-# SOME DESCRIPTIVE TITLE.\r
-# Copyright (C) 2013\r
-# This file is distributed under the same license as the Cura package.\r
-# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.\r
-#\r
-msgid ""\r
-msgstr ""\r
-"Project-Id-Version: Cura\n"\r
-"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
-"PO-Revision-Date: 2014-09-29 16:02+0800\n"\r
-"Last-Translator: \n"\r
-"Language-Team: coloz <clz@clz.me>\n"\r
-"MIME-Version: 1.0\n"\r
-"Content-Type: text/plain; charset=UTF-8\n"\r
-"Content-Transfer-Encoding: 8bit\n"\r
-"X-Generator: Poedit 1.6.8\n"\r
-"Language: zh_Hans_CN\n"\r
-"Plural-Forms: nplurals=1; plural=0;\n"\r
-\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
-msgid "A new version of Cura is available, would you like to download?"\r
-msgstr ""\r
-\r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
-msgid "New version available"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:231\r
-msgid "Add new machine wizard"\r
-msgstr "添加机型"\r
-\r
-#: Cura/gui/configWizard.py:233\r
-msgid "First time run wizard"\r
-msgstr "配置向导"\r
-\r
-#: Cura/gui/configWizard.py:234\r
-msgid "Welcome, and thanks for trying Cura!"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:236\r
-msgid "This wizard will help you in setting up Cura for your machine."\r
-msgstr "向导将协助你，为你的机型配置Cura"\r
-\r
-#: Cura/gui/configWizard.py:239\r
-#, fuzzy\r
-msgid "Select your language:"\r
-msgstr "设置你的机型"\r
-\r
-#: Cura/gui/configWizard.py:266\r
-#, fuzzy\r
-msgid "Older models"\r
-msgstr "打开3D模型"\r
-\r
-#: Cura/gui/configWizard.py:283\r
-msgid "Printrbot Selection"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:285\r
-msgid "Select which Printrbot machine you have:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:323\r
-msgid "Other machine information"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:324\r
-msgid "The following pre-defined machine profiles are available"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:325\r
-msgid ""\r
-"Note that these profiles are not guaranteed to give good results,\n"\r
-"or work at all. Extra tweaks might be required.\n"\r
-"If you find issues with the predefined profiles,\n"\r
-"or want an extra profile.\n"\r
-"Please report it at the github issue tracker."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:336\r
-msgid "Custom..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:354\r
-msgid "Cura Ready!"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:355\r
-msgid "Cura is now ready to be used!"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:359\r
-msgid "Custom RepRap information"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:360\r
-msgid ""\r
-"RepRap machines can be vastly different, so here you can set your own "\r
-"settings."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:361\r
-msgid ""\r
-"Be sure to review the default profile before running it on your machine."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:362\r
-msgid ""\r
-"If you like a default profile for your machine added,\n"\r
-"then make an issue on github."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:364\r
-msgid "You will have to manually install Marlin or Sprinter firmware."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:366\r
-msgid "Machine name"\r
-msgstr "机型名称"\r
-\r
-#: Cura/gui/configWizard.py:367\r
-msgid "Machine width (mm)"\r
-msgstr "构建宽度"\r
-\r
-#: Cura/gui/configWizard.py:368\r
-msgid "Machine depth (mm)"\r
-msgstr "构建深度"\r
-\r
-#: Cura/gui/configWizard.py:369\r
-msgid "Machine height (mm)"\r
-msgstr "构建高度"\r
-\r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
-msgid "Nozzle size (mm)"\r
-msgstr "喷嘴孔径"\r
-\r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
-msgid "Heated bed"\r
-msgstr "热床"\r
-\r
-#: Cura/gui/configWizard.py:372\r
-msgid "Bed center is 0,0,0 (RoStock)"\r
-msgstr "平台中心为0,0,0"\r
-\r
-#: Cura/gui/configWizard.py:392\r
-msgid "Select your machine"\r
-msgstr "设置你的机型"\r
-\r
-#: Cura/gui/configWizard.py:393\r
-msgid "What kind of machine do you have:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:408\r
-#, fuzzy\r
-msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
-msgstr "其他机型（如MostFun Sail）"\r
-\r
-#: Cura/gui/configWizard.py:411\r
-msgid ""\r
-"The collection of anonymous usage information helps with the continued "\r
-"improvement of Cura."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:412\r
-msgid ""\r
-"This does NOT submit your models online nor gathers any privacy related "\r
-"information."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:413\r
-msgid "Submit anonymous usage information:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:414\r
-msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:531\r
-msgid "Select upgraded parts you have"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:532\r
-msgid ""\r
-"To assist you in having better default settings for your Ultimaker\n"\r
-"Cura would like to know which upgrades you have in your machine."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:534\r
-msgid "Extruder drive upgrade"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:535\r
-msgid "Heated printer bed (kit)"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:536\r
-msgid "Heated printer bed (self built)"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:537\r
-msgid "Dual extrusion (experimental)"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:539\r
-msgid ""\r
-"If you have an Ultimaker bought after october 2012 you will have the\n"\r
-"Extruder drive upgrade. If you do not have this upgrade,\n"\r
-"it is highly recommended to improve reliability."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:540\r
-msgid ""\r
-"This upgrade can be bought from the Ultimaker webshop\n"\r
-"or found on thingiverse as thing:26094"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:562\r
-msgid "Upgrade Ultimaker Firmware"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:563\r
-msgid ""\r
-"Firmware is the piece of software running directly on your 3D printer.\n"\r
-"This firmware controls the step motors, regulates the temperature\n"\r
-"and ultimately makes your printer work."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:565\r
-msgid ""\r
-"The firmware shipping with new Ultimakers works, but upgrades\n"\r
-"have been made to make better prints, and make calibration easier."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:567\r
-msgid ""\r
-"Cura requires these new features and thus\n"\r
-"your firmware will most likely need to be upgraded.\n"\r
-"You will get the chance to do so now."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:573\r
-msgid "Do not upgrade to this firmware if:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:574\r
-msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:575\r
-msgid "* Build your own heated bed"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:576\r
-msgid "* Have other changes in the firmware"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:596\r
-msgid "Ultimaker Checkup"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:610\r
-msgid ""\r
-"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
-"You can skip these if you know your machine is functional."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:611\r
-msgid "Run checks"\r
-msgstr "运行检测"\r
-\r
-#: Cura/gui/configWizard.py:611\r
-msgid "Skip checks"\r
-msgstr "跳过检测"\r
-\r
-#: Cura/gui/configWizard.py:615\r
-msgid "Communication:"\r
-msgstr "通信:"\r
-\r
-#: Cura/gui/configWizard.py:616\r
-msgid "Temperature:"\r
-msgstr "温度:"\r
-\r
-#: Cura/gui/configWizard.py:617\r
-msgid "Endstops:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:622\r
-msgid "Show error log"\r
-msgstr "显示错误日志"\r
-\r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
-msgid "Connecting to machine."\r
-msgstr "正在连接打印机"\r
-\r
-#: Cura/gui/configWizard.py:677\r
-msgid "Cooldown before temperature check."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
-msgid "Checking the heater and temperature sensor."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:701\r
-msgid "Please make sure none of the endstops are pressed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:714\r
-msgid "Temperature measurement FAILED!"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:719\r
-#, python-format\r
-msgid "Head temperature: %d"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
-#, python-format\r
-msgid "Communication State: %s"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
-msgid "Failed to establish connection with the printer."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
-msgid "Please press the left X endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:779\r
-msgid "Please press the right X endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:789\r
-msgid "Please press the front Y endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
-msgid "Please press the top Z endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:799\r
-msgid "Please press the back Y endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
-msgid "Checkup finished"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:818\r
-msgid "Please press the bottom Z endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
-msgid "Ultimaker Calibration"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:867\r
-msgid "Calibrating the Steps Per E requires some manual actions."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:868\r
-msgid "First remove any filament from your machine."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:869\r
-msgid ""\r
-"Next put in your filament so the tip is aligned with the\n"\r
-"top of the extruder drive."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:870\r
-msgid "We'll push the filament 100mm"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:871\r
-msgid "Extrude 100mm filament"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:872\r
-msgid ""\r
-"Now measure the amount of extruded filament:\n"\r
-"(this can be more or less then 100mm)"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:873\r
-msgid "Save"\r
-msgstr "保存"\r
-\r
-#: Cura/gui/configWizard.py:874\r
-msgid "This results in the following steps per E:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:876\r
-msgid "You can repeat these steps to get better calibration."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:879\r
-msgid ""\r
-"If you still have filament in your printer which needs\n"\r
-"heat to remove, press the heat up button below:"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:880\r
-msgid "Heatup for filament removal"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
-msgid ""\r
-"Error: Failed to open serial port to machine\n"\r
-"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:979\r
-msgid "Ultimaker2"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:980\r
-msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:981\r
-msgid "Cura is now ready to be used with your Ultimaker2."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:986\r
-msgid "Lulzbot TAZ/Mini"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:987\r
-msgid "Cura is now ready to be used with your Lulzbot."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:992\r
-msgid "Configuration Wizard"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
-#, fuzzy\r
-msgid "Bed leveling wizard"\r
-msgstr "运行平台调平向导..."\r
-\r
-#: Cura/gui/configWizard.py:1055\r
-#, fuzzy\r
-msgid "This wizard will help you in leveling your printer bed"\r
-msgstr "向导将协助你，为你的机型配置Cura"\r
-\r
-#: Cura/gui/configWizard.py:1057\r
-msgid "It will do the following steps"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1058\r
-msgid "* Move the printer head to each corner"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1059\r
-msgid " and let you adjust the height of the bed to the nozzle"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1060\r
-msgid "* Print a line around the bed to check if it is level"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
-#, fuzzy\r
-msgid "Connect to printer"\r
-msgstr "正在连接打印机"\r
-\r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
-#, fuzzy\r
-msgid "Resume"\r
-msgstr "Reset"\r
-\r
-#: Cura/gui/configWizard.py:1068\r
-msgid "Up 0.2mm"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1068\r
-msgid "Down 0.2mm"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1069\r
-msgid "Up 10mm"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1069\r
-msgid "Down 10mm"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1129\r
-msgid "Homing printer..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1139\r
-msgid "Moving head to back center..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1146\r
-msgid "Moving head to back left corner..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
-msgid "Moving head to front right corner..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1161\r
-msgid "Moving head to back right corner..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1175\r
-msgid "Heating up printer..."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1182\r
-msgid "Printing a square on the printer bed at 0.3mm height."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1222\r
-msgid ""\r
-"Adjust the front left screw of your printer bed\n"\r
-"So the nozzle just hits the bed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1227\r
-msgid ""\r
-"Adjust the back screw of your printer bed\n"\r
-"So the nozzle just hits the bed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1229\r
-msgid ""\r
-"Adjust the back left screw of your printer bed\n"\r
-"So the nozzle just hits the bed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1233\r
-msgid ""\r
-"Adjust the back right screw of your printer bed\n"\r
-"So the nozzle just hits the bed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1237\r
-msgid ""\r
-"Adjust the front right screw of your printer bed\n"\r
-"So the nozzle just hits the bed."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1241\r
-#, python-format\r
-msgid "Heating up printer: %d/%d"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1243\r
-msgid ""\r
-"The printer is hot now. Please insert some PLA filament into the printer."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1252\r
-msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1264\r
-msgid ""\r
-"Calibration finished.\n"\r
-"The squares on the bed should slightly touch each other."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1285\r
-#, fuzzy\r
-msgid ""\r
-"This wizard will help you in calibrating the printer head offsets of your "\r
-"dual extrusion machine"\r
-msgstr "向导将协助你，为你的机型配置Cura"\r
-\r
-#: Cura/gui/configWizard.py:1318\r
-msgid "Printing initial calibration cross"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1366\r
-msgid ""\r
-"Please measure the distance between the horizontal lines in millimeters."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1376\r
-msgid "Printing the fine calibration lines."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1431\r
-msgid ""\r
-"Which horizontal line number lays perfect on top of each other? Front most "\r
-"line is zero."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1442\r
-#, python-format\r
-msgid "Calibration finished. Offsets are: %s %s"\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1455\r
-msgid "Please load both extruders with PLA."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1464\r
-msgid "Homing printer and heating up both extruders."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1474\r
-msgid "Please measure the distance between the vertical lines in millimeters."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1481\r
-msgid ""\r
-"Which vertical line number lays perfect on top of each other? Leftmost line "\r
-"is zero."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:1530\r
-#, fuzzy\r
-msgid "Head offset wizard"\r
-msgstr "运行多喷头校正向导..."\r
-\r
-#: Cura/gui/expertConfig.py:27\r
-#, fuzzy\r
-msgid "Expert config"\r
-msgstr "专业设置"\r
-\r
-#: Cura/gui/firmwareInstall.py:64\r
-msgid ""\r
-"I am sorry, but Cura does not ship with a default firmware for your machine "\r
-"configuration."\r
-msgstr ""\r
-\r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
-msgid "Firmware update"\r
-msgstr "固件更新"\r
-\r
-#: Cura/gui/firmwareInstall.py:69\r
-msgid ""\r
-"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
-"So updating your RepRap with Cura might or might not work."\r
-msgstr ""\r
-"Cura仅支持基于ATmega2560的机型升级\n"\r
-"升级固件后也许大概有可能你的打印机无法正常工作"\r
-\r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
-msgid "OK"\r
-msgstr "确定"\r
-\r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
-msgid "Reading firmware..."\r
-msgstr "读取固件..."\r
-\r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
-msgid "Connecting to machine..."\r
-msgstr "连接到打印机..."\r
-\r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
-msgid ""\r
-"Please connect the printer to\n"\r
-"your computer with the USB cable."\r
-msgstr ""\r
-\r
-#: Cura/gui/firmwareInstall.py:123\r
-msgid ""\r
-"Failed to find machine for firmware upgrade\n"\r
-"Is your machine connected to the PC?"\r
-msgstr ""\r
-\r
-#: Cura/gui/firmwareInstall.py:130\r
-msgid ""\r
-"Failed to install firmware:\n"\r
-"This firmware is not compatible with this machine.\n"\r
-"Trying to install UMO firmware on an UM2 or UMO+?"\r
-msgstr ""\r
-\r
-#: Cura/gui/firmwareInstall.py:136\r
-msgid ""\r
-"Failed to install firmware:\n"\r
-"This firmware is not compatible with this machine.\n"\r
-"Trying to install UM2 or UMO+ firmware on an UMO?"\r
-msgstr ""\r
-\r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
-msgid "Uploading firmware..."\r
-msgstr "固件上传中"\r
-\r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
-#, python-format\r
-msgid ""\r
-"Done!\n"\r
-"Installed firmware: %s"\r
-msgstr ""\r
-"完成!\n"\r
-"成功写入固件: %s"\r
-\r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
-msgid "Failed to write firmware.\n"\r
-msgstr "固件写入失败\n"\r
-\r
-#: Cura/gui/firmwareInstall.py:290\r
-msgid "Failed to connect to programmer.\n"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:72\r
-msgid "Load model file...\tCTRL+L"\r
-msgstr "读取模型文件...\tCTRL+L"\r
-\r
-#: Cura/gui/mainWindow.py:74\r
-msgid "Save model...\tCTRL+S"\r
-msgstr "保存模型...\tCTRL+S"\r
-\r
-#: Cura/gui/mainWindow.py:76\r
-msgid "Reload platform\tF5"\r
-msgstr "重新载入模型\tF5"\r
-\r
-#: Cura/gui/mainWindow.py:78\r
-msgid "Clear platform"\r
-msgstr "清除所有模型"\r
-\r
-#: Cura/gui/mainWindow.py:82\r
-msgid "Print...\tCTRL+P"\r
-msgstr "打印...\tCTRL+P"\r
-\r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
-msgid "Save GCode..."\r
-msgstr "保存GCode..."\r
-\r
-#: Cura/gui/mainWindow.py:86\r
-msgid "Show slice engine log..."\r
-msgstr "显示切片引擎记录..."\r
-\r
-#: Cura/gui/mainWindow.py:90\r
-msgid "Open Profile..."\r
-msgstr "打开配置文件..."\r
-\r
-#: Cura/gui/mainWindow.py:93\r
-msgid "Save Profile..."\r
-msgstr "保存配置文件..."\r
-\r
-#: Cura/gui/mainWindow.py:96\r
-msgid "Load Profile from GCode..."\r
-msgstr "从Gcode中读取配置文件..."\r
-\r
-#: Cura/gui/mainWindow.py:100\r
-msgid "Reset Profile to default"\r
-msgstr "恢复默认配置..."\r
-\r
-#: Cura/gui/mainWindow.py:105\r
-msgid "Preferences...\tCTRL+,"\r
-msgstr "偏好配置......\tCTRL+,"\r
-\r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
-msgid "Machine settings..."\r
-msgstr "机型设置..."\r
-\r
-#: Cura/gui/mainWindow.py:113\r
-msgid "Recent Model Files"\r
-msgstr "最近使用的模型文件"\r
-\r
-#: Cura/gui/mainWindow.py:120\r
-msgid "Recent Profile Files"\r
-msgstr "最近使用的配置文件"\r
-\r
-#: Cura/gui/mainWindow.py:126\r
-msgid "Quit"\r
-msgstr "退出"\r
-\r
-#: Cura/gui/mainWindow.py:128\r
-msgid "File"\r
-msgstr "文件"\r
-\r
-#: Cura/gui/mainWindow.py:136\r
-msgid "Minecraft map import..."\r
-msgstr "导入Minecraft地图..."\r
-\r
-#: Cura/gui/mainWindow.py:140\r
-msgid "PID Debugger..."\r
-msgstr "PID调试器..."\r
-\r
-#: Cura/gui/mainWindow.py:142\r
-#, fuzzy\r
-msgid "Auto Firmware Update..."\r
-msgstr "固件更新"\r
-\r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "复制配置到剪切板"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
-msgid "Print all at once"\r
-msgstr "同时打印多个模型"\r
-\r
-#: Cura/gui/mainWindow.py:151\r
-msgid "Print one at a time"\r
-msgstr "逐个打印模型"\r
-\r
-#: Cura/gui/mainWindow.py:158\r
-msgid "Tools"\r
-msgstr "工具"\r
-\r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
-msgid "Machine"\r
-msgstr "机型"\r
-\r
-#: Cura/gui/mainWindow.py:167\r
-msgid "Switch to quickprint..."\r
-msgstr "切换到快速打印模式..."\r
-\r
-#: Cura/gui/mainWindow.py:171\r
-msgid "Switch to full settings..."\r
-msgstr "切换到完整配置模式..."\r
-\r
-#: Cura/gui/mainWindow.py:176\r
-msgid "Open expert settings...\tCTRL+E"\r
-msgstr "额外设置...\tCTRL+E"\r
-\r
-#: Cura/gui/mainWindow.py:180\r
-msgid "Run bed leveling wizard..."\r
-msgstr "运行平台调平向导..."\r
-\r
-#: Cura/gui/mainWindow.py:182\r
-msgid "Run head offset wizard..."\r
-msgstr "运行多喷头校正向导..."\r
-\r
-#: Cura/gui/mainWindow.py:185\r
-msgid "Expert"\r
-msgstr "专业设置"\r
-\r
-#: Cura/gui/mainWindow.py:188\r
-msgid "Online documentation..."\r
-msgstr "在线文档..."\r
-\r
-#: Cura/gui/mainWindow.py:190\r
-msgid "Report a problem..."\r
-msgstr "问题提交..."\r
-\r
-#: Cura/gui/mainWindow.py:192\r
-msgid "Check for update..."\r
-msgstr "检查更新..."\r
-\r
-#: Cura/gui/mainWindow.py:194\r
-msgid "Open YouMagine website..."\r
-msgstr "打开YouMagine网站..."\r
-\r
-#: Cura/gui/mainWindow.py:196\r
-msgid "About Cura..."\r
-msgstr "关于Cura"\r
-\r
-#: Cura/gui/mainWindow.py:198\r
-msgid "Help"\r
-msgstr "帮助"\r
-\r
-#: Cura/gui/mainWindow.py:379\r
-msgid ""\r
-"For \"One at a time\" printing, you need to have entered the correct head "\r
-"size and gantry height in the machine settings"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:379\r
-msgid "One at a time warning"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:467\r
-#, fuzzy\r
-msgid "Add new machine..."\r
-msgstr "添加机型"\r
-\r
-#: Cura/gui/mainWindow.py:475\r
-msgid "Install default firmware..."\r
-msgstr "安装默认固件..."\r
-\r
-#: Cura/gui/mainWindow.py:478\r
-msgid "Install custom firmware..."\r
-msgstr "安装自定义固件"\r
-\r
-#: Cura/gui/mainWindow.py:482\r
-msgid "Select profile file to load"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:494\r
-msgid "Select gcode file to load profile from"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:509\r
-msgid ""\r
-"No profile found in GCode file.\n"\r
-"This feature only works with GCode files made by Cura 12.07 or newer."\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:509\r
-msgid "Profile load error"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:513\r
-msgid "Select profile file to save"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:523\r
-msgid ""\r
-"This will reset all profile settings to defaults.\n"\r
-"Unless you have saved your current profile, all settings will be lost!\n"\r
-"Do you really want to reset?"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:523\r
-msgid "Profile reset"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:543\r
-msgid ""\r
-"Warning: Installing a custom firmware does not guarantee that you machine "\r
-"will function correctly, and could damage your machine."\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
-msgid "Open firmware to upload"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:616\r
-msgid "You are running the latest version of Cura!"\r
-msgstr "你正在运行最新版本的的Cura!"\r
-\r
-#: Cura/gui/mainWindow.py:616\r
-msgid "Awesome!"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:661\r
-msgid "Basic"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:665\r
-msgid "Advanced"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:671\r
-msgid "Plugins"\r
-msgstr "插件"\r
-\r
-#: Cura/gui/pluginPanel.py:31\r
-msgid "Plugins:"\r
-msgstr "插件:"\r
-\r
-#: Cura/gui/pluginPanel.py:35\r
-msgid "Open plugin location"\r
-msgstr "打开本地插件"\r
-\r
-#: Cura/gui/pluginPanel.py:36\r
-msgid "Enabled plugins"\r
-msgstr "使能插件"\r
-\r
-#: Cura/gui/pluginPanel.py:159\r
-msgid "You need to select a plugin before you can add anything."\r
-msgstr ""\r
-\r
-#: Cura/gui/pluginPanel.py:159\r
-msgid "Error: no plugin selected"\r
-msgstr "错误:没有插件可供选择"\r
-\r
-#: Cura/gui/preferencesDialog.py:14\r
-#, fuzzy\r
-msgid "Preferences"\r
-msgstr "偏好配置......\tCTRL+,"\r
-\r
-#: Cura/gui/preferencesDialog.py:28\r
-msgid "Print window"\r
-msgstr "打印窗口"\r
-\r
-#: Cura/gui/preferencesDialog.py:31\r
-msgid "Colours"\r
-msgstr "颜色"\r
-\r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
-msgid "Language"\r
-msgstr "语言"\r
-\r
-#: Cura/gui/preferencesDialog.py:40\r
-msgid "Filament settings"\r
-msgstr "打印丝"\r
-\r
-#: Cura/gui/preferencesDialog.py:50\r
-msgid "Cura settings"\r
-msgstr "Cura设置"\r
-\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
-msgid "Machine settings"\r
-msgstr "机型设置"\r
-\r
-#: Cura/gui/preferencesDialog.py:95\r
-msgid "Printer head size"\r
-msgstr "打印头尺寸"\r
-\r
-#: Cura/gui/preferencesDialog.py:103\r
-#, python-format\r
-msgid "Extruder %d"\r
-msgstr "挤出机 %d"\r
-\r
-#: Cura/gui/preferencesDialog.py:107\r
-msgid "Communication settings"\r
-msgstr "通信设置"\r
-\r
-#: Cura/gui/preferencesDialog.py:119\r
-msgid "Ok"\r
-msgstr ""\r
-\r
-#: Cura/gui/preferencesDialog.py:123\r
-#, fuzzy\r
-msgid "Add new machine"\r
-msgstr "添加机型"\r
-\r
-#: Cura/gui/preferencesDialog.py:127\r
-#, fuzzy\r
-msgid "Remove machine"\r
-msgstr "设置你的机型"\r
-\r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
-msgid "Change machine name"\r
-msgstr "更改机型名称"\r
-\r
-#: Cura/gui/preferencesDialog.py:153\r
-msgid "Cannot remove the last machine configuration in Cura"\r
-msgstr ""\r
-\r
-#: Cura/gui/preferencesDialog.py:153\r
-msgid "Machine remove error"\r
-msgstr "机型移除错误"\r
-\r
-#: Cura/gui/preferencesDialog.py:167\r
-msgid "Enter the new name:"\r
-msgstr "输入新的名称:"\r
-\r
-#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
-#, python-format\r
-msgid "Printing on %s"\r
-msgstr "%s 正在打印"\r
-\r
-#: Cura/gui/printWindow.py:324\r
-msgid ""\r
-"Your computer is running on battery power.\n"\r
-"Connect your computer to AC power or your print might not finish."\r
-msgstr ""\r
-\r
-#: Cura/gui/printWindow.py:334\r
-msgid ""\r
-"InfoLine from printer connection\n"\r
-"InfoLine from dialog\n"\r
-"Extra line\n"\r
-"More lines for layout\n"\r
-"More lines for layout\n"\r
-"More lines for layout"\r
-msgstr ""\r
-\r
-#: Cura/gui/printWindow.py:336\r
-msgid "Connect"\r
-msgstr "连接"\r
-\r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
-msgid "Print"\r
-msgstr "打印"\r
-\r
-#: Cura/gui/printWindow.py:339\r
-msgid "Pause"\r
-msgstr "暂停"\r
-\r
-#: Cura/gui/printWindow.py:340\r
-msgid "Cancel print"\r
-msgstr "取消打印"\r
-\r
-#: Cura/gui/printWindow.py:341\r
-msgid "Error log"\r
-msgstr "错误日志"\r
-\r
-#: Cura/gui/sceneView.py:64\r
-msgid "Load"\r
-msgstr "Load"\r
-\r
-#: Cura/gui/sceneView.py:69\r
-msgid "Rotate"\r
-msgstr "Rotate"\r
-\r
-#: Cura/gui/sceneView.py:70\r
-msgid "Scale"\r
-msgstr "Scale"\r
-\r
-#: Cura/gui/sceneView.py:71\r
-msgid "Mirror"\r
-msgstr "Mirror"\r
-\r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
-msgid "Reset"\r
-msgstr "Reset"\r
-\r
-#: Cura/gui/sceneView.py:74\r
-msgid "Lay flat"\r
-msgstr "Lay flat"\r
-\r
-#: Cura/gui/sceneView.py:77\r
-msgid "To max"\r
-msgstr "To max"\r
-\r
-#: Cura/gui/sceneView.py:79\r
-msgid "Mirror X"\r
-msgstr "Mirror X"\r
-\r
-#: Cura/gui/sceneView.py:80\r
-msgid "Mirror Y"\r
-msgstr "Mirror Y"\r
-\r
-#: Cura/gui/sceneView.py:81\r
-msgid "Mirror Z"\r
-msgstr "Mirror Z"\r
-\r
-#: Cura/gui/sceneView.py:89\r
-msgid "Scale X"\r
-msgstr "Scale X"\r
-\r
-#: Cura/gui/sceneView.py:91\r
-msgid "Scale Y"\r
-msgstr "Scale Y"\r
-\r
-#: Cura/gui/sceneView.py:93\r
-msgid "Scale Z"\r
-msgstr "Scale Z"\r
-\r
-#: Cura/gui/sceneView.py:95\r
-msgid "Size X (mm)"\r
-msgstr "Size X (mm)"\r
-\r
-#: Cura/gui/sceneView.py:97\r
-msgid "Size Y (mm)"\r
-msgstr "Size Y (mm)"\r
-\r
-#: Cura/gui/sceneView.py:99\r
-msgid "Size Z (mm)"\r
-msgstr "Size Z (mm)"\r
-\r
-#: Cura/gui/sceneView.py:101\r
-msgid "Uniform scale"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "View mode"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "Normal"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "Overhang"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "Transparent"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "X-Ray"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:104\r
-msgid "Layers"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:106\r
-msgid "Share on YouMagine"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:204\r
-msgid "Open 3D model"\r
-msgstr "打开3D模型"\r
-\r
-#: Cura/gui/sceneView.py:229\r
-msgid "Save 3D model"\r
-msgstr "保存3D模型"\r
-\r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
-#, python-format\r
-msgid "Print with %s"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:280\r
-msgid "Slice engine log..."\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
-msgid "Save toolpath"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:352\r
-msgid "The slicing engine reported the following"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:352\r
-msgid "Engine log..."\r
-msgstr "引擎记录..."\r
-\r
-#: Cura/gui/sceneView.py:491\r
-msgid "How many copies do you want?"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:491\r
-msgid "Number of copies"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:491\r
-msgid "Multiply"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:781\r
-msgid "Center on platform"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:782\r
-msgid "Delete object"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:783\r
-msgid "Multiply object"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:784\r
-msgid "Split object into parts"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:786\r
-msgid "Dual extrusion merge"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:788\r
-msgid "Delete all objects"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:789\r
-msgid "Reload all objects"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:912\r
-msgid "Toolpath to SD"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:1206\r
-msgid "Overhang view not working due to lack of OpenGL shaders support."\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:32\r
-msgid "Print support structure"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:37\r
-msgid "Select a quickprint profile:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:47\r
-msgid "Material:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:57\r
-msgid "Other:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/imageToMesh.py:28\r
-msgid "Height (mm)"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/imageToMesh.py:32\r
-msgid "Base (mm)"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/imageToMesh.py:36\r
-msgid "Width (mm)"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/imageToMesh.py:40\r
-msgid "Depth (mm)"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/projector.py:42\r
-msgid "Edit"\r
-msgstr "编辑"\r
-\r
-#: Cura/gui/tools/projector.py:43\r
-msgid "Rectangle"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/projector.py:44\r
-msgid "Circle"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/projector.py:45\r
-msgid "Draw curves"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:78\r
-msgid "Checking token"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:82\r
-msgid "Failed to contact YouMagine.com"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116\r
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
-#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153\r
-msgid "YouMagine error."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:100\r
-msgid "Cura is now authorized to share on YouMagine"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:100\r
-msgid "YouMagine."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:112\r
-msgid "Creating new design on YouMagine..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:116\r
-msgid "Failed to create a design, nothing uploaded!"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:120\r
-#, python-format\r
-msgid "Building model %s..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:131\r
-#, python-format\r
-msgid "Uploading model %s..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
-#: Cura/gui/tools/youmagineGui.py:148\r
-#, python-format\r
-msgid "Failed to upload %s!"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:137\r
-#, python-format\r
-msgid "Uploading file %s..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:145\r
-#, python-format\r
-msgid "Uploading image %s..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:153\r
-msgid "Failed to upload snapshot!"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:158\r
-msgid "Publishing design..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:230\r
-msgid "Request authorization from YouMagine"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:231\r
-msgid "Paste token here"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:237\r
-msgid ""\r
-"To share your designs on YouMagine\n"\r
-"you need an account on YouMagine.com\n"\r
-"and authorize Cura to access your account."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:239\r
-msgid ""\r
-"This will open a browser window where you can\n"\r
-"authorize Cura to access your YouMagine account.\n"\r
-"You can revoke access at any time\n"\r
-"from YouMagine.com"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:274\r
-msgid "Design name"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:278\r
-msgid "Publish after upload"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:279\r
-msgid "Share!"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:287\r
-msgid "Add..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:289\r
-msgid "Webcam..."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:299\r
-msgid ""\r
-"Directly publish the design after uploading.\n"\r
-"Without this check the design will not be public\n"\r
-"until you publish it yourself on YouMagine.com"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:305\r
-msgid "Design name:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:307\r
-msgid "Description:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:309\r
-msgid "Category:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:311\r
-msgid "License:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:314\r
-msgid "Images:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:317\r
-msgid "Related design files:"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:340\r
-msgid "The name cannot be empty"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344\r
-msgid "New design error."\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:344\r
-msgid "The description cannot be empty"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:370\r
-msgid "No webcam found on your system"\r
-msgstr ""\r
-\r
-#: Cura/gui/tools/youmagineGui.py:370\r
-msgid "Webcam error"\r
-msgstr ""\r
-\r
-#: Cura/gui/util/engineResultView.py:168\r
-#, python-format\r
-msgid "Loading toolpath for visualization (%d%%)"\r
-msgstr ""\r
-\r
-#: Cura/gui/util/openglGui.py:242\r
-msgid "An error has occurred during the 3D view drawing."\r
-msgstr ""\r
-\r
-#: Cura/gui/util/openglGui.py:250\r
-msgid "3D window error"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
-msgid "Quality"\r
-msgstr "打印质量"\r
-\r
-#: Cura/util/profile.py:178\r
-msgid "Layer height (mm)"\r
-msgstr "层厚(mm)"\r
-\r
-#: Cura/util/profile.py:178\r
-msgid ""\r
-"Layer height in millimeters.\n"\r
-"This is the most important setting to determine the quality of your print. "\r
-"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "\r
-"0.25mm with an Ultimaker for very fast prints at low quality."\r
-msgstr ""\r
-"每层的厚度\n"\r
-"这是最影响打印质量的设置\n"\r
-"普通质量可设置为0.2mm，高质量设为0.1mm。\n"\r
-"降低打印质量可以提升打印速度"\r
-\r
-#: Cura/util/profile.py:179\r
-msgid "Shell thickness (mm)"\r
-msgstr "壁厚(mm)"\r
-\r
-#: Cura/util/profile.py:179\r
-msgid ""\r
-"Thickness of the outside shell in the horizontal direction.\n"\r
-"This is used in combination with the nozzle size to define the number\n"\r
-"of perimeter lines and the thickness of those perimeter lines."\r
-msgstr ""\r
-"水平方向的边缘厚度\n"\r
-"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"\r
-\r
-#: Cura/util/profile.py:180\r
-msgid "Enable retraction"\r
-msgstr "开启回退"\r
-\r
-#: Cura/util/profile.py:180\r
-msgid ""\r
-"Retract the filament when the nozzle is moving over a none-printed area. "\r
-"Details about the retraction can be configured in the advanced tab."\r
-msgstr ""\r
-"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"\r
-"在高级设置面板中有更多相关设置"\r
-\r
-#: Cura/util/profile.py:181 Cura/util/profile.py:182\r
-msgid "Fill"\r
-msgstr "填充"\r
-\r
-#: Cura/util/profile.py:181\r
-msgid "Bottom/Top thickness (mm)"\r
-msgstr "底层/顶层厚度(mm)"\r
-\r
-#: Cura/util/profile.py:181\r
-msgid ""\r
-"This controls the thickness of the bottom and top layers, the amount of "\r
-"solid layers put down is calculated by the layer thickness and this value.\n"\r
-"Having this value a multiple of the layer thickness makes sense. And keep it "\r
-"near your wall thickness to make an evenly strong part."\r
-msgstr ""\r
-"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"\r
-"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"\r
-\r
-#: Cura/util/profile.py:182\r
-msgid "Fill Density (%)"\r
-msgstr "填充密度(%)"\r
-\r
-#: Cura/util/profile.py:182\r
-msgid ""\r
-"This controls how densely filled the insides of your print will be. For a "\r
-"solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
-"enough.\n"\r
-"This won't affect the outside of the print and only adjusts how strong the "\r
-"part becomes."\r
-msgstr ""\r
-"控制填充密度\n"\r
-"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"\r
-"这个参数不会影响物体的外观，它一般用来调整物体的强度"\r
-\r
-#: Cura/util/profile.py:183\r
-msgid ""\r
-"The nozzle size is very important, this is used to calculate the line width "\r
-"of the infill, and used to calculate the amount of outside wall lines and "\r
-"thickness for the wall thickness you entered in the print settings."\r
-msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"\r
-\r
-#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
-#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
-msgid "Speed and Temperature"\r
-msgstr "速度和温度"\r
-\r
-#: Cura/util/profile.py:184\r
-msgid "Print speed (mm/s)"\r
-msgstr "打印速度(mm/s)"\r
-\r
-#: Cura/util/profile.py:184\r
-msgid ""\r
-"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
-"s, but for good quality prints you want to print slower. Printing speed "\r
-"depends on a lot of factors. So you will be experimenting with optimal "\r
-"settings for this."\r
-msgstr ""\r
-"打印速度\n"\r
-"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"\r
-"80mm/s以下\n"\r
-"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"\r
-\r
-#: Cura/util/profile.py:185\r
-msgid "Printing temperature (C)"\r
-msgstr "打印温度(C)"\r
-\r
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
-msgid ""\r
-"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
-"For PLA a value of 210C is usually used.\n"\r
-"For ABS a value of 230C or higher is required."\r
-msgstr ""\r
-"打印时的喷头温度\n"\r
-"PLA通常设置为210C\n"\r
-"ABS通常设置为230C"\r
-\r
-#: Cura/util/profile.py:186\r
-msgid "2nd nozzle temperature (C)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:187\r
-msgid "3th nozzle temperature (C)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:188\r
-msgid "4th nozzle temperature (C)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:189\r
-msgid "Bed temperature (C)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:189\r
-msgid ""\r
-"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
-msgid "None"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:190\r
-msgid "Touching buildplate"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:190\r
-msgid "Everywhere"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
-msgid "Support"\r
-msgstr "支撑"\r
-\r
-#: Cura/util/profile.py:190\r
-msgid "Support type"\r
-msgstr "支撑类型"\r
-\r
-#: Cura/util/profile.py:190\r
-msgid ""\r
-"Type of support structure build.\n"\r
-"\"Touching buildplate\" is the most commonly used support setting.\n"\r
-"\n"\r
-"None does not do any support.\n"\r
-"Touching buildplate only creates support where the support structure will "\r
-"touch the build platform.\n"\r
-"Everywhere creates support even on top of parts of the model."\r
-msgstr ""\r
-"支撑结构类型。\n"\r
-"通常使用\"Touching buildplate\"建立支撑 \n"\r
-"选择 None 不会建立支撑\n"\r
-"选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"\r
-"选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"\r
-\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
-msgid "Brim"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
-#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
-#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
-msgid "Raft"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:191\r
-msgid "Platform adhesion type"\r
-msgstr "粘附平台"\r
-\r
-#: Cura/util/profile.py:191\r
-msgid ""\r
-"Different options that help in preventing corners from lifting due to "\r
-"warping.\n"\r
-"Brim adds a single layer thick flat area around your object which is easy to "\r
-"cut off afterwards, and it is the recommended option.\n"\r
-"Raft adds a thick raster below the object and a thin interface between this "\r
-"and your object.\n"\r
-"(Note that enabling the brim or raft disables the skirt)"\r
-msgstr ""\r
-"开启这个选项可以防止底面起翘\n"\r
-"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"\r
-"Raft会打印模型前打印一个网状底座\n"\r
-"（注意：开启粘附平台后,会关闭打印开始前的边缘走线功能）"\r
-\r
-#: Cura/util/profile.py:192\r
-msgid "Both"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:192\r
-msgid "First extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:192\r
-msgid "Second extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:192\r
-msgid "Support dual extrusion"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:192\r
-msgid ""\r
-"Which extruder to use for support material, for break-away support you can "\r
-"use both extruders.\n"\r
-"But if one of the materials is more expensive then the other you could "\r
-"select an extruder to use for support material. This causes more extruder "\r
-"switches.\n"\r
-"You can also use the 2nd extruder for soluble support materials."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
-msgid "Dual extrusion"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:193\r
-msgid "Wipe&prime tower"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:193\r
-msgid ""\r
-"The wipe-tower is a tower printed on every layer when switching between "\r
-"nozzles.\n"\r
-"The old nozzle is wiped off on the tower before the new nozzle is used to "\r
-"print the 2nd color."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:194\r
-msgid "Wipe&prime tower volume per layer (mm3)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:194\r
-msgid ""\r
-"The amount of material put in the wipe/prime tower.\n"\r
-"This is done in volume because in general you want to extrude a\n"\r
-"certain amount of volume to get the extruder going, independent on the layer "\r
-"height.\n"\r
-"This means that with thinner layers, your tower gets bigger."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:195\r
-msgid "Ooze shield"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:195\r
-msgid ""\r
-"The ooze shield is a 1 line thick shell around the object which stands a few "\r
-"mm from the object.\n"\r
-"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
-msgid "Filament"\r
-msgstr "打印材料"\r
-\r
-#: Cura/util/profile.py:196\r
-msgid "Diameter (mm)"\r
-msgstr "直径(mm)"\r
-\r
-#: Cura/util/profile.py:196\r
-msgid ""\r
-"Diameter of your filament, as accurately as possible.\n"\r
-"If you cannot measure this value you will have to calibrate it, a higher "\r
-"number means less extrusion, a smaller number generates more extrusion."\r
-msgstr ""\r
-"打印耗材的直径\n"\r
-"MostFun Sail使用的耗材的直径为1.75mm"\r
-\r
-#: Cura/util/profile.py:197\r
-msgid "Diameter2 (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:197\r
-msgid ""\r
-"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
-"as for nozzle 1."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:198\r
-msgid "Diameter3 (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:198\r
-msgid ""\r
-"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
-"as for nozzle 1."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:199\r
-msgid "Diameter4 (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:199\r
-msgid ""\r
-"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
-"as for nozzle 1."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:200\r
-msgid "Flow (%)"\r
-msgstr "流量(%)"\r
-\r
-#: Cura/util/profile.py:200\r
-msgid ""\r
-"Flow compensation, the amount of material extruded is multiplied by this "\r
-"value"\r
-msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"\r
-\r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "回退"\r
-\r
-#: Cura/util/profile.py:201\r
-msgid "Speed (mm/s)"\r
-msgstr "回退速度(mm/s)"\r
-\r
-#: Cura/util/profile.py:201\r
-msgid ""\r
-"Speed at which the filament is retracted, a higher retraction speed works "\r
-"better. But a very high retraction speed can lead to filament grinding."\r
-msgstr ""\r
-"回退丝时的速度\n"\r
-"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"\r
-\r
-#: Cura/util/profile.py:202\r
-msgid "Distance (mm)"\r
-msgstr "回退长度(mm)"\r
-\r
-#: Cura/util/profile.py:202\r
-msgid ""\r
-"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
-"seems to generate good results."\r
-msgstr ""\r
-"丝回退的长度\n"\r
-"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"\r
-\r
-#: Cura/util/profile.py:203\r
-msgid "Dual extrusion switch amount (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:203\r
-msgid ""\r
-"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
-"no retraction at all. A value of 16.0mm seems to generate good results."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:204\r
-msgid "Minimum travel (mm)"\r
-msgstr "最小移动距离(mm)"\r
-\r
-#: Cura/util/profile.py:204\r
-msgid ""\r
-"Minimum amount of travel needed for a retraction to happen at all. To make "\r
-"sure you do not get a lot of retractions in a small area."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:205\r
-msgid "Enable combing"\r
-msgstr "开启梳理"\r
-\r
-#: Cura/util/profile.py:205\r
-msgid ""\r
-"Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
-msgstr ""\r
-"梳理功能可以避免喷头移动后产生的孔\n"\r
-"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"\r
-\r
-#: Cura/util/profile.py:206\r
-msgid "Minimal extrusion before retracting (mm)"\r
-msgstr "回退前最小挤出量(mm)"\r
-\r
-#: Cura/util/profile.py:206\r
-msgid ""\r
-"The minimal amount of extrusion that needs to be done before retracting "\r
-"again if a retraction needs to happen before this minimal is reached the "\r
-"retraction is ignored.\n"\r
-"This avoids retracting a lot on the same piece of filament which flattens "\r
-"the filament and causes grinding issues."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:207\r
-msgid "Z hop when retracting (mm)"\r
-msgstr "回退时Z轴抬起(mm)"\r
-\r
-#: Cura/util/profile.py:207\r
-msgid ""\r
-"When a retraction is done, the head is lifted by this amount to travel over "\r
-"the print. A value of 0.075 works well. This feature has a lot of positive "\r
-"effect on delta towers."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:208\r
-msgid "Initial layer thickness (mm)"\r
-msgstr "初始层厚 (mm)"\r
-\r
-#: Cura/util/profile.py:208\r
-msgid ""\r
-"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
-"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
-"the other layers."\r
-msgstr ""\r
-"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"\r
-"始层厚度"\r
-\r
-#: Cura/util/profile.py:209\r
-msgid "Initial layer line width (%)"\r
-msgstr "初始层线宽(%)"\r
-\r
-#: Cura/util/profile.py:209\r
-msgid ""\r
-"Extra width factor for the extrusion on the first layer, on some printers "\r
-"it's good to have wider extrusion on the first layer to get better bed "\r
-"adhesion."\r
-msgstr ""\r
-"下沉模型\n"\r
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
-"数，切除一部分模型再打印"\r
-\r
-#: Cura/util/profile.py:210\r
-msgid "Cut off object bottom (mm)"\r
-msgstr "底层切除(mm)"\r
-\r
-#: Cura/util/profile.py:210\r
-msgid ""\r
-"Sinks the object into the platform, this can be used for objects that do not "\r
-"have a flat bottom and thus create a too small first layer."\r
-msgstr ""\r
-"下沉模型\n"\r
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
-"数，切除一部分模型再打印"\r
-\r
-#: Cura/util/profile.py:212\r
-msgid "Dual extrusion overlap (mm)"\r
-msgstr "两次挤出重叠(mm)"\r
-\r
-#: Cura/util/profile.py:212\r
-msgid ""\r
-"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
-"bonds the different colors together."\r
-msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"\r
-\r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
-msgid "Speed"\r
-msgstr "速度"\r
-\r
-#: Cura/util/profile.py:213\r
-msgid "Travel speed (mm/s)"\r
-msgstr "移动速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:213\r
-msgid ""\r
-"Speed at which travel moves are done, a well built Ultimaker can reach "\r
-"speeds of 250mm/s. But some machines might miss steps then."\r
-msgstr ""\r
-"移动喷头时的速度\n"\r
-"此移动速度指非打印状态下的移动速度\n"\r
-"建议不要超过150mm/s,否则可能造成电机丢步"\r
-\r
-#: Cura/util/profile.py:214\r
-msgid "Bottom layer speed (mm/s)"\r
-msgstr "底层速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:214\r
-msgid ""\r
-"Print speed for the bottom layer, you want to print the first layer slower "\r
-"so it sticks better to the printer bed."\r
-msgstr ""\r
-"打印底层的速度\n"\r
-"这个值通常会设置的很低，这样能使底层和平台粘附的更好"\r
-\r
-#: Cura/util/profile.py:215\r
-msgid "Infill speed (mm/s)"\r
-msgstr "填充速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:215\r
-msgid ""\r
-"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
-"used for the infill. Printing the infill faster can greatly reduce printing "\r
-"time, but this can negatively affect print quality."\r
-msgstr ""\r
-"打印内部填充时的速度\n"\r
-"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"\r
-"可能会对打印质量照成一定消极影响"\r
-\r
-#: Cura/util/profile.py:216\r
-msgid "Outer shell speed (mm/s)"\r
-msgstr "外壳速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:216\r
-msgid ""\r
-"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
-"used. Printing the outer shell at a lower speed improves the final skin "\r
-"quality. However, having a large difference between the inner shell speed "\r
-"and the outer shell speed will effect quality in a negative way."\r
-msgstr ""\r
-"打印机外壳时的速度\n"\r
-"当设置为0时，会使用打印速度作为外壳速度\n"\r
-"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"\r
-"大，可能会对打印质量有一些消极影响"\r
-\r
-#: Cura/util/profile.py:217\r
-msgid "Inner shell speed (mm/s)"\r
-msgstr "内壁速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:217\r
-msgid ""\r
-"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
-"used. Printing the inner shell faster then the outer shell will reduce "\r
-"printing time. It is good to set this somewhere in between the outer shell "\r
-"speed and the infill/printing speed."\r
-msgstr ""\r
-"打印内壁时的速度\n"\r
-"当设置为0时，会使用打印速度作为内壁速度\n"\r
-"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"\r
-"充速度之间的关系"\r
-\r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
-msgid "Cool"\r
-msgstr "冷却"\r
-\r
-#: Cura/util/profile.py:218\r
-msgid "Minimal layer time (sec)"\r
-msgstr "每层最小打印时间(sec)"\r
-\r
-#: Cura/util/profile.py:218\r
-msgid ""\r
-"Minimum time spent in a layer, gives the layer time to cool down before the "\r
-"next layer is put on top. If the layer will be placed down too fast the "\r
-"printer will slow down to make sure it has spent at least this amount of "\r
-"seconds printing this layer."\r
-msgstr ""\r
-"打印每层至少要耗费的时间\n"\r
-"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"\r
-"适当降低速度，以保证有这个设定时间"\r
-\r
-#: Cura/util/profile.py:219\r
-msgid "Enable cooling fan"\r
-msgstr "开启风扇冷却"\r
-\r
-#: Cura/util/profile.py:219\r
-msgid ""\r
-"Enable the cooling fan during the print. The extra cooling from the cooling "\r
-"fan is essential during faster prints."\r
-msgstr ""\r
-"在打印期间开启风扇冷却\n"\r
-"在快速打印时开启风扇冷却是很有必要的"\r
-\r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
-msgid "Line count"\r
-msgstr "线数"\r
-\r
-#: Cura/util/profile.py:221\r
-msgid ""\r
-"The skirt is a line drawn around the object at the first layer. This helps "\r
-"to prime your extruder, and to see if the object fits on your platform.\n"\r
-"Setting this to 0 will disable the skirt. Multiple skirt lines can help "\r
-"priming your extruder better for small objects."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:222\r
-msgid "Start distance (mm)"\r
-msgstr "开始距离(mm)"\r
-\r
-#: Cura/util/profile.py:222\r
-msgid ""\r
-"The distance between the skirt and the first layer.\n"\r
-"This is the minimal distance, multiple skirt lines will be put outwards from "\r
-"this distance."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:223\r
-msgid "Minimal length (mm)"\r
-msgstr "最小距离(mm)"\r
-\r
-#: Cura/util/profile.py:223\r
-msgid ""\r
-"The minimal length of the skirt, if this minimal length is not reached it "\r
-"will add more skirt lines to reach this minimal lenght.\n"\r
-"Note: If the line count is set to 0 this is ignored."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:224\r
-msgid "Fan full on at height (mm)"\r
-msgstr "风扇全速开启高度(mm)"\r
-\r
-#: Cura/util/profile.py:224\r
-msgid ""\r
-"The height at which the fan is turned on completely. For the layers below "\r
-"this the fan speed is scaled linearly with the fan off at layer 0."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:225\r
-msgid "Fan speed min (%)"\r
-msgstr "风扇最小速度(%)"\r
-\r
-#: Cura/util/profile.py:225\r
-msgid ""\r
-"When the fan is turned on, it is enabled at this speed setting. If cool "\r
-"slows down the layer, the fan is adjusted between the min and max speed. "\r
-"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:226\r
-msgid "Fan speed max (%)"\r
-msgstr "风扇最大速度(%)"\r
-\r
-#: Cura/util/profile.py:226\r
-msgid ""\r
-"When the fan is turned on, it is enabled at this speed setting. If cool "\r
-"slows down the layer, the fan is adjusted between the min and max speed. "\r
-"Maximal fan speed is used if the layer is slowed down due to cooling by more "\r
-"than 200%."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:227\r
-msgid "Minimum speed (mm/s)"\r
-msgstr "最小速度 (mm/s)"\r
-\r
-#: Cura/util/profile.py:227\r
-msgid ""\r
-"The minimal layer time can cause the print to slow down so much it starts to "\r
-"ooze. The minimal feedrate protects against this. Even if a print gets "\r
-"slowed down it will never be slower than this minimal speed."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:228\r
-msgid "Cool head lift"\r
-msgstr "喷头移开冷却"\r
-\r
-#: Cura/util/profile.py:228\r
-msgid ""\r
-"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
-"the extra time so the minimal layer time is always hit."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "填充"\r
-\r
-#: Cura/util/profile.py:229\r
-msgid "Solid infill top"\r
-msgstr "填充顶层"\r
-\r
-#: Cura/util/profile.py:229\r
-msgid ""\r
-"Create a solid top surface, if set to false the top is filled with the fill "\r
-"percentage. Useful for cups/vases."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:230\r
-msgid "Solid infill bottom"\r
-msgstr "填充底层"\r
-\r
-#: Cura/util/profile.py:230\r
-msgid ""\r
-"Create a solid bottom surface, if set to false the bottom is filled with the "\r
-"fill percentage. Useful for buildings."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:231\r
-msgid "Infill overlap (%)"\r
-msgstr "填充重合(%)"\r
-\r
-#: Cura/util/profile.py:231\r
-msgid ""\r
-"Amount of overlap between the infill and the walls. There is a slight "\r
-"overlap with the walls and the infill so the walls connect firmly to the "\r
-"infill."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:232\r
-msgid "Structure type"\r
-msgstr "支撑类型"\r
-\r
-#: Cura/util/profile.py:232\r
-msgid ""\r
-"The type of support structure.\n"\r
-"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
-"too strong.\n"\r
-"Lines are single walled lines that break off one at a time. Which is more "\r
-"work to remove, but as it is less strong it does work better on tricky "\r
-"prints."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:233\r
-msgid "Overhang angle for support (deg)"\r
-msgstr "支撑临界角(deg)"\r
-\r
-#: Cura/util/profile.py:233\r
-msgid ""\r
-"The minimal angle that overhangs need to have to get support. With 90 degree "\r
-"being horizontal and 0 degree being vertical."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:234\r
-msgid "Fill amount (%)"\r
-msgstr "支撑密度"\r
-\r
-#: Cura/util/profile.py:234\r
-#, python-format\r
-msgid ""\r
-"Amount of infill structure in the support material, less material gives "\r
-"weaker support which is easier to remove. 15% seems to be a good average."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:235\r
-msgid "Distance X/Y (mm)"\r
-msgstr "X/Y轴距离"\r
-\r
-#: Cura/util/profile.py:235\r
-msgid ""\r
-"Distance of the support material from the print, in the X/Y directions.\n"\r
-"0.7mm gives a nice distance from the print so the support does not stick to "\r
-"the print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:236\r
-msgid "Distance Z (mm)"\r
-msgstr "Z轴距离"\r
-\r
-#: Cura/util/profile.py:236\r
-msgid ""\r
-"Distance from the top/bottom of the support to the print. A small gap here "\r
-"makes it easier to remove the support but makes the print a bit uglier.\n"\r
-"0.15mm gives a good seperation of the support material."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
-msgid "Black Magic"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:237\r
-msgid "Spiralize the outer contour"\r
-msgstr "平滑抬升"\r
-\r
-#: Cura/util/profile.py:237\r
-msgid ""\r
-"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
-"steady Z increase over the whole print. This feature turns a solid object "\r
-"into a single walled print with a solid bottom.\n"\r
-"This feature used to be called Joris in older versions."\r
-msgstr ""\r
-"开启后，可以螺旋状打印表面\n"\r
-"打印出个表面非常光滑，但会丢失内部填充"\r
-\r
-#: Cura/util/profile.py:238\r
-msgid "Only follow mesh surface"\r
-msgstr "平滑表面"\r
-\r
-#: Cura/util/profile.py:238\r
-msgid ""\r
-"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
-"infill, no top/bottom, nothing."\r
-msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"\r
-\r
-#: Cura/util/profile.py:240\r
-msgid "Brim line amount"\r
-msgstr "边沿走线圈数"\r
-\r
-#: Cura/util/profile.py:240\r
-msgid ""\r
-"The amount of lines used for a brim, more lines means a larger brim which "\r
-"sticks better, but this also makes your effective print area smaller."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:241\r
-msgid "Extra margin (mm)"\r
-msgstr "额外边缘(mm)"\r
-\r
-#: Cura/util/profile.py:241\r
-msgid ""\r
-"If the raft is enabled, this is the extra raft area around the object which "\r
-"is also rafted. Increasing this margin will create a stronger raft while "\r
-"using more material and leaving less area for your print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:242\r
-msgid "Line spacing (mm)"\r
-msgstr "走线间隔(mm)"\r
-\r
-#: Cura/util/profile.py:242\r
-msgid ""\r
-"When you are using the raft this is the distance between the centerlines of "\r
-"the raft line."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:243\r
-msgid "Base thickness (mm)"\r
-msgstr "基底层厚度(mm)"\r
-\r
-#: Cura/util/profile.py:243\r
-msgid ""\r
-"When you are using the raft this is the thickness of the base layer which is "\r
-"put down."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:244\r
-msgid "Base line width (mm)"\r
-msgstr "基底层走线宽度(mm)"\r
-\r
-#: Cura/util/profile.py:244\r
-msgid ""\r
-"When you are using the raft this is the width of the base layer lines which "\r
-"are put down."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:245\r
-msgid "Interface thickness (mm)"\r
-msgstr "接触层厚度(mm)"\r
-\r
-#: Cura/util/profile.py:245\r
-msgid ""\r
-"When you are using the raft this is the thickness of the interface layer "\r
-"which is put down."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:246\r
-msgid "Interface line width (mm)"\r
-msgstr "接触层走线宽度 (mm)"\r
-\r
-#: Cura/util/profile.py:246\r
-msgid ""\r
-"When you are using the raft this is the width of the interface layer lines "\r
-"which are put down."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:247\r
-msgid "Airgap"\r
-msgstr "拼合间隙"\r
-\r
-#: Cura/util/profile.py:247\r
-msgid "Gap between the last layer of the raft the whole print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:248\r
-msgid "First Layer Airgap"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:248\r
-#, fuzzy\r
-msgid ""\r
-"Gap between the last layer of the raft and the first printing layer. A small "\r
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
-"value is added on top of the 'Airgap' setting."\r
-msgstr ""\r
-"在基底和模型之间的间隙距离\n"\r
-"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"\r
-\r
-#: Cura/util/profile.py:249\r
-msgid "Surface layers"\r
-msgstr "表层"\r
-\r
-#: Cura/util/profile.py:249\r
-msgid ""\r
-"Amount of surface layers put on top of the raft, these are fully filled "\r
-"layers on which the model is printed."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:250\r
-#, fuzzy\r
-msgid "Surface layer thickness (mm)"\r
-msgstr "初始层厚 (mm)"\r
-\r
-#: Cura/util/profile.py:250\r
-msgid "Thickness of each surface layer."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:251\r
-#, fuzzy\r
-msgid "Surface layer line width (mm)"\r
-msgstr "接触层走线宽度 (mm)"\r
-\r
-#: Cura/util/profile.py:251\r
-msgid "Width of the lines for each surface layer."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
-msgid "Fix horrible"\r
-msgstr "缺陷修复"\r
-\r
-#: Cura/util/profile.py:252\r
-msgid "Combine everything (Type-A)"\r
-msgstr "闭合面片(Type-A)"\r
-\r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
-msgid ""\r
-"This expert option adds all parts of the model together. The result is "\r
-"usually that internal cavities disappear. Depending on the model this can be "\r
-"intended or not. Enabling this option is at your own risk. Type-A is "\r
-"dependent on the model normals and tries to keep some internal holes intact. "\r
-"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:253\r
-msgid "Combine everything (Type-B)"\r
-msgstr "闭合面片(Type-B)"\r
-\r
-#: Cura/util/profile.py:254\r
-msgid "Keep open faces"\r
-msgstr "保持开放面"\r
-\r
-#: Cura/util/profile.py:254\r
-msgid ""\r
-"This expert option keeps all the open bits of the model intact. Normally "\r
-"Cura tries to stitch up small holes and remove everything with big holes, "\r
-"but this option keeps bits that are not properly part of anything and just "\r
-"goes with whatever is left. This option is usually not what you want, but it "\r
-"might enable you to slice models otherwise failing to produce proper paths.\n"\r
-"As with all \"Fix horrible\" options, results may vary and use at your own "\r
-"risk."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:255\r
-msgid "Extensive stitching"\r
-msgstr "泛拼接"\r
-\r
-#: Cura/util/profile.py:255\r
-msgid ""\r
-"Extensive stitching tries to fix up open holes in the model by closing the "\r
-"hole with touching polygons. This algorthm is quite expensive and could "\r
-"introduce a lot of processing time.\n"\r
-"As with all \"Fix horrible\" options, results may vary and use at your own "\r
-"risk."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:481\r
-msgid "Save profile on slice"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:481\r
-msgid ""\r
-"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:482\r
-msgid "Cost (price/kg)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:482\r
-msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:483\r
-msgid "Cost (price/m)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:483\r
-msgid ""\r
-"Cost of your filament per meter, to estimate the cost of the final print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:484\r
-msgid "Auto detect SD card drive"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:484\r
-msgid ""\r
-"Auto detect the SD card. You can disable this because on some systems "\r
-"external hard-drives or USB sticks are detected as SD card."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:485\r
-msgid "Check for updates"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:485\r
-msgid "Check for newer versions of Cura on startup"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:486\r
-msgid "Send usage statistics"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:486\r
-msgid "Submit anonymous usage information to improve future versions of Cura"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:488\r
-msgid "Density (kg/m3)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:488\r
-msgid ""\r
-"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
-"This value is used to estimate the weight if the filament used for the print."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:489\r
-msgid ""\r
-"Change the language in which Cura runs. Switching language requires a "\r
-"restart of Cura"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:492\r
-msgid "Model colour"\r
-msgstr "模型颜色"\r
-\r
-#: Cura/util/profile.py:492\r
-msgid "Display color for first extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:493\r
-msgid "Model colour (2)"\r
-msgstr "模型颜色(2)"\r
-\r
-#: Cura/util/profile.py:493\r
-msgid "Display color for second extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:494\r
-msgid "Model colour (3)"\r
-msgstr "模型颜色(3)"\r
-\r
-#: Cura/util/profile.py:494\r
-msgid "Display color for third extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:495\r
-msgid "Model colour (4)"\r
-msgstr "模型颜色(4)"\r
-\r
-#: Cura/util/profile.py:495\r
-msgid "Display color for forth extruder"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:496\r
-msgid "Printing window type"\r
-msgstr "打印窗口类型"\r
-\r
-#: Cura/util/profile.py:496\r
-msgid "Select the interface used for USB printing."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:508\r
-msgid "Maximum width (mm)"\r
-msgstr "最大宽度 (mm)"\r
-\r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
-msgid "Size of the machine in mm"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:509\r
-msgid "Maximum depth (mm)"\r
-msgstr "最大深度(mm)"\r
-\r
-#: Cura/util/profile.py:510\r
-msgid "Maximum height (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:511\r
-msgid "Machine center 0,0"\r
-msgstr "平台中心 0,0"\r
-\r
-#: Cura/util/profile.py:511\r
-msgid ""\r
-"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
-"left corner."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:512\r
-msgid "Build area shape"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:512\r
-msgid "The shape of machine build area."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:514\r
-msgid ""\r
-"If you have an heated bed, this enabled heated bed settings (requires "\r
-"restart)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:515\r
-msgid "GCode Flavor"\r
-msgstr "Gcode类型"\r
-\r
-#: Cura/util/profile.py:515\r
-msgid ""\r
-"Flavor of generated GCode.\n"\r
-"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
-"UltiGCode is a variation of the RepRap GCode which puts more settings in the "\r
-"machine instead of the slicer.\n"\r
-"MakerBot GCode has a few changes in the way GCode is generated, but still "\r
-"requires MakerWare to generate to X3G.\n"\r
-"BFB style generates RPM based code.\n"\r
-"Mach3 uses A,B,C instead of E for extruders."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:516\r
-msgid "Extruder count"\r
-msgstr "挤出机数量"\r
-\r
-#: Cura/util/profile.py:516\r
-msgid "Amount of extruders in your machine."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
-msgid "Offset X"\r
-msgstr "X补偿"\r
-\r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
-msgid "The offset of your secondary extruder compared to the primary."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
-msgid "Offset Y"\r
-msgstr "Y补偿"\r
-\r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
-msgid "The offset of your tertiary extruder compared to the primary."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
-msgid "The offset of your forth extruder compared to the primary."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:523\r
-msgid "E-Steps per 1mm filament"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:523\r
-msgid ""\r
-"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
-"ignored and the value in your firmware is used."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:524\r
-msgid "Serial port"\r
-msgstr "串口"\r
-\r
-#: Cura/util/profile.py:524\r
-msgid "Serial port to use for communication with the printer"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:526\r
-msgid "Baudrate"\r
-msgstr "波特率"\r
-\r
-#: Cura/util/profile.py:526\r
-msgid ""\r
-"Speed of the serial port communication\n"\r
-"Needs to match your firmware settings\n"\r
-"Common values are 250000, 115200, 57600"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:529\r
-msgid "Head size towards X min (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:529\r
-msgid ""\r
-"The head size when printing multiple objects, measured from the tip of the "\r
-"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
-"is on the left side."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:530\r
-msgid "Head size towards Y min (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
-msgid ""\r
-"The head size when printing multiple objects, measured from the tip of the "\r
-"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
-"is on the left side."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:531\r
-msgid "Head size towards X max (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:532\r
-msgid "Head size towards Y max (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:532\r
-msgid ""\r
-"The head size when printing multiple objects, measured from the tip of the "\r
-"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
-"is on the left side."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:533\r
-msgid "Printer gantry height (mm)"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:533\r
-msgid ""\r
-"The height of the gantry holding up the printer head. If an object is higher "\r
-"then this then you cannot print multiple objects one for one. 60mm for an "\r
-"Ultimaker."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:535\r
-#, python-format\r
-msgid "More flow than 150% is rare and usually not recommended."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:536\r
-#, python-format\r
-msgid "Less flow than 50% is rare and usually not recommended."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:537\r
-#, python-format\r
-msgid ""\r
-"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
-"are not recommended."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:539\r
-msgid ""\r
-"It is highly unlikely that your machine can achieve a printing speed above "\r
-"150mm/s"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
-msgid "Temperatures above 260C could damage your machine, be careful!"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
-msgid ""\r
-"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
-"1.75mm."\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:549\r
-msgid ""\r
-"It is highly unlikely that your machine can achieve a travel speed above "\r
-"300mm/s"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:550\r
-#, python-format\r
-msgid ""\r
-"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
-"results and is not recommended."\r
-msgstr ""\r
-\r
-#: Cura/util/sliceEngine.py:93\r
-#, python-format\r
-msgid "%d minutes"\r
-msgstr ""\r
-\r
-#: Cura/util/sliceEngine.py:95\r
-#, python-format\r
-msgid "%d hour %d minutes"\r
-msgstr ""\r
-\r
-#: Cura/util/sliceEngine.py:96\r
-#, python-format\r
-msgid "%d hours %d minutes"\r
-msgstr ""\r
-\r
-#: Cura/util/sliceEngine.py:101\r
-#, python-format\r
-msgid "%0.2f meter %0.0f gram"\r
-msgstr ""\r
-\r
-#~ msgid "Run first run wizard..."\r
-#~ msgstr "运行首次使用向导..."\r
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR David Braam
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-12-08 10:01+0100\n"
+"PO-Revision-Date: 2015-01-13 12:42+0800\n"
+"Last-Translator: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.7.3\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"Language: zh_CN\n"
+
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
+msgid "A new version of Cura is available, would you like to download?"
+msgstr ""
+
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
+msgid "New version available"
+msgstr ""
+
+#: Cura/gui/configWizard.py:231
+msgid "Add new machine wizard"
+msgstr "添加机型"
+
+#: Cura/gui/configWizard.py:233
+msgid "First time run wizard"
+msgstr "配置向导"
+
+#: Cura/gui/configWizard.py:234
+msgid "Welcome, and thanks for trying Cura!"
+msgstr ""
+
+#: Cura/gui/configWizard.py:236
+msgid "This wizard will help you in setting up Cura for your machine."
+msgstr "配置向导将协助你为你的机型配置Cura"
+
+#: Cura/gui/configWizard.py:239
+msgid "Select your language:"
+msgstr "设置你的机型"
+
+#: Cura/gui/configWizard.py:266
+msgid "Older models"
+msgstr "打开3D模型"
+
+#: Cura/gui/configWizard.py:283
+msgid "Printrbot Selection"
+msgstr ""
+
+#: Cura/gui/configWizard.py:285
+msgid "Select which Printrbot machine you have:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:323
+msgid "Other machine information"
+msgstr ""
+
+#: Cura/gui/configWizard.py:324
+msgid "The following pre-defined machine profiles are available"
+msgstr ""
+
+#: Cura/gui/configWizard.py:325
+msgid ""
+"Note that these profiles are not guaranteed to give good results,\n"
+"or work at all. Extra tweaks might be required.\n"
+"If you find issues with the predefined profiles,\n"
+"or want an extra profile.\n"
+"Please report it at the github issue tracker."
+msgstr ""
+
+#: Cura/gui/configWizard.py:336
+msgid "Custom..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:354
+msgid "Cura Ready!"
+msgstr ""
+
+#: Cura/gui/configWizard.py:355
+msgid "Cura is now ready to be used!"
+msgstr ""
+
+#: Cura/gui/configWizard.py:359
+msgid "Custom RepRap information"
+msgstr ""
+
+#: Cura/gui/configWizard.py:360
+msgid ""
+"RepRap machines can be vastly different, so here you can set your own "
+"settings."
+msgstr ""
+
+#: Cura/gui/configWizard.py:361
+msgid ""
+"Be sure to review the default profile before running it on your machine."
+msgstr ""
+
+#: Cura/gui/configWizard.py:362
+msgid ""
+"If you like a default profile for your machine added,\n"
+"then make an issue on github."
+msgstr ""
+
+#: Cura/gui/configWizard.py:364
+msgid "You will have to manually install Marlin or Sprinter firmware."
+msgstr ""
+
+#: Cura/gui/configWizard.py:366
+msgid "Machine name"
+msgstr "机型名称"
+
+#: Cura/gui/configWizard.py:367
+msgid "Machine width (mm)"
+msgstr "构建宽度"
+
+#: Cura/gui/configWizard.py:368
+msgid "Machine depth (mm)"
+msgstr "构建深度"
+
+#: Cura/gui/configWizard.py:369
+msgid "Machine height (mm)"
+msgstr "构建高度"
+
+#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183
+msgid "Nozzle size (mm)"
+msgstr "喷嘴孔径"
+
+#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514
+msgid "Heated bed"
+msgstr "热床"
+
+#: Cura/gui/configWizard.py:372
+msgid "Bed center is 0,0,0 (RoStock)"
+msgstr "平台中心为0,0,0"
+
+#: Cura/gui/configWizard.py:392
+msgid "Select your machine"
+msgstr "选择你的机型"
+
+#: Cura/gui/configWizard.py:393
+msgid "What kind of machine do you have:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:408
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"
+msgstr "其他机型"
+
+#: Cura/gui/configWizard.py:411
+msgid ""
+"The collection of anonymous usage information helps with the continued "
+"improvement of Cura."
+msgstr ""
+
+#: Cura/gui/configWizard.py:412
+msgid ""
+"This does NOT submit your models online nor gathers any privacy related "
+"information."
+msgstr ""
+
+#: Cura/gui/configWizard.py:413
+msgid "Submit anonymous usage information:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:414
+msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
+msgstr ""
+
+#: Cura/gui/configWizard.py:531
+msgid "Select upgraded parts you have"
+msgstr ""
+
+#: Cura/gui/configWizard.py:532
+msgid ""
+"To assist you in having better default settings for your Ultimaker\n"
+"Cura would like to know which upgrades you have in your machine."
+msgstr ""
+
+#: Cura/gui/configWizard.py:534
+msgid "Extruder drive upgrade"
+msgstr ""
+
+#: Cura/gui/configWizard.py:535
+msgid "Heated printer bed (kit)"
+msgstr ""
+
+#: Cura/gui/configWizard.py:536
+msgid "Heated printer bed (self built)"
+msgstr ""
+
+#: Cura/gui/configWizard.py:537
+msgid "Dual extrusion (experimental)"
+msgstr ""
+
+#: Cura/gui/configWizard.py:539
+msgid ""
+"If you have an Ultimaker bought after october 2012 you will have the\n"
+"Extruder drive upgrade. If you do not have this upgrade,\n"
+"it is highly recommended to improve reliability."
+msgstr ""
+
+#: Cura/gui/configWizard.py:540
+msgid ""
+"This upgrade can be bought from the Ultimaker webshop\n"
+"or found on thingiverse as thing:26094"
+msgstr ""
+
+#: Cura/gui/configWizard.py:562
+msgid "Upgrade Ultimaker Firmware"
+msgstr ""
+
+#: Cura/gui/configWizard.py:563
+msgid ""
+"Firmware is the piece of software running directly on your 3D printer.\n"
+"This firmware controls the step motors, regulates the temperature\n"
+"and ultimately makes your printer work."
+msgstr ""
+
+#: Cura/gui/configWizard.py:565
+msgid ""
+"The firmware shipping with new Ultimakers works, but upgrades\n"
+"have been made to make better prints, and make calibration easier."
+msgstr ""
+
+#: Cura/gui/configWizard.py:567
+msgid ""
+"Cura requires these new features and thus\n"
+"your firmware will most likely need to be upgraded.\n"
+"You will get the chance to do so now."
+msgstr ""
+
+#: Cura/gui/configWizard.py:573
+msgid "Do not upgrade to this firmware if:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:574
+msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
+msgstr ""
+
+#: Cura/gui/configWizard.py:575
+msgid "* Build your own heated bed"
+msgstr ""
+
+#: Cura/gui/configWizard.py:576
+msgid "* Have other changes in the firmware"
+msgstr ""
+
+#: Cura/gui/configWizard.py:596
+msgid "Ultimaker Checkup"
+msgstr ""
+
+#: Cura/gui/configWizard.py:610
+msgid ""
+"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
+"You can skip these if you know your machine is functional."
+msgstr ""
+
+#: Cura/gui/configWizard.py:611
+msgid "Run checks"
+msgstr "运行检测"
+
+#: Cura/gui/configWizard.py:611
+msgid "Skip checks"
+msgstr "跳过检测"
+
+#: Cura/gui/configWizard.py:615
+msgid "Communication:"
+msgstr "通信:"
+
+#: Cura/gui/configWizard.py:616
+msgid "Temperature:"
+msgstr "温度:"
+
+#: Cura/gui/configWizard.py:617
+msgid "Endstops:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:622
+msgid "Show error log"
+msgstr "显示错误日志"
+
+#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093
+#: Cura/gui/configWizard.py:1312
+msgid "Connecting to machine."
+msgstr "正在连接打印机"
+
+#: Cura/gui/configWizard.py:677
+msgid "Cooldown before temperature check."
+msgstr ""
+
+#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690
+msgid "Checking the heater and temperature sensor."
+msgstr ""
+
+#: Cura/gui/configWizard.py:701
+msgid "Please make sure none of the endstops are pressed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:714
+msgid "Temperature measurement FAILED!"
+msgstr ""
+
+#: Cura/gui/configWizard.py:719
+#, python-format
+msgid "Head temperature: %d"
+msgstr ""
+
+#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735
+#, python-format
+msgid "Communication State: %s"
+msgstr ""
+
+#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270
+#: Cura/gui/configWizard.py:1488
+msgid "Failed to establish connection with the printer."
+msgstr ""
+
+#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784
+msgid "Please press the left X endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:779
+msgid "Please press the right X endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:789
+msgid "Please press the front Y endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804
+msgid "Please press the top Z endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:799
+msgid "Please press the back Y endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824
+msgid "Checkup finished"
+msgstr ""
+
+#: Cura/gui/configWizard.py:818
+msgid "Please press the bottom Z endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862
+msgid "Ultimaker Calibration"
+msgstr ""
+
+#: Cura/gui/configWizard.py:867
+msgid "Calibrating the Steps Per E requires some manual actions."
+msgstr ""
+
+#: Cura/gui/configWizard.py:868
+msgid "First remove any filament from your machine."
+msgstr ""
+
+#: Cura/gui/configWizard.py:869
+msgid ""
+"Next put in your filament so the tip is aligned with the\n"
+"top of the extruder drive."
+msgstr ""
+
+#: Cura/gui/configWizard.py:870
+msgid "We'll push the filament 100mm"
+msgstr ""
+
+#: Cura/gui/configWizard.py:871
+msgid "Extrude 100mm filament"
+msgstr ""
+
+#: Cura/gui/configWizard.py:872
+msgid ""
+"Now measure the amount of extruded filament:\n"
+"(this can be more or less then 100mm)"
+msgstr ""
+
+#: Cura/gui/configWizard.py:873
+msgid "Save"
+msgstr "保存"
+
+#: Cura/gui/configWizard.py:874
+msgid "This results in the following steps per E:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:876
+msgid "You can repeat these steps to get better calibration."
+msgstr ""
+
+#: Cura/gui/configWizard.py:879
+msgid ""
+"If you still have filament in your printer which needs\n"
+"heat to remove, press the heat up button below:"
+msgstr ""
+
+#: Cura/gui/configWizard.py:880
+msgid "Heatup for filament removal"
+msgstr ""
+
+#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939
+msgid ""
+"Error: Failed to open serial port to machine\n"
+"If this keeps happening, try disconnecting and reconnecting the USB cable"
+msgstr ""
+
+#: Cura/gui/configWizard.py:979
+msgid "Ultimaker2"
+msgstr ""
+
+#: Cura/gui/configWizard.py:980
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."
+msgstr ""
+
+#: Cura/gui/configWizard.py:981
+msgid "Cura is now ready to be used with your Ultimaker2."
+msgstr ""
+
+#: Cura/gui/configWizard.py:986
+msgid "Lulzbot TAZ/Mini"
+msgstr ""
+
+#: Cura/gui/configWizard.py:987
+msgid "Cura is now ready to be used with your Lulzbot."
+msgstr ""
+
+#: Cura/gui/configWizard.py:992
+msgid "Configuration Wizard"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501
+msgid "Bed leveling wizard"
+msgstr "运行平台调平向导..."
+
+#: Cura/gui/configWizard.py:1055
+msgid "This wizard will help you in leveling your printer bed"
+msgstr "向导将协助你调平平台"
+
+#: Cura/gui/configWizard.py:1057
+msgid "It will do the following steps"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1058
+msgid "* Move the printer head to each corner"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1059
+msgid " and let you adjust the height of the bed to the nozzle"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1060
+msgid "* Print a line around the bed to check if it is level"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288
+msgid "Connect to printer"
+msgstr "正在连接打印机"
+
+#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294
+msgid "Resume"
+msgstr "恢复"
+
+#: Cura/gui/configWizard.py:1068
+msgid "Up 0.2mm"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1068
+msgid "Down 0.2mm"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1069
+msgid "Up 10mm"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1069
+msgid "Down 10mm"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1129
+msgid "Homing printer..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1139
+msgid "Moving head to back center..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1146
+msgid "Moving head to back left corner..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168
+msgid "Moving head to front right corner..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1161
+msgid "Moving head to back right corner..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1175
+msgid "Heating up printer..."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1182
+msgid "Printing a square on the printer bed at 0.3mm height."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1222
+msgid ""
+"Adjust the front left screw of your printer bed\n"
+"So the nozzle just hits the bed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1227
+msgid ""
+"Adjust the back screw of your printer bed\n"
+"So the nozzle just hits the bed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1229
+msgid ""
+"Adjust the back left screw of your printer bed\n"
+"So the nozzle just hits the bed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1233
+msgid ""
+"Adjust the back right screw of your printer bed\n"
+"So the nozzle just hits the bed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1237
+msgid ""
+"Adjust the front right screw of your printer bed\n"
+"So the nozzle just hits the bed."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1241
+#, python-format
+msgid "Heating up printer: %d/%d"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1243
+msgid ""
+"The printer is hot now. Please insert some PLA filament into the printer."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1252
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1264
+msgid ""
+"Calibration finished.\n"
+"The squares on the bed should slightly touch each other."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1285
+msgid ""
+"This wizard will help you in calibrating the printer head offsets of your "
+"dual extrusion machine"
+msgstr "向导将协助你，为你的机型配置Cura"
+
+#: Cura/gui/configWizard.py:1318
+msgid "Printing initial calibration cross"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1366
+msgid ""
+"Please measure the distance between the horizontal lines in millimeters."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1376
+msgid "Printing the fine calibration lines."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1431
+msgid ""
+"Which horizontal line number lays perfect on top of each other? Front most "
+"line is zero."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1442
+#, python-format
+msgid "Calibration finished. Offsets are: %s %s"
+msgstr ""
+
+#: Cura/gui/configWizard.py:1455
+msgid "Please load both extruders with PLA."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1464
+msgid "Homing printer and heating up both extruders."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1474
+msgid "Please measure the distance between the vertical lines in millimeters."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1481
+msgid ""
+"Which vertical line number lays perfect on top of each other? Leftmost line "
+"is zero."
+msgstr ""
+
+#: Cura/gui/configWizard.py:1530
+msgid "Head offset wizard"
+msgstr "运行喷头校正向导..."
+
+#: Cura/gui/expertConfig.py:27
+msgid "Expert config"
+msgstr "专业设置"
+
+#: Cura/gui/firmwareInstall.py:64
+msgid ""
+"I am sorry, but Cura does not ship with a default firmware for your machine "
+"configuration."
+msgstr ""
+
+#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69
+#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543
+msgid "Firmware update"
+msgstr "固件更新"
+
+#: Cura/gui/firmwareInstall.py:69
+msgid ""
+"Cura only supports firmware updates for ATMega2560 based hardware.\n"
+"So updating your RepRap with Cura might or might not work."
+msgstr ""
+"Cura仅支持基于ATmega2560的机型升级\n"
+"升级固件后也许大概有可能你的打印机无法正常工作"
+
+#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181
+msgid "OK"
+msgstr "确定"
+
+#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265
+msgid "Reading firmware..."
+msgstr "读取固件..."
+
+#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267
+msgid "Connecting to machine..."
+msgstr "连接到打印机..."
+
+#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271
+msgid ""
+"Please connect the printer to\n"
+"your computer with the USB cable."
+msgstr ""
+
+#: Cura/gui/firmwareInstall.py:123
+msgid ""
+"Failed to find machine for firmware upgrade\n"
+"Is your machine connected to the PC?"
+msgstr ""
+
+#: Cura/gui/firmwareInstall.py:130
+msgid ""
+"Failed to install firmware:\n"
+"This firmware is not compatible with this machine.\n"
+"Trying to install UMO firmware on an UM2 or UMO+?"
+msgstr ""
+
+#: Cura/gui/firmwareInstall.py:136
+msgid ""
+"Failed to install firmware:\n"
+"This firmware is not compatible with this machine.\n"
+"Trying to install UM2 or UMO+ firmware on an UMO?"
+msgstr ""
+
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293
+msgid "Uploading firmware..."
+msgstr "固件上传中..."
+
+#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296
+#, python-format
+msgid ""
+"Done!\n"
+"Installed firmware: %s"
+msgstr ""
+"完成!\n"
+"成功写入固件: %s"
+
+#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298
+msgid "Failed to write firmware.\n"
+msgstr "固件写入失败\n"
+
+#: Cura/gui/firmwareInstall.py:290
+msgid "Failed to connect to programmer.\n"
+msgstr "连接下载器失败\n"
+
+#: Cura/gui/mainWindow.py:72
+msgid "Load model file...\tCTRL+L"
+msgstr "读取模型文件...\tCTRL+L"
+
+#: Cura/gui/mainWindow.py:74
+msgid "Save model...\tCTRL+S"
+msgstr "保存模型...\tCTRL+S"
+
+#: Cura/gui/mainWindow.py:76
+msgid "Reload platform\tF5"
+msgstr "重新载入模型\tF5"
+
+#: Cura/gui/mainWindow.py:78
+msgid "Clear platform"
+msgstr "清除所有模型"
+
+#: Cura/gui/mainWindow.py:82
+msgid "Print...\tCTRL+P"
+msgstr "打印...\tCTRL+P"
+
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279
+msgid "Save GCode..."
+msgstr "保存GCode..."
+
+#: Cura/gui/mainWindow.py:86
+msgid "Show slice engine log..."
+msgstr "显示切片引擎记录..."
+
+#: Cura/gui/mainWindow.py:90
+msgid "Open Profile..."
+msgstr "打开配置文件..."
+
+#: Cura/gui/mainWindow.py:93
+msgid "Save Profile..."
+msgstr "保存配置文件..."
+
+#: Cura/gui/mainWindow.py:96
+msgid "Load Profile from GCode..."
+msgstr "从Gcode中读取配置文件..."
+
+#: Cura/gui/mainWindow.py:100
+msgid "Reset Profile to default"
+msgstr "恢复默认配置..."
+
+#: Cura/gui/mainWindow.py:105
+msgid "Preferences...\tCTRL+,"
+msgstr "偏好配置......\tCTRL+,"
+
+#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469
+msgid "Machine settings..."
+msgstr "机型设置..."
+
+#: Cura/gui/mainWindow.py:113
+msgid "Recent Model Files"
+msgstr "最近使用的模型文件"
+
+#: Cura/gui/mainWindow.py:120
+msgid "Recent Profile Files"
+msgstr "最近使用的配置文件"
+
+#: Cura/gui/mainWindow.py:126
+msgid "Quit"
+msgstr "退出"
+
+#: Cura/gui/mainWindow.py:128
+msgid "File"
+msgstr "文件"
+
+#: Cura/gui/mainWindow.py:136
+msgid "Minecraft map import..."
+msgstr "导入Minecraft地图..."
+
+#: Cura/gui/mainWindow.py:140
+msgid "PID Debugger..."
+msgstr "PID调试器..."
+
+#: Cura/gui/mainWindow.py:142
+msgid "Auto Firmware Update..."
+msgstr "固件自动更新..."
+
+#: Cura/gui/mainWindow.py:145
+msgid "Copy profile to clipboard"
+msgstr "复制配置到剪切板"
+
+#: Cura/gui/mainWindow.py:149
+msgid "Print all at once"
+msgstr "同时打印多个模型"
+
+#: Cura/gui/mainWindow.py:151
+msgid "Print one at a time"
+msgstr "逐个打印模型"
+
+#: Cura/gui/mainWindow.py:158
+msgid "Tools"
+msgstr "工具"
+
+#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183
+msgid "Machine"
+msgstr "机型"
+
+#: Cura/gui/mainWindow.py:167
+msgid "Switch to quickprint..."
+msgstr "切换到快速打印模式..."
+
+#: Cura/gui/mainWindow.py:171
+msgid "Switch to full settings..."
+msgstr "切换到完整配置模式..."
+
+#: Cura/gui/mainWindow.py:176
+msgid "Open expert settings...\tCTRL+E"
+msgstr "额外设置...\tCTRL+E"
+
+#: Cura/gui/mainWindow.py:180
+msgid "Run bed leveling wizard..."
+msgstr "运行平台调平向导..."
+
+#: Cura/gui/mainWindow.py:182
+msgid "Run head offset wizard..."
+msgstr "运行多喷头校正向导..."
+
+#: Cura/gui/mainWindow.py:185
+msgid "Expert"
+msgstr "专业设置"
+
+#: Cura/gui/mainWindow.py:188
+msgid "Online documentation..."
+msgstr "在线文档..."
+
+#: Cura/gui/mainWindow.py:190
+msgid "Report a problem..."
+msgstr "问题提交..."
+
+#: Cura/gui/mainWindow.py:192
+msgid "Check for update..."
+msgstr "检查更新..."
+
+#: Cura/gui/mainWindow.py:194
+msgid "Open YouMagine website..."
+msgstr "打开YouMagine网站..."
+
+#: Cura/gui/mainWindow.py:196
+msgid "About Cura..."
+msgstr "关于Cura..."
+
+#: Cura/gui/mainWindow.py:198
+msgid "Help"
+msgstr "帮助"
+
+#: Cura/gui/mainWindow.py:379
+msgid ""
+"For \"One at a time\" printing, you need to have entered the correct head "
+"size and gantry height in the machine settings"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:379
+msgid "One at a time warning"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:467
+msgid "Add new machine..."
+msgstr "添加机型..."
+
+#: Cura/gui/mainWindow.py:475
+msgid "Install default firmware..."
+msgstr "安装默认固件..."
+
+#: Cura/gui/mainWindow.py:478
+msgid "Install custom firmware..."
+msgstr "安装自定义固件..."
+
+#: Cura/gui/mainWindow.py:482
+msgid "Select profile file to load"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:494
+msgid "Select gcode file to load profile from"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:509
+msgid ""
+"No profile found in GCode file.\n"
+"This feature only works with GCode files made by Cura 12.07 or newer."
+msgstr ""
+
+#: Cura/gui/mainWindow.py:509
+msgid "Profile load error"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:513
+msgid "Select profile file to save"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:523
+msgid ""
+"This will reset all profile settings to defaults.\n"
+"Unless you have saved your current profile, all settings will be lost!\n"
+"Do you really want to reset?"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:523
+msgid "Profile reset"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:543
+msgid ""
+"Warning: Installing a custom firmware does not guarantee that you machine "
+"will function correctly, and could damage your machine."
+msgstr ""
+
+#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587
+msgid "Open firmware to upload"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:616
+msgid "You are running the latest version of Cura!"
+msgstr "你正在运行最新版本的的Cura!"
+
+#: Cura/gui/mainWindow.py:616
+msgid "Awesome!"
+msgstr ""
+
+#: Cura/gui/mainWindow.py:661
+msgid "Basic"
+msgstr "基本"
+
+#: Cura/gui/mainWindow.py:665
+msgid "Advanced"
+msgstr "高级"
+
+#: Cura/gui/mainWindow.py:671
+msgid "Plugins"
+msgstr "插件"
+
+#: Cura/gui/pluginPanel.py:31
+msgid "Plugins:"
+msgstr "插件:"
+
+#: Cura/gui/pluginPanel.py:35
+msgid "Open plugin location"
+msgstr "打开本地插件"
+
+#: Cura/gui/pluginPanel.py:36
+msgid "Enabled plugins"
+msgstr "开启插件"
+
+#: Cura/gui/pluginPanel.py:159
+msgid "You need to select a plugin before you can add anything."
+msgstr "在你添加其他之前你需要选择一个插件"
+
+#: Cura/gui/pluginPanel.py:159
+msgid "Error: no plugin selected"
+msgstr "错误：没有选中吃插件"
+
+#: Cura/gui/preferencesDialog.py:14
+msgid "Preferences"
+msgstr "偏好配置......\tCTRL+,"
+
+#: Cura/gui/preferencesDialog.py:28
+msgid "Print window"
+msgstr "打印窗口"
+
+#: Cura/gui/preferencesDialog.py:31
+msgid "Colours"
+msgstr "颜色"
+
+#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489
+msgid "Language"
+msgstr "语言"
+
+#: Cura/gui/preferencesDialog.py:40
+msgid "Filament settings"
+msgstr "材料设置"
+
+#: Cura/gui/preferencesDialog.py:50
+msgid "Cura settings"
+msgstr "Cura设置"
+
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84
+msgid "Machine settings"
+msgstr "机型设置"
+
+#: Cura/gui/preferencesDialog.py:95
+msgid "Printer head size"
+msgstr "打印头尺寸"
+
+#: Cura/gui/preferencesDialog.py:103
+#, python-format
+msgid "Extruder %d"
+msgstr "挤出机 %d"
+
+#: Cura/gui/preferencesDialog.py:107
+msgid "Communication settings"
+msgstr "通信设置"
+
+#: Cura/gui/preferencesDialog.py:119
+msgid "Ok"
+msgstr ""
+
+#: Cura/gui/preferencesDialog.py:123
+msgid "Add new machine"
+msgstr "添加机型"
+
+#: Cura/gui/preferencesDialog.py:127
+msgid "Remove machine"
+msgstr "移除机型"
+
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167
+msgid "Change machine name"
+msgstr "更改机型名称"
+
+#: Cura/gui/preferencesDialog.py:153
+msgid "Cannot remove the last machine configuration in Cura"
+msgstr "Cura中不能移除最后的机型配置"
+
+#: Cura/gui/preferencesDialog.py:153
+msgid "Machine remove error"
+msgstr "机型移除错误"
+
+#: Cura/gui/preferencesDialog.py:167
+msgid "Enter the new name:"
+msgstr "输入新的名称:"
+
+#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
+#, python-format
+msgid "Printing on %s"
+msgstr "%s 正在打印"
+
+#: Cura/gui/printWindow.py:324
+msgid ""
+"Your computer is running on battery power.\n"
+"Connect your computer to AC power or your print might not finish."
+msgstr ""
+"你的电脑正在使用电池\n"
+"连接电源,否则可能你的打印无法完成"
+
+#: Cura/gui/printWindow.py:334
+msgid ""
+"InfoLine from printer connection\n"
+"InfoLine from dialog\n"
+"Extra line\n"
+"More lines for layout\n"
+"More lines for layout\n"
+"More lines for layout"
+msgstr ""
+
+#: Cura/gui/printWindow.py:336
+msgid "Connect"
+msgstr "连接"
+
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
+msgid "Print"
+msgstr "打印"
+
+#: Cura/gui/printWindow.py:339
+msgid "Pause"
+msgstr "暂停"
+
+#: Cura/gui/printWindow.py:340
+msgid "Cancel print"
+msgstr "取消打印"
+
+#: Cura/gui/printWindow.py:341
+msgid "Error log"
+msgstr "取消打印"
+
+#: Cura/gui/sceneView.py:64
+msgid "Load"
+msgstr ""
+
+#: Cura/gui/sceneView.py:69
+msgid "Rotate"
+msgstr ""
+
+#: Cura/gui/sceneView.py:70
+msgid "Scale"
+msgstr ""
+
+#: Cura/gui/sceneView.py:71
+msgid "Mirror"
+msgstr ""
+
+#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
+msgid "Reset"
+msgstr ""
+
+#: Cura/gui/sceneView.py:74
+msgid "Lay flat"
+msgstr ""
+
+#: Cura/gui/sceneView.py:77
+msgid "To max"
+msgstr ""
+
+#: Cura/gui/sceneView.py:79
+msgid "Mirror X"
+msgstr ""
+
+#: Cura/gui/sceneView.py:80
+msgid "Mirror Y"
+msgstr ""
+
+#: Cura/gui/sceneView.py:81
+msgid "Mirror Z"
+msgstr ""
+
+#: Cura/gui/sceneView.py:89
+msgid "Scale X"
+msgstr ""
+
+#: Cura/gui/sceneView.py:91
+msgid "Scale Y"
+msgstr ""
+
+#: Cura/gui/sceneView.py:93
+msgid "Scale Z"
+msgstr ""
+
+#: Cura/gui/sceneView.py:95
+msgid "Size X (mm)"
+msgstr ""
+
+#: Cura/gui/sceneView.py:97
+msgid "Size Y (mm)"
+msgstr ""
+
+#: Cura/gui/sceneView.py:99
+msgid "Size Z (mm)"
+msgstr ""
+
+#: Cura/gui/sceneView.py:101
+msgid "Uniform scale"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "View mode"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "Normal"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "Overhang"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "Transparent"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "X-Ray"
+msgstr ""
+
+#: Cura/gui/sceneView.py:104
+msgid "Layers"
+msgstr ""
+
+#: Cura/gui/sceneView.py:106
+msgid "Share on YouMagine"
+msgstr ""
+
+#: Cura/gui/sceneView.py:204
+msgid "Open 3D model"
+msgstr "打开3D模型"
+
+#: Cura/gui/sceneView.py:229
+msgid "Save 3D model"
+msgstr "保存3D模型"
+
+#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915
+#, python-format
+msgid "Print with %s"
+msgstr ""
+
+#: Cura/gui/sceneView.py:280
+msgid "Slice engine log..."
+msgstr ""
+
+#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918
+msgid "Save toolpath"
+msgstr ""
+
+#: Cura/gui/sceneView.py:352
+msgid "The slicing engine reported the following"
+msgstr ""
+
+#: Cura/gui/sceneView.py:352
+msgid "Engine log..."
+msgstr "引擎记录..."
+
+#: Cura/gui/sceneView.py:491
+msgid "How many copies do you want?"
+msgstr ""
+
+#: Cura/gui/sceneView.py:491
+msgid "Number of copies"
+msgstr ""
+
+#: Cura/gui/sceneView.py:491
+msgid "Multiply"
+msgstr ""
+
+#: Cura/gui/sceneView.py:781
+msgid "Center on platform"
+msgstr ""
+
+#: Cura/gui/sceneView.py:782
+msgid "Delete object"
+msgstr ""
+
+#: Cura/gui/sceneView.py:783
+msgid "Multiply object"
+msgstr ""
+
+#: Cura/gui/sceneView.py:784
+msgid "Split object into parts"
+msgstr ""
+
+#: Cura/gui/sceneView.py:786
+msgid "Dual extrusion merge"
+msgstr ""
+
+#: Cura/gui/sceneView.py:788
+msgid "Delete all objects"
+msgstr ""
+
+#: Cura/gui/sceneView.py:789
+msgid "Reload all objects"
+msgstr ""
+
+#: Cura/gui/sceneView.py:912
+msgid "Toolpath to SD"
+msgstr ""
+
+#: Cura/gui/sceneView.py:1206
+msgid "Overhang view not working due to lack of OpenGL shaders support."
+msgstr ""
+
+#: Cura/gui/simpleMode.py:19
+msgid "High quality print"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:20
+msgid "Normal quality print"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:21
+msgid "Fast low quality print"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:22
+msgid "Thin walled cup or vase"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:32
+msgid "Print support structure"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:37
+msgid "Select a quickprint profile:"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:47
+msgid "Material:"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:51
+msgid "Diameter:"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:57
+msgid "Other:"
+msgstr ""
+
+#: Cura/gui/simpleMode.py:85
+msgid "Exterior Only"
+msgstr ""
+
+#: Cura/gui/tools/imageToMesh.py:28
+msgid "Height (mm)"
+msgstr ""
+
+#: Cura/gui/tools/imageToMesh.py:32
+msgid "Base (mm)"
+msgstr ""
+
+#: Cura/gui/tools/imageToMesh.py:36
+msgid "Width (mm)"
+msgstr ""
+
+#: Cura/gui/tools/imageToMesh.py:40
+msgid "Depth (mm)"
+msgstr ""
+
+#: Cura/gui/tools/projector.py:42
+msgid "Edit"
+msgstr "编辑"
+
+#: Cura/gui/tools/projector.py:43
+msgid "Rectangle"
+msgstr ""
+
+#: Cura/gui/tools/projector.py:44
+msgid "Circle"
+msgstr ""
+
+#: Cura/gui/tools/projector.py:45
+msgid "Draw curves"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:78
+msgid "Checking token"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:82
+msgid "Failed to contact YouMagine.com"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
+#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
+msgid "YouMagine error."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:100
+msgid "Cura is now authorized to share on YouMagine"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:100
+msgid "YouMagine."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:112
+msgid "Creating new design on YouMagine..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:116
+msgid "Failed to create a design, nothing uploaded!"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:120
+#, python-format
+msgid "Building model %s..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:131
+#, python-format
+msgid "Uploading model %s..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
+#: Cura/gui/tools/youmagineGui.py:148
+#, python-format
+msgid "Failed to upload %s!"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:137
+#, python-format
+msgid "Uploading file %s..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:145
+#, python-format
+msgid "Uploading image %s..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:153
+msgid "Failed to upload snapshot!"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:158
+msgid "Publishing design..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:230
+msgid "Request authorization from YouMagine"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:231
+msgid "Paste token here"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:237
+msgid ""
+"To share your designs on YouMagine\n"
+"you need an account on YouMagine.com\n"
+"and authorize Cura to access your account."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:239
+msgid ""
+"This will open a browser window where you can\n"
+"authorize Cura to access your YouMagine account.\n"
+"You can revoke access at any time\n"
+"from YouMagine.com"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:274
+msgid "Design name"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:278
+msgid "Publish after upload"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:279
+msgid "Share!"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:287
+msgid "Add..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:289
+msgid "Webcam..."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:299
+msgid ""
+"Directly publish the design after uploading.\n"
+"Without this check the design will not be public\n"
+"until you publish it yourself on YouMagine.com"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:305
+msgid "Design name:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:307
+msgid "Description:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:309
+msgid "Category:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:311
+msgid "License:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:314
+msgid "Images:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:317
+msgid "Related design files:"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:340
+msgid "The name cannot be empty"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
+msgid "New design error."
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:344
+msgid "The description cannot be empty"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:370
+msgid "No webcam found on your system"
+msgstr ""
+
+#: Cura/gui/tools/youmagineGui.py:370
+msgid "Webcam error"
+msgstr ""
+
+#: Cura/gui/util/engineResultView.py:168
+#, python-format
+msgid "Loading toolpath for visualization (%d%%)"
+msgstr ""
+
+#: Cura/gui/util/openglGui.py:242
+msgid "An error has occurred during the 3D view drawing."
+msgstr ""
+
+#: Cura/gui/util/openglGui.py:250
+msgid "3D window error"
+msgstr ""
+
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180
+#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210
+#: Cura/util/profile.py:212
+msgid "Quality"
+msgstr "打印质量"
+
+#: Cura/util/profile.py:178
+msgid "Layer height (mm)"
+msgstr "层厚(mm)"
+
+#: Cura/util/profile.py:178
+msgid ""
+"Layer height in millimeters.\n"
+"This is the most important setting to determine the quality of your print. "
+"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
+"0.25mm with an Ultimaker for very fast prints at low quality."
+msgstr ""
+"每层的厚度\n"
+"这是最影响打印质量的设置\n"
+"普通质量可设置为0.2mm，高质量设为0.1mm。\n"
+"降低打印质量可以提升打印速度"
+
+#: Cura/util/profile.py:179
+msgid "Shell thickness (mm)"
+msgstr "壁厚(mm)"
+
+#: Cura/util/profile.py:179
+msgid ""
+"Thickness of the outside shell in the horizontal direction.\n"
+"This is used in combination with the nozzle size to define the number\n"
+"of perimeter lines and the thickness of those perimeter lines."
+msgstr ""
+"水平方向的边缘厚度\n"
+"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"
+
+#: Cura/util/profile.py:180
+msgid "Enable retraction"
+msgstr "开启回退"
+
+#: Cura/util/profile.py:180
+msgid ""
+"Retract the filament when the nozzle is moving over a none-printed area. "
+"Details about the retraction can be configured in the advanced tab."
+msgstr ""
+"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"
+"在高级设置面板中有更多相关设置"
+
+#: Cura/util/profile.py:181 Cura/util/profile.py:182
+msgid "Fill"
+msgstr "填充"
+
+#: Cura/util/profile.py:181
+msgid "Bottom/Top thickness (mm)"
+msgstr "底层/顶层厚度(mm)"
+
+#: Cura/util/profile.py:181
+msgid ""
+"This controls the thickness of the bottom and top layers, the amount of "
+"solid layers put down is calculated by the layer thickness and this value.\n"
+"Having this value a multiple of the layer thickness makes sense. And keep it "
+"near your wall thickness to make an evenly strong part."
+msgstr ""
+"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"
+"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"
+
+#: Cura/util/profile.py:182
+msgid "Fill Density (%)"
+msgstr "填充密度(%)"
+
+#: Cura/util/profile.py:182
+msgid ""
+"This controls how densely filled the insides of your print will be. For a "
+"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
+"enough.\n"
+"This won't affect the outside of the print and only adjusts how strong the "
+"part becomes."
+msgstr ""
+"控制填充密度\n"
+"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"
+"这个参数不会影响物体的外观，它一般用来调整物体的强度"
+
+#: Cura/util/profile.py:183
+msgid ""
+"The nozzle size is very important, this is used to calculate the line width "
+"of the infill, and used to calculate the amount of outside wall lines and "
+"thickness for the wall thickness you entered in the print settings."
+msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
+
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189
+msgid "Speed and Temperature"
+msgstr "速度和温度"
+
+#: Cura/util/profile.py:184
+msgid "Print speed (mm/s)"
+msgstr "打印速度(mm/s)"
+
+#: Cura/util/profile.py:184
+msgid ""
+"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
+"s, but for good quality prints you want to print slower. Printing speed "
+"depends on a lot of factors. So you will be experimenting with optimal "
+"settings for this."
+msgstr ""
+"打印速度\n"
+"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"
+"80mm/s以下\n"
+"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"
+
+#: Cura/util/profile.py:185
+msgid "Printing temperature (C)"
+msgstr "打印温度(C)"
+
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
+#: Cura/util/profile.py:188
+msgid ""
+"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
+"For PLA a value of 210C is usually used.\n"
+"For ABS a value of 230C or higher is required."
+msgstr ""
+"打印时的喷头温度\n"
+"PLA通常设置为210C\n"
+"ABS通常设置为230C"
+
+#: Cura/util/profile.py:186
+msgid "2nd nozzle temperature (C)"
+msgstr "第二打印头温度 (C)"
+
+#: Cura/util/profile.py:187
+msgid "3th nozzle temperature (C)"
+msgstr "第三打印头温度 (C)"
+
+#: Cura/util/profile.py:188
+msgid "4th nozzle temperature (C)"
+msgstr "第四打印头温度 (C)"
+
+#: Cura/util/profile.py:189
+msgid "Bed temperature (C)"
+msgstr "热床温度"
+
+#: Cura/util/profile.py:189
+msgid ""
+"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
+msgstr "打印时热床的温度,自己预加热请设置成0"
+
+#: Cura/util/profile.py:190 Cura/util/profile.py:191
+msgid "None"
+msgstr ""
+
+#: Cura/util/profile.py:190
+msgid "Touching buildplate"
+msgstr ""
+
+#: Cura/util/profile.py:190
+msgid "Everywhere"
+msgstr ""
+
+#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192
+#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234
+#: Cura/util/profile.py:235 Cura/util/profile.py:236
+msgid "Support"
+msgstr "支撑"
+
+#: Cura/util/profile.py:190
+msgid "Support type"
+msgstr "支撑类型"
+
+#: Cura/util/profile.py:190
+msgid ""
+"Type of support structure build.\n"
+"\"Touching buildplate\" is the most commonly used support setting.\n"
+"\n"
+"None does not do any support.\n"
+"Touching buildplate only creates support where the support structure will "
+"touch the build platform.\n"
+"Everywhere creates support even on top of parts of the model."
+msgstr ""
+"支撑结构类型。\n"
+"通常使用\"Touching buildplate\"建立支撑 \n"
+"\n"
+"选择 None 不会建立支撑\n"
+
+#: Cura/util/profile.py:191 Cura/util/profile.py:240
+msgid "Brim"
+msgstr ""
+
+#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242
+#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251
+msgid "Raft"
+msgstr ""
+
+#: Cura/util/profile.py:191
+msgid "Platform adhesion type"
+msgstr "粘附平台"
+
+#: Cura/util/profile.py:191
+msgid ""
+"Different options that help in preventing corners from lifting due to "
+"warping.\n"
+"Brim adds a single layer thick flat area around your object which is easy to "
+"cut off afterwards, and it is the recommended option.\n"
+"Raft adds a thick raster below the object and a thin interface between this "
+"and your object.\n"
+"(Note that enabling the brim or raft disables the skirt)"
+msgstr ""
+"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
+"Raft会打印模型前打印一个网状底座\n"
+
+#: Cura/util/profile.py:192
+msgid "Both"
+msgstr ""
+
+#: Cura/util/profile.py:192
+msgid "First extruder"
+msgstr ""
+
+#: Cura/util/profile.py:192
+msgid "Second extruder"
+msgstr ""
+
+#: Cura/util/profile.py:192
+msgid "Support dual extrusion"
+msgstr "双头打印中的支撑"
+
+#: Cura/util/profile.py:192
+msgid ""
+"Which extruder to use for support material, for break-away support you can "
+"use both extruders.\n"
+"But if one of the materials is more expensive then the other you could "
+"select an extruder to use for support material. This causes more extruder "
+"switches.\n"
+"You can also use the 2nd extruder for soluble support materials."
+msgstr ""
+"哪个喷嘴用来打印支撑，对于直接剥离的，任意喷嘴都可以\n"
+"但是如果某个材料比较贵重,你可以选择另外一个用来用作支撑,这会导致更多的喷头切"
+"换\n"
+"你还可以用第二喷嘴来打印水溶性支撑\n"
+"\"Both\"为两者\n"
+"\"First extruder\"为第一个喷嘴（一般为右侧的那个）\n"
+"\"Second extruder\"为第二个喷嘴"
+
+#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
+msgid "Dual extrusion"
+msgstr "双喷头"
+
+#: Cura/util/profile.py:193
+msgid "Wipe&prime tower"
+msgstr "残料擦除塔"
+
+#: Cura/util/profile.py:193
+msgid ""
+"The wipe-tower is a tower printed on every layer when switching between "
+"nozzles.\n"
+"The old nozzle is wiped off on the tower before the new nozzle is used to "
+"print the 2nd color."
+msgstr ""
+"残料擦除塔是用在每层打印头切换的时候打印的\n"
+"用来在当前喷嘴打印前擦除前一个喷嘴的料"
+
+#: Cura/util/profile.py:194
+msgid "Wipe&prime tower volume per layer (mm3)"
+msgstr "每层擦除塔体积(mm3)"
+
+#: Cura/util/profile.py:194
+msgid ""
+"The amount of material put in the wipe/prime tower.\n"
+"This is done in volume because in general you want to extrude a\n"
+"certain amount of volume to get the extruder going, independent on the layer "
+"height.\n"
+"This means that with thinner layers, your tower gets bigger."
+msgstr ""
+"用于擦除塔上的材料的数量.\n"
+"用体积,是因为一般你要挤出一定的量,\n"
+"来让挤出机继续工作,而有独立于层高\n"
+"这意味着,更薄的层,你的塔变大"
+
+#: Cura/util/profile.py:195
+msgid "Ooze shield"
+msgstr "溢出保护"
+
+#: Cura/util/profile.py:195
+msgid ""
+"The ooze shield is a 1 line thick shell around the object which stands a few "
+"mm from the object.\n"
+"This shield catches any oozing from the unused nozzle in dual-extrusion."
+msgstr ""
+"溢出保护是一条几毫米的厚壁\n"
+"这个壁在双喷头打印的时候抓去那些无用的漏液"
+
+#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
+#: Cura/util/profile.py:199 Cura/util/profile.py:200
+msgid "Filament"
+msgstr "打印材料"
+
+#: Cura/util/profile.py:196
+msgid "Diameter (mm)"
+msgstr "直径(mm)"
+
+#: Cura/util/profile.py:196
+msgid ""
+"Diameter of your filament, as accurately as possible.\n"
+"If you cannot measure this value you will have to calibrate it, a higher "
+"number means less extrusion, a smaller number generates more extrusion."
+msgstr ""
+"耗材的直径,请尽量精确\n"
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
+"更\n"
+"高的数值会有更少的料挤出"
+
+#: Cura/util/profile.py:197
+msgid "Diameter2 (mm)"
+msgstr "线材直径2 (mm)"
+
+#: Cura/util/profile.py:197
+msgid ""
+"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
+"as for nozzle 1."
+msgstr ""
+"2号打印头的耗材的直径,请尽量精确\n"
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
+"更\n"
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
+
+#: Cura/util/profile.py:198
+msgid "Diameter3 (mm)"
+msgstr "线材直径3 (mm)"
+
+#: Cura/util/profile.py:198
+msgid ""
+"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
+"as for nozzle 1."
+msgstr ""
+"3号打印头的耗材的直径,请尽量精确\n"
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
+"更\n"
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
+
+#: Cura/util/profile.py:199
+msgid "Diameter4 (mm)"
+msgstr "线材直径4 (mm)"
+
+#: Cura/util/profile.py:199
+msgid ""
+"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
+"as for nozzle 1."
+msgstr ""
+"4号打印头的耗材的直径,请尽量精确\n"
+"如果你不能确定这个数值,那么你可能需要一些调校,更低的数值会有更多的料挤出,而"
+"更\n"
+"高的数值会有更少的料挤出如果和1号打印头一样,请设置成0"
+
+#: Cura/util/profile.py:200
+msgid "Flow (%)"
+msgstr "流量(%)"
+
+#: Cura/util/profile.py:200
+msgid ""
+"Flow compensation, the amount of material extruded is multiplied by this "
+"value"
+msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"
+
+#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203
+#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206
+#: Cura/util/profile.py:207
+msgid "Retraction"
+msgstr "回退"
+
+#: Cura/util/profile.py:201
+msgid "Speed (mm/s)"
+msgstr "回退速度(mm/s)"
+
+#: Cura/util/profile.py:201
+msgid ""
+"Speed at which the filament is retracted, a higher retraction speed works "
+"better. But a very high retraction speed can lead to filament grinding."
+msgstr ""
+"回退丝时的速度\n"
+"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
+
+#: Cura/util/profile.py:202
+msgid "Distance (mm)"
+msgstr "回退长度(mm)"
+
+#: Cura/util/profile.py:202
+msgid ""
+"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
+"seems to generate good results."
+msgstr ""
+"丝回退的长度\n"
+"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"
+
+#: Cura/util/profile.py:203
+msgid "Dual extrusion switch amount (mm)"
+msgstr "双喷头切换回退量 (mm)"
+
+#: Cura/util/profile.py:203
+msgid ""
+"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
+"no retraction at all. A value of 16.0mm seems to generate good results."
+msgstr "回抽的数量,0为不使用回抽,一般2mm会有比较好的效果"
+
+#: Cura/util/profile.py:204
+msgid "Minimum travel (mm)"
+msgstr "最小移动距离(mm)"
+
+#: Cura/util/profile.py:204
+msgid ""
+"Minimum amount of travel needed for a retraction to happen at all. To make "
+"sure you do not get a lot of retractions in a small area."
+msgstr "回抽使用的最小的移动间隔,用来防止在一个很小的范围内不停的使用回抽"
+
+#: Cura/util/profile.py:205
+msgid "Enable combing"
+msgstr "启用梳理"
+
+#: Cura/util/profile.py:205
+msgid ""
+"Combing is the act of avoiding holes in the print for the head to travel "
+"over. If combing is disabled the printer head moves straight from the start "
+"point to the end point and it will always retract."
+msgstr ""
+"梳理功能可以避免喷头移动后产生的孔\n"
+"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"
+
+#: Cura/util/profile.py:206
+msgid "Minimal extrusion before retracting (mm)"
+msgstr "回退前最小挤出量(mm)"
+
+#: Cura/util/profile.py:206
+msgid ""
+"The minimal amount of extrusion that needs to be done before retracting "
+"again if a retraction needs to happen before this minimal is reached the "
+"retraction is ignored.\n"
+"This avoids retracting a lot on the same piece of filament which flattens "
+"the filament and causes grinding issues."
+msgstr ""
+"最小挤出量一般使用在回抽需要反复发生的时候\n"
+"它可以避免那些频繁回抽导致的耗材挖坑现象"
+
+#: Cura/util/profile.py:207
+msgid "Z hop when retracting (mm)"
+msgstr "回退时Z轴抬起(mm)"
+
+#: Cura/util/profile.py:207
+msgid ""
+"When a retraction is done, the head is lifted by this amount to travel over "
+"the print. A value of 0.075 works well. This feature has a lot of positive "
+"effect on delta towers."
+msgstr ""
+"当回退完成,移动的时候打印头会升起一定高度,0.075工作起来比较不错.此功能对打"
+"印\n"
+"塔类物品有宜."
+
+#: Cura/util/profile.py:208
+msgid "Initial layer thickness (mm)"
+msgstr "初始层厚 (mm)"
+
+#: Cura/util/profile.py:208
+msgid ""
+"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
+"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
+"the other layers."
+msgstr ""
+"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
+"始层厚度"
+
+#: Cura/util/profile.py:209
+msgid "Initial layer line width (%)"
+msgstr "初始层线宽(%)"
+
+#: Cura/util/profile.py:209
+msgid ""
+"Extra width factor for the extrusion on the first layer, on some printers "
+"it's good to have wider extrusion on the first layer to get better bed "
+"adhesion."
+msgstr ""
+"下沉模型\n"
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
+"数，切除一部分模型再打印"
+
+#: Cura/util/profile.py:210
+msgid "Cut off object bottom (mm)"
+msgstr "底层切除(mm)"
+
+#: Cura/util/profile.py:210
+msgid ""
+"Sinks the object into the platform, this can be used for objects that do not "
+"have a flat bottom and thus create a too small first layer."
+msgstr ""
+"下沉模型\n"
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
+"数，切除一部分模型再打印"
+
+#: Cura/util/profile.py:212
+msgid "Dual extrusion overlap (mm)"
+msgstr "两次挤出重叠(mm)"
+
+#: Cura/util/profile.py:212
+msgid ""
+"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
+"bonds the different colors together."
+msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
+
+#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
+#: Cura/util/profile.py:216 Cura/util/profile.py:217
+msgid "Speed"
+msgstr "速度"
+
+#: Cura/util/profile.py:213
+msgid "Travel speed (mm/s)"
+msgstr "移动速度 (mm/s)"
+
+#: Cura/util/profile.py:213
+msgid ""
+"Speed at which travel moves are done, a well built Ultimaker can reach "
+"speeds of 250mm/s. But some machines might miss steps then."
+msgstr ""
+"移动喷头时的速度\n"
+"此移动速度指非打印状态下的移动速度\n"
+"建议不要超过150mm/s,否则可能造成电机丢步"
+
+#: Cura/util/profile.py:214
+msgid "Bottom layer speed (mm/s)"
+msgstr "底层速度 (mm/s)"
+
+#: Cura/util/profile.py:214
+msgid ""
+"Print speed for the bottom layer, you want to print the first layer slower "
+"so it sticks better to the printer bed."
+msgstr ""
+"打印底层的速度\n"
+"这个值通常会设置的很低，这样能使底层和平台粘附的更好"
+
+#: Cura/util/profile.py:215
+msgid "Infill speed (mm/s)"
+msgstr "填充速度 (mm/s)"
+
+#: Cura/util/profile.py:215
+msgid ""
+"Speed at which infill parts are printed. If set to 0 then the print speed is "
+"used for the infill. Printing the infill faster can greatly reduce printing "
+"time, but this can negatively affect print quality."
+msgstr ""
+"打印内部填充时的速度\n"
+"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"
+"可能会对打印质量照成一定消极影响"
+
+#: Cura/util/profile.py:216
+msgid "Outer shell speed (mm/s)"
+msgstr "外壳速度 (mm/s)"
+
+#: Cura/util/profile.py:216
+msgid ""
+"Speed at which outer shell is printed. If set to 0 then the print speed is "
+"used. Printing the outer shell at a lower speed improves the final skin "
+"quality. However, having a large difference between the inner shell speed "
+"and the outer shell speed will effect quality in a negative way."
+msgstr ""
+"打印机外壳时的速度\n"
+"当设置为0时，会使用打印速度作为外壳速度\n"
+"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"
+"大，可能会对打印质量有一些消极影响"
+
+#: Cura/util/profile.py:217
+msgid "Inner shell speed (mm/s)"
+msgstr "内壁速度 (mm/s)"
+
+#: Cura/util/profile.py:217
+msgid ""
+"Speed at which inner shells are printed. If set to 0 then the print speed is "
+"used. Printing the inner shell faster then the outer shell will reduce "
+"printing time. It is good to set this somewhere in between the outer shell "
+"speed and the infill/printing speed."
+msgstr ""
+"打印内壁时的速度\n"
+"当设置为0时，会使用打印速度作为内壁速度\n"
+"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"
+"充速度之间的关系"
+
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224
+#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227
+#: Cura/util/profile.py:228
+msgid "Cool"
+msgstr "冷却"
+
+#: Cura/util/profile.py:218
+msgid "Minimal layer time (sec)"
+msgstr "每层最小打印时间(sec)"
+
+#: Cura/util/profile.py:218
+msgid ""
+"Minimum time spent in a layer, gives the layer time to cool down before the "
+"next layer is put on top. If the layer will be placed down too fast the "
+"printer will slow down to make sure it has spent at least this amount of "
+"seconds printing this layer."
+msgstr ""
+"打印每层至少要耗费的时间\n"
+"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"
+"适当降低速度，以保证有这个设定时间"
+
+#: Cura/util/profile.py:219
+msgid "Enable cooling fan"
+msgstr "开启风扇冷却"
+
+#: Cura/util/profile.py:219
+msgid ""
+"Enable the cooling fan during the print. The extra cooling from the cooling "
+"fan is essential during faster prints."
+msgstr ""
+"在打印期间开启风扇冷却\n"
+"在快速打印时开启风扇冷却是很有必要的"
+
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
+msgid "Skirt"
+msgstr "裙边"
+
+#: Cura/util/profile.py:221
+msgid "Line count"
+msgstr "线数"
+
+#: Cura/util/profile.py:221
+msgid ""
+"The skirt is a line drawn around the object at the first layer. This helps "
+"to prime your extruder, and to see if the object fits on your platform.\n"
+"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
+"priming your extruder better for small objects."
+msgstr ""
+"裙边是画在模型第一层外的一条线，可以帮助你准备好你的挤出机，同时可以看到模型"
+"是否适合于平台。\n"
+"设置为0将关掉裙边功能。多条群边可以帮助你的挤出机适用于打印小一点的模型。"
+
+#: Cura/util/profile.py:222
+msgid "Start distance (mm)"
+msgstr "开始距离(mm)"
+
+#: Cura/util/profile.py:222
+msgid ""
+"The distance between the skirt and the first layer.\n"
+"This is the minimal distance, multiple skirt lines will be put outwards from "
+"this distance."
+msgstr ""
+"群边与打印第一层的距离。\n"
+"这个是最小的距离。多条群边线将从这个距离向外扩。"
+
+#: Cura/util/profile.py:223
+msgid "Minimal length (mm)"
+msgstr "最小长度(mm)"
+
+#: Cura/util/profile.py:223
+msgid ""
+"The minimal length of the skirt, if this minimal length is not reached it "
+"will add more skirt lines to reach this minimal lenght.\n"
+"Note: If the line count is set to 0 this is ignored."
+msgstr ""
+"群边的最小长度，如果最小长度没有达到这个值，将自动添加更多群边线来达到这个最"
+"小长度。\n"
+"注意：如果线的数量被设置为0，这栏将被忽略。"
+
+#: Cura/util/profile.py:224
+msgid "Fan full on at height (mm)"
+msgstr "风扇全速开启高度(mm)"
+
+#: Cura/util/profile.py:224
+msgid ""
+"The height at which the fan is turned on completely. For the layers below "
+"this the fan speed is scaled linearly with the fan off at layer 0."
+msgstr "风扇全速开启的高度,在此之下速度将会被从0开始线性分配"
+
+#: Cura/util/profile.py:225
+msgid "Fan speed min (%)"
+msgstr "风扇最小速度(%)"
+
+#: Cura/util/profile.py:225
+msgid ""
+"When the fan is turned on, it is enabled at this speed setting. If cool "
+"slows down the layer, the fan is adjusted between the min and max speed. "
+"Minimal fan speed is used if the layer is not slowed down due to cooling."
+msgstr ""
+"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"
+"高\n"
+"速中调节,这个速度将在不需要冷却的层中使用."
+
+#: Cura/util/profile.py:226
+msgid "Fan speed max (%)"
+msgstr "风扇最大速度(%)"
+
+#: Cura/util/profile.py:226
+msgid ""
+"When the fan is turned on, it is enabled at this speed setting. If cool "
+"slows down the layer, the fan is adjusted between the min and max speed. "
+"Maximal fan speed is used if the layer is slowed down due to cooling by more "
+"than 200%."
+msgstr ""
+"当风扇打开的时候,它的起始速度为此设置.如果某层需要冷却,风扇速度将会在低速和"
+"高\n"
+"速中调节,这个速度将在那些需要200%冷却的层中使用."
+
+#: Cura/util/profile.py:227
+msgid "Minimum speed (mm/s)"
+msgstr "最小速度(mm/s)"
+
+#: Cura/util/profile.py:227
+msgid ""
+"The minimal layer time can cause the print to slow down so much it starts to "
+"ooze. The minimal feedrate protects against this. Even if a print gets "
+"slowed down it will never be slower than this minimal speed."
+msgstr ""
+"最少层时间可能会到时机器打印速度下降,从而导致漏液.这个最小送料速率是用来阻"
+"止\n"
+"此类情况的.即便机器速度下降,也不会低于这个速度."
+
+#: Cura/util/profile.py:228
+msgid "Cool head lift"
+msgstr "喷头移开冷却"
+
+#: Cura/util/profile.py:228
+msgid ""
+"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
+"the extra time so the minimal layer time is always hit."
+msgstr "当最小打印时间被激活,需要冷却的时候,升起打印头,然后等待到冷却时间达到"
+
+#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231
+msgid "Infill"
+msgstr "填充"
+
+#: Cura/util/profile.py:229
+msgid "Solid infill top"
+msgstr "填充顶层"
+
+#: Cura/util/profile.py:229
+msgid ""
+"Create a solid top surface, if set to false the top is filled with the fill "
+"percentage. Useful for cups/vases."
+msgstr ""
+"打印一个坚实的顶部表面,如果不勾选,将会以设置的填充比例打印.对于打印花瓶等比"
+"较\n"
+"有用"
+
+#: Cura/util/profile.py:230
+msgid "Solid infill bottom"
+msgstr "填充底层"
+
+#: Cura/util/profile.py:230
+msgid ""
+"Create a solid bottom surface, if set to false the bottom is filled with the "
+"fill percentage. Useful for buildings."
+msgstr ""
+"打印一个坚实的底部,如果关闭则会根据填充比例填充,当打印建筑类的时候比较有用"
+
+#: Cura/util/profile.py:231
+msgid "Infill overlap (%)"
+msgstr "填充重合(%)"
+
+#: Cura/util/profile.py:231
+msgid ""
+"Amount of overlap between the infill and the walls. There is a slight "
+"overlap with the walls and the infill so the walls connect firmly to the "
+"infill."
+msgstr ""
+"内部填充和外表面的重合交叉程度,填充和外表面交叉有助于提升外表面和填充的连接坚"
+"固性"
+
+#: Cura/util/profile.py:232
+msgid "Structure type"
+msgstr "支撑类型"
+
+#: Cura/util/profile.py:232
+msgid ""
+"The type of support structure.\n"
+"Grid is very strong and can come off in 1 piece, however, sometimes it is "
+"too strong.\n"
+"Lines are single walled lines that break off one at a time. Which is more "
+"work to remove, but as it is less strong it does work better on tricky "
+"prints."
+msgstr ""
+"支撑的结构类型\n"
+"Grid是一个比较结实的结构,能够一次性剥离,但是有时候太结实了.Line是线条装填充"
+
+#: Cura/util/profile.py:233
+msgid "Overhang angle for support (deg)"
+msgstr "支撑临界角(deg)"
+
+#: Cura/util/profile.py:233
+msgid ""
+"The minimal angle that overhangs need to have to get support. With 90 degree "
+"being horizontal and 0 degree being vertical."
+msgstr "在模型上判断需要生成支撑的最小角度,0度是水平的,90度是垂直的"
+
+#: Cura/util/profile.py:234
+msgid "Fill amount (%)"
+msgstr "支撑数量"
+
+#: Cura/util/profile.py:234
+#, python-format
+msgid ""
+"Amount of infill structure in the support material, less material gives "
+"weaker support which is easier to remove. 15% seems to be a good average."
+msgstr ""
+"支撑材料的填充密度,较少的材料可以让支撑比较容易剥离.15%是个比较合适的值."
+
+#: Cura/util/profile.py:235
+msgid "Distance X/Y (mm)"
+msgstr "X/Y轴距离"
+
+#: Cura/util/profile.py:235
+msgid ""
+"Distance of the support material from the print, in the X/Y directions.\n"
+"0.7mm gives a nice distance from the print so the support does not stick to "
+"the print."
+msgstr ""
+"支撑材料在X/Y方向和物体的距离\n"
+"0.7mm 是一个比较合适的支撑距离,这样支撑和打印物体不会黏在一起"
+
+#: Cura/util/profile.py:236
+msgid "Distance Z (mm)"
+msgstr "Z轴距离"
+
+#: Cura/util/profile.py:236
+msgid ""
+"Distance from the top/bottom of the support to the print. A small gap here "
+"makes it easier to remove the support but makes the print a bit uglier.\n"
+"0.15mm gives a good seperation of the support material."
+msgstr ""
+"支撑在Z方向和打印物体的底部和顶部距离,一个小的间距可以让支撑容易被取掉，但"
+"是\n"
+"会导致打印效果变差\n"
+"0.15mm是一个比较好的设置"
+
+#: Cura/util/profile.py:237 Cura/util/profile.py:238
+msgid "Black Magic"
+msgstr "黑魔法"
+
+#: Cura/util/profile.py:237
+msgid "Spiralize the outer contour"
+msgstr "外部轮廓启用Spiralize"
+
+#: Cura/util/profile.py:237
+msgid ""
+"Spiralize is smoothing out the Z move of the outer edge. This will create a "
+"steady Z increase over the whole print. This feature turns a solid object "
+"into a single walled print with a solid bottom.\n"
+"This feature used to be called Joris in older versions."
+msgstr ""
+"Spiralize是一个在Z方向帮助打印光滑的功能,它在整个打印过程中会稳固增加Z,这个"
+"功\n"
+"能可以使得打印物体像有结实底部的单面墙一样.\n"
+"这个功能在旧版本里叫Joris."
+
+#: Cura/util/profile.py:238
+msgid "Only follow mesh surface"
+msgstr "只打印模型表面"
+
+#: Cura/util/profile.py:238
+msgid ""
+"Only follow the mesh surfaces of the 3D model, do not do anything else. No "
+"infill, no top/bottom, nothing."
+msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"
+
+#: Cura/util/profile.py:240
+msgid "Brim line amount"
+msgstr "边沿走线圈数"
+
+#: Cura/util/profile.py:240
+msgid ""
+"The amount of lines used for a brim, more lines means a larger brim which "
+"sticks better, but this also makes your effective print area smaller."
+msgstr ""
+"使用Brim的数量,越大的数字能使你打印的物体更容易粘在平台上,但同时会缩小可用"
+"打\n"
+"印区域"
+
+#: Cura/util/profile.py:241
+msgid "Extra margin (mm)"
+msgstr "额外边缘(mm)"
+
+#: Cura/util/profile.py:241
+msgid ""
+"If the raft is enabled, this is the extra raft area around the object which "
+"is also rafted. Increasing this margin will create a stronger raft while "
+"using more material and leaving less area for your print."
+msgstr ""
+"如果启用底座,这个是额外的底座区域,增大这个数字可以使得底座更有力,但会缩小你"
+"的\n"
+"打印区域."
+
+#: Cura/util/profile.py:242
+msgid "Line spacing (mm)"
+msgstr "走线间隔(mm)"
+
+#: Cura/util/profile.py:242
+msgid ""
+"When you are using the raft this is the distance between the centerlines of "
+"the raft line."
+msgstr "当使用底座的时候,这个数字用来设置距离中心线的距离"
+
+#: Cura/util/profile.py:243
+msgid "Base thickness (mm)"
+msgstr "基底层厚度(mm)"
+
+#: Cura/util/profile.py:243
+msgid ""
+"When you are using the raft this is the thickness of the base layer which is "
+"put down."
+msgstr "底座最底层的厚度"
+
+#: Cura/util/profile.py:244
+msgid "Base line width (mm)"
+msgstr "基底层走线宽度(mm)"
+
+#: Cura/util/profile.py:244
+msgid ""
+"When you are using the raft this is the width of the base layer lines which "
+"are put down."
+msgstr "底层线条的宽度"
+
+#: Cura/util/profile.py:245
+msgid "Interface thickness (mm)"
+msgstr "接触层厚度(mm)"
+
+#: Cura/util/profile.py:245
+msgid ""
+"When you are using the raft this is the thickness of the interface layer "
+"which is put down."
+msgstr "底座上层的厚度"
+
+#: Cura/util/profile.py:246
+msgid "Interface line width (mm)"
+msgstr "接触层走线宽度 (mm)"
+
+#: Cura/util/profile.py:246
+msgid ""
+"When you are using the raft this is the width of the interface layer lines "
+"which are put down."
+msgstr "底座接口层线条的宽度"
+
+#: Cura/util/profile.py:247
+msgid "Airgap"
+msgstr "悬空间隙"
+
+#: Cura/util/profile.py:247
+msgid "Gap between the last layer of the raft the whole print."
+msgstr "底座和表层的间隔,在使用PLA的时候,0.2mm左右的间隔可以你很好的剥离底座"
+
+#: Cura/util/profile.py:248
+msgid "First Layer Airgap"
+msgstr "第一层悬空间隙"
+
+#: Cura/util/profile.py:248
+msgid ""
+"Gap between the last layer of the raft and the first printing layer. A small "
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "
+"value is added on top of the 'Airgap' setting."
+msgstr ""
+"在基底和模型之间的间隙距离\n"
+"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"
+
+#: Cura/util/profile.py:249
+msgid "Surface layers"
+msgstr "表层"
+
+#: Cura/util/profile.py:249
+msgid ""
+"Amount of surface layers put on top of the raft, these are fully filled "
+"layers on which the model is printed."
+msgstr "在底座上打印表层的数量,这些层是完全填充的"
+
+#: Cura/util/profile.py:250
+msgid "Surface layer thickness (mm)"
+msgstr "初始层厚 (mm)"
+
+#: Cura/util/profile.py:250
+msgid "Thickness of each surface layer."
+msgstr "表面层的厚度"
+
+#: Cura/util/profile.py:251
+msgid "Surface layer line width (mm)"
+msgstr "接触层走线宽度 (mm)"
+
+#: Cura/util/profile.py:251
+msgid "Width of the lines for each surface layer."
+msgstr "表层线宽"
+
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254
+#: Cura/util/profile.py:255
+msgid "Fix horrible"
+msgstr "缺陷修复"
+
+#: Cura/util/profile.py:252
+msgid "Combine everything (Type-A)"
+msgstr "闭合面片(Type-A)"
+
+#: Cura/util/profile.py:252 Cura/util/profile.py:253
+msgid ""
+"This expert option adds all parts of the model together. The result is "
+"usually that internal cavities disappear. Depending on the model this can be "
+"intended or not. Enabling this option is at your own risk. Type-A is "
+"dependent on the model normals and tries to keep some internal holes intact. "
+"Type-B ignores all internal holes and only keeps the outside shape per layer."
+msgstr ""
+"这个专家选项会组合所有的打印物体到一起.结果一般是内部空隙消失了,取决于物体"
+"能\n"
+"否这样做.A类型是比较正常的,会尽量保持所有的内孔不变.B类型会忽略所有的内部"
+"孔,\n"
+"只保持外部形状."
+
+#: Cura/util/profile.py:253
+msgid "Combine everything (Type-B)"
+msgstr "闭合面片(Type-B)"
+
+#: Cura/util/profile.py:254
+msgid "Keep open faces"
+msgstr "保持开放面"
+
+#: Cura/util/profile.py:254
+msgid ""
+"This expert option keeps all the open bits of the model intact. Normally "
+"Cura tries to stitch up small holes and remove everything with big holes, "
+"but this option keeps bits that are not properly part of anything and just "
+"goes with whatever is left. This option is usually not what you want, but it "
+"might enable you to slice models otherwise failing to produce proper paths.\n"
+"As with all \"Fix horrible\" options, results may vary and use at your own "
+"risk."
+msgstr ""
+"这个选项会保持所有的开放表面不动.正常情况下Cura会尝试着填补所有的洞,但是这"
+"个\n"
+"选项会打开会则会不理会这些洞.这个选项一般是你所不需要的,除非在出现切片失败"
+"的\n"
+"情况下,你可能需要打开它.\n"
+
+#: Cura/util/profile.py:255
+msgid "Extensive stitching"
+msgstr "拼接"
+
+#: Cura/util/profile.py:255
+msgid ""
+"Extensive stitching tries to fix up open holes in the model by closing the "
+"hole with touching polygons. This algorthm is quite expensive and could "
+"introduce a lot of processing time.\n"
+"As with all \"Fix horrible\" options, results may vary and use at your own "
+"risk."
+msgstr ""
+"拼接选项是在切片时尝试恢复那些开放的面,变成闭合的多边形.但是这个算法非常消"
+"耗\n"
+"资源,甚至使得处理时间大大增加\n"
+"(和所有的修正错误选项一样,实验性质,风险自担)"
+
+#: Cura/util/profile.py:481
+msgid "Save profile on slice"
+msgstr "保存切片配置"
+
+#: Cura/util/profile.py:481
+msgid ""
+"When slicing save the profile as [stl_file]_profile.ini next to the model."
+msgstr "在切片时保存[stl_file]_profile.ini可以用于下个模型"
+
+#: Cura/util/profile.py:482
+msgid "Cost (price/kg)"
+msgstr "成本 (price/kg)"
+
+#: Cura/util/profile.py:482
+msgid "Cost of your filament per kg, to estimate the cost of the final print."
+msgstr "每公斤的成本花费,用来计算打印物体的成本"
+
+#: Cura/util/profile.py:483
+msgid "Cost (price/m)"
+msgstr "成本 (price/m)"
+
+#: Cura/util/profile.py:483
+msgid ""
+"Cost of your filament per meter, to estimate the cost of the final print."
+msgstr "每公斤的成本花费,用来计算打印物体的成本"
+
+#: Cura/util/profile.py:484
+msgid "Auto detect SD card drive"
+msgstr "自动检测SD卡"
+
+#: Cura/util/profile.py:484
+msgid ""
+"Auto detect the SD card. You can disable this because on some systems "
+"external hard-drives or USB sticks are detected as SD card."
+msgstr "自动检测SD卡.你可以在当外接硬盘或者U盘被认为是SD的时候关掉这个选项"
+
+#: Cura/util/profile.py:485
+msgid "Check for updates"
+msgstr "检查更新"
+
+#: Cura/util/profile.py:485
+msgid "Check for newer versions of Cura on startup"
+msgstr "Cura启动时检查更新"
+
+#: Cura/util/profile.py:486
+msgid "Send usage statistics"
+msgstr "提交统计信息"
+
+#: Cura/util/profile.py:486
+msgid "Submit anonymous usage information to improve future versions of Cura"
+msgstr "提交匿名的使用信息,用于改进下版本的Cura"
+
+#: Cura/util/profile.py:488
+msgid "Density (kg/m3)"
+msgstr "填充密度 (%)"
+
+#: Cura/util/profile.py:488
+msgid ""
+"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
+"This value is used to estimate the weight if the filament used for the print."
+msgstr ""
+"每立方米的耗材重量,PLA大概1240左右,ABS是1040,这个值用来估算打印物体的重量"
+
+#: Cura/util/profile.py:489
+msgid ""
+"Change the language in which Cura runs. Switching language requires a "
+"restart of Cura"
+msgstr "选择语言,需要重启Cura"
+
+#: Cura/util/profile.py:492
+msgid "Model colour"
+msgstr "模型颜色"
+
+#: Cura/util/profile.py:492
+msgid "Display color for first extruder"
+msgstr "第一个喷嘴的颜色"
+
+#: Cura/util/profile.py:493
+msgid "Model colour (2)"
+msgstr "模型颜色(2)"
+
+#: Cura/util/profile.py:493
+msgid "Display color for second extruder"
+msgstr "第二个喷嘴的颜色"
+
+#: Cura/util/profile.py:494
+msgid "Model colour (3)"
+msgstr "模型颜色(3）"
+
+#: Cura/util/profile.py:494
+msgid "Display color for third extruder"
+msgstr "第三个喷嘴的颜色"
+
+#: Cura/util/profile.py:495
+msgid "Model colour (4)"
+msgstr "模型颜色(4)"
+
+#: Cura/util/profile.py:495
+msgid "Display color for forth extruder"
+msgstr "第四个喷嘴的颜色"
+
+#: Cura/util/profile.py:496
+msgid "Printing window type"
+msgstr "打印窗口类型"
+
+#: Cura/util/profile.py:496
+msgid "Select the interface used for USB printing."
+msgstr "USB接口"
+
+#: Cura/util/profile.py:508
+msgid "Maximum width (mm)"
+msgstr "最大宽度 (mm)"
+
+#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510
+msgid "Size of the machine in mm"
+msgstr "机器的打印尺寸(mm)"
+
+#: Cura/util/profile.py:509
+msgid "Maximum depth (mm)"
+msgstr "最大深度(mm)"
+
+#: Cura/util/profile.py:510
+msgid "Maximum height (mm)"
+msgstr "最大高度 (mm)"
+
+#: Cura/util/profile.py:511
+msgid "Machine center 0,0"
+msgstr "平台中心 0,0"
+
+#: Cura/util/profile.py:511
+msgid ""
+"Machines firmware defines the center of the bed as 0,0 instead of the front "
+"left corner."
+msgstr "固件规定平台中心为0,0,而不是左前角"
+
+#: Cura/util/profile.py:512
+msgid "Build area shape"
+msgstr "构建平台形状"
+
+#: Cura/util/profile.py:512
+msgid "The shape of machine build area."
+msgstr "机器构建平台的形状"
+
+#: Cura/util/profile.py:514
+msgid ""
+"If you have an heated bed, this enabled heated bed settings (requires "
+"restart)"
+msgstr "如果你有热床,这里可以打开热床设置(需要重启)"
+
+#: Cura/util/profile.py:515
+msgid "GCode Flavor"
+msgstr "Gcode类型"
+
+#: Cura/util/profile.py:515
+msgid ""
+"Flavor of generated GCode.\n"
+"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
+"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
+"machine instead of the slicer.\n"
+"MakerBot GCode has a few changes in the way GCode is generated, but still "
+"requires MakerWare to generate to X3G.\n"
+"BFB style generates RPM based code.\n"
+"Mach3 uses A,B,C instead of E for extruders."
+msgstr ""
+"GCode生成的风格\n"
+"RepRap一般是5D GCode,兼容于Marlin/Sprinter固件\n"
+"UltiGCode是一种GCode派生,把部分配置放到里机器里,而不是切片软件\n"
+
+#: Cura/util/profile.py:516
+msgid "Extruder count"
+msgstr "挤出机数量"
+
+#: Cura/util/profile.py:516
+msgid "Amount of extruders in your machine."
+msgstr "你机器所配备的挤出头的数量"
+
+#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521
+msgid "Offset X"
+msgstr "X偏移"
+
+#: Cura/util/profile.py:517 Cura/util/profile.py:518
+msgid "The offset of your secondary extruder compared to the primary."
+msgstr "相对于首要打印头的偏移"
+
+#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522
+msgid "Offset Y"
+msgstr "Y偏移"
+
+#: Cura/util/profile.py:519 Cura/util/profile.py:520
+msgid "The offset of your tertiary extruder compared to the primary."
+msgstr "相对于首要打印头的偏移"
+
+#: Cura/util/profile.py:521 Cura/util/profile.py:522
+msgid "The offset of your forth extruder compared to the primary."
+msgstr "相对于首要打印头的偏移"
+
+#: Cura/util/profile.py:523
+msgid "E-Steps per 1mm filament"
+msgstr "1mm挤出量E电机步数(Step per E)"
+
+#: Cura/util/profile.py:523
+msgid ""
+"Amount of steps per mm filament extrusion. If set to 0 then this value is "
+"ignored and the value in your firmware is used."
+msgstr "机器挤出1mm所需要的电机步数"
+
+#: Cura/util/profile.py:524
+msgid "Serial port"
+msgstr "端口"
+
+#: Cura/util/profile.py:524
+msgid "Serial port to use for communication with the printer"
+msgstr "用来连接你的打印及的串口端口"
+
+#: Cura/util/profile.py:526
+msgid "Baudrate"
+msgstr "波特率"
+
+#: Cura/util/profile.py:526
+msgid ""
+"Speed of the serial port communication\n"
+"Needs to match your firmware settings\n"
+"Common values are 250000, 115200, 57600"
+msgstr ""
+"串口端口所使用的速率\n"
+"需要和你所使用的固件匹配\n"
+"一般为250000, 115200, 57600"
+
+#: Cura/util/profile.py:529
+msgid "Head size towards X min (mm)"
+msgstr "到X最小值方向的喷头大小 (mm)"
+
+#: Cura/util/profile.py:529
+msgid ""
+"The head size when printing multiple objects, measured from the tip of the "
+"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
+"is on the left side."
+msgstr ""
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
+"Ultimaker机型,如果风扇在左边,设置成75mm"
+
+#: Cura/util/profile.py:530
+msgid "Head size towards Y min (mm)"
+msgstr "到Y最小值方向的喷头大小 (mm)"
+
+#: Cura/util/profile.py:530 Cura/util/profile.py:531
+msgid ""
+"The head size when printing multiple objects, measured from the tip of the "
+"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
+"is on the left side."
+msgstr ""
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
+"Ultimaker机型,如果风扇在左边,设置成18mm'"
+
+#: Cura/util/profile.py:531
+msgid "Head size towards X max (mm)"
+msgstr "到X最大值方向的喷头大小 (mm)"
+
+#: Cura/util/profile.py:532
+msgid "Head size towards Y max (mm)"
+msgstr "到Y最大值方向的喷头大小 (mm)"
+
+#: Cura/util/profile.py:532
+msgid ""
+"The head size when printing multiple objects, measured from the tip of the "
+"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
+"is on the left side."
+msgstr ""
+"当打印多个物体时,设置的打印头的大小.测量方法:从喷嘴到打印头最外端的距离.\n"
+"Ultimaker机型,如果风扇在左边,设置成35mm"
+
+#: Cura/util/profile.py:533
+msgid "Printer gantry height (mm)"
+msgstr "十字轴高度 (mm)"
+
+#: Cura/util/profile.py:533
+msgid ""
+"The height of the gantry holding up the printer head. If an object is higher "
+"then this then you cannot print multiple objects one for one. 60mm for an "
+"Ultimaker."
+msgstr ""
+"用来悬挂打印头的十字轴的高度,如果打印物体高于这个高度将无法多物体一起打印"
+
+#: Cura/util/profile.py:535
+#, python-format
+msgid "More flow than 150% is rare and usually not recommended."
+msgstr "流量高于150%一般来说不推荐."
+
+#: Cura/util/profile.py:536
+#, python-format
+msgid "Less flow than 50% is rare and usually not recommended."
+msgstr "不推荐低于50%的流量."
+
+#: Cura/util/profile.py:537
+#, python-format
+msgid ""
+"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
+"are not recommended."
+msgstr "层厚 %.2fmm 大于喷嘴大小 80%% 一般来说不建议,效果不好"
+
+#: Cura/util/profile.py:539
+msgid ""
+"It is highly unlikely that your machine can achieve a printing speed above "
+"150mm/s"
+msgstr "你确定你的机器可以高于150mm/s的打印速度?"
+
+#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543
+#: Cura/util/profile.py:544
+msgid "Temperatures above 260C could damage your machine, be careful!"
+msgstr "请小心,温度大于260摄氏度可能会损坏你的机器"
+
+#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547
+#: Cura/util/profile.py:548
+msgid ""
+"Are you sure your filament is that thick? Normal filament is around 3mm or "
+"1.75mm."
+msgstr "你确定你的耗材有这么粗?一般耗材只为3mm或1.75mm"
+
+#: Cura/util/profile.py:549
+msgid ""
+"It is highly unlikely that your machine can achieve a travel speed above "
+"300mm/s"
+msgstr "你确定你的机器可以达到300mm/s的速度?"
+
+#: Cura/util/profile.py:550
+#, python-format
+msgid ""
+"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
+"results and is not recommended."
+msgstr "底层厚度大于 %.2fmm (3/4 喷嘴大小)一般结果都会比较糟糕."
+
+#: Cura/util/sliceEngine.py:93
+#, python-format
+msgid "%d minutes"
+msgstr ""
+
+#: Cura/util/sliceEngine.py:95
+#, python-format
+msgid "%d hour %d minutes"
+msgstr ""
+
+#: Cura/util/sliceEngine.py:96
+#, python-format
+msgid "%d hours %d minutes"
+msgstr ""
+
+#: Cura/util/sliceEngine.py:101
+#, python-format
+msgid "%0.2f meter %0.0f gram"
+msgstr ""
~ianmdlvl / cura.git / commitdiff