1 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
12 from Cura.gui import firmwareInstall
13 from Cura.gui import printWindow
14 from Cura.util import machineCom
15 from Cura.util import profile
16 from Cura.util import gcodeGenerator
17 from Cura.util import resources
18 from Cura.util import version
21 class InfoBox(wx.Panel):
22 def __init__(self, parent):
23 super(InfoBox, self).__init__(parent)
24 self.SetBackgroundColour('#FFFF80')
26 self.sizer = wx.GridBagSizer(5, 5)
27 self.SetSizer(self.sizer)
29 self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
30 self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
31 self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
33 wx.Bitmap(resources.getPathForImage('busy-0.png')),
34 wx.Bitmap(resources.getPathForImage('busy-1.png')),
35 wx.Bitmap(resources.getPathForImage('busy-2.png')),
36 wx.Bitmap(resources.getPathForImage('busy-3.png'))
39 self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
40 self.text = wx.StaticText(self, -1, '')
41 self.extraInfoButton = wx.Button(self, -1, 'i', style=wx.BU_EXACTFIT)
42 self.sizer.Add(self.bitmap, pos=(0, 0), flag=wx.ALL, border=5)
43 self.sizer.Add(self.text, pos=(0, 1), flag=wx.TOP | wx.BOTTOM | wx.ALIGN_CENTER_VERTICAL, border=5)
44 self.sizer.Add(self.extraInfoButton, pos=(0,2), flag=wx.ALL|wx.ALIGN_RIGHT|wx.ALIGN_CENTER_VERTICAL, border=5)
45 self.sizer.AddGrowableCol(1)
47 self.extraInfoButton.Show(False)
49 self.extraInfoUrl = ''
51 self.timer = wx.Timer(self)
52 self.Bind(wx.EVT_TIMER, self.doBusyUpdate, self.timer)
53 self.Bind(wx.EVT_BUTTON, self.doExtraInfo, self.extraInfoButton)
56 def SetInfo(self, info):
57 self.SetBackgroundColour('#FFFF80')
58 self.text.SetLabel(info)
59 self.extraInfoButton.Show(False)
62 def SetError(self, info, extraInfoUrl):
63 self.extraInfoUrl = extraInfoUrl
64 self.SetBackgroundColour('#FF8080')
65 self.text.SetLabel(info)
67 self.extraInfoButton.Show(True)
69 self.SetErrorIndicator()
72 def SetAttention(self, info):
73 self.SetBackgroundColour('#FFFF80')
74 self.text.SetLabel(info)
75 self.extraInfoButton.Show(False)
76 self.SetAttentionIndicator()
80 def SetBusy(self, info):
82 self.SetBusyIndicator()
84 def SetBusyIndicator(self):
86 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
88 def doExtraInfo(self, e):
89 webbrowser.open(self.extraInfoUrl)
91 def doBusyUpdate(self, e):
92 if self.busyState is None:
95 if self.busyState >= len(self.busyBitmap):
97 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
99 def SetReadyIndicator(self):
100 self.busyState = None
101 self.bitmap.SetBitmap(self.readyBitmap)
103 def SetErrorIndicator(self):
104 self.busyState = None
105 self.bitmap.SetBitmap(self.errorBitmap)
107 def SetAttentionIndicator(self):
108 self.busyState = None
109 self.bitmap.SetBitmap(self.attentionBitmap)
111 class ImageButton(wx.Panel):
112 DefaultOverlay = wx.Bitmap(resources.getPathForImage('ImageButton_Overlay.png'))
115 __last_group__ = None
116 def __init__(self, parent, label, bitmap, extra_label=None, overlay=DefaultOverlay, style=None):
117 super(ImageButton, self).__init__(parent)
119 if style is ImageButton.IB_GROUP:
120 ImageButton.__last_group__ = self
121 ImageButton.__groups__[self] = [self]
124 if ImageButton.__last_group__:
125 ImageButton.__groups__[ImageButton.__last_group__].append(self)
126 self.group = ImageButton.__last_group__
129 self.sizer = wx.StaticBoxSizer(wx.StaticBox(self), wx.VERTICAL)
130 self.SetSizer(self.sizer)
132 self.original_overlay = overlay
133 self.overlay = self.createOverlay(bitmap, overlay)
134 self.text = wx.StaticText(self, -1, label)
135 self.bmp = wx.StaticBitmap(self, -1, self.bitmap)
137 self.extra_text = wx.StaticText(self, -1, extra_label)
139 self.extra_text = None
140 self.selected = False
143 self.sizer.Add(self.text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
144 self.sizer.Add(self.bmp, 1, flag=wx.ALL|wx.ALIGN_CENTER|wx.EXPAND, border=5)
146 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
147 self.bmp.Bind(wx.EVT_LEFT_UP, self.OnLeftClick)
151 ImageButton.__groups__[self.group].remove(self)
152 if self == self.group:
153 for ib in ImageButton.__groups__[self.group]:
155 del ImageButton.__groups__[self.group]
156 if ImageButton.__last_group__ == self:
157 ImageButton.__last_group__ = None
159 def TriggerGroupCallbacks(self):
161 for ib in ImageButton.__groups__[self.group]:
162 if ib.GetValue() and ib.callback:
166 if self.GetValue() and self.callback:
169 def OnLeftClick(self, e):
175 def SetValue(self, value):
176 old_value = self.selected
177 self.selected = bool(value)
178 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
179 if self.selected and self.group:
180 for ib in ImageButton.__groups__[self.group]:
185 if self.callback and not old_value and self.selected:
188 def SetLabel(self, label):
189 self.text.SetLabel(label)
192 def SetExtraLabel(self, label):
194 self.extra_text.SetLabel(label)
196 self.extra_text = wx.StaticText(self, -1, label)
197 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
200 def SetBitmap(self, bitmap):
202 self.overlay = self.createOverlay(bitmap, self.original_overlay)
203 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
206 def SetOverlay(self, overlay):
207 self.original_overlay = overlay
208 self.overlay = self.createOverlay(self.bitmap, self.original_overlay)
209 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
212 def OnSelected(self, callback):
213 self.callback = callback
215 def createOverlay(self, bitmap, overlay):
216 result = bitmap.GetSubBitmap(wx.Rect(0, 0, *bitmap.Size))
217 (width, height) = bitmap.GetSize()
218 overlay_image = wx.ImageFromBitmap(overlay)
219 overlay_image = overlay_image.Scale(width, height, wx.IMAGE_QUALITY_HIGH)
220 overlay_scaled = wx.BitmapFromImage(overlay_image)
222 dc.SelectObject(result)
223 dc.DrawBitmap(overlay_scaled, 0, 0)
224 dc.SelectObject(wx.NullBitmap)
228 class InfoPage(wx.wizard.WizardPageSimple):
229 def __init__(self, parent, title):
230 wx.wizard.WizardPageSimple.__init__(self, parent)
232 parent.GetPageAreaSizer().Add(self)
233 sizer = wx.GridBagSizer(5, 5)
237 self.title = wx.StaticText(self, -1, title)
238 font = wx.Font(18, wx.SWISS, wx.NORMAL, wx.BOLD)
239 self.title.SetFont(font)
240 # HACK ALERT: For some reason, the StaticText keeps its same size as if
241 # the font was not modified, this causes the text to wrap and to
242 # get out of bounds of the widgets area and hide other widgets.
243 # The only way I found for the widget to get its right size was to calculate
244 # the new font's extent and set the min size on the widget
245 self.title.SetMinSize(self.GetTextExtent(font, title))
246 sizer.Add(self.title, pos=(0, 0), span=(1, 2), flag=wx.ALIGN_CENTRE | wx.ALL)
247 sizer.Add(wx.StaticLine(self, -1), pos=(1, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
248 sizer.AddGrowableCol(1)
252 def GetTextExtent(self, font, text):
255 w,h = dc.GetTextExtent(text)
258 def AddText(self, info):
259 text = wx.StaticText(self, -1, info)
260 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
264 def AddSeperator(self):
265 self.GetSizer().Add(wx.StaticLine(self, -1), pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
268 def AddHiddenSeperator(self):
271 def AddInfoBox(self):
272 infoBox = InfoBox(self)
273 self.GetSizer().Add(infoBox, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
277 def AddRadioButton(self, label, style=0):
278 radio = wx.RadioButton(self, -1, label, style=style)
279 self.GetSizer().Add(radio, pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
283 def AddCheckbox(self, label, checked=False):
284 check = wx.CheckBox(self, -1)
285 text = wx.StaticText(self, -1, label)
286 check.SetValue(checked)
287 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
288 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 2), flag=wx.ALL)
292 def AddButton(self, label):
293 button = wx.Button(self, -1, label)
294 self.GetSizer().Add(button, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
298 def AddDualButton(self, label1, label2):
299 button1 = wx.Button(self, -1, label1)
300 self.GetSizer().Add(button1, pos=(self.rowNr, 0), flag=wx.RIGHT)
301 button2 = wx.Button(self, -1, label2)
302 self.GetSizer().Add(button2, pos=(self.rowNr, 1))
304 return button1, button2
306 def AddTextCtrl(self, value):
307 ret = wx.TextCtrl(self, -1, value)
308 self.GetSizer().Add(ret, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
312 def AddLabelTextCtrl(self, info, value):
313 text = wx.StaticText(self, -1, info)
314 ret = wx.TextCtrl(self, -1, value)
315 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
316 self.GetSizer().Add(ret, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
320 def AddTextCtrlButton(self, value, buttonText):
321 text = wx.TextCtrl(self, -1, value)
322 button = wx.Button(self, -1, buttonText)
323 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
324 self.GetSizer().Add(button, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
328 def AddBitmap(self, bitmap):
329 bitmap = wx.StaticBitmap(self, -1, bitmap)
330 self.GetSizer().Add(bitmap, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
335 panel = wx.Panel(self, -1)
336 sizer = wx.GridBagSizer(2, 2)
337 panel.SetSizer(sizer)
338 self.GetSizer().Add(panel, pos=(self.rowNr, 0), span=(1, 2), flag=wx.ALL | wx.EXPAND)
342 def AddCheckmark(self, label, bitmap):
343 check = wx.StaticBitmap(self, -1, bitmap)
344 text = wx.StaticText(self, -1, label)
345 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
346 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 1), flag=wx.ALL)
350 def AddCombo(self, label, options):
351 combo = wx.ComboBox(self, -1, options[0], choices=options, style=wx.CB_DROPDOWN|wx.CB_READONLY)
352 text = wx.StaticText(self, -1, label)
353 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.ALIGN_CENTER)
354 self.GetSizer().Add(combo, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
358 def AddImageButton(self, panel, x, y, label, filename, image_size=None,
359 extra_label=None, overlay=ImageButton.DefaultOverlay, style=None):
360 ib = ImageButton(panel, label, self.GetBitmap(filename, image_size), extra_label, overlay, style)
361 panel.GetSizer().Add(ib, pos=(x, y), flag=wx.LEFT | wx.RIGHT | wx.BOTTOM, border=10)
364 def GetBitmap(self, filename, image_size):
365 if image_size == None:
366 return wx.Bitmap(resources.getPathForImage(filename))
368 image = wx.Image(resources.getPathForImage(filename))
369 image_scaled = image.Scale(image_size[0], image_size[1], wx.IMAGE_QUALITY_HIGH)
370 return wx.BitmapFromImage(image_scaled)
381 class PrintrbotPage(InfoPage):
382 def __init__(self, parent):
383 self._printer_info = [
384 # X, Y, Z, Nozzle Size, Filament Diameter, PrintTemperature, Print Speed, Travel Speed, Retract speed, Retract amount, use bed level sensor
385 ("Simple Metal", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, True),
386 ("Metal Plus", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
387 ("Simple Makers Kit", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, True),
388 (":" + _("Older models"),),
389 ("Original", 130, 130, 130, 0.5, 2.95, 208, 40, 70, 30, 1, False),
390 ("Simple Maker's Edition v1", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
391 ("Simple Maker's Edition v2 (2013 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
392 ("Simple Maker's Edition v3 (2014 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
393 ("Jr v1", 115, 120, 80, 0.4, 1.75, 208, 40, 70, 30, 1, False),
394 ("Jr v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
395 ("LC v1", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
396 ("LC v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
397 ("Plus v1", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
398 ("Plus v2", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
399 ("Plus v2.1", 185, 220, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
400 ("Plus v2.2 (Model 1404/140422/140501/140507)", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
401 ("Go v2 Large", 505, 306, 310, 0.4, 1.75, 208, 35, 70, 30, 1, True),
404 super(PrintrbotPage, self).__init__(parent, _("Printrbot Selection"))
405 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Printrbot_logo.png')))
406 self.AddText(_("Select which Printrbot machine you have:"))
408 for printer in self._printer_info:
409 if printer[0].startswith(":"):
411 self.AddText(printer[0][1:])
413 item = self.AddRadioButton(printer[0])
414 item.data = printer[1:]
415 self._items.append(item)
418 profile.putMachineSetting('machine_name', 'Printrbot ???')
419 for item in self._items:
422 profile.putMachineSetting('machine_name', 'Printrbot ' + item.GetLabel())
423 profile.putMachineSetting('machine_width', data[0])
424 profile.putMachineSetting('machine_depth', data[1])
425 profile.putMachineSetting('machine_height', data[2])
426 profile.putProfileSetting('nozzle_size', data[3])
427 profile.putProfileSetting('filament_diameter', data[4])
428 profile.putProfileSetting('print_temperature', data[5])
429 profile.putProfileSetting('print_speed', data[6])
430 profile.putProfileSetting('travel_speed', data[7])
431 profile.putProfileSetting('retraction_speed', data[8])
432 profile.putProfileSetting('retraction_amount', data[9])
433 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
434 profile.putMachineSetting('has_heated_bed', 'False')
435 profile.putMachineSetting('machine_center_is_zero', 'False')
436 profile.putMachineSetting('extruder_head_size_min_x', '0')
437 profile.putMachineSetting('extruder_head_size_min_y', '0')
438 profile.putMachineSetting('extruder_head_size_max_x', '0')
439 profile.putMachineSetting('extruder_head_size_max_y', '0')
440 profile.putMachineSetting('extruder_head_size_height', '0')
442 profile.setAlterationFile('start.gcode', """;Sliced at: {day} {date} {time}
443 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
444 ;Print time: {print_time}
445 ;Filament used: {filament_amount}m {filament_weight}g
446 ;Filament cost: {filament_cost}
447 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
448 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
450 G90 ;absolute positioning
451 M82 ;set extruder to absolute mode
452 M107 ;start with the fan off
453 G28 X0 Y0 ;move X/Y to min endstops
454 G28 Z0 ;move Z to min endstops
455 G29 ;Run the auto bed leveling
456 G1 Z15.0 F{travel_speed} ;move the platform down 15mm
457 G92 E0 ;zero the extruded length
458 G1 F200 E3 ;extrude 3mm of feed stock
459 G92 E0 ;zero the extruded length again
461 ;Put printing message on LCD screen
465 class OtherMachineSelectPage(InfoPage):
466 def __init__(self, parent):
467 super(OtherMachineSelectPage, self).__init__(parent, _("Other machine information"))
468 self.AddText(_("The following pre-defined machine profiles are available"))
469 self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
471 machines = resources.getDefaultMachineProfiles()
473 for filename in machines:
474 name = os.path.splitext(os.path.basename(filename))[0]
475 item = self.AddRadioButton(name)
476 item.filename = filename
477 item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
478 self.options.append(item)
480 item = self.AddRadioButton(_('Custom...'))
482 item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
484 def OnProfileSelect(self, e):
485 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
487 def OnOtherSelect(self, e):
488 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
491 for option in self.options:
492 if option.GetValue():
493 profile.loadProfile(option.filename)
494 profile.loadMachineSettings(option.filename)
496 class OtherMachineInfoPage(InfoPage):
497 def __init__(self, parent):
498 super(OtherMachineInfoPage, self).__init__(parent, _("Cura Ready!"))
499 self.AddText(_("Cura is now ready to be used!"))
501 class CustomRepRapInfoPage(InfoPage):
502 def __init__(self, parent):
503 super(CustomRepRapInfoPage, self).__init__(parent, _("Custom RepRap information"))
504 self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
505 self.AddText(_("Be sure to review the default profile before running it on your machine."))
506 self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
508 self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
510 self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
511 self.machineWidth = self.AddLabelTextCtrl(_("Machine width X (mm)"), "80")
512 self.machineDepth = self.AddLabelTextCtrl(_("Machine depth Y (mm)"), "80")
513 self.machineHeight = self.AddLabelTextCtrl(_("Machine height Z (mm)"), "55")
514 self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
515 self.heatedBed = self.AddCheckbox(_("Heated bed"))
516 self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
519 profile.putMachineSetting('machine_name', self.machineName.GetValue())
520 profile.putMachineSetting('machine_width', self.machineWidth.GetValue())
521 profile.putMachineSetting('machine_depth', self.machineDepth.GetValue())
522 profile.putMachineSetting('machine_height', self.machineHeight.GetValue())
523 profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
524 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
525 profile.putMachineSetting('has_heated_bed', str(self.heatedBed.GetValue()))
526 profile.putMachineSetting('machine_center_is_zero', str(self.HomeAtCenter.GetValue()))
527 profile.putMachineSetting('extruder_head_size_min_x', '0')
528 profile.putMachineSetting('extruder_head_size_min_y', '0')
529 profile.putMachineSetting('extruder_head_size_max_x', '0')
530 profile.putMachineSetting('extruder_head_size_max_y', '0')
531 profile.putMachineSetting('extruder_head_size_height', '0')
532 profile.checkAndUpdateMachineName()
534 class MachineSelectPage(InfoPage):
535 def __init__(self, parent):
536 super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
537 self.AddText(_("What kind of machine do you have:"))
539 self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2")
540 self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
541 self.Ultimaker2ExtRadio = self.AddRadioButton("Ultimaker2extended")
542 self.Ultimaker2ExtRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
543 self.Ultimaker2GoRadio = self.AddRadioButton("Ultimaker2go")
544 self.Ultimaker2GoRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
545 self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
546 self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
547 self.UltimakerOPRadio = self.AddRadioButton("Ultimaker Original+")
548 self.UltimakerOPRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerOPSelect)
549 self.PrintrbotRadio = self.AddRadioButton("Printrbot")
550 self.PrintrbotRadio.Bind(wx.EVT_RADIOBUTTON, self.OnPrintrbotSelect)
551 self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot, Witbox)"))
552 self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
554 def OnUltimaker2Select(self, e):
555 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
557 def OnUltimakerSelect(self, e):
558 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
560 def OnUltimakerOPSelect(self, e):
561 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerFirmwareUpgradePage)
563 def OnPrintrbotSelect(self, e):
564 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().printrbotSelectType)
566 def OnOtherSelect(self, e):
567 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
570 profile.putProfileSetting('retraction_enable', 'True')
571 if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
572 if self.Ultimaker2Radio.GetValue():
573 profile.putMachineSetting('machine_width', '230')
574 profile.putMachineSetting('machine_depth', '225')
575 profile.putMachineSetting('machine_height', '205')
576 profile.putMachineSetting('machine_name', 'ultimaker2')
577 profile.putMachineSetting('machine_type', 'ultimaker2')
578 profile.putMachineSetting('has_heated_bed', 'True')
579 if self.Ultimaker2GoRadio.GetValue():
580 profile.putMachineSetting('machine_width', '120')
581 profile.putMachineSetting('machine_depth', '120')
582 profile.putMachineSetting('machine_height', '115')
583 profile.putMachineSetting('machine_name', 'ultimaker2go')
584 profile.putMachineSetting('machine_type', 'ultimaker2go')
585 profile.putMachineSetting('has_heated_bed', 'False')
586 if self.Ultimaker2ExtRadio.GetValue():
587 profile.putMachineSetting('machine_width', '230')
588 profile.putMachineSetting('machine_depth', '225')
589 profile.putMachineSetting('machine_height', '315')
590 profile.putMachineSetting('machine_name', 'ultimaker2extended')
591 profile.putMachineSetting('machine_type', 'ultimaker2extended')
592 profile.putMachineSetting('has_heated_bed', 'False')
593 profile.putMachineSetting('machine_center_is_zero', 'False')
594 profile.putMachineSetting('gcode_flavor', 'UltiGCode')
595 profile.putMachineSetting('extruder_head_size_min_x', '40.0')
596 profile.putMachineSetting('extruder_head_size_min_y', '10.0')
597 profile.putMachineSetting('extruder_head_size_max_x', '60.0')
598 profile.putMachineSetting('extruder_head_size_max_y', '30.0')
599 profile.putMachineSetting('extruder_head_size_height', '48.0')
600 profile.putProfileSetting('nozzle_size', '0.4')
601 profile.putProfileSetting('fan_full_height', '5.0')
602 profile.putMachineSetting('extruder_offset_x1', '18.0')
603 profile.putMachineSetting('extruder_offset_y1', '0.0')
604 elif self.UltimakerRadio.GetValue():
605 profile.putMachineSetting('machine_width', '205')
606 profile.putMachineSetting('machine_depth', '205')
607 profile.putMachineSetting('machine_height', '200')
608 profile.putMachineSetting('machine_name', 'ultimaker original')
609 profile.putMachineSetting('machine_type', 'ultimaker')
610 profile.putMachineSetting('machine_center_is_zero', 'False')
611 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
612 profile.putProfileSetting('nozzle_size', '0.4')
613 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
614 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
615 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
616 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
617 profile.putMachineSetting('extruder_head_size_height', '55.0')
618 elif self.UltimakerOPRadio.GetValue():
619 profile.putMachineSetting('machine_width', '205')
620 profile.putMachineSetting('machine_depth', '205')
621 profile.putMachineSetting('machine_height', '200')
622 profile.putMachineSetting('machine_name', 'ultimaker original+')
623 profile.putMachineSetting('machine_type', 'ultimaker_plus')
624 profile.putMachineSetting('machine_center_is_zero', 'False')
625 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
626 profile.putProfileSetting('nozzle_size', '0.4')
627 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
628 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
629 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
630 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
631 profile.putMachineSetting('extruder_head_size_height', '55.0')
632 profile.putMachineSetting('has_heated_bed', 'True')
633 profile.putMachineSetting('extruder_amount', '1')
634 profile.putProfileSetting('retraction_enable', 'True')
636 profile.putMachineSetting('machine_width', '80')
637 profile.putMachineSetting('machine_depth', '80')
638 profile.putMachineSetting('machine_height', '60')
639 profile.putMachineSetting('machine_name', 'reprap')
640 profile.putMachineSetting('machine_type', 'reprap')
641 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
642 profile.putPreference('startMode', 'Normal')
643 profile.putProfileSetting('nozzle_size', '0.5')
644 profile.checkAndUpdateMachineName()
645 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
647 class SelectParts(InfoPage):
648 def __init__(self, parent):
649 super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
650 self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
652 self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
653 self.heatedBedKit = self.AddCheckbox(_("Heated printer bed (kit)"))
654 self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
655 self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
657 self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
658 self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
659 self.springExtruder.SetValue(True)
662 profile.putMachineSetting('ultimaker_extruder_upgrade', str(self.springExtruder.GetValue()))
663 if self.heatedBed.GetValue() or self.heatedBedKit.GetValue():
664 profile.putMachineSetting('has_heated_bed', 'True')
666 profile.putMachineSetting('has_heated_bed', 'False')
667 if self.dualExtrusion.GetValue():
668 profile.putMachineSetting('extruder_amount', '2')
669 profile.putMachineSetting('machine_depth', '195')
671 profile.putMachineSetting('extruder_amount', '1')
672 if profile.getMachineSetting('ultimaker_extruder_upgrade') == 'True':
673 profile.putProfileSetting('retraction_enable', 'True')
675 profile.putProfileSetting('retraction_enable', 'False')
678 class UltimakerFirmwareUpgradePage(InfoPage):
679 def __init__(self, parent):
680 super(UltimakerFirmwareUpgradePage, self).__init__(parent, _("Upgrade Ultimaker Firmware"))
681 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the stepper motors, regulates the temperature\nand ultimately makes your printer work."))
682 self.AddHiddenSeperator()
683 self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
684 self.AddHiddenSeperator()
685 self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
686 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Upgrade to Marlin firmware'), _('Skip upgrade'))
687 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
688 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
689 self.AddHiddenSeperator()
690 if profile.getMachineSetting('machine_type') == 'ultimaker':
691 self.AddText(_("Do not upgrade to this firmware if:"))
692 self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
693 self.AddText(_("* Build your own heated bed"))
694 self.AddText(_("* Have other changes in the firmware"))
695 # button = self.AddButton('Goto this page for a custom firmware')
696 # button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
701 def OnUpgradeClick(self, e):
702 if firmwareInstall.InstallFirmware():
703 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
705 def OnSkipClick(self, e):
706 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
707 self.GetParent().ShowPage(self.GetNext())
709 def OnUrlClick(self, e):
710 webbrowser.open('http://marlinbuilder.robotfuzz.com/')
712 class UltimakerCheckupPage(InfoPage):
713 def __init__(self, parent):
714 super(UltimakerCheckupPage, self).__init__(parent, _("Ultimaker Checkup"))
716 self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
717 self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
718 self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
719 self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
720 self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
721 self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
722 self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
723 self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
724 self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
725 self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
728 _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
729 b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
730 b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
731 b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
733 self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
734 self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
735 self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
737 self.infoBox = self.AddInfoBox()
738 self.machineState = self.AddText("")
739 self.temperatureLabel = self.AddText("")
740 self.errorLogButton = self.AddButton(_("Show error log"))
741 self.errorLogButton.Show(False)
743 self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
745 self.xMinStop = False
746 self.xMaxStop = False
747 self.yMinStop = False
748 self.yMaxStop = False
749 self.zMinStop = False
750 self.zMaxStop = False
752 self.Bind(wx.EVT_BUTTON, self.OnErrorLog, self.errorLogButton)
755 if self.comm is not None:
759 self.endstopBitmap.Show(False)
762 def OnSkipClick(self, e):
763 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
764 self.GetParent().ShowPage(self.GetNext())
766 def OnCheckClick(self, e=None):
767 self.errorLogButton.Show(False)
768 if self.comm is not None:
772 wx.CallAfter(self.OnCheckClick)
774 self.infoBox.SetBusy(_("Connecting to machine."))
775 self.commState.SetBitmap(self.unknownBitmap)
776 self.tempState.SetBitmap(self.unknownBitmap)
777 self.stopState.SetBitmap(self.unknownBitmap)
778 self.checkupState = 0
779 self.checkExtruderNr = 0
780 self.comm = machineCom.MachineCom(callbackObject=self)
782 def OnErrorLog(self, e):
783 printWindow.LogWindow('\n'.join(self.comm.getLog()))
785 def mcLog(self, message):
788 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
789 if not self.comm.isOperational():
791 if self.checkupState == 0:
792 self.tempCheckTimeout = 20
793 if temp[self.checkExtruderNr] > 70:
794 self.checkupState = 1
795 wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
796 self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
797 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
799 self.startTemp = temp[self.checkExtruderNr]
800 self.checkupState = 2
801 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
802 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
803 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
804 elif self.checkupState == 1:
805 if temp[self.checkExtruderNr] < 60:
806 self.startTemp = temp[self.checkExtruderNr]
807 self.checkupState = 2
808 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
809 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
810 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
811 elif self.checkupState == 2:
812 #print "WARNING, TEMPERATURE TEST DISABLED FOR TESTING!"
813 if temp[self.checkExtruderNr] > self.startTemp + 40:
814 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
815 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
816 if self.checkExtruderNr < int(profile.getMachineSetting('extruder_amount')):
817 self.checkExtruderNr = 0
818 self.checkupState = 3
819 wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
820 wx.CallAfter(self.endstopBitmap.Show, True)
821 wx.CallAfter(self.Layout)
822 self.comm.sendCommand('M119')
823 wx.CallAfter(self.tempState.SetBitmap, self.checkBitmap)
825 self.checkupState = 0
826 self.checkExtruderNr += 1
828 self.tempCheckTimeout -= 1
829 if self.tempCheckTimeout < 1:
830 self.checkupState = -1
831 wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
832 wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
833 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
834 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
835 elif self.checkupState >= 3 and self.checkupState < 10:
836 self.comm.sendCommand('M119')
837 wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
839 def mcStateChange(self, state):
840 if self.comm is None:
842 if self.comm.isOperational():
843 wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
844 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
845 elif self.comm.isError():
846 wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
847 wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
848 wx.CallAfter(self.endstopBitmap.Show, False)
849 wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
850 wx.CallAfter(self.errorLogButton.Show, True)
851 wx.CallAfter(self.Layout)
853 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
855 def mcMessage(self, message):
856 if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
857 for data in message.split(' '):
859 tag, value = data.split(':', 1)
861 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
863 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
865 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
867 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
869 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
871 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
873 tag, value = map(str.strip, message.split(':', 1))
875 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
877 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
879 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
881 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
883 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
885 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
886 if 'z_max' in message:
887 self.comm.sendCommand('M119')
889 if self.checkupState == 3:
890 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
891 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
892 self.checkupState = 5
893 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
894 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
896 self.checkupState = 4
897 wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
898 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
899 elif self.checkupState == 4:
900 if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
901 self.checkupState = 5
902 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
903 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
904 elif self.checkupState == 5:
905 if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
906 self.checkupState = 6
907 wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
908 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
909 elif self.checkupState == 6:
910 if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
911 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
912 self.checkupState = 8
913 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
914 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
916 self.checkupState = 7
917 wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
918 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
919 elif self.checkupState == 7:
920 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
921 self.checkupState = 8
922 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
923 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
924 elif self.checkupState == 8:
925 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
926 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
927 self.checkupState = 10
929 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
930 wx.CallAfter(self.infoBox.SetReadyIndicator)
931 wx.CallAfter(self.endstopBitmap.Show, False)
932 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
933 wx.CallAfter(self.OnSkipClick, None)
935 self.checkupState = 9
936 wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
937 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
938 elif self.checkupState == 9:
939 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
940 self.checkupState = 10
942 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
943 wx.CallAfter(self.infoBox.SetReadyIndicator)
944 wx.CallAfter(self.endstopBitmap.Show, False)
945 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
946 wx.CallAfter(self.OnSkipClick, None)
948 def mcProgress(self, lineNr):
951 def mcZChange(self, newZ):
955 class UltimakerCalibrationPage(InfoPage):
956 def __init__(self, parent):
957 super(UltimakerCalibrationPage, self).__init__(parent, _("Ultimaker Calibration"))
959 self.AddText("Your Ultimaker requires some calibration.")
960 self.AddText("This calibration is needed for a proper extrusion amount.")
962 self.AddText("The following values are needed:")
963 self.AddText("* Diameter of filament")
964 self.AddText("* Number of steps per mm of filament extrusion")
966 self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
968 self.AddText("First we need the diameter of your filament:")
969 self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
971 "If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
972 self.AddText("Note: This value can be changed later at any time.")
975 profile.putProfileSetting('filament_diameter', self.filamentDiameter.GetValue())
978 class UltimakerCalibrateStepsPerEPage(InfoPage):
979 def __init__(self, parent):
980 super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, _("Ultimaker Calibration"))
982 #if profile.getMachineSetting('steps_per_e') == '0':
983 # profile.putMachineSetting('steps_per_e', '865.888')
985 self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
986 self.AddText(_("First remove any filament from your machine."))
987 self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
988 self.AddText(_("We'll push the filament 100mm"))
989 self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
990 self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
991 self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
992 self.AddText(_("This results in the following steps per E:"))
993 self.stepsPerEInput = self.AddTextCtrl(profile.getMachineSetting('steps_per_e'))
994 self.AddText(_("You can repeat these steps to get better calibration."))
997 _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
998 self.heatButton = self.AddButton(_("Heatup for filament removal"))
1000 self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
1001 self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
1002 self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)
1004 def OnSaveLengthClick(self, e):
1005 currentEValue = float(self.stepsPerEInput.GetValue())
1006 realExtrudeLength = float(self.lengthInput.GetValue())
1007 newEValue = currentEValue * 100 / realExtrudeLength
1008 self.stepsPerEInput.SetValue(str(newEValue))
1009 self.lengthInput.SetValue("100")
1011 def OnExtrudeClick(self, e):
1012 t = threading.Thread(target=self.OnExtrudeRun)
1016 def OnExtrudeRun(self):
1017 self.heatButton.Enable(False)
1018 self.extrudeButton.Enable(False)
1019 currentEValue = float(self.stepsPerEInput.GetValue())
1020 self.comm = machineCom.MachineCom()
1021 if not self.comm.isOpen():
1023 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1024 'Printer error', wx.OK | wx.ICON_INFORMATION)
1025 self.heatButton.Enable(True)
1026 self.extrudeButton.Enable(True)
1029 line = self.comm.readline()
1034 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1037 self.sendGCommand('M302') #Disable cold extrusion protection
1038 self.sendGCommand("M92 E%f" % (currentEValue))
1039 self.sendGCommand("G92 E0")
1040 self.sendGCommand("G1 E100 F600")
1043 self.extrudeButton.Enable()
1044 self.heatButton.Enable()
1046 def OnHeatClick(self, e):
1047 t = threading.Thread(target=self.OnHeatRun)
1051 def OnHeatRun(self):
1052 self.heatButton.Enable(False)
1053 self.extrudeButton.Enable(False)
1054 self.comm = machineCom.MachineCom()
1055 if not self.comm.isOpen():
1057 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1058 'Printer error', wx.OK | wx.ICON_INFORMATION)
1059 self.heatButton.Enable(True)
1060 self.extrudeButton.Enable(True)
1063 line = self.comm.readline()
1065 self.heatButton.Enable(True)
1066 self.extrudeButton.Enable(True)
1070 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1073 self.sendGCommand('M104 S200') #Set the temperature to 200C, should be enough to get PLA and ABS out.
1075 'Wait till you can remove the filament from the machine, and press OK.\n(Temperature is set to 200C)',
1076 'Machine heatup', wx.OK | wx.ICON_INFORMATION)
1077 self.sendGCommand('M104 S0')
1080 self.heatButton.Enable(True)
1081 self.extrudeButton.Enable(True)
1083 def sendGCommand(self, cmd):
1084 self.comm.sendCommand(cmd) #Disable cold extrusion protection
1086 line = self.comm.readline()
1089 if line.startswith('ok'):
1092 def StoreData(self):
1093 profile.putPreference('steps_per_e', self.stepsPerEInput.GetValue())
1095 class Ultimaker2ReadyPage(InfoPage):
1096 def __init__(self, parent):
1097 super(Ultimaker2ReadyPage, self).__init__(parent, _("Ultimaker2"))
1098 self.AddText(_('Congratulations on your the purchase of your brand new Ultimaker2.'))
1099 self.AddText(_('Cura is now ready to be used with your Ultimaker2.'))
1102 class LulzbotMachineSelectPage(InfoPage):
1106 def __init__(self, parent):
1107 super(LulzbotMachineSelectPage, self).__init__(parent, _("Select your machine"))
1109 self.panel = self.AddPanel()
1111 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1112 self.LulzbotMini = self.AddImageButton(self.panel, 0, 0, _("LulzBot Mini"),
1113 'Lulzbot_mini.jpg', image_size, style=ImageButton.IB_GROUP)
1114 self.LulzbotMini.OnSelected(self.OnLulzbotMiniSelected)
1116 self.LulzbotTaz6 = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 6"),
1117 'Lulzbot_TAZ6.jpg', image_size)
1118 self.LulzbotTaz6.OnSelected(self.OnLulzbotTaz6Selected)
1120 self.LulzbotTaz = self.AddImageButton(self.panel, 1, 0, _("LulzBot TAZ 4 or 5"),
1121 'Lulzbot_TAZ5.jpg', image_size)
1122 self.LulzbotTaz.OnSelected(self.OnLulzbotTazSelected)
1124 self.OtherPrinters = self.AddImageButton(self.panel, 1, 1, _("Other Printers"),
1125 'Generic-3D-Printer.png', image_size)
1126 self.OtherPrinters.OnSelected(self.OnOthersSelected)
1127 self.LulzbotMini.SetValue(True)
1129 def OnPageShown(self):
1130 self.LulzbotMini.TriggerGroupCallbacks()
1132 def OnOthersSelected(self):
1133 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().machineSelectPage)
1135 def OnLulzbotMiniSelected(self):
1136 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotMiniToolheadPage)
1137 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotMiniToolheadPage,
1138 self.GetParent().lulzbotReadyPage)
1140 def OnLulzbotTaz6Selected(self):
1141 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().LulzbotTaz6ToolheadSelectPage)
1143 def OnLulzbotTazSelected(self):
1144 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazSelectPage)
1146 def AllowNext(self):
1149 def AllowBack(self):
1152 def StoreData(self):
1153 if self.LulzbotTaz.GetValue() or self.LulzbotMini.GetValue() or self.LulzbotTaz6.GetValue():
1154 if self.LulzbotTaz.GetValue():
1155 profile.putMachineSetting('machine_width', '290')
1156 profile.putMachineSetting('machine_depth', '275')
1157 profile.putMachineSetting('machine_height', '250')
1158 profile.putMachineSetting('serial_baud', '115200')
1159 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
1160 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
1161 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
1162 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
1163 profile.putMachineSetting('extruder_head_size_height', '0.0')
1164 elif self.LulzbotTaz6.GetValue():
1165 profile.putMachineSetting('machine_width', '280')
1166 profile.putMachineSetting('machine_depth', '280')
1167 profile.putMachineSetting('machine_height', '250')
1168 profile.putMachineSetting('serial_baud', '250000')
1169 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
1170 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
1171 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
1172 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
1173 profile.putMachineSetting('extruder_head_size_height', '0.0')
1175 # Nozzle diameter and machine type will be set in the toolhead selection page
1176 profile.putMachineSetting('machine_name', 'LulzBot Mini')
1177 profile.putMachineSetting('machine_width', '155')
1178 profile.putMachineSetting('machine_depth', '155')
1179 profile.putMachineSetting('machine_height', '158')
1180 profile.putMachineSetting('serial_baud', '115200')
1181 profile.putMachineSetting('extruder_head_size_min_x', '40')
1182 profile.putMachineSetting('extruder_head_size_max_x', '75')
1183 profile.putMachineSetting('extruder_head_size_min_y', '25')
1184 profile.putMachineSetting('extruder_head_size_max_y', '55')
1185 profile.putMachineSetting('extruder_head_size_height', '17')
1187 profile.putMachineSetting('machine_center_is_zero', 'False')
1188 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
1189 profile.putMachineSetting('has_heated_bed', 'True')
1190 profile.putProfileSetting('retraction_enable', 'True')
1191 profile.putPreference('startMode', 'Simple')
1192 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
1193 profile.checkAndUpdateMachineName()
1195 class LulzbotReadyPage(InfoPage):
1196 def __init__(self, parent):
1197 super(LulzbotReadyPage, self).__init__(parent, _("LulzBot TAZ/Mini"))
1198 self.AddText(_('Cura is now ready to be used with your LulzBot 3D printer.'))
1200 self.AddText(_('For more information about using Cura with your LulzBot'))
1201 self.AddText(_('3D printer, please visit www.LulzBot.com/cura'))
1204 class LulzbotMiniToolheadSelectPage(InfoPage):
1205 def __init__(self, parent, allowBack = True):
1206 super(LulzbotMiniToolheadSelectPage, self).__init__(parent, _("LulzBot Mini Tool Head Selection"))
1208 self.allowBack = allowBack
1209 self.panel = self.AddPanel()
1210 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1211 self.standard = self.AddImageButton(self.panel, 0, 0, _('Standard LulzBot Mini'),
1212 'Lulzbot_mini.jpg', image_size,
1213 style=ImageButton.IB_GROUP)
1214 self.flexy = self.AddImageButton(self.panel, 0, 1, _('LulzBot Mini with Flexystruder'),
1215 'Lulzbot_Toolhead_Mini_Flexystruder.jpg', image_size)
1216 self.standard.SetValue(True)
1218 def AllowBack(self):
1219 return self.allowBack
1221 def StoreData(self):
1222 if self.standard.GetValue():
1223 profile.putProfileSetting('nozzle_size', '0.5')
1224 profile.putMachineSetting('extruder_amount', '1')
1225 profile.putMachineSetting('toolhead', 'Single Extruder v2')
1226 profile.putMachineSetting('toolhead_shortname', '')
1227 profile.putMachineSetting('machine_type', 'lulzbot_mini')
1229 profile.putProfileSetting('nozzle_size', '0.6')
1230 profile.putMachineSetting('extruder_amount', '1')
1231 profile.putMachineSetting('toolhead', 'Flexystruder v2')
1232 profile.putMachineSetting('toolhead_shortname', 'Flexystruder')
1233 profile.putMachineSetting('machine_type', 'lulzbot_mini_flexystruder')
1235 class LulzbotTaz6ToolheadSelectPage(InfoPage):
1236 def __init__(self, parent, allowBack = True):
1237 super(LulzbotTaz6ToolheadSelectPage, self).__init__(parent, _("LulzBot TAZ 6 Tool Head Selection"))
1239 self.panel = self.AddPanel()
1240 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1241 self.taz6 = self.AddImageButton(self.panel, 0, 0, _('Tilapia'),
1242 'Lulzbot_Toolhead_TAZ_Tilapia.jpg', image_size,
1243 style=ImageButton.IB_GROUP)
1244 self.taz6.OnSelected(self.OnTilapiaSelected)
1245 self.taz6.SetValue(True)
1247 def OnPageShown(self):
1248 self.taz6.TriggerGroupCallbacks()
1250 def OnTilapiaSelected(self):
1251 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1253 def StoreData(self):
1254 profile.putProfileSetting('nozzle_size', '0.5')
1255 profile.putMachineSetting('extruder_amount', '1')
1256 profile.putMachineSetting('toolhead', 'Single Extruder Tilapia')
1257 profile.putMachineSetting('toolhead_shortname', 'Tilapia')
1258 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_6_Single_Tilapia')
1259 profile.putMachineSetting('machine_name', 'LulzBot TAZ 6')
1261 class LulzbotTazSelectPage(InfoPage):
1262 def __init__(self, parent):
1263 super(LulzbotTazSelectPage, self).__init__(parent, _("LulzBot TAZ 4-5 Selection"))
1265 self.panel = self.AddPanel()
1266 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1267 self.taz5 = self.AddImageButton(self.panel, 0, 0, _('Stock TAZ 5 (PEI && v2)'),
1268 'Lulzbot_TAZ_5_Hex_and_PEI.jpg', image_size,
1269 style=ImageButton.IB_GROUP)
1270 self.taz5.OnSelected(self.OnTaz5Selected)
1271 self.taz4 = self.AddImageButton(self.panel, 0, 1, _('Stock TAZ 4 (PET && v1)'),
1272 'Lulzbot_TAZ_4_Buda_and_PET.jpg', image_size)
1273 self.taz4.OnSelected(self.OnTaz4Selected)
1274 self.modified = self.AddImageButton(self.panel, 1, 0, _('Modified LulzBot TAZ 4 or 5'),
1275 'Lulzbot_TAZ5.jpg', image_size)
1276 self.modified.OnSelected(self.OnModifiedSelected)
1277 self.taz5.SetValue(True)
1279 def OnPageShown(self):
1280 self.taz5.TriggerGroupCallbacks()
1282 def OnTaz5Selected(self):
1283 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1284 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage,
1285 self.GetParent().lulzbotReadyPage)
1287 def OnTaz4Selected(self):
1288 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1290 def OnModifiedSelected(self):
1291 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazBedSelectPage)
1292 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTazBedSelectPage,
1293 self.GetParent().lulzbotTazHotendPage)
1295 def StoreData(self):
1296 if self.taz5.GetValue():
1297 profile.putProfileSetting('nozzle_size', '0.5')
1298 profile.putMachineSetting('extruder_amount', '1')
1299 profile.putMachineSetting('toolhead', 'Single Extruder V2')
1300 profile.putMachineSetting('toolhead_shortname', '')
1301 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5_SingleV2')
1302 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1303 elif self.taz4.GetValue():
1304 profile.putProfileSetting('nozzle_size', '0.35')
1305 profile.putMachineSetting('extruder_amount', '1')
1306 profile.putMachineSetting('toolhead', 'Single Extruder V1')
1307 profile.putMachineSetting('toolhead_shortname', '')
1308 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4_SingleV1')
1309 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1311 class LulzbotTazBedSelectPage(InfoPage):
1312 def __init__(self, parent):
1313 super(LulzbotTazBedSelectPage, self).__init__(parent, _("Bed Surface"))
1315 self.panel = self.AddPanel()
1316 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1317 self.pei = self.AddImageButton(self.panel, 0, 0, _('PEI'),
1318 'Lulzbot_TAZ_PEI_Bed.jpg', image_size,
1319 style=ImageButton.IB_GROUP)
1320 self.pet = self.AddImageButton(self.panel, 0, 1, _('PET'),
1321 'Lulzbot_TAZ_PET_Bed.jpg', image_size)
1322 self.pei.SetValue(True)
1324 def StoreData(self):
1325 if self.pei.GetValue():
1326 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
1327 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1329 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4')
1330 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1332 class LulzbotTazToolheadSelectPage(InfoPage):
1333 def __init__(self, parent):
1334 super(LulzbotTazToolheadSelectPage, self).__init__(parent, _("LulzBot TAZ Tool Head Selection"))
1336 self.panel = self.AddPanel()
1337 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1338 self.single = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v1'),
1339 'Lulzbot_Toolhead_TAZ_Single_v1.jpg', image_size,
1340 style=ImageButton.IB_GROUP)
1341 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v1'),
1342 'Lulzbot_Toolhead_TAZ_Flexystruder_v1.jpg', image_size)
1343 self.dually = self.AddImageButton(self.panel, 1, 0, _('Dual Extruder v1'),
1344 'Lulzbot_Toolhead_TAZ_Dual_Extruder_v1.jpg', image_size)
1345 self.flexydually = self.AddImageButton(self.panel, 1, 1, _('FlexyDually v1'),
1346 'Lulzbot_Toolhead_TAZ_FlexyDually_v1.jpg', image_size)
1348 self.single.SetValue(True)
1350 def SetVersion(self, version):
1351 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1352 self.single.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Single_v%d.jpg' % version, image_size))
1353 self.single.SetLabel(_('Single Extruder v%d' % version))
1354 self.flexy.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Flexystruder_v%d.jpg' % version, image_size))
1355 self.flexy.SetLabel(_('Flexystruder v%d' % version))
1356 self.dually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Dual_Extruder_v%d.jpg' % version, image_size))
1357 self.dually.SetLabel(_('Dual Extruder v%d' % version))
1358 self.flexydually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_FlexyDually_v%d.jpg' % version, image_size))
1359 self.flexydually.SetLabel(_('FlexyDually v%d' % version))
1360 self.version = version
1362 self.single.OnSelected(None)
1363 self.flexy.OnSelected(None)
1364 self.dually.OnSelected(None)
1365 self.flexydually.OnSelected(None)
1366 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1368 self.single.OnSelected(self.OnSingleV2)
1369 self.flexy.OnSelected(self.OnNonSingle)
1370 self.dually.OnSelected(self.OnNonSingle)
1371 self.flexydually.OnSelected(self.OnNonSingle)
1372 if self.single.GetValue():
1373 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1374 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1376 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1377 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotFirmwarePage, self.GetParent().lulzbotReadyPage)
1379 def OnSingleV2(self):
1380 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1381 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1383 def OnNonSingle(self):
1384 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1386 def StoreData(self):
1387 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1391 version = (taz_version, self.version)
1392 if self.single.GetValue():
1393 profile.putProfileSetting('nozzle_size', '0.5' if self.version == 2 else '0.35')
1394 profile.putMachineSetting('extruder_amount', '1')
1395 profile.putMachineSetting('toolhead', 'Single Extruder V%d' % self.version)
1396 profile.putMachineSetting('toolhead_shortname', '')
1397 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_SingleV%d' % version)
1398 elif self.flexy.GetValue():
1399 profile.putProfileSetting('nozzle_size', '0.6')
1400 profile.putMachineSetting('extruder_amount', '1')
1401 profile.putMachineSetting('toolhead', 'Flexystruder V%d' % self.version)
1402 profile.putMachineSetting('toolhead_shortname', 'Flexystruder v%d' % self.version)
1403 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexystruderV%d' % version)
1404 elif self.dually.GetValue():
1405 profile.putProfileSetting('nozzle_size', '0.5')
1406 profile.putMachineSetting('extruder_amount', '2')
1407 profile.putMachineSetting('extruder_offset_x1', '0.0')
1408 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1409 profile.putMachineSetting('toolhead', 'Dual Extruder V%d' % self.version)
1410 profile.putMachineSetting('toolhead_shortname', 'Dual v%d' % self.version)
1411 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_DualV%d' % version)
1412 elif self.flexydually.GetValue():
1413 profile.putProfileSetting('nozzle_size', '0.6')
1414 profile.putMachineSetting('extruder_amount', '2')
1415 profile.putMachineSetting('extruder_offset_x1', '0.0')
1416 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1417 profile.putMachineSetting('toolhead', 'FlexyDually V%d' % self.version)
1418 profile.putMachineSetting('toolhead_shortname', 'FlexyDually v%d' % self.version)
1419 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexyDuallyV%d' % version)
1421 class LulzbotHotendSelectPage(InfoPage):
1422 def __init__(self, parent, allowBack = True):
1423 super(LulzbotHotendSelectPage, self).__init__(parent, _("LulzBot Tool Head Hot end Selection"))
1425 self.allowBack = allowBack
1426 self.panel = self.AddPanel()
1427 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1428 self.v1 = self.AddImageButton(self.panel, 0, 0, _('v1 (Budaschnozzle)'),
1429 'Lulzbot_Toolhead_v1.jpg', image_size,
1430 style=ImageButton.IB_GROUP)
1431 self.v2 = self.AddImageButton(self.panel, 0, 1, _('v2 (LulzBot Hexagon)'),
1432 'Lulzbot_Toolhead_v2.jpg', image_size)
1433 self.v1.SetValue(True)
1435 def AllowBack(self):
1436 return self.allowBack
1438 def StoreData(self):
1439 self.GetParent().lulzbotTazToolheadPage.SetVersion(1 if self.v1.GetValue() else 2)
1441 class LulzbotTaz5NozzleSelectPage(InfoPage):
1442 url2='http://lulzbot.com/printer-identification'
1444 def __init__(self, parent):
1445 super(LulzbotTaz5NozzleSelectPage, self).__init__(parent, _("LulzBot TAZ Single v2 Nozzle Selection"))
1447 self.AddText(_('Please select your LulzBot Hexagon Hot End\'s nozzle diameter:'))
1448 self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
1449 self.Nozzle35Radio.SetValue(True)
1450 self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
1451 self.AddText(_(' '))
1454 self.AddText(_('If you are not sure which nozzle diameter you have,'))
1455 self.AddText(_('please check this webpage: '))
1456 button = self.AddButton(LulzbotTaz5NozzleSelectPage.url2)
1457 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1459 def OnUrlClick(self, e):
1460 webbrowser.open(LulzbotTaz5NozzleSelectPage.url2)
1462 def StoreData(self):
1463 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1467 if self.Nozzle35Radio.GetValue():
1468 profile.putProfileSetting('nozzle_size', '0.35')
1469 profile.putMachineSetting('toolhead', 'Single Extruder v2 (0.35mm nozzle)')
1470 profile.putMachineSetting('toolhead_shortname', '0.35 nozzle')
1471 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_035nozzle' % taz_version)
1474 profile.putProfileSetting('nozzle_size', '0.5')
1475 profile.putMachineSetting('toolhead', 'Single Extruder v2 (0.5mm nozzle)')
1476 profile.putMachineSetting('toolhead_shortname', '0.5 nozzle')
1477 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_05nozzle' % taz_version)
1479 class LulzbotFirmwareUpdatePage(InfoPage):
1480 def __init__(self, parent):
1481 super(LulzbotFirmwareUpdatePage, self).__init__(parent, _("LulzBot Firmware Update"))
1483 self.AddText(_("Your LulzBot printer\'s firmware will now be updated.\n" +
1484 "Note: this will overwrite your existing firmware."))
1486 self.AddText(_("Follow these steps to prevent writing firmware to the wrong device:\n" +
1487 " 1) Unplug all USB devices from your computer\n" +
1488 " 2) Plug your 3D Printer into the computer with a USB cable\n" +
1489 " 3) Turn on your 3D Printer\n" +
1490 " 4) Click \"Flash the firmware\""))
1491 self.AddHiddenSeperator()
1492 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Flash the firmware'), _('Skip upgrade'))
1493 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
1494 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
1496 def AllowNext(self):
1497 return version.isDevVersion()
1499 def OnUpgradeClick(self, e):
1500 if firmwareInstall.InstallFirmware():
1501 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1502 self.GetParent().ShowPage(self.GetNext())
1504 def OnSkipClick(self, e):
1505 dlg = wx.MessageDialog(self,
1506 _("CAUTION: Updating firmware is necessary when changing the\n" \
1507 "tool head on your LulzBot desktop 3D Printer." \
1509 "Are you sure you want to skip the firmware update?"),
1510 _('Skip firmware update?'),
1511 wx.YES_NO | wx.ICON_EXCLAMATION)
1512 skip = dlg.ShowModal() == wx.ID_YES
1515 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1516 self.GetParent().ShowPage(self.GetNext())
1518 class LulzbotChangeToolheadWizard(wx.wizard.Wizard):
1520 super(LulzbotChangeToolheadWizard, self).__init__(None, -1, _("Change LulzBot Tool Head Wizard"))
1522 self._nozzle_size = profile.getProfileSettingFloat('nozzle_size')
1523 self._machine_name = profile.getMachineSetting('machine_name')
1524 self._machine_type = profile.getMachineSetting('machine_type')
1525 self._extruder_amount = int(profile.getMachineSettingFloat('extruder_amount'))
1527 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1528 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1529 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1531 self.lulzbotReadyPage = LulzbotReadyPage(self)
1532 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1533 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self, False)
1534 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1535 self.lulzbotTaz6ToolheadPage = LulzbotTaz6ToolheadSelectPage(self, False)
1536 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self, False)
1537 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1538 self.lulzbotTazBedSelectPage = LulzbotTazBedSelectPage(self)
1539 self.lulzbotTazSelectPage = LulzbotTazSelectPage(self)
1541 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1542 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1544 if profile.getMachineSetting('machine_type').startswith('lulzbot_mini'):
1545 self.RunWizard(self.lulzbotMiniToolheadPage)
1546 elif profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_5') or \
1547 profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1548 self.RunWizard(self.lulzbotTazHotendPage)
1549 elif profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_6'):
1550 self.RunWizard(self.lulzbotTaz6ToolheadPage)
1553 def OnPageChanging(self, e):
1554 e.GetPage().StoreData()
1556 def OnPageChanged(self, e):
1557 if e.GetPage().AllowNext():
1558 self.FindWindowById(wx.ID_FORWARD).Enable()
1560 self.FindWindowById(wx.ID_FORWARD).Disable()
1561 if e.GetPage().AllowBack():
1562 self.FindWindowById(wx.ID_BACKWARD).Enable()
1564 self.FindWindowById(wx.ID_BACKWARD).Disable()
1565 if hasattr(e.GetPage(), 'OnPageShown'):
1566 e.GetPage().OnPageShown()
1568 def OnCancel(self, e):
1569 profile.putProfileSetting('nozzle_size', self._nozzle_size)
1570 profile.putMachineSetting('machine_name', self._machine_name)
1571 profile.putMachineSetting('machine_type', self._machine_type)
1572 profile.putMachineSetting('extruder_amount', self._extruder_amount)
1574 class ConfigWizard(wx.wizard.Wizard):
1575 def __init__(self, addNew = False):
1576 super(ConfigWizard, self).__init__(None, -1, _("Configuration Wizard"))
1578 self._old_machine_index = int(profile.getPreferenceFloat('active_machine'))
1580 profile.setActiveMachine(profile.getMachineCount())
1582 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1583 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1584 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1586 self.machineSelectPage = MachineSelectPage(self)
1587 self.ultimakerSelectParts = SelectParts(self)
1588 self.ultimakerFirmwareUpgradePage = UltimakerFirmwareUpgradePage(self)
1589 self.ultimakerCheckupPage = UltimakerCheckupPage(self)
1590 self.ultimakerCalibrationPage = UltimakerCalibrationPage(self)
1591 self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
1592 self.bedLevelPage = bedLevelWizardMain(self)
1593 self.headOffsetCalibration = headOffsetCalibrationPage(self)
1594 self.printrbotSelectType = PrintrbotPage(self)
1595 self.otherMachineSelectPage = OtherMachineSelectPage(self)
1596 self.customRepRapInfoPage = CustomRepRapInfoPage(self)
1597 self.otherMachineInfoPage = OtherMachineInfoPage(self)
1599 self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
1600 self.lulzbotReadyPage = LulzbotReadyPage(self)
1601 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1602 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self)
1603 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1604 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self)
1605 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1606 self.lulzbotMachineSelectPage = LulzbotMachineSelectPage(self)
1607 self.lulzbotTazBedSelectPage = LulzbotTazBedSelectPage(self)
1608 self.lulzbotTazSelectPage = LulzbotTazSelectPage(self)
1609 self.lulzbotTaz6ToolheadPage = LulzbotTaz6ToolheadSelectPage(self)
1611 wx.wizard.WizardPageSimple.Chain(self.lulzbotMachineSelectPage, self.lulzbotMiniToolheadPage)
1612 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1613 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1614 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimakerSelectParts)
1615 wx.wizard.WizardPageSimple.Chain(self.ultimakerSelectParts, self.ultimakerFirmwareUpgradePage)
1616 wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
1617 wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
1618 wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
1619 wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
1621 self.RunWizard(self.lulzbotMachineSelectPage)
1624 def OnPageChanging(self, e):
1625 e.GetPage().StoreData()
1627 def OnPageChanged(self, e):
1628 if e.GetPage().AllowNext():
1629 self.FindWindowById(wx.ID_FORWARD).Enable()
1631 self.FindWindowById(wx.ID_FORWARD).Disable()
1632 if e.GetPage().AllowBack():
1633 self.FindWindowById(wx.ID_BACKWARD).Enable()
1635 self.FindWindowById(wx.ID_BACKWARD).Disable()
1636 if hasattr(e.GetPage(), 'OnPageShown'):
1637 e.GetPage().OnPageShown()
1639 def OnCancel(self, e):
1640 new_machine_index = int(profile.getPreferenceFloat('active_machine'))
1641 profile.setActiveMachine(self._old_machine_index)
1642 profile.removeMachine(new_machine_index)
1644 class bedLevelWizardMain(InfoPage):
1645 def __init__(self, parent):
1646 super(bedLevelWizardMain, self).__init__(parent, _("Bed leveling wizard"))
1648 self.AddText(_('This wizard will help you in leveling your printer bed'))
1650 self.AddText(_('It will do the following steps'))
1651 self.AddText(_('* Move the printer head to each corner'))
1652 self.AddText(_(' and let you adjust the height of the bed to the nozzle'))
1653 self.AddText(_('* Print a line around the bed to check if it is level'))
1656 self.connectButton = self.AddButton(_('Connect to printer'))
1659 self.infoBox = self.AddInfoBox()
1660 self.resumeButton = self.AddButton(_('Resume'))
1661 self.upButton, self.downButton = self.AddDualButton(_('Up 0.2mm'), _('Down 0.2mm'))
1662 self.upButton2, self.downButton2 = self.AddDualButton(_('Up 10mm'), _('Down 10mm'))
1663 self.resumeButton.Enable(False)
1665 self.upButton.Enable(False)
1666 self.downButton.Enable(False)
1667 self.upButton2.Enable(False)
1668 self.downButton2.Enable(False)
1670 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1671 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1672 self.Bind(wx.EVT_BUTTON, self.OnBedUp, self.upButton)
1673 self.Bind(wx.EVT_BUTTON, self.OnBedDown, self.downButton)
1674 self.Bind(wx.EVT_BUTTON, self.OnBedUp2, self.upButton2)
1675 self.Bind(wx.EVT_BUTTON, self.OnBedDown2, self.downButton2)
1677 def OnConnect(self, e = None):
1678 if self.comm is not None:
1682 wx.CallAfter(self.OnConnect)
1684 self.connectButton.Enable(False)
1685 self.comm = machineCom.MachineCom(callbackObject=self)
1686 self.infoBox.SetBusy(_('Connecting to machine.'))
1687 self._wizardState = 0
1689 def OnBedUp(self, e):
1690 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1691 self.comm.sendCommand('G92 Z10')
1692 self.comm.sendCommand('G1 Z9.8 F%d' % (feedZ))
1693 self.comm.sendCommand('M400')
1695 def OnBedDown(self, e):
1696 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1697 self.comm.sendCommand('G92 Z10')
1698 self.comm.sendCommand('G1 Z10.2 F%d' % (feedZ))
1699 self.comm.sendCommand('M400')
1701 def OnBedUp2(self, e):
1702 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1703 self.comm.sendCommand('G92 Z10')
1704 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1705 self.comm.sendCommand('M400')
1707 def OnBedDown2(self, e):
1708 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1709 self.comm.sendCommand('G92 Z10')
1710 self.comm.sendCommand('G1 Z20 F%d' % (feedZ))
1711 self.comm.sendCommand('M400')
1713 def AllowNext(self):
1714 if self.GetParent().headOffsetCalibration is not None and int(profile.getMachineSetting('extruder_amount')) > 1:
1715 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().headOffsetCalibration)
1718 def OnResume(self, e):
1719 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1720 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1721 if self._wizardState == -1:
1722 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer...'))
1723 wx.CallAfter(self.upButton.Enable, False)
1724 wx.CallAfter(self.downButton.Enable, False)
1725 wx.CallAfter(self.upButton2.Enable, False)
1726 wx.CallAfter(self.downButton2.Enable, False)
1727 self.comm.sendCommand('M105')
1728 self.comm.sendCommand('G28')
1729 self._wizardState = 1
1730 elif self._wizardState == 2:
1731 if profile.getMachineSetting('has_heated_bed') == 'True':
1732 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back center...'))
1733 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1734 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') / 2.0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1735 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1736 self.comm.sendCommand('M400')
1737 self._wizardState = 3
1739 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back left corner...'))
1740 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1741 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1742 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1743 self.comm.sendCommand('M400')
1744 self._wizardState = 3
1745 elif self._wizardState == 4:
1746 if profile.getMachineSetting('has_heated_bed') == 'True':
1747 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1748 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1749 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 5, feedTravel))
1750 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1751 self.comm.sendCommand('M400')
1752 self._wizardState = 7
1754 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back right corner...'))
1755 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1756 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, profile.getMachineSettingFloat('machine_depth') - 25, feedTravel))
1757 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1758 self.comm.sendCommand('M400')
1759 self._wizardState = 5
1760 elif self._wizardState == 6:
1761 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1762 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1763 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 20, feedTravel))
1764 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1765 self.comm.sendCommand('M400')
1766 self._wizardState = 7
1767 elif self._wizardState == 8:
1768 wx.CallAfter(self.infoBox.SetBusy, _('Heating up printer...'))
1769 self.comm.sendCommand('G1 Z15 F%d' % (feedZ))
1770 self.comm.sendCommand('M104 S%d' % (profile.getProfileSettingFloat('print_temperature')))
1771 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, 0, feedTravel))
1772 self._wizardState = 9
1773 elif self._wizardState == 10:
1774 self._wizardState = 11
1775 wx.CallAfter(self.infoBox.SetInfo, _('Printing a square on the printer bed at 0.3mm height.'))
1776 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1777 feedPrint = profile.getProfileSettingFloat('print_speed') * 60
1778 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1779 w = profile.getMachineSettingFloat('machine_width') - 10
1780 d = profile.getMachineSettingFloat('machine_depth')
1781 filamentRadius = profile.getProfileSettingFloat('filament_diameter') / 2
1782 filamentArea = math.pi * filamentRadius * filamentRadius
1783 ePerMM = (profile.calculateEdgeWidth() * 0.3) / filamentArea
1787 'G1 Z2 F%d' % (feedZ),
1789 'G1 X%d Y%d F%d' % (5, 5, feedTravel),
1790 'G1 Z0.3 F%d' % (feedZ)]
1792 gcodeList.append('G1 E%f F%d' % (eValue, profile.getProfileSettingFloat('retraction_speed') * 60))
1794 for i in xrange(0, 3):
1795 dist = 5.0 + 0.4 * float(i)
1796 eValue += (d - 2.0*dist) * ePerMM
1797 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, d - dist, eValue, feedPrint))
1798 eValue += (w - 2.0*dist) * ePerMM
1799 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, d - dist, eValue, feedPrint))
1800 eValue += (d - 2.0*dist) * ePerMM
1801 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, dist, eValue, feedPrint))
1802 eValue += (w - 2.0*dist) * ePerMM
1803 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, dist, eValue, feedPrint))
1805 gcodeList.append('M400')
1806 self.comm.printGCode(gcodeList)
1807 self.resumeButton.Enable(False)
1809 def mcLog(self, message):
1810 print 'Log:', message
1812 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1813 if self._wizardState == 1:
1814 self._wizardState = 2
1815 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front left screw of your printer bed\nSo the nozzle just hits the bed.'))
1816 wx.CallAfter(self.resumeButton.Enable, True)
1817 elif self._wizardState == 3:
1818 self._wizardState = 4
1819 if profile.getMachineSetting('has_heated_bed') == 'True':
1820 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back screw of your printer bed\nSo the nozzle just hits the bed.'))
1822 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back left screw of your printer bed\nSo the nozzle just hits the bed.'))
1823 wx.CallAfter(self.resumeButton.Enable, True)
1824 elif self._wizardState == 5:
1825 self._wizardState = 6
1826 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back right screw of your printer bed\nSo the nozzle just hits the bed.'))
1827 wx.CallAfter(self.resumeButton.Enable, True)
1828 elif self._wizardState == 7:
1829 self._wizardState = 8
1830 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front right screw of your printer bed\nSo the nozzle just hits the bed.'))
1831 wx.CallAfter(self.resumeButton.Enable, True)
1832 elif self._wizardState == 9:
1833 if temp[0] < profile.getProfileSettingFloat('print_temperature') - 5:
1834 wx.CallAfter(self.infoBox.SetInfo, _('Heating up printer: %d/%d') % (temp[0], profile.getProfileSettingFloat('print_temperature')))
1836 wx.CallAfter(self.infoBox.SetAttention, _('The printer is hot now. Please insert some PLA filament into the printer.'))
1837 wx.CallAfter(self.resumeButton.Enable, True)
1838 self._wizardState = 10
1840 def mcStateChange(self, state):
1841 if self.comm is None:
1843 if self.comm.isOperational():
1844 if self._wizardState == 0:
1845 wx.CallAfter(self.infoBox.SetAttention, _('Use the up/down buttons to move the bed and adjust your Z endstop.'))
1846 wx.CallAfter(self.upButton.Enable, True)
1847 wx.CallAfter(self.downButton.Enable, True)
1848 wx.CallAfter(self.upButton2.Enable, True)
1849 wx.CallAfter(self.downButton2.Enable, True)
1850 wx.CallAfter(self.resumeButton.Enable, True)
1851 self._wizardState = -1
1852 elif self._wizardState == 11 and not self.comm.isPrinting():
1853 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1854 self.comm.sendCommand('G92 E0')
1855 self.comm.sendCommand('G1 E-10 F%d' % (profile.getProfileSettingFloat('retraction_speed') * 60))
1856 self.comm.sendCommand('M104 S0')
1857 wx.CallAfter(self.infoBox.SetInfo, _('Calibration finished.\nThe squares on the bed should slightly touch each other.'))
1858 wx.CallAfter(self.infoBox.SetReadyIndicator)
1859 wx.CallAfter(self.GetParent().FindWindowById(wx.ID_FORWARD).Enable)
1860 wx.CallAfter(self.connectButton.Enable, True)
1861 self._wizardState = 12
1862 elif self.comm.isError():
1863 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1865 def mcMessage(self, message):
1868 def mcProgress(self, lineNr):
1871 def mcZChange(self, newZ):
1874 class headOffsetCalibrationPage(InfoPage):
1875 def __init__(self, parent):
1876 super(headOffsetCalibrationPage, self).__init__(parent, _("Printer head offset calibration"))
1878 self.AddText(_('This wizard will help you in calibrating the printer head offsets of your dual extrusion machine'))
1881 self.connectButton = self.AddButton(_('Connect to printer'))
1884 self.infoBox = self.AddInfoBox()
1885 self.textEntry = self.AddTextCtrl('')
1886 self.textEntry.Enable(False)
1887 self.resumeButton = self.AddButton(_('Resume'))
1888 self.resumeButton.Enable(False)
1890 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1891 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1893 def AllowBack(self):
1896 def OnConnect(self, e = None):
1897 if self.comm is not None:
1901 wx.CallAfter(self.OnConnect)
1903 self.connectButton.Enable(False)
1904 self.comm = machineCom.MachineCom(callbackObject=self)
1905 self.infoBox.SetBusy(_('Connecting to machine.'))
1906 self._wizardState = 0
1908 def OnResume(self, e):
1909 if self._wizardState == 2:
1910 self._wizardState = 3
1911 wx.CallAfter(self.infoBox.SetBusy, _('Printing initial calibration cross'))
1913 w = profile.getMachineSettingFloat('machine_width')
1914 d = profile.getMachineSettingFloat('machine_depth')
1916 gcode = gcodeGenerator.gcodeGenerator()
1917 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1918 gcode.setPrintSpeed(profile.getProfileSettingFloat('bottom_layer_speed'))
1925 gcode.addMove(w/2, 5)
1926 gcode.addMove(z=0.2)
1928 gcode.addExtrude(w/2, d-5.0)
1930 gcode.addMove(5, d/2)
1932 gcode.addExtrude(w-5.0, d/2)
1933 gcode.addRetract(15)
1936 gcode.addMove(w/2, 5)
1938 gcode.addExtrude(w/2, d-5.0)
1940 gcode.addMove(5, d/2)
1942 gcode.addExtrude(w-5.0, d/2)
1943 gcode.addRetract(15)
1948 gcode.addCmd('M400')
1950 self.comm.printGCode(gcode.list())
1951 self.resumeButton.Enable(False)
1952 elif self._wizardState == 4:
1954 float(self.textEntry.GetValue())
1957 profile.putPreference('extruder_offset_x1', self.textEntry.GetValue())
1958 self._wizardState = 5
1959 self.infoBox.SetAttention(_('Please measure the distance between the horizontal lines in millimeters.'))
1960 self.textEntry.SetValue('0.0')
1961 self.textEntry.Enable(True)
1962 elif self._wizardState == 5:
1964 float(self.textEntry.GetValue())
1967 profile.putPreference('extruder_offset_y1', self.textEntry.GetValue())
1968 self._wizardState = 6
1969 self.infoBox.SetBusy(_('Printing the fine calibration lines.'))
1970 self.textEntry.SetValue('')
1971 self.textEntry.Enable(False)
1972 self.resumeButton.Enable(False)
1974 x = profile.getMachineSettingFloat('extruder_offset_x1')
1975 y = profile.getMachineSettingFloat('extruder_offset_y1')
1976 gcode = gcodeGenerator.gcodeGenerator()
1977 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1978 gcode.setPrintSpeed(25)
1981 gcode.addMove(50, 40, 0.2)
1983 for n in xrange(0, 10):
1984 gcode.addExtrude(50 + n * 10, 150)
1985 gcode.addExtrude(50 + n * 10 + 5, 150)
1986 gcode.addExtrude(50 + n * 10 + 5, 40)
1987 gcode.addExtrude(50 + n * 10 + 10, 40)
1988 gcode.addMove(40, 50)
1989 for n in xrange(0, 10):
1990 gcode.addExtrude(150, 50 + n * 10)
1991 gcode.addExtrude(150, 50 + n * 10 + 5)
1992 gcode.addExtrude(40, 50 + n * 10 + 5)
1993 gcode.addExtrude(40, 50 + n * 10 + 10)
1994 gcode.addRetract(15)
1997 gcode.addMove(50 - x, 30 - y, 0.2)
1999 for n in xrange(0, 10):
2000 gcode.addExtrude(50 + n * 10.2 - 1.0 - x, 140 - y)
2001 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 140 - y)
2002 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 30 - y)
2003 gcode.addExtrude(50 + n * 10.2 - 1.0 + 10 - x, 30 - y)
2004 gcode.addMove(30 - x, 50 - y, 0.2)
2005 for n in xrange(0, 10):
2006 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 - y)
2007 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
2008 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
2009 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 10 - y)
2010 gcode.addRetract(15)
2012 gcode.addCmd('M400')
2013 gcode.addCmd('M104 T0 S0')
2014 gcode.addCmd('M104 T1 S0')
2015 self.comm.printGCode(gcode.list())
2016 elif self._wizardState == 7:
2018 n = int(self.textEntry.GetValue()) - 1
2021 x = profile.getMachineSettingFloat('extruder_offset_x1')
2023 profile.putPreference('extruder_offset_x1', '%0.2f' % (x))
2024 self.infoBox.SetAttention(_('Which horizontal line number lays perfect on top of each other? Front most line is zero.'))
2025 self.textEntry.SetValue('10')
2026 self._wizardState = 8
2027 elif self._wizardState == 8:
2029 n = int(self.textEntry.GetValue()) - 1
2032 y = profile.getMachineSettingFloat('extruder_offset_y1')
2034 profile.putPreference('extruder_offset_y1', '%0.2f' % (y))
2035 self.infoBox.SetInfo(_('Calibration finished. Offsets are: %s %s') % (profile.getMachineSettingFloat('extruder_offset_x1'), profile.getMachineSettingFloat('extruder_offset_y1')))
2036 self.infoBox.SetReadyIndicator()
2037 self._wizardState = 8
2039 self.resumeButton.Enable(False)
2041 def mcLog(self, message):
2042 print 'Log:', message
2044 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
2045 if self._wizardState == 1:
2046 if temp[0] >= 210 and temp[1] >= 210:
2047 self._wizardState = 2
2048 wx.CallAfter(self.infoBox.SetAttention, _('Please load both extruders with PLA.'))
2049 wx.CallAfter(self.resumeButton.Enable, True)
2050 wx.CallAfter(self.resumeButton.SetFocus)
2052 def mcStateChange(self, state):
2053 if self.comm is None:
2055 if self.comm.isOperational():
2056 if self._wizardState == 0:
2057 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer and heating up both extruders.'))
2058 self.comm.sendCommand('M105')
2059 self.comm.sendCommand('M104 S220 T0')
2060 self.comm.sendCommand('M104 S220 T1')
2061 self.comm.sendCommand('G28')
2062 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
2063 self._wizardState = 1
2064 if not self.comm.isPrinting():
2065 if self._wizardState == 3:
2066 self._wizardState = 4
2067 wx.CallAfter(self.infoBox.SetAttention, _('Please measure the distance between the vertical lines in millimeters.'))
2068 wx.CallAfter(self.textEntry.SetValue, '0.0')
2069 wx.CallAfter(self.textEntry.Enable, True)
2070 wx.CallAfter(self.resumeButton.Enable, True)
2071 wx.CallAfter(self.resumeButton.SetFocus)
2072 elif self._wizardState == 6:
2073 self._wizardState = 7
2074 wx.CallAfter(self.infoBox.SetAttention, _('Which vertical line number lays perfect on top of each other? Leftmost line is zero.'))
2075 wx.CallAfter(self.textEntry.SetValue, '10')
2076 wx.CallAfter(self.textEntry.Enable, True)
2077 wx.CallAfter(self.resumeButton.Enable, True)
2078 wx.CallAfter(self.resumeButton.SetFocus)
2080 elif self.comm.isError():
2081 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
2083 def mcMessage(self, message):
2086 def mcProgress(self, lineNr):
2089 def mcZChange(self, newZ):
2092 class bedLevelWizard(wx.wizard.Wizard):
2094 super(bedLevelWizard, self).__init__(None, -1, _("Bed leveling wizard"))
2096 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
2097 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
2099 self.mainPage = bedLevelWizardMain(self)
2100 self.headOffsetCalibration = None
2102 self.RunWizard(self.mainPage)
2105 def OnPageChanging(self, e):
2106 e.GetPage().StoreData()
2108 def OnPageChanged(self, e):
2109 if e.GetPage().AllowNext():
2110 self.FindWindowById(wx.ID_FORWARD).Enable()
2112 self.FindWindowById(wx.ID_FORWARD).Disable()
2113 if e.GetPage().AllowBack():
2114 self.FindWindowById(wx.ID_BACKWARD).Enable()
2116 self.FindWindowById(wx.ID_BACKWARD).Disable()
2118 class headOffsetWizard(wx.wizard.Wizard):
2120 super(headOffsetWizard, self).__init__(None, -1, _("Head offset wizard"))
2122 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
2123 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
2125 self.mainPage = headOffsetCalibrationPage(self)
2127 self.RunWizard(self.mainPage)
2130 def OnPageChanging(self, e):
2131 e.GetPage().StoreData()
2133 def OnPageChanged(self, e):
2134 if e.GetPage().AllowNext():
2135 self.FindWindowById(wx.ID_FORWARD).Enable()
2137 self.FindWindowById(wx.ID_FORWARD).Disable()
2138 if e.GetPage().AllowBack():
2139 self.FindWindowById(wx.ID_BACKWARD).Enable()
2141 self.FindWindowById(wx.ID_BACKWARD).Disable()