-
-#~ msgid "High quality print"
-#~ msgstr "Impresión Alta calidad"
-
-#~ msgid "Normal quality print"
-#~ msgstr "Calidad de impresión Normal"
-
-#~ msgid "Fast low quality print"
-#~ msgstr "Rapido impresión baja calidad"
-
-#~ msgid "Thin walled cup or vase"
-#~ msgstr "Pared fina tipo taza o vaso"
-
-#~ msgid "Diameter:"
-#~ msgstr "Diametro:"
-
-#~ msgid "Exterior Only"
-#~ msgstr "Exterior solamente"
-
-#~ msgid "Edit"
-#~ msgstr "Editar"
-
-#~ msgid "Rectangle"
-#~ msgstr "Rectangulo"
-
-#~ msgid "Circle"
-#~ msgstr "Circulo"
-
-#~ msgid "Draw curves"
-#~ msgstr "Dibujar curvas"
-
-#~ msgid "Run first run wizard..."
-#~ msgstr "Iniciar asistente inicial..."
-
-#~ msgid "* Configure Cura for your machine"
-#~ msgstr "Configura Cura para tu máquina"
-
-#~ msgid "* Optionally upgrade your firmware"
-#~ msgstr "Opcionalmente actualiza tu firmware"
-
-#~ msgid "* Optionally check if your machine is working safely"
-#~ msgstr "Opcionalmente márcalo si tu máquina trabaja bien"
-
-#~ msgid "* Optionally level your printer bed"
-#~ msgstr "Opcionalmente nivela tu cama caliente"
-
-#~ msgid "Statistics"
-#~ msgstr "Estadisticas"
-
-#~ msgid ""
-#~ "Filament: ####.##m #.##g\n"
-#~ "Estimated print time: #####:##\n"
-#~ "Machine state:\n"
-#~ "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
-#~ msgstr ""
-#~ "Filamento: ####.##m #.##g\n"
-#~ "Tiempo estimado de impresión: #####:##\n"
-#~ "Estado máquina:\n"
-#~ "Detectando velocidadXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
-
-#~ msgid "BedTemp:"
-#~ msgstr "Temp CamaCaliente"
-
-#~ msgid "Temp:"
-#~ msgstr "Temperatura:"
-
-#~ msgid "Jog"
-#~ msgstr "Jog"
-
-#~ msgid "Outer wall:"
-#~ msgstr "Capa exterior:"
-
-#~ msgid "Inner wall:"
-#~ msgstr "Capa interior:"
-
-#~ msgid "Fill:"
-#~ msgstr "Relleno:"
-
-#~ msgid "Support:"
-#~ msgstr "Soportes:"
-
-#~ msgid "Term"
-#~ msgstr "Terminal"
-
-#~ msgid "Enable timelapse movie recording"
-#~ msgstr "Habilitar grabación de timelapse"
-
-#~ msgid "Show preview"
-#~ msgstr "Mostrar previo"
-
-#~ msgid "Camera"
-#~ msgstr "Camara"
-
-#~ msgid "Loading gcode...\n"
-#~ msgstr "Cargar gcode...\n"
-
-#~ msgid "Filament: %(amount).2fm %(weight).2fg\n"
-#~ msgstr "Filamento: %(amount).2fm %(weight).2fg\n"
-
-#~ msgid "Filament cost: %s\n"
-#~ msgstr "Coste Filamento: %s\n"
-
-#~ msgid "Cura - Batch run"
-#~ msgstr "Cura - Procesando lote"
-
-#~ msgid "Add"
-#~ msgstr "Añadir"
-
-#~ msgid "Remove"
-#~ msgstr "Remover"
-
-#~ msgid "Prepare all"
-#~ msgstr "Preparar todo"
-
-#~ msgid "Open file to batch prepare"
-#~ msgstr "Abrir fichero para preparar lote"
-
-#~ msgid "Building: %d "
-#~ msgstr "Construyendo: %d "
-
-#~ msgid "Done: 0/%d "
-#~ msgstr "Hecho: 0/%d "
-
-#~ msgid "Abort"
-#~ msgstr "Abortar"
-
-#~ msgid "Close"
-#~ msgstr "Cerrar"
-
-#~ msgid ""
-#~ "\n"
-#~ "Slicing took: %(hours)02d:%(minutes)02d"
-#~ msgstr ""
-#~ "\n"
-#~ "Fileteado tardó: %(hours)02d:%(minutes)02d"
-
-#~ msgid "Building: [%(index)d/%(size)d]"
-#~ msgstr "Construyendo: [%(index)d/%(size)d]"
-
-#~ msgid "Aborted by user."
-#~ msgstr "Abortado por el usuario"
-
-#~ msgid "Done %(index)d/%(size)d"
-#~ msgstr "Hecho %(index)d/%(size)d"
-
-#~ msgid "To SDCard"
-#~ msgstr "A SDCard"
-
-#~ msgid "Fan on layer number"
-#~ msgstr "Ventilador a partir de capa"
+# SOME DESCRIPTIVE TITLE.\r
+# Copyright (C) 2013\r
+# This file is distributed under the same license as the Cura package.\r
+# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.\r
+#\r
+msgid ""\r
+msgstr ""\r
+"Project-Id-Version: Cura\n"\r
+"Report-Msgid-Bugs-To: \n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
+"PO-Revision-Date: 2015-01-06 16:05-0300\n"\r
+"Last-Translator: Ernesto Bazzano <bazza@riseup.net>\n"\r
+"Language-Team: LANGUAGE <LL@li.org>\n"\r
+"MIME-Version: 1.0\n"\r
+"Content-Type: text/plain; charset=UTF-8\n"\r
+"Content-Transfer-Encoding: 8bit\n"\r
+"Language: es\n"\r
+"X-Generator: Poedit 1.5.4\n"\r
+\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
+msgid "A new version of Cura is available, would you like to download?"\r
+msgstr "Una nueva versión de Cura esta disponible, ¿quieres descargarla?"\r
+\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
+msgid "New version available"\r
+msgstr "Nueva versión disponible"\r
+\r
+#: Cura/gui/configWizard.py:231\r
+msgid "Add new machine wizard"\r
+msgstr "Asistente para nueva máquina"\r
+\r
+#: Cura/gui/configWizard.py:233\r
+msgid "First time run wizard"\r
+msgstr "Hacer asistencia inicial"\r
+\r
+#: Cura/gui/configWizard.py:234\r
+msgid "Welcome, and thanks for trying Cura!"\r
+msgstr "Bienvenido, y gracias por ¡usar Cura!"\r
+\r
+#: Cura/gui/configWizard.py:236\r
+msgid "This wizard will help you in setting up Cura for your machine."\r
+msgstr "Este asistente le ayudará en la creación de Cura para su máquina."\r
+\r
+#: Cura/gui/configWizard.py:239\r
+msgid "Select your language:"\r
+msgstr "Selecciona tu lenguaje:"\r
+\r
+#: Cura/gui/configWizard.py:266\r
+msgid "Older models"\r
+msgstr "Modelos antiguos"\r
+\r
+#: Cura/gui/configWizard.py:283\r
+msgid "Printrbot Selection"\r
+msgstr "Selección printrbot"\r
+\r
+#: Cura/gui/configWizard.py:285\r
+msgid "Select which Printrbot machine you have:"\r
+msgstr "Seleccione que Printrbot máquina tiene"\r
+\r
+#: Cura/gui/configWizard.py:349\r
+msgid "Other machine information"\r
+msgstr "Otra información de la máquina"\r
+\r
+#: Cura/gui/configWizard.py:350\r
+msgid "The following pre-defined machine profiles are available"\r
+msgstr "Los siguientes perfiles de máquina predefinidos están disponibles"\r
+\r
+#: Cura/gui/configWizard.py:351\r
+msgid ""\r
+"Note that these profiles are not guaranteed to give good results,\n"\r
+"or work at all. Extra tweaks might be required.\n"\r
+"If you find issues with the predefined profiles,\n"\r
+"or want an extra profile.\n"\r
+"Please report it at the github issue tracker."\r
+msgstr ""\r
+"Tenga en cuenta que estos perfiles no están garantizados para dar buenos "\r
+"resultados,\n"\r
+"o el trabajo en absoluto. podría ser necesario retoques adicionales.\n"\r
+" Si usted encuentra problemas con los perfiles predefinidos,\n"\r
+"o quieren un perfil extra. \n"\r
+"Por favor repórtelo a la de seguimiento de incidencias github."\r
+\r
+#: Cura/gui/configWizard.py:362\r
+msgid "Custom..."\r
+msgstr "Personalizable..."\r
+\r
+#: Cura/gui/configWizard.py:380\r
+msgid "Cura Ready!"\r
+msgstr "¡Cura listo!"\r
+\r
+#: Cura/gui/configWizard.py:381\r
+msgid "Cura is now ready to be used!"\r
+msgstr "¡Cura esta listo para su uso!"\r
+\r
+#: Cura/gui/configWizard.py:385\r
+msgid "Custom RepRap information"\r
+msgstr "Personalizar la información"\r
+\r
+#: Cura/gui/configWizard.py:386\r
+msgid ""\r
+"RepRap machines can be vastly different, so here you can set your own "\r
+"settings."\r
+msgstr ""\r
+"Máquinas RepRap pueden ser muy diferentes, por lo que aquí se puede "\r
+"establecer su propio ajustes."\r
+\r
+#: Cura/gui/configWizard.py:387\r
+msgid ""\r
+"Be sure to review the default profile before running it on your machine."\r
+msgstr ""\r
+"Asegúrese de revisar el perfil predeterminado antes de ejecutarlo en su "\r
+"máquina."\r
+\r
+#: Cura/gui/configWizard.py:388\r
+msgid ""\r
+"If you like a default profile for your machine added,\n"\r
+"then make an issue on github."\r
+msgstr ""\r
+"Si quieres añadir un perfil por defecto para tu máquina,\n"\r
+"crea un requerimiento en el github."\r
+\r
+#: Cura/gui/configWizard.py:390\r
+msgid "You will have to manually install Marlin or Sprinter firmware."\r
+msgstr "Tendrás que instalar manual Marlin o Sprinter"\r
+\r
+#: Cura/gui/configWizard.py:392\r
+msgid "Machine name"\r
+msgstr "Nombre de la máquina"\r
+\r
+#: Cura/gui/configWizard.py:393\r
+msgid "Machine width (mm)"\r
+msgstr "Anchura máquina (mm)"\r
+\r
+#: Cura/gui/configWizard.py:394\r
+msgid "Machine depth (mm)"\r
+msgstr "Produndidad máquina (mm)"\r
+\r
+#: Cura/gui/configWizard.py:395\r
+msgid "Machine height (mm)"\r
+msgstr "Altura máquina (mm)"\r
+\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
+msgid "Nozzle size (mm)"\r
+msgstr "Tamaño boquilla (mm)"\r
+\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
+msgid "Heated bed"\r
+msgstr "Cama caliente"\r
+\r
+#: Cura/gui/configWizard.py:398\r
+msgid "Bed center is 0,0,0 (RoStock)"\r
+msgstr "Centro de la base en 0,0,0 (Rostock)"\r
+\r
+#: Cura/gui/configWizard.py:418\r
+msgid "Select your machine"\r
+msgstr "Selecciona tu maquina"\r
+\r
+#: Cura/gui/configWizard.py:419\r
+msgid "What kind of machine do you have:"\r
+msgstr "Que tipo de máquina tienes:"\r
+\r
+#: Cura/gui/configWizard.py:438\r
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
+msgstr "Otras (ej. RepRap, witbox, etc)"\r
+\r
+#: Cura/gui/configWizard.py:441\r
+msgid ""\r
+"The collection of anonymous usage information helps with the continued "\r
+"improvement of Cura."\r
+msgstr "La recolección de datos de utilización anónima ayuda a mejorar Cura."\r
+\r
+#: Cura/gui/configWizard.py:442\r
+msgid ""\r
+"This does NOT submit your models online nor gathers any privacy related "\r
+"information."\r
+msgstr ""\r
+"Esta hace que NO envie sus modelos online ni recopila datos relacionados con "\r
+"su privacidad."\r
+\r
+#: Cura/gui/configWizard.py:443\r
+msgid "Submit anonymous usage information:"\r
+msgstr "Enviar información de uso anónima:"\r
+\r
+#: Cura/gui/configWizard.py:444\r
+msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
+msgstr "Para más detalles: http://wiki.ultimaker.com/Cura:stats"\r
+\r
+#: Cura/gui/configWizard.py:576\r
+msgid "Select upgraded parts you have"\r
+msgstr "Selecciona mejoras que tienes"\r
+\r
+#: Cura/gui/configWizard.py:577\r
+msgid ""\r
+"To assist you in having better default settings for your Ultimaker\n"\r
+"Cura would like to know which upgrades you have in your machine."\r
+msgstr ""\r
+"Para ayudarle a tener mejores ajustes predeterminados para su Ultimaker \n"\r
+"Cura necesitaría saber qué actualizaciones que tiene en su máquina."\r
+\r
+#: Cura/gui/configWizard.py:579\r
+msgid "Extruder drive upgrade"\r
+msgstr "Mejora extrusor"\r
+\r
+#: Cura/gui/configWizard.py:580\r
+msgid "Heated printer bed (kit)"\r
+msgstr "Cama caliente (kit)"\r
+\r
+#: Cura/gui/configWizard.py:581\r
+msgid "Heated printer bed (self built)"\r
+msgstr "Cama caliente (autoconstruida)"\r
+\r
+#: Cura/gui/configWizard.py:582\r
+msgid "Dual extrusion (experimental)"\r
+msgstr "Extrusion doble (experimental)"\r
+\r
+#: Cura/gui/configWizard.py:584\r
+msgid ""\r
+"If you have an Ultimaker bought after october 2012 you will have the\n"\r
+"Extruder drive upgrade. If you do not have this upgrade,\n"\r
+"it is highly recommended to improve reliability."\r
+msgstr ""\r
+"Si tienes una Ultimaker comprada posterior a Octubre de 2012 tu tienes\n"\r
+"la mejora en el extrusor. Si no tienes esta mejora,\n"\r
+"es recomendable para mejorar el desempeño."\r
+\r
+#: Cura/gui/configWizard.py:585\r
+msgid ""\r
+"This upgrade can be bought from the Ultimaker webshop\n"\r
+"or found on thingiverse as thing:26094"\r
+msgstr ""\r
+"Esta mejora puede comprarse en la webshop de Ultimaker\n"\r
+"o encontrarse en thingiverse thing:26094"\r
+\r
+#: Cura/gui/configWizard.py:607\r
+msgid "Upgrade Ultimaker Firmware"\r
+msgstr "Actuliza Firmware Ultimaker"\r
+\r
+#: Cura/gui/configWizard.py:608\r
+msgid ""\r
+"Firmware is the piece of software running directly on your 3D printer.\n"\r
+"This firmware controls the step motors, regulates the temperature\n"\r
+"and ultimately makes your printer work."\r
+msgstr ""\r
+"Firmware es un software que se ejecuta en la propia impresora.\n"\r
+"Controla los pasos de motor, temperatura\n"\r
+"y finalmente hace que tu impresora funcione."\r
+\r
+#: Cura/gui/configWizard.py:610\r
+msgid ""\r
+"The firmware shipping with new Ultimakers works, but upgrades\n"\r
+"have been made to make better prints, and make calibration easier."\r
+msgstr ""\r
+"El firmware que trae la Ultimaker funciona, pero actualizaciones\n"\r
+"hacen que se imprima y se calibre mejor."\r
+\r
+#: Cura/gui/configWizard.py:612\r
+msgid ""\r
+"Cura requires these new features and thus\n"\r
+"your firmware will most likely need to be upgraded.\n"\r
+"You will get the chance to do so now."\r
+msgstr ""\r
+"Cura requiere estas nuevas características y por lo tanto\n"\r
+"el firmware es necesario que tenga que ser actualizado. \n"\r
+"Usted tendrá la oportunidad de hacerlo ahora."\r
+\r
+#: Cura/gui/configWizard.py:618\r
+msgid "Do not upgrade to this firmware if:"\r
+msgstr "No actualices a este firmware si:"\r
+\r
+#: Cura/gui/configWizard.py:619\r
+msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
+msgstr "* Tienes una máquina basada en el antiguo ATMega1280"\r
+\r
+#: Cura/gui/configWizard.py:620\r
+msgid "* Build your own heated bed"\r
+msgstr "* Construye tu propia cama"\r
+\r
+#: Cura/gui/configWizard.py:621\r
+msgid "* Have other changes in the firmware"\r
+msgstr "Tiene otros cambios en el firmware"\r
+\r
+#: Cura/gui/configWizard.py:641\r
+msgid "Ultimaker Checkup"\r
+msgstr "Ultimaker chequeada"\r
+\r
+#: Cura/gui/configWizard.py:655\r
+msgid ""\r
+"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
+"You can skip these if you know your machine is functional."\r
+msgstr ""\r
+"Es una buena idea hacer algunos chequeos ahora en tu Ultimaker.\n"\r
+"Puedes obviarlos si tu máquina es funcional."\r
+\r
+#: Cura/gui/configWizard.py:656\r
+msgid "Run checks"\r
+msgstr "Iniciar chequeos"\r
+\r
+#: Cura/gui/configWizard.py:656\r
+msgid "Skip checks"\r
+msgstr "Saltar comprobaciones"\r
+\r
+#: Cura/gui/configWizard.py:660\r
+msgid "Communication:"\r
+msgstr "Comunicación:"\r
+\r
+#: Cura/gui/configWizard.py:661\r
+msgid "Temperature:"\r
+msgstr "Temperatura:"\r
+\r
+#: Cura/gui/configWizard.py:662\r
+msgid "Endstops:"\r
+msgstr "Final de carrera:"\r
+\r
+#: Cura/gui/configWizard.py:667\r
+msgid "Show error log"\r
+msgstr "Mostrar log de errores"\r
+\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
+msgid "Connecting to machine."\r
+msgstr "Conectando a la maquina"\r
+\r
+#: Cura/gui/configWizard.py:722\r
+msgid "Cooldown before temperature check."\r
+msgstr "Enfriar antes de comprobar la temperatura"\r
+\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
+msgid "Checking the heater and temperature sensor."\r
+msgstr "Comprueba el extrusor y el sensor de temperatura"\r
+\r
+#: Cura/gui/configWizard.py:746\r
+msgid "Please make sure none of the endstops are pressed."\r
+msgstr "Por favor asegurate que los endstosp no estan presionados."\r
+\r
+#: Cura/gui/configWizard.py:759\r
+msgid "Temperature measurement FAILED!"\r
+msgstr "¡La Medición de temperatura a FALLADO!"\r
+\r
+#: Cura/gui/configWizard.py:764\r
+#, python-format\r
+msgid "Head temperature: %d"\r
+msgstr "Temp. cabezal %d"\r
+\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
+#, python-format\r
+msgid "Communication State: %s"\r
+msgstr "Estado de comunicación: %s"\r
+\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
+msgid "Failed to establish connection with the printer."\r
+msgstr "Fallo al establecer la conexión con la impresora"\r
+\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
+msgid "Please press the left X endstop."\r
+msgstr "Presiona el fin de carrera X izquierdo."\r
+\r
+#: Cura/gui/configWizard.py:824\r
+msgid "Please press the right X endstop."\r
+msgstr "Presiona el fin de carrera X derecho."\r
+\r
+#: Cura/gui/configWizard.py:834\r
+msgid "Please press the front Y endstop."\r
+msgstr "Presiona el fin de carrera Y delantero. "\r
+\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
+msgid "Please press the top Z endstop."\r
+msgstr "Presiona el fin de carrera Z superior. "\r
+\r
+#: Cura/gui/configWizard.py:844\r
+msgid "Please press the back Y endstop."\r
+msgstr "Presiona el fin de carrera Y trasero. "\r
+\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
+msgid "Checkup finished"\r
+msgstr "Chequeo finalizado"\r
+\r
+#: Cura/gui/configWizard.py:863\r
+msgid "Please press the bottom Z endstop."\r
+msgstr "Presiona el fin de carrera Z inferior. "\r
+\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
+msgid "Ultimaker Calibration"\r
+msgstr "Calibración de la Ultimaker"\r
+\r
+#: Cura/gui/configWizard.py:912\r
+msgid "Calibrating the Steps Per E requires some manual actions."\r
+msgstr "Calibrar los pasos del Extrusor requiere algunas acciones manuales."\r
+\r
+#: Cura/gui/configWizard.py:913\r
+msgid "First remove any filament from your machine."\r
+msgstr "Primero remover cualquier filamento de tu maquina"\r
+\r
+#: Cura/gui/configWizard.py:914\r
+msgid ""\r
+"Next put in your filament so the tip is aligned with the\n"\r
+"top of the extruder drive."\r
+msgstr ""\r
+"A continuación, pon en el filamento de manera que la punta quede alineada "\r
+"con la \n"\r
+"superior de la unidad extrusora."\r
+\r
+#: Cura/gui/configWizard.py:915\r
+msgid "We'll push the filament 100mm"\r
+msgstr "Empujaremos 100 mm de filamento"\r
+\r
+#: Cura/gui/configWizard.py:916\r
+msgid "Extrude 100mm filament"\r
+msgstr "Extruir 100mm filamento"\r
+\r
+#: Cura/gui/configWizard.py:917\r
+msgid ""\r
+"Now measure the amount of extruded filament:\n"\r
+"(this can be more or less then 100mm)"\r
+msgstr ""\r
+"Ahora mide la cantidad de filamento extruido:\n"\r
+"(debe ser mas o menos 100mm)"\r
+\r
+#: Cura/gui/configWizard.py:918\r
+msgid "Save"\r
+msgstr "Guardar"\r
+\r
+#: Cura/gui/configWizard.py:919\r
+msgid "This results in the following steps per E:"\r
+msgstr "Esto se da como resultado los siguiente pasos por E:"\r
+\r
+#: Cura/gui/configWizard.py:921\r
+msgid "You can repeat these steps to get better calibration."\r
+msgstr "Puedes repetir estos paso para conseguir una mejor calibración."\r
+\r
+#: Cura/gui/configWizard.py:924\r
+msgid ""\r
+"If you still have filament in your printer which needs\n"\r
+"heat to remove, press the heat up button below:"\r
+msgstr ""\r
+"Si aún tienes filamento en tu impresora que necesita\n"\r
+"calor para removerlo, presiona el botón de calentar debajo:"\r
+\r
+#: Cura/gui/configWizard.py:925\r
+msgid "Heatup for filament removal"\r
+msgstr "Calentar para remover filamento"\r
+\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
+msgid ""\r
+"Error: Failed to open serial port to machine\n"\r
+"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
+msgstr ""\r
+"Error: Fallo al abrir el Puerto Serie de la maquina\n"\r
+"Si sigue ocurriendo, prueba a desconectar y reconectar el cable USB"\r
+\r
+#: Cura/gui/configWizard.py:1024\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1025\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr "Felicidades por la compra de su nueva Ultimaker2."\r
+\r
+#: Cura/gui/configWizard.py:1026\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura ya está listo para ser usado con su Ultimaker2."\r
+\r
+#: Cura/gui/configWizard.py:1031\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1032\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura esta ahora autorizado para compartir en YouMagine"\r
+\r
+#: Cura/gui/configWizard.py:1037\r
+msgid "Configuration Wizard"\r
+msgstr "Guía de configuración"\r
+\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
+msgid "Bed leveling wizard"\r
+msgstr "Nivelación de la cama"\r
+\r
+#: Cura/gui/configWizard.py:1100\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Este asistente le ayudará a nivelar la cama de la impresora"\r
+\r
+#: Cura/gui/configWizard.py:1102\r
+msgid "It will do the following steps"\r
+msgstr "Lo hará los siguientes pasos"\r
+\r
+#: Cura/gui/configWizard.py:1103\r
+msgid "* Move the printer head to each corner"\r
+msgstr "* Mueva el cabezal a cada esquina"\r
+\r
+#: Cura/gui/configWizard.py:1104\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr " y le permiten ajustar la altura de la cama a la boquilla"\r
+\r
+#: Cura/gui/configWizard.py:1105\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr "* Imprimir una línea alrededor de la cama para chequear el nivel"\r
+\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
+msgid "Connect to printer"\r
+msgstr "Conectando a la maquina"\r
+\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
+msgid "Resume"\r
+msgstr "Continuar"\r
+\r
+#: Cura/gui/configWizard.py:1113\r
+msgid "Up 0.2mm"\r
+msgstr "Arriba 0,2mm"\r
+\r
+#: Cura/gui/configWizard.py:1113\r
+msgid "Down 0.2mm"\r
+msgstr "Abajo 0,2mm"\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Up 10mm"\r
+msgstr "Arriba 10mm"\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Down 10mm"\r
+msgstr "Abajo 10mm"\r
+\r
+#: Cura/gui/configWizard.py:1174\r
+msgid "Homing printer..."\r
+msgstr "Punto de inicio..."\r
+\r
+#: Cura/gui/configWizard.py:1184\r
+msgid "Moving head to back center..."\r
+msgstr "Moviendo la cabeza a centro posterior..."\r
+\r
+#: Cura/gui/configWizard.py:1191\r
+msgid "Moving head to back left corner..."\r
+msgstr "Moviendo la cabeza hacia atrás esquina izquierda..."\r
+\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
+msgid "Moving head to front right corner..."\r
+msgstr "Moviendo la cabeza hacia atrás esquina derecha..."\r
+\r
+#: Cura/gui/configWizard.py:1206\r
+msgid "Moving head to back right corner..."\r
+msgstr "Moviendo la cabeza hacia atrás esquina atras a la derecha..."\r
+\r
+#: Cura/gui/configWizard.py:1220\r
+msgid "Heating up printer..."\r
+msgstr "Calentar impresora..."\r
+\r
+#: Cura/gui/configWizard.py:1227\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr "Impresión de una cuadrado en la cama impresora en 0,3mm de altura."\r
+\r
+#: Cura/gui/configWizard.py:1267\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+"Ajuste el tornillo delantero izquierdo de su cama impresora \n"\r
+"De modo que la boquilla sólo golpea la cama."\r
+\r
+#: Cura/gui/configWizard.py:1272\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+"Ajuste el tornillo de atrás de su cama impresora \n"\r
+"De modo que boquilla sólo golpea la cama."\r
+\r
+#: Cura/gui/configWizard.py:1274\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+"Ajustar la izquierda el tornillo posterior de la impresora cama \n"\r
+"De modo que boquilla sólo golpea la cama."\r
+\r
+#: Cura/gui/configWizard.py:1278\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+"Ajustar el tornillo posterior derecha de la impresora cama \n"\r
+"De modo que la boquilla sólo golpea la cama."\r
+\r
+#: Cura/gui/configWizard.py:1282\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+"Ajuste el tornillo frontal derecha de la impresora cama \n"\r
+"De modo que la boquilla sólo golpea la cama."\r
+\r
+#: Cura/gui/configWizard.py:1286\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr "El calentamiento de la impresora: %d/%d"\r
+\r
+#: Cura/gui/configWizard.py:1288\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+" La impresora está caliente ahora. Por favor, inserte algunos filamentos PLA "\r
+"en la impresora."\r
+\r
+#: Cura/gui/configWizard.py:1297\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+"Utilice los botones arriba/abajo hasta que mover la cama y ajustar su Z tope "\r
+"final."\r
+\r
+#: Cura/gui/configWizard.py:1309\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+"Calibración terminada.\n"\r
+"El cuadrado en la cama deben tocar ligeramente el uno al otro."\r
+\r
+#: Cura/gui/configWizard.py:1330\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr ""\r
+"Este asistente le ayudará en la calibración de los desplazamientos de la "\r
+"cabeza impresora de la máquina de extrusión de doble"\r
+\r
+#: Cura/gui/configWizard.py:1363\r
+msgid "Printing initial calibration cross"\r
+msgstr "Impresión de la cruz de calibración inicial"\r
+\r
+#: Cura/gui/configWizard.py:1411\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+"Por favor, mida la distancia entre las líneas horizontales en milímetros."\r
+\r
+#: Cura/gui/configWizard.py:1421\r
+msgid "Printing the fine calibration lines."\r
+msgstr "Impresión de las líneas de calibración fina."\r
+\r
+#: Cura/gui/configWizard.py:1476\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+"¿Qué número de línea horizontal establece perfecta en la parte superior de "\r
+"uno al otro? Frente más línea es cero."\r
+\r
+#: Cura/gui/configWizard.py:1487\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr "Calibración terminada. Las compensaciones son: %s %s"\r
+\r
+#: Cura/gui/configWizard.py:1500\r
+msgid "Please load both extruders with PLA."\r
+msgstr "Por favor cargar ambos extrusoras con PLA."\r
+\r
+#: Cura/gui/configWizard.py:1509\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr "Posición de inicio y calentar ambos extrusoras."\r
+\r
+#: Cura/gui/configWizard.py:1519\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+"Por favor, mida la distancia entre las líneas verticales en milímetros."\r
+\r
+#: Cura/gui/configWizard.py:1526\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+"¿Qué número línea vertical establece perfecta en la parte superior de uno al "\r
+"otro? Línea de más a la izquierda es cero."\r
+\r
+#: Cura/gui/configWizard.py:1575\r
+msgid "Head offset wizard"\r
+msgstr "Asistente compensación del cabezal"\r
+\r
+#: Cura/gui/expertConfig.py:27\r
+msgid "Expert config"\r
+msgstr "Experto"\r
+\r
+#: Cura/gui/firmwareInstall.py:71\r
+msgid ""\r
+"I am sorry, but Cura does not ship with a default firmware for your machine "\r
+"configuration."\r
+msgstr ""\r
+"Lo siento, pero cura no viene con un firmware por defecto para la "\r
+"configuración de tu maquina."\r
+\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
+msgid "Firmware update"\r
+msgstr "Actualización firmware"\r
+\r
+#: Cura/gui/firmwareInstall.py:76\r
+msgid ""\r
+"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
+"So updating your RepRap with Cura might or might not work."\r
+msgstr ""\r
+"Cura sólo admite actualizaciones de firmware para el hardware basado "\r
+"Atmega2560.\n"\r
+"Así que la actualización de su RepRap con Cura podría o no podría funcionar."\r
+\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
+msgid "OK"\r
+msgstr "Aceptar"\r
+\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
+msgid "Reading firmware..."\r
+msgstr "Leyendo firmware..."\r
+\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
+msgid "Connecting to machine..."\r
+msgstr "Conectando a la máquina"\r
+\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
+msgid ""\r
+"Please connect the printer to\n"\r
+"your computer with the USB cable."\r
+msgstr ""\r
+"Por favor, conecte la impresora a \n"\r
+"su computadora con el cable USB."\r
+\r
+#: Cura/gui/firmwareInstall.py:130\r
+msgid ""\r
+"Failed to find machine for firmware upgrade\n"\r
+"Is your machine connected to the PC?"\r
+msgstr ""\r
+"Fallo al buscar actualización del firmware\n"\r
+"¿Esta tu máquina conectada al PC?"\r
+\r
+#: Cura/gui/firmwareInstall.py:137\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+"No se pudo instalar el firmware:\n"\r
+"Este firmware no es compatible con este equipo.\n"\r
+"¿Tratar de instalar el firmware UMO en una UM2 o UMO+?"\r
+\r
+#: Cura/gui/firmwareInstall.py:143\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+"No se pudo instalar el firmware:\n"\r
+"Este firmware no es compatible con este equipo.\n"\r
+"¿Tratar de instalar el firmware UMO en una UM2 o UMO+?"\r
+\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
+msgid "Uploading firmware..."\r
+msgstr "Subiendo firmware"\r
+\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
+#, python-format\r
+msgid ""\r
+"Done!\n"\r
+"Installed firmware: %s"\r
+msgstr ""\r
+"¡Hecho!\n"\r
+"Firmware instalado: %s"\r
+\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
+msgid "Failed to write firmware.\n"\r
+msgstr "Fallo al cargar firmware.\n"\r
+\r
+#: Cura/gui/firmwareInstall.py:297\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Fallo la conexion al programador\n"\r
+\r
+#: Cura/gui/mainWindow.py:72\r
+msgid "Load model file...\tCTRL+L"\r
+msgstr "Cargar modelo...\tCTRL+L"\r
+\r
+#: Cura/gui/mainWindow.py:74\r
+msgid "Save model...\tCTRL+S"\r
+msgstr "Guardar modelo...\tCTRL+S"\r
+\r
+#: Cura/gui/mainWindow.py:76\r
+msgid "Reload platform\tF5"\r
+msgstr "Limpiar plataforma\tF5"\r
+\r
+#: Cura/gui/mainWindow.py:78\r
+msgid "Clear platform"\r
+msgstr "Limpiar plataforma"\r
+\r
+#: Cura/gui/mainWindow.py:82\r
+msgid "Print...\tCTRL+P"\r
+msgstr "Imprimir...\tCTRL+P"\r
+\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
+msgid "Save GCode..."\r
+msgstr "Guardar GCode..."\r
+\r
+#: Cura/gui/mainWindow.py:86\r
+msgid "Show slice engine log..."\r
+msgstr "Mostrar log de fileteado"\r
+\r
+#: Cura/gui/mainWindow.py:90\r
+msgid "Open Profile..."\r
+msgstr "Abrir Perfil..."\r
+\r
+#: Cura/gui/mainWindow.py:93\r
+msgid "Save Profile..."\r
+msgstr "Guardar Perfil..."\r
+\r
+#: Cura/gui/mainWindow.py:100\r
+msgid "Load Profile from GCode..."\r
+msgstr "Leer Perfil desde GCode"\r
+\r
+#: Cura/gui/mainWindow.py:104\r
+msgid "Reset Profile to default"\r
+msgstr "Reiniciar Perfil por defecto"\r
+\r
+#: Cura/gui/mainWindow.py:109\r
+msgid "Preferences...\tCTRL+,"\r
+msgstr "Preferencias...\tCTRL+,"\r
+\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
+msgid "Machine settings..."\r
+msgstr "Ajuste de la máquina..."\r
+\r
+#: Cura/gui/mainWindow.py:117\r
+msgid "Recent Model Files"\r
+msgstr "Modelos Recientes"\r
+\r
+#: Cura/gui/mainWindow.py:124\r
+msgid "Recent Profile Files"\r
+msgstr "Perfiles Recientes"\r
+\r
+#: Cura/gui/mainWindow.py:130\r
+msgid "Quit"\r
+msgstr "Salir"\r
+\r
+#: Cura/gui/mainWindow.py:132\r
+msgid "File"\r
+msgstr "Archivo"\r
+\r
+#: Cura/gui/mainWindow.py:140\r
+msgid "Minecraft map import..."\r
+msgstr "Importar mapa de Minecraft..."\r
+\r
+#: Cura/gui/mainWindow.py:144\r
+msgid "PID Debugger..."\r
+msgstr "PID Debugger..."\r
+\r
+#: Cura/gui/mainWindow.py:146\r
+msgid "Auto Firmware Update..."\r
+msgstr "Actualización firmware..."\r
+\r
+#: Cura/gui/mainWindow.py:153\r
+msgid "Print all at once"\r
+msgstr "Imprimir todas a la vez"\r
+\r
+#: Cura/gui/mainWindow.py:155\r
+msgid "Print one at a time"\r
+msgstr "Imprimir una por una"\r
+\r
+#: Cura/gui/mainWindow.py:162\r
+msgid "Tools"\r
+msgstr "Herramientas"\r
+\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
+msgid "Machine"\r
+msgstr "Maquina"\r
+\r
+#: Cura/gui/mainWindow.py:171\r
+msgid "Switch to quickprint..."\r
+msgstr "Cambiar a ajustes rapidos..."\r
+\r
+#: Cura/gui/mainWindow.py:175\r
+msgid "Switch to full settings..."\r
+msgstr "Cambiar a ajustes completos..."\r
+\r
+#: Cura/gui/mainWindow.py:180\r
+msgid "Open expert settings...\tCTRL+E"\r
+msgstr "Abrir ajustes experto...\tCTRL+E"\r
+\r
+#: Cura/gui/mainWindow.py:184\r
+msgid "Run bed leveling wizard..."\r
+msgstr "Iniciar asistente para calibración de la cama..."\r
+\r
+#: Cura/gui/mainWindow.py:186\r
+msgid "Run head offset wizard..."\r
+msgstr "Iniciar asistente de distancia entre extrusores..."\r
+\r
+#: Cura/gui/mainWindow.py:189\r
+msgid "Expert"\r
+msgstr "Experto"\r
+\r
+#: Cura/gui/mainWindow.py:192\r
+msgid "Online documentation..."\r
+msgstr "Documentación en la red..."\r
+\r
+#: Cura/gui/mainWindow.py:194\r
+msgid "Report a problem..."\r
+msgstr "Reportar un problema..."\r
+\r
+#: Cura/gui/mainWindow.py:196\r
+msgid "Check for update..."\r
+msgstr "Comprobando actualizaciones..."\r
+\r
+#: Cura/gui/mainWindow.py:198\r
+msgid "Open YouMagine website..."\r
+msgstr "Abre tu página YouMagine"\r
+\r
+#: Cura/gui/mainWindow.py:200\r
+msgid "About Cura..."\r
+msgstr "Sobra Cura..."\r
+\r
+#: Cura/gui/mainWindow.py:202\r
+msgid "Help"\r
+msgstr "Ayuda"\r
+\r
+#: Cura/gui/mainWindow.py:390\r
+msgid ""\r
+"For \"One at a time\" printing, you need to have entered the correct head "\r
+"size and gantry height in the machine settings"\r
+msgstr ""\r
+" Para \"Uno a la vez\" imprimir, tiene que haber entrado en la cabeza "\r
+"correcta tamaño y puente de altura en la configuración del equipo "\r
+\r
+#: Cura/gui/mainWindow.py:390\r
+msgid "One at a time warning"\r
+msgstr "Advertencia de uno por vez"\r
+\r
+#: Cura/gui/mainWindow.py:478\r
+msgid "Add new machine..."\r
+msgstr "Añadir nueva máquina..."\r
+\r
+#: Cura/gui/mainWindow.py:486\r
+msgid "Install default firmware..."\r
+msgstr "Instalar el firmware por defecto..."\r
+\r
+#: Cura/gui/mainWindow.py:489\r
+msgid "Install custom firmware..."\r
+msgstr "Instalar firmware personalizado..."\r
+\r
+#: Cura/gui/mainWindow.py:493\r
+msgid "Select profile file to load"\r
+msgstr "Seleccion de perfil a cargar"\r
+\r
+#: Cura/gui/mainWindow.py:505\r
+msgid "Select gcode file to load profile from"\r
+msgstr "Selección gcode para cargar perfil desde él"\r
+\r
+#: Cura/gui/mainWindow.py:520\r
+msgid ""\r
+"No profile found in GCode file.\n"\r
+"This feature only works with GCode files made by Cura 12.07 or newer."\r
+msgstr ""\r
+"No se ha encontrado Perfil en el GCode.\n"\r
+"Esta caracteristicas solo funciona en versiones de Cura 12.07 o superior."\r
+\r
+#: Cura/gui/mainWindow.py:520\r
+msgid "Profile load error"\r
+msgstr "Carga de Perfil erronea"\r
+\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
+msgid "Select profile file to save"\r
+msgstr "Seleccion perfil para guardar"\r
+\r
+#: Cura/gui/mainWindow.py:544\r
+msgid ""\r
+"This will reset all profile settings to defaults.\n"\r
+"Unless you have saved your current profile, all settings will be lost!\n"\r
+"Do you really want to reset?"\r
+msgstr ""\r
+"Esto restablecerá todos los ajustes de perfil a los valores "\r
+"predeterminados.\n"\r
+"A menos que usted ha grabado su perfil actual, todos los ajustes se "\r
+"perderán!\n"\r
+"¿Realmente desea reiniciar?"\r
+\r
+#: Cura/gui/mainWindow.py:544\r
+msgid "Profile reset"\r
+msgstr "Reiniciar Perfil"\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+"Copiar los ajustes de QuickPrint a sus ajustes completos ?\n"\r
+"(Esto sobrescribirá cualquier modificación de ajuste completo que tienes)"\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid "Profile copy"\r
+msgstr "Copar perfil"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
+msgid ""\r
+"Warning: Installing a custom firmware does not guarantee that you machine "\r
+"will function correctly, and could damage your machine."\r
+msgstr ""\r
+"Advertencia: Instalando un firmware personalizado no garantizamos el "\r
+"correcto funcionamiento de la impresora y se podría dañar"\r
+\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
+msgid "Open firmware to upload"\r
+msgstr "Abrir firmware para cargar"\r
+\r
+#: Cura/gui/mainWindow.py:645\r
+msgid "You are running the latest version of Cura!"\r
+msgstr "Estas usando la última versión de Cura!"\r
+\r
+#: Cura/gui/mainWindow.py:645\r
+msgid "Awesome!"\r
+msgstr "¡Impresionante!"\r
+\r
+#: Cura/gui/mainWindow.py:690\r
+msgid "Basic"\r
+msgstr "Basico"\r
+\r
+#: Cura/gui/mainWindow.py:694\r
+msgid "Advanced"\r
+msgstr "Avanzado"\r
+\r
+#: Cura/gui/mainWindow.py:700\r
+msgid "Plugins"\r
+msgstr "Complementos"\r
+\r
+#: Cura/gui/pluginPanel.py:31\r
+msgid "Plugins:"\r
+msgstr "Complementos:"\r
+\r
+#: Cura/gui/pluginPanel.py:35\r
+msgid "Open plugin location"\r
+msgstr "Abrir localización complementos"\r
+\r
+#: Cura/gui/pluginPanel.py:36\r
+msgid "Enabled plugins"\r
+msgstr "Habilitar complementos"\r
+\r
+#: Cura/gui/pluginPanel.py:159\r
+msgid "You need to select a plugin before you can add anything."\r
+msgstr "Tienes que selecionar un complemento antes de añadir nada"\r
+\r
+#: Cura/gui/pluginPanel.py:159\r
+msgid "Error: no plugin selected"\r
+msgstr "Error: no hay complento seleccionado"\r
+\r
+#: Cura/gui/preferencesDialog.py:15\r
+msgid "Preferences"\r
+msgstr "Preferencias"\r
+\r
+#: Cura/gui/preferencesDialog.py:29\r
+msgid "Print window"\r
+msgstr "Imprimiendo"\r
+\r
+#: Cura/gui/preferencesDialog.py:32\r
+msgid "Colours"\r
+msgstr "Colores"\r
+\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
+msgid "Language"\r
+msgstr "Lenguaje"\r
+\r
+#: Cura/gui/preferencesDialog.py:41\r
+msgid "Filament settings"\r
+msgstr "Ajustes filamento"\r
+\r
+#: Cura/gui/preferencesDialog.py:58\r
+msgid "Cura settings"\r
+msgstr "Ajustes de Cura"\r
+\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
+msgid "Machine settings"\r
+msgstr "Ajuste de la máquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:124\r
+msgid "Printer head size"\r
+msgstr "Tamaño cabezal de impresión"\r
+\r
+#: Cura/gui/preferencesDialog.py:132\r
+#, python-format\r
+msgid "Extruder %d"\r
+msgstr "Extrusor %d"\r
+\r
+#: Cura/gui/preferencesDialog.py:136\r
+msgid "Communication settings"\r
+msgstr "Ajustes comunicación"\r
+\r
+#: Cura/gui/preferencesDialog.py:148\r
+msgid "Ok"\r
+msgstr "Aceptar"\r
+\r
+#: Cura/gui/preferencesDialog.py:152\r
+msgid "Add new machine"\r
+msgstr "Añadir nueva máquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:156\r
+msgid "Remove machine"\r
+msgstr "Selecciona tu maquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
+msgid "Change machine name"\r
+msgstr "Cambiar el nombre"\r
+\r
+#: Cura/gui/preferencesDialog.py:182\r
+msgid "Cannot remove the last machine configuration in Cura"\r
+msgstr "No se puede borrar la ultima configuración de la máquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:182\r
+msgid "Machine remove error"\r
+msgstr "Quitar errores de la máquina"\r
+\r
+#: Cura/gui/preferencesDialog.py:196\r
+msgid "Enter the new name:"\r
+msgstr "Nuevo nombre:"\r
+\r
+#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
+#, python-format\r
+msgid "Printing on %s"\r
+msgstr "Imprimiendo en %s"\r
+\r
+#: Cura/gui/printWindow.py:324\r
+msgid ""\r
+"Your computer is running on battery power.\n"\r
+"Connect your computer to AC power or your print might not finish."\r
+msgstr ""\r
+"Tu ordenador esta usando la bateria.\n"\r
+"Conectar tu ordenador a la corriente o tu impresión no finalizará."\r
+\r
+#: Cura/gui/printWindow.py:334\r
+msgid ""\r
+"InfoLine from printer connection\n"\r
+"InfoLine from dialog\n"\r
+"Extra line\n"\r
+"More lines for layout\n"\r
+"More lines for layout\n"\r
+"More lines for layout"\r
+msgstr ""\r
+"InfoLine de impresora conexión\n"\r
+"InfoLine de diálogo\n"\r
+"Línea extra\n"\r
+"Más líneas de distribución\n"\r
+"Más líneas de distribución\n"\r
+"Más líneas de diseño"\r
+\r
+#: Cura/gui/printWindow.py:336\r
+msgid "Connect"\r
+msgstr "Conectar"\r
+\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
+msgid "Print"\r
+msgstr "Imprimir"\r
+\r
+#: Cura/gui/printWindow.py:339\r
+msgid "Pause"\r
+msgstr "Pausar"\r
+\r
+#: Cura/gui/printWindow.py:340\r
+msgid "Cancel print"\r
+msgstr "Cancelar impresión"\r
+\r
+#: Cura/gui/printWindow.py:341\r
+msgid "Error log"\r
+msgstr "Errores"\r
+\r
+#: Cura/gui/sceneView.py:65\r
+msgid "Load"\r
+msgstr "Cargar"\r
+\r
+#: Cura/gui/sceneView.py:70\r
+msgid "Rotate"\r
+msgstr "Rotar"\r
+\r
+#: Cura/gui/sceneView.py:71\r
+msgid "Scale"\r
+msgstr "Escala"\r
+\r
+#: Cura/gui/sceneView.py:72\r
+msgid "Mirror"\r
+msgstr "Simetria"\r
+\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
+msgid "Reset"\r
+msgstr "Reiniciar"\r
+\r
+#: Cura/gui/sceneView.py:75\r
+msgid "Lay flat"\r
+msgstr "Recostar"\r
+\r
+#: Cura/gui/sceneView.py:78\r
+msgid "To max"\r
+msgstr "Al máximo"\r
+\r
+#: Cura/gui/sceneView.py:80\r
+msgid "Mirror X"\r
+msgstr "Simetria X"\r
+\r
+#: Cura/gui/sceneView.py:81\r
+msgid "Mirror Y"\r
+msgstr "Simetria Y"\r
+\r
+#: Cura/gui/sceneView.py:82\r
+msgid "Mirror Z"\r
+msgstr "Simetria Z"\r
+\r
+#: Cura/gui/sceneView.py:90\r
+msgid "Scale X"\r
+msgstr "Escala X"\r
+\r
+#: Cura/gui/sceneView.py:92\r
+msgid "Scale Y"\r
+msgstr "Escala Y"\r
+\r
+#: Cura/gui/sceneView.py:94\r
+msgid "Scale Z"\r
+msgstr "Escala Z"\r
+\r
+#: Cura/gui/sceneView.py:96\r
+msgid "Size X (mm)"\r
+msgstr "Tamaño X (mm)"\r
+\r
+#: Cura/gui/sceneView.py:98\r
+msgid "Size Y (mm)"\r
+msgstr "Tamaño Y (mm)"\r
+\r
+#: Cura/gui/sceneView.py:100\r
+msgid "Size Z (mm)"\r
+msgstr "Tamaño Z (mm)"\r
+\r
+#: Cura/gui/sceneView.py:102\r
+msgid "Uniform scale"\r
+msgstr "Escala Uniforme"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "View mode"\r
+msgstr "Modo vista"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Normal"\r
+msgstr "Normal"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Overhang"\r
+msgstr "Salientes"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Transparent"\r
+msgstr "Transparente"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "X-Ray"\r
+msgstr "Rayos X"\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Layers"\r
+msgstr "Capas"\r
+\r
+#: Cura/gui/sceneView.py:107\r
+msgid "Share on YouMagine"\r
+msgstr "Comparte en YoMagine"\r
+\r
+#: Cura/gui/sceneView.py:224\r
+msgid "Open 3D model"\r
+msgstr "Abrir modelo 3D"\r
+\r
+#: Cura/gui/sceneView.py:249\r
+msgid "Save 3D model"\r
+msgstr "Guardar modelo 3d"\r
+\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
+#, python-format\r
+msgid "Print with %s"\r
+msgstr "Imprimir con %s"\r
+\r
+#: Cura/gui/sceneView.py:313\r
+msgid "Slice engine log..."\r
+msgstr "Log del motor de fileteado..."\r
+\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
+msgid "Save toolpath"\r
+msgstr "Guardar trayectorias (GCode)"\r
+\r
+#: Cura/gui/sceneView.py:387\r
+msgid "The slicing engine reported the following"\r
+msgstr "El fileteado informó lo siguiente"\r
+\r
+#: Cura/gui/sceneView.py:387\r
+msgid "Engine log..."\r
+msgstr "Engine log..."\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "How many copies do you want?"\r
+msgstr "¿Cuántas copias lo que quieres?"\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "Number of copies"\r
+msgstr "Número de copias"\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "Multiply"\r
+msgstr "Multiplicar objeto"\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
+msgid "Center on platform"\r
+msgstr "Centrar en la plataforma"\r
+\r
+#: Cura/gui/sceneView.py:857\r
+msgid "Delete object"\r
+msgstr "Borrar objeto"\r
+\r
+#: Cura/gui/sceneView.py:858\r
+msgid "Multiply object"\r
+msgstr "Multiplicar objeto"\r
+\r
+#: Cura/gui/sceneView.py:859\r
+msgid "Split object into parts"\r
+msgstr "Cortar objetos en partes"\r
+\r
+#: Cura/gui/sceneView.py:862\r
+msgid "Dual extrusion merge"\r
+msgstr "Fusionar extrusión dual"\r
+\r
+#: Cura/gui/sceneView.py:864\r
+msgid "Delete all objects"\r
+msgstr "Borrar todos los objetos"\r
+\r
+#: Cura/gui/sceneView.py:865\r
+msgid "Reload all objects"\r
+msgstr "Releer todos los objetos"\r
+\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Borrar todos los objetos"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
+msgid "Toolpath to SD"\r
+msgstr "Trazadpo a SD"\r
+\r
+#: Cura/gui/sceneView.py:1285\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
+msgstr "Vista \"Salientes\" no funciona por falta de \"OpenGL shaders\"."\r
+\r
+#: Cura/gui/simpleMode.py:52\r
+msgid "Print support structure"\r
+msgstr "Imprimir estructura de soportes"\r
+\r
+#: Cura/gui/simpleMode.py:57\r
+msgid "Select a quickprint profile:"\r
+msgstr "Seleccion tipo de impresora:"\r
+\r
+#: Cura/gui/simpleMode.py:65\r
+msgid "Material:"\r
+msgstr "Material:"\r
+\r
+#: Cura/gui/simpleMode.py:73\r
+msgid "Other:"\r
+msgstr "Otro:"\r
+\r
+#: Cura/gui/tools/imageToMesh.py:28\r
+msgid "Height (mm)"\r
+msgstr "Espesor de capa (mm)"\r
+\r
+#: Cura/gui/tools/imageToMesh.py:32\r
+msgid "Base (mm)"\r
+msgstr "Grosor de base (mm)"\r
+\r
+#: Cura/gui/tools/imageToMesh.py:36\r
+msgid "Width (mm)"\r
+msgstr "Ancho (mm)"\r
+\r
+#: Cura/gui/tools/imageToMesh.py:40\r
+msgid "Depth (mm)"\r
+msgstr "Diametro (mm)"\r
+\r
+#: Cura/gui/tools/projector.py:42\r
+msgid "Edit"\r
+msgstr "Editar"\r
+\r
+#: Cura/gui/tools/projector.py:43\r
+msgid "Rectangle"\r
+msgstr "Rectangulo"\r
+\r
+#: Cura/gui/tools/projector.py:44\r
+msgid "Circle"\r
+msgstr "Circulo"\r
+\r
+#: Cura/gui/tools/projector.py:45\r
+msgid "Draw curves"\r
+msgstr "Dibujar curvas"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:78\r
+msgid "Checking token"\r
+msgstr "Comprobando token"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82\r
+msgid "Failed to contact YouMagine.com"\r
+msgstr "Fallo conectando con YouMagine.com"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153\r
+msgid "YouMagine error."\r
+msgstr "Error de YouMagine."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "Cura is now authorized to share on YouMagine"\r
+msgstr "Cura esta ahora autorizado para compartir en YouMagine"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "YouMagine."\r
+msgstr "YouMagine."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:112\r
+msgid "Creating new design on YouMagine..."\r
+msgstr "Creando nuevo diseño en YouMagine..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:116\r
+msgid "Failed to create a design, nothing uploaded!"\r
+msgstr "Fallo al crear el diseño, nada subido!"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:120\r
+#, python-format\r
+msgid "Building model %s..."\r
+msgstr "Construyendo modelo %s..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:131\r
+#, python-format\r
+msgid "Uploading model %s..."\r
+msgstr "Subiendo modelo %s..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148\r
+#, python-format\r
+msgid "Failed to upload %s!"\r
+msgstr "Fallo al cargar %s!"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:137\r
+#, python-format\r
+msgid "Uploading file %s..."\r
+msgstr "Subiendo archivo %s..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:145\r
+#, python-format\r
+msgid "Uploading image %s..."\r
+msgstr "Subiendo imagen %s..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:153\r
+msgid "Failed to upload snapshot!"\r
+msgstr "Fallo al cargar foto!"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:158\r
+msgid "Publishing design..."\r
+msgstr "Publicando diseño..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:230\r
+msgid "Request authorization from YouMagine"\r
+msgstr "Requerida autorización desde YouMagine"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:231\r
+msgid "Paste token here"\r
+msgstr "Pegar token aquí"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:237\r
+msgid ""\r
+"To share your designs on YouMagine\n"\r
+"you need an account on YouMagine.com\n"\r
+"and authorize Cura to access your account."\r
+msgstr ""\r
+"Para compartir tus diseños en YouMagine\n"\r
+"necesitas una cuenta en YouMagine.com\n"\r
+"y autorizar a Cura para el acceso."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:239\r
+msgid ""\r
+"This will open a browser window where you can\n"\r
+"authorize Cura to access your YouMagine account.\n"\r
+"You can revoke access at any time\n"\r
+"from YouMagine.com"\r
+msgstr ""\r
+"Esto abrirá una ventana del navegador donde se puede \n"\r
+"autorizar Cura para acceder a su cuenta YouMagine. \n"\r
+"Usted puede revocar el acceso en cualquier momento \n"\r
+"en YouMagine.com"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:274\r
+msgid "Design name"\r
+msgstr "Nombre del diseño"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:278\r
+msgid "Publish after upload"\r
+msgstr "Publicar despues de cargar"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:279\r
+msgid "Share!"\r
+msgstr "¡Comparte!"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:287\r
+msgid "Add..."\r
+msgstr "Añadir..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:289\r
+msgid "Webcam..."\r
+msgstr "Webcam..."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:299\r
+msgid ""\r
+"Directly publish the design after uploading.\n"\r
+"Without this check the design will not be public\n"\r
+"until you publish it yourself on YouMagine.com"\r
+msgstr ""\r
+"Publicar directamente el diseño despues de subir.\n"\r
+"Sin esta marca el diseño no sera publico\n"\r
+"hasta que lo hagas manualmente en YouMagine.com"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:305\r
+msgid "Design name:"\r
+msgstr "Nombre del diseño:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:307\r
+msgid "Description:"\r
+msgstr "Descripción:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:309\r
+msgid "Category:"\r
+msgstr "Categoria:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:311\r
+msgid "License:"\r
+msgstr "Licencia:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:314\r
+msgid "Images:"\r
+msgstr "Imagenes:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:317\r
+msgid "Related design files:"\r
+msgstr "Diseños relacionados:"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340\r
+msgid "The name cannot be empty"\r
+msgstr "El nombre no puede estar en blanco"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344\r
+msgid "New design error."\r
+msgstr "Error en el nuevo diseño."\r
+\r
+#: Cura/gui/tools/youmagineGui.py:344\r
+msgid "The description cannot be empty"\r
+msgstr "La descripción no puede estar vacia"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "No webcam found on your system"\r
+msgstr "No tienes webcam en tu computadora"\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "Webcam error"\r
+msgstr "Error de la webcam"\r
+\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
+#, python-format\r
+msgid "Loading toolpath for visualization (%d%%)"\r
+msgstr "Cargando trazados para visualización (%d%%)"\r
+\r
+#: Cura/gui/util/openglGui.py:242\r
+msgid "An error has occurred during the 3D view drawing."\r
+msgstr "Un error ha ocurrido durante el regenerado de la vista 3D."\r
+\r
+#: Cura/gui/util/openglGui.py:250\r
+msgid "3D window error"\r
+msgstr "Error en la ventana 3D"\r
+\r
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
+msgid "Quality"\r
+msgstr "Calidad"\r
+\r
+#: Cura/util/profile.py:178\r
+msgid "Layer height (mm)"\r
+msgstr "Espesor de la capa (mm)"\r
+\r
+#: Cura/util/profile.py:178\r
+msgid ""\r
+"Layer height in millimeters.\n"\r
+"This is the most important setting to determine the quality of your print. "\r
+"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "\r
+"0.25mm with an Ultimaker for very fast prints at low quality."\r
+msgstr ""\r
+"Espeso de capa en milimetros. \n"\r
+"Este es el ajuste más importante para definir la calidad de impresión. "\r
+"Impresiones normales usan 0.1 mm, Alta calidad 0,06 mm. Puedes incluso "\r
+"utilizar 0.25mm para impresiones muy rapidas a baja calidad en la Ultimaker."\r
+\r
+#: Cura/util/profile.py:179\r
+msgid "Shell thickness (mm)"\r
+msgstr "Espesor de la pared (mm)"\r
+\r
+#: Cura/util/profile.py:179\r
+msgid ""\r
+"Thickness of the outside shell in the horizontal direction.\n"\r
+"This is used in combination with the nozzle size to define the number\n"\r
+"of perimeter lines and the thickness of those perimeter lines."\r
+msgstr ""\r
+"Grosor de la pared exterior en la dirección horizontal. \n"\r
+"Este se utiliza en combinación con el tamaño de la boquilla para definir el "\r
+"número \n"\r
+"de líneas perimetrales y el espesor de las líneas del perímetro."\r
+\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Retracción"\r
+\r
+#: Cura/util/profile.py:180\r
+msgid "Enable retraction"\r
+msgstr "Habilitar retracción"\r
+\r
+#: Cura/util/profile.py:180\r
+msgid ""\r
+"Retract the filament when the nozzle is moving over a none-printed area. "\r
+"Details about the retraction can be configured in the advanced tab."\r
+msgstr ""\r
+"Retraer el filamento cuando el nozzle se mueva sobre un area sin impresión. "\r
+"Detalles de la retracción pueden ser configurados en la pestaña ajustes "\r
+"avanzados."\r
+\r
+#: Cura/util/profile.py:181 Cura/util/profile.py:182\r
+msgid "Fill"\r
+msgstr "Relleno"\r
+\r
+#: Cura/util/profile.py:181\r
+msgid "Bottom/Top thickness (mm)"\r
+msgstr "Espesor superior e inferior"\r
+\r
+#: Cura/util/profile.py:181\r
+msgid ""\r
+"This controls the thickness of the bottom and top layers, the amount of "\r
+"solid layers put down is calculated by the layer thickness and this value.\n"\r
+"Having this value a multiple of the layer thickness makes sense. And keep it "\r
+"near your wall thickness to make an evenly strong part."\r
+msgstr ""\r
+"Controla el espesor de la capa inferior y superior, la cantidad de capas "\r
+"sólidas se calcula por el espesor de la capa y este valor.\n"\r
+"Tener un valor múltiplo del espesor de la capa tiene sentido. Y mantenerlo "\r
+"cerca de su espesor de pared para hacer una pieza uniformemente fuerte."\r
+\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Relleno"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Fill Density (%)"\r
+msgstr "Densidad Relleno (%)"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid ""\r
+"This controls how densely filled the insides of your print will be. For a "\r
+"solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
+"enough.\n"\r
+"This won't affect the outside of the print and only adjusts how strong the "\r
+"part becomes."\r
+msgstr ""\r
+"Esto controla la densidad de relleno interior de la impresión. Para una "\r
+"impresión sólida usar 100%, para una vacía 0%. Un valor de alrededor de 20% "\r
+"es suficiente por lo general.\n"\r
+"Esto no afectará a la parte exterior de la impresión y sólo afecta a lo "\r
+"fuerte que la pieza será."\r
+\r
+#: Cura/util/profile.py:183\r
+msgid ""\r
+"The nozzle size is very important, this is used to calculate the line width "\r
+"of the infill, and used to calculate the amount of outside wall lines and "\r
+"thickness for the wall thickness you entered in the print settings."\r
+msgstr ""\r
+"El tamaño del noozle es muy importante, se usa para calcular el ancho del "\r
+"trazado y el relleno, y es usado para calcular la cantidad de lineas "\r
+"exteriores y su espesor de pared según los datos introducidos."\r
+\r
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
+msgid "Speed and Temperature"\r
+msgstr "Velocidad "\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Print speed (mm/s)"\r
+msgstr "Velocidad impresión (mm/s)"\r
+\r
+#: Cura/util/profile.py:184\r
+msgid ""\r
+"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
+"s, but for good quality prints you want to print slower. Printing speed "\r
+"depends on a lot of factors. So you will be experimenting with optimal "\r
+"settings for this."\r
+msgstr ""\r
+"Velocid a la que imprime Una Ultimaker bien ajustada puede alcanzar 150mm/s "\r
+"pero para impresiones de calidad es mejor velocidades menores. La velocidad "\r
+"de impresión depende de muchos factores. Experimenta hasta encontrar tus "\r
+"ajustes óptimos."\r
+\r
+#: Cura/util/profile.py:185\r
+msgid "Printing temperature (C)"\r
+msgstr "Temperatura impresión (C)"\r
+\r
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
+msgid ""\r
+"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
+"For PLA a value of 210C is usually used.\n"\r
+"For ABS a value of 230C or higher is required."\r
+msgstr ""\r
+"Temperaturas usadas para imprimir. Deja a 0 para definirlas.\n"\r
+"Para PLA un valor a partir 210C es usual\n"\r
+"Para ABS un valor de 230 o más es requerido."\r
+\r
+#: Cura/util/profile.py:186\r
+msgid "2nd nozzle temperature (C)"\r
+msgstr "Temperatura 2º nozzle (C)"\r
+\r
+#: Cura/util/profile.py:187\r
+msgid "3th nozzle temperature (C)"\r
+msgstr "Temperatura 3º nozzle (C)"\r
+\r
+#: Cura/util/profile.py:188\r
+msgid "4th nozzle temperature (C)"\r
+msgstr "Temperatura 4º nozzle (C)"\r
+\r
+#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Temperatura 3º nozzle (C)"\r
+\r
+#: Cura/util/profile.py:190\r
+msgid "Bed temperature (C)"\r
+msgstr "Temperatura de la cama (C)"\r
+\r
+#: Cura/util/profile.py:190\r
+msgid ""\r
+"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
+msgstr ""\r
+"Temperatura usada para calentar la cama. Pon 0 para calentar tu mismo. "\r
+\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
+msgid "None"\r
+msgstr "Nada"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Touching buildplate"\r
+msgstr "Tocando la cama caliente"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Everywhere"\r
+msgstr "Cualquier sitio"\r
+\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
+msgid "Support"\r
+msgstr "Soportes"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Support type"\r
+msgstr "Tipo de soporte"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid ""\r
+"Type of support structure build.\n"\r
+"\"Touching buildplate\" is the most commonly used support setting.\n"\r
+"\n"\r
+"None does not do any support.\n"\r
+"Touching buildplate only creates support where the support structure will "\r
+"touch the build platform.\n"\r
+"Everywhere creates support even on top of parts of the model."\r
+msgstr ""\r
+"Tipo de estructura de soporte. \n"\r
+"\"Tocar plataforma\" es el ajuste de soporte más utilizado.\n"\r
+"\n"\r
+"Nada no hace ningún tipo de soporte. \n"\r
+"Tocar plataforma creara apoyos en la estructura hasta tocar la "\r
+"plataforma. \n"\r
+"Cualquier sitio creara soportes incluso sobre la pieza"\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
+msgid "Brim"\r
+msgstr "Borde (Brim)"\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
+msgid "Raft"\r
+msgstr "Borrador (Raft)"\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr "Falda"\r
+\r
+#: Cura/util/profile.py:192\r
+msgid "Platform adhesion type"\r
+msgstr "Tipo de adhesion en la cama"\r
+\r
+#: Cura/util/profile.py:192\r
+msgid ""\r
+"Different options that help in preventing corners from lifting due to "\r
+"warping.\n"\r
+"Brim adds a single layer thick flat area around your object which is easy to "\r
+"cut off afterwards, and it is the recommended option.\n"\r
+"Raft adds a thick raster below the object and a thin interface between this "\r
+"and your object.\n"\r
+"(Note that enabling the brim or raft disables the skirt)"\r
+msgstr ""\r
+"Diferentes opciones que ayudan en la prevención de las esquinas de elevación "\r
+"debido a la deformación. \n"\r
+"Falda (Brim) añade una capa de grosor plana alrededor de su objeto, que es "\r
+"fácil de cortar después, y la opción recomendada. \n"\r
+"Borrador (Raft) agrega una trama gruesa por debajo del objeto y una interfaz "\r
+"fina entre esto y su objeto. \n"\r
+"(Tenga en cuenta que la activación de Raft o Brim desactiva el borde-skirt)"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Both"\r
+msgstr "Ambos"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "First extruder"\r
+msgstr "Primer extrusor"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Second extruder"\r
+msgstr "Segundo extrusor"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Support dual extrusion"\r
+msgstr "Soporte extrusión dual"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid ""\r
+"Which extruder to use for support material, for break-away support you can "\r
+"use both extruders.\n"\r
+"But if one of the materials is more expensive then the other you could "\r
+"select an extruder to use for support material. This causes more extruder "\r
+"switches.\n"\r
+"You can also use the 2nd extruder for soluble support materials."\r
+msgstr ""\r
+"Cual extrusor se usa para el material de soporte, para soporte de apoyo, se "\r
+"pueden usar los dos extrusores. \n"\r
+"Sin embargo, si uno de los materiales es más caro que el otro podría "\r
+"seleccionar un extrusor para el material de soporte. Esto hace más cambios "\r
+"de extrusor. \n"\r
+"También puede utilizar la segunda extrusora para materiales de soporte "\r
+"solubles."\r
+\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
+msgid "Dual extrusion"\r
+msgstr "Extrusion doble"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid "Wipe&prime tower"\r
+msgstr "Limpie y la pila principal"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid ""\r
+"The wipe-tower is a tower printed on every layer when switching between "\r
+"nozzles.\n"\r
+"The old nozzle is wiped off on the tower before the new nozzle is used to "\r
+"print the 2nd color."\r
+msgstr ""\r
+"La torre de limpieza es una torre impresa que en cada capa cuando se cambia "\r
+"entre las boquillas.\n"\r
+"La vieja boquilla se limpia en la torre antes de que la nueva boquilla se "\r
+"utiliza para imprimir el segundo color."\r
+\r
+#: Cura/util/profile.py:195\r
+msgid "Wipe&prime tower volume per layer (mm3)"\r
+msgstr "Limpie y volumen de la pila principal por capa (mm3)"\r
+\r
+#: Cura/util/profile.py:195\r
+msgid ""\r
+"The amount of material put in the wipe/prime tower.\n"\r
+"This is done in volume because in general you want to extrude a\n"\r
+"certain amount of volume to get the extruder going, independent on the layer "\r
+"height.\n"\r
+"This means that with thinner layers, your tower gets bigger."\r
+msgstr ""\r
+"La cantidad de material puesto en el pila de limpieza.\n"\r
+"Esto se hace en el volumen porque, en general desea extruir una\n"\r
+"cierta cantidad de volumen para obtener la extrusora va , independientemente "\r
+"de la altura de la capa.\n"\r
+"Esto significa que con capas más delgadas, la pila se hace más grande."\r
+\r
+#: Cura/util/profile.py:196\r
+msgid "Ooze shield"\r
+msgstr "El escudo exudado"\r
+\r
+#: Cura/util/profile.py:196\r
+msgid ""\r
+"The ooze shield is a 1 line thick shell around the object which stands a few "\r
+"mm from the object.\n"\r
+"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
+msgstr ""\r
+"El escudo exudado es una gruesa cáscara de 1 línea alrededor del objeto que "\r
+"se encuentra unos pocos mm desde el objeto .\n"\r
+"Este escudo atrapa cualquier supuración de la boquilla sin utilizar en doble "\r
+"extrusión."\r
+\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
+msgid "Filament"\r
+msgstr "Filamento"\r
+\r
+#: Cura/util/profile.py:197\r
+msgid "Diameter (mm)"\r
+msgstr "Diámetro (mm)"\r
+\r
+#: Cura/util/profile.py:197\r
+msgid ""\r
+"Diameter of your filament, as accurately as possible.\n"\r
+"If you cannot measure this value you will have to calibrate it, a higher "\r
+"number means less extrusion, a smaller number generates more extrusion."\r
+msgstr ""\r
+"Diámetro del filamento, con la mayor precisión posible.\n"\r
+"Si no se puede medir este valor tendrá que calibrarlo, más alto significa "\r
+"menos extrusión, más pequeño genera más extrusión."\r
+\r
+#: Cura/util/profile.py:198\r
+msgid "Diameter2 (mm)"\r
+msgstr "Diámetro 2(mm)"\r
+\r
+#: Cura/util/profile.py:198\r
+msgid ""\r
+"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diámetro de tu filamento para el 2º extrusor. Usa 0 para usar el mismo "\r
+"diámetro que para el 1."\r
+\r
+#: Cura/util/profile.py:199\r
+msgid "Diameter3 (mm)"\r
+msgstr "Diametro 3(mm)"\r
+\r
+#: Cura/util/profile.py:199\r
+msgid ""\r
+"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diametro de tu filamento para el 3º extrusor. Usa 0 para usar el mismo "\r
+"diametro que para el 1."\r
+\r
+#: Cura/util/profile.py:200\r
+msgid "Diameter4 (mm)"\r
+msgstr "Diametro 4(mm)"\r
+\r
+#: Cura/util/profile.py:200\r
+msgid ""\r
+"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diametro de tu filamento para el 4º extrusor. Usa 0 para usar el mismo "\r
+"diametro que para el 1."\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Diámetro (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diametro de tu filamento para el 3º extrusor. Usa 0 para usar el mismo "\r
+"diametro que para el 1."\r
+\r
+#: Cura/util/profile.py:202\r
+msgid "Flow (%)"\r
+msgstr "Flujo (%)"\r
+\r
+#: Cura/util/profile.py:202\r
+msgid ""\r
+"Flow compensation, the amount of material extruded is multiplied by this "\r
+"value"\r
+msgstr ""\r
+"Compensación de flujo, la cantidad de material extruida se multiplicará por "\r
+"este valor"\r
+\r
+#: Cura/util/profile.py:203\r
+msgid "Speed (mm/s)"\r
+msgstr "Velocidad (mm/s)"\r
+\r
+#: Cura/util/profile.py:203\r
+msgid ""\r
+"Speed at which the filament is retracted, a higher retraction speed works "\r
+"better. But a very high retraction speed can lead to filament grinding."\r
+msgstr ""\r
+"Velocidad a la que el filamento es retraido, a mayor velocidad mejor "\r
+"funcionamiento. Velocidades muy alta puedes comerse el filamento."\r
+\r
+#: Cura/util/profile.py:204\r
+msgid "Distance (mm)"\r
+msgstr "Distancia (mm)"\r
+\r
+#: Cura/util/profile.py:204\r
+msgid ""\r
+"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
+"seems to generate good results."\r
+msgstr ""\r
+"Cantidad de retracción, fijar a 0 para no retraer. Un valor de 4.5mm parece "\r
+"ofrecer buenos resultados."\r
+\r
+#: Cura/util/profile.py:205\r
+msgid "Dual extrusion switch amount (mm)"\r
+msgstr "Extrusión dual cantidad de cambio (mm)"\r
+\r
+#: Cura/util/profile.py:205\r
+msgid ""\r
+"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
+"no retraction at all. A value of 16.0mm seems to generate good results."\r
+msgstr ""\r
+"Cantidd de retracción cuando cambiar nozzle con extrusión dual, fijar a 0 "\r
+"para no retraer. Un valor de 16 mm parece ofrecer buenos resultados."\r
+\r
+#: Cura/util/profile.py:206\r
+msgid "Minimum travel (mm)"\r
+msgstr "Viaje mínimo (mm)"\r
+\r
+#: Cura/util/profile.py:206\r
+msgid ""\r
+"Minimum amount of travel needed for a retraction to happen at all. To make "\r
+"sure you do not get a lot of retractions in a small area."\r
+msgstr ""\r
+"Minima distancia de desplazamiento necesaria para retraer. Para asegurar que "\r
+"no retrae en pequeñas areas"\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Enable combing"\r
+msgstr "Habilitar peinado (combing)"\r
+\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
+msgid ""\r
+"Combing is the act of avoiding holes in the print for the head to travel "\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
+msgstr ""\r
+"Peinado (combing) es el acto de evitar los agujeros en la impresión. Si esta "\r
+"desactiva el cabezal de impresión se desplaza directamente desde el punto de "\r
+"inicio hasta el punto final y siempre se retrae."\r
+\r
+#: Cura/util/profile.py:208\r
+msgid "Minimal extrusion before retracting (mm)"\r
+msgstr "Mínima extrusión para retraer (mm)"\r
+\r
+#: Cura/util/profile.py:208\r
+msgid ""\r
+"The minimal amount of extrusion that needs to be done before retracting "\r
+"again if a retraction needs to happen before this minimal is reached the "\r
+"retraction is ignored.\n"\r
+"This avoids retracting a lot on the same piece of filament which flattens "\r
+"the filament and causes grinding issues."\r
+msgstr ""\r
+"La cantidad mínima de extrusión que hay que hacer antes de retraer de nuevo "\r
+"si una retracción tiene que ocurrir antes de que este mínimo se alcanza la "\r
+"retracción se ignora.\n"\r
+"Esto evita la retracción mucho en la misma pieza de filamento que se aplana "\r
+"el filamento y provoca problemas de molienda."\r
+\r
+#: Cura/util/profile.py:209\r
+msgid "Z hop when retracting (mm)"\r
+msgstr "Mínima extrusión para retraer (mm)"\r
+\r
+#: Cura/util/profile.py:209\r
+msgid ""\r
+"When a retraction is done, the head is lifted by this amount to travel over "\r
+"the print. A value of 0.075 works well. This feature has a lot of positive "\r
+"effect on delta towers."\r
+msgstr ""\r
+"Cuando se realiza una retractación, la cabeza es levantada por esta cantidad "\r
+"para viajar por la impresión. Un valor de 0,075 funciona bien. Esta "\r
+"característica tiene una gran cantidad de efecto positivo en torres delta."\r
+\r
+#: Cura/util/profile.py:210\r
+msgid "Initial layer thickness (mm)"\r
+msgstr "Espesor capa inicial (mm)"\r
+\r
+#: Cura/util/profile.py:210\r
+msgid ""\r
+"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
+"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
+"the other layers."\r
+msgstr ""\r
+"Espesor de capa inferior. Un capa inferior mas gruesa ayuda a adherir la "\r
+"impresión mejor. Un valor de 0.0 hara que la capa tenga el mismo espesor que "\r
+"las demás."\r
+\r
+#: Cura/util/profile.py:211\r
+msgid "Initial layer line width (%)"\r
+msgstr "Ancho de linea de la capa (mm)"\r
+\r
+#: Cura/util/profile.py:211\r
+msgid ""\r
+"Extra width factor for the extrusion on the first layer, on some printers "\r
+"it's good to have wider extrusion on the first layer to get better bed "\r
+"adhesion."\r
+msgstr ""\r
+"Factor de espesor extra para la extrusión en la primera capa, en algunas "\r
+"impresoras es bueno tener más ancho de extrusión en la primera capa para "\r
+"obtener una mejor adherencia cama."\r
+\r
+#: Cura/util/profile.py:212\r
+msgid "Cut off object bottom (mm)"\r
+msgstr "Cortar fondo del objeto (mm)"\r
+\r
+#: Cura/util/profile.py:212\r
+msgid ""\r
+"Sinks the object into the platform, this can be used for objects that do not "\r
+"have a flat bottom and thus create a too small first layer."\r
+msgstr ""\r
+"Hunde el objeto en la plataforma, esto puede ser utilizado para objetos que "\r
+"no tienen un fondo plano y por lo tanto crean una primera capa demasiado "\r
+"pequeño."\r
+\r
+#: Cura/util/profile.py:214\r
+msgid "Dual extrusion overlap (mm)"\r
+msgstr "Superposición de la extrusión dual"\r
+\r
+#: Cura/util/profile.py:214\r
+msgid ""\r
+"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
+"bonds the different colors together."\r
+msgstr ""\r
+"Añadir cierta cantidad de superposición en las extrusiones doble. Esto "\r
+"mezcla mejor diferentes colores."\r
+\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
+msgid "Speed"\r
+msgstr "Velocidad"\r
+\r
+#: Cura/util/profile.py:215\r
+msgid "Travel speed (mm/s)"\r
+msgstr "Velocidad desplazamientos (mm/s)"\r
+\r
+#: Cura/util/profile.py:215\r
+msgid ""\r
+"Speed at which travel moves are done, a well built Ultimaker can reach "\r
+"speeds of 250mm/s. But some machines might miss steps then."\r
+msgstr ""\r
+"Velocidad a la que se realizan viajes movimientos, un Ultimaker bien "\r
+"construido puede alcanzar velocidades de 250 mm/s . Pero algunas máquinas "\r
+"podrían perderse los pasos a continuación ."\r
+\r
+#: Cura/util/profile.py:216\r
+msgid "Bottom layer speed (mm/s)"\r
+msgstr "Velociad capa inferior (mm/s)"\r
+\r
+#: Cura/util/profile.py:216\r
+msgid ""\r
+"Print speed for the bottom layer, you want to print the first layer slower "\r
+"so it sticks better to the printer bed."\r
+msgstr ""\r
+"Velocidad de impresión para la capa inferior, esta capa debe imprimirse mas "\r
+"lenta para mejor la adhesión."\r
+\r
+#: Cura/util/profile.py:217\r
+msgid "Infill speed (mm/s)"\r
+msgstr "Velocidad relleno (mm/s)"\r
+\r
+#: Cura/util/profile.py:217\r
+msgid ""\r
+"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
+"used for the infill. Printing the infill faster can greatly reduce printing "\r
+"time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Velocidad a la que se imprimen las piezas de relleno. Si se establece en 0, "\r
+"entonces la velocidad de impresión se utiliza para el relleno. Imprimir el "\r
+"relleno más rápido puede reducir considerablemente el tiempo de impresión, "\r
+"pero esto puede afectar negativamente a la calidad de impresión."\r
+\r
+#: Cura/util/profile.py:218\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Velocidad capa superior e inferior (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Velocidad a la que arriba/partes inferiores se imprimen. Si se establece en "\r
+"0, entonces la velocidad de impresión se utiliza para el relleno. Impresión "\r
+"de la parte superior/inferior más rápido puede reducir considerablemente el "\r
+"tiempo de impresión, pero esto puede afectar negativamente a la calidad de "\r
+"impresión."\r
+\r
+#: Cura/util/profile.py:219\r
+msgid "Outer shell speed (mm/s)"\r
+msgstr "Velocidad del borde externa (mm/s)"\r
+\r
+#: Cura/util/profile.py:219\r
+msgid ""\r
+"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
+"used. Printing the outer shell at a lower speed improves the final skin "\r
+"quality. However, having a large difference between the inner shell speed "\r
+"and the outer shell speed will effect quality in a negative way."\r
+msgstr ""\r
+"Velocidad a la que se imprime cáscara externa. Si se establece en 0, "\r
+"entonces se utiliza la velocidad de impresión. Impresión de la capa exterior "\r
+"a una velocidad inferior mejora la calidad final de la piel. Sin embargo, "\r
+"tener una gran diferencia entre la velocidad de la cáscara interior y la "\r
+"cáscara exterior velocidad afectará a la calidad de una manera negativa."\r
+\r
+#: Cura/util/profile.py:220\r
+msgid "Inner shell speed (mm/s)"\r
+msgstr "Velocidad relleno interno (mm/s)"\r
+\r
+#: Cura/util/profile.py:220\r
+msgid ""\r
+"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
+"used. Printing the inner shell faster then the outer shell will reduce "\r
+"printing time. It is good to set this somewhere in between the outer shell "\r
+"speed and the infill/printing speed."\r
+msgstr ""\r
+"Velocidad a la que son impresos los rellenos. Si dejas 0 se usara la "\r
+"velocidad de impresión. Imprimir los rellenos más rápido puede reducir mucho "\r
+"el tiempo de impresión, pero puede puede afectar negativamente la calidad."\r
+\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
+msgid "Cool"\r
+msgstr "Ventilación"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid "Minimal layer time (sec)"\r
+msgstr "Minimo tiempo por capa (seg)"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid ""\r
+"Minimum time spent in a layer, gives the layer time to cool down before the "\r
+"next layer is put on top. If the layer will be placed down too fast the "\r
+"printer will slow down to make sure it has spent at least this amount of "\r
+"seconds printing this layer."\r
+msgstr ""\r
+"Tiempo mínimo de permanencia en una capa, le da al tiempo de capa para que "\r
+"se enfríe antes de poner la siguiente capa en la parte superior. Si la capa "\r
+"se colocará abajo demasiado rápido la impresora se ralentizará para "\r
+"asegurarse de que ha pasado por lo menos esta cantidad de segundos la "\r
+"impresión de esta capa."\r
+\r
+#: Cura/util/profile.py:222\r
+msgid "Enable cooling fan"\r
+msgstr "Habilitar ventilación"\r
+\r
+#: Cura/util/profile.py:222\r
+msgid ""\r
+"Enable the cooling fan during the print. The extra cooling from the cooling "\r
+"fan is essential during faster prints."\r
+msgstr ""\r
+"Activa la ventilación durante la impresión. La ventilación extra es esencial "\r
+"en las impresiones rápidas."\r
+\r
+#: Cura/util/profile.py:224\r
+msgid "Line count"\r
+msgstr "Numero lineas"\r
+\r
+#: Cura/util/profile.py:224\r
+msgid ""\r
+"The skirt is a line drawn around the object at the first layer. This helps "\r
+"to prime your extruder, and to see if the object fits on your platform.\n"\r
+"Setting this to 0 will disable the skirt. Multiple skirt lines can help "\r
+"priming your extruder better for small objects."\r
+msgstr ""\r
+"El Borde es una linea alrededor del objeto en la primera capa. Esto ayuda a "\r
+"limpiar el extrusor y ver si caben los objetos en la plataforma.\n"\r
+"Un valor de 0 desactiva el Borde. Multiples lineas ayudan a cebar el "\r
+"extrusor para objetos pequeños."\r
+\r
+#: Cura/util/profile.py:225\r
+msgid "Start distance (mm)"\r
+msgstr "Distancia de inicio (mm)"\r
+\r
+#: Cura/util/profile.py:225\r
+msgid ""\r
+"The distance between the skirt and the first layer.\n"\r
+"This is the minimal distance, multiple skirt lines will be put outwards from "\r
+"this distance."\r
+msgstr ""\r
+"La distancia entre el borde y la primera capa.\n"\r
+"Esta es la mínima distancia, multiples bordes se pondrán hacia afuera."\r
+\r
+#: Cura/util/profile.py:226\r
+msgid "Minimal length (mm)"\r
+msgstr "Minima longitud (mm)"\r
+\r
+#: Cura/util/profile.py:226\r
+msgid ""\r
+"The minimal length of the skirt, if this minimal length is not reached it "\r
+"will add more skirt lines to reach this minimal lenght.\n"\r
+"Note: If the line count is set to 0 this is ignored."\r
+msgstr ""\r
+"La longitud mínima de la falda (skirt), si no se alcanza esta longitud "\r
+"mínima, añadirá más líneas a la falda (skirt) para llegar a esta longitud "\r
+"mínima.\n"\r
+"Nota: Si el número de línea se establece en 0 esto se ignora."\r
+\r
+#: Cura/util/profile.py:227\r
+msgid "Fan full on at height (mm)"\r
+msgstr "Ventidador desde la altura (mm)"\r
+\r
+#: Cura/util/profile.py:227\r
+msgid ""\r
+"The height at which the fan is turned on completely. For the layers below "\r
+"this the fan speed is scaled linearly with the fan off at layer 0."\r
+msgstr ""\r
+"La altura a la que el ventilador se enciende completamente. Para las capas "\r
+"por debajo de esta la velocidad del ventilador se escala linealmente con el "\r
+"ventilador en la capa 0."\r
+\r
+#: Cura/util/profile.py:228\r
+msgid "Fan speed min (%)"\r
+msgstr "Velocidad ventilador min (%)"\r
+\r
+#: Cura/util/profile.py:228\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
+msgstr ""\r
+"Cuando el ventilador esta activado, funciona a esta velocidad. Si la "\r
+"ventilación reduce la velocidad de la capa, el ventilador se ajustará en las "\r
+"velocidades max y min. La velocidad minima será usada si no se reduce la "\r
+"velocidad debido al la ventilación."\r
+\r
+#: Cura/util/profile.py:229\r
+msgid "Fan speed max (%)"\r
+msgstr "Velocidad ventilador max (%)"\r
+\r
+#: Cura/util/profile.py:229\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Maximal fan speed is used if the layer is slowed down due to cooling by more "\r
+"than 200%."\r
+msgstr ""\r
+"Cuando el ventilador está encendido, se habilita en este nivel de velocidad. "\r
+"Si la ventialción ralentiza la capa, se ajusta entre el min y la velocidad "\r
+"máxima. Máxima velocidad del ventilador se utiliza si la capa se hace más "\r
+"lenta debido al enfriamiento por más de 200%."\r
+\r
+#: Cura/util/profile.py:230\r
+msgid "Minimum speed (mm/s)"\r
+msgstr "Minima velocidad (mm/s)"\r
+\r
+#: Cura/util/profile.py:230\r
+msgid ""\r
+"The minimal layer time can cause the print to slow down so much it starts to "\r
+"ooze. The minimal feedrate protects against this. Even if a print gets "\r
+"slowed down it will never be slower than this minimal speed."\r
+msgstr ""\r
+"El tiempo mínimo por capa puede hacer que la impresión se ralentice tanto "\r
+"que empieza a exudar. El avance mínimo protege contra esto. Incluso si una "\r
+"impresión se ralentiza nunca será más lenta que la velocidad mínima."\r
+\r
+#: Cura/util/profile.py:231\r
+msgid "Cool head lift"\r
+msgstr "Cool head lift"\r
+\r
+#: Cura/util/profile.py:231\r
+msgid ""\r
+"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
+"the extra time so the minimal layer time is always hit."\r
+msgstr ""\r
+"Levante la cabeza si la velocidad mínima es alcanzada por la desaceleración "\r
+"de la ventilación, y esperar el tiempo extra para que el tiempo mínimo por "\r
+"capa siempre se alcance."\r
+\r
+#: Cura/util/profile.py:232\r
+msgid "Solid infill top"\r
+msgstr "Relleno solido superior"\r
+\r
+#: Cura/util/profile.py:232\r
+msgid ""\r
+"Create a solid top surface, if set to false the top is filled with the fill "\r
+"percentage. Useful for cups/vases."\r
+msgstr ""\r
+"Crea una superficie superior solidad, si esta desactivado se rellena con el "\r
+"porcentaje de rellon. Util para vaso y tazas."\r
+\r
+#: Cura/util/profile.py:233\r
+msgid "Solid infill bottom"\r
+msgstr "Relleno solido inferior"\r
+\r
+#: Cura/util/profile.py:233\r
+msgid ""\r
+"Create a solid bottom surface, if set to false the bottom is filled with the "\r
+"fill percentage. Useful for buildings."\r
+msgstr ""\r
+"Crea una superficie solida inferior, si se desactiva la capa inferior se "\r
+"realiza con el porc. del relleno. Útil para edificios."\r
+\r
+#: Cura/util/profile.py:234\r
+msgid "Infill overlap (%)"\r
+msgstr "Superposición relleno (%)"\r
+\r
+#: Cura/util/profile.py:234\r
+msgid ""\r
+"Amount of overlap between the infill and the walls. There is a slight "\r
+"overlap with the walls and the infill so the walls connect firmly to the "\r
+"infill."\r
+msgstr ""\r
+"Cantidad de superposicion entre el relleno y las paredes. Un ligera "\r
+"superposición entre paredes y relleno conecta firmemente ambas."\r
+\r
+#: Cura/util/profile.py:235\r
+msgid "Structure type"\r
+msgstr "Tipo de soporte"\r
+\r
+#: Cura/util/profile.py:235\r
+msgid ""\r
+"The type of support structure.\n"\r
+"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
+"too strong.\n"\r
+"Lines are single walled lines that break off one at a time. Which is more "\r
+"work to remove, but as it is less strong it does work better on tricky "\r
+"prints."\r
+msgstr ""\r
+"El tipo de estructura de soporte.\n"\r
+"Grilla es muy fuerte y puede salir en 1 pieza, sin embargo, a veces es "\r
+"demasiado fuerte.\n"\r
+"Las líneas son líneas de pared única que se desprenden de una en una. ¿Qué "\r
+"es más trabajo para eliminar, pero ya que es menos fuerte que funcionara "\r
+"mejor en impresiones difíciles."\r
+\r
+#: Cura/util/profile.py:236\r
+msgid "Overhang angle for support (deg)"\r
+msgstr "Ángulo saliente de apoyo (grados)"\r
+\r
+#: Cura/util/profile.py:236\r
+msgid ""\r
+"The minimal angle that overhangs need to have to get support. With 90 degree "\r
+"being horizontal and 0 degree being vertical."\r
+msgstr ""\r
+"El ángulo mínimo que voladizos hay que tener para obtener apoyo. Con 90 "\r
+"grados de ser horizontal y 0 grados verticales."\r
+\r
+#: Cura/util/profile.py:237\r
+msgid "Fill amount (%)"\r
+msgstr "Cantidad de relleno (%)"\r
+\r
+#: Cura/util/profile.py:237\r
+#, python-format\r
+msgid ""\r
+"Amount of infill structure in the support material, less material gives "\r
+"weaker support which is easier to remove. 15% seems to be a good average."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:238\r
+msgid "Distance X/Y (mm)"\r
+msgstr "Distancia X/Y (mm)"\r
+\r
+#: Cura/util/profile.py:238\r
+msgid ""\r
+"Distance of the support material from the print, in the X/Y directions.\n"\r
+"0.7mm gives a nice distance from the print so the support does not stick to "\r
+"the print."\r
+msgstr ""\r
+"Distancia del material de soporte a la impresión, en las direcciones X/Y.\n"\r
+"0.7mm da buen resultado y el soporte no se pega a la impresión."\r
+\r
+#: Cura/util/profile.py:239\r
+msgid "Distance Z (mm)"\r
+msgstr "Distancia Z (mm)"\r
+\r
+#: Cura/util/profile.py:239\r
+msgid ""\r
+"Distance from the top/bottom of the support to the print. A small gap here "\r
+"makes it easier to remove the support but makes the print a bit uglier.\n"\r
+"0.15mm gives a good seperation of the support material."\r
+msgstr ""\r
+"Distancia desde la parte superior/inferior del soporte a la impresión. Un "\r
+"pequeño espacio aquí hace que sea más fácil de quitar el apoyo, pero hace "\r
+"que la impresión mas fea.\n"\r
+"0,15 mm da una buena separación del material de soporte."\r
+\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
+msgid "Black Magic"\r
+msgstr "Magia negra"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid "Spiralize the outer contour"\r
+msgstr "Espiralizar el contorno exterior"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid ""\r
+"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
+"steady Z increase over the whole print. This feature turns a solid object "\r
+"into a single walled print with a solid bottom.\n"\r
+"This feature used to be called Joris in older versions."\r
+msgstr ""\r
+"Espiralizar está allanando el movimiento Z del borde exterior . Esto creará "\r
+"un incremento Z constante durante toda la impresión. Esta característica "\r
+"convierte a un objeto sólido en una impresión de una sola pared con un fondo "\r
+"sólido.\n"\r
+"Esta característica se llamaba Joris en versiones anteriores."\r
+\r
+#: Cura/util/profile.py:241\r
+msgid "Only follow mesh surface"\r
+msgstr "Sólo seguir superficie de malla"\r
+\r
+#: Cura/util/profile.py:241\r
+msgid ""\r
+"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
+"infill, no top/bottom, nothing."\r
+msgstr ""\r
+"Sólo siga las superficies de malla del modelo 3D, no hacer nada más. Sin "\r
+"relleno, no superior e inferior, ni nada."\r
+\r
+#: Cura/util/profile.py:243\r
+msgid "Brim line amount"\r
+msgstr "Cantidad de bordes"\r
+\r
+#: Cura/util/profile.py:243\r
+msgid ""\r
+"The amount of lines used for a brim, more lines means a larger brim which "\r
+"sticks better, but this also makes your effective print area smaller."\r
+msgstr ""\r
+"La cantidad de lineas usada por Brim, mas lineas significa mayor Brim y "\r
+"mejor adhesión, pero hace tu área efectiva de impresión menor."\r
+\r
+#: Cura/util/profile.py:244\r
+msgid "Extra margin (mm)"\r
+msgstr "Margen extra (mm)"\r
+\r
+#: Cura/util/profile.py:244\r
+msgid ""\r
+"If the raft is enabled, this is the extra raft area around the object which "\r
+"is also rafted. Increasing this margin will create a stronger raft while "\r
+"using more material and leaving less area for your print."\r
+msgstr ""\r
+"Si la borrador (raft) está activada, esta es la zona de borrador adicional "\r
+"alrededor del objeto que también esta bocetado. El aumento de este margen "\r
+"creará un sostén más fuerte durante el uso de más material y dejando menos "\r
+"espacio para su impresión."\r
+\r
+#: Cura/util/profile.py:245\r
+msgid "Line spacing (mm)"\r
+msgstr "Espacio entre lineas (mm)"\r
+\r
+#: Cura/util/profile.py:245\r
+msgid ""\r
+"When you are using the raft this is the distance between the centerlines of "\r
+"the raft line."\r
+msgstr ""\r
+"Cuando se utiliza la balsa es la distancia entre las líneas centrales del "\r
+"relleno de balsa."\r
+\r
+#: Cura/util/profile.py:246\r
+msgid "Base thickness (mm)"\r
+msgstr "Grosor de la base (mm)"\r
+\r
+#: Cura/util/profile.py:246\r
+msgid ""\r
+"When you are using the raft this is the thickness of the base layer which is "\r
+"put down."\r
+msgstr ""\r
+"Cuando se utiliza la balsa es el espesor de la capa de balsa que es puesta "\r
+"abajo."\r
+\r
+#: Cura/util/profile.py:247\r
+msgid "Base line width (mm)"\r
+msgstr "Ancho de la linea base (mm)"\r
+\r
+#: Cura/util/profile.py:247\r
+msgid ""\r
+"When you are using the raft this is the width of the base layer lines which "\r
+"are put down."\r
+msgstr ""\r
+"Cuando se utiliza la balsa es el ancho de la capa de balsa que es puesta "\r
+"abajo."\r
+\r
+#: Cura/util/profile.py:248\r
+msgid "Interface thickness (mm)"\r
+msgstr "Espesor interfaz (mm)"\r
+\r
+#: Cura/util/profile.py:248\r
+msgid ""\r
+"When you are using the raft this is the thickness of the interface layer "\r
+"which is put down."\r
+msgstr ""\r
+"Cuando estás usando raft-balsa est es el espesor de la linea de interfaz que "\r
+"será depositada"\r
+\r
+#: Cura/util/profile.py:249\r
+msgid "Interface line width (mm)"\r
+msgstr "Ancho de linea de la interfaz (mm)"\r
+\r
+#: Cura/util/profile.py:249\r
+msgid ""\r
+"When you are using the raft this is the width of the interface layer lines "\r
+"which are put down."\r
+msgstr ""\r
+"Cuando estás usando raft-balsa est es el ancho de la linea de interfaz que "\r
+"será depositada"\r
+\r
+#: Cura/util/profile.py:250\r
+msgid "Airgap"\r
+msgstr "Capa liviana"\r
+\r
+#: Cura/util/profile.py:250\r
+msgid "Gap between the last layer of the raft the whole print."\r
+msgstr "Brecha entre la última capa de boceto (raft) que toda la impresión."\r
+\r
+#: Cura/util/profile.py:251\r
+msgid "First Layer Airgap"\r
+msgstr "Primero capa liviana"\r
+\r
+#: Cura/util/profile.py:251\r
+msgid ""\r
+"Gap between the last layer of the raft and the first printing layer. A small "\r
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
+"value is added on top of the 'Airgap' setting."\r
+msgstr ""\r
+"Brecha entre la última capa de el borrador (raft) y la primera capa de "\r
+"impresión. Un pequeño espacio de 0,2mm hace maravillas en PLA y hace que el "\r
+"borrador (raft) fácil de quitar. Este valor se añade encima del parámetro de "\r
+"\"dispersión superficial\"."\r
+\r
+#: Cura/util/profile.py:252\r
+msgid "Surface layers"\r
+msgstr "Capa de superficie"\r
+\r
+#: Cura/util/profile.py:252\r
+msgid ""\r
+"Amount of surface layers put on top of the raft, these are fully filled "\r
+"layers on which the model is printed."\r
+msgstr ""\r
+"Importe de las capas superficiales, situadas una encima del boceto (raft), "\r
+"estos son totalmente capas llenas en la que se imprime el modelo."\r
+\r
+#: Cura/util/profile.py:253\r
+msgid "Surface layer thickness (mm)"\r
+msgstr "Espesor de la capa de superficie (mm)"\r
+\r
+#: Cura/util/profile.py:253\r
+msgid "Thickness of each surface layer."\r
+msgstr "Espesor de cada capa de la superficie."\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Surface layer line width (mm)"\r
+msgstr "Ancho de la capa de superficie (mm)"\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Width of the lines for each surface layer."\r
+msgstr "Espesor de las líneas para cada capa de la superficie."\r
+\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
+msgid "Fix horrible"\r
+msgstr "Corregir horrible"\r
+\r
+#: Cura/util/profile.py:255\r
+msgid "Combine everything (Type-A)"\r
+msgstr "Combinar todo (Tipo-A)"\r
+\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
+msgid ""\r
+"This expert option adds all parts of the model together. The result is "\r
+"usually that internal cavities disappear. Depending on the model this can be "\r
+"intended or not. Enabling this option is at your own risk. Type-A is "\r
+"dependent on the model normals and tries to keep some internal holes intact. "\r
+"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
+msgstr ""\r
+"Esta opción experta agrega todas las partes del modelo en conjunto. El "\r
+"resultado suele ser que las cavidades internas desaparecen. Dependiendo del "\r
+"modelo de esto puede requerido o no. La activación de esta opción es a su "\r
+"propio riesgo. Tipo-A se depende de los modelos normales y trata de mantener "\r
+"algunos agujeros internos intactos. Tipo-B ignora todos los agujeros "\r
+"internos y sólo mantiene la forma exterior por capa."\r
+\r
+#: Cura/util/profile.py:256\r
+msgid "Combine everything (Type-B)"\r
+msgstr "Combinar todo (Tipo-B)"\r
+\r
+#: Cura/util/profile.py:257\r
+msgid "Keep open faces"\r
+msgstr "Mantener caras abiertas"\r
+\r
+#: Cura/util/profile.py:257\r
+msgid ""\r
+"This expert option keeps all the open bits of the model intact. Normally "\r
+"Cura tries to stitch up small holes and remove everything with big holes, "\r
+"but this option keeps bits that are not properly part of anything and just "\r
+"goes with whatever is left. This option is usually not what you want, but it "\r
+"might enable you to slice models otherwise failing to produce proper paths.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+"Esta opción experto mantiene todos los agujeros del modelo intactos. "\r
+"Normalmente Cura intenta suturar pequeños agujeros y eliminar todo en los "\r
+"grandes , pero esta opción mantiene agujeros que no son propiamente parte de "\r
+"nada y sólo va con lo que se deja. Esta opción no suele ser lo que quieras, "\r
+"pero podría permitir que usted rebane modelos que de lo contrario "\r
+"resultarían fallidos.\n"\r
+"Al igual que con todos los \"Correjir horribles \" los resultados pueden "\r
+"variar y usar a su propio riesgo."\r
+\r
+#: Cura/util/profile.py:258\r
+msgid "Extensive stitching"\r
+msgstr "Costura amplia"\r
+\r
+#: Cura/util/profile.py:258\r
+msgid ""\r
+"Extensive stitching tries to fix up open holes in the model by closing the "\r
+"hole with touching polygons. This algorthm is quite expensive and could "\r
+"introduce a lot of processing time.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+"Costura amplia intenta de arreglar los agujeros en el modelo cerrando "\r
+"agujeros con polígonos. Este algoritmo es complejo y puede tardar en "\r
+"procesar.\n"\r
+"Igual que \"Fix horrible\" puede tener resultados diversos úsalo bajo tu "\r
+"riesgo."\r
+\r
+#: Cura/util/profile.py:486\r
+msgid "Save profile on slice"\r
+msgstr "Guardar perfil al filetear"\r
+\r
+#: Cura/util/profile.py:486\r
+msgid ""\r
+"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
+msgstr ""\r
+"Cuando se filetee guardar el perfil como [stl_file]_profile.ini junto al "\r
+"modelo."\r
+\r
+#: Cura/util/profile.py:487\r
+msgid "Cost (price/kg)"\r
+msgstr "Coste (precio/kg)"\r
+\r
+#: Cura/util/profile.py:487\r
+msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
+msgstr ""\r
+"Coste de tu filamento por kg, para estimar el coste de la impresión final."\r
+\r
+#: Cura/util/profile.py:488\r
+msgid "Cost (price/m)"\r
+msgstr "Coster (precio/m)"\r
+\r
+#: Cura/util/profile.py:488\r
+msgid ""\r
+"Cost of your filament per meter, to estimate the cost of the final print."\r
+msgstr ""\r
+"Coste de tu filamento por metro, para estimar el coste de tu impresión final."\r
+\r
+#: Cura/util/profile.py:489\r
+msgid "Auto detect SD card drive"\r
+msgstr "Autodetectar tajeta SD"\r
+\r
+#: Cura/util/profile.py:489\r
+msgid ""\r
+"Auto detect the SD card. You can disable this because on some systems "\r
+"external hard-drives or USB sticks are detected as SD card."\r
+msgstr ""\r
+"Autodetectando SD card. Puedes deshabilitar esto porque algunos discos duros "\r
+"o pendrive son detectados como SD card."\r
+\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
+msgid "Check for updates"\r
+msgstr "Comprobando actualizaciones"\r
+\r
+#: Cura/util/profile.py:502\r
+msgid "Check for newer versions of Cura on startup"\r
+msgstr "Comprobar nuevas versiones de Cura en el inicio"\r
+\r
+#: Cura/util/profile.py:503\r
+msgid "Send usage statistics"\r
+msgstr "Enviar estadisticas de uso"\r
+\r
+#: Cura/util/profile.py:503\r
+msgid "Submit anonymous usage information to improve future versions of Cura"\r
+msgstr "Enviar información anónima para mejor las próximas versiones de Cura"\r
+\r
+#: Cura/util/profile.py:505\r
+msgid "Density (kg/m3)"\r
+msgstr "Densidad (kg/m3)"\r
+\r
+#: Cura/util/profile.py:505\r
+msgid ""\r
+"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
+"This value is used to estimate the weight if the filament used for the print."\r
+msgstr ""\r
+"Peso del filamento por m3. Sobre 1240 para el PLA y sobre 1040 para ABS. "\r
+"Este valor es usado para estimar el peso del filamento usado en la impresión."\r
+\r
+#: Cura/util/profile.py:506\r
+msgid ""\r
+"Change the language in which Cura runs. Switching language requires a "\r
+"restart of Cura"\r
+msgstr ""\r
+"Cambiar el idioma en el que se ejecuta Cura. El Cambio de idioma requiere un "\r
+"reinicio del Cura"\r
+\r
+#: Cura/util/profile.py:509\r
+msgid "Model colour"\r
+msgstr "Color Modelo"\r
+\r
+#: Cura/util/profile.py:509\r
+msgid "Display color for first extruder"\r
+msgstr "Color de la pantalla para la primera extrusora"\r
+\r
+#: Cura/util/profile.py:510\r
+msgid "Model colour (2)"\r
+msgstr "Color Modelo (2)"\r
+\r
+#: Cura/util/profile.py:510\r
+msgid "Display color for second extruder"\r
+msgstr "Color de la pantalla para la segunda extrusora"\r
+\r
+#: Cura/util/profile.py:511\r
+msgid "Model colour (3)"\r
+msgstr "Color Modelo (3)"\r
+\r
+#: Cura/util/profile.py:511\r
+msgid "Display color for third extruder"\r
+msgstr "Color de la pantalla por el tercer extrusor"\r
+\r
+#: Cura/util/profile.py:512\r
+msgid "Model colour (4)"\r
+msgstr "Color Modelo (4)"\r
+\r
+#: Cura/util/profile.py:512\r
+msgid "Display color for forth extruder"\r
+msgstr "Color de la pantalla para extrusora adelante"\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Printing window type"\r
+msgstr "Impresión tipo de ventana"\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Select the interface used for USB printing."\r
+msgstr "Seleccione la interfaz que se utiliza para la impresión USB ."\r
+\r
+#: Cura/util/profile.py:525\r
+msgid "Maximum width (mm)"\r
+msgstr "Máxima anchura (mm)"\r
+\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
+msgid "Size of the machine in mm"\r
+msgstr "Tamaño de la maquina en mm"\r
+\r
+#: Cura/util/profile.py:526\r
+msgid "Maximum depth (mm)"\r
+msgstr "Maxima profundidad (mm)"\r
+\r
+#: Cura/util/profile.py:527\r
+msgid "Maximum height (mm)"\r
+msgstr "Máxima altura (mm)"\r
+\r
+#: Cura/util/profile.py:528\r
+msgid "Machine center 0,0"\r
+msgstr "Centro de la maquina 0,0"\r
+\r
+#: Cura/util/profile.py:528\r
+msgid ""\r
+"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
+"left corner."\r
+msgstr ""\r
+"Máquinas firmware define el centro de la cama como 0,0 en lugar de la "\r
+"esquina frontal izquierda."\r
+\r
+#: Cura/util/profile.py:529\r
+msgid "Build area shape"\r
+msgstr "Construye forma de área"\r
+\r
+#: Cura/util/profile.py:529\r
+msgid "The shape of machine build area."\r
+msgstr "La forma del área de construcción de la máquina."\r
+\r
+#: Cura/util/profile.py:531\r
+msgid ""\r
+"If you have an heated bed, this enabled heated bed settings (requires "\r
+"restart)"\r
+msgstr ""\r
+"Si tienes una cama caliente, activalo para tener los ajustes (requiere "\r
+"reinicio)"\r
+\r
+#: Cura/util/profile.py:532\r
+msgid "GCode Flavor"\r
+msgstr "GCode Flavor"\r
+\r
+#: Cura/util/profile.py:532\r
+msgid ""\r
+"Flavor of generated GCode.\n"\r
+"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
+"UltiGCode is a variation of the RepRap GCode which puts more settings in the "\r
+"machine instead of the slicer.\n"\r
+"MakerBot GCode has a few changes in the way GCode is generated, but still "\r
+"requires MakerWare to generate to X3G.\n"\r
+"BFB style generates RPM based code.\n"\r
+"Mach3 uses A,B,C instead of E for extruders."\r
+msgstr ""\r
+"Estilo de GCode.\n"\r
+"Impresoras RepRap suelen usar 5D Gcode (firmwares Marlin y Sprinter).\n"\r
+"UltiGcode es una variación del código RepRap con mas ajustes en la máquina."\r
+\r
+#: Cura/util/profile.py:533\r
+msgid "Extruder count"\r
+msgstr "Numero extrusores"\r
+\r
+#: Cura/util/profile.py:533\r
+msgid "Amount of extruders in your machine."\r
+msgstr "Cantidad de extrusores en tu máquina"\r
+\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
+msgid "Offset X"\r
+msgstr "Desplazamiento X"\r
+\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
+msgid "The offset of your secondary extruder compared to the primary."\r
+msgstr "La distancia del segundo extrusor relativa al primero."\r
+\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
+msgid "Offset Y"\r
+msgstr "Desplazamiento Y"\r
+\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
+msgid "The offset of your tertiary extruder compared to the primary."\r
+msgstr "La distancia del tercer extrusor relativa al primero."\r
+\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
+msgid "The offset of your forth extruder compared to the primary."\r
+msgstr "La distancia del cuarto extrusor relativa al primero"\r
+\r
+#: Cura/util/profile.py:542\r
+msgid "E-Steps per 1mm filament"\r
+msgstr "Pasos extrusor por 1 mm de filamento"\r
+\r
+#: Cura/util/profile.py:542\r
+msgid ""\r
+"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
+"ignored and the value in your firmware is used."\r
+msgstr ""\r
+"Cantidad de pasos por mm de filamento extruido. Si pones 0 este valor será "\r
+"ignorado y se cogerá el valor del firmware"\r
+\r
+#: Cura/util/profile.py:543\r
+msgid "Serial port"\r
+msgstr "Puerto Serial"\r
+\r
+#: Cura/util/profile.py:543\r
+msgid "Serial port to use for communication with the printer"\r
+msgstr "Puerto Serie para comunicarse con la impresora"\r
+\r
+#: Cura/util/profile.py:545\r
+msgid "Baudrate"\r
+msgstr "Velocidad"\r
+\r
+#: Cura/util/profile.py:545\r
+msgid ""\r
+"Speed of the serial port communication\n"\r
+"Needs to match your firmware settings\n"\r
+"Common values are 250000, 115200, 57600"\r
+msgstr ""\r
+"Velocidad del puerto serie\n"\r
+"Es necesario que coincida con la del firmware\n"\r
+"Valores habituales 250000, 115200, 57600"\r
+\r
+#: Cura/util/profile.py:548\r
+msgid "Head size towards X min (mm)"\r
+msgstr "Tamañano de la cabeza hacia X min (mm)"\r
+\r
+#: Cura/util/profile.py:548\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "\r
+"de la boquilla hacia la parte exterior del carro. 75 mm para una Ultimaker "\r
+"si el ventilador está en el lado izquierdo."\r
+\r
+#: Cura/util/profile.py:549\r
+msgid "Head size towards Y min (mm)"\r
+msgstr "Tamañano de la cabeza hacia Y min (mm)"\r
+\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "\r
+"de la boquilla hacia la parte exterior de la cabeza. 18 mm para una "\r
+"Ultimaker si el ventilador está en el lado izquierdo."\r
+\r
+#: Cura/util/profile.py:550\r
+msgid "Head size towards X max (mm)"\r
+msgstr "Tamañano de la cabeza hacia X max (mm)"\r
+\r
+#: Cura/util/profile.py:551\r
+msgid "Head size towards Y max (mm)"\r
+msgstr "Tamañano de la cabeza hacia Y max (mm)"\r
+\r
+#: Cura/util/profile.py:551\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"El tamaño de la cabeza al imprimir múltiples objetos, medida desde la punta "\r
+"de la boquilla hacia la parte exterior de la cabeza. 35mm para una Ultimaker "\r
+"si el ventilador está en el lado izquierdo."\r
+\r
+#: Cura/util/profile.py:552\r
+msgid "Printer gantry height (mm)"\r
+msgstr "Altura pórtico (gantry) de la impresora (mm)"\r
+\r
+#: Cura/util/profile.py:552\r
+msgid ""\r
+"The height of the gantry holding up the printer head. If an object is higher "\r
+"then this then you cannot print multiple objects one for one. 60mm for an "\r
+"Ultimaker."\r
+msgstr ""\r
+"La altura del carro que soporta el cabezal de la impresora. Si un objeto es "\r
+"más alto que esto, entonces no puede imprimirse varios objetos uno a uno. "\r
+"60 mm para un Ultimaker."\r
+\r
+#: Cura/util/profile.py:554\r
+#, python-format\r
+msgid "More flow than 150% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:555\r
+#, python-format\r
+msgid "Less flow than 50% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:556\r
+#, python-format\r
+msgid ""\r
+"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
+"are not recommended."\r
+msgstr ""\r
+"Capas más finas que %.2fmm (80%% del diámetro de la boquilla) usualmente dan "\r
+"malos resultados y no son recomendables."\r
+\r
+#: Cura/util/profile.py:558\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a printing speed above "\r
+"150mm/s"\r
+msgstr ""\r
+"Es muy poco probable que su máquina puede alcanzar una velocidad de "\r
+"impresión por encima de 150 mm/s"\r
+\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
+msgid "Temperatures above 260C could damage your machine, be careful!"\r
+msgstr "Temperaturas por encima de 260C puede dañar tu impresora, ¡CUIDADO!"\r
+\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
+msgid ""\r
+"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
+"1.75mm."\r
+msgstr ""\r
+"¿Estás seguro del grosor? Normalmente los filamentos son de 3mm o 1.75mm."\r
+\r
+#: Cura/util/profile.py:575\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a travel speed above "\r
+"300mm/s"\r
+msgstr ""\r
+"Es muy poco probable que su máquina puede alcanzar una velocidad de "\r
+"desplazamiento por encima de 300 mm/s"\r
+\r
+#: Cura/util/profile.py:576\r
+#, python-format\r
+msgid ""\r
+"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
+"results and is not recommended."\r
+msgstr ""\r
+"Una capa final de mas de %.2fmm (3/4 del tamaño del cabezal) usualmente da "\r
+"malos resultados y no es recomendable."\r
+\r
+#: Cura/util/sliceEngine.py:93\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr "%d minutos"\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr "%d hora %d minutos"\r
+\r
+#: Cura/util/sliceEngine.py:96\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr "%d hora %d minutos"\r
+\r
+#: Cura/util/sliceEngine.py:101\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr "%0.2f metros %0.0f gramos"\r
+\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Copiar perfil al portapapeles"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Impresión Alta calidad"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Calidad de impresión Normal"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Rapido impresión baja calidad"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Pared fina tipo taza o vaso"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Diametro:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Exterior solamente"\r
+\r
+#~ msgid "Run first run wizard..."\r
+#~ msgstr "Iniciar asistente inicial..."\r
+\r
+#~ msgid "* Configure Cura for your machine"\r
+#~ msgstr "Configura Cura para tu máquina"\r
+\r
+#~ msgid "* Optionally upgrade your firmware"\r
+#~ msgstr "Opcionalmente actualiza tu firmware"\r
+\r
+#~ msgid "* Optionally check if your machine is working safely"\r
+#~ msgstr "Opcionalmente márcalo si tu máquina trabaja bien"\r
+\r
+#~ msgid "* Optionally level your printer bed"\r
+#~ msgstr "Opcionalmente nivela tu cama caliente"\r
+\r
+#~ msgid "Statistics"\r
+#~ msgstr "Estadisticas"\r
+\r
+#~ msgid ""\r
+#~ "Filament: ####.##m #.##g\n"\r
+#~ "Estimated print time: #####:##\n"\r
+#~ "Machine state:\n"\r
+#~ "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"\r
+#~ msgstr ""\r
+#~ "Filamento: ####.##m #.##g\n"\r
+#~ "Tiempo estimado de impresión: #####:##\n"\r
+#~ "Estado máquina:\n"\r
+#~ "Detectando velocidadXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"\r
+\r
+#~ msgid "BedTemp:"\r
+#~ msgstr "Temp CamaCaliente"\r
+\r
+#~ msgid "Temp:"\r
+#~ msgstr "Temperatura:"\r
+\r
+#~ msgid "Jog"\r
+#~ msgstr "Jog"\r
+\r
+#~ msgid "Outer wall:"\r
+#~ msgstr "Capa exterior:"\r
+\r
+#~ msgid "Inner wall:"\r
+#~ msgstr "Capa interior:"\r
+\r
+#~ msgid "Fill:"\r
+#~ msgstr "Relleno:"\r
+\r
+#~ msgid "Support:"\r
+#~ msgstr "Soportes:"\r
+\r
+#~ msgid "Term"\r
+#~ msgstr "Terminal"\r
+\r
+#~ msgid "Enable timelapse movie recording"\r
+#~ msgstr "Habilitar grabación de timelapse"\r
+\r
+#~ msgid "Show preview"\r
+#~ msgstr "Mostrar previo"\r
+\r
+#~ msgid "Camera"\r
+#~ msgstr "Camara"\r
+\r
+#~ msgid "Loading gcode...\n"\r
+#~ msgstr "Cargar gcode...\n"\r
+\r
+#~ msgid "Filament: %(amount).2fm %(weight).2fg\n"\r
+#~ msgstr "Filamento: %(amount).2fm %(weight).2fg\n"\r
+\r
+#~ msgid "Filament cost: %s\n"\r
+#~ msgstr "Coste Filamento: %s\n"\r
+\r
+#~ msgid "Cura - Batch run"\r
+#~ msgstr "Cura - Procesando lote"\r
+\r
+#~ msgid "Add"\r
+#~ msgstr "Añadir"\r
+\r
+#~ msgid "Remove"\r
+#~ msgstr "Remover"\r
+\r
+#~ msgid "Prepare all"\r
+#~ msgstr "Preparar todo"\r
+\r
+#~ msgid "Open file to batch prepare"\r
+#~ msgstr "Abrir fichero para preparar lote"\r
+\r
+#~ msgid "Building: %d "\r
+#~ msgstr "Construyendo: %d "\r
+\r
+#~ msgid "Done: 0/%d "\r
+#~ msgstr "Hecho: 0/%d "\r
+\r
+#~ msgid "Abort"\r
+#~ msgstr "Abortar"\r
+\r
+#~ msgid "Close"\r
+#~ msgstr "Cerrar"\r
+\r
+#~ msgid ""\r
+#~ "\n"\r
+#~ "Slicing took: %(hours)02d:%(minutes)02d"\r
+#~ msgstr ""\r
+#~ "\n"\r
+#~ "Fileteado tardó: %(hours)02d:%(minutes)02d"\r
+\r
+#~ msgid "Building: [%(index)d/%(size)d]"\r
+#~ msgstr "Construyendo: [%(index)d/%(size)d]"\r
+\r
+#~ msgid "Aborted by user."\r
+#~ msgstr "Abortado por el usuario"\r
+\r
+#~ msgid "Done %(index)d/%(size)d"\r
+#~ msgstr "Hecho %(index)d/%(size)d"\r
+\r
+#~ msgid "To SDCard"\r
+#~ msgstr "A SDCard"\r
+\r
+#~ msgid "Fan on layer number"\r
+#~ msgstr "Ventilador a partir de capa"\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2014-10-21 22:35+0100\n"\r
"Last-Translator: Jeremie FRANCOIS <jeremie.francois@gmail.com>\n"\r
"Language-Team: <LL@li.org>\n"\r
"Language: fr\n"\r
"X-Generator: Poedit 1.5.4\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
"Une nouvelle version de Cura est disponible, voulez-vous la télécharger?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Nouvelle version disponible"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Quel type d'imprimante Printrbot avez-vous:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
msgid "Other machine information"\r
msgstr "Autres profils d'imprimante"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Les profils de machines prédéfinis suivants sont disponibles"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
" ou si vous voulez un profil supplémentaire.\n"\r
"S'il vous plaît, signaler le à \"github issue tracker\"."\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr "Profil maison..."\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr "Cura prêt!"\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura est maintenant prêt à être utilisé."\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
msgid "Custom RepRap information"\r
msgstr "Information d'imprimante RepRap"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
"Les machines RepRap diffèrent beaucoup, et il n'y a pas\n"\r
"de configuration par défaut dans Cura pour chacune d'elles."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr "Verifiez le profil par défaut avant de l'exécuter sur votre machine."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Si vous souhaitez ajouter un profil par défaut pour\n"\r
"votre machine, faites une demande sur github. "\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Vous devez installer manuellement le firmware Marlin ou Sprinter"\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Nom de la machine"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Largeur de la machine (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Profondeur de la machine (mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Hauteur de la machine (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Diamètre de la buse (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "plateau chauffant"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Le centre du plateau est 0,0,0 (RoStock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Sélectionnez votre machine"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Quel type de machine avez-vous:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Autre (ex. RepRap, Makerbot, Witbox)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
msgstr ""\r
"La collectce d'information d'usage est anonyme; elle permet d'améliorer Cura."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"Cette option ne soummet PAS vos modèles en lignes et ne récupère "\r
"d'informations d'ordre privée."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Soummettre des informations d'usages anonymes:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Pour plus de détail voyez: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Choisissez les éléments mis à jour que vous avez"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"Ultimaker, Cura a besoin de connaître les mises à jours effectuées sur votre "\r
"machine."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Extrudeur mis à jour"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr "Plateau chauffant (kit)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "plateau chauffant (fait maison)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Double extrusion (expérimental) "\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"l'extrudeur mis à jour. Si vous ne l'avez pas, il est fortement\n"\r
"recommandé de le faire pour augmenter la fiabilité."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Cette mise à jour peut être achetée sur la boutique\n"\r
" en ligne d'Ultimaker, ou sur thingiverse (ref. thing:26094)"\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Mettre à jour le firmware d'Ultimaker"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"Ce logiciel embarqué contrôle les moteurs, régule les températures\n"\r
"et permet à l'imprimante de fonctionner. "\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"Le firmware fournis avec votre Ultimakers fonctionne, mais une\n"\r
"mise à jour donne de meilleures impressions ou facilite la calibration."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"firmware aura probablement besoin d'être mis à jour.\n"\r
"Vous allez pouvoir le faire maintenant."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Ne mettez pas à jour le firmware si:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* Vous avez une ancienne machine basée sur un ATMega1280 "\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr "* Vous avez fait votre propre plateau chauffant"\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Vous avez des changements particuliers dans le firmware"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr "Vérification de l'Ultimaker"\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Il est conseillé d'effectuer quelques tests préliminaires.\n"\r
"Vous pouvez les ignorer si vous savez comment fonctionne votre machine"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Lancer les tests"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Ignorer les tests"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Communication:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Temperature:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Butées de fin de course:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Montrer le journal d'erreur"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Connexion à la machine."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Refroidir avant le test de température."\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Test du module de chauffe et du capteur de température."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Vérifiez que les butées de fin de courses sont pressées"\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "ECHEC de mesure de la température!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Température de la tête d'impression: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Etat de la communication: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Impossible d'établir la communication avec l'imprimante."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Veuillez appuyer sur la butée X de gauche."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Veuillez appuyer sur la butée X de droite."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Veuillez appuyer sur la butée Y de devant."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Veuillez appuyer sur la butée Z du haut."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Veuillez appuyer sur la butée Y du fond."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Vérification terminée"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Veuillez appuyer sur la butée Z du bas."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr "Calibration de l'Ultimaker"\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "La calibration du nombre de pas par E requiert une action manuelle."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Veuillez d'abord retirer le filament de votre machine."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"Ensuite alignez le filament de façon à ce qu'il s'introduise\n"\r
"dans le système d'entrainement (ex.: en sortie du tube)."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "100mm de filament vont être déroulés"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Extrusion de 100mm de filament"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Maintenant, mesurez la longueur déroulée\n"\r
"(ce peut être différent de 100mm) "\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Sauvegarder"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Le calcul fournit la valeur de pas par E suivante:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "Vous pouvez répéter ces étapes pour une meilleure calibration. "\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Si vous avez du filament froid bloqué dans la tête,\n"\r
"appuyez sur le bouton de chauffe ci-dessous:"\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Température pour le retrait du filament"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"Erreur: de se connecter à la machine\n"\r
"Si ce problème persiste, essayer de reconnecter le cable USB"\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr "Ultimaker2"\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr "Merci pour votre achat d'une Ultimaker2!"\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura est maintenant prêt à être utilisé avec votre Ultimaker2"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr "Lulzbot TAZ/Mini"\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura est maintenant prêt à être utilisé avec votre Lulzbot."\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr "Assistant de configuration"\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
msgid "Bed leveling wizard"\r
msgstr "Assistant de réglage du plateau."\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Cet assistant va vous aider avec le réglage du plateau:"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
msgid "It will do the following steps"\r
msgstr "Il va faire les opérations suivantes"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr "* Déplacer la tête d'impression vers chaque coin"\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr "et vous laisser ajuster la distance du plateau à la buse"\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
"* Imprimer une ligne sur le pourtour du plateau pour vérifier son "\r
"horizontalité"\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
msgid "Connect to printer"\r
msgstr "Se connecter à l'imprimante"\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr "Reprendre"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr "Vers le haut 0.2 mm"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr "Vers le bas 0.2 mm"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr "Vers le haut 10 mm"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr "Vers le bas 10 mm"\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr "Retour à l'origine..."\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr "Déplacement de la tête vers le milieu au fond..."\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr "Déplacement de la tête vers le fond à gauche..."\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr "Déplacement de la tête vers le devant à droite..."\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr "Déplacement de la tête vers le fond à droite..."\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr "Mise en chauffe de l'imprimante..."\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr "Impression d'un carré sur le plateau à une hauteur de 0.3mm."\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"Ajustez la vis du devant à gauche du plateau\n"\r
"pour que la buse touche le plateau."\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"Ajustez la vis du fond du plateau\n"\r
"pour que la buse touche le plateau."\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"Ajustez la vis du fond à gauche du plateau\n"\r
"pour que la buse touche le plateau."\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"Ajustez la vis du fond à droite du plateau\n"\r
"pour que la buse touche le plateau."\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"Ajustez la vis du devant à droite du plateau\n"\r
"pour que la buse touche le plateau."\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr "Mise en chauffe de l'imprimante: %d/%d"\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
"La température est atteinte. Insérez un morceau de filament PLA dans "\r
"l'imprimante."\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
"Utilisez les boutons haut/bas pour bouger le plateau et ajuster le "\r
"contacteur de butée Z."\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
"Calibration terminée.\n"\r
"Les carrés sur le plateaux devraient se toucher chacun légèrement."\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
"Cet assistant va vous aider à calibrer les décalage des deux têtes de votre "\r
"imprimante"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr "Impression de la croix de calibration initiale"\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
"Veuillez mesurer la distance entre les lignes horizontales en millimètres."\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr "Impression des lignes fines de calibration."\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
"Indiquez le numéro de la ligne horizontale qui s'est déposée parfaitement "\r
"sur la précédente. Celle de devant correspond au numéro zéro."\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr "Calibration terminée. Les décalages sont %s %s"\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr "Veuillez charger les deux extrudeurs avec du filament PLA."\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr "Retour à l'origine, et mise en chauffe des deux extrudeurs."\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
"Veuillez mesurer la distance entre les lignes verticales, en millimètres."\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
"Indiquez le numéro de la ligne verticale qui s'est déposée parfaitement sur "\r
"la précédente. Celle de gauche correspond au numéro zéro."\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr "Assistant de décalage des têtes"\r
\r
msgid "Expert config"\r
msgstr "Configuration experte"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Désolé, mais Cura n'est pas livré avec un firmware par défault dédié à votre "\r
"machine."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Mise à jour du firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"ATmega2560.\n"\r
"Donc, mettre à jour votre RepRap avec Cura fonctionnera pas."\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Lecture du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Connexion à la machine..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Veuillez connecter l'imprimante à \n"\r
"votre ordinateur avec le câble USB."\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Aucune machine trouvée pour ce firmware\n"\r
"Est-elle connectée à votre PC? "\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Seriez-vous en train d'essayer d'installer un firmware UMO sur une UM2 ou UMO"\r
"+?"\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Seriez-vous en train d'essayer d'installer un firmware UM2 ou UMO+ sur une "\r
"UMO?"\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Téléchargement du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Teminé!\n"\r
"Firmware installé: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Echec d'écriture du firmware.\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Impossible de se connecter au programmateur.\n"\r
\r
msgid "Print...\tCTRL+P"\r
msgstr "Imprimer...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Sauver le GCode..."\r
\r
msgid "Save Profile..."\r
msgstr "Sauver le profil..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Profil depuis un GCode..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Réinitialiser le profil par défaut"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Préférences...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Réglages machine..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Modèles récents"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Profils récents"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Quitter"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Fichier"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Importer une carte Minecraft..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "Déboguer le PID..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
msgid "Auto Firmware Update..."\r
msgstr "Mise à jour du micro-logiciel (firmware)"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Copier le profil dans le bloc-note"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "Imprimer tous les objets à la fois"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "Imprimer une objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Outils"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Machine"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Basculer en mode simple..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Basculer en mode complet..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Configuration experte..."\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Assistant de mise a niveau du plateau..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Assistant de décalage des têtes..."\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Documentation en ligne..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Signaler un problème..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Vérification des mises à jour..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Ouvrir le site YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "A propos de Cura..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Aide"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Pour l'impression \"Une à la fois \", vous devez avoir entré la taille de la "\r
"tête d'impression dans les paramètres de la machine"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "Avertissement un objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Ajouter une nouvelle machine"\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "Installer le firmware Marlin par défaut"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Installer un firmware maison"\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Sélection du profil à charger"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Sélection du fichier GCode à utiliser"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Pas de profil trouvé dans le fichier GCode.\n"\r
"Cette option ne marche qu'avec les fichiers crées à partir de Cura 12.07. "\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Erreur de chargement du profil"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Sélection d'un profil à sauvegarder"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"A moins de l'avoir sauvegardé, tous les réglages actuels seront perdus!\n"\r
"Voulez-vous vraiment les réinitialiser?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Réinitialisation du profile"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Réinitialisation du profile"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Attention: installer un firmware maison ne garantit pas le bon "\r
"fonctionnement de votre machine et pourrait même l'endommager."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Sélection du firmware à mettre à jour"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Vous avez la dernière version de Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Excellent!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr "Simple"\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr "Avancé"\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Extensions"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Erreur: aucune extension sélectionnée"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
msgid "Preferences"\r
msgstr "Préférences..."\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "Fenêtre d'impression"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Couleurs"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Language"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Réglages du filament"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Réglages de Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Réglages de la machine"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Taille de la tête d'impression"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Extrudeur %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Réglages de la communication"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr "OK"\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
msgid "Add new machine"\r
msgstr "Ajouter une nouvelle machine"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
msgid "Remove machine"\r
msgstr "Sélectionnez votre machine"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr "Renommer la machine"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "La dernière configuration de machine ne peut pas être retirée"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Erreur de la machine"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr "Entrez un nouveau nom:"\r
\r
msgid "Connect"\r
msgstr "Connecter"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Imprimer"\r
\r
msgid "Error log"\r
msgstr "Journal d'erreur"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Charger"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Tourner"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Echelle"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Symétrie"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Réinitialiser"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Mettre à plat"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Au maximum"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Symétrie en X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Symétrie en Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Symétrie en Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Echelle X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Echelle Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Echelle Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Taille axe X (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Taille axe Y (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Taille axe Z (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Echelle uniforme"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Mode de visualisation"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normal"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Porte-à-faux"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Transparent"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Rayons X"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Couches"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Partager sur YouMagine"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Ouvrir un modèle 3D"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Sauver le modèle 3D"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "Imprimer avec %s"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Journal du trancheur..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Sauvegarder les instructions d'impression"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Le trancheur à rapporté ceci"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Journal du trancheur..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Combien de copies voulez vous?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Nombre de copies"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "Multiplier"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Centrer sur la plateforme"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Supprimer l'objet"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Multiplier l'objet"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Diviser l'objet en parties"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Assemblage pour la double extrusion "\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Supprimer tous les objets"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr " Réinitialiser les objets"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Supprimer tous les objets"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Enregistrer sur la carte SD"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
"Mode de vue porte-à-faux impossible par limitation d'OpenGL (support des "\r
"shaders). "\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Impression de haute qualité"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Impression de qualité normale"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Impression rapide de basse qualité"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Vase ou coupe à parois fines"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Impression de supports"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "Sélection d'un profil d'impression rapide"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Matériau:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Diamètre:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Autre:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Extérieur seulement"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "Hauteur (mm)"\r
msgid "Webcam error"\r
msgstr "Erreur de webcam"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Chargement des instruction d'impressions pour visualisation (%d%%)"\r
msgstr "Erreur de vue 3D"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Qualité"\r
\r
"C'est utilisé en combinaison avec le diamètre de la buse pour\n"\r
"définir le nombre et l'épaisseur des lignes périmétriques."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Rétraction"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Autoriser le retrait"\r
"Il est logique d'indiquer un multiple de l'épaisseur de couche, similaire à "\r
"l'épaisseur des murs précédemment."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Remplissage"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Taux de remplissage (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Vitesse et température"\r
\r
msgstr "Température d'impression (°C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Température (buse n°4)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Température (buse n°3)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Température du plateau (°C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Température souhaitée pour le plateau chauffant. Mettez 0 pour le configurer "\r
"manuellement."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "Aucun"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "En contact avec le plateau"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "Partout"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Support"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Type de support"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"même.\n"\r
"\"Aucun\" désactive les supports d'impression."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Bordure (brim)"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Radeau (raft)"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Type d'accroche au plateau"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"sous l'ensemble de l'objet qui compense aussi les défaut d'horizontalité.\n"\r
"Activer l'une ou l'autre de ces options désactive le contour \"skirt\"."\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "Les deux"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "Premier extrudeur"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "Second extrudeur"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Support double extrusion"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"lequel utiliser (cela créera plus de changement d'extrudeur).\n"\r
"Vous pouvez aussi utiliser le second extrudeur pour un support soluble. "\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "Double extrusion"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr "Tour de purge"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"L'ancienne buse passe sur le dessus de la tour pour y être nettoyée, avant "\r
"que l'autre buse ne soit utilisée."\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "Volume de la tour de purge (mm3)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"Cela signifie aussi que plus les couches seront minces, plus votre tour "\r
"s'épaissira."\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "Bavette"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"Elle se charge d'attraper les bavures de la buse qui n'est pas utilisé lors "\r
"d'une double extrusion."\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Filament"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Diamètre (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"Une valeur plus grande donnera moins d'extrusion, une valeur plus petite "\r
"donnera plus d'extrusion."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Diamètre 2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diamètre du filament dédié au deuxième extrudeur (mettre zéro pour un "\r
"diamètre identique au premier)."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Diamètre 3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diamètre du filament dédié au troisième extrudeur (mettre zéro pour un "\r
"diamètre identique au premier)."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Diamètre 4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diamètre du filament dédié au quatrième extrudeur (mettre zéro pour un "\r
"diamètre identique au premier)."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Diamètre (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diamètre du filament dédié au troisième extrudeur (mettre zéro pour un "\r
+"diamètre identique au premier)."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Débit (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Ce paramètre permet de compenser un débit imparfait. La quantité de matière "\r
"extrudée est simplement multipliée par ce ratio."\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Rétraction"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Vitesse (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"donne de meilleurs résultats, mais une trop grande vitesse peut déraper ou "\r
"bien ronger le filament. "\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Longueur (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"Longueur de la rétraction, mettez 0 si vous ne souhaitez pas de retrait. Une "\r
"valeur de 4.5mm semble donner de bons résultats."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Retrait sur changement d'extrudeur (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"Longueur de rétraction lors d'un changement d'extrudeur. Zéro pour "\r
"désactiver. Une valeur de 16.0mm donne de bon résultats."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Distance minimum (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Distance minimale pour autoriser une rétractions. Évite d'effectuer un grand "\r
"nombre de retraits sur de petites zones."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Activer les détours"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Cette option active les détours afin d'éviter de survoler les zones non "\r
"imprimées. Sans cela, la tête se déplace en ligne droite et déclenchera un "\r
"retrait. "\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Extrusion minimale avant rétraction (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"Cela permet d'éviter un grand nombre de retraits qui peuvent abîmer le "\r
"filament."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "Sauter sur rétraction (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"l'impression. Une valeur de 0,075 fonctionne bien. Cette fonction a beaucoup "\r
"d'effets positif sur les imprimantes de type \"delta\"."\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Épaisseur de la première couche (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"Une première couche épaisse améliore l'adhérence sur le plateau. Mettez zéro "\r
"pour utiliser la même valeur que l'épaisseur principale des couches. "\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr "Épaisseur de ligne pour la première couche (mm)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"Un facteur d'épaississement du trait pour la première couche. Utile sur "\r
"certaines imprimantes pour obtenir une meilleure adhérence."\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Découpe inférieure (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"Permet de compenser les objets qui n'ont pas un fond assez plat pour "\r
"permettre une première couche suffisante."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Chevauchement pour la double extrusion (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"Ajoute un chevauchement réglable pour les impressions en double extrusion, "\r
"pour mieux souder les matières ensemble."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Vitesse"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Vitesse de positionnement (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"Vitesse de déplacement lorsque la tête n'imprime pas. Une Ultimaker bien "\r
"configurée peut atteindre 250mm/s."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Vitesse de la première couche (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Vitesse d'impression pour la première couche. Il est conseillé de l'imprimer "\r
"lentement pour améliorer l'adhérence au plateau."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Vitesse de remplissage (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"sensiblement le temps d'impression global, mais cela peut impacter la "\r
"qualité."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Vitesse de la première couche (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Vitesse à laquelle l'impression de l'intérieur s'effectue. Zéro pour la même "\r
+"vitesse que l'extérieur. Imprimer l'intérieur rapidement permet de réduire "\r
+"sensiblement le temps d'impression global, mais cela peut impacter la "\r
+"qualité."\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Vitesse d'impression de la coque externe (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"cette vitesse correspondra à la vitesse d'impression. Imprimer la coque "\r
"extérieure à une vitesse lente permet d'augmenter la qualité finale."\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Vitesse d'impression de la coque interne (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"l'intérieur rapidement réduit le temps d'impression mais peut impacter la "\r
"qualité."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Refroidissement"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Temps minimum par couche (sec) "\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"refroidir. Si la couche suivante est déposée trop vite, l'imprimante "\r
"ralentira pour garantir ce temps."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Activer le ventilateur"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Active le ventilateur durant l'impression. C'est souvent nécessaire lors "\r
"d'impressions rapides, mais cela dépend aussi du matériau imprimé."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Nombre de tours"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"Spécifiez zéro pour désactiver la jupe. Plusieurs tours aident pour les "\r
"petits objets ou pour les extrusions difficiles. "\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Distance de la jupe (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"Il s'agit de la distance minimale: les lignes additionnelles sont déposées "\r
"en s'éloignant."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Longueur minimale de la jupe (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"Si le nombre de ligne de contour est réglé à zéro, cette option n'aura aucun "\r
"effet. "\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "Hauteur pour ventilation maximale (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"La hauteur à laquelle les ventilateurs tournent à 100%. Pour les couches "\r
"précédentes, la vitesse des ventilateurs augmente au fur et à mesure."\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Vitesse minimale des ventilateurs (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"le maximum. La valeur minimale est utilisée lorsque l'impression de la "\r
"couche n'est pas volontairement ralentie."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Vitesse maximale des ventilateurs (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"le maximum. La valeur maximale est utilisée lorsque l'impression de la "\r
"couche est ralentie de plus de 200%."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Vitesse minimum (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"le filament goutte sur l'impression. Cette valeur permet d'imposer une "\r
"vitesse absolue minimum pour éviter ce problème."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Lever la tête pour refroidir"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"atteint. Cela évite de rester en contact et faire fondre la couche déposée "\r
"précédemment."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Remplissage"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Remplir le dessus"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"Crée une surface pleine sur la partie supérieure de l'objet. Cette option "\r
"peut devenir contre-productive pour certains vases ou coupes."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Remplir le dessous"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Crée une surface pleine sur la partie inférieure de l'objet. A désactiver "\r
"pour certains objets comme les bâtiments. "\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Taux de chevauchement (%) "\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"parois, afin d'assurer une soudure suffisante pour que les deux soient "\r
"solidement connectés."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "Type de support"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"l'autre. Plus fastidieux mais plus facile a imprimer, et mieux adaptés aux "\r
"structures complexes."\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "Angle minimal pour les supports (deg)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
#, fuzzy\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"L'angle minimum de porte-à-faux à partir duquel Cura génère des supports sur "\r
"la structure. Entre zéro (horizontal), et 90 (vertical)."\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Taux de remplissage (%s)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"matériau pour un support plus facile à enlever mais moins solide. 15% semble "\r
"être un bon compromis."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Éloignement horizontal (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"Distance entre le support et l'objet lui-même dans le plan horizontal.Une "\r
"distance de 0.7 mm est une bonne valeur pour ne pas trop se souder à l'objet."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Éloignement vertical (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"détacher plus facilement mais au détriment de la qualité de l'impression.\n"\r
"Un intervalle 0.15mm donne de bons résultats "\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "Spiraliser le contour extérieur"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"La hauteur n'est alors plus discontinue, et l'objet est imprimé en une "\r
"surface unie, avec un fond solide."\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr "Ne traiter que la surface"\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
"Ne suivre que les surfaces du modèle 3D, ne rien faire d'autre: pas de "\r
"remplissage, ni de fermeture dessus ou dessous."\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Nombre de lignes de bordure"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"adhérence de la pièce au plateau si vous l'augmentez mais cela réduit la "\r
"zone d'impression possible."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Marge supplémentaireu (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"\"). Cela à le même effet que pour la bordure: meilleure adhésion, réduction "\r
"de la surface d'impression possible."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Espacement des lignes (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr "Distance entre les lignes utilisées pour imprimer le radeau."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Épaisseur de la couche de base (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr ""\r
"Épaisseur de la première couche lorsque le radeau est utilisé (\"raft\")"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Largeur des lignes de base (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr "Largeur des lignes utilisées pour la première couche de la grille."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Épaisseur de l'interface (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
"Épaisseur de la couche qui fait l'interface entre le radeau et le dessous de "\r
"l'objet."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Largeur des lignes de l'interface (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
"C'est l'épaisseur des lignes utilisées dans l'interface entre le radeau et "\r
"l'objet à imprimer."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr "Espace vide"\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
#, fuzzy\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"d'impression. Un petit espace de 0.2mm marche très bien avec du PLA et "\r
"permet de décoller aisément le radeau à la fin."\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr "Couches de surface du radeau"\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
"remplies, et le modèle est imprimé sur elles. Permet d'éviter l'effet "\r
"rugueux sur le bas du modèle imprimé."\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Épaisseur de la première couche (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Largeur des lignes de l'interface (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Réparer les problèmes"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Combiner l'ensemble (option A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"cavités. L'option B ignore toutes les cavités et ne conserve que les formes "\r
"externes de chaque couche."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Combiner l'ensemble (option B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Conserver les faces ouvertes "\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"permet de trancher certains modèles irréparables sinon.\n"\r
"De même que l'option \"Réparer les problèmes\", les résultats peuvent varier."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Combler les défauts de structure"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
" De même que l'option \"Réparer les problèmes\", les résultats peuvent "\r
"varier."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Sauver le profil lors du tranchage"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"Après tranchage, sauvegarder le profil sous le nom [stl_file]_profile.ini, à "\r
"côté du fichier STL du modèle. "\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Prix (prix/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
"Prix du filament au kilogramme, pour estimer le coût total de l'objet "\r
"imprimé."\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Coût (prix/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
"Prix du filament au mètre, pour estimer le prix total de l'objet imprimé."\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Détecter automatiquement les cartes SD"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"désactivable pour les systèmes qui reconnaissent abusivement les clefs USB "\r
"comme s'il s'agissait de cartes mémoires."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Vérification des mises à jour"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Vérification des nouvelles versions de Cura au démarrage"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Contribuer aux statistiques"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Envoi de statistiques d'usage, anonymes, dans le but d'améliorer les "\r
"prochaines versions de Cura."\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Densité (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"l'ABS. Cette valeur permet d'estimer le poids total, et le prix éventuel de "\r
"l'objet."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
"Changer la langue de l'interface. Ce changement ne sera effectif qu'après "\r
"avoir redémarré Cura."\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Couleur du modèle"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "Couleur d'affichage du première extrudeur"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Couleur du modèle (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "Couleur d'affichage du deuxième extrudeur"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Couleur du modèle (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "Couleur d'affichage pour le troisième extrudeur"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Couleur du modèle (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "Couleur d'affichage du quatrième extrudeur"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "Modèle de fenêtre d'impression"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "Sélectionnez l'interface à utiliser pour imprimer directement en USB"\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Largeur imprimable (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Taille de la machine en mm"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Profondeur imprimable (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Hauteur imprimable (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "Origine au centre de la plate-forme"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
"Si le micro-logiciel (firmware) de l'imprimante place l'origine (0,0) au "\r
"centre du plateau au lieu du du coin avant gauche."\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "Forme du plateau"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "La forme du plateau d'impression, selon l'imprimante."\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Si vous avez un plateau chauffant, cela active les options correspondantes "\r
"(Cura doit être redémarré)."\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "Format de GCode"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"BFB génère un code basé sur RPM.\n"\r
"Mach3 utilise A,B,C à la place de E pour les extrudeurs."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Nombre d'extrudeurs"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Le nombre de têtes d'extrusion installées sur votre machine."\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "Décalage X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "Le décalage en X du second extrudeur par rapport au premier."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Décalage Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "Le décalage en X du troisième extrudeur par rapport au premier."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "Le décalage en X du quatrième extrudeur par rapport au premier."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "Nombre de pas \"E\" pour 1mm de filament"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Si sa valeur est laissée à zéro, alors c'est la valeur stockée dans le micro-"\r
"logiciel de l'imprimante qui sera utilisée."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Port série"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Le port série à utiliser pour communiquer avec l'imprimante."\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Bauds"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Elle doit correspondre à celle de votre micro-logiciel\n"\r
"Les valeurs les plus courantes sont 250000, 115200 ou 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Taille de la tête vers le X min (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"La distance est donnée depuis la buse vers l'extérieur de la tête (75mm pour "\r
"une Ultimaker avec le ventilateur à gauche)."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Taille de la tête vers le Y min (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"La distance est donnée depuis la buse vers l'extérieur de la tête (18mm pour "\r
"une Ultimaker avec le ventilateur à gauche)."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Taille de la tête vers le X max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Taille de la tête vers le Y max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"La distance est donnée depuis la buse vers l'extérieur de la tête (35mm pour "\r
"une Ultimaker avec le ventilateur à gauche)."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Hauteur de la tête (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"d'imprimer plusieurs objets l'un après l'autre (il seront imprimés en "\r
"simultanés). 60mm pour une Ultimaker."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr "Un ratio d'extrusion supérieur à 150%% est rare et peu recommandable."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr "Un ratio d'extrusion inférieur à 150%% est rare et peu recommandable."\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"Des épaisseurs de couche supérieures à %.2fmm (80%% du diamètre de la buse) "\r
"donneront généralement de mauvais résultats. Ce n'est pas recommandé."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr ""\r
"Il est peu probable que votre machine puisse imprimer au delà de 150mm/s."\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
"Une température supérieure à 260°C peut endommager votre machine. Soyez "\r
"prudents!"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"Êtes-vous certain que votre filament est aussi épais? Les filaments "\r
"habituels ont des diamètres d'environ 3mm ou 1.75mm."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
"Il est peu probable que votre machine puisse atteindre des vitesses de "\r
"déplacement supérieures à 300mm/s"\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr "%0.2f mètres %0.0f grammes"\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Copier le profil dans le bloc-note"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Impression de haute qualité"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Impression de qualité normale"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Impression rapide de basse qualité"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Vase ou coupe à parois fines"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Diamètre:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Extérieur seulement"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Assistant de première utilisation..."\r
\r
msgstr ""\r
"Project-Id-Version: Cura Translation\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2015-01-07 17:30+0900\n"\r
"Last-Translator: Jinbuhm Kim <Jinbuhm.Kim@gmail.com>\n"\r
"Language-Team: Korean <Jinbuhm.Kim@gmail.com>\n"\r
"Language: ko_KR\n"\r
"X-Poedit-SourceCharset: UTF-8\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "새로운 버젼의 큐라가 있습니다. 다운로드하시겠습니까?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "새로운 버젼이 있습니다."\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "어떤 Printrbot을 가지고 있는지 선택하세요:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
msgid "Other machine information"\r
msgstr "다른 기기 정보"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "다음의 미리 정의된 기기 프로파일들이 사용가능합니다."\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"만약 미리 정의된 프로파일에 문제가 발견이 되거나 추가적인 프로파일을 원하면\n"\r
"github의 이슈 트래커에 신고를 해주세요."\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr "사용자 정의..."\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr "큐라 사용 가능합니다!"\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "큐라를 사용할 준비가 되었습니다!"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
msgid "Custom RepRap information"\r
msgstr "커스텀 RepRap 정보"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
"RepRap 기기들은 많이 다를 수 있기 때문에 여기에서 자신만의 설정을 할 수 있습"\r
"니다."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr "기기에 실행하기전에 기본 프로파일을 검토해야 합니다."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"당신이 추가한 기기에 기본 프로파일이 맞다면 \n"\r
"github에 이슈를 남기십시요."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Marlin이나 Sprinter 펌웨어를 수동으로 설치를 해야만 합니다."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "기기 이름"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "기기 폭 (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "기기 길이(mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "기기 높이(mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "노즐 사이즈(mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "히팅 베드"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "베드의 중심은 0,0,0 (Rosock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "기기를 선택하세요"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "어떤 기기를 가지고 있나요:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "그 외(예: RepRap, MakerBot, Witbox)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
msgstr "익명의 사용정보의 수집은 큐라의 향상에 도움이 됩니다."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"이것은 당신의 모델을 온라인에 보내거나 프라이버시와 관계된 정보를 모으지 않습"\r
"니다."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "익명으로 사용 정보를 보내기:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "더 자세한 정보 보기: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "업그레이드된 부품을 선택하기"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"Ultimaker의 더 나은 설정을 위해\n"\r
"큐라는 당신의 기기에 어떤 업그레이드를 했는지 알고 싶습니다."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "익스투루더 드라이브 업그레이드"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
msgid "Heated printer bed (kit)"\r
msgstr "히팅 프린터 베드 (키트)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "히팅 프린터 베드 (자작)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "이중 압출 (실험)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"당신은 업그레이된 익스투루더 드라이브를 가지고 있습니다. \n"\r
"만약 이것이 없다면 신뢰성을 향상시키기를 추천합니다."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"이 업그레이드는 Ultimaker 웹샵에서 구매하거나 \n"\r
"thingiverse(26094)에서 찾을 수 있습니다."\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Ultimaker 펌웨어 업그레이드"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"펌웨어는 스텝모터와 온도를 제어하고 \n"\r
"궁극적으로 프린터를 동작하게 만듭니다."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"새로운 Ultimaker에 저장되어 있는 펌웨어도 동작하지만\n"\r
"업그레이드는 더 나은 프린트와 쉬운 보정을 가능하게 합니다. "\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"펌웨어는 업그레이드 돼야 합니다. \n"\r
"당신은 이제 그렇게 할 수 있는 기회를 가질 겁니다."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "만약 다음 사항에 해당이 되면 이 펌웨어를 업그레이드 하지 마십시요:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr ""\r
"* 당신은 ATMega1280 (Rev 1 기기)에 기반한 오래된 기기를 가지고 있습니다"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr "* 당신의 히팅베드를 만드세요"\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* 펌웨어에 다른 변경사항을 가지고 있습니다"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr "Ultimaker 검사"\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"만약 당신의 기기가 제대로 동작한다고 알고 있다면 이 과정을 건너뛸 수 있습니"\r
"다."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "체크 실행 "\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "체크 건너뛰기 "\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "통신:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "온도:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "엔드스탑:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "에러 기록 보기"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "기기에 연결합니다."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "온도 체크전 온도내리기 "\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "히터 및 온도센서 체크중."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "엔드스탑이 눌러지지 않았는지 확인하세요."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "온도 측정 실패!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "헤드 온도:%d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "통신 상태:%s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "프린터와 연결 실패."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "왼쪽 X축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "오른쪽 X축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "앞쪽 Y축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "상단 Z축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "뒷쪽 Y축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "체크가 끝났습니다."\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "하단 Z축 엔드스탑을 누르세요."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr "Ultimaker 캘리브레이션"\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Steps Per E 를 보정하는 것은 몇가지 수동작업이 필요합니다."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "먼저 필라멘트를 기기에서 제거하십시요."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"다음 필라멘트를 넣어서 팁이\n"\r
"익스투루더의 상단과 정렬이 되도록 하십시요."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "이제 필라멘트를 100mm 밀어 넣을 겁니다."\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "필라멘트100mm 압출"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"이제 압출된 필라멘트의 양을 측정하십시요:\n"\r
"(이것은 100mm 보다 많거나 적을 수 있습니다)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "저장 "\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "This results in the following steps per E:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "더 나은 보정을 위해 이 과정을 반복할 수 있습니다."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"제거해야할 필라멘트가 아직 프린터에 남아있다면\n"\r
"아래 가열 버튼을 누르세요:"\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "필라멘트 제거를 위해 가열"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"오류: 시리얼 포트를 여는데 실패했습니다\n"\r
"만약 이 현상이 계속되면 USB 케이블을 제거하고 다시 연결을 해보십시오"\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr "Ultimaker2"\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr "새로운 Ultimaker2의 구매를 축하합니다."\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Ultimaker2에 맞게 큐라를 사용할 준비가 되었습니다."\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr "Lulzbot TAZ/Mini"\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Lulzbot에 맞게 큐라를 사용할 준비가 되었습니다."\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr "설정 마법사"\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
msgid "Bed leveling wizard"\r
msgstr "베드 레벨링 마법사"\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "마법사가 프린터 베드의 레벨링을 도와줄 것입니다."\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
msgid "It will do the following steps"\r
msgstr "다음의 절차가 진행됩니다"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr "* 프린터 헤드를 각 코너로 이동"\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr "베드의 높이를 조절"\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr "* 레벨이 맞는지 베드 주변으로 라인을 출력"\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
msgid "Connect to printer"\r
msgstr "기기에 연결합니다"\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr "재가동"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr "위로 0.2mm"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr "아래로 0.2mm"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr "위로 10mm"\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr "아래로 0.2mm"\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr "프린터의 홈위치로..."\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr "헤드를 뒷면 중심으로 이동..."\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr "헤드를 뒷면 좌측 코너로 이동..."\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr "헤드를 앞면 우측 코너로 이동..."\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr "헤드를 뒷면 우측 코너로 이동..."\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr "프린터 가열중..."\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr "프린터베드에 0.3mm 높이로 정사각형 출력"\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"노즐이 베드에 닿도록\n"\r
"프린터 베드의 앞쪽 왼쪽 나사를 조절하세요."\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"노즐이 베드에 닿도록\n"\r
"프린터 베드의 뒤쪽 나사를 조절하세요."\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"노즐이 베드에 닿도록\n"\r
"프린터베드의 뒤쪽 왼쪽 나사를 조절하세요."\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"노즐이 베드에 닿도록\n"\r
"프린터베드의 뒤쪽 오른쪽 나사를 조절하세요."\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
"노즐이 베드에 닿도록\n"\r
"프린터베드의 앞쪽 오른쪽 나사를 조절하세요."\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr "프린터 가열: %d/%d"\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr "현재 프린터가 뜨겁습니다. 프린터에 PLA 필라멘트를 넣으세요."\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr "위/아래로 조정하는 버튼으로 베드를 움직여서 Z축 엔드스탑을 조정하세요."\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
"캘리브레이션이 끝났습니다.\n"\r
"베드위의 정사각형은 베드와 살짝 닿아야 합니다."\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "마법사가 프린터 헤드 옵셋의 조정을 도와줄 것입니다."\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr "캘리브레이션을 위한 십자 출력"\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr "수평선사이의 라인 간격을 밀리미터 단위로 측정하세요."\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr "캘리브레이션 라인 출력."\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr "어떤 수평 라인이 가장 위에 위치합니까? 맨 앞의 라인이 0입니다."\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr "캘리브레이션이 끝났습니다. 오프셋은: %s %s"\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr "양쪽 익스투루더에 PLA를 넣으세요."\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr "프린터를 홈 위치로 보내고 양쪽 익스투루더를 가열합니다."\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr "수직 라인간의 거리를 밀리미터 단위로 측정합니다."\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr "어떤 수직 라인이 가장 위에 위치합니까? 맨 왼쪽의 라인이 0입니다."\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr "헤드 옵셋 마법사"\r
\r
msgid "Expert config"\r
msgstr "전문가 설정"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr "죄송합니다, 큐라는 이 기기의 설정을 위한 기본 펌웨어가 없습니다."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "펌웨어 업데이트 "\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"큐라는 ATMega2560기반의 하드웨어의 펌웨어 업데이트만 지원합니다. \n"\r
"따라서 RepRap기반의 기기는 동작을 하지 않을 수도 있습니다."\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "확인"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "펌웨어 읽기..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "기기에 접속중..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"USB 케이블로 프린터와\n"\r
" 컴퓨터를 연결하시오."\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"펌웨어 업데이트를 위한 기기를 찾는데 실패\n"\r
"기기가 PC에 연결이 되어 있나요?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"이 펌웨어는 이 기기와 맞지 않습니다.\n"\r
"UM2나 UMO+에 UMO 펌웨어를 인스톨 했나요?"\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"이 펌웨어는 이 기기와 맞지 않습니다.\n"\r
"UMO에 UM2나 UMO+ 펌웨어를 인스톨 했나요?"\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "펌웨어 업로딩 중..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"완료!\n"\r
"설치된 펌웨어:%s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "펌웨어 쓰기 실패.\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
msgid "Failed to connect to programmer.\n"\r
msgstr "프로그래머 접속 실패.\n"\r
\r
msgid "Print...\tCTRL+P"\r
msgstr "프린트...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "GCode 저장하기..."\r
\r
msgid "Save Profile..."\r
msgstr "프로파일 저장하기..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "GCode로 부터 프로파일 가져오기..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "프로파일을 기본설정으로 리셋"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "환경설정...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "기기설정..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "최근에 사용한 모델 파일"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "최근에 사용한 프로파일 파일"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "종료하기"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "파일 "\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "마인크래프트 맵 가져오기..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "PID 디버거..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
msgid "Auto Firmware Update..."\r
msgstr "자동 펌웨어 업데이트..."\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "프로파일을 클립보드에 복사"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "한번에 모두 프린트하기"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "한번에 하나씩 프린트하기"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "툴"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "기기 "\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "빠른 프린터 설정으로 전환..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "자세한 설정으로 전환..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "전문가 설정 열기...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "베드 수평맞추기 마법사 실행..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "헤드 옵셋 마법사 실행..."\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "전문가 설정 "\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "온라인 문서..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "문제 리포트하기..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "업데이트 확인..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Yoymagine 웹사이트 열기..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "큐라에 관하여..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "도움말"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"\"한번에 하나씩\" 프린팅의 경우, 기기 설정에서 정확한 헤드 사이즈와 갠트리의 "\r
"높이를 입력해야 합니다."\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "한번에 하나씩 프린팅 경고"\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
msgid "Add new machine..."\r
msgstr "새로운 기기 추가..."\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "기본 펌웨어 설치..."\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "사용자 정의 펌웨어 설치..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "로드할 프로파일 파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "프로파일을 로드하기위해 gcode파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"GCode 파일에 프로파일 파일이 없음.\n"\r
"이 기능은 큐라 12.07이상에서 만들어진 GCode files만 동작합니다."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "프로파일 로드 에러"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "저장할 프로파일 파일 선택"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"현재 프로파일을 저장하지 않으면 모든 설정은 사라집니다 !\n"\r
"정말 리셋하기를 원하십니까?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "프로파일 리셋"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "프로파일 리셋"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"경고: 사용자 정의 펌웨어의 설치는 정상적인 동작을 보장하지 않으며 기기에 손상"\r
"을 줄 수 있습니다."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "업로드할 펌웨어 열기"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "최신 버젼의 큐라를 사용하고 있습니다 !"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "좋습니다!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr "기본"\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr "고급"\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "플러그인"\r
\r
msgid "Error: no plugin selected"\r
msgstr "오류: 플러그인이 선택되지 않음"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
msgid "Preferences"\r
msgstr "환경설정"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "프린트 윈도우 "\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "색상"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "언어"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "필라멘트 설정"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "큐라 설정"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "기기 설정"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "프린터 헤드 크기"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "익스투루더 %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "통신 설정"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr "확인"\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
msgid "Add new machine"\r
msgstr "새로운 기기 추가"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
msgid "Remove machine"\r
msgstr "프린터 제거"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
msgid "Change machine name"\r
msgstr "기기 이름 바꾸기"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "큐라에서 마지막 기기 설정을 제거할 수 없습니다"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "기기 제거 오류"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr "새로운 이름을 입력:"\r
\r
msgid "Connect"\r
msgstr "연결 "\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "프린트"\r
\r
msgid "Error log"\r
msgstr "오류 로그"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "불러오기"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "회전"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "크기조절"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "대칭"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "리셋"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "평면 배치"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "최대로 키우기"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "X 방향 대칭"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Y 방향 대칭"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Z 방향 대칭"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "X 방향 크기조절"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Y 방향 크기조절"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Z 방향 크기조절"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "X 사이즈(mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Y 사이즈(mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Z 사이즈(mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "균등하게 크기 조절"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "보기 모드"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "일반"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "돌출"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "투명"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "X-레이"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "레이어"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "YouMagine에 공유"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "3D 모델 열기 "\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "3D 모델 저장"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "%s 프린트"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "슬라이스 엔진 로그..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "툴패스 저장"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "슬라이스 엔진의 리포트는 다음과 같습니다"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "엔진 로그..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "몇 개를 출력하실 건가요?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "프린트할 갯수"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "곱하기"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "플팻폼 중앙에 위치"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "오브젝트 제거"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "오브젝트 복사"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "오브젝트 나누기"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "이중 압출 합치기"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "모든 오브젝트 제거"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr "모든 오브젝트 다시 불러오기"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "모든 오브젝트 제거"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "툴패스를 SD에 저장"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr "OpenGL 셰이더가 지원이되지 않아서 돌출 보기가 동작하지 않습니다."\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "고품질 프린트"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "일반 품질 프린트"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "빠른 저품질 프린트 "\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "얇은 벽으로된 컵이나 꽃병"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "서포트 프린트하기"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "퀵프린트 프로파일 선택:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "재질:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "지름:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "그 외:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "외부만"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "높이(mm)"\r
msgid "Webcam error"\r
msgstr "웹캠 오류"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "시각화를 위한 툴패스 불러오기 (%d%%)"\r
msgstr "3D 윈도우 오류"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "품질"\r
\r
"이것은 노즐 크기와 함께 사용되어\n"\r
"바깥 라인의 수와 두께를 정합니다."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "리트렉션"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "리트렉션 활성화"\r
"레이어 두께의 배수가 되도록 값을 지정하고, 균등하게 강하게 만들기 위해서 외벽"\r
"의 두께의 값에 비슷하게 정하십시오."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "채우기"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "채우기 밀도 (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "속도 및 온도"\r
\r
msgstr "프린팅 온도 (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "4번째 노즐 온도 (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "3번째 노즐 온도 (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "베드 온도 (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr "히팅 베드의 온도. 0에 예열값을 설정합니다."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "사용 안함"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "Touching buildplate"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "Everywhere"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "서포트"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "서포트 종류"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"다.\n"\r
"'모든 곳' 은 모델의 상단 부분에 서포트를 만듭니다."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Brim"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Raft"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr "Skirt"\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "플랫폼 고정 타입"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"터페이스를 추가합니다.\n"\r
"(Brim과 Raft를 활성화 하면 skirt가 비활성화 됩니다)"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "둘다"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "첫번째 익스투루더"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "두번째 익스투루더"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "듀얼 익스투루더 지원"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"익스투르더 교환을 빈번하게 합니다.\n"\r
"가용성 서포트 재질을 위해서 2번째 익스투루더를 사용할 수도 있습니다."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "이중 압출"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr "Wipe&prime tower"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"새로운 노즐이 두번째 색상을 인쇄하는 데 사용되기 전에 이전 노즐은 타워에서 닦"\r
"입니다."\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "레이어 당 Wipe&prime tower의 볼륨 (mm3)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"익스투루더가 동작되어서 어떠한 양을 압출하기를 원하기 때문입니다.\n"\r
"이것은 레이어가 얇을 수록 타워는 더 커진다는 것을 의미합니다."\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "우즈 쉴드"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"인 두께의 쉘입니다. \n"\r
"이 쉴드는 이중 압출에서 사용하지 않는 노즐로 부터 새어나오는 것을 잡습니다."\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "필라멘트"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "지름(mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"만약 이 값을 측정할 수 없으면 보정을 해야 하는데, 큰 값은 덜 압출이 되고 작"\r
"은 값은 더 많은 압출을 합니다."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "지름2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr "2번째 노즐의 지름. 0은 노즐 1과 같은 지름을 사용합니다."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "지름3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr "3번째 노즐의 지름. 0은 노즐 1과 같은 지름을 사용합니다."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "지름4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
msgstr "4번째 노즐의 지름. 0은 노즐 1과 같은 지름을 사용합니다."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "지름(mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr "3번째 노즐의 지름. 0은 노즐 1과 같은 지름을 사용합니다."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "압출량 (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
msgstr "압출량 보정, 압출된 재질의 양이 이 값의 배수로 곱해짐"\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "리트렉션"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"필라멘트가 후퇴되는 속도, 높은 리트렉션 속도가 더 잘 작동합니다. 그러나 매우 "\r
"높은 리트렉션 속도는 필라멘트가 연마될 수 있습니다."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "거리 (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"리트렉션 정도, 0으로 하면 리트렉션을 하지 않습니다. 4.4mm가 좋은 결과를 얻는 "\r
"것으로 보입니다."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "이중 압출 교환 양(mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"이중 압출기일때 노즐을 전환시 리트렉션 정도. 0으로 하면 리트렉션을 하지 않습"\r
"니다. 16.0mm의 값은 좋은 결과를 얻을 것으로 보입니다."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "최소 이동거리 (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"최소 이동을 위해서는 리트렉션이 일어나지 않아야 합니다. 작은 영역에서 빈번한 "\r
"리트렉션이 일어나는지 확인하십시요."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "combing 활성"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Combing은 헤드가 이동을 할 때 프린트에 있는 구멍을 피하는 행위입니다. "\r
"Combing이 비활성화 된 경우 프린터 헤드는 시작점에서 끝점까지 직선 이동하고 항"\r
"상 필라멘트 후퇴를 합니다."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "리트렉션 전 최소 압출 (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"이것은 동일한 부분에서 리트렉션이 많이 일어나서 필라멘트가 평평하게하거나 연"\r
"마되는 되는 문제를 방지합니다."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "리트렉션할 때 Z hop (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"리트렉션이 되면 헤드는 프린트물 위로 이동을 위해 이 양만큼 위로 올려집니다. "\r
"0.075 값이 잘 작동하며 이 기능은 델타 타워에서 좋은 영향을 가집니다."\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "첫번째 레이어 두께 (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"바닥면의 레이어 두께. 바닥 레이어의 두께가 두꺼울수록 베드에 쉽게 고정이 됩니"\r
"다. 0.0으로 설정하면 다른 레이어와 같은 두께입니다."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid "Initial layer line width (%)"\r
msgstr "첫번째 레이어 라인 두께 (%)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
msgstr ""\r
"어떤 프린터에서는 첫번째 레이어에 추가적인 폭을 주면 베드에 고정이 쉽습니다."\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "오브젝트 하단 자름 (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"오브젝트를 플랫폼에 박아넣습니다. 이것은 오브젝트가 평평한 바닥이 없을때 사용"\r
"되고 아주 작은 첫번째 레이어를 만듭니다."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "이중 압출 오버랩 (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"이중 압출 프린트를 할때 일정한 양의 겹치는 압출양을 추가합니다. 이것은 서로 "\r
"다른 색상이 함께 접착시킵니다."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "속도"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "이동 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"이동시 속도, 잘 설정돤 Ultimaker의 경우 250mm/s까지 가능하지만 어떤 기기들은 "\r
"스텝을 잃기도 합니다."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "바닥면 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"바닥면 프린트 속도, 첫번째 레이어의 프린트 속도를 느리게 해서 프린터 베드에 "\r
"더 잘 붙게 할 수 있습니다."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "채움 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"가 사용이 됩니다. 채우는 것을 빨리 프린팅하면 프린팅 시간을 많이 줄일 수 있지"\r
"만 프린트 질에는 나쁜 영향을 미칩니다."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "바닥면 속도 (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"채우는 부분이 프린트 되는 속도. 만약 0으로 설정하면 프린트 속도와 같은 속도"\r
+"가 사용이 됩니다. 채우는 것을 빨리 프린팅하면 프린팅 시간을 많이 줄일 수 있지"\r
+"만 프린트 질에는 나쁜 영향을 미칩니다."\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "바깥면 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"이 됩니다. 느리게 프린팅을 하면 표면의 질을 높입니다. 하지만 안쪽면을 프린트"\r
"하는 속도와 차이가 많이나면 프린트 질이 나빠집니다."\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "안쪽면 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"이 됩니다. 바깥면 보다 안쪽면을 더빨리 프린팅하면 프린팅 시간을 줄일 수 있습"\r
"니다. 내부를 채우는 속도와 바깥면을 프린팅하는 속도의 중간으로 하면 좋습니다."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "냉각"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "레이어당 최소시간 (sec)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"질 시간을 줍니다. 만약 레이어가 빨리 쌓여지면 프린터는 적어도 이 시간만큼을 "\r
"소비했는 지 확인합니다."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "쿨링팬 활성화"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
msgstr ""\r
"프린트중에 쿨링팬을 활성화하기. 쿨링팬은 빠른 프린트를 위해 필수적입니다."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr "Skirt"\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "라인 수"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
" 0으로 설정하면 스커트를 비활성화합니다. 다수의 스커트 라인은 압출기를 준비시"\r
"키는데 도움을 주어서 작은 오브젝트의 경우 더 좋습니다."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "시작 거리 (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"스커트와 첫번째 레이어의 거리.\n"\r
"이것은 최소 거리로 다수의 스커트 라인의 경우 이 거리 바깥쪽에 그려집니다."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "최소 길이 (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"합니다. \n"\r
"주의: 만약 라인수가 0이면 이것은 무시됩니다."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "최대 팬 속도일 때의 높이 (%)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"팬이 완전히 켜지는 높이. 이 아래의 레이어에서 팬의 속도는 비율에 따라 일정하"\r
"게 적어져서 레이어 0에서는 팬이 꺼집니다."\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "최소 팬 속도 (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"다. 만약 레이어가 쿨링 때문에 레이어가 빨리 완료되면 최소 팬 속도가 사용이 됩"\r
"니다."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "최대 팬 속도 (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"팬이 켜지면 이 속도 설정으로 가동되며 최소 속도와 최대 속도사이로 조정이 됩니"\r
"다. 만약 레이어가 빨리 완료되지 않으면 최대 팬 속도가 사용이 됩니다."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "최소 속도 (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"량은 이것을 막습니다. 프린트가 느려질지라도 이 최소 속도 보다는 더 느려지지 "\r
"않습니다."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "헤드 들기"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"만약 최소 속도가 되면 헤드를 올린다. 그리고 추가 시간 동안 기다려서 최소 레이"\r
"어 시간이 항상 만족되도록 한다."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "채우기"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "조밀한 상단 채움"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"상단면에 단단한 표면을 만듭니다. 만약 아니요로 설정을 하면 상단면은 퍼센트 단"\r
"위로 채웁니다. 컵/꽃병일 경우 유용합니다."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "조밀한 하단 채움"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"하단면에 단단한 표면을 만듭니다. 만약 아니요로 설정을 하면 하단면은 퍼센트 단"\r
"위로 채웁니다. 빌딩의 경우 유용합니다."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Infill 겹침 (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"벽과 채움사이에 겹쳐지는 양. 벽과 채워지는 것 사이에는 약간의 겹쳐지는 부분"\r
"이 있어서 벽이 충전재에 단단히 연결이 됩니다."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "스트럭쳐 종류"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"라인은 한번에 하나씩 떨어질 수 있는 하나의 벽으로된 선입니다. 제거하지 쉽지"\r
"만 덜 강하고 까다로운 프린트에는 잘 동작하지 않습니다."\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "서포트를 위한 돌출부 각도(deg)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"being horizontal and 0 degree being vertical."\r
msgstr ""\r
"돌출부가 서포트가 되기 위한 최소 각도. 0도는 수평이고 90도는 직각입니다."\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "채우는 양 (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"서포트 재질에 채우는 양, 재료가 적으면 서포트가 약해서 제거하기 쉽습니다. "\r
"15% 가 평균적으로 좋습니다."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "거리 X/Y (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"프린트로 부터 서포트 재질까지의 X/Y 방향으로의 거리.\n"\r
"프린트로 부터 0.7mm 가 괜찮은 거리로 서포트가 프린트에 붙지 않습니다."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "거리 Z (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"기 쉽게하지만 프린트의 모양이 약간 안좋게 합니다.\n"\r
"0.15mm이면 서포트 재질로 부터 쉽게 분리 할 수 있습니다."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr "Black Magic"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "외형 윤곽을 나선형으로 하기"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"을 가지고 하나의 벽으로된 출력물으로 만듭니다.\n"\r
"이 기능은 이전 버전에서는 Joris라고 불렸습니다."\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr "Only follow mesh surface"\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Brim line amount"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"Brim에 사용되는 라인의 수, 라인이 많이 사용되면 brim이 더 커지고 바닥에 더 "\r
"잘 붙습니다. 하지만 이것은 유효 프린트 면적을 줄어들게 합니다."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "추가 마진 (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"마진을 증가시키면 더 강한 raft를 만들고 재료가 더 많이 사용이 되고 프린트를 "\r
"위한 공간이 적어집니다."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "라인 간격 (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr "Raft를 사용을 하면 이것은 중심선과 raft선 사이의 거리입니다."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "베이스 두께 (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr "Raft를 사용을 하면 이것은 바닥에 깔리는 기본 레이어의 두께입니다."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "베이스 라인 폭 (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr "Raft를 사용을 하면 이것은 바닥에 깔리는 기본 레이어 라인의 폭입니다."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "인터페이스 두께 (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr ""\r
"Raft를 사용을 하면 이것은 바닥에 깔리는 인터페이스 레이어의 두께입니다."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "인터페이스 라인 두께 (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr ""\r
"Raft를 사용을 하면 이것은 바닥에 깔리는 인터페이스 레이어 라인의 폭입니다."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr "Airgap"\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr "Gap between the last layer of the raft the whole print."\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr "첫번째 레이어 Airgap"\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"첫번째 프린팅 레이어와 마지막 raft레이어 사이의 간격. PLA에서 0.2mm의 간격은 "\r
"raft를 쉽게 제거되게 합니다. 이 값은 Airgap 설정의 상위에 더해집니다."\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr "표면 레이어"\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
"Raft 위에 올라가는 표면 레이어의 양으로 프린팅될 모델의 내부가 전부 채워집니"\r
"다."\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Surface layer thickness (mm)"\r
msgstr "표면 레이어 두께 (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr "각 표면 레이어의 두께"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Surface layer line width (mm)"\r
msgstr "표면 레이어 라인 두께 (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr "각 표면 레이어의 라인두께"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Fix horrible"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Combine everything (Type-A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"지하려고합니다. 타입 B는 모든 내부 구멍을 무시하고 단지 레이어 별로 외부 형태"\r
"를 유지합니다."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Combine everything (Type-B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Keep open faces"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"모든 \"Fix horrible\" 옵션과 마찬가지로, 결과는 다를 수 있으며, 위험이 따릅니"\r
"다."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Extensive stitching"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"모든 \"Fix horrible\"옵션과 마찬가지로, 결과는 매우 다를 수 있으며 위험이 따"\r
"릅니다."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "프로파일을 슬라이스에 저장"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr "슬라이싱할때 프로파일을 모델 옆에 [stl_file]_profile.ini에 저장합니다."\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "비용 (가격/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr "최종 프린트의 가격을 예상하기 위한 필라멘트의 Kg당 비용"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "비용 (가격/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr "최종 프린트의 가격을 예상하기 위한 필라멘트의 미터당 비용"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "SD카드 자동 감지"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"SD 카드 자동 감지. 외장 하드 드라이브나 USB 메모리 스틱이 SD 카드로 인식이 "\r
"될 수 있기 때문에 일부 시스템에서는 이 기능을 사용 중지 할 수 있습니다."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "업데이트 확인"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "시작할 때 큐라의 새로운 버젼이 있는지 확인"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "사용 통계 보내기"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr "큐라의 다음 버젼의 향상을 위해 익명으로 사용 정보 보내기"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "밀도 (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"세제곱 미터당 필라멘트의 중량. PLA는 약 1240, ABS는 1040. 이 값은 프린트에 사"\r
"용된 필라멘트의 중량을 추정하기 위해 사용됩니다."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr ""\r
"큐라의 언어를 변경합니다. 언어를 변경하려면 큐라를 다시 시작해야 합니다."\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "모델 색상"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "1번째 익스투루더의 색상 표시 "\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "모델 색상 (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "2번째 익스투루더의 색상 표시 "\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "모델 색상 (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "3번째 익스투루더의 색상 표시 "\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "모델 색상 (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "4번째 익스투루더의 색상 표시 "\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "프린팅 윈도우 종류"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "USB 프린팅을 위한 인터페이스 선택"\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "최대 두께 (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "기기 크기(밀리미터)"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "최대 길이 (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "최대 높이 (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "기기 중심 0,0"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr ""\r
"기기의 펌웨어는 기기의 앞, 왼쪽 코너대신에 베드의 중심을 0,0으로 정의 합니다."\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "빌드 영역의 형상"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "기기의 빌드 영역의 모양"\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
msgstr ""\r
"히팅 베드가 있으면 이것은 히팅 베드 설정을 활성화합니다. (재시작 해야함)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "GCode 형태"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
"다.\n"\r
"Mach3는 익스투르더를 위해 E 대신에 A,B,C 를 사용합니다."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "익스투루더 갯수"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "기기의 익스투루더의 갯수"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "오프셋 X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "1번째로 부터 2번째 익스투루더의 오프셋"\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "오프셋 Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "1번째로부터 3번째 익스투루더의 오프셋"\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "1번째로 부터 4번째 익스투루더의 오프셋"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "1mm 필라멘트 당 E-Steps"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"1mm 필라멘트 압출 당 스텝의 수. 0으로 설정하면 이 값은 무시되고 펌웨어의 값"\r
"이 사용됩니다."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "시리얼 포트"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "프린터와 통신하는데 사용되는 시리얼 포트"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "보드레이트"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"펌웨어 설정과 일치해야 합니다\n"\r
"일반적인 값은 250000, 115200, 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "X min 방향으로의 헤드 크기 (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"복수의 오브젝트를 출력할때 노즐의 팁으로 부터 헤드의 바깥 부분쪽으로 측정된 "\r
"헤드의 크기. 만약 팬이 왼쪽에있는 경우 Ultimaker는 75mm."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Y min 방향으로의 헤드 크기 (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"복수의 오브젝트를 출력할때 노즐의 팁으로 부터 헤드의 바깥 부분쪽으로 측정된 "\r
"헤드의 크기. 만약 팬이 왼쪽에 있는 경우 Ultimaker는 18mm."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "X max 방향으로의 헤드 크기 (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Y max 방향으로의 헤드 크기 (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"복수의 오브젝트를 출력할때 노즐의 팁으로 부터 헤드의 바깥 부분쪽으로 측정된 "\r
"헤드의 크기. 만약 팬이 왼쪽에있는 경우 Ultimaker는 35mm."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "프린터 갠트리 높이 (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"프린터 헤드를 받치고 있는 갠트리의 높이. 먄약 오브젝트가 이것보다 높은 경우 "\r
"여러 오브젝트를 하나 하나를 인쇄 할 수 없습니다. Ultimaker는 60mm."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr "150% 이상의 압출량은 일반적이지 않고 사용하지 않는것이 좋습니다."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr "50% 이하의 압출량은 일반적이지 않고 사용하지 않는것이 좋습니다."\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"두꺼운 층 %.2fmm (80%% 노즐 크기)는 일반적으로 결과가 좋지 않고 사용하지 않"\r
"는 것이 좋습니다."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr "당신의 기기가 150mm/s 이상의 속도를 낼 가능성이 거의 없습니다."\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr "온도가 260C이상이면 기기에 손상을 줍니다. 조심 하십시요!"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"필라멘트의 두께가 얼마인지 아십니까? 일반적인 필라멘트는 대략 3mm 나 1.75mm입"\r
"니다."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr ""\r
"기기가 300mm/s 이상의 이동 속도를 달성 할 수 있는 가능성이 거의 없습니다"\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr "%0.2f 미터 %0.0f 그램"\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "프로파일을 클립보드에 복사"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "고품질 프린트"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "일반 품질 프린트"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "빠른 저품질 프린트 "\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "얇은 벽으로된 컵이나 꽃병"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "지름:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "외부만"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "처음 실행 마법사 실행..."\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2013-10-01 15:32+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Er is een nieuwere versie van Cura beschikbaar, wil je die downloaden?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Nieuwe versie beschikbaar"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Wat voor een machine heb je:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
#, fuzzy\r
msgid "Other machine information"\r
msgstr "Afmeting van de machine in mm"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "De volgende vooraf gedefinieerde machine profielen zijn beschikbaar"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
#, fuzzy\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
#, fuzzy\r
msgid "Custom RepRap information"\r
msgstr "Dien anomieme gebruiksinformatie in:"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
#, fuzzy\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"RepRap machines verschillen enigzins. Er is geen standaard configuratie in "\r
"Cura voor enig model."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr "Controleer het standaardprofiel voordat u het op uw machine gebruikt."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Wanneer je een standaard profiel voor je machine wenst, maak dan een issue "\r
"aan op Github."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Je dient zelf handmatig Marlin of Sprinter firmware te installeren."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Machine naam"\r
\r
# Ik denk dat we hier duidelijker moeten schrijven dat het om de breedte van je printbereik gaat, voordat mensen de breedte van hun machine gaan opmeten...\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Machine breedte (mm)"\r
\r
# Idem aan width\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Machine lengte (mm)"\r
\r
# Idem width\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Machine hoogte (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Nozzle maat (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Verwarmd platform"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Midden van platform is 0,0,0 (RoStock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Selecteer je machine"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Wat voor een machine heb je:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
#, fuzzy\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Anders (bv RepRap)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
"Door anonieme gebruikers informatie te verzamelen kan Cura blijven "\r
"verbeteren."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"Je model zal NIET online gepubliceerd worden. Het verzamelt ook geen privacy "\r
"gevoelige informatie."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Dien anomieme gebruiksinformatie in:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Kijk voor alle details op: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Selecteer de upgrades die je hebt"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"Cura wil graag weten welke upgrades jouw machine heeft zodat er betere "\r
"standaard instellingen voor jouw Ultimaker gebruikt kunnen worden."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Upgrade van extrusie aandrijving"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
#, fuzzy\r
msgid "Heated printer bed (kit)"\r
msgstr "Verwarmd platform (zelf gemaakt)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Verwarmd platform (zelf gemaakt)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Duo extrusie (experimenteel)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"upgrade van de extrusie aandrijving. Voor de betrouwbaardheid van de machine "\r
"wordt deze upgrade aangeraden wanneer je deze niet hebt."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Deze upgrade kan aangeschaft worden in de webshop van Ultimaker. De upgrade "\r
"staat ook op thingiverse als ding:26094"\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Ultimaker Firmware Opwaarderen"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"stappenmotoren aan en regelt de temperatuur. De firmware zorgt dat je "\r
"printer uiteindelijk werkt."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"gedaan om nog betere prints te maken en om de machine makkelijker te "\r
"calibreren."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"Cura heeft deze nieuwe mogelijkheden nodig en zal hoogstwaarschijnlijk "\r
"opgewaardeerd moeten worden. Je krijgt nu de kans om dat te doen."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Niet opwaarderen naar deze firmware als:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
#, fuzzy\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* Je een oudere machine hebt die gebaseerd is op een ATMega1280"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Je andere wijzigingen in de firmware hebt"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Het is handig om je machine nu op enkele punten te controleren.Je kan deze "\r
"controle overslaan als je machine al goed is."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Doe een controle"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Sla de controle over"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Communicatie:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Temperatuur:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Eindschakelaars:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Laat de foutmelding log zien"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Verbinding aan het maken met de machine"\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Afkoelen voor de temperatuur controle"\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Controle van de verwarming en de de temperatuur sensor."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Zorg ervoor dat geen enkele eindschakelaar is ingedrukt."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Temperatuur meting is MISLUKT!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Temperatuur van printkop: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Communicatie status: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Het is niet gelukt een verbinding te maken met de printer."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Druk de linker X eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Druk de rechter X eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Druk de voorste Y eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Druk de onderste Y eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Druk de achterste Y eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Controle gereed"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Druk de bovenste Z eindschakaar in."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"Om de Stappen per E te kalibreren zijn enkele manuele handelingen nodig."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Haal eerst al het filament uit de machine."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"Voer nu je filament in. Zorg dat het uiteinde gelijk ligt met de bovenkant "\r
"van de extrusie aandrijving."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "We zullen het filament 100 mm. doorvoeren"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Extrudeer 100 mm. filament"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Meet nu de hoeveelheid geëxtrudeerd filament op (dit kan meer, maar ook "\r
"minder zijn dan 100 mm.)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Opslaan"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Dit resulteert in het volgende aantal stappen per E:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "Je kan deze stappen herhalen voor een betere kalibratie."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Wanneer er nog filament in de printer zit, die warmte nodig heeft om het te "\r
"verwijderen, druk dan op de verwarm knop hieronder:"\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Opwarmen voor het verwijderen van filament"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"dit probleem zich blijft herhalen, haal dan de USB kabel uit de printer en "\r
"sluit deze opnieuw aan."\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
#, fuzzy\r
msgid "Bed leveling wizard"\r
msgstr "Wizard: Platform vlak afstellen..."\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
#, fuzzy\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Deze wizard helpt je bij de volgende stappen:"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
#, fuzzy\r
msgid "It will do the following steps"\r
msgstr "Dit resulteert in het volgende aantal stappen per E:"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
#, fuzzy\r
msgid "Connect to printer"\r
msgstr "Verbinding aan het maken met de machine"\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr "Ga door"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
#, fuzzy\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "Deze wizard helpt je bij de volgende stappen:"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
#, fuzzy\r
msgid "Head offset wizard"\r
msgstr "Wizard: Afstand printkoppen calibreren..."\r
msgid "Expert config"\r
msgstr "Expert"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Sorry... Cura heeft geen standaard firmware voor de configuratie van jouw "\r
"machine."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Firmware update"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "Oké"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Firmware controleren..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Verbinding maken met de machine..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Geen machine gevonden om de firmware op te waarderen\n"\r
"Is je machine verbonden met de computer?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Firmware aan het uploaden..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Klaar!\n"\r
"Firmware geïnstalleerd: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Het is niet gelukt de firmware te uploaden. \n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
#, fuzzy\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Verbinden met YouMagine.com is mislukt."\r
msgid "Print...\tCTRL+P"\r
msgstr "Print...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Sla GCode Op..."\r
\r
msgid "Save Profile..."\r
msgstr "Sla Profiel Op..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Laad Profiel Uit GCode..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Reset Profiel Naar Standaardinstellingen"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Voorkeuren...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Machineinstellingen..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Recente Modellen"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Recente Profielen"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Sluit"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Bestand"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
#, fuzzy\r
msgid "Minecraft map import..."\r
msgstr "Importeer Minecraft kaart data..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "PID foutopsporing..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
#, fuzzy\r
msgid "Auto Firmware Update..."\r
msgstr "Firmware update"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Kopieer profiel naar klembord"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Afmetingen printkop"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Gereedschappen"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Machine"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Eenvoudige bedieningsmodus"\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Uitgebreide bedieningsmodus"\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Expertinstellingen..."\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Wizard: Platform vlak afstellen..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Wizard: Afstand printkoppen calibreren..."\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Online documentatie..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Meld een probleem..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Controleer op updates..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Open de YouMagine website..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "Over Cura..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Help"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Voeg een nieuwe machine toe..."\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Installeer de standaardfirmware..."\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Installeer je eigen firmware..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Selecteer een profielbestand om te laden"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Selecteer een GCode bestand om het profiel uit te laden..."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Deze feature werkt alleen wanneer GCode is gemaakt vanuit Cura nieuwer dan "\r
"versie 12.07"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Fout bij het laden van het profiel"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Selecteer een profiel om op te slaan"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"opgeslagen!\n"\r
"Wil je echt herstellen?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Profiel herstellen"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Profiel herstellen"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Let op: Wanneer je je eigen firmware installeert, zou je machine niet goed "\r
"kunnen werken en zou je je printer kunnen beschadigen."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Open firmware om te installeren"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Je hebt de nieuwste versie van Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Te gek!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Plugins"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Fout: geen plugin geselecteerd"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
#, fuzzy\r
msgid "Preferences"\r
msgstr "Voorkeuren...\tCTRL+,"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
#, fuzzy\r
msgid "Print window"\r
msgstr "Printen"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Kleuren"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Taal"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Filamentinstellingen"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Cura"\r
\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
# Suggestions: Machine settings -> General properties?\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Algemene eigenschappen"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Afmetingen printkop"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Extrusie %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Communicatieinstellingen"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
#, fuzzy\r
msgid "Add new machine"\r
msgstr "Voeg een nieuwe machine toe..."\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
#, fuzzy\r
msgid "Remove machine"\r
msgstr "Selecteer je machine"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
#, fuzzy\r
msgid "Change machine name"\r
msgstr "Machine naam"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Kan de laatste machineconfiguratie niet verwijderen in Cura"\r
\r
# Suggestie: "Error removing machine"\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Fout bij verwijderen van machine"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr "Verbinden"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Printen"\r
\r
msgid "Error log"\r
msgstr "Foutmelding log"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Laden..."\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Draaien"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Verschalen"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Spiegelen"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Herstel"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Leg plat"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Maximaal"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Spiegel X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Spiegel Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Spiegel Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Verschaal X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Verschaal Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Verschaal Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Afmeting X (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Afmeting Y (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Afmeting Z (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Uniform verschalen"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Weergavetype"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normaal"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Overhang"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Transparant"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Röntgen"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Lagen"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Deel op YouMagine..."\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Open 3D model"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Sla 3D model op"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, fuzzy, python-format\r
msgid "Print with %s"\r
msgstr "Print via USB..."\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Slicer log..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Sla toolpad op..."\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "De slicer geeft de volgende melding"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Logboek..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Hoeveel exemplaren wilt u?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Aantal exemplaren"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
#, fuzzy\r
msgid "Multiply"\r
msgstr "Vermenigvuldig object"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Centreer op platform"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Verwijder object"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Vermenigvuldig object"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Deel object op in onderdelen"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Voeg duo extrusie samen"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Verwijder alle objecten"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
#, fuzzy\r
msgid "Reload all objects"\r
msgstr "Verwijder alle objecten"\r
\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Verwijder alle objecten"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
# Misschien GCode noemen in plaats van Toolpath\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Toolpad naar SD-kaart"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
"De voorvertoning van de overhang is niet mogelijk omdat OpenGL dit niet "\r
"ondersteunt."\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Hoge kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normale kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Snelle, lage kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Dunwandig kopje of vaas"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Print ondersteuningsmateriaal"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
#, fuzzy\r
msgid "Select a quickprint profile:"\r
msgstr "Selecteer een printmodus:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Materiaal:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Diameter:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Anders:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Alleen de buitenkant"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
#, fuzzy\r
msgid "Height (mm)"\r
msgid "Webcam error"\r
msgstr ""\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, fuzzy, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Bezig met toolpad laden voor visualisatie..."\r
msgstr "Fout in 3D venster"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Kwaliteit"\r
\r
"Dit wordt gebruikt in combinatie met de afmeting van de printkop om het\n"\r
"aantal lijnen en de dikte van deze lijnen te bepalen."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Retractie"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Retractie inschakelen"\r
"laagdikte. Voor een gelijke verdeling van de sterkte van het onderdeel is "\r
"het aan te raden deze waarde ongeveer gelijk te laten zijn aan de wanddikte."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Vulling"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Dichtheid vulling (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Snelheid en Temperatuur"\r
\r
msgstr "Printtemperatuur (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Temperatuur 4de printkop (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Temperatuur 3de printkop (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Temperatuur platform (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Temperatuur voor een verwarmd platform. Voer 0 in wanneer je zelf handmatig "\r
"voorverwarmt."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "Geen"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "Contact met platform"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "Overal"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Ondersteuning"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Soort ondersteuning"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"\"Geen\" wanneer je nergens ondersteuning wilt gebruiken.\n"\r
"\"Overal\" genereert ook ondersteuning in een model zelf."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Boord"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Mat"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Type adhesie aan platform"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
#, fuzzy\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"\"Raft\" voegt een raster toe tussen het platform en het object.\n"\r
"(Let op: Als brim of raft aan staan wordt \"skirt\" uitgezet)"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "Beide"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "Eerste kop"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "Tweede kop"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Ondersteuning bij duo extrusie"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"meer wisselingen tussen de printkoppen, wat tijd kost.\n"\r
"Je kan de 2de printkop ook gebruiken voor oplosbaar ondersteuningsmateriaal."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
#, fuzzy\r
msgid "Dual extrusion"\r
msgstr "Voeg duo extrusie samen"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"print the 2nd color."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"This means that with thinner layers, your tower gets bigger."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Filament"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Diameter (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"hogere waarde betekent minder geëxtrudeerd materiaal, een lager getal zorgt "\r
"voor minder materiaal."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Diameter2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diameter van het filament in de 2de printkop. Voer 0 in om dezelfde diameter "\r
"te gebruiken als voor printkop 1."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Diameter3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diameter van het filament in de 3de printkop. Voer 0 in om dezelfde diameter "\r
"te gebruiken als voor printkop 1."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Diameter4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Diameter van het filament in de 4de printkop. Voer 0 in om dezelfde diameter "\r
"te gebruiken als voor printkop 1."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Diameter (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diameter van het filament in de 3de printkop. Voer 0 in om dezelfde diameter "\r
+"te gebruiken als voor printkop 1."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Vloeien (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Compensatie van het vloeien. De hoeveelheid geëxtrudeerd materiaal wordt "\r
"vermenigvuldigd met deze waarde."\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Retractie"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Snelheid (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"Snelheid waarmee het filament wordt teruggetrokken. Een hogere snelheid "\r
"werkt beter, maar een té hoge snelheid kan het filament beschadigen."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Afstand (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"Hoeveelheid materiaal dat wordt teruggetrokken. Voer 0 in wanneer je geen "\r
"terugtrekking wilt gebruiken. 4,5 mm geeft goede resultaten."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Duo extrusie wissel hoeveelheid (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"gewisseld wordt. Voer 0 in voor geen terugtrekking. 16 mm geeft over het "\r
"algemeen goede resultaten."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Minimum doorvoer (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Minimale afstand om retractie te activeren. Dit zorgt ervoor dat je niet te "\r
"veel terugtrekking hebt op een klein gebied."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Omlopen inschakelen"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"\"Omlopen\" (ook wel kammen of \"comb\") is het met de printkop ontwijken "\r
"van het passeren van gaten. Dit vermindert draden, maar de printtijd neemt "\r
"mogelijk toe. Wanneer omlopen uit staat zal de printer altijd retractie "\r
"toepassen en recht van begin naar het eindpunt bewegen."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Minimale extrusie voorafgaand aan retractie (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
#, fuzzy\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"Deze optie voorkomt te veel retractie op een korte afstand, omdat dat het "\r
"filament te veel kan beschadigen of vervormen."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
#, fuzzy\r
msgid "Z hop when retracting (mm)"\r
msgstr "Minimale extrusie voorafgaand aan retractie (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"effect on delta towers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Dikte van de eerste laag (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"het platform hecht. Stel in op 0.0 om de eerste laag even dik te maken als "\r
"de overige lagen."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
#, fuzzy\r
msgid "Initial layer line width (%)"\r
msgstr "Contact lijn dikte (mm)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Model onderaan afsnijden (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"platform wordt overgeslagen. Deze optie kan gebruikt worden voor objecten "\r
"die geen vlakke onderkant hebben en dus een te kleine eerste laag hebben."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Overlap bij duo extrusie (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
#, fuzzy\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"Om een betere hechting tussen verschillende kleuren/materialen te krijgen "\r
"bij duo extrusie voeg je een hoeveelheid overlap toe."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Snelheid:"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Verplaats snelheid (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
#, fuzzy\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"Ultimaker kan tot 250 mm/s behalen. Sommige machines zullen dan stappen gaan "\r
"overslaan."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Snelheid voor de eerste laag (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Printsnelheid voor de eerste laag. De eerste laag kan je beter langzamer "\r
"printen, zodat deze goed aan het platform hecht."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Snelheid voor vulling (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
#, fuzzy\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
"kwaliteit negatief beïnvloeden."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Snelheid voor de eerste laag (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Snelheid waarmee de vulling wordt geprint. Wanneer hier 0 wordt ingevuld, "\r
+"wordt de vulling met de printsnelheid geprint. Wanneer je de vulling sneller "\r
+"print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
+"kwaliteit negatief beïnvloeden."\r
+\r
+#: Cura/util/profile.py:219\r
#, fuzzy\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Verplaats snelheid (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"and the outer shell speed will effect quality in a negative way."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
#, fuzzy\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Snelheid voor vulling (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
#, fuzzy\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
"kwaliteit negatief beïnvloeden."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Koeling"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Minimale tijd per laag (sec)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
#, fuzzy\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"volgende laag erop gelegd wordt. De printer zal langzamer bewegen om de "\r
"ingestelde minimale tijd aan een laag te besteden."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Koelventilator(s) aanzetten"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Zet de koelventilator(s) aan tijdens het printen. Extra koeling van de "\r
"koelventilator(s) is essentieel bij sneller printen."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Aantal lijnen"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"Wanneer je 0 invult begint de printer direct aan het object. Meerdere zomen "\r
"zijn aan te raden bij kleine objecten."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Start afstand (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"Dit is de afstand van de eerste lus, de volgende lussen zullen verder van "\r
"het object af gelegd worden."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Mimale lengte (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"Let op: Wanneer het aantal lijnen op 0 staat, wordt deze waarde genegeerd."\r
\r
# Idem width\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
#, fuzzy\r
msgid "Fan full on at height (mm)"\r
msgstr "Machine hoogte (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
#, fuzzy\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"De laag vanaf welke de koeling aangezet wordt. De eerste laag is laag 0. De "\r
"eerste laag hecht beter wanneer de koeling uit staat."\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Minimale snelheid koelventilator (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"wordt de ventilatorsnelheid gevarieerd tussen de minimale en maximale "\r
"snelheid."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Maximale snelheid koelventilator (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"Wanneer de snelheid per laag 200% lager is dan de gewone printsnelheid, "\r
"wordt de maximale snelheid van de koelventilator gebruikt."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Minimale snelheid (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
#, fuzzy\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"wanneer de printer langzamer gaat, zal dit nooit langzamer zijn dan deze "\r
"snelheid."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Printkop optrekken voor koeling"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"de machine wachten tot de minimale tijd per laag is bereikt voordat de "\r
"volgende laag geprint wordt."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Vulling"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Opvulling van bovenste lagen"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"geprint worden (ideaal voor kopjes en vazen). Zet een vinkje voor een dichte "\r
"bovenkant."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Opvulling van onderste lagen"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Zorgt voor een dichte bodemlaag. Wanneer je hier geen vinkje zet, wordt de "\r
"bodem geprint met het vulpercentage (ideaal voor gebouwen)."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Overlap van vulling (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"Hoeveelheid overlap tussen de vulling en de wanden. Voor een goede hechting "\r
"tussen de wanden en de vulling pas je een kleine overlap toe."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
#, fuzzy\r
msgid "Structure type"\r
msgstr "Soort ondersteuning"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"being horizontal and 0 degree being vertical."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Hoeveelheid vulling (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, fuzzy, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"ondersteuning die makkelijker te verwijderen is. 20% is over het algemeen "\r
"goed."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Afstand X/Y (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"0,7 mm is een goede afstand die voorkomt dat de ondersteuning te goed hecht "\r
"aan het model."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Afstand Z (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"0,15 mm. is een goede afstand waarbij het ondersteuningsmateriaal makkelijk "\r
"te verwijderen is."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "Buitencontour spiraliseren"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
#, fuzzy\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"zal leiden tot een constante Z stijging over de gehele print. Met deze "\r
"functie wordt een vast voorwerp een één wandige print met een stevige bodem."\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Hoeveelheid boorden"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"een grotere kleefrand, maar dit zorgt ook dat je printoppervlak kleiner "\r
"wordt."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Extra marge (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
#, fuzzy\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"ingeschakeld. Wanneer je deze marge vergroot gebruik je meer materiaal en "\r
"krijg je een sterkere raft. Dit laat minder ruimte over voor je print."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Afstand tussen lijnen (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr ""\r
"Wanneer je een mat gebruikt, is dit de afstand tussen de lijnen van de mat."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Dikte basis (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr ""\r
"Wanneer je een mat gebruikt is dit de dikte van de eerste laag van de mat."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Basis lijn breedte (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
"Wanneer je een mat gebruikt is dit de breedte van de lijnen van de eerste "\r
"laag van de mat."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Contact dikte (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
"Wanneer je een mat gebruikt is dit de dikte van de contactlaag met het "\r
"object."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Contact lijn dikte (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
"Wanneer je een mat gebruikt is dit de breedte van de lijn van de contactlaag "\r
"met het object."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Dikte van de eerste laag (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Contact lijn dikte (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Repareer een dramatisch model"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Combineer alles (Type-A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
#, fuzzy\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"gaten in tact te laten. Type-B negeert alle interne gaten en behoudt alleen "\r
"de buitenste vorm per laag."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Combineer alles (Type-B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Behoudt open vlakken"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
#, fuzzy\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Zoals met alle \"Repareer een dramatisch model\" opties, zullen resultaten "\r
"variëren en is het gebruik van deze opties op eigen risico."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Uitgebreid hechten"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
#, fuzzy\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"Zoals met alle \"Repareer een dramatisch model\" opties, zullen resultaten "\r
"variëren en is het gebruik van deze opties op eigen risico."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Bewaar het profiel wanneer je slicet."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"Sla ook meteen het profiel op als [stl_file]_profile.ini wanneer je slicet."\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Kosten (prijs/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
"Kosten van je filament per kg om de kosten van je uiteindelijke print te "\r
"kunnen inschatten."\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Kosten (prijs/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
"Kosten van je filament per meter om de kosten van je uiteindelijke print te "\r
"kunnen inschatten."\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Detecteer automatisch de aanwezigheid van een SD kaartlezer"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"sommige systemen zullen externe harde schijven of USB's als SD kaart gezien "\r
"worden."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Controleer of er updates zijn"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Controleer of er een nieuwe versie van Cura is tijdens het opstarten"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Verstuur gebruiks statistieken"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
#, fuzzy\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Verstuur anonieme gebruiksinformatie om de volgende versie van Cura te "\r
"verbeteren"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Dichtheid (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"Deze waarde wordt gebruikt om het gewicht van de uiteindelijke print te "\r
"schatten."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Model kleur"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Model kleur (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Model kleur (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Model kleur (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Maximale breedte (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Afmeting van de machine in mm"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Maximale diepte (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Maximale hoogte (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
#, fuzzy\r
msgid "Machine center 0,0"\r
msgstr "Machine naam"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Wanneer je een verwarmd platform hebt, zet deze vink de opties hiervoor aan. "\r
"Je dient Cura wel opnieuw op te starten."\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "GCode soort"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
#, fuzzy\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"UltiGCode is een variatie van de RepRap GCode die meer instellingen in de "\r
"machine opslaat in plaats van in de slicersoftware."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Aantal printkoppen"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Aantal printkoppen op je printer"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "X afstand"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "De afstand tussen de eerste en de tweede printkop."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Y afstand"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "De afstand tussen de eerste en de derde printkop."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "De afstand tussen de eerste en de vierde printkop."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "E-stappen per 1 mm. filament"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Wanneer hier 0 wordt ingevoerd, wordt de waarde genegeerd en de waarde uit "\r
"je firmware gebruikt."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Seriële poort"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "De seriële poort die gebruikt wordt voor communicatie met de printer."\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Baudrate"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Deze dient overeen te komen met de instellingen in je firmware \n"\r
"Meestal 250000, 115200 of 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Minimale afmeting printkop X (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
"niet met eerdere objecten mag botsen."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Minimale afmeting printkop Y (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
"niet met eerdere objecten mag botsen."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Maximale afmeting X (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Maximale afmeting printkop Y (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
"niet met eerdere objecten mag botsen."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Hoogte printkop samenstelling (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"dan deze waarde, kan je niet meerdere objecten printen. Dit is 60 mm voor "\r
"een Ultimaker."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"are not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr ""\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Kopieer profiel naar klembord"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Hoge kwaliteit"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normale kwaliteit"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Snelle, lage kwaliteit"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Dunwandig kopje of vaas"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Diameter:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Alleen de buitenkant"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Opstartwizard..."\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2013-10-02 11:23+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Content-Transfer-Encoding: 8bit\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Dostępna jest nowa wersja Cura, czy chcesz ją pobrać?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Dostępna jest nowa wersja"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Jaki rodzaj drukarki posiadasz:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
#, fuzzy\r
msgid "Other machine information"\r
msgstr "Wielkość drukarki w mm"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"Please report it at the github issue tracker."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
#, fuzzy\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
#, fuzzy\r
msgid "Custom RepRap information"\r
msgstr "Wyślij anonimowe informaje o użyciu programu:"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
#, fuzzy\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"Rózne drukarki RepRap bardzo różnią się pomiędzy sobą i nie ma standardowej "\r
"konfiguracji Cura, która działałaby dla każdej z nich."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Jeśli chcesz aby dla Twojej drukarki został dodany domyślny profil, utwórz "\r
"Issue na github."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Będziesz musiał ręcznie zainstalować firmware Marlin lub Sprinter."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Nazwa drukarki"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Szerokość drukarki (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Głębokość drukarki (mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Wysokość drukarki (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Średnica dyszy (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Podgrzewany stół"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Środek stołu ma współrzędne 0,0,0 (RoStock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Wybierz swoją drukarkę"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Jaki rodzaj drukarki posiadasz:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
#, fuzzy\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Inna (np: RepRap)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
"Zbieranie anonimowych danych o sposobie używania Cura pomoże w ciągłym "\r
"rozwoju programu."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"Ta opcja NIE wysyła do sieci Twoich modeli ani nie zbiera żadnych "\r
"personalnych informacji."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Wyślij anonimowe informaje o użyciu programu:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Szczegółowe informacje: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Wybierz które upgrade'y posiadasz"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"Aby zaproponować Ci lepsze ustawienia domyślne dla Ultimakera, Cura chce "\r
"wiedzieć które upgrade'y masz zainstalowane w drukarce."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Upgrade napędu ekstrudera"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
#, fuzzy\r
msgid "Heated printer bed (kit)"\r
msgstr "Podgrzewany stół (własnej roboty)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Podgrzewany stół (własnej roboty)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Podwójna głowica (experymentalne)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"Upgrade napędu ekstrudera. Jeśli jeszcze nie posiadasz tego upgrade'u jest "\r
"on wysoko zalecany dla zwiększenia niezawodności."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Ten upgrade może być kupiony w sklepie Ultimakera, możesz go również znaleźć "\r
"na Thingiverse jako thing:26094"\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Uaktualnij firmware Ultimakera"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"3D. Oprogramowanie to kontroluje działanie silników krokowych, reguluje "\r
"temperaturę i sprawia że Twoja drukarka działa."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"Wersja firmware instalowana w nowych drukarkach Ultimaker diała, ale w "\r
"nowsze wersję oferują lepszą jakość wydruku i łatwiejszą kalibrację."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"Cura wymaga tych nowych funkcji i w związku z tym Twój firmwaer "\r
"prawdopodobnie musi zostać uaktualniony. Cura pomoże Ci to teraz zrobić."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Nie uaktualniaj swojego firmware jeśli:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
#, fuzzy\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* Posidasz starszą drukarkę opartą o ATMega1280"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Wprowadzałeś inne niestandardowe zmiany w firmware"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Ultimakera. Możesz pominąć te testy jeśli jesteś pewien że twoja drukarka "\r
"pracuje prawidłowo."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Uruchom testy"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Pomiń testy"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Komunikacja:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Temperatura:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Wyłączniki krańcowe:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Pokaż dziennik błędów"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Łączenie z drukarką."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Ochładzanie przed testem temperatury."\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Sprawdzanie grzałki i czujnika temperatury."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Upewnij się, że żaden wyłącznik krańcowy nie jest teraz wciśnięty."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Pomiar temperatury NIE POWIÓDŁ SIĘ!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Temperatura głowicy: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Stan komunikacji: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "NIE UDAŁO SIĘ ustanowić połączenia z drukarką."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Naciśnij wyłącznik krańcowy lewy osi X."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Naciśnij wyłącznik krańcowy prawy osi X."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Naciśnij wyłącznik krańcowy przedni osi Y."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Naciśnij wyłącznik krańcowy górny osi Z."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Naciśnij wyłącznik krańcowy tylny osi Y."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Testy zakończone"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Naciśnij wyłącznik krańcowy przedni dolny Z."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Kalibracja ilości kroków osi E wymaga kilku ręcznych czynności."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Najpierw usuń filament ze swojej drukarki."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"Następnie umieść filament tak, aby jego końcówka była równo na wysokości "\r
"górnej krawędzi ekstrudera."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "Cura wypchnie teraz 100mm filamentu"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Wypchnij 100mm filamentu"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Teraz zmierz dokładnie długośc wypchniętego filamentu (może ona być większa "\r
"lub mniejsza niż 100mm)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Zapisz"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Wynik pomiary w ilości kroków osi E:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr ""\r
"Pożesz ponownie wykonać te kroki aby uzyskać jeszcze lepszą kalibrację."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Jesli w drukarce jest filament który wymaga nagrzania głowicy aby go wyjąć, "\r
"naciśnij przycisk poniżej aby ją rozgrzać:"\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Rozgrzej głowicę w celu usunięcia filamentu"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"Jeśli błąd się powtarza, spróbuj odłączyć a następnie ponownie podłączyć "\r
"kabel USB"\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura została autorzyowana do wysyłania na YouMagine"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
#, fuzzy\r
msgid "Bed leveling wizard"\r
msgstr "Uruchom kreatora poziomowania..."\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
#, fuzzy\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Ten kreator pomoże Ci przeprowadzić następujące kroki:"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
#, fuzzy\r
msgid "It will do the following steps"\r
msgstr "Wynik pomiary w ilości kroków osi E:"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
#, fuzzy\r
msgid "Connect to printer"\r
msgstr "Łączenie z drukarką."\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
msgid "Resume"\r
msgstr "Wznów"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
#, fuzzy\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "Ten kreator pomoże Ci przeprowadzić następujące kroki:"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
#, fuzzy\r
msgid "Head offset wizard"\r
msgstr "Uruchom kratora przesunięcia głowicy"\r
msgid "Expert config"\r
msgstr "Ekspert"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Przykro mi, ale Cura nie posiada domyślnego firmware'u dla Twojej "\r
"konfiguracji drukarki."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Uaktualnienie firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Wczytywanie firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Łączenie z drukarką..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Nie udało się znaleźć drukarki aby wysłąć firmware\n"\r
"Czy Twoja drukarka jest podłączona do komputera?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Wysyłanie firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Koniec!\n"\r
"Zainstalowano firmware: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Nie udało się zapisać firmware.\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
#, fuzzy\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Nie udało się połączyć z YouMagine.com"\r
msgid "Print...\tCTRL+P"\r
msgstr "Drukuj...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Zapisz GCode..."\r
\r
msgid "Save Profile..."\r
msgstr "Zapisz Profil..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Wczytaj Profil z GCode..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Zresetuj Profil do domyślnego"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Ustawienia...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Ustawienia drukarki..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Ostatnio otwarte Modele"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Ostatnio otwarte Profile"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Zakończ"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Plik"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Import Minecraft map..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "Debugger PID..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
#, fuzzy\r
msgid "Auto Firmware Update..."\r
msgstr "Uaktualnienie firmware"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Kopiuj Profil do schowka"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
#, fuzzy\r
msgid "Print one at a time"\r
msgstr "Rozmiar głowicy drukarki"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Narzędzia"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Drukarka"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Przełącz na tryb prosty..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Przełącz na tryb pełny..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
#, fuzzy\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Otwórz ustawienia zaawansowane..."\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Uruchom kreatora poziomowania..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Uruchom kratora przesunięcia głowicy"\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Ekspert"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Dokumentacja online..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Zgłoś problem..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Sprawdź aktualizacje..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Otwórz stronę YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "O programie..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Pomoc"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Dodaj nową drukarkę..."\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
#, fuzzy\r
msgid "Install default firmware..."\r
msgstr "Zainstaluj domyślny firmware Marlin"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
#, fuzzy\r
msgid "Install custom firmware..."\r
msgstr "Zainstaluj własny firmware"\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Wybierz Profil do wczytania"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Wybierz plik GCode z którego wczytać Profil"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Ta funkcja działa tylko z plikami GCode utworzonymi przez wersję Cura 12.07 "\r
"lub nowszą"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Błąd wczytywania Profilu"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Wybierz plik Profilu do zapisu"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"utracone!\n"\r
"Jesteś pewien że chcesz zresetować?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Reset Profilu"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Reset Profilu"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Uwaga: Instalowanie własnego firmware nie gwarantuje poprawnego działania "\r
"drukarki i może ją uszkodzić."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Otwóz firmware do wysłania"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Posiadasz najnowszą wersję Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Zajebiasczo!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Rozszerzenia"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Błąd: nie wybrano rozszerzenia"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
#, fuzzy\r
msgid "Preferences"\r
msgstr "Ustawienia...\tCTRL+,"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
#, fuzzy\r
msgid "Print window"\r
msgstr "Drukowanie"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Kolory"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Ustawienia Filementu"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Ustawienia Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Ustawienia drukarki"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Rozmiar głowicy drukarki"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Ekstruder %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Ustawienia łączności"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
#, fuzzy\r
msgid "Add new machine"\r
msgstr "Dodaj nową drukarkę..."\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
#, fuzzy\r
msgid "Remove machine"\r
msgstr "Wybierz swoją drukarkę"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
#, fuzzy\r
msgid "Change machine name"\r
msgstr "Nazwa drukarki"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Nie można usunąć ostatniej w Cura konfiguracji drukari"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Błąd usuwania drukarki"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr "Podłącz"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Drukuj"\r
\r
msgid "Error log"\r
msgstr "Dziennik błędów"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Wczytaj"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Obróć"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Skaluj"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Odbij"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Zresetuj"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Ułóż na płasko"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Maximum"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Odbij X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Odbij Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Odbij Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Skaluj X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Skaluj Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Skaluj Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Rozmiar X (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Rozmiar Y (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Rozmiar Z (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Jednorodna skala"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Tryb widoku"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normalny"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Zwisy"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Przeźroczysty"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Promienie X"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Warstwy"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Umieść na YouMagine"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Otwórz model 3D"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Zapisz model 3D"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, fuzzy, python-format\r
msgid "Print with %s"\r
msgstr "Drukuj przez USB"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Dziennik modułu Slice..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Zapisz ścieżkę narzędzia"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Raport z modułu Slice "\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Dziennik z silnika..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
#, fuzzy\r
msgid "Multiply"\r
msgstr "Powiel obiekt"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Wyśrodkuj na platformie"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Usuń obiekt"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Powiel obiekt"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Podziel obiekt na części"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Złącz podwójne ekstrudowanie"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Usuń wszystkie obiekty"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
#, fuzzy\r
msgid "Reload all objects"\r
msgstr "Usuń wszystkie obiekty"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Usuń wszystkie obiekty"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Zapisz ścieżkę na SD"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr "Widok zwisów nie działą z powodu braku wsparcia shaderów OpenGL."\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Wysoka jakość druku"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normalna jakość druku"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Szybka niska jakość druku"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Cieńkościenny kubek lub waza"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Drukuj strukturę wsparcia"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
#, fuzzy\r
msgid "Select a quickprint profile:"\r
msgstr "Wybierz typ wydruku:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Materiał:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Średnica:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Inne:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Tylko zewnętrzne"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
#, fuzzy\r
msgid "Height (mm)"\r
msgid "Webcam error"\r
msgstr ""\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, fuzzy, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Wczytaj ścieżkę do wizualizacji..."\r
msgstr "Błąd okna 3D"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Jakość"\r
\r
"W powiązaniu ze średnicą dyszy to ustawienie decyduje o ilości linii "\r
"obrysowych zewnętrznych oraz o ich grubości tych linii."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Retrakcja"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Włącz retrakcję"\r
"Zalecana jest wartośc zbliżona do grubości ściany aby uzyskać element o "\r
"podobnej wytrzymałości we wszystkich kierunkach."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Wypełnienie"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Gęstość wypełnienia (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
#, fuzzy\r
msgid "Speed and Temperature"\r
msgstr "Prędkość i Temperatura"\r
msgstr "Temperatura drukowania (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Temperatura 4tej dyszy (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Temperatura 3ciej dyszy (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Temperatura stołu (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Temperatura używana dla stołu drukarki. Ustaw 0 aby rozgrzać samodzielnie."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Wsparcie"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Typ struktury wsparcia"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"Wszędzie powoduje utworzenie struktur wsparcia nawet w górnych częściach "\r
"modelu."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Obrys"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Tratwa"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Typ platformy przyklejania"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
#, fuzzy\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"interfejsu pomiędzy taką tratwą a twoim obiektem.\n"\r
"(Zwróć uwagę, że włączenie Obrysu lub Tratwy wyłączy Okrążanie)"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Wsparcie dla podwójnego ekstrudera"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"Możesz również użyć 2giego ekstrudera aby użyć rozpuszczalnego meteriału do "\r
"supportu."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
#, fuzzy\r
msgid "Dual extrusion"\r
msgstr "Złącz podwójne ekstrudowanie"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"print the 2nd color."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"This means that with thinner layers, your tower gets bigger."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Filament"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Średnica (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"wyższa wartość oznacza mniej wyekstrudowanego materiału, a niższa generuje "\r
"więcej ekstrudowania."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Średnica2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Średnica filamentu dla 2giej dyszy. Użyj wartości 0 aby użyć tej samej "\r
"średnicy co dysza 1."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Średnica3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Średnica filamentu dla 3ciej dyszy. Użyj wartości 0 aby użyć tej samej "\r
"średnicy co dysza 1."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Średnica4 (mm)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Średnica filamentu dla 4tej dyszy. Użyj wartości 0 aby użyć tej samej "\r
"średnicy co dysza 1."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Średnica (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Średnica filamentu dla 3ciej dyszy. Użyj wartości 0 aby użyć tej samej "\r
+"średnicy co dysza 1."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Przepływ (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Kompensacja przepływu, ilość ekstrudowanego materiału jest mnożona przez tą "\r
"wartość"\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Retrakcja"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Prędkość (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"Prędkość z jaką cofany jest filament, wyższa prędkośc retrakcji daje lepsze "\r
"efekty. Ale bardzo wysoka prędkośc może prowadzić do scierania filamentu."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Dystans (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"Dystans o jaki ma być cofany materiał, ustaw 0 aby wyłączyć całkowicie "\r
"cofanie. Wartość 4.5mm wydaje się dawać dobre rezultaty."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Wartość przy przełączaniu ekstruderów (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"podwójnym ekstruderze, użyj 0 aby nie cofać w ogóle. Wartość 15.0mm wydaje "\r
"się dawać dobre rezultaty."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Minimalna odległość podróży (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Minimalny dystans podróży wymagany aby aktywować retrakcję. To zabezpiecza "\r
"przed zbyt częstym cofaniem materiału w małych obszarach wydruku."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Włącz filtr grzebieniowy"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Filtr grzebieniowy powoduje że dysza unika podróżówania ponad dziurami w "\r
"wydruku. Jeśli filtr jest wyłączony głowica podróżuje bezpośrednio z punktu "\r
"startu do mety w linii prostej i wtedy zawsze aktywowana jest retrakcja."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Minimalne ekstrudowanie zanim nastąpi retrakcja (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
#, fuzzy\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"co doprowadziło by do jego spłaszczenia i problemami ze ślizganiem się "\r
"ekstrudera."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
#, fuzzy\r
msgid "Z hop when retracting (mm)"\r
msgstr "Minimalne ekstrudowanie zanim nastąpi retrakcja (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"effect on delta towers."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Grubość początkowej warstwy (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"przyklejanie się sydruku do stołu. Ustaw 0.0 aby dolna warsta miała taką "\r
"samą grubość jak pozostałe warstwy."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
#, fuzzy\r
msgid "Initial layer line width (%)"\r
msgstr "Grubość linii interfejsu (mm)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Odcięcie dołu obiektu (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"Zatapia obiekt w stole, to może być przydatne jeśli obiek nie ma płaskiego "\r
"spodu powodując zbyt mała warstwę spodnią."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Nachodzenie przy dwóch ekstruderach (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
#, fuzzy\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"Dodaje pewną wartość nachodzenia na siebie linii z obu ekstruderów. Powoduje "\r
"to lepsze sklejanie się ze sobą różnych kolorów."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Prędkość"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Prędkość podróżowania (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
#, fuzzy\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"s. Ale niektóre egzemplarze mogą już pomijać skoki silników krokowych przy "\r
"tak dużych prędkościach."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Prędkość warstwy dolnej (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Prękość drukowania warstwy dolnej, najlepiej jest ją drukować wolniej aby "\r
"lepiej przyklejała się do stołu."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Prędkość wypełnienia (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
#, fuzzy\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"może znacząco skrócić czas wydruku, ale jednosczenie negatywnie wpłynąć na "\r
"ogólną jakość wydruku.."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Prędkość warstwy dolnej (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Prędkość z jaką drukowane jest wypełenienie. Jeśli ustawione jest 0 to "\r
+"używana jest podstawowa prędkość drukowania. Drukowanie wypełnienia szybciej "\r
+"może znacząco skrócić czas wydruku, ale jednosczenie negatywnie wpłynąć na "\r
+"ogólną jakość wydruku.."\r
+\r
+#: Cura/util/profile.py:219\r
#, fuzzy\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Prędkość podróżowania (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"and the outer shell speed will effect quality in a negative way."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
#, fuzzy\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Prędkość wypełnienia (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
#, fuzzy\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"może znacząco skrócić czas wydruku, ale jednosczenie negatywnie wpłynąć na "\r
"ogólną jakość wydruku.."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Chłodzenie"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Minimalny czas warstwy (sek)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
#, fuzzy\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"kolejna. Jeśli dana warstwa miała by być położona wcześniej drukarka zwolni "\r
"wydruk na tyle aby spędzić przynajmniej tyle sekund drukując tę warstwę."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Włącz wentylator chłodzący"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Włącza wentylator chłodzący drukowany obiekt. Dodakowe chłodzenie przez "\r
"wentylator jest niezbędne do szybkiego drukowania."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Ilość linii"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"Ustaw 0 aby wyłączyć tę funkcję. Wilekrotne linię pozwalają lepiej "\r
"przygotować dyszę w przypadku małych obiektów."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Startowa odległość (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"To jest odległość minimalna, wielokrotne lini skirt zostaną położne na "\r
"zewnątrz od tej odległości."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Minimalna długość (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"Zwróć uwagę, że jeśli ilość lini skirt została ustawiona na 0 ta opcja jest "\r
"ignorowana."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
#, fuzzy\r
msgid "Fan full on at height (mm)"\r
msgstr "Wysokość drukarki (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
#, fuzzy\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"numer 0. Pierwsza warstwa lepiej przyklei się do stołu, jeśli wentylator "\r
"zostanie włączony dopiero przy warstwie drugiej."\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Min prędkość wentylatora (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"dostosowywana pomiędzy prędkością min i max. Minimalna prękość jest używana "\r
"jeśli warsta nie została spowolniona przez Chłodzenie."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Max prękość wentylatora (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"dostosowywana pomiędzy prędkością min i max. Maksymalna prękość jest używana "\r
"jeśli warsta została spowolniona przez Chłodzenie więcej niż 200%."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Minimalna prędkość (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
#, fuzzy\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"Nawet jeśli wydruk zostanie spowolniony nigdy nie będzie spowolniony "\r
"bardziej niż ta prędkość minimalna."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Chłodzenie przez podnoszenie dyszy"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"spowolnienia przez Chłodzenie, a następnie poczekaj wymagany czas tak aby "\r
"zawsze spełnić warunek minimalnego czasu warstwy."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Wypełnienie"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Całkowite wypełenie górnej warstwy"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"Tworzy całkowicie wypełnioną górną warstwę, jeśli nie jest włączone zostanie "\r
"użyty normalny procent wypełnienia. Użyteczne do kubków/waz."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Całkowite wypełenie dolnej warstwy"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Tworzy całkowicie wypełnioną dolną warstwę, jeśli nie jest włączone zostanie "\r
"użyty normalny procent wypełnienia. Użyteczne do budynków."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Nachodzenie wypełnienia (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"Procentowe nachodzenie na siebie wypełniania i ścian. Niewielka wartość "\r
"nachodzenia zapewnia pewne sklejanie się ze sobą wypełnienia i ścian."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
#, fuzzy\r
msgid "Structure type"\r
msgstr "Typ struktury wsparcia"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"prints."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"being horizontal and 0 degree being vertical."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Wartość wypełnienia (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, fuzzy, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"Mniejsza wartość zużywa mniej materiału i jest łatwiejsza do usunięcia. 20% "\r
"s wydaje się odpowiednią średnią."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Odległość X/Y"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"0.7mm to odpowiednia odległość aby support nie przyklejał się za bardzo do "\r
"wydruku."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Odległość Z (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"odległości ułatwia usuwanie supportu,a le powoduje że wydruk jest brzydszy.\n"\r
"0.15mm to dobra separacja supportu."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"This feature used to be called Joris in older versions."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Ilość lini obrysu"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"obrys który lepiej się przykleja, ale powoduje to zmniejszenia efektywnie "\r
"dostępnej przestrzeni stołu."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Dodatkowy margines (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
#, fuzzy\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"spowoduje utworzenie mocniejszej tratwy używająć więcej materiału i "\r
"zostawiając mniej obszary dla Twojego wydruku."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Odległość linii (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
"Odległość poszczególnych linii tratwy, jest to odległość między środkami "\r
"linii z których zbudowana jest tratwa."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Grubość bazy (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
"Jeśli używasz tratwy to jest grubość bazowej piuerwszej warstwy tratwy która "\r
"jest drukowana."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Grubość linii bazy (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
"Jeśli używasz tratwy to jest szerokość lini z jakich zbudowana jest baza "\r
"tratwy."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Grubość interfejsu (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr "Jeśli używasz tratwy to jest grubość warstwy interfejsu."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Grubość linii interfejsu (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
"Jeśli używasz tratwy to jest szerokość linii z jakich zbudowana jest warstwa "\r
"interfejsu."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Grubość początkowej warstwy (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Grubość linii interfejsu (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Napraw straszliwości"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Scal wszystko (Typ-A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
#, fuzzy\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"wewnętrzne przestrzenie. Typ-B ignoruje calkowicie wszystkie wewnętrzne "\r
"dziury i pozostawia tylko zewnętrzny obrys dla każdej warstwy."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Scal wszystko (Typ-B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Zachowaj otwarte płaszczyzny"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
#, fuzzy\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Tak jak w przypadku wszystkich opcji \"Naprawiania straszliwości\", "\r
"rezultaty mogą być różne i używasz na własne ryzyko."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Rozległe zszywanie"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
#, fuzzy\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"Tak jak w przypadku wszystkich opcji \"Naprawiania straszliwości\", "\r
"rezultaty mogą być różne i używasz na własne ryzyko."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Zapisz Profil po podziale na warstwy"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"Po zakończeniu procesu podziału na warstwy (slice) Profil zostanie zapisany "\r
"obok modelu jako plik [stl_file]_profile.ini"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Koszt (cena/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
"Koszt filamentu za 1 kg, używany do oszacowania kosztu wydruku elementu."\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Koszt (cena/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
"Koszt filamentu za 1 metr, używany do oszacowania kosztu wydruku elementu."\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Automatycznie wykryj czytnik kart SD"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"gdyż na niektórych systemach pen-drive'y lub zewnętrzne dyski twarde "\r
"rozpoznawane są jako czytniki SD."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Spradź aktualizacje"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Sprawdzaj czy jest nowa wersja Cura podczas startu"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Wyślij statystyki użycia"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
#, fuzzy\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Wyślij anonimowe statystyki użycia aby pomóć ulepszyć kolejne wersje Cura"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Gęstość (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"Waga filamentu na 1 m3. Około 1240 dla PLA. I około 1040 dla ABS. Ta wartość "\r
"jest używana aby oszacować wagę filamentu użytą do wydruku."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Kolor modelu"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Kolor modelu (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Kolor modelu (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Kolor modelu (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Maksymalna szerokość (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Wielkość drukarki w mm"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Maksymalna głębokość (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "MAksymalna wysokość (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
#, fuzzy\r
msgid "Machine center 0,0"\r
msgstr "Nazwa drukarki"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Jeśli posiadasz podgrzewany stół, ta opcja włącza ustawienia podgrzewanego "\r
"stołu (wymaga restartu)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "Rodzaj GCode"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
#, fuzzy\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"UltiGCode jest odmianą GCode 5D która umieszcza więcej ustawień w drukarce "\r
"zamiast w Slicerze."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Ilość ekstruderów"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Ilość ekstruderów w Twojej drukarce"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "Przesunięcie X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "Przesunięcie drugiego esktrudera w odniesieniu do głównego."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Przesunięcie Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "Przesunięcie trzeciego esktrudera w odniesieniu do głównego."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "Przesunięcie czwartego esktrudera w odniesieniu do głównego."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "Ilość E-kroków na 1mm filamentu"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Ilość kroków na mm ekstrudowanego filamentu. Jeśli ustawisz 0 wartość "\r
"zostanie zignorowana i użyte będzie ustawienie w firmware."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Port szeregowy"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Port szeregowy który ma zostać użyty do komunikacji z drukarką"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Prędkość transmisji"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Musi odpowiadać ustawieniu w firmware\n"\r
"Najczęściej spotykane wartości to 250000, 115200 i 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Rozmiar głowicy w kierunku X min (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"czubka dyszy w kierunku zewnętrznych części głowicy. Dla Ultimakera jest to "\r
"75mm jeśli wentylator jest po lewej stronie."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Rozmiar głowicy w kierunku Y min (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"czubka dyszy w kierunku zewnętrznych części głowicy. Dla Ultimakera jest to "\r
"18mm jeśli wentylator jest po lewej stronie."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Rozmiar głowicy w kierunku X max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Rozmiar głowicy w kierunku Y max (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"czubka dyszy w kierunku zewnętrznych części głowicy. Dla Ultimakera jest to "\r
"35mm jeśli wentylator jest po lewej stronie."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Wysokość bramy drukarki (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"wyższy niż ta wartość nie możesz drukować obiektów jednego po drugim. Dla "\r
"Ultimakera jest to 60mm."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"are not recommended."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr ""\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Kopiuj Profil do schowka"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Wysoka jakość druku"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normalna jakość druku"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Szybka niska jakość druku"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Cieńkościenny kubek lub waza"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Średnica:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Tylko zewnętrzne"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Uruchom kreatora pierszego uruchomienia..."\r
\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2014-04-20 09:41+0100\n"\r
"Last-Translator: Andrew Answer <mail@answe.ru>\n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"Language: Russian\n"\r
"X-Generator: Poedit 1.5.7\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Новая версия Cura доступна, хотите скачать?"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Новая версия доступна"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Какой у вас тип машины:"\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
#, fuzzy\r
msgid "Other machine information"\r
msgstr "Размер машины в мм"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Доступны следующие профили принтеров"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
"или вы хотите создать дополнительный профиль,\n"\r
"сообщите на наш трекер Github."\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura готова к работе!"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
#, fuzzy\r
msgid "Custom RepRap information"\r
msgstr "Отправить анонимную информацию по использованию программы:"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
msgstr ""\r
"RepRap-принтеры бывают очень разные, тут вы можете указать свои параметры."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
"Проверьте все параметры профиля по умолчанию перед запуском вашего принтера."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Если вы хотите добавить профиль для вашей машины,\n"\r
"создайте запрос на трекере Github."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Вам нужно установить себе прошивку Marlin или Sprinter."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Название принтера"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Ширина области печати (мм)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Глубина области печати (мм)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Высота области печати (мм)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Диаметр сопла (мм)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Подогреваемый стол"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "0,0,0 в центре стола (Rostock)"\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Выберите свой принтер"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Какой у вас тип машины:"\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
#, fuzzy\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Другой (RepRap, MakerBot)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
"Сбор анонимной информации по использованию программы помогает нам улучшать "\r
"Cura."\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
msgstr ""\r
"Мы не отправляем ваши модели в Интернет и не собираем приватную информацию."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Отправить анонимную информацию по использованию программы:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Для доп. деталей см. http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Выберите обновляемые части"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"Чтобы помочь вам улучшить настройки по умолчанию для Ultimaker,\n"\r
"Cura требуется узнать, какие обновления вы делали в своей машине."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Обновление двигателя экструдера"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
#, fuzzy\r
msgid "Heated printer bed (kit)"\r
msgstr "Нагреваемый стол (самосборный)"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Нагреваемый стол (самосборный)"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Двойной экструдер (экспериментальный)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"экструдера. Если у вас нет данного обновления, рекомендуем\n"\r
"обновиться для увеличения надежности принтера."\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Это обновление может быть куплено в магазине Ultimaker\n"\r
"или найдено на thingiverse как thing:26094"\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Обновление прошивки Ultimaker"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"Прошивка управляет моторами, температурой и заставляет работать ваш\n"\r
"принтер в целом."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"Прошивка поставляется с каждым принтером, но ее обновление\n"\r
"может улучшить печать и упростить настройку."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"вашу прошивку желательно обновить.\n"\r
"Вы можете сделать это сейчас."\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Не обновляйте прошивку, если:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "* У вас старый принтер на ATMega1280 (принтер Rev 1)"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Вы сами делали изменения в прошивке"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Вы можете отменить процесс, если вы уверены, что ваш принтер нормально "\r
"работает."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Запустить проверку"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Отменить проверку"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "Связь:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Температура:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Концевые датчики:"\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Показать лог ошибок"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Соединение с машиной."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Охлаждение перед проверкой температуры."\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Проверьте нагреватель и датчик температуры."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr ""\r
"Пожалуйста, проверьте, чтобы ни один из концевых датчиков не был нажат."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Измерение температуры НЕ РАБОТАЕТ!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Температура сопла: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "Состояние связи: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Не могу установить соединение с принтером."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Пожалуйста, нажмите левый концевой датчик X."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Пожалуйста, нажмите правый концевой датчик X."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Пожалуйста, нажмите передний концевой датчик Y."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Пожалуйста, нажмите верхний концевой датчик Z."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Пожалуйста, нажмите задний концевой датчик Y."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Проверка завершена"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Пожалуйста, нажмите нижний концевой датчик Z."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "Настройка шагов экструдера требует некоторых действий."\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Для начала вытащите нить из машины."\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
msgstr "Затем вставьте нить так, чтобы она уперлась в подачу экструдера."\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "Теперь нажмите на подачу и выдавите 100 мм нити"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Выдавливаем 100 мм нити"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Теперь измерьте длину реально выдавленной нити:\n"\r
"(она может отличаться от 100 мм)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Сохранить"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Это результат следующего количества шагов экструдера:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "Вы можете повторять эти шаги для лучшей настройки."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
msgstr "Если у вас еще осталась нить в принтере, нажмите кнопку нагрева ниже:"\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Нагреть для удаления нити"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"Если это продолжает происходить, попробуйте вытащить и вставить заново USB-"\r
"кабель"\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura готова к работе!"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura готова к работе!"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
#, fuzzy\r
msgid "Bed leveling wizard"\r
msgstr "Запустить мастер выравнивания стола..."\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
#, fuzzy\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Этот мастер поможет вам настроить Cura для вашего принтера."\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
#, fuzzy\r
msgid "It will do the following steps"\r
msgstr "Это результат следующего количества шагов экструдера:"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
#, fuzzy\r
msgid "Connect to printer"\r
msgstr "Соединение с машиной."\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
#, fuzzy\r
msgid "Resume"\r
msgstr "Сброс"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
#, fuzzy\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "Этот мастер поможет вам настроить Cura для вашего принтера."\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
#, fuzzy\r
msgid "Head offset wizard"\r
msgstr "Запустить мастер смещения головки..."\r
msgid "Expert config"\r
msgstr "Подробно"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
msgstr ""\r
"Извините, Cura не поставляется с прошивкой по умолчанию для вашего принтера."\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Обновление прошивки"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"Обновление вашего RepRap при помощи Cura может сработать, а может и не "\r
"сработать."\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Читаю прошивку..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Соединяюсь с машиной..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Пожалуйста, подключите принтер к\n"\r
"компьютеру с помощью USB-кабеля."\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Не могу найти принтер для обновления прошивки.\n"\r
"Ваш принтер подключен к компьютеру?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Обновление прошивки..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Готово!\n"\r
"Установлена прошивка: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Не удалось записать прошивку.\n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
#, fuzzy\r
msgid "Failed to connect to programmer.\n"\r
msgstr "Не могу соединиться с YouMagine.com"\r
msgid "Print...\tCTRL+P"\r
msgstr "Печать...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "Сохранить G-код..."\r
\r
msgid "Save Profile..."\r
msgstr "Сохранить профиль печати..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "Загрузить профиль из G-кода..."\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Сбросить профиль"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Настройки программы...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Настройки принтера..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Последние файлы моделей"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Последние профили печати"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Выход"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Файл"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Импорт карты Minecraft..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "PID отладчик..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
#, fuzzy\r
msgid "Auto Firmware Update..."\r
msgstr "Обновление прошивки"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Скопировать профиль в буфер обмена"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "Напечатать все сразу"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "Напечатать по одной за раз"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Инструменты"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Принтер"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Переключиться на быструю печать..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Переключиться на полный набор настроек..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Открыть подробные настройки...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Запустить мастер выравнивания стола..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr "Запустить мастер смещения головки..."\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Подробно"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Онлайн-справка"\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Сообщить о проблеме..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Проверить обновления..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "Открыть сайт YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "О Cura..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Помощь"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Для печати моделей по одной вы должны ввести верные размеры головки и высоту "\r
"сопла в настройках принтера"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "Предупреждение для печати моделей по одной"\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Мастер добавления нового принтера"\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "Установить прошивку по умолчанию..."\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Установить другую прошивку..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Выберите файл профиля для загрузки"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Выберите файл G-кода для загрузки профиля из него"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Профиль не найден.\n"\r
"Эта опция работает только с файлами G-кода, созданными в Cura 12.07 и выше."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Ошибка загрузки профиля"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Выберите файл профиля для сохранения"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"Если вы не сохранили настройки, они будут потеряны!\n"\r
"Вы на самом деле хотите выполнить сброс?"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Сброс профиля"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Сброс профиля"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Внимание, установка другой прошивки не гарантирует работоспособность вашего "\r
"принтера и может повредить его."\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Откройте прошивку для обновления"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "У вас запущена последняя версия Cura!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Круто!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Расширения"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Ошибка: расширение не выбрано"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
#, fuzzy\r
msgid "Preferences"\r
msgstr "Настройки программы...\tCTRL+,"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "Окно печати"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Цвета"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Язык"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Настройки нити"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Настройки Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Настройки принтера"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Размер головки принтера"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Экструдер %d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "Настройки связи"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
#, fuzzy\r
msgid "Add new machine"\r
msgstr "Мастер добавления нового принтера"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
#, fuzzy\r
msgid "Remove machine"\r
msgstr "Выберите свой принтер"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
#, fuzzy\r
msgid "Change machine name"\r
msgstr "Название принтера"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Не могу удалить настройки последнего принтера из Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Ошибка удаления принтера"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr "Соединиться"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Печатать"\r
\r
msgid "Error log"\r
msgstr "Лог ошибок"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Загрузить"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Поворот"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Масштаб"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Отражение"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "Сброс"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Положить"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Максимум"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "Отразить по X"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Отразить по Y"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Отразить по Z"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "Масштабировать по X"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Масштабировать по Y"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Масштабировать по Z"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "Размер по X (мм)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Размер по Y (мм)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Размер по Z (мм)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Масштабировать по всем осям"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Режим просмотра"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Обычный"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Нависание"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Прозрачный"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "Рентген"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Слои"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "Опубликовать на YouMagine"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "Открыть 3D-модель"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "Сохранить 3D-модель"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "Печатать с %s"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Лог слайсера..."\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Сохранить путь"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Слайсер сообщает следующее"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Лог программы..."\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Сколько копий вам нужно?"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Количество копий"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "Умножить"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Центр стола"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Удалить объект"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Умножить объект"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Разбить объект на части"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr "Объединить двойную экструзию"\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Удалить все объекты"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr "Перегрузить все объекты"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Удалить все объекты"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Сохранить путь на SD-карту"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr "Нависание не работает из-за отсутствия поддержки в OpenGL."\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Высококачественная печать"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Печать с нормальным качеством"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Быстрая, низкокачественная печать"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Тонкостенная чашка или ваза"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Печатать поддержку"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "Выберите профиль печати:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Материал:"\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Диаметр:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Прочее:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Только внешний вид"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "Высота (мм)"\r
msgid "Webcam error"\r
msgstr "Ошибка веб-камеры"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr "Загрузка пути для отображения (%d%%)"\r
msgstr "Ошибка 3D окна"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Качество"\r
\r
"Используется в комбинации с диаметром сопла для определения количества\n"\r
"линий периметра и толщины этих линий."\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Откат"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Включить откат"\r
"Лучше вписать сюда значение произведения высоты слоя и целого числа, "\r
"примерно равное толщине стенки."\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Заполнение"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Плотность заполнения"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Скорость и температура"\r
\r
msgstr "Температура печати (С)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Температура сопла 4 (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Температура сопла 3 (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Температура стола (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr "Температура подогреваемого стола. Установите 0 для ручного нагрева."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "Нет"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "От поверхности"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "Везде"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Поддержка"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Тип поддержки"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"стол.\n"\r
"Везде - создает поддержку в том числе с опорой на модель."\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Кайма"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Подложка"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Тип прилипания к столу"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"между ней и объектом.\n"\r
"(Кайма и подложка отменяют рамку)"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "Оба"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "Первый экструдер"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "Второй экструдер"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Поддержка двух экструдеров"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"Это потребует более частых переключений. \n"\r
"Вы также можете использовать второй экструдер для растворимой поддержки."\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "Двойная экструзия"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr "Утиральная башня"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"соплами.\n"\r
"Предыдущее сопло выключается на башне, а новое начинает печать."\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "Объем утиральной башни (мм3 на слой)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"экструдера, независимо от высоты слоя.\n"\r
"Поэтому, чем тоньше слой, тем шире башня."\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "Защита от вытекания"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"некотором расстоянии от него.\n"\r
"Убирает вытекание из неиспользуемого сопла при печати двумя экструдерами."\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Нить"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Диаметр (мм)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"выдавливанию материала, меньшее значение приведет к большему выдавливанию "\r
"материала."\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Диаметр 2 (мм)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Диаметр нити для второго сопла. Используйте 0 для того же диаметра, как и у "\r
"первого сопла."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Диаметр 3 (мм)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Диаметр нити для третьего сопла. Используйте 0 для того же диаметра, как и у "\r
"первого сопла."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Диаметр 4 (мм)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Диаметр нити для четвертого сопла. Используйте 0 для того же диаметра, как и "\r
"у первого сопла."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Диаметр (мм)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Диаметр нити для третьего сопла. Используйте 0 для того же диаметра, как и у "\r
+"первого сопла."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Текучесть (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
"Компенсация текучести, количество выдавливаемого материала умножается на "\r
"этот коэффициент"\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Откат"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Скорость (мм/с)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"Скорость, с которой откатывается нить. Чем выше скорость, тем лучше, но "\r
"слишком большая скорость может закусить нить в головке."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Расстояние (мм)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
msgstr ""\r
"Длина отката, установите 0 для отсутствия. Значение 4,5 мм вполне нормально."\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Длина отката при двойной экструзии (мм)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"Длина отката при переключении сопел при двойной экструзии, установите 0 для "\r
"отсутствия отката. Значение 16 мм вполне нормально."\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Минимальное перемещение (мм)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Необходимо, чтобы откат не происходил слишком часто на маленькой площади "\r
"печати."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Включить обход"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
"Обход - это огибание отверстий головкой при перемещении во время печати. "\r
"Если обход выключен, принтер будет перемещать головку от начальной до "\r
"конечной точки напрямую и всегда с откатом."\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Минимальное выдавливание перед откатом (мм)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"Это предупреждает откаты практически на одном месте, приводящие к "\r
"закусыванию нити в головке."\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "Подъем по Z после отката (мм)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"Когда откат закончен, головка немного поднимется. Значение 0.075 - норма. "\r
"Эта опция хороша для дельта-принтеров."\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Начальная высота слоя (мм)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"Высота первого слоя. Более толстый слой легче прилипает. Установите в 0.0 "\r
"для слоя той же толщины, что и все остальные."\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
#, fuzzy\r
msgid "Initial layer line width (%)"\r
msgstr "Ширина линий переходного слоя (мм)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Обрезать объект снизу на (мм)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"Опускает объект на стол, может использоваться для объектов без плоской "\r
"поверхности снизу или для тех, чей верх не напечатался из-за ошибки."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Перекрытие для двойной экструзии (мм)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"Добавляет некоторое перекрытие для объектов, печатаемых двойной экструзией. "\r
"Это позволяет смешивать цвета вместе."\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Скорость"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Скорость перемещения (мм/с)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"Скорость, с которой происходят перемещения (возможна скорость 250 мм/с). "\r
"Некоторые принтеры могут пропускать шаги на высокой скорости."\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Скорость печати первого слоя (мм/с)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Скорость печати первого слоя, обычно ниже скорости печати остальных слоев "\r
"для лучшего прилипания слоя к столу."\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "Скорость заполнения (мм/с)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"Печать заполнения с более высокой скоростью сильно уменьшает время печати, "\r
"но может повлиять на качество."\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Скорость печати первого слоя (мм/с)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Скорость, с которой происходит заполнение. Если 0, равна скорости печати. "\r
+"Печать заполнения с более высокой скоростью сильно уменьшает время печати, "\r
+"но может повлиять на качество."\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Скорость печати внешней границы (мм/с)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"поверхности. Но большая разница в скорости печати внутренней и внешней "\r
"границы может дать отрицательный эффект."\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "Скорость печати внутренней границы (мм/с)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"печати. Лучше поставить среднее значение между скоростью печати внешней "\r
"границы и общей скоростью печати."\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Охлаждение"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Минимальное время на слой (сек)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"как начнется печать следующего слоя. Если слои будут печататься слишком "\r
"быстро, принтер замедлится, чтобы соответствовать данному значению."\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Включить охлаждающий вентилятор"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Включить охлаждающий вентилятор во время печати. Дополнительное охлаждение "\r
"от вентилятора позволяет печатать быстрее."\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Количество линий"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"рамку. Несколько линий рамки помогут лучше расписать экструдер для мелких "\r
"объектов."\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Начальное расстояние (мм)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"Расстояние между рамкой и объектом.\n"\r
"Это минимальное расстояние, последующие линии рамки будут расположены дальше."\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Минимальная длина (мм)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"добавит рамке еще линий для достижения минимальной длины.\n"\r
"Если количество линий 0, настройка игнорируется."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "Полный запуск вентилятора на высоте (мм)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"Высота, на которой вентилятор полностью запускается. На слоях ниже данного "\r
"скорость вентилятора линейно снижается с выключением на слое 0."\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Минимальная скорость вентилятора (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"максимальной. Минимальная скорость используется, если печать слоя не "\r
"замедляется из-за охлаждения на этой скорости."\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Максимальная скорость вентилятора (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"максимальной. Максимальная скорость используется, если печать слоя "\r
"замедляется из-за охлаждения на этой скорости более чем на 200%."\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Минимальная скорость печати (мм/с)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"начинается вытекание материала. Минимальная скорость борется с этим. Даже "\r
"если печать замедлится, она не будет медленнее данного значения."\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr "Подъем головки при охлаждении"\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
"Поднять головку, если минимальная скорость достигнута из-за необходимости "\r
"охлаждения, и подождать время до достижения минимального времени печати слоя."\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Заполнение"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Сплошное заполнение верхней грани"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"Создать полностью заполненную верхнюю грань, если false, верх заполнится "\r
"общей плотностью заполнения. Используется для чашек/ваз."\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Сплошное заполнение нижней грани"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Создать полностью заполненную нижнюю грань, если false, низ заполнится общей "\r
"плотностью заполнения. Используется для зданий."\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Перекрытие заполнения (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"Перекрытие заполнения и стенок. Небольшое перекрытие улучшает сцепление "\r
"стенок и заполнения."\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "Тип поддержки"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"Линии - стенки толщиной в одну нить, которые удаляются по одной за раз. Это "\r
"требует больше работы по удалению, но часто работает лучше сетки."\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "Угол нависания для поддержки (градусы)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
#, fuzzy\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"горизонтальным (поддержка для любых углов нависания), 90 градусов - "\r
"вертикаль (нет поддержки) (материал сверху)."\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Заполнение (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"Заполнение для поддержки, меньше заполнения дает более слабую поддержку, но "\r
"ее легче удалить. 15% нормальное значение."\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "Расстояние X/Y (мм)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"Расстояние поддержки от печатаемого объекта в направлениях X/Y.\n"\r
"0.7 мм дает нормальный результат, поддержка не прилипает к объекту."\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Расстояние Z (мм)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"расстояние позволяет легче удалить поддержку, но дает худшее качество "\r
"печати. 0.15 мм нормальное значение."\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr "Спиральная печать внешнего контура"\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
#, fuzzy\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"Спиральная печать распределяет перемещение по оси Z равномерно по всему "\r
"периметру и превращает сплошной объект в полый со сплошным основанием."\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Количество линий каймы"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"Количество линий каймы, большее число линий дает более широкую кайму и "\r
"лучшее прилипание, но снижает доступную площадь печати."\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Дополнительные поля (мм)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"Если подложка включена, данная настройка увеличит ее площадь. Это даст более "\r
"надежную подложку, но снизит доступную площадь печати."\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Расстояние между линиями (мм)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
msgstr "Расстояние между линиями подложки."\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Толщина базового слоя (мм)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr "Толщина базового слоя подложки."\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Ширина линий базового слоя (мм)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr "Ширина линий базового слоя подложки."\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Толщина переходного слоя (мм)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr "Толщина переходного слоя подложки."\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Ширина линий переходного слоя (мм)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr "Ширина линий переходного слоя подложки."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Начальная высота слоя (мм)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Ширина линий переходного слоя (мм)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Компенсация недостатков модели"\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Объединить все (Тип A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"сохранить некоторые внутренние пустоты. Тип В игнорирует все пустоты и "\r
"сохраняет только внешнюю форму каждого слоя."\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Объединить все (Тип В)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Сохранить открытые грани"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"окажется лучше. Как и все опции компенсации недостатков, результаты могут "\r
"различаться для разных моделей и давать лучший или худший эффект."\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Сильное сшивание"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"Как и все опции компенсации недостатков, результаты могут различаться для "\r
"разных моделей и давать лучший или худший эффект."\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Сохранить профиль печати при резке"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"После резки профиль печати сохраняется с именем [stl_file]_profile.ini в "\r
"папке модели."\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Стоимость (руб/кг)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr "Стоимость нити за кг, для оценки стоимости печати по весу"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Стоимость (руб/м)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr "Стоимость нити за метр, для оценки стоимости печати по длине пути"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "Автоопределение SD-карты"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"Автоопределение SD-карты. Вы можете отключить эту опцию, т.к. на некоторых "\r
"ОС внешние жесткие диски или флеш-карты определяются как SD-карты."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Проверять обновления"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Искать более новые версии Cura при запуске"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Отправлять анонимную статистику использование для улучшения будущих версий "\r
"Cura"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Плотность (кг/м3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"Вес 1 м3 нити. Около 1240 для PLA, около 1040 для ABS.Используется для "\r
"оценки веса печатаемой модели."\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
"Изменяет язык, с которым запускается Cura. Переключение языка требует "\r
"перезапуска Cura."\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Цвет модели"\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "Показывает цвет первого экструдера"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Цвет модели (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "Показывает цвет второго экструдера"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Цвет модели (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "Показывает цвет третьего экструдера"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Цвет модели (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "Показывает цвет четвертого экструдера"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "Тип окна печати"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "Выберите интерфейс для печати по USB."\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Максимальная ширина (мм)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Размер машины в мм"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Максимальная глубина (мм)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Максимальная высота (мм)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "Центр машины (0,0)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
"Прошивка машины задает 0,0 в центре стола вместо переднего левого угла "\r
"(обычно в дельта-принтерах)"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "Форма области печати"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "Форма области печати машины."\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Если у вас подогреваемый стол, включает настройки подогреваемого стола "\r
"(требуется перезапуск)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "Тип G-кода"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
#, fuzzy\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"машину, а не в слайсер.MakerBot G-код имеет несколько изменений, но пока что "\r
"требует MakerWare для создания X3G-файлов."\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Количество экструдеров"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Количество экструдеров на вашей машине."\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "Смещение по X"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "Смещение второго экструдера по сравнению с первым."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Смещение по Y"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "Смещение третьего экструдера по сравнению с первым."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "Смещение четвертого экструдера по сравнению с первым."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "Шагов на 1 мм нити"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Количество шагов на 1 мм нити при экструзии. Если 0, это значение "\r
"игнорируется и используется значение из прошивки."\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Последовательный порт"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Последовательный порт, используемый для связи с принтером"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Скорость передачи"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"Должна совпадать со значением в прошивке.\n"\r
"Обычные значения 250000, 115200, 57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "Размер головки в направлении нуля X (мм)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"Размер головки, измеряется от отверстия сопла до внешней части головки. "\r
"Нужен для поочередной печати нескольких объектов."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Размер головки в направлении нуля Y (мм)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"Размер головки, измеряется от отверстия сопла до внешней части головки. "\r
"Нужен для поочередной печати нескольких объектов."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "Размер головки в направлении максимума X (мм)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "Размер головки в направлении максимума Y (мм)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"Размер головки, измеряется от отверстия сопла до внешней части головки. "\r
"Нужен для поочередной печати нескольких объектов."\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Высота сопла (мм)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"Высота сопла, выступающая из головки. Если объекты выше, напечатать их по "\r
"очереди не удастся."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr "Текучесть больше 150% - редкое значение и не рекомендуется."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr "Текучесть меньше 50% - редкое значение и не рекомендуется."\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"Слои толще %.2f мм (80%% размера сопла) обычно приводят к плохим результатам "\r
"и не рекомендуются."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
msgstr "Нежелательно указывать скорость печати выше 150 мм/с"\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr "Осторожно, температуры выше 260С могут повредить вашу машину!"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"Вы уверены, что ваша нить такого диаметра? Обычно нить имеет диаметр около 3 "\r
"или 1.75 мм."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
msgstr "Нежелательно указывать скорость перемещения выше 300 мм/с"\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr ""\r
\r
+#~ msgid "High quality print"\r
+#~ msgstr "Высококачественная печать"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Печать с нормальным качеством"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Быстрая, низкокачественная печать"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Тонкостенная чашка или ваза"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Диаметр:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Только внешний вид"\r
+\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Скопировать профиль в буфер обмена"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "Запустить мастер начальных настроек..."\r
msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
"PO-Revision-Date: 2014-06-30 16:18+0200\n"\r
"Last-Translator: \n"\r
"Language-Team: LANGUAGE <LL@li.org>\n"\r
"X-Generator: Poedit 1.6.5\n"\r
"Language: en\n"\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr "Cura'nın yeni bir versiyonu hazır, indirmek ister misiniz ? "\r
\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
msgid "New version available"\r
msgstr "Yeni bir versiyon hazır"\r
\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Hangi tür cihaza sahipsiniz: "\r
\r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
#, fuzzy\r
msgid "Other machine information"\r
msgstr "Cihazın mm cinsinden boyutu"\r
\r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Sıradaki önceden-tanımlı cihaz profilleri hazır"\r
\r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
msgid ""\r
"Note that these profiles are not guaranteed to give good results,\n"\r
"or work at all. Extra tweaks might be required.\n"\r
" veya ekstra bir profil istiyorsanız lütfen bunu github issue tracker'a "\r
"bildirin. "\r
\r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
msgid "Custom..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
msgid "Cura Ready!"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura şimdi kullanıma hazır !"\r
\r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
#, fuzzy\r
msgid "Custom RepRap information"\r
msgstr "Anonim kullanıcı bilgisi yükle:"\r
\r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
"settings."\r
"RepRap cihazları büyük ölçüde farklı olabilir, bu yüzden buradan kendi "\r
"ayarlarınızı oluşturabilirsiniz."\r
\r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
msgid ""\r
"Be sure to review the default profile before running it on your machine."\r
msgstr ""\r
"Varsayılan profili cihazınıza yüklemeden önce gözden geçirdiğinize emin "\r
"olunuz."\r
\r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
msgid ""\r
"If you like a default profile for your machine added,\n"\r
"then make an issue on github."\r
"Eğer cihazınıza özel bir varsayılan profilin eklenmesini istiyorsanız bunu "\r
"github'a bildirin."\r
\r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
msgid "You will have to manually install Marlin or Sprinter firmware."\r
msgstr "Marlin veya Sprinter yazılımını manuel olarak yüklemelisiniz."\r
\r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
msgid "Machine name"\r
msgstr "Cihaz adı"\r
\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
msgid "Machine width (mm)"\r
msgstr "Cihaz eni (mm)"\r
\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
msgid "Machine depth (mm)"\r
msgstr "Cihaz derinliği (mm)"\r
\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
msgid "Machine height (mm)"\r
msgstr "Cihaz yüksekliği (mm)"\r
\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
msgid "Nozzle size (mm)"\r
msgstr "Baskı ucu çapı (mm)"\r
\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
msgid "Heated bed"\r
msgstr "Isınmış levha"\r
\r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
msgid "Bed center is 0,0,0 (RoStock)"\r
msgstr "Levha merkezi 0,0,0'dir (RoStock)."\r
\r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
msgid "Select your machine"\r
msgstr "Cihazınızı seçin"\r
\r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
msgid "What kind of machine do you have:"\r
msgstr "Hangi tür cihaza sahipsiniz: "\r
\r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
#, fuzzy\r
msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
msgstr "Diğer (Ör: RepRap, MakerBot)"\r
\r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
msgid ""\r
"The collection of anonymous usage information helps with the continued "\r
"improvement of Cura."\r
"Anonim kullanıcı bilgisi koleksiyonu Cura'nın sürekli gelişimine yardım "\r
"eder. "\r
\r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
msgid ""\r
"This does NOT submit your models online nor gathers any privacy related "\r
"information."\r
"Bu, modellerinizi online olarak paylaşmaz veya hakkınızda herhangi bir özel "\r
"bilgi toplamaz."\r
\r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
msgid "Submit anonymous usage information:"\r
msgstr "Anonim kullanıcı bilgisi yükle:"\r
\r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
msgstr "Tüm detaylar için: http://wiki.ultimaker.com/Cura:stats"\r
\r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
msgid "Select upgraded parts you have"\r
msgstr "Güncellediğiniz parçalarınızı seçiniz"\r
\r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
msgid ""\r
"To assist you in having better default settings for your Ultimaker\n"\r
"Cura would like to know which upgrades you have in your machine."\r
"olmak için \n"\r
"\vCura cihazınızda hangi güncellemelerin olduğunu bilmek istiyor."\r
\r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
msgid "Extruder drive upgrade"\r
msgstr "Extruder sürücü güncellemesi"\r
\r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
#, fuzzy\r
msgid "Heated printer bed (kit)"\r
msgstr "Isı"\r
\r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
msgid "Heated printer bed (self built)"\r
msgstr "Isı"\r
\r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
msgid "Dual extrusion (experimental)"\r
msgstr "Çift extrusion (deneysel)"\r
\r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
msgid ""\r
"If you have an Ultimaker bought after october 2012 you will have the\n"\r
"Extruder drive upgrade. If you do not have this upgrade,\n"\r
"cihazınızın güvenilirliğini arttırmak için bu güncellemeyi yapmanız "\r
"önerilir. "\r
\r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
msgid ""\r
"This upgrade can be bought from the Ultimaker webshop\n"\r
"or found on thingiverse as thing:26094"\r
"Bu güncelleme Ultimaker webshop'tan alınabilir \n"\r
" \vveya thingiverse'de thing:26094 olarak bulunabilir."\r
\r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
msgid "Upgrade Ultimaker Firmware"\r
msgstr "Ultimaker Firmware'ını Güncelle"\r
\r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
msgid ""\r
"Firmware is the piece of software running directly on your 3D printer.\n"\r
"This firmware controls the step motors, regulates the temperature\n"\r
"\vBu firmware step motorları kontrol eder, sıcaklığı ayarlar, \n"\r
"\vand sonuç olarak yazıcınızın çalışmasını sağlar."\r
\r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
msgid ""\r
"The firmware shipping with new Ultimakers works, but upgrades\n"\r
"have been made to make better prints, and make calibration easier."\r
"baskılar \n"\r
"\vyapılması ve kalibrasyonun daha kolay olması için güncellemeler yapıldı."\r
\r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
msgid ""\r
"Cura requires these new features and thus\n"\r
"your firmware will most likely need to be upgraded.\n"\r
"\vsahip olduğunuz firmware'ın güncellenmesi gerek.\vBirazdan bu güncellemeyi "\r
"yapma şansınız olacak. "\r
\r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
msgid "Do not upgrade to this firmware if:"\r
msgstr "Eğer sıradakiler geçerliyse bu firmware'a güncelleme:"\r
\r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
msgstr "*Eğer ATMega1280 (Rev 1 Machine) ile çalışan eski bir cihazınız varsa"\r
\r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
msgid "* Build your own heated bed"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
msgid "* Have other changes in the firmware"\r
msgstr "* Firmware ile ilgili başka değişikliklere sahipseniz"\r
\r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
msgid "Ultimaker Checkup"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
"You can skip these if you know your machine is functional."\r
"Şimdi Ultimaker'ınızda birkaç mantıklı denetleme yürütebilirsiniz. \n"\r
"\vAncak cihazınızın çalıştığına eminseniz bu adımı atlayabilirsiniz."\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Run checks"\r
msgstr "Denetlemeleri yürüt"\r
\r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
msgid "Skip checks"\r
msgstr "Denetlemeleri atla"\r
\r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
msgid "Communication:"\r
msgstr "İletişim:"\r
\r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
msgid "Temperature:"\r
msgstr "Sıcaklık:"\r
\r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
msgid "Endstops:"\r
msgstr "Durdurucular: "\r
\r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
msgid "Show error log"\r
msgstr "Hata seyir defterini göster"\r
\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
msgid "Connecting to machine."\r
msgstr "Cihaza bağlanılıyor."\r
\r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
msgid "Cooldown before temperature check."\r
msgstr "Sıcaklık denetlemesinden önce soğutma"\r
\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
msgid "Checking the heater and temperature sensor."\r
msgstr "Isıtıcıyı ve sıcaklık sensorünü denetleme."\r
\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
msgid "Please make sure none of the endstops are pressed."\r
msgstr "Lütfen hiçbir durdurucunun basılı olmadığına emin olunuz."\r
\r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
msgid "Temperature measurement FAILED!"\r
msgstr "Sıcaklık ölçümü HATALI!"\r
\r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
#, python-format\r
msgid "Head temperature: %d"\r
msgstr "Baskı ucu sıcaklığı: %d"\r
\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
#, python-format\r
msgid "Communication State: %s"\r
msgstr "İletişim durumu: %s"\r
\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
msgid "Failed to establish connection with the printer."\r
msgstr "Yazıcıyla bağlantı kurulamadı."\r
\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
msgid "Please press the left X endstop."\r
msgstr "Lütfen soldaki X durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
msgid "Please press the right X endstop."\r
msgstr "Lütfen sağdaki X durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
msgid "Please press the front Y endstop."\r
msgstr "Lütfen öndeki Y durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
msgid "Please press the top Z endstop."\r
msgstr "Lütfen üstteki Z durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
msgid "Please press the back Y endstop."\r
msgstr "Lütfen arkadaki Y durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
msgid "Checkup finished"\r
msgstr "Denetleme bitti"\r
\r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
msgid "Please press the bottom Z endstop."\r
msgstr "Lütfen alttaki Z durdurucusuna basınız."\r
\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
msgid "Ultimaker Calibration"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr ""\r
"Adımları her bir E için kalibre etmek bazı elle yapılması gereken eylemler "\r
"içerir. "\r
\r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
msgid "First remove any filament from your machine."\r
msgstr "Öncelikle cihazınızda bulunan herhangi bir filamenti kaldırın. "\r
\r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
msgid ""\r
"Next put in your filament so the tip is aligned with the\n"\r
"top of the extruder drive."\r
"Filamentinizi, ucu filament iticinin üst kısmı ike aynı hizaya gelecek "\r
"şekilde içeriye sokunuz. "\r
\r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
msgid "We'll push the filament 100mm"\r
msgstr "Filament 100 mm itilecek"\r
\r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
msgid "Extrude 100mm filament"\r
msgstr "Filamenti 100 mm baskı ucundan çıkar"\r
\r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
msgid ""\r
"Now measure the amount of extruded filament:\n"\r
"(this can be more or less then 100mm)"\r
"Şimdi extrude edilmiş filament miktarını giriniz: \n"\r
"\v(Bu 100 mm'den fazla ya da az olabilir.)"\r
\r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
msgid "Save"\r
msgstr "Kaydet"\r
\r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
msgid "This results in the following steps per E:"\r
msgstr "Bu E başına sıradaki adımlarla sonuçlanır:"\r
\r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
msgid "You can repeat these steps to get better calibration."\r
msgstr "Daha iyi bir kalibrasyon için bu adımları tekrarlayabilirsiniz."\r
\r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
msgid ""\r
"If you still have filament in your printer which needs\n"\r
"heat to remove, press the heat up button below:"\r
"Eğer yazıcınızda çıkarılmak için ısıtılması gereken \n"\r
"\vfilament varsa, alttaki ısıtma butonuna basınız. "\r
\r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
msgid "Heatup for filament removal"\r
msgstr "Filament çıkarılması için ısıt"\r
\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
msgid ""\r
"Error: Failed to open serial port to machine\n"\r
"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
"\vEğer bu hata tekrar ederse, bağlantıyı kopardıktan sorna USB kablosunu "\r
"yeniden takmanız önerilir. "\r
\r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
msgid "Ultimaker2"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Ultimaker2."\r
msgstr "Cura şimdi kullanıma hazır !"\r
\r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
msgid "Lulzbot TAZ/Mini"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
#, fuzzy\r
msgid "Cura is now ready to be used with your Lulzbot."\r
msgstr "Cura şimdi kullanıma hazır !"\r
\r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
msgid "Configuration Wizard"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
#, fuzzy\r
msgid "Bed leveling wizard"\r
msgstr "Baskı levhası hizalama yazılımını aç..."\r
\r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
#, fuzzy\r
msgid "This wizard will help you in leveling your printer bed"\r
msgstr "Sihirbaz cihazınıza Cura'yı kurmanıza yardım ediyor"\r
\r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
#, fuzzy\r
msgid "It will do the following steps"\r
msgstr "Bu E başına sıradaki adımlarla sonuçlanır:"\r
\r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
msgid "* Move the printer head to each corner"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
msgid " and let you adjust the height of the bed to the nozzle"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
msgid "* Print a line around the bed to check if it is level"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
#, fuzzy\r
msgid "Connect to printer"\r
msgstr "Cihaza bağlanılıyor."\r
\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
#, fuzzy\r
msgid "Resume"\r
msgstr "En basa al"\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Up 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
msgid "Down 0.2mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Up 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
msgid "Down 10mm"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
msgid "Homing printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
msgid "Moving head to back center..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
msgid "Moving head to back left corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
msgid "Moving head to front right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
msgid "Moving head to back right corner..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
msgid "Heating up printer..."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
msgid "Printing a square on the printer bed at 0.3mm height."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
msgid ""\r
"Adjust the front left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
msgid ""\r
"Adjust the back screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
msgid ""\r
"Adjust the back left screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
msgid ""\r
"Adjust the back right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
msgid ""\r
"Adjust the front right screw of your printer bed\n"\r
"So the nozzle just hits the bed."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
#, python-format\r
msgid "Heating up printer: %d/%d"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
msgid ""\r
"The printer is hot now. Please insert some PLA filament into the printer."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
msgid ""\r
"Calibration finished.\n"\r
"The squares on the bed should slightly touch each other."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
#, fuzzy\r
msgid ""\r
"This wizard will help you in calibrating the printer head offsets of your "\r
"dual extrusion machine"\r
msgstr "Sihirbaz cihazınıza Cura'yı kurmanıza yardım ediyor"\r
\r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
msgid "Printing initial calibration cross"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
msgid ""\r
"Please measure the distance between the horizontal lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
msgid "Printing the fine calibration lines."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
msgid ""\r
"Which horizontal line number lays perfect on top of each other? Front most "\r
"line is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
#, python-format\r
msgid "Calibration finished. Offsets are: %s %s"\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
msgid "Please load both extruders with PLA."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
msgid "Homing printer and heating up both extruders."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
msgid "Please measure the distance between the vertical lines in millimeters."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
msgid ""\r
"Which vertical line number lays perfect on top of each other? Leftmost line "\r
"is zero."\r
msgstr ""\r
\r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
msgid "Head offset wizard"\r
msgstr ""\r
\r
msgid "Expert config"\r
msgstr "Gelişmiş"\r
\r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Üzgünüz, ancak Cura cihazınızın konfigürasyonuna uygun bir firmware ile "\r
"birlikte gelmez. "\r
\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
msgid "Firmware update"\r
msgstr "Firmware güncellemesi"\r
\r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"destekler. \n"\r
"\vBu yüzden RepRap'inizi Cura ile güncellemek işe yaramayabilir. "\r
\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
msgid "OK"\r
msgstr "Tamam"\r
\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
msgid "Reading firmware..."\r
msgstr "Firmware okunuyor..."\r
\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
msgid "Connecting to machine..."\r
msgstr "Cihaza bağlanılıyor..."\r
\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Lütfen yazıcınızı USB kablosuyla \n"\r
"\vbilgisayarınıza bağlayınız."\r
\r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Firmware güncellemesi için cihaz bulunamadı. \n"\r
"\vCihazınız bilgisayarınıza bağlı mı ?"\r
\r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UMO firmware on an UM2 or UMO+?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
msgid ""\r
"Failed to install firmware:\n"\r
"This firmware is not compatible with this machine.\n"\r
"Trying to install UM2 or UMO+ firmware on an UMO?"\r
msgstr ""\r
\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
msgid "Uploading firmware..."\r
msgstr "Firmware yükleniyor..."\r
\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Hazır!\n"\r
"\vFirmware kuruldu: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
msgid "Failed to write firmware.\n"\r
msgstr "Firmware yazma hatası. \n"\r
\r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
#, fuzzy\r
msgid "Failed to connect to programmer.\n"\r
msgstr "YouMagine.com'a bağlanılamadı"\r
msgid "Print...\tCTRL+P"\r
msgstr "Yazdır...\tCTRL+P"\r
\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
msgid "Save GCode..."\r
msgstr "G-Kod'u kaydet..."\r
\r
msgid "Save Profile..."\r
msgstr "Profili kaydet..."\r
\r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
msgid "Load Profile from GCode..."\r
msgstr "G-Koddan profil yükle"\r
\r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
msgid "Reset Profile to default"\r
msgstr "Profili varsayılana ayarla"\r
\r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Tercihler...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
msgid "Machine settings..."\r
msgstr "Cihaz ayarları..."\r
\r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
msgid "Recent Model Files"\r
msgstr "Son Model Dosyaları"\r
\r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
msgid "Recent Profile Files"\r
msgstr "Son Profil Dosyaları"\r
\r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
msgid "Quit"\r
msgstr "Çık"\r
\r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
msgid "File"\r
msgstr "Dosya"\r
\r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
msgid "Minecraft map import..."\r
msgstr "Minecraft haritası ekle..."\r
\r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
msgid "PID Debugger..."\r
msgstr "PID Debug edici..."\r
\r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
#, fuzzy\r
msgid "Auto Firmware Update..."\r
msgstr "Firmware güncellemesi"\r
\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Profili panoya kopyala"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
msgid "Print all at once"\r
msgstr "Hepsini aynı anda bas"\r
\r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
msgid "Print one at a time"\r
msgstr "Birer birer bas"\r
\r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
msgid "Tools"\r
msgstr "Araçlar"\r
\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
msgid "Machine"\r
msgstr "Cihaz"\r
\r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
msgid "Switch to quickprint..."\r
msgstr "Hızlı-baskıya geç..."\r
\r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
msgid "Switch to full settings..."\r
msgstr "Tam ayarlara geç..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Gelişmiş ayarları aç...\tCTRL+E"\r
\r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Run bed leveling wizard..."\r
msgstr "Baskı levhası hizalama yazılımını aç..."\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Run head offset wizard..."\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
msgid "Expert"\r
msgstr "Gelişmiş"\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
msgid "Online documentation..."\r
msgstr "Çevrimiçi belgeleme..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Report a problem..."\r
msgstr "Hata bildir..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
msgid "Check for update..."\r
msgstr "Güncellemeleri denetle..."\r
\r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
msgid "Open YouMagine website..."\r
msgstr "YouMagine sitesini aç..."\r
\r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
msgid "About Cura..."\r
msgstr "Cura hakkında..."\r
\r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
msgid "Help"\r
msgstr "Yardım"\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"\"Hepsini aynı anda bas\" baskı seçeneği için cihaz ayarlarına doğru yazıcı "\r
"başı boyutlarını ve gantry yüksekliği girmelisiniz."\r
\r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
msgid "One at a time warning"\r
msgstr "Her seferinde bir uyarı"\r
\r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
#, fuzzy\r
msgid "Add new machine..."\r
msgstr "Yeni cihaz sihirbazı ekle"\r
\r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
msgid "Install default firmware..."\r
msgstr "Varsayılan firmware'ı kur..."\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
msgid "Install custom firmware..."\r
msgstr "Özel firmware yükle..."\r
\r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
msgid "Select profile file to load"\r
msgstr "Yüklenecek profili seçiniz"\r
\r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
msgid "Select gcode file to load profile from"\r
msgstr "Profilin kendisinden yükleneceği gkodunu seçiniz"\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"\vBu özellik sadece Cura 12.07 ve daha yeni Cura versiyonları tarafından "\r
"oluşturulan G-Kod dosyaları için çalışır. "\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
msgid "Profile load error"\r
msgstr "Profil yükleme hatası"\r
\r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
msgid "Select profile file to save"\r
msgstr "Kaydedilecek profili seç"\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"kaybedilecektir! \n"\r
"\vGerçekten tüm profil ayarlarını sıfırlamak istiyor musunuz ? "\r
\r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
msgid "Profile reset"\r
msgstr "Profili yeniden başlat"\r
\r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Profili yeniden başlat"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Uyarı: Özel bir firmware yüklemek cihazınızın doğru çalışacağını "\r
"garantilemez ve cihazınıza zarar verebilir. "\r
\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
msgid "Open firmware to upload"\r
msgstr "Yüklenecek firmware aç"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "You are running the latest version of Cura!"\r
msgstr "Cura'nın en yeni versiyonunu kullanıyorsunuz!"\r
\r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
msgid "Awesome!"\r
msgstr "Mükemmel!"\r
\r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
msgid "Basic"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
msgid "Advanced"\r
msgstr ""\r
\r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
msgid "Plugins"\r
msgstr "Eklentiler"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Hata: eklenti seçilmedi"\r
\r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
#, fuzzy\r
msgid "Preferences"\r
msgstr "Tercihler...\tCTRL+,"\r
\r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
msgid "Print window"\r
msgstr "Baskı penceresi"\r
\r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
msgid "Colours"\r
msgstr "Renkler"\r
\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
msgid "Language"\r
msgstr "Dil"\r
\r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
msgid "Filament settings"\r
msgstr "Filament ayarları"\r
\r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
msgid "Cura settings"\r
msgstr "Cura ayarları"\r
\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
msgid "Machine settings"\r
msgstr "Cihaz ayarları"\r
\r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
msgid "Printer head size"\r
msgstr "Baskı başı büyüklüğü"\r
\r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
#, python-format\r
msgid "Extruder %d"\r
msgstr "Extruder &d"\r
\r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
msgid "Communication settings"\r
msgstr "İletişim ayarları"\r
\r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
msgid "Ok"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
#, fuzzy\r
msgid "Add new machine"\r
msgstr "Yeni cihaz sihirbazı ekle"\r
\r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
#, fuzzy\r
msgid "Remove machine"\r
msgstr "Cihazınızı seçin"\r
\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
#, fuzzy\r
msgid "Change machine name"\r
msgstr "Cihaz adı"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "Cura'daki son cihaz konfigürasyonu kaldırılamıyor"\r
\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
msgid "Machine remove error"\r
msgstr "Cihaz çıkarma hatası"\r
\r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
msgid "Connect"\r
msgstr "Bağlan"\r
\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
msgid "Print"\r
msgstr "Yazdır"\r
\r
msgid "Error log"\r
msgstr "Hata seyir defteri"\r
\r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
msgid "Load"\r
msgstr "Yükle"\r
\r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
msgid "Rotate"\r
msgstr "Döndür"\r
\r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
msgid "Scale"\r
msgstr "Ölçekle"\r
\r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
msgid "Mirror"\r
msgstr "Aynala"\r
\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
msgid "Reset"\r
msgstr "En basa al"\r
\r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
msgid "Lay flat"\r
msgstr "Düz yatir"\r
\r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
msgid "To max"\r
msgstr "Maksimuma"\r
\r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
msgid "Mirror X"\r
msgstr "X'e göre aynala"\r
\r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
msgid "Mirror Y"\r
msgstr "Y'e göre aynala"\r
\r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
msgid "Mirror Z"\r
msgstr "Z'ye göre aynala"\r
\r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
msgid "Scale X"\r
msgstr "X'e göre ölçekle"\r
\r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
msgid "Scale Y"\r
msgstr "Y'ye göre ölçekle"\r
\r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
msgid "Scale Z"\r
msgstr "Z'ye göre ölçekle"\r
\r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
msgid "Size X (mm)"\r
msgstr "X boyutu (mm)"\r
\r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
msgid "Size Y (mm)"\r
msgstr "Y boyutu (mm)"\r
\r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
msgid "Size Z (mm)"\r
msgstr "Z boyutu (mm)"\r
\r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
msgid "Uniform scale"\r
msgstr "Boyut oranlarini koru"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "View mode"\r
msgstr "Görünüs modu"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Normal"\r
msgstr "Normal"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Overhang"\r
msgstr "Asili Kisim (Overhang)"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Transparent"\r
msgstr "Saydam"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "X-Ray"\r
msgstr "X-Ray"\r
\r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
msgid "Layers"\r
msgstr "Katmanlar"\r
\r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
msgid "Share on YouMagine"\r
msgstr "YouMagine'da paylas"\r
\r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
msgid "Open 3D model"\r
msgstr "3B model aç"\r
\r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
msgid "Save 3D model"\r
msgstr "3B modeli kaydet"\r
\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
#, python-format\r
msgid "Print with %s"\r
msgstr "%s ile yazdır"\r
\r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
msgid "Slice engine log..."\r
msgstr "Dilimleme makinesi seyir defteri "\r
\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
msgid "Save toolpath"\r
msgstr "Ayarlamalari kaydet"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "The slicing engine reported the following"\r
msgstr "Dilimleme makinesi raporu"\r
\r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
msgid "Engine log..."\r
msgstr "Makine seyir defteri "\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "How many copies do you want?"\r
msgstr "Kaç tane kopya istiyorsunuz ? "\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Number of copies"\r
msgstr "Kopya sayısı"\r
\r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
msgid "Multiply"\r
msgstr "Çoğalt"\r
\r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
msgid "Center on platform"\r
msgstr "Platformun merkezine yerleştir"\r
\r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
msgid "Delete object"\r
msgstr "Nesneyi sil"\r
\r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
msgid "Multiply object"\r
msgstr "Nesneyi çoğalt"\r
\r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
msgid "Split object into parts"\r
msgstr "Nesneyi parçalara böl"\r
\r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
msgid "Dual extrusion merge"\r
msgstr ""\r
\r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
msgid "Delete all objects"\r
msgstr "Tüm nesneleri sil"\r
\r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
msgid "Reload all objects"\r
msgstr "Tüm nesneleri yeniden yükle"\r
\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Tüm nesneleri sil"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
msgid "Toolpath to SD"\r
msgstr "Ayarlamaları SD karta kaydet"\r
\r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
msgid "Overhang view not working due to lack of OpenGL shaders support."\r
msgstr ""\r
\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Yüksek kalite baskı"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normal kalite baskı"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Hızlı ve düşük kalite baskı"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "İnce duvarlı kupa bardak veya vazo:"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
msgid "Print support structure"\r
msgstr "Destek yapısı yazdır"\r
\r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
msgid "Select a quickprint profile:"\r
msgstr "Hızlı-baskı profili seçin:"\r
\r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
msgid "Material:"\r
msgstr "Malzeme: "\r
\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Çap:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
msgid "Other:"\r
msgstr "Diğer:"\r
\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Sadece dış taraf"\r
-\r
#: Cura/gui/tools/imageToMesh.py:28\r
msgid "Height (mm)"\r
msgstr "Yükseklik (mm)"\r
msgid "Webcam error"\r
msgstr "Webcam hatası"\r
\r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
#, python-format\r
msgid "Loading toolpath for visualization (%d%%)"\r
msgstr ""\r
msgstr "3B pencere hatası"\r
\r
#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Quality"\r
msgstr "Kalite"\r
\r
"\vBu baskı ucu boyutuyla birlikte çevre hatlarının \n"\r
"\vsayısını ve bu hatların kalınlığını belirlemek için kullanılır. "\r
\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Geri çekme"\r
+\r
#: Cura/util/profile.py:180\r
msgid "Enable retraction"\r
msgstr "Geri çekmeyi aktifleştir"\r
"parça elde etmek için bu değerin duvar kalınlığı değerine yakın olmasına "\r
"dikkat ediniz. "\r
\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Dolgu"\r
+\r
#: Cura/util/profile.py:182\r
msgid "Fill Density (%)"\r
msgstr "Doldurma yoğunluğu (%)"\r
\r
#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid "Speed and Temperature"\r
msgstr "Hız ve Sıcaklık"\r
\r
msgstr "Baskı sıcaklığı (C)"\r
\r
#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
msgid ""\r
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
"For PLA a value of 210C is usually used.\n"\r
msgstr "Dördüncü baskı ucu sıcaklığı (C)"\r
\r
#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Üçüncü baskı ucu sıcaklığı (C)"\r
+\r
+#: Cura/util/profile.py:190\r
msgid "Bed temperature (C)"\r
msgstr "Levha sıcaklığı (C)"\r
\r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
msgid ""\r
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
msgstr ""\r
"Isınmış baskı levhası için kullanılan sıcaklıktır. Önceden ısıtmak için 0'a "\r
"ayarlayınız."\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
msgid "None"\r
msgstr "Hiçbiri"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Touching buildplate"\r
msgstr "Baskı levhasına yapışık"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Everywhere"\r
msgstr "Heryere"\r
\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
msgid "Support"\r
msgstr "Destek"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid "Support type"\r
msgstr "Destek türü"\r
\r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
msgid ""\r
"Type of support structure build.\n"\r
"\"Touching buildplate\" is the most commonly used support setting.\n"\r
"dokunacağı yerlerde destek yapısı oluşturur. \n"\r
"\v\"Heryere\" ayarı nesnenin üst kısmı dahil her yere destek yapısı ekler. "\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
msgid "Brim"\r
msgstr "Kenar"\r
\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
msgid "Raft"\r
msgstr "Raft"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
msgid "Platform adhesion type"\r
msgstr "Platforma yapışma türü"\r
\r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
msgid ""\r
"Different options that help in preventing corners from lifting due to "\r
"warping.\n"\r
"\v(Kenar veya raft seçeneğini aktif etmenin etek seçeneğini engellediğini not "\r
"ediniz.) "\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Both"\r
msgstr "İkisi de"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "First extruder"\r
msgstr "İlk extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Second extruder"\r
msgstr "İkinci extruder"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid "Support dual extrusion"\r
msgstr "Çift extrusion destekleme"\r
\r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
msgid ""\r
"Which extruder to use for support material, for break-away support you can "\r
"use both extruders.\n"\r
"\vİkinci extruder'ı suda çözünen materyallerin çözünmesi için de "\r
"kullanabilirsiniz. "\r
\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
msgid "Dual extrusion"\r
msgstr "Çift extrusion"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid "Wipe&prime tower"\r
msgstr "Silme-başlatma kulesi"\r
\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
msgid ""\r
"The wipe-tower is a tower printed on every layer when switching between "\r
"nozzles.\n"\r
"\vYeni rengin basılması için ikinci baskı ucu kullanılmadan önce, önceki baskı "\r
"ucunun başı bu kule sayesinde temizlenir."\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid "Wipe&prime tower volume per layer (mm3)"\r
msgstr "Katman başına silme-başlatma kulesi (mm3)"\r
\r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
msgid ""\r
"The amount of material put in the wipe/prime tower.\n"\r
"This is done in volume because in general you want to extrude a\n"\r
"edilir.\vBu yüzden ince katmanlar kulenin daha fazla büyüyeceği anlamına "\r
"gelir. "\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid "Ooze shield"\r
msgstr "Sızma koruması"\r
\r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
msgid ""\r
"The ooze shield is a 1 line thick shell around the object which stands a few "\r
"mm from the object.\n"\r
"Sızma koruması kendisinden birkaç mm uzakta olan nesnenin etrafını saran bir "\r
"hat kalınlığındaki kabuktur. "\r
\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
msgid "Filament"\r
msgstr "Filament"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid "Diameter (mm)"\r
msgstr "Çap (mm)"\r
\r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
msgid ""\r
"Diameter of your filament, as accurately as possible.\n"\r
"If you cannot measure this value you will have to calibrate it, a higher "\r
"\vEğer bu değeri ölçemiyorsanız ,kalibre etmek zorundasınız: daha yüksek bir "\r
"sayı daha az extrusion, daha küçük bir sayı daha fazla extrusion oluşturur. "\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid "Diameter2 (mm)"\r
msgstr "Çap2 (mm)"\r
\r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
msgid ""\r
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"İkinci baskı ucu için filament çapınız: Birinci baskı ucuyla aynı çapta ise "\r
"0 giriniz."\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid "Diameter3 (mm)"\r
msgstr "Çap3 (mm)"\r
\r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
msgid ""\r
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Üçüncü baskı ucu için filament çapınız: Birinci baskı ucuyla aynı çapta ise "\r
"0 giriniz."\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid "Diameter4 (mm)"\r
msgstr "Çap (4)"\r
\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
msgid ""\r
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
"as for nozzle 1."\r
"Dördüncü baskı ucu için filament çapınız: Birinci baskı ucuyla aynı çapta "\r
"ise 0 giriniz."\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Çap (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Üçüncü baskı ucu için filament çapınız: Birinci baskı ucuyla aynı çapta ise "\r
+"0 giriniz."\r
+\r
+#: Cura/util/profile.py:202\r
msgid "Flow (%)"\r
msgstr "Akış (%)"\r
\r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
msgid ""\r
"Flow compensation, the amount of material extruded is multiplied by this "\r
"value"\r
msgstr ""\r
"Akış telafisi, dışarıya akıtılan materyalin miktarı bu değerle çarpılır"\r
\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Geri çekme"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid "Speed (mm/s)"\r
msgstr "Hız (mm/s)"\r
\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
msgid ""\r
"Speed at which the filament is retracted, a higher retraction speed works "\r
"better. But a very high retraction speed can lead to filament grinding."\r
"Filament geri çekme hızı. Yüksek bir hız iyi sonuçlar verir, ancak bu hız "\r
"eğer aşırı yüksek ise filamentiniz aşınabilir."\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid "Distance (mm)"\r
msgstr "Uzaklık (mm)"\r
\r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
msgid ""\r
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
"seems to generate good results."\r
"Geri çekme miktarı. Geri çekme olmasını istemiyorsanız 0 değerini giriniz. "\r
"4.50 değeri genellikle iyi sonuçlar verir. "\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid "Dual extrusion switch amount (mm)"\r
msgstr "Çift ekstrüzyon değişme miktarı (mm)"\r
\r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
msgid ""\r
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
"no retraction at all. A value of 16.0mm seems to generate good results."\r
"miktarı. Geri çekme olmasını istemiyorsanız 0 değerini giriniz. 16.00 mm "\r
"değeri iyi sonuçlar verir. "\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid "Minimum travel (mm)"\r
msgstr "Minimum hareket (mm)"\r
\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
msgid ""\r
"Minimum amount of travel needed for a retraction to happen at all. To make "\r
"sure you do not get a lot of retractions in a small area."\r
"Geri çekmenin meydana gelebilmesi için gereken minimum harekettir ve bu "\r
"sayede küçük bir alanda birden fazla geri çekme yapmak zorunda kalmazsınız."\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
msgid "Enable combing"\r
msgstr "Taramayı etkinleştir"\r
\r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
msgid ""\r
"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid "Minimal extrusion before retracting (mm)"\r
msgstr "Geri çekme işleminden önceki minimum ekstrüzyon (mm)"\r
\r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
msgid ""\r
"The minimal amount of extrusion that needs to be done before retracting "\r
"again if a retraction needs to happen before this minimal is reached the "\r
"bölgesinde gereğinden fazla geri çekme yapılmasını ve böylece filamentin "\r
"aşınmasını önler. "\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid "Z hop when retracting (mm)"\r
msgstr "Geri çekme sırasında Z eksenindeki sıçrama (mm)"\r
\r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
msgid ""\r
"When a retraction is done, the head is lifted by this amount to travel over "\r
"the print. A value of 0.075 works well. This feature has a lot of positive "\r
"buraya girilen miktarda yükselir. 0.075 değeri uygundur. Bu özelliğin delta "\r
"kuleleri üzerinde birçok olumlu etkisi vardır. "\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid "Initial layer thickness (mm)"\r
msgstr "Başlangıçtaki katman kalınlığı (mm)"\r
\r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
msgid ""\r
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
"baskı levhasına yapışmasını kolaylaştırır. Taban katmanının kalınlığını "\r
"diğer katmanlarınki ile aynı yapmak için 0.0 değerini giriniz. "\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
#, fuzzy\r
msgid "Initial layer line width (%)"\r
msgstr "Arayüz hattı eni (mm)"\r
\r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
msgid ""\r
"Extra width factor for the extrusion on the first layer, on some printers "\r
"it's good to have wider extrusion on the first layer to get better bed "\r
"adhesion."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid "Cut off object bottom (mm)"\r
msgstr "Nesne tabanı aralığı (mm)"\r
\r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
msgid ""\r
"Sinks the object into the platform, this can be used for objects that do not "\r
"have a flat bottom and thus create a too small first layer."\r
"Nesneleri platforma batırır ve bu düz bir tabanı olmayan nesneler için "\r
"kullanılabilir. Bu işlem sonucunda küçük bir taban katmanı oluşur."\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid "Dual extrusion overlap (mm)"\r
msgstr "Çift ekstrüzyon çakışması (mm)"\r
\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
msgid ""\r
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
"bonds the different colors together."\r
"Çift ekstrüzyon baskılarında belli bir miktar çakışan ekstrüzyon ekleyiniz. "\r
"Bu farklı renkleri birbirine daha iyi bağlar. "\r
\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
msgid "Speed"\r
msgstr "Hız"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid "Travel speed (mm/s)"\r
msgstr "Hareket hızı (mm/s)"\r
\r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
msgid ""\r
"Speed at which travel moves are done, a well built Ultimaker can reach "\r
"speeds of 250mm/s. But some machines might miss steps then."\r
"hareket hızlarına ulaşabilir, ancak bazı makineler bunun sonucunda bazı "\r
"adımları atlayabilir. "\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid "Bottom layer speed (mm/s)"\r
msgstr "Alt tabaka hızı (mm/s)"\r
\r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
msgid ""\r
"Print speed for the bottom layer, you want to print the first layer slower "\r
"so it sticks better to the printer bed."\r
"Taban katmanı basım hızıdır. Bu katmanı yavaş basmak sonrasında basılacak "\r
"olan nesnenin baskı levhasına yapışması açısından önemlidir. "\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid "Infill speed (mm/s)"\r
msgstr "İçdolgu hızı (mm/s)"\r
\r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
msgid ""\r
"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
"used for the infill. Printing the infill faster can greatly reduce printing "\r
"büyük ölçüde azaltabilir, ancak bu baskı kalitesini negatif olarak "\r
"etkileyebilir. "\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Alt tabaka hızı (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"İç dolgunun basım hızıdır. Eğer 0 değeri girilirse iç dolgunun basım hızı "\r
+"olarak genel baskı hızı geçerli olur. Dolguyu hızlı basmak baskı süresini "\r
+"büyük ölçüde azaltabilir, ancak bu baskı kalitesini negatif olarak "\r
+"etkileyebilir. "\r
+\r
+#: Cura/util/profile.py:219\r
msgid "Outer shell speed (mm/s)"\r
msgstr "Dış kabuk baskı hızı (mm/s)"\r
\r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
msgid ""\r
"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
"used. Printing the outer shell at a lower speed improves the final skin "\r
"oluşan nesne yüzü kalitesini arttırır. Ancak iç ve dış kabuk basım "\r
"hızlarının birbirinden çok farklı olması baskı kalitesini kötü etkiler. "\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid "Inner shell speed (mm/s)"\r
msgstr "İç kabuk baskı hızı (mm/s)"\r
\r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
msgid ""\r
"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
"used. Printing the inner shell faster then the outer shell will reduce "\r
"yazdırmak baskı süresini azaltır. Bu hızı dış kabuk basım hızı ve iç dolgu "\r
"basım hızı arasında bir değere ayarlamak önerilir. "\r
\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
msgid "Cool"\r
msgstr "Soğutma"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid "Minimal layer time (sec)"\r
msgstr "Minimum katman basım süresi (sn)"\r
\r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
msgid ""\r
"Minimum time spent in a layer, gives the layer time to cool down before the "\r
"next layer is put on top. If the layer will be placed down too fast the "\r
"basılırsa, yazıcı yeni katmana geçmeden önce en az buraya eklenen süre "\r
"boyunca bekler. "\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid "Enable cooling fan"\r
msgstr "Soğutucu fanı çalıştırın"\r
\r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
msgid ""\r
"Enable the cooling fan during the print. The extra cooling from the cooling "\r
"fan is essential during faster prints."\r
"Baskı sırasında soğutucu fanı etkinleştir. Hızlı baskılar sırasında soğutucu "\r
"fanın çalışması önemlidir. "\r
\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid "Line count"\r
msgstr "Hat sayacı"\r
\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
msgid ""\r
"The skirt is a line drawn around the object at the first layer. This helps "\r
"to prime your extruder, and to see if the object fits on your platform.\n"\r
"\v0 değerini girmek etek seçeneğini engeller. Küçük objeler basarken birden "\r
"fazla etek hattı extruder'ınızı başlatmanıza yardımcı olabilir. "\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid "Start distance (mm)"\r
msgstr "Başlangıç uzaklığı (mm)"\r
\r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
msgid ""\r
"The distance between the skirt and the first layer.\n"\r
"This is the minimal distance, multiple skirt lines will be put outwards from "\r
"\vBu minimum uzaklıktır, bu uzaklıktan itibaren dışarıya doğru birden fazla "\r
"etek hattı eklenebilir. "\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid "Minimal length (mm)"\r
msgstr "Minimum uzunluk (mm)"\r
\r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
msgid ""\r
"The minimal length of the skirt, if this minimal length is not reached it "\r
"will add more skirt lines to reach this minimal lenght.\n"\r
"eklenir. \n"\r
" \vNot: Eğer hat sayacı 0'a ayarlanırsa bu özellik yok sayılır."\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid "Fan full on at height (mm)"\r
msgstr "Açık-fan yüksekliği (mm)"\r
\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
msgid ""\r
"The height at which the fan is turned on completely. For the layers below "\r
"this the fan speed is scaled linearly with the fan off at layer 0."\r
"katmanlarda, fan hızı katman yüksekliği arttıkça doğrusal olarak "\r
"ölçeklendirilir - 0 katmanında 0 olacak şekilde. "\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid "Fan speed min (%)"\r
msgstr "Fan hızı dk (%)"\r
\r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"yavaşlatırsa, fan hızı maksimum ve minimum arası bir değer alır. Minimum fan "\r
"hızı, katman basım hızı soğutma nedeniyle yavaşlamazsa kullanılır. "\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid "Fan speed max (%)"\r
msgstr "Fan hızı max (%)"\r
\r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
msgid ""\r
"When the fan is turned on, it is enabled at this speed setting. If cool "\r
"slows down the layer, the fan is adjusted between the min and max speed. "\r
"fan hızı, katmanın %200'den fazla soğutma sebebiyle yavaşladığı durumda "\r
"kullanılır. "\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid "Minimum speed (mm/s)"\r
msgstr "Minimum hız (mm/s)"\r
\r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
msgid ""\r
"The minimal layer time can cause the print to slow down so much it starts to "\r
"ooze. The minimal feedrate protects against this. Even if a print gets "\r
"hızı bunu engeller. Söz konusu nesne hiçbir zaman buraya girdiğiniz değerden "\r
"daha yavaş yazdırılmaz. "\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid "Cool head lift"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
msgid ""\r
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
"the extra time so the minimal layer time is always hit."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Dolgu"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid "Solid infill top"\r
msgstr "Tavan katı dolgu"\r
\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
msgid ""\r
"Create a solid top surface, if set to false the top is filled with the fill "\r
"percentage. Useful for cups/vases."\r
"Katı tavan katmanı oluştur.\vEğer seçilmezse nesne tavanı iç dolgu oranı ile "\r
"aynı oranda doldurulur. Kupa bardak veya vazolar için kullanışlıdır. "\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid "Solid infill bottom"\r
msgstr "Taban katı dolgu"\r
\r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
msgid ""\r
"Create a solid bottom surface, if set to false the bottom is filled with the "\r
"fill percentage. Useful for buildings."\r
"Katı taban katmanı oluştur.\vEğer seçilmezse nesne tabanı iç dolgu oranı ile "\r
"aynı oranda doldurulur. Yapı ve binalar için kullanışlıdır. "\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid "Infill overlap (%)"\r
msgstr "Dolgu çakışması (%)"\r
\r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
msgid ""\r
"Amount of overlap between the infill and the walls. There is a slight "\r
"overlap with the walls and the infill so the walls connect firmly to the "\r
"bağlanabilmesi için duvarlar ve dolgular az bir miktarda çakışır veya üst "\r
"üste biner. "\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid "Structure type"\r
msgstr "Destek türü(%)"\r
\r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
msgid ""\r
"The type of support structure.\n"\r
"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
"bazen gereğinden fazla güçlüdür. \n"\r
"\v"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
msgid "Overhang angle for support (deg)"\r
msgstr "Destek için askı açısı (derece)"\r
\r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
#, fuzzy\r
msgid ""\r
"The minimal angle that overhangs need to have to get support. With 90 degree "\r
"0 derece yatay ve 90 derece dikey olmak üzere, askılı yapıların destek "\r
"alması için ihtiyaçları olan minimum açı."\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
msgid "Fill amount (%)"\r
msgstr "Dolgu miktarı (%)"\r
\r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
#, python-format\r
msgid ""\r
"Amount of infill structure in the support material, less material gives "\r
"çıkarılabilen destek yapısı oluşturur. Yüzde 15 destek iç dolgusu optimum "\r
"bir değerdir. "\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid "Distance X/Y (mm)"\r
msgstr "X/Y Mesafesi (mm)"\r
\r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
msgid ""\r
"Distance of the support material from the print, in the X/Y directions.\n"\r
"0.7mm gives a nice distance from the print so the support does not stick to "\r
"Destek ile baskı arasındaki X/Y yönlerindeki uzaklıktır. \n"\r
"\v0.15 mm destek yapısının baskıya yapışmaması için ideal bir uzaklıktır. "\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid "Distance Z (mm)"\r
msgstr "Z Mesafesi (mm)"\r
\r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
msgid ""\r
"Distance from the top/bottom of the support to the print. A small gap here "\r
"makes it easier to remove the support but makes the print a bit uglier.\n"\r
"olabilir. \n"\r
"\v0.15 mm destek yapısının kolayca ayrılması için idealdir. "\r
\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
msgid "Black Magic"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid "Spiralize the outer contour"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
msgid ""\r
"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
"steady Z increase over the whole print. This feature turns a solid object "\r
"This feature used to be called Joris in older versions."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid "Only follow mesh surface"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
msgid ""\r
"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
"infill, no top/bottom, nothing."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid "Brim line amount"\r
msgstr "Kenar hattı miktarı"\r
\r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
msgid ""\r
"The amount of lines used for a brim, more lines means a larger brim which "\r
"sticks better, but this also makes your effective print area smaller."\r
"kenar anlamına gelir, bu da yapışmayı kolaylaştırır. Ancak aynı anda "\r
"kullanabileceğiniz etkin baskı alanını azaltır. "\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid "Extra margin (mm)"\r
msgstr "Ekstra kenar boşluğu (mm)"\r
\r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
msgid ""\r
"If the raft is enabled, this is the extra raft area around the object which "\r
"is also rafted. Increasing this margin will create a stronger raft while "\r
"daha fazla materyal kullanır ve diğer olası baskılar için daha az baskı "\r
"alanı bırakır. "\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid "Line spacing (mm)"\r
msgstr "Hat yerleşimi (mm)"\r
\r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
msgid ""\r
"When you are using the raft this is the distance between the centerlines of "\r
"the raft line."\r
"Raft kullandığınızda bu, raft hatlarının merkez hatları arasındaki "\r
"uzaklıktır. "\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid "Base thickness (mm)"\r
msgstr "Taban kalınlığı (mm)"\r
\r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
msgid ""\r
"When you are using the raft this is the thickness of the base layer which is "\r
"put down."\r
msgstr "Raft kullandığınızda bu, taban katmanının kalınlığıdır. "\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid "Base line width (mm)"\r
msgstr "Taban hattı eni (mm)"\r
\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
msgid ""\r
"When you are using the raft this is the width of the base layer lines which "\r
"are put down."\r
msgstr "Raft kullandığınızda bu, taban katmanı hatlarının enidir. "\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid "Interface thickness (mm)"\r
msgstr "Arayüz kalınlığı (mm)"\r
\r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
msgid ""\r
"When you are using the raft this is the thickness of the interface layer "\r
"which is put down."\r
msgstr "Raft kullandığınızda bu, arayüz katmanının kalınlığıdır. "\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid "Interface line width (mm)"\r
msgstr "Arayüz hattı eni (mm)"\r
\r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
msgid ""\r
"When you are using the raft this is the width of the interface layer lines "\r
"which are put down."\r
msgstr "Raft kullandığınızda bu, arayüz katmanı hatlarının enidir."\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
msgid "Gap between the last layer of the raft the whole print."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid "First Layer Airgap"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
msgid ""\r
"Gap between the last layer of the raft and the first printing layer. A small "\r
"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
"value is added on top of the 'Airgap' setting."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid "Surface layers"\r
msgstr ""\r
\r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
msgid ""\r
"Amount of surface layers put on top of the raft, these are fully filled "\r
"layers on which the model is printed."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
#, fuzzy\r
msgid "Surface layer thickness (mm)"\r
msgstr "Başlangıçtaki katman kalınlığı (mm)"\r
\r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
msgid "Thickness of each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
#, fuzzy\r
msgid "Surface layer line width (mm)"\r
msgstr "Arayüz hattı eni (mm)"\r
\r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
msgid "Width of the lines for each surface layer."\r
msgstr ""\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
msgid "Fix horrible"\r
msgstr "Riskli onarım "\r
\r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
msgid "Combine everything (Type-A)"\r
msgstr "Her şeyi birleştir (Type-A)"\r
\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
msgid ""\r
"This expert option adds all parts of the model together. The result is "\r
"usually that internal cavities disappear. Depending on the model this can be "\r
"Type-B bütün iç boşlukları görmezden gelir ve sadece dış şekli katman olarak "\r
"kabul eder. "\r
\r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
msgid "Combine everything (Type-B)"\r
msgstr "Her şeyi birleştir (Type-B)"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid "Keep open faces"\r
msgstr "Açık yüzleri koru"\r
\r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
msgid ""\r
"This expert option keeps all the open bits of the model intact. Normally "\r
"Cura tries to stitch up small holes and remove everything with big holes, "\r
"seçeneklerinde olduğu gibi, sonuçlar değişebilir. Kendi sorumluluğunuz "\r
"altında kullanınız.\v"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid "Extensive stitching"\r
msgstr "Yoğun onarım"\r
\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
msgid ""\r
"Extensive stitching tries to fix up open holes in the model by closing the "\r
"hole with touching polygons. This algorthm is quite expensive and could "\r
"seçeneklerinde olduğu gibi, sonuçlar değişebilir. Kendi sorumluluğunuz "\r
"altında kullanınız. "\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid "Save profile on slice"\r
msgstr "Profili dilime kaydet"\r
\r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
msgid ""\r
"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
msgstr ""\r
"Dilimleme (slicing) yaptığınız zaman profili modelin yanına [stl_file]"\r
"_profile.ini olarak kaydedin."\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost (price/kg)"\r
msgstr "Maliyet (fiyat/kg)"\r
\r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
msgstr ""\r
"Son baskının maliyetini belirlemek için, filamentinizin kilogram başına "\r
"maliyeti: "\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid "Cost (price/m)"\r
msgstr "Maliyet (fiyat/m)"\r
\r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
msgid ""\r
"Cost of your filament per meter, to estimate the cost of the final print."\r
msgstr ""\r
"Son baskının maliyetini belirlemek için, filamentinizin metre başına "\r
"maliyeti: "\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid "Auto detect SD card drive"\r
msgstr "SD kart sürücüsünü otomatik olarak belirle"\r
\r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
msgid ""\r
"Auto detect the SD card. You can disable this because on some systems "\r
"external hard-drives or USB sticks are detected as SD card."\r
"bazı sistemler dışarıdan takılan hard-disk veya USB bellekleri SD kart "\r
"olarak algılar."\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
msgid "Check for updates"\r
msgstr "Güncellemeleri denetle"\r
\r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
msgid "Check for newer versions of Cura on startup"\r
msgstr "Başlangıçta Cura'nın yeni bir versiyonunun olup olmadığını denetle"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Send usage statistics"\r
msgstr "Kullanım istatistikleri gönder"\r
\r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
msgid "Submit anonymous usage information to improve future versions of Cura"\r
msgstr ""\r
"Cura'nın gelecekteki versiyonlarını geliştirmek için anonim kullanıcı "\r
"bilgisi gönder"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid "Density (kg/m3)"\r
msgstr "Yoğunluk (kg/m3)"\r
\r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
msgid ""\r
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
"This value is used to estimate the weight if the filament used for the print."\r
"gramdır. Bu değerler yazdırılan baskının ağırlığını hesaplamak için "\r
"kullanılır. "\r
\r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
msgid ""\r
"Change the language in which Cura runs. Switching language requires a "\r
"restart of Cura"\r
"Cura'nın dilini değiştirin. Dil değişimi programın yeniden başlatılmasını "\r
"gerektirir. "\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Model colour"\r
msgstr "Model rengi "\r
\r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
msgid "Display color for first extruder"\r
msgstr "İlk extruder için display rengi"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Model colour (2)"\r
msgstr "Model rengi (2)"\r
\r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
msgid "Display color for second extruder"\r
msgstr "İkinci extruder için display rengi"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Model colour (3)"\r
msgstr "Model rengi (3)"\r
\r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
msgid "Display color for third extruder"\r
msgstr "Üçüncü extruder için display rengi"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Model colour (4)"\r
msgstr "Model rengi (4)"\r
\r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
msgid "Display color for forth extruder"\r
msgstr "Dördüncü extruder için display rengi"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Printing window type"\r
msgstr "Baskı penceresi türü"\r
\r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
msgid "Select the interface used for USB printing."\r
msgstr "USB yazdırma için kullanılan arayüzü seçiniz."\r
\r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
msgid "Maximum width (mm)"\r
msgstr "Maksimum en (mm)"\r
\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
msgid "Size of the machine in mm"\r
msgstr "Cihazın mm cinsinden boyutu"\r
\r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
msgid "Maximum depth (mm)"\r
msgstr "Maksimum derinlik (mm)"\r
\r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
msgid "Maximum height (mm)"\r
msgstr "Maksimum yükseklik (mm)"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid "Machine center 0,0"\r
msgstr "Cihaz merkezi 0,0"\r
\r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
msgid ""\r
"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
"left corner."\r
"Cihazın firmware'ı ön sol köşe yerine baskı levhasının merkezini 0,0 olarak "\r
"tanımlar. "\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "Build area shape"\r
msgstr "Baskı alanı şekli"\r
\r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
msgid "The shape of machine build area."\r
msgstr "Cihazın baskı alanı şekli."\r
\r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
msgid ""\r
"If you have an heated bed, this enabled heated bed settings (requires "\r
"restart)"\r
"Eğer baskı levhası zaten ısıtılmış ise, bu ısıtılmış levha ayarlarını "\r
"aktifleştirir (yeniden başlatma gerektirir)."\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
msgid "GCode Flavor"\r
msgstr "G-Kod türü (flavor)"\r
\r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
#, fuzzy\r
msgid ""\r
"Flavor of generated GCode.\n"\r
"\vMakerBot G-Kodu G-Kod'un oluşturulma şekli ile ilgili birkaç değişikliğe "\r
"sahiptir, ancak yine de X3G oluşturmak için MakerWare'a ihtiyaç duyar. "\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Extruder count"\r
msgstr "Extruder sayacı"\r
\r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
msgid "Amount of extruders in your machine."\r
msgstr "Cihazınızdaki extruder sayısı."\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
msgid "Offset X"\r
msgstr "X'i dengele"\r
\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
msgid "The offset of your secondary extruder compared to the primary."\r
msgstr "İlkiyle karşılaştırıldığında ikinci extruder dengesi."\r
\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
msgid "Offset Y"\r
msgstr "Y'yi dengele"\r
\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
msgid "The offset of your tertiary extruder compared to the primary."\r
msgstr "İlkiyle karşılaştırıldığında üçünü extruder dengesi."\r
\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
msgid "The offset of your forth extruder compared to the primary."\r
msgstr "İlkiyle karşılaştırıldığında dördüncü extruder dengesi."\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid "E-Steps per 1mm filament"\r
msgstr "1 mm filament başına E-Adımlar"\r
\r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
msgid ""\r
"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
"ignored and the value in your firmware is used."\r
"Her bir mm filament extrusion'u için adım sayısı. Bu değer 0 olarak "\r
"ayarlanırsa hesaba katılmaz ve firmware'ınızdaki varsayılan ayar uygulanır. "\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port"\r
msgstr "Seri port"\r
\r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
msgid "Serial port to use for communication with the printer"\r
msgstr "Yazıcıyla iletişime geçmek için kullanılacak seri port"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid "Baudrate"\r
msgstr "Baud oranı"\r
\r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
msgid ""\r
"Speed of the serial port communication\n"\r
"Needs to match your firmware settings\n"\r
"cihazınızın elektronik altyapısının yazılımına uyumlu olmalıdır \n"\r
"Yaygın değerler: 250000,115200,57600"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid "Head size towards X min (mm)"\r
msgstr "X minimumu doğrultusunda baskı başı boyutu (mm)"\r
\r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
"baskı başının dıştan diğer tarafına kadardır. Fanın sol tarafta bulunğu bir "\r
"Ultimaker için 75 mm'dir."\r
\r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
msgid "Head size towards Y min (mm)"\r
msgstr "Y minimumu doğrultusunda baskı başı boyutu (mm)"\r
\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
"baskı başının dıştan diğer tarafına kadardır. Fanın sol tarafta bulunğu bir "\r
"Ultimaker için 18 mm'dir."\r
\r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
msgid "Head size towards X max (mm)"\r
msgstr "X maksimumu doğrultusunda baskı başı boyutu (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid "Head size towards Y max (mm)"\r
msgstr "X maksimumu doğrultusunda baskı başı boyutu (mm)"\r
\r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
msgid ""\r
"The head size when printing multiple objects, measured from the tip of the "\r
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
"is on the left side."\r
msgstr "Birden fazla nesne basıyorsanız baskı ucu büyüklüğü"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid "Printer gantry height (mm)"\r
msgstr "Yazıcı gantry yüksekliği (mm)"\r
\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
msgid ""\r
"The height of the gantry holding up the printer head. If an object is higher "\r
"then this then you cannot print multiple objects one for one. 60mm for an "\r
"Baskı başını tutan gantry yüksekliği. Eğer bir nesne bundan daha yüksek ise, "\r
"birden fazla nesneyi teker teker basamazsınız. Ultimaker için 60 mm'dir."\r
\r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
#, python-format\r
msgid "More flow than 150% is rare and usually not recommended."\r
msgstr "Akışın % 150 den daha fazla olması nadirdir ve genellikle önerilmez."\r
\r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
#, python-format\r
msgid "Less flow than 50% is rare and usually not recommended."\r
msgstr "Akışın %50 den daha az olması nadirdir ve genellikle önerilmez. "\r
\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
#, python-format\r
msgid ""\r
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
"Tabakalarının %2fmm'den (baskı ucu büyüklüğünün 3/4'ünden) fazla olması "\r
"genellikle kötü sonuçlar verir ve önerilmez."\r
\r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
msgid ""\r
"It is highly unlikely that your machine can achieve a printing speed above "\r
"150mm/s"\r
"Cihazınızın 150 mm/s'nin üzerinde bir hareket hızına sahip olması olası "\r
"değildir. "\r
\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
msgid "Temperatures above 260C could damage your machine, be careful!"\r
msgstr ""\r
"260 C'den yüksek sıcaklıklar cihazınıza zarar verebilir, dikkatli olunuz !"\r
\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
msgid ""\r
"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
"1.75mm."\r
"Filamentinizin bu kadar kalın olduğuna emin misiniz ? Normal bir filament 3 "\r
"mm veya 1.75 mm'dir."\r
\r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
msgid ""\r
"It is highly unlikely that your machine can achieve a travel speed above "\r
"300mm/s"\r
"Cihazınızın 300 mm/s'nin üzerinde bir hareket hızına sahip olması olası "\r
"değildir. "\r
\r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
#, python-format\r
msgid ""\r
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
msgid "%0.2f meter %0.0f gram"\r
msgstr ""\r
\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Profili panoya kopyala"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Yüksek kalite baskı"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normal kalite baskı"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Hızlı ve düşük kalite baskı"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "İnce duvarlı kupa bardak veya vazo:"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Çap:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Sadece dış taraf"\r
+\r
#~ msgid "Run first run wizard..."\r
#~ msgstr "İlk açılış sihirbazını yürüt..."\r
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR David Braam
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: \n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"
-"PO-Revision-Date: 2015-01-13 12:42+0800\n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.7.3\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"Language: zh_CN\n"
-
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
-msgid "A new version of Cura is available, would you like to download?"
-msgstr ""
-
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
-msgid "New version available"
-msgstr ""
-
-#: Cura/gui/configWizard.py:231
-msgid "Add new machine wizard"
-msgstr "添加机型"
-
-#: Cura/gui/configWizard.py:233
-msgid "First time run wizard"
-msgstr "配置向导"
-
-#: Cura/gui/configWizard.py:234
-msgid "Welcome, and thanks for trying Cura!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:236
-msgid "This wizard will help you in setting up Cura for your machine."
-msgstr "配置向导将协助你为你的机型配置Cura"
-
-#: Cura/gui/configWizard.py:239
-msgid "Select your language:"
-msgstr "设置你的机型"
-
-#: Cura/gui/configWizard.py:266
-msgid "Older models"
-msgstr "打开3D模型"
-
-#: Cura/gui/configWizard.py:283
-msgid "Printrbot Selection"
-msgstr ""
-
-#: Cura/gui/configWizard.py:285
-msgid "Select which Printrbot machine you have:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:323
-msgid "Other machine information"
-msgstr ""
-
-#: Cura/gui/configWizard.py:324
-msgid "The following pre-defined machine profiles are available"
-msgstr ""
-
-#: Cura/gui/configWizard.py:325
-msgid ""
-"Note that these profiles are not guaranteed to give good results,\n"
-"or work at all. Extra tweaks might be required.\n"
-"If you find issues with the predefined profiles,\n"
-"or want an extra profile.\n"
-"Please report it at the github issue tracker."
-msgstr ""
-
-#: Cura/gui/configWizard.py:336
-msgid "Custom..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:354
-msgid "Cura Ready!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:355
-msgid "Cura is now ready to be used!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:359
-msgid "Custom RepRap information"
-msgstr ""
-
-#: Cura/gui/configWizard.py:360
-msgid ""
-"RepRap machines can be vastly different, so here you can set your own "
-"settings."
-msgstr ""
-
-#: Cura/gui/configWizard.py:361
-msgid ""
-"Be sure to review the default profile before running it on your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:362
-msgid ""
-"If you like a default profile for your machine added,\n"
-"then make an issue on github."
-msgstr ""
-
-#: Cura/gui/configWizard.py:364
-msgid "You will have to manually install Marlin or Sprinter firmware."
-msgstr ""
-
-#: Cura/gui/configWizard.py:366
-msgid "Machine name"
-msgstr "机型名称"
-
-#: Cura/gui/configWizard.py:367
-msgid "Machine width (mm)"
-msgstr "构建宽度"
-
-#: Cura/gui/configWizard.py:368
-msgid "Machine depth (mm)"
-msgstr "构建深度"
-
-#: Cura/gui/configWizard.py:369
-msgid "Machine height (mm)"
-msgstr "构建高度"
-
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183
-msgid "Nozzle size (mm)"
-msgstr "喷嘴孔径"
-
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514
-msgid "Heated bed"
-msgstr "热床"
-
-#: Cura/gui/configWizard.py:372
-msgid "Bed center is 0,0,0 (RoStock)"
-msgstr "平台中心为0,0,0"
-
-#: Cura/gui/configWizard.py:392
-msgid "Select your machine"
-msgstr "选择你的机型"
-
-#: Cura/gui/configWizard.py:393
-msgid "What kind of machine do you have:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:408
-msgid "Other (Ex: RepRap, MakerBot, Witbox)"
-msgstr "其他机型"
-
-#: Cura/gui/configWizard.py:411
-msgid ""
-"The collection of anonymous usage information helps with the continued "
-"improvement of Cura."
-msgstr ""
-
-#: Cura/gui/configWizard.py:412
-msgid ""
-"This does NOT submit your models online nor gathers any privacy related "
-"information."
-msgstr ""
-
-#: Cura/gui/configWizard.py:413
-msgid "Submit anonymous usage information:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:414
-msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
-msgstr ""
-
-#: Cura/gui/configWizard.py:531
-msgid "Select upgraded parts you have"
-msgstr ""
-
-#: Cura/gui/configWizard.py:532
-msgid ""
-"To assist you in having better default settings for your Ultimaker\n"
-"Cura would like to know which upgrades you have in your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:534
-msgid "Extruder drive upgrade"
-msgstr ""
-
-#: Cura/gui/configWizard.py:535
-msgid "Heated printer bed (kit)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:536
-msgid "Heated printer bed (self built)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:537
-msgid "Dual extrusion (experimental)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:539
-msgid ""
-"If you have an Ultimaker bought after october 2012 you will have the\n"
-"Extruder drive upgrade. If you do not have this upgrade,\n"
-"it is highly recommended to improve reliability."
-msgstr ""
-
-#: Cura/gui/configWizard.py:540
-msgid ""
-"This upgrade can be bought from the Ultimaker webshop\n"
-"or found on thingiverse as thing:26094"
-msgstr ""
-
-#: Cura/gui/configWizard.py:562
-msgid "Upgrade Ultimaker Firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:563
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer.\n"
-"This firmware controls the step motors, regulates the temperature\n"
-"and ultimately makes your printer work."
-msgstr ""
-
-#: Cura/gui/configWizard.py:565
-msgid ""
-"The firmware shipping with new Ultimakers works, but upgrades\n"
-"have been made to make better prints, and make calibration easier."
-msgstr ""
-
-#: Cura/gui/configWizard.py:567
-msgid ""
-"Cura requires these new features and thus\n"
-"your firmware will most likely need to be upgraded.\n"
-"You will get the chance to do so now."
-msgstr ""
-
-#: Cura/gui/configWizard.py:573
-msgid "Do not upgrade to this firmware if:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:574
-msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:575
-msgid "* Build your own heated bed"
-msgstr ""
-
-#: Cura/gui/configWizard.py:576
-msgid "* Have other changes in the firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:596
-msgid "Ultimaker Checkup"
-msgstr ""
-
-#: Cura/gui/configWizard.py:610
-msgid ""
-"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
-"You can skip these if you know your machine is functional."
-msgstr ""
-
-#: Cura/gui/configWizard.py:611
-msgid "Run checks"
-msgstr "运行检测"
-
-#: Cura/gui/configWizard.py:611
-msgid "Skip checks"
-msgstr "跳过检测"
-
-#: Cura/gui/configWizard.py:615
-msgid "Communication:"
-msgstr "通信:"
-
-#: Cura/gui/configWizard.py:616
-msgid "Temperature:"
-msgstr "温度:"
-
-#: Cura/gui/configWizard.py:617
-msgid "Endstops:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:622
-msgid "Show error log"
-msgstr "显示错误日志"
-
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093
-#: Cura/gui/configWizard.py:1312
-msgid "Connecting to machine."
-msgstr "正在连接打印机"
-
-#: Cura/gui/configWizard.py:677
-msgid "Cooldown before temperature check."
-msgstr ""
-
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690
-msgid "Checking the heater and temperature sensor."
-msgstr ""
-
-#: Cura/gui/configWizard.py:701
-msgid "Please make sure none of the endstops are pressed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:714
-msgid "Temperature measurement FAILED!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:719
-#, python-format
-msgid "Head temperature: %d"
-msgstr ""
-
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735
-#, python-format
-msgid "Communication State: %s"
-msgstr ""
-
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270
-#: Cura/gui/configWizard.py:1488
-msgid "Failed to establish connection with the printer."
-msgstr ""
-
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784
-msgid "Please press the left X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:779
-msgid "Please press the right X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:789
-msgid "Please press the front Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804
-msgid "Please press the top Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:799
-msgid "Please press the back Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824
-msgid "Checkup finished"
-msgstr ""
-
-#: Cura/gui/configWizard.py:818
-msgid "Please press the bottom Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862
-msgid "Ultimaker Calibration"
-msgstr ""
-
-#: Cura/gui/configWizard.py:867
-msgid "Calibrating the Steps Per E requires some manual actions."
-msgstr ""
-
-#: Cura/gui/configWizard.py:868
-msgid "First remove any filament from your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:869
-msgid ""
-"Next put in your filament so the tip is aligned with the\n"
-"top of the extruder drive."
-msgstr ""
-
-#: Cura/gui/configWizard.py:870
-msgid "We'll push the filament 100mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:871
-msgid "Extrude 100mm filament"
-msgstr ""
-
-#: Cura/gui/configWizard.py:872
-msgid ""
-"Now measure the amount of extruded filament:\n"
-"(this can be more or less then 100mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:873
-msgid "Save"
-msgstr "保存"
-
-#: Cura/gui/configWizard.py:874
-msgid "This results in the following steps per E:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:876
-msgid "You can repeat these steps to get better calibration."
-msgstr ""
-
-#: Cura/gui/configWizard.py:879
-msgid ""
-"If you still have filament in your printer which needs\n"
-"heat to remove, press the heat up button below:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:880
-msgid "Heatup for filament removal"
-msgstr ""
-
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939
-msgid ""
-"Error: Failed to open serial port to machine\n"
-"If this keeps happening, try disconnecting and reconnecting the USB cable"
-msgstr ""
-
-#: Cura/gui/configWizard.py:979
-msgid "Ultimaker2"
-msgstr ""
-
-#: Cura/gui/configWizard.py:980
-msgid "Congratulations on your the purchase of your brand new Ultimaker2."
-msgstr ""
-
-#: Cura/gui/configWizard.py:981
-msgid "Cura is now ready to be used with your Ultimaker2."
-msgstr ""
-
-#: Cura/gui/configWizard.py:986
-msgid "Lulzbot TAZ/Mini"
-msgstr ""
-
-#: Cura/gui/configWizard.py:987
-msgid "Cura is now ready to be used with your Lulzbot."
-msgstr ""
-
-#: Cura/gui/configWizard.py:992
-msgid "Configuration Wizard"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501
-msgid "Bed leveling wizard"
-msgstr "运行平台调平向导..."
-
-#: Cura/gui/configWizard.py:1055
-msgid "This wizard will help you in leveling your printer bed"
-msgstr "向导将协助你调平平台"
-
-#: Cura/gui/configWizard.py:1057
-msgid "It will do the following steps"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1058
-msgid "* Move the printer head to each corner"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1059
-msgid " and let you adjust the height of the bed to the nozzle"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1060
-msgid "* Print a line around the bed to check if it is level"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288
-msgid "Connect to printer"
-msgstr "正在连接打印机"
-
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294
-msgid "Resume"
-msgstr "恢复"
-
-#: Cura/gui/configWizard.py:1068
-msgid "Up 0.2mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1068
-msgid "Down 0.2mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1069
-msgid "Up 10mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1069
-msgid "Down 10mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1129
-msgid "Homing printer..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1139
-msgid "Moving head to back center..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1146
-msgid "Moving head to back left corner..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168
-msgid "Moving head to front right corner..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1161
-msgid "Moving head to back right corner..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1175
-msgid "Heating up printer..."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1182
-msgid "Printing a square on the printer bed at 0.3mm height."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1222
-msgid ""
-"Adjust the front left screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1227
-msgid ""
-"Adjust the back screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1229
-msgid ""
-"Adjust the back left screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1233
-msgid ""
-"Adjust the back right screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1237
-msgid ""
-"Adjust the front right screw of your printer bed\n"
-"So the nozzle just hits the bed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1241
-#, python-format
-msgid "Heating up printer: %d/%d"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1243
-msgid ""
-"The printer is hot now. Please insert some PLA filament into the printer."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1252
-msgid "Use the up/down buttons to move the bed and adjust your Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1264
-msgid ""
-"Calibration finished.\n"
-"The squares on the bed should slightly touch each other."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1285
-msgid ""
-"This wizard will help you in calibrating the printer head offsets of your "
-"dual extrusion machine"
-msgstr "向导将协助你，为你的机型配置Cura"
-
-#: Cura/gui/configWizard.py:1318
-msgid "Printing initial calibration cross"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1366
-msgid ""
-"Please measure the distance between the horizontal lines in millimeters."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1376
-msgid "Printing the fine calibration lines."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1431
-msgid ""
-"Which horizontal line number lays perfect on top of each other? Front most "
-"line is zero."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1442
-#, python-format
-msgid "Calibration finished. Offsets are: %s %s"
-msgstr ""
-
-#: Cura/gui/configWizard.py:1455
-msgid "Please load both extruders with PLA."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1464
-msgid "Homing printer and heating up both extruders."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1474
-msgid "Please measure the distance between the vertical lines in millimeters."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1481
-msgid ""
-"Which vertical line number lays perfect on top of each other? Leftmost line "
-"is zero."
-msgstr ""
-
-#: Cura/gui/configWizard.py:1530
-msgid "Head offset wizard"
-msgstr "运行喷头校正向导..."
-
-#: Cura/gui/expertConfig.py:27
-msgid "Expert config"
-msgstr "专业设置"
-
-#: Cura/gui/firmwareInstall.py:64
-msgid ""
-"I am sorry, but Cura does not ship with a default firmware for your machine "
-"configuration."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543
-msgid "Firmware update"
-msgstr "固件更新"
-
-#: Cura/gui/firmwareInstall.py:69
-msgid ""
-"Cura only supports firmware updates for ATMega2560 based hardware.\n"
-"So updating your RepRap with Cura might or might not work."
-msgstr ""
-"Cura仅支持基于ATmega2560的机型升级\n"
-"升级固件后也许大概有可能你的打印机无法正常工作"
-
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181
-msgid "OK"
-msgstr "确定"
-
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265
-msgid "Reading firmware..."
-msgstr "读取固件..."
-
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267
-msgid "Connecting to machine..."
-msgstr "连接到打印机..."
-
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271
-msgid ""
-"Please connect the printer to\n"
-"your computer with the USB cable."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:123
-msgid ""
-"Failed to find machine for firmware upgrade\n"
-"Is your machine connected to the PC?"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:130
-msgid ""
-"Failed to install firmware:\n"
-"This firmware is not compatible with this machine.\n"
-"Trying to install UMO firmware on an UM2 or UMO+?"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:136
-msgid ""
-"Failed to install firmware:\n"
-"This firmware is not compatible with this machine.\n"
-"Trying to install UM2 or UMO+ firmware on an UMO?"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293
-msgid "Uploading firmware..."
-msgstr "固件上传中..."
-
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296
-#, python-format
-msgid ""
-"Done!\n"
-"Installed firmware: %s"
-msgstr ""
-"完成!\n"
-"成功写入固件: %s"
-
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298
-msgid "Failed to write firmware.\n"
-msgstr "固件写入失败\n"
-
-#: Cura/gui/firmwareInstall.py:290
-msgid "Failed to connect to programmer.\n"
-msgstr "连接下载器失败\n"
-
-#: Cura/gui/mainWindow.py:72
-msgid "Load model file...\tCTRL+L"
-msgstr "读取模型文件...\tCTRL+L"
-
-#: Cura/gui/mainWindow.py:74
-msgid "Save model...\tCTRL+S"
-msgstr "保存模型...\tCTRL+S"
-
-#: Cura/gui/mainWindow.py:76
-msgid "Reload platform\tF5"
-msgstr "重新载入模型\tF5"
-
-#: Cura/gui/mainWindow.py:78
-msgid "Clear platform"
-msgstr "清除所有模型"
-
-#: Cura/gui/mainWindow.py:82
-msgid "Print...\tCTRL+P"
-msgstr "打印...\tCTRL+P"
-
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279
-msgid "Save GCode..."
-msgstr "保存GCode..."
-
-#: Cura/gui/mainWindow.py:86
-msgid "Show slice engine log..."
-msgstr "显示切片引擎记录..."
-
-#: Cura/gui/mainWindow.py:90
-msgid "Open Profile..."
-msgstr "打开配置文件..."
-
-#: Cura/gui/mainWindow.py:93
-msgid "Save Profile..."
-msgstr "保存配置文件..."
-
-#: Cura/gui/mainWindow.py:96
-msgid "Load Profile from GCode..."
-msgstr "从Gcode中读取配置文件..."
-
-#: Cura/gui/mainWindow.py:100
-msgid "Reset Profile to default"
-msgstr "恢复默认配置..."
-
-#: Cura/gui/mainWindow.py:105
-msgid "Preferences...\tCTRL+,"
-msgstr "偏好配置......\tCTRL+,"
-
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469
-msgid "Machine settings..."
-msgstr "机型设置..."
-
-#: Cura/gui/mainWindow.py:113
-msgid "Recent Model Files"
-msgstr "最近使用的模型文件"
-
-#: Cura/gui/mainWindow.py:120
-msgid "Recent Profile Files"
-msgstr "最近使用的配置文件"
-
-#: Cura/gui/mainWindow.py:126
-msgid "Quit"
-msgstr "退出"
-
-#: Cura/gui/mainWindow.py:128
-msgid "File"
-msgstr "文件"
-
-#: Cura/gui/mainWindow.py:136
-msgid "Minecraft map import..."
-msgstr "导入Minecraft地图..."
-
-#: Cura/gui/mainWindow.py:140
-msgid "PID Debugger..."
-msgstr "PID调试器..."
-
-#: Cura/gui/mainWindow.py:142
-msgid "Auto Firmware Update..."
-msgstr "固件自动更新..."
-
-#: Cura/gui/mainWindow.py:145
-msgid "Copy profile to clipboard"
-msgstr "复制配置到剪切板"
-
-#: Cura/gui/mainWindow.py:149
-msgid "Print all at once"
-msgstr "同时打印多个模型"
-
-#: Cura/gui/mainWindow.py:151
-msgid "Print one at a time"
-msgstr "逐个打印模型"
-
-#: Cura/gui/mainWindow.py:158
-msgid "Tools"
-msgstr "工具"
-
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183
-msgid "Machine"
-msgstr "机型"
-
-#: Cura/gui/mainWindow.py:167
-msgid "Switch to quickprint..."
-msgstr "切换到快速打印模式..."
-
-#: Cura/gui/mainWindow.py:171
-msgid "Switch to full settings..."
-msgstr "切换到完整配置模式..."
-
-#: Cura/gui/mainWindow.py:176
-msgid "Open expert settings...\tCTRL+E"
-msgstr "额外设置...\tCTRL+E"
-
-#: Cura/gui/mainWindow.py:180
-msgid "Run bed leveling wizard..."
-msgstr "运行平台调平向导..."
-
-#: Cura/gui/mainWindow.py:182
-msgid "Run head offset wizard..."
-msgstr "运行多喷头校正向导..."
-
-#: Cura/gui/mainWindow.py:185
-msgid "Expert"
-msgstr "专业设置"
-
-#: Cura/gui/mainWindow.py:188
-msgid "Online documentation..."
-msgstr "在线文档..."
-
-#: Cura/gui/mainWindow.py:190
-msgid "Report a problem..."
-msgstr "问题提交..."
-
-#: Cura/gui/mainWindow.py:192
-msgid "Check for update..."
-msgstr "检查更新..."
-
-#: Cura/gui/mainWindow.py:194
-msgid "Open YouMagine website..."
-msgstr "打开YouMagine网站..."
-
-#: Cura/gui/mainWindow.py:196
-msgid "About Cura..."
-msgstr "关于Cura..."
-
-#: Cura/gui/mainWindow.py:198
-msgid "Help"
-msgstr "帮助"
-
-#: Cura/gui/mainWindow.py:379
-msgid ""
-"For \"One at a time\" printing, you need to have entered the correct head "
-"size and gantry height in the machine settings"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:379
-msgid "One at a time warning"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:467
-msgid "Add new machine..."
-msgstr "添加机型..."
-
-#: Cura/gui/mainWindow.py:475
-msgid "Install default firmware..."
-msgstr "安装默认固件..."
-
-#: Cura/gui/mainWindow.py:478
-msgid "Install custom firmware..."
-msgstr "安装自定义固件..."
-
-#: Cura/gui/mainWindow.py:482
-msgid "Select profile file to load"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:494
-msgid "Select gcode file to load profile from"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:509
-msgid ""
-"No profile found in GCode file.\n"
-"This feature only works with GCode files made by Cura 12.07 or newer."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:509
-msgid "Profile load error"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:513
-msgid "Select profile file to save"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:523
-msgid ""
-"This will reset all profile settings to defaults.\n"
-"Unless you have saved your current profile, all settings will be lost!\n"
-"Do you really want to reset?"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:523
-msgid "Profile reset"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:543
-msgid ""
-"Warning: Installing a custom firmware does not guarantee that you machine "
-"will function correctly, and could damage your machine."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587
-msgid "Open firmware to upload"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:616
-msgid "You are running the latest version of Cura!"
-msgstr "你正在运行最新版本的的Cura!"
-
-#: Cura/gui/mainWindow.py:616
-msgid "Awesome!"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:661
-msgid "Basic"
-msgstr "基本"
-
-#: Cura/gui/mainWindow.py:665
-msgid "Advanced"
-msgstr "高级"
-
-#: Cura/gui/mainWindow.py:671
-msgid "Plugins"
-msgstr "插件"
-
-#: Cura/gui/pluginPanel.py:31
-msgid "Plugins:"
-msgstr "插件:"
-
-#: Cura/gui/pluginPanel.py:35
-msgid "Open plugin location"
-msgstr "打开本地插件"
-
-#: Cura/gui/pluginPanel.py:36
-msgid "Enabled plugins"
-msgstr "开启插件"
-
-#: Cura/gui/pluginPanel.py:159
-msgid "You need to select a plugin before you can add anything."
-msgstr "在你添加其他之前你需要选择一个插件"
-
-#: Cura/gui/pluginPanel.py:159
-msgid "Error: no plugin selected"
-msgstr "错误：没有选中吃插件"
-
-#: Cura/gui/preferencesDialog.py:14
-msgid "Preferences"
-msgstr "偏好配置......\tCTRL+,"
-
-#: Cura/gui/preferencesDialog.py:28
-msgid "Print window"
-msgstr "打印窗口"
-
-#: Cura/gui/preferencesDialog.py:31
-msgid "Colours"
-msgstr "颜色"
-
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489
-msgid "Language"
-msgstr "语言"
-
-#: Cura/gui/preferencesDialog.py:40
-msgid "Filament settings"
-msgstr "材料设置"
-
-#: Cura/gui/preferencesDialog.py:50
-msgid "Cura settings"
-msgstr "Cura设置"
-
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84
-msgid "Machine settings"
-msgstr "机型设置"
-
-#: Cura/gui/preferencesDialog.py:95
-msgid "Printer head size"
-msgstr "打印头尺寸"
-
-#: Cura/gui/preferencesDialog.py:103
-#, python-format
-msgid "Extruder %d"
-msgstr "挤出机 %d"
-
-#: Cura/gui/preferencesDialog.py:107
-msgid "Communication settings"
-msgstr "通信设置"
-
-#: Cura/gui/preferencesDialog.py:119
-msgid "Ok"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:123
-msgid "Add new machine"
-msgstr "添加机型"
-
-#: Cura/gui/preferencesDialog.py:127
-msgid "Remove machine"
-msgstr "移除机型"
-
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167
-msgid "Change machine name"
-msgstr "更改机型名称"
-
-#: Cura/gui/preferencesDialog.py:153
-msgid "Cannot remove the last machine configuration in Cura"
-msgstr "Cura中不能移除最后的机型配置"
-
-#: Cura/gui/preferencesDialog.py:153
-msgid "Machine remove error"
-msgstr "机型移除错误"
-
-#: Cura/gui/preferencesDialog.py:167
-msgid "Enter the new name:"
-msgstr "输入新的名称:"
-
-#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
-#, python-format
-msgid "Printing on %s"
-msgstr "%s 正在打印"
-
-#: Cura/gui/printWindow.py:324
-msgid ""
-"Your computer is running on battery power.\n"
-"Connect your computer to AC power or your print might not finish."
-msgstr ""
-"你的电脑正在使用电池\n"
-"连接电源,否则可能你的打印无法完成"
-
-#: Cura/gui/printWindow.py:334
-msgid ""
-"InfoLine from printer connection\n"
-"InfoLine from dialog\n"
-"Extra line\n"
-"More lines for layout\n"
-"More lines for layout\n"
-"More lines for layout"
-msgstr ""
-
-#: Cura/gui/printWindow.py:336
-msgid "Connect"
-msgstr "连接"
-
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
-msgid "Print"
-msgstr "打印"
-
-#: Cura/gui/printWindow.py:339
-msgid "Pause"
-msgstr "暂停"
-
-#: Cura/gui/printWindow.py:340
-msgid "Cancel print"
-msgstr "取消打印"
-
-#: Cura/gui/printWindow.py:341
-msgid "Error log"
-msgstr "取消打印"
-
-#: Cura/gui/sceneView.py:64
-msgid "Load"
-msgstr ""
-
-#: Cura/gui/sceneView.py:69
-msgid "Rotate"
-msgstr ""
-
-#: Cura/gui/sceneView.py:70
-msgid "Scale"
-msgstr ""
-
-#: Cura/gui/sceneView.py:71
-msgid "Mirror"
-msgstr ""
-
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
-msgid "Reset"
-msgstr ""
-
-#: Cura/gui/sceneView.py:74
-msgid "Lay flat"
-msgstr ""
-
-#: Cura/gui/sceneView.py:77
-msgid "To max"
-msgstr ""
-
-#: Cura/gui/sceneView.py:79
-msgid "Mirror X"
-msgstr ""
-
-#: Cura/gui/sceneView.py:80
-msgid "Mirror Y"
-msgstr ""
-
-#: Cura/gui/sceneView.py:81
-msgid "Mirror Z"
-msgstr ""
-
-#: Cura/gui/sceneView.py:89
-msgid "Scale X"
-msgstr ""
-
-#: Cura/gui/sceneView.py:91
-msgid "Scale Y"
-msgstr ""
-
-#: Cura/gui/sceneView.py:93
-msgid "Scale Z"
-msgstr ""
-
-#: Cura/gui/sceneView.py:95
-msgid "Size X (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:97
-msgid "Size Y (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:99
-msgid "Size Z (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:101
-msgid "Uniform scale"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "View mode"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Normal"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Overhang"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Transparent"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "X-Ray"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Layers"
-msgstr ""
-
-#: Cura/gui/sceneView.py:106
-msgid "Share on YouMagine"
-msgstr ""
-
-#: Cura/gui/sceneView.py:204
-msgid "Open 3D model"
-msgstr "打开3D模型"
-
-#: Cura/gui/sceneView.py:229
-msgid "Save 3D model"
-msgstr "保存3D模型"
-
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915
-#, python-format
-msgid "Print with %s"
-msgstr ""
-
-#: Cura/gui/sceneView.py:280
-msgid "Slice engine log..."
-msgstr ""
-
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918
-msgid "Save toolpath"
-msgstr ""
-
-#: Cura/gui/sceneView.py:352
-msgid "The slicing engine reported the following"
-msgstr ""
-
-#: Cura/gui/sceneView.py:352
-msgid "Engine log..."
-msgstr "引擎记录..."
-
-#: Cura/gui/sceneView.py:491
-msgid "How many copies do you want?"
-msgstr ""
-
-#: Cura/gui/sceneView.py:491
-msgid "Number of copies"
-msgstr ""
-
-#: Cura/gui/sceneView.py:491
-msgid "Multiply"
-msgstr ""
-
-#: Cura/gui/sceneView.py:781
-msgid "Center on platform"
-msgstr ""
-
-#: Cura/gui/sceneView.py:782
-msgid "Delete object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:783
-msgid "Multiply object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:784
-msgid "Split object into parts"
-msgstr ""
-
-#: Cura/gui/sceneView.py:786
-msgid "Dual extrusion merge"
-msgstr ""
-
-#: Cura/gui/sceneView.py:788
-msgid "Delete all objects"
-msgstr ""
-
-#: Cura/gui/sceneView.py:789
-msgid "Reload all objects"
-msgstr ""
-
-#: Cura/gui/sceneView.py:912
-msgid "Toolpath to SD"
-msgstr ""
-
-#: Cura/gui/sceneView.py:1206
-msgid "Overhang view not working due to lack of OpenGL shaders support."
-msgstr ""
-
-#: Cura/gui/simpleMode.py:19
-msgid "High quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:20
-msgid "Normal quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:21
-msgid "Fast low quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:22
-msgid "Thin walled cup or vase"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:32
-msgid "Print support structure"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:37
-msgid "Select a quickprint profile:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:47
-msgid "Material:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:51
-msgid "Diameter:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:57
-msgid "Other:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:85
-msgid "Exterior Only"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:28
-msgid "Height (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:32
-msgid "Base (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:36
-msgid "Width (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:40
-msgid "Depth (mm)"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:42
-msgid "Edit"
-msgstr "编辑"
-
-#: Cura/gui/tools/projector.py:43
-msgid "Rectangle"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:44
-msgid "Circle"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:45
-msgid "Draw curves"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:78
-msgid "Checking token"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:82
-msgid "Failed to contact YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
-msgid "YouMagine error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "Cura is now authorized to share on YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "YouMagine."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:112
-msgid "Creating new design on YouMagine..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:116
-msgid "Failed to create a design, nothing uploaded!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:120
-#, python-format
-msgid "Building model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:131
-#, python-format
-msgid "Uploading model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148
-#, python-format
-msgid "Failed to upload %s!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:137
-#, python-format
-msgid "Uploading file %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:145
-#, python-format
-msgid "Uploading image %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:153
-msgid "Failed to upload snapshot!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:158
-msgid "Publishing design..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:230
-msgid "Request authorization from YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:231
-msgid "Paste token here"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:237
-msgid ""
-"To share your designs on YouMagine\n"
-"you need an account on YouMagine.com\n"
-"and authorize Cura to access your account."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:239
-msgid ""
-"This will open a browser window where you can\n"
-"authorize Cura to access your YouMagine account.\n"
-"You can revoke access at any time\n"
-"from YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:274
-msgid "Design name"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:278
-msgid "Publish after upload"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:279
-msgid "Share!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:287
-msgid "Add..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:289
-msgid "Webcam..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:299
-msgid ""
-"Directly publish the design after uploading.\n"
-"Without this check the design will not be public\n"
-"until you publish it yourself on YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:305
-msgid "Design name:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:307
-msgid "Description:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:309
-msgid "Category:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:311
-msgid "License:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:314
-msgid "Images:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:317
-msgid "Related design files:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:340
-msgid "The name cannot be empty"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
-msgid "New design error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:344
-msgid "The description cannot be empty"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "No webcam found on your system"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "Webcam error"
-msgstr ""
-
-#: Cura/gui/util/engineResultView.py:168
-#, python-format
-msgid "Loading toolpath for visualization (%d%%)"
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:242
-msgid "An error has occurred during the 3D view drawing."
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:250
-msgid "3D window error"
-msgstr ""
-
-#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210
-#: Cura/util/profile.py:212
-msgid "Quality"
-msgstr "打印质量"
-
-#: Cura/util/profile.py:178
-msgid "Layer height (mm)"
-msgstr "层厚(mm)"
-
-#: Cura/util/profile.py:178
-msgid ""
-"Layer height in millimeters.\n"
-"This is the most important setting to determine the quality of your print. "
-"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
-"0.25mm with an Ultimaker for very fast prints at low quality."
-msgstr ""
-"每层的厚度\n"
-"这是最影响打印质量的设置\n"
-"普通质量可设置为0.2mm，高质量设为0.1mm。\n"
-"降低打印质量可以提升打印速度"
-
-#: Cura/util/profile.py:179
-msgid "Shell thickness (mm)"
-msgstr "壁厚(mm)"
-
-#: Cura/util/profile.py:179
-msgid ""
-"Thickness of the outside shell in the horizontal direction.\n"
-"This is used in combination with the nozzle size to define the number\n"
-"of perimeter lines and the thickness of those perimeter lines."
-msgstr ""
-"水平方向的边缘厚度\n"
-"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"
-
-#: Cura/util/profile.py:180
-msgid "Enable retraction"
-msgstr "开启回退"
-
-#: Cura/util/profile.py:180
-msgid ""
-"Retract the filament when the nozzle is moving over a none-printed area. "
-"Details about the retraction can be configured in the advanced tab."
-msgstr ""
-"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"
-"在高级设置面板中有更多相关设置"
-
-#: Cura/util/profile.py:181 Cura/util/profile.py:182
-msgid "Fill"
-msgstr "填充"
-
-#: Cura/util/profile.py:181
-msgid "Bottom/Top thickness (mm)"
-msgstr "底层/顶层厚度(mm)"
-
-#: Cura/util/profile.py:181
-msgid ""
-"This controls the thickness of the bottom and top layers, the amount of "
-"solid layers put down is calculated by the layer thickness and this value.\n"
-"Having this value a multiple of the layer thickness makes sense. And keep it "
-"near your wall thickness to make an evenly strong part."
-msgstr ""
-"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"
-"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"
-
-#: Cura/util/profile.py:182
-msgid "Fill Density (%)"
-msgstr "填充密度(%)"
-
-#: Cura/util/profile.py:182
-msgid ""
-"This controls how densely filled the insides of your print will be. For a "
-"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
-"enough.\n"
-"This won't affect the outside of the print and only adjusts how strong the "
-"part becomes."
-msgstr ""
-"控制填充密度\n"
-"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"
-"这个参数不会影响物体的外观，它一般用来调整物体的强度"
-
-#: Cura/util/profile.py:183
-msgid ""
-"The nozzle size is very important, this is used to calculate the line width "
-"of the infill, and used to calculate the amount of outside wall lines and "
-"thickness for the wall thickness you entered in the print settings."
-msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
-
-#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186
-#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189
-msgid "Speed and Temperature"
-msgstr "速度和温度"
-
-#: Cura/util/profile.py:184
-msgid "Print speed (mm/s)"
-msgstr "打印速度(mm/s)"
-
-#: Cura/util/profile.py:184
-msgid ""
-"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
-"s, but for good quality prints you want to print slower. Printing speed "
-"depends on a lot of factors. So you will be experimenting with optimal "
-"settings for this."
-msgstr ""
-"打印速度\n"
-"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"
-"80mm/s以下\n"
-"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"
-
-#: Cura/util/profile.py:185
-msgid "Printing temperature (C)"
-msgstr "打印温度(C)"
-
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
-#: Cura/util/profile.py:188
-msgid ""
-"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
-"For PLA a value of 210C is usually used.\n"
-"For ABS a value of 230C or higher is required."
-msgstr ""
-"打印时的喷头温度\n"
-"PLA通常设置为210C\n"
-"ABS通常设置为230C"
-
-#: Cura/util/profile.py:186
-msgid "2nd nozzle temperature (C)"
-msgstr "第二打印头温度 (C)"
-
-#: Cura/util/profile.py:187
-msgid "3th nozzle temperature (C)"
-msgstr "第三打印头温度 (C)"
-
-#: Cura/util/profile.py:188
-msgid "4th nozzle temperature (C)"
-msgstr "第四打印头温度 (C)"
-
-#: Cura/util/profile.py:189
-msgid "Bed temperature (C)"
-msgstr "热床温度"
-
-#: Cura/util/profile.py:189
-msgid ""
-"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
-msgstr "打印时热床的温度,自己预加热请设置成0"
-
-#: Cura/util/profile.py:190 Cura/util/profile.py:191
-msgid "None"
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid "Touching buildplate"
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid "Everywhere"
-msgstr ""
-
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234
-#: Cura/util/profile.py:235 Cura/util/profile.py:236
-msgid "Support"
-msgstr "支撑"
-
-#: Cura/util/profile.py:190
-msgid "Support type"
-msgstr "支撑类型"
-
-#: Cura/util/profile.py:190
-msgid ""
-"Type of support structure build.\n"
-"\"Touching buildplate\" is the most commonly used support setting.\n"
-"\n"
-"None does not do any support.\n"
-"Touching buildplate only creates support where the support structure will "
-"touch the build platform.\n"
-"Everywhere creates support even on top of parts of the model."
-msgstr ""
-"支撑结构类型。\n"
-"通常使用\"Touching buildplate\"建立支撑 \n"
-"\n"
-"选择 None 不会建立支撑\n"
-
-#: Cura/util/profile.py:191 Cura/util/profile.py:240
-msgid "Brim"
-msgstr ""
-
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245
-#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248
-#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251
-msgid "Raft"
-msgstr ""
-
-#: Cura/util/profile.py:191
-msgid "Platform adhesion type"
-msgstr "粘附平台"
-
-#: Cura/util/profile.py:191
-msgid ""
-"Different options that help in preventing corners from lifting due to "
-"warping.\n"
-"Brim adds a single layer thick flat area around your object which is easy to "
-"cut off afterwards, and it is the recommended option.\n"
-"Raft adds a thick raster below the object and a thin interface between this "
-"and your object.\n"
-"(Note that enabling the brim or raft disables the skirt)"
-msgstr ""
-"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
-"Raft会打印模型前打印一个网状底座\n"
-
-#: Cura/util/profile.py:192
-msgid "Both"
-msgstr ""
-
-#: Cura/util/profile.py:192
-msgid "First extruder"
-msgstr ""
-
-#: Cura/util/profile.py:192
-msgid "Second extruder"
-msgstr ""
-
-#: Cura/util/profile.py:192
-msgid "Support dual extrusion"
-msgstr "双头打印中的支撑"
-
-#: Cura/util/profile.py:192
-msgid ""
-"Which extruder to use for support material, for break-away support you can "
-"use both extruders.\n"
-"But if one of the materials is more expensive then the other you could "
-"select an extruder to use for support material. This causes more extruder "
-"switches.\n"
-"You can also use the 2nd extruder for soluble support materials."
-msgstr ""
-"哪个喷嘴用来打印支撑，对于直接剥离的，任意喷嘴都可以\n"
-"但是如果某个材料比较贵重,你可以选择另外一个用来用作支撑,这会导致更多的喷头切"
-"换\n"
-"你还可以用第二喷嘴来打印水溶性支撑\n"
-"\"Both\"为两者\n"
-"\"First extruder\"为第一个喷嘴（一般为右侧的那个）\n"
-"\"Second extruder\"为第二个喷嘴"
-
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
-msgid "Dual extrusion"
-msgstr "双喷头"
-
-#: Cura/util/profile.py:193
-msgid "Wipe&prime tower"
-msgstr "残料擦除塔"
-
-#: Cura/util/profile.py:193
-msgid ""
-"The wipe-tower is a tower printed on every layer when switching between "
-"nozzles.\n"
-"The old nozzle is wiped off on the tower before the new nozzle is used to "
-"print the 2nd color."
-msgstr ""
-"残料擦除塔是用在每层打印头切换的时候打印的\n"
-"用来在当前喷嘴打印前擦除前一个喷嘴的料"
-
-#: Cura/util/profile.py:194
-msgid "Wipe&prime tower volume per layer (mm3)"
-msgstr "每层擦除塔体积(mm3)"
-
-#: Cura/util/profile.py:194
-msgid ""
-"The amount of material put in the wipe/prime tower.\n"
-"This is done in volume because in general you want to extrude a\n"
-"certain amount of volume to get the extruder going, independent on the layer "
-"height.\n"
-"This means that with thinner layers, your tower gets bigger."
-msgstr ""
-"用于擦除塔上的材料的数量.\n"
-"用体积,是因为一般你要挤出一定的量,\n"
-"来让挤出机继续工作,而有独立于层高\n"
-"这意味着,更薄的层,你的塔变大"
-
-#: Cura/util/profile.py:195
-msgid "Ooze shield"
-msgstr "溢出保护"
-
-#: Cura/util/profile.py:195
-msgid ""
-"The ooze shield is a 1 line thick shell around the object which stands a few "
-"mm from the object.\n"
-"This shield catches any oozing from the unused nozzle in dual-extrusion."
-msgstr ""
-"溢出保护是一条几毫米的厚壁\n"
-"这个壁在双喷头打印的时候抓去那些无用的漏液"
-
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
-#: Cura/util/profile.py:199 Cura/util/profile.py:200
-msgid "Filament"
-msgstr "打印材料"
-
-#: Cura/util/profile.py:196
-msgid "Diameter (mm)"
-msgstr "直径(mm)"
-
-#: Cura/util/profile.py:196
-msgid ""
-"Diameter of your filament, as accurately as possible.\n"
-"If you cannot measure this value you will have to calibrate it, a higher "
-"number means less extrusion, a smaller number generates more extrusion."
-msgstr ""
-"耗材的直径,请尽量精确\n"
-"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
-"更\n"
-"高的数值会有更少的料挤出"
-
-#: Cura/util/profile.py:197
-msgid "Diameter2 (mm)"
-msgstr "线材直径2 (mm)"
-
-#: Cura/util/profile.py:197
-msgid ""
-"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"2号打印头的耗材的直径,请尽量精确\n"
-"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
-"更\n"
-"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
-
-#: Cura/util/profile.py:198
-msgid "Diameter3 (mm)"
-msgstr "线材直径3 (mm)"
-
-#: Cura/util/profile.py:198
-msgid ""
-"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"3号打印头的耗材的直径,请尽量精确\n"
-"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
-"更\n"
-"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
-
-#: Cura/util/profile.py:199
-msgid "Diameter4 (mm)"
-msgstr "线材直径4 (mm)"
-
-#: Cura/util/profile.py:199
-msgid ""
-"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-"4号打印头的耗材的直径,请尽量精确\n"
-"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
-"更\n"
-"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
-
-#: Cura/util/profile.py:200
-msgid "Flow (%)"
-msgstr "流量(%)"
-
-#: Cura/util/profile.py:200
-msgid ""
-"Flow compensation, the amount of material extruded is multiplied by this "
-"value"
-msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"
-
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206
-#: Cura/util/profile.py:207
-msgid "Retraction"
-msgstr "回退"
-
-#: Cura/util/profile.py:201
-msgid "Speed (mm/s)"
-msgstr "回退速度(mm/s)"
-
-#: Cura/util/profile.py:201
-msgid ""
-"Speed at which the filament is retracted, a higher retraction speed works "
-"better. But a very high retraction speed can lead to filament grinding."
-msgstr ""
-"回退丝时的速度\n"
-"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
-
-#: Cura/util/profile.py:202
-msgid "Distance (mm)"
-msgstr "回退长度(mm)"
-
-#: Cura/util/profile.py:202
-msgid ""
-"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
-"seems to generate good results."
-msgstr ""
-"丝回退的长度\n"
-"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"
-
-#: Cura/util/profile.py:203
-msgid "Dual extrusion switch amount (mm)"
-msgstr "双喷头切换回退量 (mm)"
-
-#: Cura/util/profile.py:203
-msgid ""
-"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
-"no retraction at all. A value of 16.0mm seems to generate good results."
-msgstr "回抽的数量,0为不使用回抽,一般2mm会有比较好的效果"
-
-#: Cura/util/profile.py:204
-msgid "Minimum travel (mm)"
-msgstr "最小移动距离(mm)"
-
-#: Cura/util/profile.py:204
-msgid ""
-"Minimum amount of travel needed for a retraction to happen at all. To make "
-"sure you do not get a lot of retractions in a small area."
-msgstr "回抽使用的最小的移动间隔,用来防止在一个很小的范围内不停的使用回抽"
-
-#: Cura/util/profile.py:205
-msgid "Enable combing"
-msgstr "启用梳理"
-
-#: Cura/util/profile.py:205
-msgid ""
-"Combing is the act of avoiding holes in the print for the head to travel "
-"over. If combing is disabled the printer head moves straight from the start "
-"point to the end point and it will always retract."
-msgstr ""
-"梳理功能可以避免喷头移动后产生的孔\n"
-"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"
-
-#: Cura/util/profile.py:206
-msgid "Minimal extrusion before retracting (mm)"
-msgstr "回退前最小挤出量(mm)"
-
-#: Cura/util/profile.py:206
-msgid ""
-"The minimal amount of extrusion that needs to be done before retracting "
-"again if a retraction needs to happen before this minimal is reached the "
-"retraction is ignored.\n"
-"This avoids retracting a lot on the same piece of filament which flattens "
-"the filament and causes grinding issues."
-msgstr ""
-"最小挤出量一般使用在回抽需要反复发生的时候\n"
-"它可以避免那些频繁回抽导致的耗材挖坑现象"
-
-#: Cura/util/profile.py:207
-msgid "Z hop when retracting (mm)"
-msgstr "回退时Z轴抬起(mm)"
-
-#: Cura/util/profile.py:207
-msgid ""
-"When a retraction is done, the head is lifted by this amount to travel over "
-"the print. A value of 0.075 works well. This feature has a lot of positive "
-"effect on delta towers."
-msgstr ""
-"当回退完成,移动的时候打印头会升起一定高度,0.075工作起来比较不错.此功能对打"
-"印\n"
-"塔类物品有宜."
-
-#: Cura/util/profile.py:208
-msgid "Initial layer thickness (mm)"
-msgstr "初始层厚 (mm)"
-
-#: Cura/util/profile.py:208
-msgid ""
-"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
-"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
-"the other layers."
-msgstr ""
-"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
-"始层厚度"
-
-#: Cura/util/profile.py:209
-msgid "Initial layer line width (%)"
-msgstr "初始层线宽(%)"
-
-#: Cura/util/profile.py:209
-msgid ""
-"Extra width factor for the extrusion on the first layer, on some printers "
-"it's good to have wider extrusion on the first layer to get better bed "
-"adhesion."
-msgstr ""
-"下沉模型\n"
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
-"数，切除一部分模型再打印"
-
-#: Cura/util/profile.py:210
-msgid "Cut off object bottom (mm)"
-msgstr "底层切除(mm)"
-
-#: Cura/util/profile.py:210
-msgid ""
-"Sinks the object into the platform, this can be used for objects that do not "
-"have a flat bottom and thus create a too small first layer."
-msgstr ""
-"下沉模型\n"
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
-"数，切除一部分模型再打印"
-
-#: Cura/util/profile.py:212
-msgid "Dual extrusion overlap (mm)"
-msgstr "两次挤出重叠(mm)"
-
-#: Cura/util/profile.py:212
-msgid ""
-"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
-"bonds the different colors together."
-msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
-
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
-#: Cura/util/profile.py:216 Cura/util/profile.py:217
-msgid "Speed"
-msgstr "速度"
-
-#: Cura/util/profile.py:213
-msgid "Travel speed (mm/s)"
-msgstr "移动速度 (mm/s)"
-
-#: Cura/util/profile.py:213
-msgid ""
-"Speed at which travel moves are done, a well built Ultimaker can reach "
-"speeds of 250mm/s. But some machines might miss steps then."
-msgstr ""
-"移动喷头时的速度\n"
-"此移动速度指非打印状态下的移动速度\n"
-"建议不要超过150mm/s,否则可能造成电机丢步"
-
-#: Cura/util/profile.py:214
-msgid "Bottom layer speed (mm/s)"
-msgstr "底层速度 (mm/s)"
-
-#: Cura/util/profile.py:214
-msgid ""
-"Print speed for the bottom layer, you want to print the first layer slower "
-"so it sticks better to the printer bed."
-msgstr ""
-"打印底层的速度\n"
-"这个值通常会设置的很低，这样能使底层和平台粘附的更好"
-
-#: Cura/util/profile.py:215
-msgid "Infill speed (mm/s)"
-msgstr "填充速度 (mm/s)"
-
-#: Cura/util/profile.py:215
-msgid ""
-"Speed at which infill parts are printed. If set to 0 then the print speed is "
-"used for the infill. Printing the infill faster can greatly reduce printing "
-"time, but this can negatively affect print quality."
-msgstr ""
-"打印内部填充时的速度\n"
-"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"
-"可能会对打印质量照成一定消极影响"
-
-#: Cura/util/profile.py:216
-msgid "Outer shell speed (mm/s)"
-msgstr "外壳速度 (mm/s)"
-
-#: Cura/util/profile.py:216
-msgid ""
-"Speed at which outer shell is printed. If set to 0 then the print speed is "
-"used. Printing the outer shell at a lower speed improves the final skin "
-"quality. However, having a large difference between the inner shell speed "
-"and the outer shell speed will effect quality in a negative way."
-msgstr ""
-"打印机外壳时的速度\n"
-"当设置为0时，会使用打印速度作为外壳速度\n"
-"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"
-"大，可能会对打印质量有一些消极影响"
-
-#: Cura/util/profile.py:217
-msgid "Inner shell speed (mm/s)"
-msgstr "内壁速度 (mm/s)"
-
-#: Cura/util/profile.py:217
-msgid ""
-"Speed at which inner shells are printed. If set to 0 then the print speed is "
-"used. Printing the inner shell faster then the outer shell will reduce "
-"printing time. It is good to set this somewhere in between the outer shell "
-"speed and the infill/printing speed."
-msgstr ""
-"打印内壁时的速度\n"
-"当设置为0时，会使用打印速度作为内壁速度\n"
-"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"
-"充速度之间的关系"
-
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227
-#: Cura/util/profile.py:228
-msgid "Cool"
-msgstr "冷却"
-
-#: Cura/util/profile.py:218
-msgid "Minimal layer time (sec)"
-msgstr "每层最小打印时间(sec)"
-
-#: Cura/util/profile.py:218
-msgid ""
-"Minimum time spent in a layer, gives the layer time to cool down before the "
-"next layer is put on top. If the layer will be placed down too fast the "
-"printer will slow down to make sure it has spent at least this amount of "
-"seconds printing this layer."
-msgstr ""
-"打印每层至少要耗费的时间\n"
-"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"
-"适当降低速度，以保证有这个设定时间"
-
-#: Cura/util/profile.py:219
-msgid "Enable cooling fan"
-msgstr "开启风扇冷却"
-
-#: Cura/util/profile.py:219
-msgid ""
-"Enable the cooling fan during the print. The extra cooling from the cooling "
-"fan is essential during faster prints."
-msgstr ""
-"在打印期间开启风扇冷却\n"
-"在快速打印时开启风扇冷却是很有必要的"
-
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
-msgid "Skirt"
-msgstr "裙边"
-
-#: Cura/util/profile.py:221
-msgid "Line count"
-msgstr "线数"
-
-#: Cura/util/profile.py:221
-msgid ""
-"The skirt is a line drawn around the object at the first layer. This helps "
-"to prime your extruder, and to see if the object fits on your platform.\n"
-"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
-"priming your extruder better for small objects."
-msgstr ""
-"裙边是画在模型第一层外的一条线，可以帮助你准备好你的挤出机，同时可以看到模型"
-"是否适合于平台。\n"
-"设置为0将关掉裙边功能。多条群边可以帮助你的挤出机适用于打印小一点的模型。"
-
-#: Cura/util/profile.py:222
-msgid "Start distance (mm)"
-msgstr "开始距离(mm)"
-
-#: Cura/util/profile.py:222
-msgid ""
-"The distance between the skirt and the first layer.\n"
-"This is the minimal distance, multiple skirt lines will be put outwards from "
-"this distance."
-msgstr ""
-"群边与打印第一层的距离。\n"
-"这个是最小的距离。多条群边线将从这个距离向外扩。"
-
-#: Cura/util/profile.py:223
-msgid "Minimal length (mm)"
-msgstr "最小长度(mm)"
-
-#: Cura/util/profile.py:223
-msgid ""
-"The minimal length of the skirt, if this minimal length is not reached it "
-"will add more skirt lines to reach this minimal lenght.\n"
-"Note: If the line count is set to 0 this is ignored."
-msgstr ""
-"群边的最小长度，如果最小长度没有达到这个值，将自动添加更多群边线来达到这个最"
-"小长度。\n"
-"注意：如果线的数量被设置为0，这栏将被忽略。"
-
-#: Cura/util/profile.py:224
-msgid "Fan full on at height (mm)"
-msgstr "风扇全速开启高度(mm)"
-
-#: Cura/util/profile.py:224
-msgid ""
-"The height at which the fan is turned on completely. For the layers below "
-"this the fan speed is scaled linearly with the fan off at layer 0."
-msgstr "风扇全速开启的高度,在此之下速度将会被从0开始线性分配"
-
-#: Cura/util/profile.py:225
-msgid "Fan speed min (%)"
-msgstr "风扇最小速度(%)"
-
-#: Cura/util/profile.py:225
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Minimal fan speed is used if the layer is not slowed down due to cooling."
-msgstr ""
-"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"
-"高\n"
-"速中调节,这个速度将在不需要冷却的层中使用."
-
-#: Cura/util/profile.py:226
-msgid "Fan speed max (%)"
-msgstr "风扇最大速度(%)"
-
-#: Cura/util/profile.py:226
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Maximal fan speed is used if the layer is slowed down due to cooling by more "
-"than 200%."
-msgstr ""
-"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"
-"高\n"
-"速中调节,这个速度将在那些需要200%冷却的层中使用."
-
-#: Cura/util/profile.py:227
-msgid "Minimum speed (mm/s)"
-msgstr "最小速度(mm/s)"
-
-#: Cura/util/profile.py:227
-msgid ""
-"The minimal layer time can cause the print to slow down so much it starts to "
-"ooze. The minimal feedrate protects against this. Even if a print gets "
-"slowed down it will never be slower than this minimal speed."
-msgstr ""
-"最少层时间可能会到时机器打印速度下降,从而导致漏液.这个最小送料速率是用来阻"
-"止\n"
-"此类情况的.即便机器速度下降,也不会低于这个速度."
-
-#: Cura/util/profile.py:228
-msgid "Cool head lift"
-msgstr "喷头移开冷却"
-
-#: Cura/util/profile.py:228
-msgid ""
-"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
-"the extra time so the minimal layer time is always hit."
-msgstr "当最小打印时间被激活,需要冷却的时候,升起打印头,然后等待到冷却时间达到"
-
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231
-msgid "Infill"
-msgstr "填充"
-
-#: Cura/util/profile.py:229
-msgid "Solid infill top"
-msgstr "填充顶层"
-
-#: Cura/util/profile.py:229
-msgid ""
-"Create a solid top surface, if set to false the top is filled with the fill "
-"percentage. Useful for cups/vases."
-msgstr ""
-"打印一个坚实的顶部表面,如果不勾选,将会以设置的填充比例打印.对于打印花瓶等比"
-"较\n"
-"有用"
-
-#: Cura/util/profile.py:230
-msgid "Solid infill bottom"
-msgstr "填充底层"
-
-#: Cura/util/profile.py:230
-msgid ""
-"Create a solid bottom surface, if set to false the bottom is filled with the "
-"fill percentage. Useful for buildings."
-msgstr ""
-"打印一个坚实的底部,如果关闭则会根据填充比例填充,当打印建筑类的时候比较有用"
-
-#: Cura/util/profile.py:231
-msgid "Infill overlap (%)"
-msgstr "填充重合(%)"
-
-#: Cura/util/profile.py:231
-msgid ""
-"Amount of overlap between the infill and the walls. There is a slight "
-"overlap with the walls and the infill so the walls connect firmly to the "
-"infill."
-msgstr ""
-"内部填充和外表面的重合交叉程度,填充和外表面交叉有助于提升外表面和填充的连接坚"
-"固性"
-
-#: Cura/util/profile.py:232
-msgid "Structure type"
-msgstr "支撑类型"
-
-#: Cura/util/profile.py:232
-msgid ""
-"The type of support structure.\n"
-"Grid is very strong and can come off in 1 piece, however, sometimes it is "
-"too strong.\n"
-"Lines are single walled lines that break off one at a time. Which is more "
-"work to remove, but as it is less strong it does work better on tricky "
-"prints."
-msgstr ""
-"支撑的结构类型\n"
-"Grid是一个比较结实的结构,能够一次性剥离,但是有时候太结实了.Line是线条装填充"
-
-#: Cura/util/profile.py:233
-msgid "Overhang angle for support (deg)"
-msgstr "支撑临界角(deg)"
-
-#: Cura/util/profile.py:233
-msgid ""
-"The minimal angle that overhangs need to have to get support. With 90 degree "
-"being horizontal and 0 degree being vertical."
-msgstr "在模型上判断需要生成支撑的最小角度,0度是水平的,90度是垂直的"
-
-#: Cura/util/profile.py:234
-msgid "Fill amount (%)"
-msgstr "支撑数量"
-
-#: Cura/util/profile.py:234
-#, python-format
-msgid ""
-"Amount of infill structure in the support material, less material gives "
-"weaker support which is easier to remove. 15% seems to be a good average."
-msgstr ""
-"支撑材料的填充密度,较少的材料可以让支撑比较容易剥离.15%是个比较合适的值."
-
-#: Cura/util/profile.py:235
-msgid "Distance X/Y (mm)"
-msgstr "X/Y轴距离"
-
-#: Cura/util/profile.py:235
-msgid ""
-"Distance of the support material from the print, in the X/Y directions.\n"
-"0.7mm gives a nice distance from the print so the support does not stick to "
-"the print."
-msgstr ""
-"支撑材料在X/Y方向和物体的距离\n"
-"0.7mm 是一个比较合适的支撑距离,这样支撑和打印物体不会黏在一起"
-
-#: Cura/util/profile.py:236
-msgid "Distance Z (mm)"
-msgstr "Z轴距离"
-
-#: Cura/util/profile.py:236
-msgid ""
-"Distance from the top/bottom of the support to the print. A small gap here "
-"makes it easier to remove the support but makes the print a bit uglier.\n"
-"0.15mm gives a good seperation of the support material."
-msgstr ""
-"支撑在Z方向和打印物体的底部和顶部距离,一个小的间距可以让支撑容易被取掉，但"
-"是\n"
-"会导致打印效果变差\n"
-"0.15mm是一个比较好的设置"
-
-#: Cura/util/profile.py:237 Cura/util/profile.py:238
-msgid "Black Magic"
-msgstr "黑魔法"
-
-#: Cura/util/profile.py:237
-msgid "Spiralize the outer contour"
-msgstr "外部轮廓启用Spiralize"
-
-#: Cura/util/profile.py:237
-msgid ""
-"Spiralize is smoothing out the Z move of the outer edge. This will create a "
-"steady Z increase over the whole print. This feature turns a solid object "
-"into a single walled print with a solid bottom.\n"
-"This feature used to be called Joris in older versions."
-msgstr ""
-"Spiralize是一个在Z方向帮助打印光滑的功能,它在整个打印过程中会稳固增加Z,这个"
-"功\n"
-"能可以使得打印物体像有结实底部的单面墙一样.\n"
-"这个功能在旧版本里叫Joris."
-
-#: Cura/util/profile.py:238
-msgid "Only follow mesh surface"
-msgstr "只打印模型表面"
-
-#: Cura/util/profile.py:238
-msgid ""
-"Only follow the mesh surfaces of the 3D model, do not do anything else. No "
-"infill, no top/bottom, nothing."
-msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"
-
-#: Cura/util/profile.py:240
-msgid "Brim line amount"
-msgstr "边沿走线圈数"
-
-#: Cura/util/profile.py:240
-msgid ""
-"The amount of lines used for a brim, more lines means a larger brim which "
-"sticks better, but this also makes your effective print area smaller."
-msgstr ""
-"使用Brim的数量,越大的数字能使你打印的物体更容易粘在平台上,但同时会缩小可用"
-"打\n"
-"印区域"
-
-#: Cura/util/profile.py:241
-msgid "Extra margin (mm)"
-msgstr "额外边缘(mm)"
-
-#: Cura/util/profile.py:241
-msgid ""
-"If the raft is enabled, this is the extra raft area around the object which "
-"is also rafted. Increasing this margin will create a stronger raft while "
-"using more material and leaving less area for your print."
-msgstr ""
-"如果启用底座,这个是额外的底座区域,增大这个数字可以使得底座更有力,但会缩小你"
-"的\n"
-"打印区域."
-
-#: Cura/util/profile.py:242
-msgid "Line spacing (mm)"
-msgstr "走线间隔(mm)"
-
-#: Cura/util/profile.py:242
-msgid ""
-"When you are using the raft this is the distance between the centerlines of "
-"the raft line."
-msgstr "当使用底座的时候,这个数字用来设置距离中心线的距离"
-
-#: Cura/util/profile.py:243
-msgid "Base thickness (mm)"
-msgstr "基底层厚度(mm)"
-
-#: Cura/util/profile.py:243
-msgid ""
-"When you are using the raft this is the thickness of the base layer which is "
-"put down."
-msgstr "底座最底层的厚度"
-
-#: Cura/util/profile.py:244
-msgid "Base line width (mm)"
-msgstr "基底层走线宽度(mm)"
-
-#: Cura/util/profile.py:244
-msgid ""
-"When you are using the raft this is the width of the base layer lines which "
-"are put down."
-msgstr "底层线条的宽度"
-
-#: Cura/util/profile.py:245
-msgid "Interface thickness (mm)"
-msgstr "接触层厚度(mm)"
-
-#: Cura/util/profile.py:245
-msgid ""
-"When you are using the raft this is the thickness of the interface layer "
-"which is put down."
-msgstr "底座上层的厚度"
-
-#: Cura/util/profile.py:246
-msgid "Interface line width (mm)"
-msgstr "接触层走线宽度 (mm)"
-
-#: Cura/util/profile.py:246
-msgid ""
-"When you are using the raft this is the width of the interface layer lines "
-"which are put down."
-msgstr "底座接口层线条的宽度"
-
-#: Cura/util/profile.py:247
-msgid "Airgap"
-msgstr "悬空间隙"
-
-#: Cura/util/profile.py:247
-msgid "Gap between the last layer of the raft the whole print."
-msgstr "底座和表层的间隔,在使用PLA的时候,0.2mm左右的间隔可以你很好的剥离底座"
-
-#: Cura/util/profile.py:248
-msgid "First Layer Airgap"
-msgstr "第一层悬空间隙"
-
-#: Cura/util/profile.py:248
-msgid ""
-"Gap between the last layer of the raft and the first printing layer. A small "
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "
-"value is added on top of the 'Airgap' setting."
-msgstr ""
-"在基底和模型之间的间隙距离\n"
-"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"
-
-#: Cura/util/profile.py:249
-msgid "Surface layers"
-msgstr "表层"
-
-#: Cura/util/profile.py:249
-msgid ""
-"Amount of surface layers put on top of the raft, these are fully filled "
-"layers on which the model is printed."
-msgstr "在底座上打印表层的数量,这些层是完全填充的"
-
-#: Cura/util/profile.py:250
-msgid "Surface layer thickness (mm)"
-msgstr "初始层厚 (mm)"
-
-#: Cura/util/profile.py:250
-msgid "Thickness of each surface layer."
-msgstr "表面层的厚度"
-
-#: Cura/util/profile.py:251
-msgid "Surface layer line width (mm)"
-msgstr "接触层走线宽度 (mm)"
-
-#: Cura/util/profile.py:251
-msgid "Width of the lines for each surface layer."
-msgstr "表层线宽"
-
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254
-#: Cura/util/profile.py:255
-msgid "Fix horrible"
-msgstr "缺陷修复"
-
-#: Cura/util/profile.py:252
-msgid "Combine everything (Type-A)"
-msgstr "闭合面片(Type-A)"
-
-#: Cura/util/profile.py:252 Cura/util/profile.py:253
-msgid ""
-"This expert option adds all parts of the model together. The result is "
-"usually that internal cavities disappear. Depending on the model this can be "
-"intended or not. Enabling this option is at your own risk. Type-A is "
-"dependent on the model normals and tries to keep some internal holes intact. "
-"Type-B ignores all internal holes and only keeps the outside shape per layer."
-msgstr ""
-"这个专家选项会组合所有的打印物体到一起.结果一般是内部空隙消失了,取决于物体"
-"能\n"
-"否这样做.A类型是比较正常的,会尽量保持所有的内孔不变.B类型会忽略所有的内部"
-"孔,\n"
-"只保持外部形状."
-
-#: Cura/util/profile.py:253
-msgid "Combine everything (Type-B)"
-msgstr "闭合面片(Type-B)"
-
-#: Cura/util/profile.py:254
-msgid "Keep open faces"
-msgstr "保持开放面"
-
-#: Cura/util/profile.py:254
-msgid ""
-"This expert option keeps all the open bits of the model intact. Normally "
-"Cura tries to stitch up small holes and remove everything with big holes, "
-"but this option keeps bits that are not properly part of anything and just "
-"goes with whatever is left. This option is usually not what you want, but it "
-"might enable you to slice models otherwise failing to produce proper paths.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-"这个选项会保持所有的开放表面不动.正常情况下Cura会尝试着填补所有的洞,但是这"
-"个\n"
-"选项会打开会则会不理会这些洞.这个选项一般是你所不需要的,除非在出现切片失败"
-"的\n"
-"情况下,你可能需要打开它.\n"
-
-#: Cura/util/profile.py:255
-msgid "Extensive stitching"
-msgstr "拼接"
-
-#: Cura/util/profile.py:255
-msgid ""
-"Extensive stitching tries to fix up open holes in the model by closing the "
-"hole with touching polygons. This algorthm is quite expensive and could "
-"introduce a lot of processing time.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-"拼接选项是在切片时尝试恢复那些开放的面,变成闭合的多边形.但是这个算法非常消"
-"耗\n"
-"资源,甚至使得处理时间大大增加\n"
-"(和所有的修正错误选项一样,实验性质,风险自担)"
-
-#: Cura/util/profile.py:481
-msgid "Save profile on slice"
-msgstr "保存切片配置"
-
-#: Cura/util/profile.py:481
-msgid ""
-"When slicing save the profile as [stl_file]_profile.ini next to the model."
-msgstr "在切片时保存[stl_file]_profile.ini可以用于下个模型"
-
-#: Cura/util/profile.py:482
-msgid "Cost (price/kg)"
-msgstr "成本 (price/kg)"
-
-#: Cura/util/profile.py:482
-msgid "Cost of your filament per kg, to estimate the cost of the final print."
-msgstr "每公斤的成本花费,用来计算打印物体的成本"
-
-#: Cura/util/profile.py:483
-msgid "Cost (price/m)"
-msgstr "成本 (price/m)"
-
-#: Cura/util/profile.py:483
-msgid ""
-"Cost of your filament per meter, to estimate the cost of the final print."
-msgstr "每公斤的成本花费,用来计算打印物体的成本"
-
-#: Cura/util/profile.py:484
-msgid "Auto detect SD card drive"
-msgstr "自动检测SD卡"
-
-#: Cura/util/profile.py:484
-msgid ""
-"Auto detect the SD card. You can disable this because on some systems "
-"external hard-drives or USB sticks are detected as SD card."
-msgstr "自动检测SD卡.你可以在当外接硬盘或者U盘被认为是SD的时候关掉这个选项"
-
-#: Cura/util/profile.py:485
-msgid "Check for updates"
-msgstr "检查更新"
-
-#: Cura/util/profile.py:485
-msgid "Check for newer versions of Cura on startup"
-msgstr "Cura启动时检查更新"
-
-#: Cura/util/profile.py:486
-msgid "Send usage statistics"
-msgstr "提交统计信息"
-
-#: Cura/util/profile.py:486
-msgid "Submit anonymous usage information to improve future versions of Cura"
-msgstr "提交匿名的使用信息,用于改进下版本的Cura"
-
-#: Cura/util/profile.py:488
-msgid "Density (kg/m3)"
-msgstr "填充密度 (%)"
-
-#: Cura/util/profile.py:488
-msgid ""
-"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
-"This value is used to estimate the weight if the filament used for the print."
-msgstr ""
-"每立方米的耗材重量,PLA大概1240左右,ABS是1040,这个值用来估算打印物体的重量"
-
-#: Cura/util/profile.py:489
-msgid ""
-"Change the language in which Cura runs. Switching language requires a "
-"restart of Cura"
-msgstr "选择语言,需要重启Cura"
-
-#: Cura/util/profile.py:492
-msgid "Model colour"
-msgstr "模型颜色"
-
-#: Cura/util/profile.py:492
-msgid "Display color for first extruder"
-msgstr "第一个喷嘴的颜色"
-
-#: Cura/util/profile.py:493
-msgid "Model colour (2)"
-msgstr "模型颜色(2)"
-
-#: Cura/util/profile.py:493
-msgid "Display color for second extruder"
-msgstr "第二个喷嘴的颜色"
-
-#: Cura/util/profile.py:494
-msgid "Model colour (3)"
-msgstr "模型颜色(3）"
-
-#: Cura/util/profile.py:494
-msgid "Display color for third extruder"
-msgstr "第三个喷嘴的颜色"
-
-#: Cura/util/profile.py:495
-msgid "Model colour (4)"
-msgstr "模型颜色(4)"
-
-#: Cura/util/profile.py:495
-msgid "Display color for forth extruder"
-msgstr "第四个喷嘴的颜色"
-
-#: Cura/util/profile.py:496
-msgid "Printing window type"
-msgstr "打印窗口类型"
-
-#: Cura/util/profile.py:496
-msgid "Select the interface used for USB printing."
-msgstr "USB接口"
-
-#: Cura/util/profile.py:508
-msgid "Maximum width (mm)"
-msgstr "最大宽度 (mm)"
-
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510
-msgid "Size of the machine in mm"
-msgstr "机器的打印尺寸(mm)"
-
-#: Cura/util/profile.py:509
-msgid "Maximum depth (mm)"
-msgstr "最大深度(mm)"
-
-#: Cura/util/profile.py:510
-msgid "Maximum height (mm)"
-msgstr "最大高度 (mm)"
-
-#: Cura/util/profile.py:511
-msgid "Machine center 0,0"
-msgstr "平台中心 0,0"
-
-#: Cura/util/profile.py:511
-msgid ""
-"Machines firmware defines the center of the bed as 0,0 instead of the front "
-"left corner."
-msgstr "固件规定平台中心为0,0,而不是左前角"
-
-#: Cura/util/profile.py:512
-msgid "Build area shape"
-msgstr "构建平台形状"
-
-#: Cura/util/profile.py:512
-msgid "The shape of machine build area."
-msgstr "机器构建平台的形状"
-
-#: Cura/util/profile.py:514
-msgid ""
-"If you have an heated bed, this enabled heated bed settings (requires "
-"restart)"
-msgstr "如果你有热床,这里可以打开热床设置(需要重启)"
-
-#: Cura/util/profile.py:515
-msgid "GCode Flavor"
-msgstr "Gcode类型"
-
-#: Cura/util/profile.py:515
-msgid ""
-"Flavor of generated GCode.\n"
-"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
-"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
-"machine instead of the slicer.\n"
-"MakerBot GCode has a few changes in the way GCode is generated, but still "
-"requires MakerWare to generate to X3G.\n"
-"BFB style generates RPM based code.\n"
-"Mach3 uses A,B,C instead of E for extruders."
-msgstr ""
-"GCode生成的风格\n"
-"RepRap一般是5D GCode,兼容于Marlin/Sprinter固件\n"
-"UltiGCode是一种GCode派生,把部分配置放到里机器里,而不是切片软件\n"
-
-#: Cura/util/profile.py:516
-msgid "Extruder count"
-msgstr "挤出机数量"
-
-#: Cura/util/profile.py:516
-msgid "Amount of extruders in your machine."
-msgstr "你机器所配备的挤出头的数量"
-
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521
-msgid "Offset X"
-msgstr "X偏移"
-
-#: Cura/util/profile.py:517 Cura/util/profile.py:518
-msgid "The offset of your secondary extruder compared to the primary."
-msgstr "相对于首要打印头的偏移"
-
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522
-msgid "Offset Y"
-msgstr "Y偏移"
-
-#: Cura/util/profile.py:519 Cura/util/profile.py:520
-msgid "The offset of your tertiary extruder compared to the primary."
-msgstr "相对于首要打印头的偏移"
-
-#: Cura/util/profile.py:521 Cura/util/profile.py:522
-msgid "The offset of your forth extruder compared to the primary."
-msgstr "相对于首要打印头的偏移"
-
-#: Cura/util/profile.py:523
-msgid "E-Steps per 1mm filament"
-msgstr "1mm挤出量E电机步数(Step per E)"
-
-#: Cura/util/profile.py:523
-msgid ""
-"Amount of steps per mm filament extrusion. If set to 0 then this value is "
-"ignored and the value in your firmware is used."
-msgstr "机器挤出1mm所需要的电机步数"
-
-#: Cura/util/profile.py:524
-msgid "Serial port"
-msgstr "端口"
-
-#: Cura/util/profile.py:524
-msgid "Serial port to use for communication with the printer"
-msgstr "用来连接你的打印及的串口端口"
-
-#: Cura/util/profile.py:526
-msgid "Baudrate"
-msgstr "波特率"
-
-#: Cura/util/profile.py:526
-msgid ""
-"Speed of the serial port communication\n"
-"Needs to match your firmware settings\n"
-"Common values are 250000, 115200, 57600"
-msgstr ""
-"串口端口所使用的速率\n"
-"需要和你所使用的固件匹配\n"
-"一般为250000, 115200, 57600"
-
-#: Cura/util/profile.py:529
-msgid "Head size towards X min (mm)"
-msgstr "到X最小值方向的喷头大小 (mm)"
-
-#: Cura/util/profile.py:529
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
-"Ultimaker机型,如果风扇在左边,设置成75mm"
-
-#: Cura/util/profile.py:530
-msgid "Head size towards Y min (mm)"
-msgstr "到Y最小值方向的喷头大小 (mm)"
-
-#: Cura/util/profile.py:530 Cura/util/profile.py:531
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
-"Ultimaker机型,如果风扇在左边,设置成18mm'"
-
-#: Cura/util/profile.py:531
-msgid "Head size towards X max (mm)"
-msgstr "到X最大值方向的喷头大小 (mm)"
-
-#: Cura/util/profile.py:532
-msgid "Head size towards Y max (mm)"
-msgstr "到Y最大值方向的喷头大小 (mm)"
-
-#: Cura/util/profile.py:532
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
-"Ultimaker机型,如果风扇在左边,设置成35mm"
-
-#: Cura/util/profile.py:533
-msgid "Printer gantry height (mm)"
-msgstr "十字轴高度 (mm)"
-
-#: Cura/util/profile.py:533
-msgid ""
-"The height of the gantry holding up the printer head. If an object is higher "
-"then this then you cannot print multiple objects one for one. 60mm for an "
-"Ultimaker."
-msgstr ""
-"用来悬挂打印头的十字轴的高度,如果打印物体高于这个高度将无法多物体一起打印"
-
-#: Cura/util/profile.py:535
-#, python-format
-msgid "More flow than 150% is rare and usually not recommended."
-msgstr "流量高于150%一般来说不推荐."
-
-#: Cura/util/profile.py:536
-#, python-format
-msgid "Less flow than 50% is rare and usually not recommended."
-msgstr "不推荐低于50%的流量."
-
-#: Cura/util/profile.py:537
-#, python-format
-msgid ""
-"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
-"are not recommended."
-msgstr "层厚 %.2fmm 大于喷嘴大小 80%% 一般来说不建议,效果不好"
-
-#: Cura/util/profile.py:539
-msgid ""
-"It is highly unlikely that your machine can achieve a printing speed above "
-"150mm/s"
-msgstr "你确定你的机器可以高于150mm/s的打印速度?"
-
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543
-#: Cura/util/profile.py:544
-msgid "Temperatures above 260C could damage your machine, be careful!"
-msgstr "请小心,温度大于260摄氏度可能会损坏你的机器"
-
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547
-#: Cura/util/profile.py:548
-msgid ""
-"Are you sure your filament is that thick? Normal filament is around 3mm or "
-"1.75mm."
-msgstr "你确定你的耗材有这么粗?一般耗材只为3mm或1.75mm"
-
-#: Cura/util/profile.py:549
-msgid ""
-"It is highly unlikely that your machine can achieve a travel speed above "
-"300mm/s"
-msgstr "你确定你的机器可以达到300mm/s的速度?"
-
-#: Cura/util/profile.py:550
-#, python-format
-msgid ""
-"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
-"results and is not recommended."
-msgstr "底层厚度大于 %.2fmm (3/4 喷嘴大小)一般结果都会比较糟糕."
-
-#: Cura/util/sliceEngine.py:93
-#, python-format
-msgid "%d minutes"
-msgstr ""
-
-#: Cura/util/sliceEngine.py:95
-#, python-format
-msgid "%d hour %d minutes"
-msgstr ""
-
-#: Cura/util/sliceEngine.py:96
-#, python-format
-msgid "%d hours %d minutes"
-msgstr ""
-
-#: Cura/util/sliceEngine.py:101
-#, python-format
-msgid "%0.2f meter %0.0f gram"
-msgstr ""
+# SOME DESCRIPTIVE TITLE.\r
+# Copyright (C) YEAR David Braam\r
+# This file is distributed under the same license as the PACKAGE package.\r
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.\r
+#\r
+msgid ""\r
+msgstr ""\r
+"Project-Id-Version: \n"\r
+"Report-Msgid-Bugs-To: \n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
+"PO-Revision-Date: 2015-01-13 12:42+0800\n"\r
+"Last-Translator: \n"\r
+"Language-Team: \n"\r
+"MIME-Version: 1.0\n"\r
+"Content-Type: text/plain; charset=UTF-8\n"\r
+"Content-Transfer-Encoding: 8bit\n"\r
+"X-Generator: Poedit 1.7.3\n"\r
+"Plural-Forms: nplurals=1; plural=0;\n"\r
+"Language: zh_CN\n"\r
+\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
+msgid "A new version of Cura is available, would you like to download?"\r
+msgstr ""\r
+\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
+msgid "New version available"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:231\r
+msgid "Add new machine wizard"\r
+msgstr "添加机型"\r
+\r
+#: Cura/gui/configWizard.py:233\r
+msgid "First time run wizard"\r
+msgstr "配置向导"\r
+\r
+#: Cura/gui/configWizard.py:234\r
+msgid "Welcome, and thanks for trying Cura!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:236\r
+msgid "This wizard will help you in setting up Cura for your machine."\r
+msgstr "配置向导将协助你为你的机型配置Cura"\r
+\r
+#: Cura/gui/configWizard.py:239\r
+msgid "Select your language:"\r
+msgstr "设置你的机型"\r
+\r
+#: Cura/gui/configWizard.py:266\r
+msgid "Older models"\r
+msgstr "打开3D模型"\r
+\r
+#: Cura/gui/configWizard.py:283\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:285\r
+msgid "Select which Printrbot machine you have:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:349\r
+msgid "Other machine information"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:350\r
+msgid "The following pre-defined machine profiles are available"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:351\r
+msgid ""\r
+"Note that these profiles are not guaranteed to give good results,\n"\r
+"or work at all. Extra tweaks might be required.\n"\r
+"If you find issues with the predefined profiles,\n"\r
+"or want an extra profile.\n"\r
+"Please report it at the github issue tracker."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:362\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:380\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:381\r
+msgid "Cura is now ready to be used!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:385\r
+msgid "Custom RepRap information"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:386\r
+msgid ""\r
+"RepRap machines can be vastly different, so here you can set your own "\r
+"settings."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:387\r
+msgid ""\r
+"Be sure to review the default profile before running it on your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:388\r
+msgid ""\r
+"If you like a default profile for your machine added,\n"\r
+"then make an issue on github."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:390\r
+msgid "You will have to manually install Marlin or Sprinter firmware."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:392\r
+msgid "Machine name"\r
+msgstr "机型名称"\r
+\r
+#: Cura/gui/configWizard.py:393\r
+msgid "Machine width (mm)"\r
+msgstr "构建宽度"\r
+\r
+#: Cura/gui/configWizard.py:394\r
+msgid "Machine depth (mm)"\r
+msgstr "构建深度"\r
+\r
+#: Cura/gui/configWizard.py:395\r
+msgid "Machine height (mm)"\r
+msgstr "构建高度"\r
+\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
+msgid "Nozzle size (mm)"\r
+msgstr "喷嘴孔径"\r
+\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
+msgid "Heated bed"\r
+msgstr "热床"\r
+\r
+#: Cura/gui/configWizard.py:398\r
+msgid "Bed center is 0,0,0 (RoStock)"\r
+msgstr "平台中心为0,0,0"\r
+\r
+#: Cura/gui/configWizard.py:418\r
+msgid "Select your machine"\r
+msgstr "选择你的机型"\r
+\r
+#: Cura/gui/configWizard.py:419\r
+msgid "What kind of machine do you have:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:438\r
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
+msgstr "其他机型"\r
+\r
+#: Cura/gui/configWizard.py:441\r
+msgid ""\r
+"The collection of anonymous usage information helps with the continued "\r
+"improvement of Cura."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:442\r
+msgid ""\r
+"This does NOT submit your models online nor gathers any privacy related "\r
+"information."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:443\r
+msgid "Submit anonymous usage information:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:444\r
+msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:576\r
+msgid "Select upgraded parts you have"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:577\r
+msgid ""\r
+"To assist you in having better default settings for your Ultimaker\n"\r
+"Cura would like to know which upgrades you have in your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:579\r
+msgid "Extruder drive upgrade"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:580\r
+msgid "Heated printer bed (kit)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:581\r
+msgid "Heated printer bed (self built)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:582\r
+msgid "Dual extrusion (experimental)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:584\r
+msgid ""\r
+"If you have an Ultimaker bought after october 2012 you will have the\n"\r
+"Extruder drive upgrade. If you do not have this upgrade,\n"\r
+"it is highly recommended to improve reliability."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:585\r
+msgid ""\r
+"This upgrade can be bought from the Ultimaker webshop\n"\r
+"or found on thingiverse as thing:26094"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:607\r
+msgid "Upgrade Ultimaker Firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:608\r
+msgid ""\r
+"Firmware is the piece of software running directly on your 3D printer.\n"\r
+"This firmware controls the step motors, regulates the temperature\n"\r
+"and ultimately makes your printer work."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:610\r
+msgid ""\r
+"The firmware shipping with new Ultimakers works, but upgrades\n"\r
+"have been made to make better prints, and make calibration easier."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:612\r
+msgid ""\r
+"Cura requires these new features and thus\n"\r
+"your firmware will most likely need to be upgraded.\n"\r
+"You will get the chance to do so now."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:618\r
+msgid "Do not upgrade to this firmware if:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:619\r
+msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:620\r
+msgid "* Build your own heated bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:621\r
+msgid "* Have other changes in the firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:641\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:655\r
+msgid ""\r
+"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
+"You can skip these if you know your machine is functional."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:656\r
+msgid "Run checks"\r
+msgstr "运行检测"\r
+\r
+#: Cura/gui/configWizard.py:656\r
+msgid "Skip checks"\r
+msgstr "跳过检测"\r
+\r
+#: Cura/gui/configWizard.py:660\r
+msgid "Communication:"\r
+msgstr "通信:"\r
+\r
+#: Cura/gui/configWizard.py:661\r
+msgid "Temperature:"\r
+msgstr "温度:"\r
+\r
+#: Cura/gui/configWizard.py:662\r
+msgid "Endstops:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:667\r
+msgid "Show error log"\r
+msgstr "显示错误日志"\r
+\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
+msgid "Connecting to machine."\r
+msgstr "正在连接打印机"\r
+\r
+#: Cura/gui/configWizard.py:722\r
+msgid "Cooldown before temperature check."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
+msgid "Checking the heater and temperature sensor."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:746\r
+msgid "Please make sure none of the endstops are pressed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:759\r
+msgid "Temperature measurement FAILED!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:764\r
+#, python-format\r
+msgid "Head temperature: %d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
+#, python-format\r
+msgid "Communication State: %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
+msgid "Failed to establish connection with the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
+msgid "Please press the left X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:824\r
+msgid "Please press the right X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:834\r
+msgid "Please press the front Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
+msgid "Please press the top Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:844\r
+msgid "Please press the back Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
+msgid "Checkup finished"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:863\r
+msgid "Please press the bottom Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:912\r
+msgid "Calibrating the Steps Per E requires some manual actions."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:913\r
+msgid "First remove any filament from your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:914\r
+msgid ""\r
+"Next put in your filament so the tip is aligned with the\n"\r
+"top of the extruder drive."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:915\r
+msgid "We'll push the filament 100mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:916\r
+msgid "Extrude 100mm filament"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:917\r
+msgid ""\r
+"Now measure the amount of extruded filament:\n"\r
+"(this can be more or less then 100mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:918\r
+msgid "Save"\r
+msgstr "保存"\r
+\r
+#: Cura/gui/configWizard.py:919\r
+msgid "This results in the following steps per E:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:921\r
+msgid "You can repeat these steps to get better calibration."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:924\r
+msgid ""\r
+"If you still have filament in your printer which needs\n"\r
+"heat to remove, press the heat up button below:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:925\r
+msgid "Heatup for filament removal"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
+msgid ""\r
+"Error: Failed to open serial port to machine\n"\r
+"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1024\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1025\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1026\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1031\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1032\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1037\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
+msgid "Bed leveling wizard"\r
+msgstr "运行平台调平向导..."\r
+\r
+#: Cura/gui/configWizard.py:1100\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "向导将协助你调平平台"\r
+\r
+#: Cura/gui/configWizard.py:1102\r
+msgid "It will do the following steps"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1103\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1104\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1105\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
+msgid "Connect to printer"\r
+msgstr "正在连接打印机"\r
+\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
+msgid "Resume"\r
+msgstr "恢复"\r
+\r
+#: Cura/gui/configWizard.py:1113\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1113\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1174\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1184\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1191\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1206\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1220\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1227\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1267\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1272\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1274\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1278\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1282\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1286\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1288\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1297\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1309\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1330\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "向导将协助你，为你的机型配置Cura"\r
+\r
+#: Cura/gui/configWizard.py:1363\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1411\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1421\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1476\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1487\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1500\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1509\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1519\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1526\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1575\r
+msgid "Head offset wizard"\r
+msgstr "运行喷头校正向导..."\r
+\r
+#: Cura/gui/expertConfig.py:27\r
+msgid "Expert config"\r
+msgstr "专业设置"\r
+\r
+#: Cura/gui/firmwareInstall.py:71\r
+msgid ""\r
+"I am sorry, but Cura does not ship with a default firmware for your machine "\r
+"configuration."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
+msgid "Firmware update"\r
+msgstr "固件更新"\r
+\r
+#: Cura/gui/firmwareInstall.py:76\r
+msgid ""\r
+"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
+"So updating your RepRap with Cura might or might not work."\r
+msgstr ""\r
+"Cura仅支持基于ATmega2560的机型升级\n"\r
+"升级固件后也许大概有可能你的打印机无法正常工作"\r
+\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
+msgid "OK"\r
+msgstr "确定"\r
+\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
+msgid "Reading firmware..."\r
+msgstr "读取固件..."\r
+\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
+msgid "Connecting to machine..."\r
+msgstr "连接到打印机..."\r
+\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
+msgid ""\r
+"Please connect the printer to\n"\r
+"your computer with the USB cable."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:130\r
+msgid ""\r
+"Failed to find machine for firmware upgrade\n"\r
+"Is your machine connected to the PC?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:137\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:143\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
+msgid "Uploading firmware..."\r
+msgstr "固件上传中..."\r
+\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
+#, python-format\r
+msgid ""\r
+"Done!\n"\r
+"Installed firmware: %s"\r
+msgstr ""\r
+"完成!\n"\r
+"成功写入固件: %s"\r
+\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
+msgid "Failed to write firmware.\n"\r
+msgstr "固件写入失败\n"\r
+\r
+#: Cura/gui/firmwareInstall.py:297\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "连接下载器失败\n"\r
+\r
+#: Cura/gui/mainWindow.py:72\r
+msgid "Load model file...\tCTRL+L"\r
+msgstr "读取模型文件...\tCTRL+L"\r
+\r
+#: Cura/gui/mainWindow.py:74\r
+msgid "Save model...\tCTRL+S"\r
+msgstr "保存模型...\tCTRL+S"\r
+\r
+#: Cura/gui/mainWindow.py:76\r
+msgid "Reload platform\tF5"\r
+msgstr "重新载入模型\tF5"\r
+\r
+#: Cura/gui/mainWindow.py:78\r
+msgid "Clear platform"\r
+msgstr "清除所有模型"\r
+\r
+#: Cura/gui/mainWindow.py:82\r
+msgid "Print...\tCTRL+P"\r
+msgstr "打印...\tCTRL+P"\r
+\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
+msgid "Save GCode..."\r
+msgstr "保存GCode..."\r
+\r
+#: Cura/gui/mainWindow.py:86\r
+msgid "Show slice engine log..."\r
+msgstr "显示切片引擎记录..."\r
+\r
+#: Cura/gui/mainWindow.py:90\r
+msgid "Open Profile..."\r
+msgstr "打开配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:93\r
+msgid "Save Profile..."\r
+msgstr "保存配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:100\r
+msgid "Load Profile from GCode..."\r
+msgstr "从Gcode中读取配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:104\r
+msgid "Reset Profile to default"\r
+msgstr "恢复默认配置..."\r
+\r
+#: Cura/gui/mainWindow.py:109\r
+msgid "Preferences...\tCTRL+,"\r
+msgstr "偏好配置......\tCTRL+,"\r
+\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
+msgid "Machine settings..."\r
+msgstr "机型设置..."\r
+\r
+#: Cura/gui/mainWindow.py:117\r
+msgid "Recent Model Files"\r
+msgstr "最近使用的模型文件"\r
+\r
+#: Cura/gui/mainWindow.py:124\r
+msgid "Recent Profile Files"\r
+msgstr "最近使用的配置文件"\r
+\r
+#: Cura/gui/mainWindow.py:130\r
+msgid "Quit"\r
+msgstr "退出"\r
+\r
+#: Cura/gui/mainWindow.py:132\r
+msgid "File"\r
+msgstr "文件"\r
+\r
+#: Cura/gui/mainWindow.py:140\r
+msgid "Minecraft map import..."\r
+msgstr "导入Minecraft地图..."\r
+\r
+#: Cura/gui/mainWindow.py:144\r
+msgid "PID Debugger..."\r
+msgstr "PID调试器..."\r
+\r
+#: Cura/gui/mainWindow.py:146\r
+msgid "Auto Firmware Update..."\r
+msgstr "固件自动更新..."\r
+\r
+#: Cura/gui/mainWindow.py:153\r
+msgid "Print all at once"\r
+msgstr "同时打印多个模型"\r
+\r
+#: Cura/gui/mainWindow.py:155\r
+msgid "Print one at a time"\r
+msgstr "逐个打印模型"\r
+\r
+#: Cura/gui/mainWindow.py:162\r
+msgid "Tools"\r
+msgstr "工具"\r
+\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
+msgid "Machine"\r
+msgstr "机型"\r
+\r
+#: Cura/gui/mainWindow.py:171\r
+msgid "Switch to quickprint..."\r
+msgstr "切换到快速打印模式..."\r
+\r
+#: Cura/gui/mainWindow.py:175\r
+msgid "Switch to full settings..."\r
+msgstr "切换到完整配置模式..."\r
+\r
+#: Cura/gui/mainWindow.py:180\r
+msgid "Open expert settings...\tCTRL+E"\r
+msgstr "额外设置...\tCTRL+E"\r
+\r
+#: Cura/gui/mainWindow.py:184\r
+msgid "Run bed leveling wizard..."\r
+msgstr "运行平台调平向导..."\r
+\r
+#: Cura/gui/mainWindow.py:186\r
+msgid "Run head offset wizard..."\r
+msgstr "运行多喷头校正向导..."\r
+\r
+#: Cura/gui/mainWindow.py:189\r
+msgid "Expert"\r
+msgstr "专业设置"\r
+\r
+#: Cura/gui/mainWindow.py:192\r
+msgid "Online documentation..."\r
+msgstr "在线文档..."\r
+\r
+#: Cura/gui/mainWindow.py:194\r
+msgid "Report a problem..."\r
+msgstr "问题提交..."\r
+\r
+#: Cura/gui/mainWindow.py:196\r
+msgid "Check for update..."\r
+msgstr "检查更新..."\r
+\r
+#: Cura/gui/mainWindow.py:198\r
+msgid "Open YouMagine website..."\r
+msgstr "打开YouMagine网站..."\r
+\r
+#: Cura/gui/mainWindow.py:200\r
+msgid "About Cura..."\r
+msgstr "关于Cura..."\r
+\r
+#: Cura/gui/mainWindow.py:202\r
+msgid "Help"\r
+msgstr "帮助"\r
+\r
+#: Cura/gui/mainWindow.py:390\r
+msgid ""\r
+"For \"One at a time\" printing, you need to have entered the correct head "\r
+"size and gantry height in the machine settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:390\r
+msgid "One at a time warning"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:478\r
+msgid "Add new machine..."\r
+msgstr "添加机型..."\r
+\r
+#: Cura/gui/mainWindow.py:486\r
+msgid "Install default firmware..."\r
+msgstr "安装默认固件..."\r
+\r
+#: Cura/gui/mainWindow.py:489\r
+msgid "Install custom firmware..."\r
+msgstr "安装自定义固件..."\r
+\r
+#: Cura/gui/mainWindow.py:493\r
+msgid "Select profile file to load"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:505\r
+msgid "Select gcode file to load profile from"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:520\r
+msgid ""\r
+"No profile found in GCode file.\n"\r
+"This feature only works with GCode files made by Cura 12.07 or newer."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:520\r
+msgid "Profile load error"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
+msgid "Select profile file to save"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:544\r
+msgid ""\r
+"This will reset all profile settings to defaults.\n"\r
+"Unless you have saved your current profile, all settings will be lost!\n"\r
+"Do you really want to reset?"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:544\r
+msgid "Profile reset"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid "Profile copy"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:572\r
+msgid ""\r
+"Warning: Installing a custom firmware does not guarantee that you machine "\r
+"will function correctly, and could damage your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
+msgid "Open firmware to upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:645\r
+msgid "You are running the latest version of Cura!"\r
+msgstr "你正在运行最新版本的的Cura!"\r
+\r
+#: Cura/gui/mainWindow.py:645\r
+msgid "Awesome!"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:690\r
+msgid "Basic"\r
+msgstr "基本"\r
+\r
+#: Cura/gui/mainWindow.py:694\r
+msgid "Advanced"\r
+msgstr "高级"\r
+\r
+#: Cura/gui/mainWindow.py:700\r
+msgid "Plugins"\r
+msgstr "插件"\r
+\r
+#: Cura/gui/pluginPanel.py:31\r
+msgid "Plugins:"\r
+msgstr "插件:"\r
+\r
+#: Cura/gui/pluginPanel.py:35\r
+msgid "Open plugin location"\r
+msgstr "打开本地插件"\r
+\r
+#: Cura/gui/pluginPanel.py:36\r
+msgid "Enabled plugins"\r
+msgstr "开启插件"\r
+\r
+#: Cura/gui/pluginPanel.py:159\r
+msgid "You need to select a plugin before you can add anything."\r
+msgstr "在你添加其他之前你需要选择一个插件"\r
+\r
+#: Cura/gui/pluginPanel.py:159\r
+msgid "Error: no plugin selected"\r
+msgstr "错误：没有选中吃插件"\r
+\r
+#: Cura/gui/preferencesDialog.py:15\r
+msgid "Preferences"\r
+msgstr "偏好配置......\tCTRL+,"\r
+\r
+#: Cura/gui/preferencesDialog.py:29\r
+msgid "Print window"\r
+msgstr "打印窗口"\r
+\r
+#: Cura/gui/preferencesDialog.py:32\r
+msgid "Colours"\r
+msgstr "颜色"\r
+\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
+msgid "Language"\r
+msgstr "语言"\r
+\r
+#: Cura/gui/preferencesDialog.py:41\r
+msgid "Filament settings"\r
+msgstr "材料设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:58\r
+msgid "Cura settings"\r
+msgstr "Cura设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
+msgid "Machine settings"\r
+msgstr "机型设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:124\r
+msgid "Printer head size"\r
+msgstr "打印头尺寸"\r
+\r
+#: Cura/gui/preferencesDialog.py:132\r
+#, python-format\r
+msgid "Extruder %d"\r
+msgstr "挤出机 %d"\r
+\r
+#: Cura/gui/preferencesDialog.py:136\r
+msgid "Communication settings"\r
+msgstr "通信设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:148\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:152\r
+msgid "Add new machine"\r
+msgstr "添加机型"\r
+\r
+#: Cura/gui/preferencesDialog.py:156\r
+msgid "Remove machine"\r
+msgstr "移除机型"\r
+\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
+msgid "Change machine name"\r
+msgstr "更改机型名称"\r
+\r
+#: Cura/gui/preferencesDialog.py:182\r
+msgid "Cannot remove the last machine configuration in Cura"\r
+msgstr "Cura中不能移除最后的机型配置"\r
+\r
+#: Cura/gui/preferencesDialog.py:182\r
+msgid "Machine remove error"\r
+msgstr "机型移除错误"\r
+\r
+#: Cura/gui/preferencesDialog.py:196\r
+msgid "Enter the new name:"\r
+msgstr "输入新的名称:"\r
+\r
+#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
+#, python-format\r
+msgid "Printing on %s"\r
+msgstr "%s 正在打印"\r
+\r
+#: Cura/gui/printWindow.py:324\r
+msgid ""\r
+"Your computer is running on battery power.\n"\r
+"Connect your computer to AC power or your print might not finish."\r
+msgstr ""\r
+"你的电脑正在使用电池\n"\r
+"连接电源,否则可能你的打印无法完成"\r
+\r
+#: Cura/gui/printWindow.py:334\r
+msgid ""\r
+"InfoLine from printer connection\n"\r
+"InfoLine from dialog\n"\r
+"Extra line\n"\r
+"More lines for layout\n"\r
+"More lines for layout\n"\r
+"More lines for layout"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:336\r
+msgid "Connect"\r
+msgstr "连接"\r
+\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
+msgid "Print"\r
+msgstr "打印"\r
+\r
+#: Cura/gui/printWindow.py:339\r
+msgid "Pause"\r
+msgstr "暂停"\r
+\r
+#: Cura/gui/printWindow.py:340\r
+msgid "Cancel print"\r
+msgstr "取消打印"\r
+\r
+#: Cura/gui/printWindow.py:341\r
+msgid "Error log"\r
+msgstr "取消打印"\r
+\r
+#: Cura/gui/sceneView.py:65\r
+msgid "Load"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:70\r
+msgid "Rotate"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:71\r
+msgid "Scale"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:72\r
+msgid "Mirror"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
+msgid "Reset"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:75\r
+msgid "Lay flat"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:78\r
+msgid "To max"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:80\r
+msgid "Mirror X"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:81\r
+msgid "Mirror Y"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:82\r
+msgid "Mirror Z"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:90\r
+msgid "Scale X"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:92\r
+msgid "Scale Y"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:94\r
+msgid "Scale Z"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:96\r
+msgid "Size X (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:98\r
+msgid "Size Y (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:100\r
+msgid "Size Z (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:102\r
+msgid "Uniform scale"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "View mode"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Normal"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Overhang"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Transparent"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "X-Ray"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:105\r
+msgid "Layers"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:107\r
+msgid "Share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:224\r
+msgid "Open 3D model"\r
+msgstr "打开3D模型"\r
+\r
+#: Cura/gui/sceneView.py:249\r
+msgid "Save 3D model"\r
+msgstr "保存3D模型"\r
+\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
+#, python-format\r
+msgid "Print with %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:313\r
+msgid "Slice engine log..."\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
+msgid "Save toolpath"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:387\r
+msgid "The slicing engine reported the following"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:387\r
+msgid "Engine log..."\r
+msgstr "引擎记录..."\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "How many copies do you want?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "Number of copies"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:526\r
+msgid "Multiply"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
+msgid "Center on platform"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:857\r
+msgid "Delete object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:858\r
+msgid "Multiply object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:859\r
+msgid "Split object into parts"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:862\r
+msgid "Dual extrusion merge"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:864\r
+msgid "Delete all objects"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:865\r
+msgid "Reload all objects"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:866\r
+msgid "Reset all objects positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:991\r
+msgid "Toolpath to SD"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:1285\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:52\r
+msgid "Print support structure"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:57\r
+msgid "Select a quickprint profile:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:65\r
+msgid "Material:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:73\r
+msgid "Other:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:28\r
+msgid "Height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:32\r
+msgid "Base (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:36\r
+msgid "Width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:40\r
+msgid "Depth (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:42\r
+msgid "Edit"\r
+msgstr "编辑"\r
+\r
+#: Cura/gui/tools/projector.py:43\r
+msgid "Rectangle"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:44\r
+msgid "Circle"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:45\r
+msgid "Draw curves"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:78\r
+msgid "Checking token"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82\r
+msgid "Failed to contact YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153\r
+msgid "YouMagine error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "Cura is now authorized to share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "YouMagine."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:112\r
+msgid "Creating new design on YouMagine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:116\r
+msgid "Failed to create a design, nothing uploaded!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:120\r
+#, python-format\r
+msgid "Building model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:131\r
+#, python-format\r
+msgid "Uploading model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148\r
+#, python-format\r
+msgid "Failed to upload %s!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:137\r
+#, python-format\r
+msgid "Uploading file %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:145\r
+#, python-format\r
+msgid "Uploading image %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:153\r
+msgid "Failed to upload snapshot!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:158\r
+msgid "Publishing design..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:230\r
+msgid "Request authorization from YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:231\r
+msgid "Paste token here"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:237\r
+msgid ""\r
+"To share your designs on YouMagine\n"\r
+"you need an account on YouMagine.com\n"\r
+"and authorize Cura to access your account."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:239\r
+msgid ""\r
+"This will open a browser window where you can\n"\r
+"authorize Cura to access your YouMagine account.\n"\r
+"You can revoke access at any time\n"\r
+"from YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:274\r
+msgid "Design name"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:278\r
+msgid "Publish after upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:279\r
+msgid "Share!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:287\r
+msgid "Add..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:289\r
+msgid "Webcam..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:299\r
+msgid ""\r
+"Directly publish the design after uploading.\n"\r
+"Without this check the design will not be public\n"\r
+"until you publish it yourself on YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:305\r
+msgid "Design name:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:307\r
+msgid "Description:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:309\r
+msgid "Category:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:311\r
+msgid "License:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:314\r
+msgid "Images:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:317\r
+msgid "Related design files:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340\r
+msgid "The name cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344\r
+msgid "New design error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:344\r
+msgid "The description cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "No webcam found on your system"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "Webcam error"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
+#, python-format\r
+msgid "Loading toolpath for visualization (%d%%)"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:242\r
+msgid "An error has occurred during the 3D view drawing."\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:250\r
+msgid "3D window error"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
+msgid "Quality"\r
+msgstr "打印质量"\r
+\r
+#: Cura/util/profile.py:178\r
+msgid "Layer height (mm)"\r
+msgstr "层厚(mm)"\r
+\r
+#: Cura/util/profile.py:178\r
+msgid ""\r
+"Layer height in millimeters.\n"\r
+"This is the most important setting to determine the quality of your print. "\r
+"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "\r
+"0.25mm with an Ultimaker for very fast prints at low quality."\r
+msgstr ""\r
+"每层的厚度\n"\r
+"这是最影响打印质量的设置\n"\r
+"普通质量可设置为0.2mm，高质量设为0.1mm。\n"\r
+"降低打印质量可以提升打印速度"\r
+\r
+#: Cura/util/profile.py:179\r
+msgid "Shell thickness (mm)"\r
+msgstr "壁厚(mm)"\r
+\r
+#: Cura/util/profile.py:179\r
+msgid ""\r
+"Thickness of the outside shell in the horizontal direction.\n"\r
+"This is used in combination with the nozzle size to define the number\n"\r
+"of perimeter lines and the thickness of those perimeter lines."\r
+msgstr ""\r
+"水平方向的边缘厚度\n"\r
+"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"\r
+\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "回退"\r
+\r
+#: Cura/util/profile.py:180\r
+msgid "Enable retraction"\r
+msgstr "开启回退"\r
+\r
+#: Cura/util/profile.py:180\r
+msgid ""\r
+"Retract the filament when the nozzle is moving over a none-printed area. "\r
+"Details about the retraction can be configured in the advanced tab."\r
+msgstr ""\r
+"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"\r
+"在高级设置面板中有更多相关设置"\r
+\r
+#: Cura/util/profile.py:181 Cura/util/profile.py:182\r
+msgid "Fill"\r
+msgstr "填充"\r
+\r
+#: Cura/util/profile.py:181\r
+msgid "Bottom/Top thickness (mm)"\r
+msgstr "底层/顶层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:181\r
+msgid ""\r
+"This controls the thickness of the bottom and top layers, the amount of "\r
+"solid layers put down is calculated by the layer thickness and this value.\n"\r
+"Having this value a multiple of the layer thickness makes sense. And keep it "\r
+"near your wall thickness to make an evenly strong part."\r
+msgstr ""\r
+"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"\r
+"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"\r
+\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "填充"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Fill Density (%)"\r
+msgstr "填充密度(%)"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid ""\r
+"This controls how densely filled the insides of your print will be. For a "\r
+"solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
+"enough.\n"\r
+"This won't affect the outside of the print and only adjusts how strong the "\r
+"part becomes."\r
+msgstr ""\r
+"控制填充密度\n"\r
+"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"\r
+"这个参数不会影响物体的外观，它一般用来调整物体的强度"\r
+\r
+#: Cura/util/profile.py:183\r
+msgid ""\r
+"The nozzle size is very important, this is used to calculate the line width "\r
+"of the infill, and used to calculate the amount of outside wall lines and "\r
+"thickness for the wall thickness you entered in the print settings."\r
+msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"\r
+\r
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
+msgid "Speed and Temperature"\r
+msgstr "速度和温度"\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Print speed (mm/s)"\r
+msgstr "打印速度(mm/s)"\r
+\r
+#: Cura/util/profile.py:184\r
+msgid ""\r
+"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
+"s, but for good quality prints you want to print slower. Printing speed "\r
+"depends on a lot of factors. So you will be experimenting with optimal "\r
+"settings for this."\r
+msgstr ""\r
+"打印速度\n"\r
+"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"\r
+"80mm/s以下\n"\r
+"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"\r
+\r
+#: Cura/util/profile.py:185\r
+msgid "Printing temperature (C)"\r
+msgstr "打印温度(C)"\r
+\r
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
+msgid ""\r
+"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
+"For PLA a value of 210C is usually used.\n"\r
+"For ABS a value of 230C or higher is required."\r
+msgstr ""\r
+"打印时的喷头温度\n"\r
+"PLA通常设置为210C\n"\r
+"ABS通常设置为230C"\r
+\r
+#: Cura/util/profile.py:186\r
+msgid "2nd nozzle temperature (C)"\r
+msgstr "第二打印头温度 (C)"\r
+\r
+#: Cura/util/profile.py:187\r
+msgid "3th nozzle temperature (C)"\r
+msgstr "第三打印头温度 (C)"\r
+\r
+#: Cura/util/profile.py:188\r
+msgid "4th nozzle temperature (C)"\r
+msgstr "第四打印头温度 (C)"\r
+\r
+#: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "第三打印头温度 (C)"\r
+\r
+#: Cura/util/profile.py:190\r
+msgid "Bed temperature (C)"\r
+msgstr "热床温度"\r
+\r
+#: Cura/util/profile.py:190\r
+msgid ""\r
+"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
+msgstr "打印时热床的温度,自己预加热请设置成0"\r
+\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
+msgid "None"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Touching buildplate"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Everywhere"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
+msgid "Support"\r
+msgstr "支撑"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Support type"\r
+msgstr "支撑类型"\r
+\r
+#: Cura/util/profile.py:191\r
+msgid ""\r
+"Type of support structure build.\n"\r
+"\"Touching buildplate\" is the most commonly used support setting.\n"\r
+"\n"\r
+"None does not do any support.\n"\r
+"Touching buildplate only creates support where the support structure will "\r
+"touch the build platform.\n"\r
+"Everywhere creates support even on top of parts of the model."\r
+msgstr ""\r
+"支撑结构类型。\n"\r
+"通常使用\"Touching buildplate\"建立支撑 \n"\r
+"\n"\r
+"选择 None 不会建立支撑\n"\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
+msgid "Brim"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
+msgid "Raft"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr "裙边"\r
+\r
+#: Cura/util/profile.py:192\r
+msgid "Platform adhesion type"\r
+msgstr "粘附平台"\r
+\r
+#: Cura/util/profile.py:192\r
+msgid ""\r
+"Different options that help in preventing corners from lifting due to "\r
+"warping.\n"\r
+"Brim adds a single layer thick flat area around your object which is easy to "\r
+"cut off afterwards, and it is the recommended option.\n"\r
+"Raft adds a thick raster below the object and a thin interface between this "\r
+"and your object.\n"\r
+"(Note that enabling the brim or raft disables the skirt)"\r
+msgstr ""\r
+"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"\r
+"Raft会打印模型前打印一个网状底座\n"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Both"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "First extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Second extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Support dual extrusion"\r
+msgstr "双头打印中的支撑"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid ""\r
+"Which extruder to use for support material, for break-away support you can "\r
+"use both extruders.\n"\r
+"But if one of the materials is more expensive then the other you could "\r
+"select an extruder to use for support material. This causes more extruder "\r
+"switches.\n"\r
+"You can also use the 2nd extruder for soluble support materials."\r
+msgstr ""\r
+"哪个喷嘴用来打印支撑，对于直接剥离的，任意喷嘴都可以\n"\r
+"但是如果某个材料比较贵重,你可以选择另外一个用来用作支撑,这会导致更多的喷头切"\r
+"换\n"\r
+"你还可以用第二喷嘴来打印水溶性支撑\n"\r
+"\"Both\"为两者\n"\r
+"\"First extruder\"为第一个喷嘴（一般为右侧的那个）\n"\r
+"\"Second extruder\"为第二个喷嘴"\r
+\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
+msgid "Dual extrusion"\r
+msgstr "双喷头"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid "Wipe&prime tower"\r
+msgstr "残料擦除塔"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid ""\r
+"The wipe-tower is a tower printed on every layer when switching between "\r
+"nozzles.\n"\r
+"The old nozzle is wiped off on the tower before the new nozzle is used to "\r
+"print the 2nd color."\r
+msgstr ""\r
+"残料擦除塔是用在每层打印头切换的时候打印的\n"\r
+"用来在当前喷嘴打印前擦除前一个喷嘴的料"\r
+\r
+#: Cura/util/profile.py:195\r
+msgid "Wipe&prime tower volume per layer (mm3)"\r
+msgstr "每层擦除塔体积(mm3)"\r
+\r
+#: Cura/util/profile.py:195\r
+msgid ""\r
+"The amount of material put in the wipe/prime tower.\n"\r
+"This is done in volume because in general you want to extrude a\n"\r
+"certain amount of volume to get the extruder going, independent on the layer "\r
+"height.\n"\r
+"This means that with thinner layers, your tower gets bigger."\r
+msgstr ""\r
+"用于擦除塔上的材料的数量.\n"\r
+"用体积,是因为一般你要挤出一定的量,\n"\r
+"来让挤出机继续工作,而有独立于层高\n"\r
+"这意味着,更薄的层,你的塔变大"\r
+\r
+#: Cura/util/profile.py:196\r
+msgid "Ooze shield"\r
+msgstr "溢出保护"\r
+\r
+#: Cura/util/profile.py:196\r
+msgid ""\r
+"The ooze shield is a 1 line thick shell around the object which stands a few "\r
+"mm from the object.\n"\r
+"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
+msgstr ""\r
+"溢出保护是一条几毫米的厚壁\n"\r
+"这个壁在双喷头打印的时候抓去那些无用的漏液"\r
+\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
+msgid "Filament"\r
+msgstr "打印材料"\r
+\r
+#: Cura/util/profile.py:197\r
+msgid "Diameter (mm)"\r
+msgstr "直径(mm)"\r
+\r
+#: Cura/util/profile.py:197\r
+msgid ""\r
+"Diameter of your filament, as accurately as possible.\n"\r
+"If you cannot measure this value you will have to calibrate it, a higher "\r
+"number means less extrusion, a smaller number generates more extrusion."\r
+msgstr ""\r
+"耗材的直径,请尽量精确\n"\r
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"\r
+"更\n"\r
+"高的数值会有更少的料挤出"\r
+\r
+#: Cura/util/profile.py:198\r
+msgid "Diameter2 (mm)"\r
+msgstr "线材直径2 (mm)"\r
+\r
+#: Cura/util/profile.py:198\r
+msgid ""\r
+"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"2号打印头的耗材的直径,请尽量精确\n"\r
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"\r
+"更\n"\r
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"\r
+\r
+#: Cura/util/profile.py:199\r
+msgid "Diameter3 (mm)"\r
+msgstr "线材直径3 (mm)"\r
+\r
+#: Cura/util/profile.py:199\r
+msgid ""\r
+"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"3号打印头的耗材的直径,请尽量精确\n"\r
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"\r
+"更\n"\r
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"\r
+\r
+#: Cura/util/profile.py:200\r
+msgid "Diameter4 (mm)"\r
+msgstr "线材直径4 (mm)"\r
+\r
+#: Cura/util/profile.py:200\r
+msgid ""\r
+"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"4号打印头的耗材的直径,请尽量精确\n"\r
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"\r
+"更\n"\r
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "直径(mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"3号打印头的耗材的直径,请尽量精确\n"\r
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"\r
+"更\n"\r
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"\r
+\r
+#: Cura/util/profile.py:202\r
+msgid "Flow (%)"\r
+msgstr "流量(%)"\r
+\r
+#: Cura/util/profile.py:202\r
+msgid ""\r
+"Flow compensation, the amount of material extruded is multiplied by this "\r
+"value"\r
+msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"\r
+\r
+#: Cura/util/profile.py:203\r
+msgid "Speed (mm/s)"\r
+msgstr "回退速度(mm/s)"\r
+\r
+#: Cura/util/profile.py:203\r
+msgid ""\r
+"Speed at which the filament is retracted, a higher retraction speed works "\r
+"better. But a very high retraction speed can lead to filament grinding."\r
+msgstr ""\r
+"回退丝时的速度\n"\r
+"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"\r
+\r
+#: Cura/util/profile.py:204\r
+msgid "Distance (mm)"\r
+msgstr "回退长度(mm)"\r
+\r
+#: Cura/util/profile.py:204\r
+msgid ""\r
+"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
+"seems to generate good results."\r
+msgstr ""\r
+"丝回退的长度\n"\r
+"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"\r
+\r
+#: Cura/util/profile.py:205\r
+msgid "Dual extrusion switch amount (mm)"\r
+msgstr "双喷头切换回退量 (mm)"\r
+\r
+#: Cura/util/profile.py:205\r
+msgid ""\r
+"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
+"no retraction at all. A value of 16.0mm seems to generate good results."\r
+msgstr "回抽的数量,0为不使用回抽,一般2mm会有比较好的效果"\r
+\r
+#: Cura/util/profile.py:206\r
+msgid "Minimum travel (mm)"\r
+msgstr "最小移动距离(mm)"\r
+\r
+#: Cura/util/profile.py:206\r
+msgid ""\r
+"Minimum amount of travel needed for a retraction to happen at all. To make "\r
+"sure you do not get a lot of retractions in a small area."\r
+msgstr "回抽使用的最小的移动间隔,用来防止在一个很小的范围内不停的使用回抽"\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Enable combing"\r
+msgstr "启用梳理"\r
+\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
+msgid ""\r
+"Combing is the act of avoiding holes in the print for the head to travel "\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract. If 'All', enable combing "\r
+"on all surfaces. If 'No Skin', enable combing on all except skin surfaces."\r
+msgstr ""\r
+"梳理功能可以避免喷头移动后产生的孔\n"\r
+"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"\r
+\r
+#: Cura/util/profile.py:208\r
+msgid "Minimal extrusion before retracting (mm)"\r
+msgstr "回退前最小挤出量(mm)"\r
+\r
+#: Cura/util/profile.py:208\r
+msgid ""\r
+"The minimal amount of extrusion that needs to be done before retracting "\r
+"again if a retraction needs to happen before this minimal is reached the "\r
+"retraction is ignored.\n"\r
+"This avoids retracting a lot on the same piece of filament which flattens "\r
+"the filament and causes grinding issues."\r
+msgstr ""\r
+"最小挤出量一般使用在回抽需要反复发生的时候\n"\r
+"它可以避免那些频繁回抽导致的耗材挖坑现象"\r
+\r
+#: Cura/util/profile.py:209\r
+msgid "Z hop when retracting (mm)"\r
+msgstr "回退时Z轴抬起(mm)"\r
+\r
+#: Cura/util/profile.py:209\r
+msgid ""\r
+"When a retraction is done, the head is lifted by this amount to travel over "\r
+"the print. A value of 0.075 works well. This feature has a lot of positive "\r
+"effect on delta towers."\r
+msgstr ""\r
+"当回退完成,移动的时候打印头会升起一定高度,0.075工作起来比较不错.此功能对打"\r
+"印\n"\r
+"塔类物品有宜."\r
+\r
+#: Cura/util/profile.py:210\r
+msgid "Initial layer thickness (mm)"\r
+msgstr "初始层厚 (mm)"\r
+\r
+#: Cura/util/profile.py:210\r
+msgid ""\r
+"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
+"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
+"the other layers."\r
+msgstr ""\r
+"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"\r
+"始层厚度"\r
+\r
+#: Cura/util/profile.py:211\r
+msgid "Initial layer line width (%)"\r
+msgstr "初始层线宽(%)"\r
+\r
+#: Cura/util/profile.py:211\r
+msgid ""\r
+"Extra width factor for the extrusion on the first layer, on some printers "\r
+"it's good to have wider extrusion on the first layer to get better bed "\r
+"adhesion."\r
+msgstr ""\r
+"下沉模型\n"\r
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
+"数，切除一部分模型再打印"\r
+\r
+#: Cura/util/profile.py:212\r
+msgid "Cut off object bottom (mm)"\r
+msgstr "底层切除(mm)"\r
+\r
+#: Cura/util/profile.py:212\r
+msgid ""\r
+"Sinks the object into the platform, this can be used for objects that do not "\r
+"have a flat bottom and thus create a too small first layer."\r
+msgstr ""\r
+"下沉模型\n"\r
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
+"数，切除一部分模型再打印"\r
+\r
+#: Cura/util/profile.py:214\r
+msgid "Dual extrusion overlap (mm)"\r
+msgstr "两次挤出重叠(mm)"\r
+\r
+#: Cura/util/profile.py:214\r
+msgid ""\r
+"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
+"bonds the different colors together."\r
+msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"\r
+\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
+msgid "Speed"\r
+msgstr "速度"\r
+\r
+#: Cura/util/profile.py:215\r
+msgid "Travel speed (mm/s)"\r
+msgstr "移动速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:215\r
+msgid ""\r
+"Speed at which travel moves are done, a well built Ultimaker can reach "\r
+"speeds of 250mm/s. But some machines might miss steps then."\r
+msgstr ""\r
+"移动喷头时的速度\n"\r
+"此移动速度指非打印状态下的移动速度\n"\r
+"建议不要超过150mm/s,否则可能造成电机丢步"\r
+\r
+#: Cura/util/profile.py:216\r
+msgid "Bottom layer speed (mm/s)"\r
+msgstr "底层速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:216\r
+msgid ""\r
+"Print speed for the bottom layer, you want to print the first layer slower "\r
+"so it sticks better to the printer bed."\r
+msgstr ""\r
+"打印底层的速度\n"\r
+"这个值通常会设置的很低，这样能使底层和平台粘附的更好"\r
+\r
+#: Cura/util/profile.py:217\r
+msgid "Infill speed (mm/s)"\r
+msgstr "填充速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:217\r
+msgid ""\r
+"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
+"used for the infill. Printing the infill faster can greatly reduce printing "\r
+"time, but this can negatively affect print quality."\r
+msgstr ""\r
+"打印内部填充时的速度\n"\r
+"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"\r
+"可能会对打印质量照成一定消极影响"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "底层速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"打印内部填充时的速度\n"\r
+"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"\r
+"可能会对打印质量照成一定消极影响"\r
+\r
+#: Cura/util/profile.py:219\r
+msgid "Outer shell speed (mm/s)"\r
+msgstr "外壳速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:219\r
+msgid ""\r
+"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
+"used. Printing the outer shell at a lower speed improves the final skin "\r
+"quality. However, having a large difference between the inner shell speed "\r
+"and the outer shell speed will effect quality in a negative way."\r
+msgstr ""\r
+"打印机外壳时的速度\n"\r
+"当设置为0时，会使用打印速度作为外壳速度\n"\r
+"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"\r
+"大，可能会对打印质量有一些消极影响"\r
+\r
+#: Cura/util/profile.py:220\r
+msgid "Inner shell speed (mm/s)"\r
+msgstr "内壁速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:220\r
+msgid ""\r
+"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
+"used. Printing the inner shell faster then the outer shell will reduce "\r
+"printing time. It is good to set this somewhere in between the outer shell "\r
+"speed and the infill/printing speed."\r
+msgstr ""\r
+"打印内壁时的速度\n"\r
+"当设置为0时，会使用打印速度作为内壁速度\n"\r
+"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"\r
+"充速度之间的关系"\r
+\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
+msgid "Cool"\r
+msgstr "冷却"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid "Minimal layer time (sec)"\r
+msgstr "每层最小打印时间(sec)"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid ""\r
+"Minimum time spent in a layer, gives the layer time to cool down before the "\r
+"next layer is put on top. If the layer will be placed down too fast the "\r
+"printer will slow down to make sure it has spent at least this amount of "\r
+"seconds printing this layer."\r
+msgstr ""\r
+"打印每层至少要耗费的时间\n"\r
+"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"\r
+"适当降低速度，以保证有这个设定时间"\r
+\r
+#: Cura/util/profile.py:222\r
+msgid "Enable cooling fan"\r
+msgstr "开启风扇冷却"\r
+\r
+#: Cura/util/profile.py:222\r
+msgid ""\r
+"Enable the cooling fan during the print. The extra cooling from the cooling "\r
+"fan is essential during faster prints."\r
+msgstr ""\r
+"在打印期间开启风扇冷却\n"\r
+"在快速打印时开启风扇冷却是很有必要的"\r
+\r
+#: Cura/util/profile.py:224\r
+msgid "Line count"\r
+msgstr "线数"\r
+\r
+#: Cura/util/profile.py:224\r
+msgid ""\r
+"The skirt is a line drawn around the object at the first layer. This helps "\r
+"to prime your extruder, and to see if the object fits on your platform.\n"\r
+"Setting this to 0 will disable the skirt. Multiple skirt lines can help "\r
+"priming your extruder better for small objects."\r
+msgstr ""\r
+"裙边是画在模型第一层外的一条线，可以帮助你准备好你的挤出机，同时可以看到模型"\r
+"是否适合于平台。\n"\r
+"设置为0将关掉裙边功能。多条群边可以帮助你的挤出机适用于打印小一点的模型。"\r
+\r
+#: Cura/util/profile.py:225\r
+msgid "Start distance (mm)"\r
+msgstr "开始距离(mm)"\r
+\r
+#: Cura/util/profile.py:225\r
+msgid ""\r
+"The distance between the skirt and the first layer.\n"\r
+"This is the minimal distance, multiple skirt lines will be put outwards from "\r
+"this distance."\r
+msgstr ""\r
+"群边与打印第一层的距离。\n"\r
+"这个是最小的距离。多条群边线将从这个距离向外扩。"\r
+\r
+#: Cura/util/profile.py:226\r
+msgid "Minimal length (mm)"\r
+msgstr "最小长度(mm)"\r
+\r
+#: Cura/util/profile.py:226\r
+msgid ""\r
+"The minimal length of the skirt, if this minimal length is not reached it "\r
+"will add more skirt lines to reach this minimal lenght.\n"\r
+"Note: If the line count is set to 0 this is ignored."\r
+msgstr ""\r
+"群边的最小长度，如果最小长度没有达到这个值，将自动添加更多群边线来达到这个最"\r
+"小长度。\n"\r
+"注意：如果线的数量被设置为0，这栏将被忽略。"\r
+\r
+#: Cura/util/profile.py:227\r
+msgid "Fan full on at height (mm)"\r
+msgstr "风扇全速开启高度(mm)"\r
+\r
+#: Cura/util/profile.py:227\r
+msgid ""\r
+"The height at which the fan is turned on completely. For the layers below "\r
+"this the fan speed is scaled linearly with the fan off at layer 0."\r
+msgstr "风扇全速开启的高度,在此之下速度将会被从0开始线性分配"\r
+\r
+#: Cura/util/profile.py:228\r
+msgid "Fan speed min (%)"\r
+msgstr "风扇最小速度(%)"\r
+\r
+#: Cura/util/profile.py:228\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
+msgstr ""\r
+"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"\r
+"高\n"\r
+"速中调节,这个速度将在不需要冷却的层中使用."\r
+\r
+#: Cura/util/profile.py:229\r
+msgid "Fan speed max (%)"\r
+msgstr "风扇最大速度(%)"\r
+\r
+#: Cura/util/profile.py:229\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Maximal fan speed is used if the layer is slowed down due to cooling by more "\r
+"than 200%."\r
+msgstr ""\r
+"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"\r
+"高\n"\r
+"速中调节,这个速度将在那些需要200%冷却的层中使用."\r
+\r
+#: Cura/util/profile.py:230\r
+msgid "Minimum speed (mm/s)"\r
+msgstr "最小速度(mm/s)"\r
+\r
+#: Cura/util/profile.py:230\r
+msgid ""\r
+"The minimal layer time can cause the print to slow down so much it starts to "\r
+"ooze. The minimal feedrate protects against this. Even if a print gets "\r
+"slowed down it will never be slower than this minimal speed."\r
+msgstr ""\r
+"最少层时间可能会到时机器打印速度下降,从而导致漏液.这个最小送料速率是用来阻"\r
+"止\n"\r
+"此类情况的.即便机器速度下降,也不会低于这个速度."\r
+\r
+#: Cura/util/profile.py:231\r
+msgid "Cool head lift"\r
+msgstr "喷头移开冷却"\r
+\r
+#: Cura/util/profile.py:231\r
+msgid ""\r
+"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
+"the extra time so the minimal layer time is always hit."\r
+msgstr "当最小打印时间被激活,需要冷却的时候,升起打印头,然后等待到冷却时间达到"\r
+\r
+#: Cura/util/profile.py:232\r
+msgid "Solid infill top"\r
+msgstr "填充顶层"\r
+\r
+#: Cura/util/profile.py:232\r
+msgid ""\r
+"Create a solid top surface, if set to false the top is filled with the fill "\r
+"percentage. Useful for cups/vases."\r
+msgstr ""\r
+"打印一个坚实的顶部表面,如果不勾选,将会以设置的填充比例打印.对于打印花瓶等比"\r
+"较\n"\r
+"有用"\r
+\r
+#: Cura/util/profile.py:233\r
+msgid "Solid infill bottom"\r
+msgstr "填充底层"\r
+\r
+#: Cura/util/profile.py:233\r
+msgid ""\r
+"Create a solid bottom surface, if set to false the bottom is filled with the "\r
+"fill percentage. Useful for buildings."\r
+msgstr ""\r
+"打印一个坚实的底部,如果关闭则会根据填充比例填充,当打印建筑类的时候比较有用"\r
+\r
+#: Cura/util/profile.py:234\r
+msgid "Infill overlap (%)"\r
+msgstr "填充重合(%)"\r
+\r
+#: Cura/util/profile.py:234\r
+msgid ""\r
+"Amount of overlap between the infill and the walls. There is a slight "\r
+"overlap with the walls and the infill so the walls connect firmly to the "\r
+"infill."\r
+msgstr ""\r
+"内部填充和外表面的重合交叉程度,填充和外表面交叉有助于提升外表面和填充的连接坚"\r
+"固性"\r
+\r
+#: Cura/util/profile.py:235\r
+msgid "Structure type"\r
+msgstr "支撑类型"\r
+\r
+#: Cura/util/profile.py:235\r
+msgid ""\r
+"The type of support structure.\n"\r
+"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
+"too strong.\n"\r
+"Lines are single walled lines that break off one at a time. Which is more "\r
+"work to remove, but as it is less strong it does work better on tricky "\r
+"prints."\r
+msgstr ""\r
+"支撑的结构类型\n"\r
+"Grid是一个比较结实的结构,能够一次性剥离,但是有时候太结实了.Line是线条装填充"\r
+\r
+#: Cura/util/profile.py:236\r
+msgid "Overhang angle for support (deg)"\r
+msgstr "支撑临界角(deg)"\r
+\r
+#: Cura/util/profile.py:236\r
+msgid ""\r
+"The minimal angle that overhangs need to have to get support. With 90 degree "\r
+"being horizontal and 0 degree being vertical."\r
+msgstr "在模型上判断需要生成支撑的最小角度,0度是水平的,90度是垂直的"\r
+\r
+#: Cura/util/profile.py:237\r
+msgid "Fill amount (%)"\r
+msgstr "支撑数量"\r
+\r
+#: Cura/util/profile.py:237\r
+#, python-format\r
+msgid ""\r
+"Amount of infill structure in the support material, less material gives "\r
+"weaker support which is easier to remove. 15% seems to be a good average."\r
+msgstr ""\r
+"支撑材料的填充密度,较少的材料可以让支撑比较容易剥离.15%是个比较合适的值."\r
+\r
+#: Cura/util/profile.py:238\r
+msgid "Distance X/Y (mm)"\r
+msgstr "X/Y轴距离"\r
+\r
+#: Cura/util/profile.py:238\r
+msgid ""\r
+"Distance of the support material from the print, in the X/Y directions.\n"\r
+"0.7mm gives a nice distance from the print so the support does not stick to "\r
+"the print."\r
+msgstr ""\r
+"支撑材料在X/Y方向和物体的距离\n"\r
+"0.7mm 是一个比较合适的支撑距离,这样支撑和打印物体不会黏在一起"\r
+\r
+#: Cura/util/profile.py:239\r
+msgid "Distance Z (mm)"\r
+msgstr "Z轴距离"\r
+\r
+#: Cura/util/profile.py:239\r
+msgid ""\r
+"Distance from the top/bottom of the support to the print. A small gap here "\r
+"makes it easier to remove the support but makes the print a bit uglier.\n"\r
+"0.15mm gives a good seperation of the support material."\r
+msgstr ""\r
+"支撑在Z方向和打印物体的底部和顶部距离,一个小的间距可以让支撑容易被取掉，但"\r
+"是\n"\r
+"会导致打印效果变差\n"\r
+"0.15mm是一个比较好的设置"\r
+\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
+msgid "Black Magic"\r
+msgstr "黑魔法"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid "Spiralize the outer contour"\r
+msgstr "外部轮廓启用Spiralize"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid ""\r
+"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
+"steady Z increase over the whole print. This feature turns a solid object "\r
+"into a single walled print with a solid bottom.\n"\r
+"This feature used to be called Joris in older versions."\r
+msgstr ""\r
+"Spiralize是一个在Z方向帮助打印光滑的功能,它在整个打印过程中会稳固增加Z,这个"\r
+"功\n"\r
+"能可以使得打印物体像有结实底部的单面墙一样.\n"\r
+"这个功能在旧版本里叫Joris."\r
+\r
+#: Cura/util/profile.py:241\r
+msgid "Only follow mesh surface"\r
+msgstr "只打印模型表面"\r
+\r
+#: Cura/util/profile.py:241\r
+msgid ""\r
+"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
+"infill, no top/bottom, nothing."\r
+msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"\r
+\r
+#: Cura/util/profile.py:243\r
+msgid "Brim line amount"\r
+msgstr "边沿走线圈数"\r
+\r
+#: Cura/util/profile.py:243\r
+msgid ""\r
+"The amount of lines used for a brim, more lines means a larger brim which "\r
+"sticks better, but this also makes your effective print area smaller."\r
+msgstr ""\r
+"使用Brim的数量,越大的数字能使你打印的物体更容易粘在平台上,但同时会缩小可用"\r
+"打\n"\r
+"印区域"\r
+\r
+#: Cura/util/profile.py:244\r
+msgid "Extra margin (mm)"\r
+msgstr "额外边缘(mm)"\r
+\r
+#: Cura/util/profile.py:244\r
+msgid ""\r
+"If the raft is enabled, this is the extra raft area around the object which "\r
+"is also rafted. Increasing this margin will create a stronger raft while "\r
+"using more material and leaving less area for your print."\r
+msgstr ""\r
+"如果启用底座,这个是额外的底座区域,增大这个数字可以使得底座更有力,但会缩小你"\r
+"的\n"\r
+"打印区域."\r
+\r
+#: Cura/util/profile.py:245\r
+msgid "Line spacing (mm)"\r
+msgstr "走线间隔(mm)"\r
+\r
+#: Cura/util/profile.py:245\r
+msgid ""\r
+"When you are using the raft this is the distance between the centerlines of "\r
+"the raft line."\r
+msgstr "当使用底座的时候,这个数字用来设置距离中心线的距离"\r
+\r
+#: Cura/util/profile.py:246\r
+msgid "Base thickness (mm)"\r
+msgstr "基底层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:246\r
+msgid ""\r
+"When you are using the raft this is the thickness of the base layer which is "\r
+"put down."\r
+msgstr "底座最底层的厚度"\r
+\r
+#: Cura/util/profile.py:247\r
+msgid "Base line width (mm)"\r
+msgstr "基底层走线宽度(mm)"\r
+\r
+#: Cura/util/profile.py:247\r
+msgid ""\r
+"When you are using the raft this is the width of the base layer lines which "\r
+"are put down."\r
+msgstr "底层线条的宽度"\r
+\r
+#: Cura/util/profile.py:248\r
+msgid "Interface thickness (mm)"\r
+msgstr "接触层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:248\r
+msgid ""\r
+"When you are using the raft this is the thickness of the interface layer "\r
+"which is put down."\r
+msgstr "底座上层的厚度"\r
+\r
+#: Cura/util/profile.py:249\r
+msgid "Interface line width (mm)"\r
+msgstr "接触层走线宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:249\r
+msgid ""\r
+"When you are using the raft this is the width of the interface layer lines "\r
+"which are put down."\r
+msgstr "底座接口层线条的宽度"\r
+\r
+#: Cura/util/profile.py:250\r
+msgid "Airgap"\r
+msgstr "悬空间隙"\r
+\r
+#: Cura/util/profile.py:250\r
+msgid "Gap between the last layer of the raft the whole print."\r
+msgstr "底座和表层的间隔,在使用PLA的时候,0.2mm左右的间隔可以你很好的剥离底座"\r
+\r
+#: Cura/util/profile.py:251\r
+msgid "First Layer Airgap"\r
+msgstr "第一层悬空间隙"\r
+\r
+#: Cura/util/profile.py:251\r
+msgid ""\r
+"Gap between the last layer of the raft and the first printing layer. A small "\r
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
+"value is added on top of the 'Airgap' setting."\r
+msgstr ""\r
+"在基底和模型之间的间隙距离\n"\r
+"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"\r
+\r
+#: Cura/util/profile.py:252\r
+msgid "Surface layers"\r
+msgstr "表层"\r
+\r
+#: Cura/util/profile.py:252\r
+msgid ""\r
+"Amount of surface layers put on top of the raft, these are fully filled "\r
+"layers on which the model is printed."\r
+msgstr "在底座上打印表层的数量,这些层是完全填充的"\r
+\r
+#: Cura/util/profile.py:253\r
+msgid "Surface layer thickness (mm)"\r
+msgstr "初始层厚 (mm)"\r
+\r
+#: Cura/util/profile.py:253\r
+msgid "Thickness of each surface layer."\r
+msgstr "表面层的厚度"\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Surface layer line width (mm)"\r
+msgstr "接触层走线宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Width of the lines for each surface layer."\r
+msgstr "表层线宽"\r
+\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
+msgid "Fix horrible"\r
+msgstr "缺陷修复"\r
+\r
+#: Cura/util/profile.py:255\r
+msgid "Combine everything (Type-A)"\r
+msgstr "闭合面片(Type-A)"\r
+\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
+msgid ""\r
+"This expert option adds all parts of the model together. The result is "\r
+"usually that internal cavities disappear. Depending on the model this can be "\r
+"intended or not. Enabling this option is at your own risk. Type-A is "\r
+"dependent on the model normals and tries to keep some internal holes intact. "\r
+"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
+msgstr ""\r
+"这个专家选项会组合所有的打印物体到一起.结果一般是内部空隙消失了,取决于物体"\r
+"能\n"\r
+"否这样做.A类型是比较正常的,会尽量保持所有的内孔不变.B类型会忽略所有的内部"\r
+"孔,\n"\r
+"只保持外部形状."\r
+\r
+#: Cura/util/profile.py:256\r
+msgid "Combine everything (Type-B)"\r
+msgstr "闭合面片(Type-B)"\r
+\r
+#: Cura/util/profile.py:257\r
+msgid "Keep open faces"\r
+msgstr "保持开放面"\r
+\r
+#: Cura/util/profile.py:257\r
+msgid ""\r
+"This expert option keeps all the open bits of the model intact. Normally "\r
+"Cura tries to stitch up small holes and remove everything with big holes, "\r
+"but this option keeps bits that are not properly part of anything and just "\r
+"goes with whatever is left. This option is usually not what you want, but it "\r
+"might enable you to slice models otherwise failing to produce proper paths.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+"这个选项会保持所有的开放表面不动.正常情况下Cura会尝试着填补所有的洞,但是这"\r
+"个\n"\r
+"选项会打开会则会不理会这些洞.这个选项一般是你所不需要的,除非在出现切片失败"\r
+"的\n"\r
+"情况下,你可能需要打开它.\n"\r
+\r
+#: Cura/util/profile.py:258\r
+msgid "Extensive stitching"\r
+msgstr "拼接"\r
+\r
+#: Cura/util/profile.py:258\r
+msgid ""\r
+"Extensive stitching tries to fix up open holes in the model by closing the "\r
+"hole with touching polygons. This algorthm is quite expensive and could "\r
+"introduce a lot of processing time.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+"拼接选项是在切片时尝试恢复那些开放的面,变成闭合的多边形.但是这个算法非常消"\r
+"耗\n"\r
+"资源,甚至使得处理时间大大增加\n"\r
+"(和所有的修正错误选项一样,实验性质,风险自担)"\r
+\r
+#: Cura/util/profile.py:486\r
+msgid "Save profile on slice"\r
+msgstr "保存切片配置"\r
+\r
+#: Cura/util/profile.py:486\r
+msgid ""\r
+"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
+msgstr "在切片时保存[stl_file]_profile.ini可以用于下个模型"\r
+\r
+#: Cura/util/profile.py:487\r
+msgid "Cost (price/kg)"\r
+msgstr "成本 (price/kg)"\r
+\r
+#: Cura/util/profile.py:487\r
+msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
+msgstr "每公斤的成本花费,用来计算打印物体的成本"\r
+\r
+#: Cura/util/profile.py:488\r
+msgid "Cost (price/m)"\r
+msgstr "成本 (price/m)"\r
+\r
+#: Cura/util/profile.py:488\r
+msgid ""\r
+"Cost of your filament per meter, to estimate the cost of the final print."\r
+msgstr "每公斤的成本花费,用来计算打印物体的成本"\r
+\r
+#: Cura/util/profile.py:489\r
+msgid "Auto detect SD card drive"\r
+msgstr "自动检测SD卡"\r
+\r
+#: Cura/util/profile.py:489\r
+msgid ""\r
+"Auto detect the SD card. You can disable this because on some systems "\r
+"external hard-drives or USB sticks are detected as SD card."\r
+msgstr "自动检测SD卡.你可以在当外接硬盘或者U盘被认为是SD的时候关掉这个选项"\r
+\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
+msgid "Check for updates"\r
+msgstr "检查更新"\r
+\r
+#: Cura/util/profile.py:502\r
+msgid "Check for newer versions of Cura on startup"\r
+msgstr "Cura启动时检查更新"\r
+\r
+#: Cura/util/profile.py:503\r
+msgid "Send usage statistics"\r
+msgstr "提交统计信息"\r
+\r
+#: Cura/util/profile.py:503\r
+msgid "Submit anonymous usage information to improve future versions of Cura"\r
+msgstr "提交匿名的使用信息,用于改进下版本的Cura"\r
+\r
+#: Cura/util/profile.py:505\r
+msgid "Density (kg/m3)"\r
+msgstr "填充密度 (%)"\r
+\r
+#: Cura/util/profile.py:505\r
+msgid ""\r
+"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
+"This value is used to estimate the weight if the filament used for the print."\r
+msgstr ""\r
+"每立方米的耗材重量,PLA大概1240左右,ABS是1040,这个值用来估算打印物体的重量"\r
+\r
+#: Cura/util/profile.py:506\r
+msgid ""\r
+"Change the language in which Cura runs. Switching language requires a "\r
+"restart of Cura"\r
+msgstr "选择语言,需要重启Cura"\r
+\r
+#: Cura/util/profile.py:509\r
+msgid "Model colour"\r
+msgstr "模型颜色"\r
+\r
+#: Cura/util/profile.py:509\r
+msgid "Display color for first extruder"\r
+msgstr "第一个喷嘴的颜色"\r
+\r
+#: Cura/util/profile.py:510\r
+msgid "Model colour (2)"\r
+msgstr "模型颜色(2)"\r
+\r
+#: Cura/util/profile.py:510\r
+msgid "Display color for second extruder"\r
+msgstr "第二个喷嘴的颜色"\r
+\r
+#: Cura/util/profile.py:511\r
+msgid "Model colour (3)"\r
+msgstr "模型颜色(3）"\r
+\r
+#: Cura/util/profile.py:511\r
+msgid "Display color for third extruder"\r
+msgstr "第三个喷嘴的颜色"\r
+\r
+#: Cura/util/profile.py:512\r
+msgid "Model colour (4)"\r
+msgstr "模型颜色(4)"\r
+\r
+#: Cura/util/profile.py:512\r
+msgid "Display color for forth extruder"\r
+msgstr "第四个喷嘴的颜色"\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Printing window type"\r
+msgstr "打印窗口类型"\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Select the interface used for USB printing."\r
+msgstr "USB接口"\r
+\r
+#: Cura/util/profile.py:525\r
+msgid "Maximum width (mm)"\r
+msgstr "最大宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
+msgid "Size of the machine in mm"\r
+msgstr "机器的打印尺寸(mm)"\r
+\r
+#: Cura/util/profile.py:526\r
+msgid "Maximum depth (mm)"\r
+msgstr "最大深度(mm)"\r
+\r
+#: Cura/util/profile.py:527\r
+msgid "Maximum height (mm)"\r
+msgstr "最大高度 (mm)"\r
+\r
+#: Cura/util/profile.py:528\r
+msgid "Machine center 0,0"\r
+msgstr "平台中心 0,0"\r
+\r
+#: Cura/util/profile.py:528\r
+msgid ""\r
+"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
+"left corner."\r
+msgstr "固件规定平台中心为0,0,而不是左前角"\r
+\r
+#: Cura/util/profile.py:529\r
+msgid "Build area shape"\r
+msgstr "构建平台形状"\r
+\r
+#: Cura/util/profile.py:529\r
+msgid "The shape of machine build area."\r
+msgstr "机器构建平台的形状"\r
+\r
+#: Cura/util/profile.py:531\r
+msgid ""\r
+"If you have an heated bed, this enabled heated bed settings (requires "\r
+"restart)"\r
+msgstr "如果你有热床,这里可以打开热床设置(需要重启)"\r
+\r
+#: Cura/util/profile.py:532\r
+msgid "GCode Flavor"\r
+msgstr "Gcode类型"\r
+\r
+#: Cura/util/profile.py:532\r
+msgid ""\r
+"Flavor of generated GCode.\n"\r
+"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
+"UltiGCode is a variation of the RepRap GCode which puts more settings in the "\r
+"machine instead of the slicer.\n"\r
+"MakerBot GCode has a few changes in the way GCode is generated, but still "\r
+"requires MakerWare to generate to X3G.\n"\r
+"BFB style generates RPM based code.\n"\r
+"Mach3 uses A,B,C instead of E for extruders."\r
+msgstr ""\r
+"GCode生成的风格\n"\r
+"RepRap一般是5D GCode,兼容于Marlin/Sprinter固件\n"\r
+"UltiGCode是一种GCode派生,把部分配置放到里机器里,而不是切片软件\n"\r
+\r
+#: Cura/util/profile.py:533\r
+msgid "Extruder count"\r
+msgstr "挤出机数量"\r
+\r
+#: Cura/util/profile.py:533\r
+msgid "Amount of extruders in your machine."\r
+msgstr "你机器所配备的挤出头的数量"\r
+\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
+msgid "Offset X"\r
+msgstr "X偏移"\r
+\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
+msgid "The offset of your secondary extruder compared to the primary."\r
+msgstr "相对于首要打印头的偏移"\r
+\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
+msgid "Offset Y"\r
+msgstr "Y偏移"\r
+\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
+msgid "The offset of your tertiary extruder compared to the primary."\r
+msgstr "相对于首要打印头的偏移"\r
+\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
+msgid "The offset of your forth extruder compared to the primary."\r
+msgstr "相对于首要打印头的偏移"\r
+\r
+#: Cura/util/profile.py:542\r
+msgid "E-Steps per 1mm filament"\r
+msgstr "1mm挤出量E电机步数(Step per E)"\r
+\r
+#: Cura/util/profile.py:542\r
+msgid ""\r
+"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
+"ignored and the value in your firmware is used."\r
+msgstr "机器挤出1mm所需要的电机步数"\r
+\r
+#: Cura/util/profile.py:543\r
+msgid "Serial port"\r
+msgstr "端口"\r
+\r
+#: Cura/util/profile.py:543\r
+msgid "Serial port to use for communication with the printer"\r
+msgstr "用来连接你的打印及的串口端口"\r
+\r
+#: Cura/util/profile.py:545\r
+msgid "Baudrate"\r
+msgstr "波特率"\r
+\r
+#: Cura/util/profile.py:545\r
+msgid ""\r
+"Speed of the serial port communication\n"\r
+"Needs to match your firmware settings\n"\r
+"Common values are 250000, 115200, 57600"\r
+msgstr ""\r
+"串口端口所使用的速率\n"\r
+"需要和你所使用的固件匹配\n"\r
+"一般为250000, 115200, 57600"\r
+\r
+#: Cura/util/profile.py:548\r
+msgid "Head size towards X min (mm)"\r
+msgstr "到X最小值方向的喷头大小 (mm)"\r
+\r
+#: Cura/util/profile.py:548\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"\r
+"Ultimaker机型,如果风扇在左边,设置成75mm"\r
+\r
+#: Cura/util/profile.py:549\r
+msgid "Head size towards Y min (mm)"\r
+msgstr "到Y最小值方向的喷头大小 (mm)"\r
+\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"\r
+"Ultimaker机型,如果风扇在左边,设置成18mm'"\r
+\r
+#: Cura/util/profile.py:550\r
+msgid "Head size towards X max (mm)"\r
+msgstr "到X最大值方向的喷头大小 (mm)"\r
+\r
+#: Cura/util/profile.py:551\r
+msgid "Head size towards Y max (mm)"\r
+msgstr "到Y最大值方向的喷头大小 (mm)"\r
+\r
+#: Cura/util/profile.py:551\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"\r
+"Ultimaker机型,如果风扇在左边,设置成35mm"\r
+\r
+#: Cura/util/profile.py:552\r
+msgid "Printer gantry height (mm)"\r
+msgstr "十字轴高度 (mm)"\r
+\r
+#: Cura/util/profile.py:552\r
+msgid ""\r
+"The height of the gantry holding up the printer head. If an object is higher "\r
+"then this then you cannot print multiple objects one for one. 60mm for an "\r
+"Ultimaker."\r
+msgstr ""\r
+"用来悬挂打印头的十字轴的高度,如果打印物体高于这个高度将无法多物体一起打印"\r
+\r
+#: Cura/util/profile.py:554\r
+#, python-format\r
+msgid "More flow than 150% is rare and usually not recommended."\r
+msgstr "流量高于150%一般来说不推荐."\r
+\r
+#: Cura/util/profile.py:555\r
+#, python-format\r
+msgid "Less flow than 50% is rare and usually not recommended."\r
+msgstr "不推荐低于50%的流量."\r
+\r
+#: Cura/util/profile.py:556\r
+#, python-format\r
+msgid ""\r
+"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
+"are not recommended."\r
+msgstr "层厚 %.2fmm 大于喷嘴大小 80%% 一般来说不建议,效果不好"\r
+\r
+#: Cura/util/profile.py:558\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a printing speed above "\r
+"150mm/s"\r
+msgstr "你确定你的机器可以高于150mm/s的打印速度?"\r
+\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
+msgid "Temperatures above 260C could damage your machine, be careful!"\r
+msgstr "请小心,温度大于260摄氏度可能会损坏你的机器"\r
+\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
+msgid ""\r
+"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
+"1.75mm."\r
+msgstr "你确定你的耗材有这么粗?一般耗材只为3mm或1.75mm"\r
+\r
+#: Cura/util/profile.py:575\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a travel speed above "\r
+"300mm/s"\r
+msgstr "你确定你的机器可以达到300mm/s的速度?"\r
+\r
+#: Cura/util/profile.py:576\r
+#, python-format\r
+msgid ""\r
+"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
+"results and is not recommended."\r
+msgstr "底层厚度大于 %.2fmm (3/4 喷嘴大小)一般结果都会比较糟糕."\r
+\r
+#: Cura/util/sliceEngine.py:93\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:96\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:101\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "复制配置到剪切板"\r
~ianmdlvl / cura.git / commitdiff