fill_density = 20
perimeter_before_infill = True
nozzle_size = 0.6
-print_speed = 50
-print_temperature = 218
+print_speed = 12
+print_temperature = 225
print_temperature2 = 0
print_temperature3 = 0
print_temperature4 = 0
wipe_tower = False
wipe_tower_volume = 15
ooze_shield = False
-filament_diameter = 2.85
+filament_diameter = 2.90
filament_diameter2 = 0
filament_diameter3 = 0
filament_diameter4 = 0
filament_diameter5 = 0
filament_flow = 100
-retraction_speed = 7
-retraction_amount = 3
+retraction_speed = 4
+retraction_amount = 2
retraction_dual_amount = 16.5
retraction_min_travel = 1.5
retraction_combing = All
simplemodesettings =
simplemodeprofile = 2_normal
simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
[alterations]
start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
G92 E0 ; set extruder position to 0
M140 S{print_bed_temperature}; get bed heating up
G28 ; home all
+ M907 X675 ; reduce extruder torque for safety
M109 S160 ; set to cleaning temp and wait
- G1 Z150 E-30 F75 ; suck up XXmm of filament
+ G1 Z150 E-30 F45 ; suck up XXmm of filament
M109 S170 ; heat up rest of way
G1 X45 Y174 F11520 ; move behind scraper
G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
M400 ; clear buffer
M109 S{print_temperature} ; set extruder temp and wait
G4 S15 ; wait for bed to temp up
- G1 Z2 E0 F75 ; extrude filament back into nozzle
+ G1 Z2 E0 F45 ; extrude filament back into nozzle
M140 S{print_bed_temperature}; get bed temping up during first layer
end.gcode =
M400
M107 ; fans off
G92 E5 ; set extruder to 5mm for retract on print end
G1 X5 Y5 Z158 E0 F10000 ; move to cooling positioning
- M190 R50 ; wait for bed to cool
- M140 S0 ;
G1 X145 F1000 ; move to cooling positioning
G1 Y175 F1000 ; move to cooling positioning
M84 ; steppers off