Explain the wipe tower volume better.

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index ded2e94c5c444db4337cbf15d924d55411a9a533..083e6b12936aa5e0b5d109fa9b9aa4a294f40589 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -167,7 +167,7 @@ setting('support',                'None', [_('None'), _('Touching buildplate'),
 setting('platform_adhesion',      'None', [_('None'), _('Brim'), _('Raft')], 'basic', _('Support')).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and the recommended option.\nRaft adds a thick raster at below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
 setting('support_dual_extrusion',  'Both', [_('Both'), _('First extruder'), _('Second extruder')], 'basic', _('Support')).setLabel(_("Support dual extrusion"), _("Which extruder to use for support material, for break-away support you can use both extruders.\nBut if one of the materials is more expensive then the other you could select an extruder to use for support material. This causes more extruder switches.\nYou can also use the 2nd extruder for soluble support materials."))
 setting('wipe_tower',              False, bool,  'basic',    _('Dual extrusion')).setLabel(_("Wipe&prime tower"), _("The wipe-tower is a tower printed on every layer when switching between nozzles.\nThe old nozzle is wiped off on the tower before the new nozzle is used to print the 2nd color."))
-setting('wipe_tower_volume',          15, float, 'expert',   _('Dual extrusion')).setLabel(_("Wipe&prime tower volume (mm3)"), _("The amount of material put in the wipe/prime tower.\nThis is done in volume because in general you want to extrude a\ncertain amount of volume to get the extruder going, independent on the layer height.\nThis means that with thinner layers, your tower gets bigger."))
+setting('wipe_tower_volume',          15, float, 'expert',   _('Dual extrusion')).setLabel(_("Wipe&prime tower volume per layer (mm3)"), _("The amount of material put in the wipe/prime tower.\nThis is done in volume because in general you want to extrude a\ncertain amount of volume to get the extruder going, independent on the layer height.\nThis means that with thinner layers, your tower gets bigger."))
 setting('ooze_shield',             False, bool,  'basic',    _('Dual extrusion')).setLabel(_("Ooze shield"), _("The ooze shield is a 1 line thick shell around the object which stands a few mm from the object.\nThis shield catches any oozing from the unused nozzle in dual-extrusion."))
 setting('filament_diameter',        2.85, float, 'basic',    _('Filament')).setRange(1).setLabel(_("Diameter (mm)"), _("Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to calibrate it, a higher number means less extrusion, a smaller number generates more extrusion."))
 setting('filament_diameter2',          0, float, 'basic',    _('Filament')).setRange(0).setLabel(_("Diameter2 (mm)"), _("Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter as for nozzle 1."))