Update several flexystruder profiles for Mini

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index f09c785890ef01bd62bd67398c36011d6dce6ff0..2604fa5c8453bf4e74ff53829aa07169fee15d92 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -6,8 +6,8 @@ solid_layer_thickness = 1.25
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
-print_speed = 50
-print_temperature = 218
+print_speed = 12
+print_temperature = 225
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -19,14 +19,14 @@ support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 7
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
index 35b562fced8f6d97e2ad9a162b6a4503eab167cd..19500d29f554112c6b5649ffc8d1ab7fbbc0c709 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -6,8 +6,8 @@ solid_layer_thickness = 0.8
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
-print_speed = 50
-print_temperature = 225
+print_speed = 14
+print_temperature = 227
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -19,14 +19,14 @@ support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -37,8 +37,8 @@ layer0_width_factor = 125
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 175
-bottom_layer_speed = 14
-infill_speed = 20
+bottom_layer_speed = 10
+infill_speed = 18
 solidarea_speed = 14
 inset0_speed = 14
 insetx_speed = 16
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index f7a8d43fabc2de82ad2428529d468bb47ad1a926..21eefbe4ce7c08f7bb602b75ef379bd526da7211 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -6,27 +6,27 @@ solid_layer_thickness = 0.65
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
-print_speed = 50
-print_temperature = 222
+print_speed = 14
+print_temperature = 227
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
 print_temperature5 = 0
-print_bed_temperature = 40
+print_bed_temperature = 50
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -38,10 +38,10 @@ object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 175
 bottom_layer_speed = 8
-infill_speed = 18
-solidarea_speed = 18
-inset0_speed = 12
-insetx_speed = 16
+infill_speed = 14
+solidarea_speed = 10
+inset0_speed = 10
+insetx_speed = 12
 cool_min_layer_time = 20
 fan_enabled = True
 skirt_line_count = 1
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index 4b37196a13f8234db16a437cdb556d9ef978cb85..d87dc1ecd63277c13363db30211969c34396946a 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -6,8 +6,8 @@ solid_layer_thickness = 0.75
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
-print_speed = 15
-print_temperature = 220
+print_speed = 12
+print_temperature = 225
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -19,14 +19,14 @@ support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -39,7 +39,7 @@ overlap_dual = 0.15
 travel_speed = 175
 bottom_layer_speed = 10
 infill_speed = 12
-solidarea_speed = 8
+solidarea_speed = 10
 inset0_speed = 10
 insetx_speed = 12
 cool_min_layer_time = 10
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
index 570327cd045346b4d511a2d62e6d3ec61f7c1226..0ef3e9e7e99fef08fdff2c3ec5c8b5c73196d53c 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -19,14 +19,14 @@ support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -37,11 +37,11 @@ layer0_width_factor = 125
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 175
-bottom_layer_speed = 14
-infill_speed = 20
-solidarea_speed = 16
-inset0_speed = 16
-insetx_speed = 18
+bottom_layer_speed = 10
+infill_speed = 16
+solidarea_speed = 14
+inset0_speed = 14
+insetx_speed = 16
 cool_min_layer_time = 10
 fan_enabled = True
 skirt_line_count = 1
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index 83d9a815e231fbc538119ab3963b2a0dc18c240d..fd573f756cac85d13b3a6772522f279aa79582ba 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -6,8 +6,8 @@ solid_layer_thickness = 0.65
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
-print_speed = 18
-print_temperature = 220
+print_speed = 14
+print_temperature = 225
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -19,14 +19,14 @@ support_dual_extrusion = Both
 wipe_tower = False
 wipe_tower_volume = 15
 ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
 filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
 filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
@@ -37,8 +37,8 @@ layer0_width_factor = 125
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 175
-bottom_layer_speed = 12
-infill_speed = 20
+bottom_layer_speed = 10
+infill_speed = 16
 solidarea_speed = 14
 inset0_speed = 14
 insetx_speed = 16
@@ -84,6 +84,7 @@ object_center_y = -1
 simplemodesettings = 
 simplemodeprofile = 2_normal
 simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
 
 [alterations]
 start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
@@ -97,8 +98,9 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G92 E0                       ; set extruder position to 0
        M140 S{print_bed_temperature}; get bed heating up
        G28                          ; home all
+       M907 X675                    ; reduce extruder torque for safety
        M109 S160                    ; set to cleaning temp and wait
-       G1 Z150 E-30 F75             ; suck up XXmm of filament
+       G1 Z150 E-30 F45             ; suck up XXmm of filament
        M109 S170                    ; heat up rest of way
        G1 X45 Y174 F11520           ; move behind scraper
        G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
@@ -139,7 +141,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        M400                         ; clear buffer
        M109 S{print_temperature}    ; set extruder temp and wait
        G4 S15                       ; wait for bed to temp up
-       G1 Z2 E0 F75                 ; extrude filament back into nozzle
+       G1 Z2 E0 F45                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
        M400
@@ -148,8 +150,6 @@ end.gcode =
        M107                                         ; fans off
        G92 E5                                       ; set extruder to 5mm for retract on print end
        G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ;
        G1 X145 F1000                                ; move to cooling positioning
        G1 Y175 F1000                                ; move to cooling positioning
        M84                                          ; steppers off