;{profile_string}
""")
if self.printMaterialHIPS.GetValue():
- put('print_bed_temperature', '100')
+ put('print_bed_temperature', '97')
if self.printTypeLow.GetValue():
put('layer_height', '0.38')
put('print_speed', '85')
put('inset0_speed', '20')
put('insetx_speed', '25')
if self.printMaterialABS.GetValue():
- put('print_bed_temperature', '110')
+ put('print_bed_temperature', '104')
if self.printTypeLow.GetValue():
put('layer_height', '0.38')
put('print_speed', '85')
put('inset0_speed', '30')
put('insetx_speed', '35')
elif self.printMaterialPLA.GetValue():
- put('print_temperature', '200')
- put('print_bed_temperature', '65')
+ put('print_temperature', '205')
+ put('print_bed_temperature', '60')
put('solid_layer_thickness', '1')
put('print_speed', '50')
put('retraction_amount', '1.5')
- put('bottom_layer_speed', '20')
- put('infill_speed', '55')
- put('inset0_speed', '45')
- put('insetx_speed', '50')
+ put('bottom_layer_speed', '15')
+ put('infill_speed', '40')
+ put('inset0_speed', '30')
+ put('insetx_speed', '35')
put('cool_min_layer_time', '20')
- put('fan_full_height', '1')
- put('fan_speed', '100')
+ put('fan_full_height', '0.5')
+ put('fan_speed', '75')
put('fan_speed_max', '100')
put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}