Updated translations. Included russian translation from russian reseller.

[cura.git] / resources / locale / nl / LC_MESSAGES / Cura.po

diff --git a/resources/locale/nl/LC_MESSAGES/Cura.po b/resources/locale/nl/LC_MESSAGES/Cura.po
index 8e0d868af718328128ecf9b33416f80c4d367f4a..f86e4e4791ca02d6498a2520e24bdadb1d807938 100644 (file)
--- a/resources/locale/nl/LC_MESSAGES/Cura.po
+++ b/resources/locale/nl/LC_MESSAGES/Cura.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""\r
 "Project-Id-Version: Cura\n"\r
 "Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r
 "PO-Revision-Date: 2013-10-01 15:32+0100\n"\r
 "Last-Translator: \n"\r
 "Language-Team: LANGUAGE <LL@li.org>\n"\r
@@ -15,11 +15,11 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"\r
 "X-Generator: Poedit 1.5.7\n"\r
 \r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr "Er is een nieuwere versie van Cura beschikbaar, wil je die downloaden?"\r
 \r
-#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r
 msgid "New version available"\r
 msgstr "Nieuwe versie beschikbaar"\r
 \r
@@ -60,16 +60,16 @@ msgstr ""
 msgid "Select which Printrbot machine you have:"\r
 msgstr "Wat voor een machine heb je:"\r
 \r
-#: Cura/gui/configWizard.py:323\r
+#: Cura/gui/configWizard.py:349\r
 #, fuzzy\r
 msgid "Other machine information"\r
 msgstr "Afmeting van de machine in mm"\r
 \r
-#: Cura/gui/configWizard.py:324\r
+#: Cura/gui/configWizard.py:350\r
 msgid "The following pre-defined machine profiles are available"\r
 msgstr "De volgende vooraf gedefinieerde machine profielen zijn beschikbaar"\r
 \r
-#: Cura/gui/configWizard.py:325\r
+#: Cura/gui/configWizard.py:351\r
 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r
@@ -78,25 +78,25 @@ msgid ""
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:362\r
 msgid "Custom..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:380\r
 msgid "Cura Ready!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:381\r
 #, fuzzy\r
 msgid "Cura is now ready to be used!"\r
 msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
 \r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:385\r
 #, fuzzy\r
 msgid "Custom RepRap information"\r
 msgstr "Dien anomieme gebruiksinformatie in:"\r
 \r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:386\r
 #, fuzzy\r
 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
@@ -105,12 +105,12 @@ msgstr ""
 "RepRap machines verschillen enigzins. Er is geen standaard configuratie in "\r
 "Cura voor enig model."\r
 \r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:387\r
 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr "Controleer het standaardprofiel voordat u het op uw machine gebruikt."\r
 \r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:388\r
 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
@@ -118,55 +118,55 @@ msgstr ""
 "Wanneer je een standaard profiel voor je machine wenst, maak dan een issue "\r
 "aan op Github."\r
 \r
-#: Cura/gui/configWizard.py:364\r
+#: Cura/gui/configWizard.py:390\r
 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr "Je dient zelf handmatig Marlin of Sprinter firmware te installeren."\r
 \r
-#: Cura/gui/configWizard.py:366\r
+#: Cura/gui/configWizard.py:392\r
 msgid "Machine name"\r
 msgstr "Machine naam"\r
 \r
 # Ik denk dat we hier duidelijker moeten schrijven dat het om de breedte van je printbereik gaat, voordat mensen de breedte van hun machine gaan opmeten...\r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:393\r
 msgid "Machine width (mm)"\r
 msgstr "Machine breedte (mm)"\r
 \r
 # Idem aan width\r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:394\r
 msgid "Machine depth (mm)"\r
 msgstr "Machine lengte (mm)"\r
 \r
 # Idem width\r
-#: Cura/gui/configWizard.py:369\r
+#: Cura/gui/configWizard.py:395\r
 msgid "Machine height (mm)"\r
 msgstr "Machine hoogte (mm)"\r
 \r
-#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r
 msgid "Nozzle size (mm)"\r
 msgstr "Nozzle maat (mm)"\r
 \r
-#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r
 msgid "Heated bed"\r
 msgstr "Verwarmd platform"\r
 \r
-#: Cura/gui/configWizard.py:372\r
+#: Cura/gui/configWizard.py:398\r
 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr "Midden van platform is 0,0,0 (RoStock)"\r
 \r
-#: Cura/gui/configWizard.py:392\r
+#: Cura/gui/configWizard.py:418\r
 msgid "Select your machine"\r
 msgstr "Selecteer je machine"\r
 \r
-#: Cura/gui/configWizard.py:393\r
+#: Cura/gui/configWizard.py:419\r
 msgid "What kind of machine do you have:"\r
 msgstr "Wat voor een machine heb je:"\r
 \r
-#: Cura/gui/configWizard.py:408\r
+#: Cura/gui/configWizard.py:438\r
 #, fuzzy\r
 msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr "Anders (bv RepRap)"\r
 \r
-#: Cura/gui/configWizard.py:411\r
+#: Cura/gui/configWizard.py:441\r
 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
@@ -174,7 +174,7 @@ msgstr ""
 "Door anonieme gebruikers informatie te verzamelen kan Cura blijven "\r
 "verbeteren."\r
 \r
-#: Cura/gui/configWizard.py:412\r
+#: Cura/gui/configWizard.py:442\r
 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
@@ -182,19 +182,19 @@ msgstr ""
 "Je model zal NIET online gepubliceerd worden. Het verzamelt ook geen privacy "\r
 "gevoelige informatie."\r
 \r
-#: Cura/gui/configWizard.py:413\r
+#: Cura/gui/configWizard.py:443\r
 msgid "Submit anonymous usage information:"\r
 msgstr "Dien anomieme gebruiksinformatie in:"\r
 \r
-#: Cura/gui/configWizard.py:414\r
+#: Cura/gui/configWizard.py:444\r
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr "Kijk voor alle details op: http://wiki.ultimaker.com/Cura:stats"\r
 \r
-#: Cura/gui/configWizard.py:531\r
+#: Cura/gui/configWizard.py:576\r
 msgid "Select upgraded parts you have"\r
 msgstr "Selecteer de upgrades die je hebt"\r
 \r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:577\r
 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
@@ -202,24 +202,24 @@ msgstr ""
 "Cura wil graag weten welke upgrades jouw machine heeft zodat er betere "\r
 "standaard instellingen voor jouw Ultimaker gebruikt kunnen worden."\r
 \r
-#: Cura/gui/configWizard.py:534\r
+#: Cura/gui/configWizard.py:579\r
 msgid "Extruder drive upgrade"\r
 msgstr "Upgrade van extrusie aandrijving"\r
 \r
-#: Cura/gui/configWizard.py:535\r
+#: Cura/gui/configWizard.py:580\r
 #, fuzzy\r
 msgid "Heated printer bed (kit)"\r
 msgstr "Verwarmd platform (zelf gemaakt)"\r
 \r
-#: Cura/gui/configWizard.py:536\r
+#: Cura/gui/configWizard.py:581\r
 msgid "Heated printer bed (self built)"\r
 msgstr "Verwarmd platform (zelf gemaakt)"\r
 \r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:582\r
 msgid "Dual extrusion (experimental)"\r
 msgstr "Duo extrusie (experimenteel)"\r
 \r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:584\r
 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
@@ -229,7 +229,7 @@ msgstr ""
 "upgrade van de extrusie aandrijving. Voor de betrouwbaardheid van de machine "\r
 "wordt deze upgrade aangeraden wanneer je deze niet hebt."\r
 \r
-#: Cura/gui/configWizard.py:540\r
+#: Cura/gui/configWizard.py:585\r
 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
@@ -237,11 +237,11 @@ msgstr ""
 "Deze upgrade kan aangeschaft worden in de webshop van Ultimaker. De upgrade "\r
 "staat ook op thingiverse als ding:26094"\r
 \r
-#: Cura/gui/configWizard.py:562\r
+#: Cura/gui/configWizard.py:607\r
 msgid "Upgrade Ultimaker Firmware"\r
 msgstr "Ultimaker Firmware Opwaarderen"\r
 \r
-#: Cura/gui/configWizard.py:563\r
+#: Cura/gui/configWizard.py:608\r
 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
@@ -251,7 +251,7 @@ msgstr ""
 "stappenmotoren aan en regelt de temperatuur. De firmware zorgt dat je "\r
 "printer uiteindelijk werkt."\r
 \r
-#: Cura/gui/configWizard.py:565\r
+#: Cura/gui/configWizard.py:610\r
 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
@@ -260,7 +260,7 @@ msgstr ""
 "gedaan om nog betere prints te maken en om de machine makkelijker te "\r
 "calibreren."\r
 \r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:612\r
 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
@@ -269,28 +269,28 @@ msgstr ""
 "Cura heeft deze nieuwe mogelijkheden nodig en zal hoogstwaarschijnlijk "\r
 "opgewaardeerd moeten worden. Je krijgt nu de kans om dat te doen."\r
 \r
-#: Cura/gui/configWizard.py:573\r
+#: Cura/gui/configWizard.py:618\r
 msgid "Do not upgrade to this firmware if:"\r
 msgstr "Niet opwaarderen naar deze firmware als:"\r
 \r
-#: Cura/gui/configWizard.py:574\r
+#: Cura/gui/configWizard.py:619\r
 #, fuzzy\r
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr "* Je een oudere machine hebt die gebaseerd is op een ATMega1280"\r
 \r
-#: Cura/gui/configWizard.py:575\r
+#: Cura/gui/configWizard.py:620\r
 msgid "* Build your own heated bed"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:576\r
+#: Cura/gui/configWizard.py:621\r
 msgid "* Have other changes in the firmware"\r
 msgstr "* Je andere wijzigingen in de firmware hebt"\r
 \r
-#: Cura/gui/configWizard.py:596\r
+#: Cura/gui/configWizard.py:641\r
 msgid "Ultimaker Checkup"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:655\r
 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
@@ -298,108 +298,108 @@ msgstr ""
 "Het is handig om je machine nu op enkele punten te controleren.Je kan deze "\r
 "controle overslaan als je machine al goed is."\r
 \r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
 msgid "Run checks"\r
 msgstr "Doe een controle"\r
 \r
-#: Cura/gui/configWizard.py:611\r
+#: Cura/gui/configWizard.py:656\r
 msgid "Skip checks"\r
 msgstr "Sla de controle over"\r
 \r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:660\r
 msgid "Communication:"\r
 msgstr "Communicatie:"\r
 \r
-#: Cura/gui/configWizard.py:616\r
+#: Cura/gui/configWizard.py:661\r
 msgid "Temperature:"\r
 msgstr "Temperatuur:"\r
 \r
-#: Cura/gui/configWizard.py:617\r
+#: Cura/gui/configWizard.py:662\r
 msgid "Endstops:"\r
 msgstr "Eindschakelaars:"\r
 \r
-#: Cura/gui/configWizard.py:622\r
+#: Cura/gui/configWizard.py:667\r
 msgid "Show error log"\r
 msgstr "Laat de foutmelding log zien"\r
 \r
-#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
-#: Cura/gui/configWizard.py:1312\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r
 msgid "Connecting to machine."\r
 msgstr "Verbinding aan het maken met de machine"\r
 \r
-#: Cura/gui/configWizard.py:677\r
+#: Cura/gui/configWizard.py:722\r
 msgid "Cooldown before temperature check."\r
 msgstr "Afkoelen voor de temperatuur controle"\r
 \r
-#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r
 msgid "Checking the heater and temperature sensor."\r
 msgstr "Controle van de verwarming en de de temperatuur sensor."\r
 \r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:746\r
 msgid "Please make sure none of the endstops are pressed."\r
 msgstr "Zorg ervoor dat geen enkele eindschakelaar is ingedrukt."\r
 \r
-#: Cura/gui/configWizard.py:714\r
+#: Cura/gui/configWizard.py:759\r
 msgid "Temperature measurement FAILED!"\r
 msgstr "Temperatuur meting is MISLUKT!"\r
 \r
-#: Cura/gui/configWizard.py:719\r
+#: Cura/gui/configWizard.py:764\r
 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr "Temperatuur van printkop: %d"\r
 \r
-#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r
 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr "Communicatie status: %s"\r
 \r
-#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
-#: Cura/gui/configWizard.py:1488\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r
 msgid "Failed to establish connection with the printer."\r
 msgstr "Het is niet gelukt een verbinding te maken met de printer."\r
 \r
-#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r
 msgid "Please press the left X endstop."\r
 msgstr "Druk de linker X eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:824\r
 msgid "Please press the right X endstop."\r
 msgstr "Druk de rechter X eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:789\r
+#: Cura/gui/configWizard.py:834\r
 msgid "Please press the front Y endstop."\r
 msgstr "Druk de voorste Y eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r
 msgid "Please press the top Z endstop."\r
 msgstr "Druk de onderste Y eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:799\r
+#: Cura/gui/configWizard.py:844\r
 msgid "Please press the back Y endstop."\r
 msgstr "Druk de achterste Y eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r
 msgid "Checkup finished"\r
 msgstr "Controle gereed"\r
 \r
-#: Cura/gui/configWizard.py:818\r
+#: Cura/gui/configWizard.py:863\r
 msgid "Please press the bottom Z endstop."\r
 msgstr "Druk de bovenste Z eindschakaar in."\r
 \r
-#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r
 msgid "Ultimaker Calibration"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:912\r
 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 "Om de Stappen per E te kalibreren zijn enkele manuele handelingen nodig."\r
 \r
-#: Cura/gui/configWizard.py:868\r
+#: Cura/gui/configWizard.py:913\r
 msgid "First remove any filament from your machine."\r
 msgstr "Haal eerst al het filament uit de machine."\r
 \r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:914\r
 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
@@ -407,15 +407,15 @@ msgstr ""
 "Voer nu je filament in. Zorg dat het uiteinde gelijk ligt met de bovenkant "\r
 "van de extrusie aandrijving."\r
 \r
-#: Cura/gui/configWizard.py:870\r
+#: Cura/gui/configWizard.py:915\r
 msgid "We'll push the filament 100mm"\r
 msgstr "We zullen het filament 100 mm. doorvoeren"\r
 \r
-#: Cura/gui/configWizard.py:871\r
+#: Cura/gui/configWizard.py:916\r
 msgid "Extrude 100mm filament"\r
 msgstr "Extrudeer 100 mm. filament"\r
 \r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:917\r
 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
@@ -423,19 +423,19 @@ msgstr ""
 "Meet nu de hoeveelheid geëxtrudeerd filament op (dit kan meer, maar ook "\r
 "minder zijn dan 100 mm.)"\r
 \r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:918\r
 msgid "Save"\r
 msgstr "Opslaan"\r
 \r
-#: Cura/gui/configWizard.py:874\r
+#: Cura/gui/configWizard.py:919\r
 msgid "This results in the following steps per E:"\r
 msgstr "Dit resulteert in het volgende aantal stappen per E:"\r
 \r
-#: Cura/gui/configWizard.py:876\r
+#: Cura/gui/configWizard.py:921\r
 msgid "You can repeat these steps to get better calibration."\r
 msgstr "Je kan deze stappen herhalen voor een betere kalibratie."\r
 \r
-#: Cura/gui/configWizard.py:879\r
+#: Cura/gui/configWizard.py:924\r
 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
@@ -443,11 +443,11 @@ msgstr ""
 "Wanneer er nog filament in de printer zit, die warmte nodig heeft om het te "\r
 "verwijderen, druk dan op de verwarm knop hieronder:"\r
 \r
-#: Cura/gui/configWizard.py:880\r
+#: Cura/gui/configWizard.py:925\r
 msgid "Heatup for filament removal"\r
 msgstr "Opwarmen voor het verwijderen van filament"\r
 \r
-#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r
 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
@@ -456,212 +456,212 @@ msgstr ""
 "dit probleem zich blijft herhalen, haal dan de USB kabel uit de printer en "\r
 "sluit deze opnieuw aan."\r
 \r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1024\r
 msgid "Ultimaker2"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1025\r
 msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:981\r
+#: Cura/gui/configWizard.py:1026\r
 #, fuzzy\r
 msgid "Cura is now ready to be used with your Ultimaker2."\r
 msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
 \r
-#: Cura/gui/configWizard.py:986\r
+#: Cura/gui/configWizard.py:1031\r
 msgid "Lulzbot TAZ/Mini"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:987\r
+#: Cura/gui/configWizard.py:1032\r
 #, fuzzy\r
 msgid "Cura is now ready to be used with your Lulzbot."\r
 msgstr "Cura heeft nu toestemming om te delen op YouMagine"\r
 \r
-#: Cura/gui/configWizard.py:992\r
+#: Cura/gui/configWizard.py:1037\r
 msgid "Configuration Wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r
 #, fuzzy\r
 msgid "Bed leveling wizard"\r
 msgstr "Wizard: Platform vlak afstellen..."\r
 \r
-#: Cura/gui/configWizard.py:1055\r
+#: Cura/gui/configWizard.py:1100\r
 #, fuzzy\r
 msgid "This wizard will help you in leveling your printer bed"\r
 msgstr "Deze wizard helpt je bij de volgende stappen:"\r
 \r
-#: Cura/gui/configWizard.py:1057\r
+#: Cura/gui/configWizard.py:1102\r
 #, fuzzy\r
 msgid "It will do the following steps"\r
 msgstr "Dit resulteert in het volgende aantal stappen per E:"\r
 \r
-#: Cura/gui/configWizard.py:1058\r
+#: Cura/gui/configWizard.py:1103\r
 msgid "* Move the printer head to each corner"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1059\r
+#: Cura/gui/configWizard.py:1104\r
 msgid "  and let you adjust the height of the bed to the nozzle"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1060\r
+#: Cura/gui/configWizard.py:1105\r
 msgid "* Print a line around the bed to check if it is level"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r
 #, fuzzy\r
 msgid "Connect to printer"\r
 msgstr "Verbinding aan het maken met de machine"\r
 \r
-#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r
 msgid "Resume"\r
 msgstr "Ga door"\r
 \r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
 msgid "Up 0.2mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1068\r
+#: Cura/gui/configWizard.py:1113\r
 msgid "Down 0.2mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
 msgid "Up 10mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1069\r
+#: Cura/gui/configWizard.py:1114\r
 msgid "Down 10mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1129\r
+#: Cura/gui/configWizard.py:1174\r
 msgid "Homing printer..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1139\r
+#: Cura/gui/configWizard.py:1184\r
 msgid "Moving head to back center..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1191\r
 msgid "Moving head to back left corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r
 msgid "Moving head to front right corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1161\r
+#: Cura/gui/configWizard.py:1206\r
 msgid "Moving head to back right corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1175\r
+#: Cura/gui/configWizard.py:1220\r
 msgid "Heating up printer..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1182\r
+#: Cura/gui/configWizard.py:1227\r
 msgid "Printing a square on the printer bed at 0.3mm height."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1267\r
 msgid ""\r
 "Adjust the front left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1227\r
+#: Cura/gui/configWizard.py:1272\r
 msgid ""\r
 "Adjust the back screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1229\r
+#: Cura/gui/configWizard.py:1274\r
 msgid ""\r
 "Adjust the back left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1233\r
+#: Cura/gui/configWizard.py:1278\r
 msgid ""\r
 "Adjust the back right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1282\r
 msgid ""\r
 "Adjust the front right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1241\r
+#: Cura/gui/configWizard.py:1286\r
 #, python-format\r
 msgid "Heating up printer: %d/%d"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1243\r
+#: Cura/gui/configWizard.py:1288\r
 msgid ""\r
 "The printer is hot now. Please insert some PLA filament into the printer."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1252\r
+#: Cura/gui/configWizard.py:1297\r
 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1264\r
+#: Cura/gui/configWizard.py:1309\r
 msgid ""\r
 "Calibration finished.\n"\r
 "The squares on the bed should slightly touch each other."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1285\r
+#: Cura/gui/configWizard.py:1330\r
 #, fuzzy\r
 msgid ""\r
 "This wizard will help you in calibrating the printer head offsets of your "\r
 "dual extrusion machine"\r
 msgstr "Deze wizard helpt je bij de volgende stappen:"\r
 \r
-#: Cura/gui/configWizard.py:1318\r
+#: Cura/gui/configWizard.py:1363\r
 msgid "Printing initial calibration cross"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1366\r
+#: Cura/gui/configWizard.py:1411\r
 msgid ""\r
 "Please measure the distance between the horizontal lines in millimeters."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1376\r
+#: Cura/gui/configWizard.py:1421\r
 msgid "Printing the fine calibration lines."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1431\r
+#: Cura/gui/configWizard.py:1476\r
 msgid ""\r
 "Which horizontal line number lays perfect on top of each other? Front most "\r
 "line is zero."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1442\r
+#: Cura/gui/configWizard.py:1487\r
 #, python-format\r
 msgid "Calibration finished. Offsets are: %s %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1455\r
+#: Cura/gui/configWizard.py:1500\r
 msgid "Please load both extruders with PLA."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1464\r
+#: Cura/gui/configWizard.py:1509\r
 msgid "Homing printer and heating up both extruders."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1474\r
+#: Cura/gui/configWizard.py:1519\r
 msgid "Please measure the distance between the vertical lines in millimeters."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1481\r
+#: Cura/gui/configWizard.py:1526\r
 msgid ""\r
 "Which vertical line number lays perfect on top of each other? Leftmost line "\r
 "is zero."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1530\r
+#: Cura/gui/configWizard.py:1575\r
 #, fuzzy\r
 msgid "Head offset wizard"\r
 msgstr "Wizard: Afstand printkoppen calibreren..."\r
@@ -671,7 +671,7 @@ msgstr "Wizard: Afstand printkoppen calibreren..."
 msgid "Expert config"\r
 msgstr "Expert"\r
 \r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:71\r
 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
@@ -679,36 +679,36 @@ msgstr ""
 "Sorry... Cura heeft geen standaard firmware voor de configuratie van jouw "\r
 "machine."\r
 \r
-#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
-#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r
 msgid "Firmware update"\r
 msgstr "Firmware update"\r
 \r
-#: Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:76\r
 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r
 msgid "OK"\r
 msgstr "Oké"\r
 \r
-#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r
 msgid "Reading firmware..."\r
 msgstr "Firmware controleren..."\r
 \r
-#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r
 msgid "Connecting to machine..."\r
 msgstr "Verbinding maken met de machine..."\r
 \r
-#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r
 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:123\r
+#: Cura/gui/firmwareInstall.py:130\r
 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
@@ -716,25 +716,25 @@ msgstr ""
 "Geen machine gevonden om de firmware op te waarderen\n"\r
 "Is je machine verbonden met de computer?"\r
 \r
-#: Cura/gui/firmwareInstall.py:130\r
+#: Cura/gui/firmwareInstall.py:137\r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UMO firmware on an UM2 or UMO+?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:136\r
+#: Cura/gui/firmwareInstall.py:143\r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UM2 or UMO+ firmware on an UMO?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r
 msgid "Uploading firmware..."\r
 msgstr "Firmware aan het uploaden..."\r
 \r
-#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r
 #, python-format\r
 msgid ""\r
 "Done!\n"\r
@@ -743,11 +743,11 @@ msgstr ""
 "Klaar!\n"\r
 "Firmware geïnstalleerd: %s"\r
 \r
-#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r
 msgid "Failed to write firmware.\n"\r
 msgstr "Het is niet gelukt de firmware te uploaden. \n"\r
 \r
-#: Cura/gui/firmwareInstall.py:290\r
+#: Cura/gui/firmwareInstall.py:297\r
 #, fuzzy\r
 msgid "Failed to connect to programmer.\n"\r
 msgstr "Verbinden met YouMagine.com is mislukt."\r
@@ -773,7 +773,7 @@ msgstr "Maak Het Platform Leeg"
 msgid "Print...\tCTRL+P"\r
 msgstr "Print...\tCTRL+P"\r
 \r
-#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r
 msgid "Save GCode..."\r
 msgstr "Sla GCode Op..."\r
 \r
@@ -789,155 +789,151 @@ msgstr "Open Profiel..."
 msgid "Save Profile..."\r
 msgstr "Sla Profiel Op..."\r
 \r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
 msgid "Load Profile from GCode..."\r
 msgstr "Laad Profiel Uit GCode..."\r
 \r
-#: Cura/gui/mainWindow.py:100\r
+#: Cura/gui/mainWindow.py:104\r
 msgid "Reset Profile to default"\r
 msgstr "Reset Profiel Naar Standaardinstellingen"\r
 \r
-#: Cura/gui/mainWindow.py:105\r
+#: Cura/gui/mainWindow.py:109\r
 msgid "Preferences...\tCTRL+,"\r
 msgstr "Voorkeuren...\tCTRL+,"\r
 \r
-#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r
 msgid "Machine settings..."\r
 msgstr "Machineinstellingen..."\r
 \r
-#: Cura/gui/mainWindow.py:113\r
+#: Cura/gui/mainWindow.py:117\r
 msgid "Recent Model Files"\r
 msgstr "Recente Modellen"\r
 \r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:124\r
 msgid "Recent Profile Files"\r
 msgstr "Recente Profielen"\r
 \r
-#: Cura/gui/mainWindow.py:126\r
+#: Cura/gui/mainWindow.py:130\r
 msgid "Quit"\r
 msgstr "Sluit"\r
 \r
-#: Cura/gui/mainWindow.py:128\r
+#: Cura/gui/mainWindow.py:132\r
 msgid "File"\r
 msgstr "Bestand"\r
 \r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
 #, fuzzy\r
 msgid "Minecraft map import..."\r
 msgstr "Importeer Minecraft kaart data..."\r
 \r
-#: Cura/gui/mainWindow.py:140\r
+#: Cura/gui/mainWindow.py:144\r
 msgid "PID Debugger..."\r
 msgstr "PID foutopsporing..."\r
 \r
-#: Cura/gui/mainWindow.py:142\r
+#: Cura/gui/mainWindow.py:146\r
 #, fuzzy\r
 msgid "Auto Firmware Update..."\r
 msgstr "Firmware update"\r
 \r
-#: Cura/gui/mainWindow.py:145\r
-msgid "Copy profile to clipboard"\r
-msgstr "Kopieer profiel naar klembord"\r
-\r
-#: Cura/gui/mainWindow.py:149\r
+#: Cura/gui/mainWindow.py:153\r
 msgid "Print all at once"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:151\r
+#: Cura/gui/mainWindow.py:155\r
 #, fuzzy\r
 msgid "Print one at a time"\r
 msgstr "Afmetingen printkop"\r
 \r
-#: Cura/gui/mainWindow.py:158\r
+#: Cura/gui/mainWindow.py:162\r
 msgid "Tools"\r
 msgstr "Gereedschappen"\r
 \r
-#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r
 msgid "Machine"\r
 msgstr "Machine"\r
 \r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
 msgid "Switch to quickprint..."\r
 msgstr "Eenvoudige bedieningsmodus"\r
 \r
-#: Cura/gui/mainWindow.py:171\r
+#: Cura/gui/mainWindow.py:175\r
 msgid "Switch to full settings..."\r
 msgstr "Uitgebreide bedieningsmodus"\r
 \r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
 #, fuzzy\r
 msgid "Open expert settings...\tCTRL+E"\r
 msgstr "Expertinstellingen..."\r
 \r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:184\r
 msgid "Run bed leveling wizard..."\r
 msgstr "Wizard: Platform vlak afstellen..."\r
 \r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
 msgid "Run head offset wizard..."\r
 msgstr "Wizard: Afstand printkoppen calibreren..."\r
 \r
-#: Cura/gui/mainWindow.py:185\r
+#: Cura/gui/mainWindow.py:189\r
 msgid "Expert"\r
 msgstr "Expert"\r
 \r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
 msgid "Online documentation..."\r
 msgstr "Online documentatie..."\r
 \r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
 msgid "Report a problem..."\r
 msgstr "Meld een probleem..."\r
 \r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
 msgid "Check for update..."\r
 msgstr "Controleer op updates..."\r
 \r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:198\r
 msgid "Open YouMagine website..."\r
 msgstr "Open de YouMagine website..."\r
 \r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:200\r
 msgid "About Cura..."\r
 msgstr "Over Cura..."\r
 \r
-#: Cura/gui/mainWindow.py:198\r
+#: Cura/gui/mainWindow.py:202\r
 msgid "Help"\r
 msgstr "Help"\r
 \r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
 msgid ""\r
 "For \"One at a time\" printing, you need to have entered the correct head "\r
 "size and gantry height in the machine settings"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:379\r
+#: Cura/gui/mainWindow.py:390\r
 msgid "One at a time warning"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:478\r
 #, fuzzy\r
 msgid "Add new machine..."\r
 msgstr "Voeg een nieuwe machine toe..."\r
 \r
-#: Cura/gui/mainWindow.py:475\r
+#: Cura/gui/mainWindow.py:486\r
 #, fuzzy\r
 msgid "Install default firmware..."\r
 msgstr "Installeer de standaardfirmware..."\r
 \r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:489\r
 msgid "Install custom firmware..."\r
 msgstr "Installeer je eigen firmware..."\r
 \r
-#: Cura/gui/mainWindow.py:482\r
+#: Cura/gui/mainWindow.py:493\r
 msgid "Select profile file to load"\r
 msgstr "Selecteer een profielbestand om te laden"\r
 \r
-#: Cura/gui/mainWindow.py:494\r
+#: Cura/gui/mainWindow.py:505\r
 msgid "Select gcode file to load profile from"\r
 msgstr "Selecteer een GCode bestand om het profiel uit te laden..."\r
 \r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
 msgid ""\r
 "No profile found in GCode file.\n"\r
 "This feature only works with GCode files made by Cura 12.07 or newer."\r
@@ -946,15 +942,15 @@ msgstr ""
 "Deze feature werkt alleen wanneer GCode is gemaakt vanuit Cura nieuwer dan "\r
 "versie 12.07"\r
 \r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:520\r
 msgid "Profile load error"\r
 msgstr "Fout bij het laden van het profiel"\r
 \r
-#: Cura/gui/mainWindow.py:513\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r
 msgid "Select profile file to save"\r
 msgstr "Selecteer een profiel om op te slaan"\r
 \r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
 msgid ""\r
 "This will reset all profile settings to defaults.\n"\r
 "Unless you have saved your current profile, all settings will be lost!\n"\r
@@ -965,11 +961,22 @@ msgstr ""
 "opgeslagen!\n"\r
 "Wil je echt herstellen?"\r
 \r
-#: Cura/gui/mainWindow.py:523\r
+#: Cura/gui/mainWindow.py:544\r
 msgid "Profile reset"\r
 msgstr "Profiel herstellen"\r
 \r
-#: Cura/gui/mainWindow.py:543\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+#, fuzzy\r
+msgid "Profile copy"\r
+msgstr "Profiel herstellen"\r
+\r
+#: Cura/gui/mainWindow.py:572\r
 msgid ""\r
 "Warning: Installing a custom firmware does not guarantee that you machine "\r
 "will function correctly, and could damage your machine."\r
@@ -977,27 +984,27 @@ msgstr ""
 "Let op: Wanneer je je eigen firmware installeert, zou je machine niet goed "\r
 "kunnen werken en zou je je printer kunnen beschadigen."\r
 \r
-#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r
 msgid "Open firmware to upload"\r
 msgstr "Open firmware om te installeren"\r
 \r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
 msgid "You are running the latest version of Cura!"\r
 msgstr "Je hebt de nieuwste versie van Cura!"\r
 \r
-#: Cura/gui/mainWindow.py:616\r
+#: Cura/gui/mainWindow.py:645\r
 msgid "Awesome!"\r
 msgstr "Te gek!"\r
 \r
-#: Cura/gui/mainWindow.py:661\r
+#: Cura/gui/mainWindow.py:690\r
 msgid "Basic"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:665\r
+#: Cura/gui/mainWindow.py:694\r
 msgid "Advanced"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:671\r
+#: Cura/gui/mainWindow.py:700\r
 msgid "Plugins"\r
 msgstr "Plugins"\r
 \r
@@ -1022,79 +1029,83 @@ msgstr "Selecteer eerst een plugin om toe te voegen..."
 msgid "Error: no plugin selected"\r
 msgstr "Fout: geen plugin geselecteerd"\r
 \r
-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r
 #, fuzzy\r
 msgid "Preferences"\r
 msgstr "Voorkeuren...\tCTRL+,"\r
 \r
-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r
 #, fuzzy\r
 msgid "Print window"\r
 msgstr "Printen"\r
 \r
-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r
 msgid "Colours"\r
 msgstr "Kleuren"\r
 \r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r
 msgid "Language"\r
 msgstr "Taal"\r
 \r
-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r
 msgid "Filament settings"\r
 msgstr "Filamentinstellingen"\r
 \r
-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r
 msgid "Cura settings"\r
 msgstr "Cura"\r
 \r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
 # Suggestions: Machine settings -> General properties?\r
-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r
 msgid "Machine settings"\r
 msgstr "Algemene eigenschappen"\r
 \r
-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r
 msgid "Printer head size"\r
 msgstr "Afmetingen printkop"\r
 \r
-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r
 #, python-format\r
 msgid "Extruder %d"\r
 msgstr "Extrusie %d"\r
 \r
-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r
 msgid "Communication settings"\r
 msgstr "Communicatieinstellingen"\r
 \r
-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r
 msgid "Ok"\r
 msgstr ""\r
 \r
-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r
 #, fuzzy\r
 msgid "Add new machine"\r
 msgstr "Voeg een nieuwe machine toe..."\r
 \r
-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r
 #, fuzzy\r
 msgid "Remove machine"\r
 msgstr "Selecteer je machine"\r
 \r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r
 #, fuzzy\r
 msgid "Change machine name"\r
 msgstr "Machine naam"\r
 \r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
 msgid "Cannot remove the last machine configuration in Cura"\r
 msgstr "Kan de laatste machineconfiguratie niet verwijderen in Cura"\r
 \r
 # Suggestie: "Error removing machine"\r
-#: Cura/gui/preferencesDialog.py:153\r
+#: Cura/gui/preferencesDialog.py:182\r
 msgid "Machine remove error"\r
 msgstr "Fout bij verwijderen van machine"\r
 \r
-#: Cura/gui/preferencesDialog.py:167\r
+#: Cura/gui/preferencesDialog.py:196\r
 msgid "Enter the new name:"\r
 msgstr ""\r
 \r
@@ -1125,7 +1136,7 @@ msgstr ""
 msgid "Connect"\r
 msgstr "Verbinden"\r
 \r
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r
 msgid "Print"\r
 msgstr "Printen"\r
 \r
@@ -1141,225 +1152,220 @@ msgstr "Annuleer print"
 msgid "Error log"\r
 msgstr "Foutmelding log"\r
 \r
-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r
 msgid "Load"\r
 msgstr "Laden..."\r
 \r
-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r
 msgid "Rotate"\r
 msgstr "Draaien"\r
 \r
-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r
 msgid "Scale"\r
 msgstr "Verschalen"\r
 \r
-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r
 msgid "Mirror"\r
 msgstr "Spiegelen"\r
 \r
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r
 msgid "Reset"\r
 msgstr "Herstel"\r
 \r
-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r
 msgid "Lay flat"\r
 msgstr "Leg plat"\r
 \r
-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r
 msgid "To max"\r
 msgstr "Maximaal"\r
 \r
-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r
 msgid "Mirror X"\r
 msgstr "Spiegel X"\r
 \r
-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r
 msgid "Mirror Y"\r
 msgstr "Spiegel Y"\r
 \r
-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r
 msgid "Mirror Z"\r
 msgstr "Spiegel Z"\r
 \r
-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r
 msgid "Scale X"\r
 msgstr "Verschaal X"\r
 \r
-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r
 msgid "Scale Y"\r
 msgstr "Verschaal Y"\r
 \r
-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r
 msgid "Scale Z"\r
 msgstr "Verschaal Z"\r
 \r
-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r
 msgid "Size X (mm)"\r
 msgstr "Afmeting X (mm)"\r
 \r
-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r
 msgid "Size Y (mm)"\r
 msgstr "Afmeting Y (mm)"\r
 \r
-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r
 msgid "Size Z (mm)"\r
 msgstr "Afmeting Z (mm)"\r
 \r
-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r
 msgid "Uniform scale"\r
 msgstr "Uniform verschalen"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "View mode"\r
 msgstr "Weergavetype"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "Normal"\r
 msgstr "Normaal"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "Overhang"\r
 msgstr "Overhang"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "Transparent"\r
 msgstr "Transparant"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "X-Ray"\r
 msgstr "Röntgen"\r
 \r
-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r
 msgid "Layers"\r
 msgstr "Lagen"\r
 \r
-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r
 msgid "Share on YouMagine"\r
 msgstr "Deel op YouMagine..."\r
 \r
-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r
 msgid "Open 3D model"\r
 msgstr "Open 3D model"\r
 \r
-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r
 msgid "Save 3D model"\r
 msgstr "Sla 3D model op"\r
 \r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r
 #, fuzzy, python-format\r
 msgid "Print with %s"\r
 msgstr "Print via USB..."\r
 \r
-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r
 msgid "Slice engine log..."\r
 msgstr "Slicer log..."\r
 \r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r
 msgid "Save toolpath"\r
 msgstr "Sla toolpad op..."\r
 \r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
 msgid "The slicing engine reported the following"\r
 msgstr "De slicer geeft de volgende melding"\r
 \r
-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r
 msgid "Engine log..."\r
 msgstr "Logboek..."\r
 \r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
 msgid "How many copies do you want?"\r
 msgstr "Hoeveel exemplaren wilt u?"\r
 \r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
 msgid "Number of copies"\r
 msgstr "Aantal exemplaren"\r
 \r
-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r
 #, fuzzy\r
 msgid "Multiply"\r
 msgstr "Vermenigvuldig object"\r
 \r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r
 msgid "Center on platform"\r
 msgstr "Centreer op platform"\r
 \r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r
 msgid "Delete object"\r
 msgstr "Verwijder object"\r
 \r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r
 msgid "Multiply object"\r
 msgstr "Vermenigvuldig object"\r
 \r
-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r
 msgid "Split object into parts"\r
 msgstr "Deel object op in onderdelen"\r
 \r
-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r
 msgid "Dual extrusion merge"\r
 msgstr "Voeg duo extrusie samen"\r
 \r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r
 msgid "Delete all objects"\r
 msgstr "Verwijder alle objecten"\r
 \r
-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r
 #, fuzzy\r
 msgid "Reload all objects"\r
 msgstr "Verwijder alle objecten"\r
 \r
+#: Cura/gui/sceneView.py:866\r
+#, fuzzy\r
+msgid "Reset all objects positions"\r
+msgstr "Verwijder alle objecten"\r
+\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r
+msgstr ""\r
+\r
 # Misschien GCode noemen in plaats van Toolpath\r
-#: Cura/gui/sceneView.py:912\r
+#: Cura/gui/sceneView.py:991\r
 msgid "Toolpath to SD"\r
 msgstr "Toolpad naar SD-kaart"\r
 \r
-#: Cura/gui/sceneView.py:1206\r
+#: Cura/gui/sceneView.py:1285\r
 msgid "Overhang view not working due to lack of OpenGL shaders support."\r
 msgstr ""\r
 "De voorvertoning van de overhang is niet mogelijk omdat OpenGL dit niet "\r
 "ondersteunt."\r
 \r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
-msgstr "Hoge kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
-msgstr "Normale kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
-msgstr "Snelle, lage kwaliteit"\r
-\r
-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
-msgstr "Dunwandig kopje of vaas"\r
-\r
-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r
 msgid "Print support structure"\r
 msgstr "Print ondersteuningsmateriaal"\r
 \r
-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r
 #, fuzzy\r
 msgid "Select a quickprint profile:"\r
 msgstr "Selecteer een printmodus:"\r
 \r
-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r
 msgid "Material:"\r
 msgstr "Materiaal:"\r
 \r
-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr "Diameter:"\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r
 msgid "Other:"\r
 msgstr "Anders:"\r
 \r
-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr "Alleen de buitenkant"\r
-\r
 #: Cura/gui/tools/imageToMesh.py:28\r
 #, fuzzy\r
 msgid "Height (mm)"\r
@@ -1567,7 +1573,11 @@ msgstr ""
 msgid "Webcam error"\r
 msgstr ""\r
 \r
-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r
 #, fuzzy, python-format\r
 msgid "Loading toolpath for visualization (%d%%)"\r
 msgstr "Bezig met toolpad laden voor visualisatie..."\r
@@ -1581,8 +1591,8 @@ msgid "3D window error"
 msgstr "Fout in 3D venster"\r
 \r
 #: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
 msgid "Quality"\r
 msgstr "Kwaliteit"\r
 \r
@@ -1616,6 +1626,12 @@ msgstr ""
 "Dit wordt gebruikt in combinatie met de afmeting van de printkop om het\n"\r
 "aantal lijnen en de dikte van deze lijnen te bepalen."\r
 \r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr "Retractie"\r
+\r
 #: Cura/util/profile.py:180\r
 msgid "Enable retraction"\r
 msgstr "Retractie inschakelen"\r
@@ -1650,6 +1666,11 @@ msgstr ""
 "laagdikte. Voor een gelijke verdeling van de sterkte van het onderdeel is "\r
 "het aan te raden deze waarde ongeveer gelijk te laten zijn aan de wanddikte."\r
 \r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr "Vulling"\r
+\r
 #: Cura/util/profile.py:182\r
 msgid "Fill Density (%)"\r
 msgstr "Dichtheid vulling (%)"\r
@@ -1681,6 +1702,7 @@ msgstr ""
 \r
 #: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
 #: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
 msgid "Speed and Temperature"\r
 msgstr "Snelheid en Temperatuur"\r
 \r
@@ -1705,7 +1727,7 @@ msgid "Printing temperature (C)"
 msgstr "Printtemperatuur (C)"\r
 \r
 #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r
 msgid ""\r
 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
 "For PLA a value of 210C is usually used.\n"\r
@@ -1729,39 +1751,44 @@ msgid "4th nozzle temperature (C)"
 msgstr "Temperatuur 4de printkop (C)"\r
 \r
 #: Cura/util/profile.py:189\r
+#, fuzzy\r
+msgid "5th nozzle temperature (C)"\r
+msgstr "Temperatuur 3de printkop (C)"\r
+\r
+#: Cura/util/profile.py:190\r
 msgid "Bed temperature (C)"\r
 msgstr "Temperatuur platform (C)"\r
 \r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r
 msgid ""\r
 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
 msgstr ""\r
 "Temperatuur voor een verwarmd platform. Voer 0 in wanneer je zelf handmatig "\r
 "voorverwarmt."\r
 \r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
 msgid "None"\r
 msgstr "Geen"\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
 msgid "Touching buildplate"\r
 msgstr "Contact met platform"\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
 msgid "Everywhere"\r
 msgstr "Overal"\r
 \r
-#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
-#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r
 msgid "Support"\r
 msgstr "Ondersteuning"\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
 msgid "Support type"\r
 msgstr "Soort ondersteuning"\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191\r
 msgid ""\r
 "Type of support structure build.\n"\r
 "\"Touching buildplate\" is the most commonly used support setting.\n"\r
@@ -1776,22 +1803,27 @@ msgstr ""
 "\"Geen\" wanneer je nergens ondersteuning wilt gebruiken.\n"\r
 "\"Overal\" genereert ook ondersteuning in een model zelf."\r
 \r
-#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r
 msgid "Brim"\r
 msgstr "Boord"\r
 \r
-#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
-#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
 #: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
 #: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
 msgid "Raft"\r
 msgstr "Mat"\r
 \r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
 msgid "Platform adhesion type"\r
 msgstr "Type adhesie aan platform"\r
 \r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:192\r
 #, fuzzy\r
 msgid ""\r
 "Different options that help in preventing corners from lifting due to "\r
@@ -1809,23 +1841,23 @@ msgstr ""
 "\"Raft\" voegt een raster toe tussen het platform en het object.\n"\r
 "(Let op: Als brim of raft aan staan wordt \"skirt\" uitgezet)"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
 msgid "Both"\r
 msgstr "Beide"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
 msgid "First extruder"\r
 msgstr "Eerste kop"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
 msgid "Second extruder"\r
 msgstr "Tweede kop"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
 msgid "Support dual extrusion"\r
 msgstr "Ondersteuning bij duo extrusie"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:193\r
 msgid ""\r
 "Which extruder to use for support material, for break-away support you can "\r
 "use both extruders.\n"\r
@@ -1841,16 +1873,16 @@ msgstr ""
 "meer wisselingen tussen de printkoppen, wat tijd kost.\n"\r
 "Je kan de 2de printkop ook gebruiken voor oplosbaar ondersteuningsmateriaal."\r
 \r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r
 #, fuzzy\r
 msgid "Dual extrusion"\r
 msgstr "Voeg duo extrusie samen"\r
 \r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
 msgid "Wipe&prime tower"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:194\r
 msgid ""\r
 "The wipe-tower is a tower printed on every layer when switching between "\r
 "nozzles.\n"\r
@@ -1858,11 +1890,11 @@ msgid ""
 "print the 2nd color."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
 msgid "Wipe&prime tower volume per layer (mm3)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195\r
 msgid ""\r
 "The amount of material put in the wipe/prime tower.\n"\r
 "This is done in volume because in general you want to extrude a\n"\r
@@ -1871,27 +1903,27 @@ msgid ""
 "This means that with thinner layers, your tower gets bigger."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
 msgid "Ooze shield"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196\r
 msgid ""\r
 "The ooze shield is a 1 line thick shell around the object which stands a few "\r
 "mm from the object.\n"\r
 "This shield catches any oozing from the unused nozzle in dual-extrusion."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
 msgid "Filament"\r
 msgstr "Filament"\r
 \r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
 msgid "Diameter (mm)"\r
 msgstr "Diameter (mm)"\r
 \r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:197\r
 msgid ""\r
 "Diameter of your filament, as accurately as possible.\n"\r
 "If you cannot measure this value you will have to calibrate it, a higher "\r
@@ -1902,11 +1934,11 @@ msgstr ""
 "hogere waarde betekent minder geëxtrudeerd materiaal, een lager getal zorgt "\r
 "voor minder materiaal."\r
 \r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
 msgid "Diameter2 (mm)"\r
 msgstr "Diameter2 (mm)"\r
 \r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
 msgid ""\r
 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
@@ -1914,11 +1946,11 @@ msgstr ""
 "Diameter van het filament in de 2de printkop. Voer 0 in om dezelfde diameter "\r
 "te gebruiken als voor printkop 1."\r
 \r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
 msgid "Diameter3 (mm)"\r
 msgstr "Diameter3 (mm)"\r
 \r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
 msgid ""\r
 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
@@ -1926,11 +1958,11 @@ msgstr ""
 "Diameter van het filament in de 3de printkop. Voer 0 in om dezelfde diameter "\r
 "te gebruiken als voor printkop 1."\r
 \r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
 msgid "Diameter4 (mm)"\r
 msgstr "Diameter4 (mm)"\r
 \r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200\r
 msgid ""\r
 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
@@ -1938,11 +1970,25 @@ msgstr ""
 "Diameter van het filament in de 4de printkop. Voer 0 in om dezelfde diameter "\r
 "te gebruiken als voor printkop 1."\r
 \r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid "Diameter5 (mm)"\r
+msgstr "Diameter (mm)"\r
+\r
+#: Cura/util/profile.py:201\r
+#, fuzzy\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+"Diameter van het filament in de 3de printkop. Voer 0 in om dezelfde diameter "\r
+"te gebruiken als voor printkop 1."\r
+\r
+#: Cura/util/profile.py:202\r
 msgid "Flow (%)"\r
 msgstr "Vloeien (%)"\r
 \r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:202\r
 msgid ""\r
 "Flow compensation, the amount of material extruded is multiplied by this "\r
 "value"\r
@@ -1950,17 +1996,11 @@ msgstr ""
 "Compensatie van het vloeien. De hoeveelheid geëxtrudeerd materiaal wordt "\r
 "vermenigvuldigd met deze waarde."\r
 \r
-#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
-#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
-#: Cura/util/profile.py:207\r
-msgid "Retraction"\r
-msgstr "Retractie"\r
-\r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
 msgid "Speed (mm/s)"\r
 msgstr "Snelheid (mm/s)"\r
 \r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:203\r
 msgid ""\r
 "Speed at which the filament is retracted, a higher retraction speed works "\r
 "better. But a very high retraction speed can lead to filament grinding."\r
@@ -1968,11 +2008,11 @@ msgstr ""
 "Snelheid waarmee het filament wordt teruggetrokken. Een hogere snelheid "\r
 "werkt beter, maar een té hoge snelheid kan het filament beschadigen."\r
 \r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
 msgid "Distance (mm)"\r
 msgstr "Afstand (mm)"\r
 \r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
 msgid ""\r
 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
 "seems to generate good results."\r
@@ -1980,11 +2020,11 @@ msgstr ""
 "Hoeveelheid materiaal dat wordt teruggetrokken. Voer 0 in wanneer je geen "\r
 "terugtrekking wilt gebruiken. 4,5 mm geeft goede resultaten."\r
 \r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
 msgid "Dual extrusion switch amount (mm)"\r
 msgstr "Duo extrusie wissel hoeveelheid (mm)"\r
 \r
-#: Cura/util/profile.py:203\r
+#: Cura/util/profile.py:205\r
 msgid ""\r
 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
 "no retraction at all. A value of 16.0mm seems to generate good results."\r
@@ -1993,11 +2033,11 @@ msgstr ""
 "gewisseld wordt. Voer 0 in voor geen terugtrekking. 16 mm geeft over het "\r
 "algemeen goede resultaten."\r
 \r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
 msgid "Minimum travel (mm)"\r
 msgstr "Minimum doorvoer (mm)"\r
 \r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:206\r
 msgid ""\r
 "Minimum amount of travel needed for a retraction to happen at all. To make "\r
 "sure you do not get a lot of retractions in a small area."\r
@@ -2005,26 +2045,40 @@ msgstr ""
 "Minimale afstand om retractie te activeren. Dit zorgt ervoor dat je niet te "\r
 "veel terugtrekking hebt op een klein gebied."\r
 \r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
 msgid "Enable combing"\r
 msgstr "Omlopen inschakelen"\r
 \r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:207\r
+#, fuzzy\r
 msgid ""\r
 "Combing is the act of avoiding holes in the print for the head to travel "\r
-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract.  If 'All', enable combing "\r
+"on all surfaces.  If 'No Skin', enable combing on all except skin surfaces."\r
 msgstr ""\r
 "\"Omlopen\" (ook wel kammen of \"comb\") is het met de printkop ontwijken "\r
 "van het passeren van gaten. Dit vermindert draden, maar de printtijd neemt "\r
 "mogelijk toe. Wanneer omlopen uit staat zal de printer altijd retractie "\r
 "toepassen en recht van begin naar het eindpunt bewegen."\r
 \r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
 msgid "Minimal extrusion before retracting (mm)"\r
 msgstr "Minimale extrusie voorafgaand aan retractie (mm)"\r
 \r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:208\r
 #, fuzzy\r
 msgid ""\r
 "The minimal amount of extrusion that needs to be done before retracting "\r
@@ -2039,23 +2093,23 @@ msgstr ""
 "Deze optie voorkomt te veel retractie op een korte afstand, omdat dat het "\r
 "filament te veel kan beschadigen of vervormen."\r
 \r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
 #, fuzzy\r
 msgid "Z hop when retracting (mm)"\r
 msgstr "Minimale extrusie voorafgaand aan retractie (mm)"\r
 \r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:209\r
 msgid ""\r
 "When a retraction is done, the head is lifted by this amount to travel over "\r
 "the print. A value of 0.075 works well. This feature has a lot of positive "\r
 "effect on delta towers."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
 msgid "Initial layer thickness (mm)"\r
 msgstr "Dikte van de eerste laag (mm)"\r
 \r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:210\r
 msgid ""\r
 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
@@ -2065,23 +2119,23 @@ msgstr ""
 "het platform hecht. Stel in op 0.0 om de eerste laag even dik te maken als "\r
 "de overige lagen."\r
 \r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
 #, fuzzy\r
 msgid "Initial layer line width (%)"\r
 msgstr "Contact lijn dikte (mm)"\r
 \r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:211\r
 msgid ""\r
 "Extra width factor for the extrusion on the first layer, on some printers "\r
 "it's good to have wider extrusion on the first layer to get better bed "\r
 "adhesion."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
 msgid "Cut off object bottom (mm)"\r
 msgstr "Model onderaan afsnijden (mm)"\r
 \r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
 msgid ""\r
 "Sinks the object into the platform, this can be used for objects that do not "\r
 "have a flat bottom and thus create a too small first layer."\r
@@ -2090,11 +2144,11 @@ msgstr ""
 "platform wordt overgeslagen. Deze optie kan gebruikt worden voor objecten "\r
 "die geen vlakke onderkant hebben en dus een te kleine eerste laag hebben."\r
 \r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
 msgid "Dual extrusion overlap (mm)"\r
 msgstr "Overlap bij duo extrusie (mm)"\r
 \r
-#: Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r
 #, fuzzy\r
 msgid ""\r
 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
@@ -2103,16 +2157,16 @@ msgstr ""
 "Om een betere hechting tussen verschillende kleuren/materialen te krijgen "\r
 "bij duo extrusie voeg je een hoeveelheid overlap toe."\r
 \r
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
-#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r
 msgid "Speed"\r
 msgstr "Snelheid:"\r
 \r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
 msgid "Travel speed (mm/s)"\r
 msgstr "Verplaats snelheid (mm/s)"\r
 \r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:215\r
 #, fuzzy\r
 msgid ""\r
 "Speed at which travel moves are done, a well built Ultimaker can reach "\r
@@ -2122,11 +2176,11 @@ msgstr ""
 "Ultimaker kan tot 250 mm/s behalen. Sommige machines zullen dan stappen gaan "\r
 "overslaan."\r
 \r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
 msgid "Bottom layer speed (mm/s)"\r
 msgstr "Snelheid voor de eerste laag (mm/s)"\r
 \r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:216\r
 msgid ""\r
 "Print speed for the bottom layer, you want to print the first layer slower "\r
 "so it sticks better to the printer bed."\r
@@ -2134,11 +2188,11 @@ msgstr ""
 "Printsnelheid voor de eerste laag. De eerste laag kan je beter langzamer "\r
 "printen, zodat deze goed aan het platform hecht."\r
 \r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
 msgid "Infill speed (mm/s)"\r
 msgstr "Snelheid voor vulling (mm/s)"\r
 \r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:217\r
 #, fuzzy\r
 msgid ""\r
 "Speed at which infill parts are printed. If set to 0 then the print speed is "\r
@@ -2150,12 +2204,29 @@ msgstr ""
 "print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
 "kwaliteit negatief beïnvloeden."\r
 \r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr "Snelheid voor de eerste laag (mm/s)"\r
+\r
+#: Cura/util/profile.py:218\r
+#, fuzzy\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+"Snelheid waarmee de vulling wordt geprint. Wanneer hier 0 wordt ingevuld, "\r
+"wordt de vulling met de printsnelheid geprint. Wanneer je de vulling sneller "\r
+"print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
+"kwaliteit negatief beïnvloeden."\r
+\r
+#: Cura/util/profile.py:219\r
 #, fuzzy\r
 msgid "Outer shell speed (mm/s)"\r
 msgstr "Verplaats snelheid (mm/s)"\r
 \r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:219\r
 msgid ""\r
 "Speed at which outer shell is printed. If set to 0 then the print speed is "\r
 "used. Printing the outer shell at a lower speed improves the final skin "\r
@@ -2163,12 +2234,12 @@ msgid ""
 "and the outer shell speed will effect quality in a negative way."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
 #, fuzzy\r
 msgid "Inner shell speed (mm/s)"\r
 msgstr "Snelheid voor vulling (mm/s)"\r
 \r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:220\r
 #, fuzzy\r
 msgid ""\r
 "Speed at which inner shells are printed. If set to 0 then the print speed is "\r
@@ -2181,17 +2252,17 @@ msgstr ""
 "print, kan dit de printsnelheid enorm verlagen, maar het kan ook de "\r
 "kwaliteit negatief beïnvloeden."\r
 \r
-#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
-#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r
 msgid "Cool"\r
 msgstr "Koeling"\r
 \r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
 msgid "Minimal layer time (sec)"\r
 msgstr "Minimale tijd per laag (sec)"\r
 \r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:221\r
 #, fuzzy\r
 msgid ""\r
 "Minimum time spent in a layer, gives the layer time to cool down before the "\r
@@ -2203,11 +2274,11 @@ msgstr ""
 "volgende laag erop gelegd wordt. De printer zal langzamer bewegen om de "\r
 "ingestelde minimale tijd aan een laag te besteden."\r
 \r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
 msgid "Enable cooling fan"\r
 msgstr "Koelventilator(s) aanzetten"\r
 \r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:222\r
 msgid ""\r
 "Enable the cooling fan during the print. The extra cooling from the cooling "\r
 "fan is essential during faster prints."\r
@@ -2215,15 +2286,11 @@ msgstr ""
 "Zet de koelventilator(s) aan tijdens het printen. Extra koeling van de "\r
 "koelventilator(s) is essentieel bij sneller printen."\r
 \r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Skirt"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
 msgid "Line count"\r
 msgstr "Aantal lijnen"\r
 \r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:224\r
 msgid ""\r
 "The skirt is a line drawn around the object at the first layer. This helps "\r
 "to prime your extruder, and to see if the object fits on your platform.\n"\r
@@ -2237,11 +2304,11 @@ msgstr ""
 "Wanneer je 0 invult begint de printer direct aan het object. Meerdere zomen "\r
 "zijn aan te raden bij kleine objecten."\r
 \r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
 msgid "Start distance (mm)"\r
 msgstr "Start afstand (mm)"\r
 \r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:225\r
 msgid ""\r
 "The distance between the skirt and the first layer.\n"\r
 "This is the minimal distance, multiple skirt lines will be put outwards from "\r
@@ -2251,11 +2318,11 @@ msgstr ""
 "Dit is de afstand van de eerste lus, de volgende lussen zullen verder van "\r
 "het object af gelegd worden."\r
 \r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
 msgid "Minimal length (mm)"\r
 msgstr "Mimale lengte (mm)"\r
 \r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:226\r
 msgid ""\r
 "The minimal length of the skirt, if this minimal length is not reached it "\r
 "will add more skirt lines to reach this minimal lenght.\n"\r
@@ -2266,12 +2333,12 @@ msgstr ""
 "Let op: Wanneer het aantal lijnen op 0 staat, wordt deze waarde genegeerd."\r
 \r
 # Idem width\r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
 #, fuzzy\r
 msgid "Fan full on at height (mm)"\r
 msgstr "Machine hoogte (mm)"\r
 \r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:227\r
 #, fuzzy\r
 msgid ""\r
 "The height at which the fan is turned on completely. For the layers below "\r
@@ -2280,11 +2347,11 @@ msgstr ""
 "De laag vanaf welke de koeling aangezet wordt. De eerste laag is laag 0. De "\r
 "eerste laag hecht beter wanneer de koeling uit staat."\r
 \r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
 msgid "Fan speed min (%)"\r
 msgstr "Minimale snelheid koelventilator (%)"\r
 \r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:228\r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
@@ -2295,11 +2362,11 @@ msgstr ""
 "wordt de ventilatorsnelheid gevarieerd tussen de minimale en maximale "\r
 "snelheid."\r
 \r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
 msgid "Fan speed max (%)"\r
 msgstr "Maximale snelheid koelventilator (%)"\r
 \r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:229\r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
@@ -2309,11 +2376,11 @@ msgstr ""
 "Wanneer de snelheid per laag 200% lager is dan de gewone printsnelheid, "\r
 "wordt de maximale snelheid van de koelventilator gebruikt."\r
 \r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
 msgid "Minimum speed (mm/s)"\r
 msgstr "Minimale snelheid (mm/s)"\r
 \r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:230\r
 #, fuzzy\r
 msgid ""\r
 "The minimal layer time can cause the print to slow down so much it starts to "\r
@@ -2325,11 +2392,11 @@ msgstr ""
 "wanneer de printer langzamer gaat, zal dit nooit langzamer zijn dan deze "\r
 "snelheid."\r
 \r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
 msgid "Cool head lift"\r
 msgstr "Printkop optrekken voor koeling"\r
 \r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:231\r
 msgid ""\r
 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
 "the extra time so the minimal layer time is always hit."\r
@@ -2338,15 +2405,11 @@ msgstr ""
 "de machine wachten tot de minimale tijd per laag is bereikt voordat de "\r
 "volgende laag geprint wordt."\r
 \r
-#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
-msgid "Infill"\r
-msgstr "Vulling"\r
-\r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
 msgid "Solid infill top"\r
 msgstr "Opvulling van bovenste lagen"\r
 \r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:232\r
 msgid ""\r
 "Create a solid top surface, if set to false the top is filled with the fill "\r
 "percentage. Useful for cups/vases."\r
@@ -2355,11 +2418,11 @@ msgstr ""
 "geprint worden (ideaal voor kopjes en vazen). Zet een vinkje voor een dichte "\r
 "bovenkant."\r
 \r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
 msgid "Solid infill bottom"\r
 msgstr "Opvulling van onderste lagen"\r
 \r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:233\r
 msgid ""\r
 "Create a solid bottom surface, if set to false the bottom is filled with the "\r
 "fill percentage. Useful for buildings."\r
@@ -2367,11 +2430,11 @@ msgstr ""
 "Zorgt voor een dichte bodemlaag. Wanneer je hier geen vinkje zet, wordt de "\r
 "bodem geprint met het vulpercentage (ideaal voor gebouwen)."\r
 \r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
 msgid "Infill overlap (%)"\r
 msgstr "Overlap van vulling (%)"\r
 \r
-#: Cura/util/profile.py:231\r
+#: Cura/util/profile.py:234\r
 msgid ""\r
 "Amount of overlap between the infill and the walls. There is a slight "\r
 "overlap with the walls and the infill so the walls connect firmly to the "\r
@@ -2380,12 +2443,12 @@ msgstr ""
 "Hoeveelheid overlap tussen de vulling en de wanden. Voor een goede hechting "\r
 "tussen de wanden en de vulling pas je een kleine overlap toe."\r
 \r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
 #, fuzzy\r
 msgid "Structure type"\r
 msgstr "Soort ondersteuning"\r
 \r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:235\r
 msgid ""\r
 "The type of support structure.\n"\r
 "Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
@@ -2395,21 +2458,21 @@ msgid ""
 "prints."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
 msgid "Overhang angle for support (deg)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:236\r
 msgid ""\r
 "The minimal angle that overhangs need to have to get support. With 90 degree "\r
 "being horizontal and 0 degree being vertical."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
 msgid "Fill amount (%)"\r
 msgstr "Hoeveelheid vulling (%)"\r
 \r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:237\r
 #, fuzzy, python-format\r
 msgid ""\r
 "Amount of infill structure in the support material, less material gives "\r
@@ -2419,11 +2482,11 @@ msgstr ""
 "ondersteuning die makkelijker te verwijderen is. 20% is over het algemeen "\r
 "goed."\r
 \r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
 msgid "Distance X/Y (mm)"\r
 msgstr "Afstand X/Y (mm)"\r
 \r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:238\r
 msgid ""\r
 "Distance of the support material from the print, in the X/Y directions.\n"\r
 "0.7mm gives a nice distance from the print so the support does not stick to "\r
@@ -2434,11 +2497,11 @@ msgstr ""
 "0,7 mm is een goede afstand die voorkomt dat de ondersteuning te goed hecht "\r
 "aan het model."\r
 \r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
 msgid "Distance Z (mm)"\r
 msgstr "Afstand Z (mm)"\r
 \r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:239\r
 msgid ""\r
 "Distance from the top/bottom of the support to the print. A small gap here "\r
 "makes it easier to remove the support but makes the print a bit uglier.\n"\r
@@ -2450,15 +2513,15 @@ msgstr ""
 "0,15 mm. is een goede afstand waarbij het ondersteuningsmateriaal makkelijk "\r
 "te verwijderen is."\r
 \r
-#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
 msgid "Black Magic"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
 msgid "Spiralize the outer contour"\r
 msgstr "Buitencontour spiraliseren"\r
 \r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:240\r
 #, fuzzy\r
 msgid ""\r
 "Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
@@ -2470,21 +2533,21 @@ msgstr ""
 "zal leiden tot een constante Z stijging over de gehele print. Met deze "\r
 "functie wordt een vast voorwerp een één wandige print met een stevige bodem."\r
 \r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
 msgid "Only follow mesh surface"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:241\r
 msgid ""\r
 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
 "infill, no top/bottom, nothing."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
 msgid "Brim line amount"\r
 msgstr "Hoeveelheid boorden"\r
 \r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:243\r
 msgid ""\r
 "The amount of lines used for a brim, more lines means a larger brim which "\r
 "sticks better, but this also makes your effective print area smaller."\r
@@ -2493,11 +2556,11 @@ msgstr ""
 "een grotere kleefrand, maar dit zorgt ook dat je printoppervlak kleiner "\r
 "wordt."\r
 \r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
 msgid "Extra margin (mm)"\r
 msgstr "Extra marge (mm)"\r
 \r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:244\r
 #, fuzzy\r
 msgid ""\r
 "If the raft is enabled, this is the extra raft area around the object which "\r
@@ -2508,33 +2571,33 @@ msgstr ""
 "ingeschakeld. Wanneer je deze marge vergroot gebruik je meer materiaal en "\r
 "krijg je een sterkere raft. Dit laat minder ruimte over voor je print."\r
 \r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
 msgid "Line spacing (mm)"\r
 msgstr "Afstand tussen lijnen (mm)"\r
 \r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:245\r
 msgid ""\r
 "When you are using the raft this is the distance between the centerlines of "\r
 "the raft line."\r
 msgstr ""\r
 "Wanneer je een mat gebruikt, is dit de afstand tussen de lijnen van de mat."\r
 \r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
 msgid "Base thickness (mm)"\r
 msgstr "Dikte basis (mm)"\r
 \r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:246\r
 msgid ""\r
 "When you are using the raft this is the thickness of the base layer which is "\r
 "put down."\r
 msgstr ""\r
 "Wanneer je een mat gebruikt is dit de dikte van de eerste laag van de mat."\r
 \r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
 msgid "Base line width (mm)"\r
 msgstr "Basis lijn breedte (mm)"\r
 \r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:247\r
 msgid ""\r
 "When you are using the raft this is the width of the base layer lines which "\r
 "are put down."\r
@@ -2542,11 +2605,11 @@ msgstr ""
 "Wanneer je een mat gebruikt is dit de breedte van de lijnen van de eerste "\r
 "laag van de mat."\r
 \r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
 msgid "Interface thickness (mm)"\r
 msgstr "Contact dikte (mm)"\r
 \r
-#: Cura/util/profile.py:245\r
+#: Cura/util/profile.py:248\r
 msgid ""\r
 "When you are using the raft this is the thickness of the interface layer "\r
 "which is put down."\r
@@ -2554,11 +2617,11 @@ msgstr ""
 "Wanneer je een mat gebruikt is dit de dikte van de contactlaag met het "\r
 "object."\r
 \r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
 msgid "Interface line width (mm)"\r
 msgstr "Contact lijn dikte (mm)"\r
 \r
-#: Cura/util/profile.py:246\r
+#: Cura/util/profile.py:249\r
 msgid ""\r
 "When you are using the raft this is the width of the interface layer lines "\r
 "which are put down."\r
@@ -2566,63 +2629,63 @@ msgstr ""
 "Wanneer je een mat gebruikt is dit de breedte van de lijn van de contactlaag "\r
 "met het object."\r
 \r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
 msgid "Airgap"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:247\r
+#: Cura/util/profile.py:250\r
 msgid "Gap between the last layer of the raft the whole print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
 msgid "First Layer Airgap"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:248\r
+#: Cura/util/profile.py:251\r
 msgid ""\r
 "Gap between the last layer of the raft and the first printing layer. A small "\r
 "gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
 "value is added on top of the 'Airgap' setting."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
 msgid "Surface layers"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:249\r
+#: Cura/util/profile.py:252\r
 msgid ""\r
 "Amount of surface layers put on top of the raft, these are fully filled "\r
 "layers on which the model is printed."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
 #, fuzzy\r
 msgid "Surface layer thickness (mm)"\r
 msgstr "Dikte van de eerste laag (mm)"\r
 \r
-#: Cura/util/profile.py:250\r
+#: Cura/util/profile.py:253\r
 msgid "Thickness of each surface layer."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
 #, fuzzy\r
 msgid "Surface layer line width (mm)"\r
 msgstr "Contact lijn dikte (mm)"\r
 \r
-#: Cura/util/profile.py:251\r
+#: Cura/util/profile.py:254\r
 msgid "Width of the lines for each surface layer."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r
 msgid "Fix horrible"\r
 msgstr "Repareer een dramatisch model"\r
 \r
-#: Cura/util/profile.py:252\r
+#: Cura/util/profile.py:255\r
 msgid "Combine everything (Type-A)"\r
 msgstr "Combineer alles (Type-A)"\r
 \r
-#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r
 #, fuzzy\r
 msgid ""\r
 "This expert option adds all parts of the model together. The result is "\r
@@ -2638,15 +2701,15 @@ msgstr ""
 "gaten in tact te laten. Type-B negeert alle interne gaten en behoudt alleen "\r
 "de buitenste vorm per laag."\r
 \r
-#: Cura/util/profile.py:253\r
+#: Cura/util/profile.py:256\r
 msgid "Combine everything (Type-B)"\r
 msgstr "Combineer alles (Type-B)"\r
 \r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
 msgid "Keep open faces"\r
 msgstr "Behoudt open vlakken"\r
 \r
-#: Cura/util/profile.py:254\r
+#: Cura/util/profile.py:257\r
 #, fuzzy\r
 msgid ""\r
 "This expert option keeps all the open bits of the model intact. Normally "\r
@@ -2666,11 +2729,11 @@ msgstr ""
 "Zoals met alle \"Repareer een dramatisch model\" opties, zullen resultaten "\r
 "variëren en is het gebruik van deze opties op eigen risico."\r
 \r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
 msgid "Extensive stitching"\r
 msgstr "Uitgebreid hechten"\r
 \r
-#: Cura/util/profile.py:255\r
+#: Cura/util/profile.py:258\r
 #, fuzzy\r
 msgid ""\r
 "Extensive stitching tries to fix up open holes in the model by closing the "\r
@@ -2685,42 +2748,42 @@ msgstr ""
 "Zoals met alle \"Repareer een dramatisch model\" opties, zullen resultaten "\r
 "variëren en is het gebruik van deze opties op eigen risico."\r
 \r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
 msgid "Save profile on slice"\r
 msgstr "Bewaar het profiel wanneer je slicet."\r
 \r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:486\r
 msgid ""\r
 "When slicing save the profile as [stl_file]_profile.ini next to the model."\r
 msgstr ""\r
 "Sla ook meteen het profiel op als [stl_file]_profile.ini wanneer je slicet."\r
 \r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
 msgid "Cost (price/kg)"\r
 msgstr "Kosten (prijs/kg)"\r
 \r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:487\r
 msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
 msgstr ""\r
 "Kosten van je filament per kg om de kosten van je uiteindelijke print te "\r
 "kunnen inschatten."\r
 \r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
 msgid "Cost (price/m)"\r
 msgstr "Kosten (prijs/m)"\r
 \r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:488\r
 msgid ""\r
 "Cost of your filament per meter, to estimate the cost of the final print."\r
 msgstr ""\r
 "Kosten van je filament per meter om de kosten van je uiteindelijke print te "\r
 "kunnen inschatten."\r
 \r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
 msgid "Auto detect SD card drive"\r
 msgstr "Detecteer automatisch de aanwezigheid van een SD kaartlezer"\r
 \r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:489\r
 msgid ""\r
 "Auto detect the SD card. You can disable this because on some systems "\r
 "external hard-drives or USB sticks are detected as SD card."\r
@@ -2729,30 +2792,42 @@ msgstr ""
 "sommige systemen zullen externe harde schijven of USB's als SD kaart gezien "\r
 "worden."\r
 \r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r
 msgid "Check for updates"\r
 msgstr "Controleer of er updates zijn"\r
 \r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:502\r
 msgid "Check for newer versions of Cura on startup"\r
 msgstr "Controleer of er een nieuwe versie van Cura is tijdens het opstarten"\r
 \r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
 msgid "Send usage statistics"\r
 msgstr "Verstuur gebruiks statistieken"\r
 \r
-#: Cura/util/profile.py:486\r
+#: Cura/util/profile.py:503\r
 #, fuzzy\r
 msgid "Submit anonymous usage information to improve future versions of Cura"\r
 msgstr ""\r
 "Verstuur anonieme gebruiksinformatie om de volgende versie van Cura te "\r
 "verbeteren"\r
 \r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
 msgid "Density (kg/m3)"\r
 msgstr "Dichtheid (kg/m3)"\r
 \r
-#: Cura/util/profile.py:488\r
+#: Cura/util/profile.py:505\r
 msgid ""\r
 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
 "This value is used to estimate the weight if the filament used for the print."\r
@@ -2761,88 +2836,88 @@ msgstr ""
 "Deze waarde wordt gebruikt om het gewicht van de uiteindelijke print te "\r
 "schatten."\r
 \r
-#: Cura/util/profile.py:489\r
+#: Cura/util/profile.py:506\r
 msgid ""\r
 "Change the language in which Cura runs. Switching language requires a "\r
 "restart of Cura"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
 msgid "Model colour"\r
 msgstr "Model kleur"\r
 \r
-#: Cura/util/profile.py:492\r
+#: Cura/util/profile.py:509\r
 msgid "Display color for first extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
 msgid "Model colour (2)"\r
 msgstr "Model kleur (2)"\r
 \r
-#: Cura/util/profile.py:493\r
+#: Cura/util/profile.py:510\r
 msgid "Display color for second extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
 msgid "Model colour (3)"\r
 msgstr "Model kleur (3)"\r
 \r
-#: Cura/util/profile.py:494\r
+#: Cura/util/profile.py:511\r
 msgid "Display color for third extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
 msgid "Model colour (4)"\r
 msgstr "Model kleur (4)"\r
 \r
-#: Cura/util/profile.py:495\r
+#: Cura/util/profile.py:512\r
 msgid "Display color for forth extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
 msgid "Printing window type"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:496\r
+#: Cura/util/profile.py:513\r
 msgid "Select the interface used for USB printing."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:508\r
+#: Cura/util/profile.py:525\r
 msgid "Maximum width (mm)"\r
 msgstr "Maximale breedte (mm)"\r
 \r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r
 msgid "Size of the machine in mm"\r
 msgstr "Afmeting van de machine in mm"\r
 \r
-#: Cura/util/profile.py:509\r
+#: Cura/util/profile.py:526\r
 msgid "Maximum depth (mm)"\r
 msgstr "Maximale diepte (mm)"\r
 \r
-#: Cura/util/profile.py:510\r
+#: Cura/util/profile.py:527\r
 msgid "Maximum height (mm)"\r
 msgstr "Maximale hoogte (mm)"\r
 \r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
 #, fuzzy\r
 msgid "Machine center 0,0"\r
 msgstr "Machine naam"\r
 \r
-#: Cura/util/profile.py:511\r
+#: Cura/util/profile.py:528\r
 msgid ""\r
 "Machines firmware defines the center of the bed as 0,0 instead of the front "\r
 "left corner."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
 msgid "Build area shape"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:529\r
 msgid "The shape of machine build area."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:514\r
+#: Cura/util/profile.py:531\r
 msgid ""\r
 "If you have an heated bed, this enabled heated bed settings (requires "\r
 "restart)"\r
@@ -2850,11 +2925,11 @@ msgstr ""
 "Wanneer je een verwarmd platform hebt, zet deze vink de opties hiervoor aan. "\r
 "Je dient Cura wel opnieuw op te starten."\r
 \r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
 msgid "GCode Flavor"\r
 msgstr "GCode soort"\r
 \r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:532\r
 #, fuzzy\r
 msgid ""\r
 "Flavor of generated GCode.\n"\r
@@ -2872,39 +2947,42 @@ msgstr ""
 "UltiGCode is een variatie van de RepRap GCode die meer instellingen in de "\r
 "machine opslaat in plaats van in de slicersoftware."\r
 \r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
 msgid "Extruder count"\r
 msgstr "Aantal printkoppen"\r
 \r
-#: Cura/util/profile.py:516\r
+#: Cura/util/profile.py:533\r
 msgid "Amount of extruders in your machine."\r
 msgstr "Aantal printkoppen op je printer"\r
 \r
-#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r
 msgid "Offset X"\r
 msgstr "X afstand"\r
 \r
-#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r
 msgid "The offset of your secondary extruder compared to the primary."\r
 msgstr "De afstand tussen de eerste en de tweede printkop."\r
 \r
-#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r
 msgid "Offset Y"\r
 msgstr "Y afstand"\r
 \r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r
 msgid "The offset of your tertiary extruder compared to the primary."\r
 msgstr "De afstand tussen de eerste en de derde printkop."\r
 \r
-#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r
 msgid "The offset of your forth extruder compared to the primary."\r
 msgstr "De afstand tussen de eerste en de vierde printkop."\r
 \r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
 msgid "E-Steps per 1mm filament"\r
 msgstr "E-stappen per 1 mm. filament"\r
 \r
-#: Cura/util/profile.py:523\r
+#: Cura/util/profile.py:542\r
 msgid ""\r
 "Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
 "ignored and the value in your firmware is used."\r
@@ -2913,19 +2991,19 @@ msgstr ""
 "Wanneer hier 0 wordt ingevoerd, wordt de waarde genegeerd en de waarde uit "\r
 "je firmware gebruikt."\r
 \r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
 msgid "Serial port"\r
 msgstr "Seriële poort"\r
 \r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:543\r
 msgid "Serial port to use for communication with the printer"\r
 msgstr "De seriële poort die gebruikt wordt voor communicatie met de printer."\r
 \r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
 msgid "Baudrate"\r
 msgstr "Baudrate"\r
 \r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:545\r
 msgid ""\r
 "Speed of the serial port communication\n"\r
 "Needs to match your firmware settings\n"\r
@@ -2935,11 +3013,11 @@ msgstr ""
 "Deze dient overeen te komen met de instellingen in je firmware \n"\r
 "Meestal 250000, 115200 of 57600"\r
 \r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
 msgid "Head size towards X min (mm)"\r
 msgstr "Minimale afmeting printkop X (mm)"\r
 \r
-#: Cura/util/profile.py:529\r
+#: Cura/util/profile.py:548\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
@@ -2950,11 +3028,11 @@ msgstr ""
 "Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
 "niet met eerdere objecten mag botsen."\r
 \r
-#: Cura/util/profile.py:530\r
+#: Cura/util/profile.py:549\r
 msgid "Head size towards Y min (mm)"\r
 msgstr "Minimale afmeting printkop Y (mm)"\r
 \r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
@@ -2965,15 +3043,15 @@ msgstr ""
 "Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
 "niet met eerdere objecten mag botsen."\r
 \r
-#: Cura/util/profile.py:531\r
+#: Cura/util/profile.py:550\r
 msgid "Head size towards X max (mm)"\r
 msgstr "Maximale afmeting X (mm)"\r
 \r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
 msgid "Head size towards Y max (mm)"\r
 msgstr "Maximale afmeting printkop Y (mm)"\r
 \r
-#: Cura/util/profile.py:532\r
+#: Cura/util/profile.py:551\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
@@ -2984,11 +3062,11 @@ msgstr ""
 "Deze waarde is belangrijk als je meerdere objecten wilt printen en de kop "\r
 "niet met eerdere objecten mag botsen."\r
 \r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
 msgid "Printer gantry height (mm)"\r
 msgstr "Hoogte printkop samenstelling (mm)"\r
 \r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:552\r
 msgid ""\r
 "The height of the gantry holding up the printer head. If an object is higher "\r
 "then this then you cannot print multiple objects one for one. 60mm for an "\r
@@ -2998,48 +3076,48 @@ msgstr ""
 "dan deze waarde, kan je niet meerdere objecten printen. Dit is 60 mm voor "\r
 "een Ultimaker."\r
 \r
-#: Cura/util/profile.py:535\r
+#: Cura/util/profile.py:554\r
 #, python-format\r
 msgid "More flow than 150% is rare and usually not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:536\r
+#: Cura/util/profile.py:555\r
 #, python-format\r
 msgid "Less flow than 50% is rare and usually not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:556\r
 #, python-format\r
 msgid ""\r
 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
 "are not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:558\r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a printing speed above "\r
 "150mm/s"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
-#: Cura/util/profile.py:544\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r
 msgid "Temperatures above 260C could damage your machine, be careful!"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
-#: Cura/util/profile.py:548\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r
 msgid ""\r
 "Are you sure your filament is that thick? Normal filament is around 3mm or "\r
 "1.75mm."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:549\r
+#: Cura/util/profile.py:575\r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a travel speed above "\r
 "300mm/s"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:550\r
+#: Cura/util/profile.py:576\r
 #, python-format\r
 msgid ""\r
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
@@ -3066,6 +3144,27 @@ msgstr ""
 msgid "%0.2f meter %0.0f gram"\r
 msgstr ""\r
 \r
+#~ msgid "Copy profile to clipboard"\r
+#~ msgstr "Kopieer profiel naar klembord"\r
+\r
+#~ msgid "High quality print"\r
+#~ msgstr "Hoge kwaliteit"\r
+\r
+#~ msgid "Normal quality print"\r
+#~ msgstr "Normale kwaliteit"\r
+\r
+#~ msgid "Fast low quality print"\r
+#~ msgstr "Snelle, lage kwaliteit"\r
+\r
+#~ msgid "Thin walled cup or vase"\r
+#~ msgstr "Dunwandig kopje of vaas"\r
+\r
+#~ msgid "Diameter:"\r
+#~ msgstr "Diameter:"\r
+\r
+#~ msgid "Exterior Only"\r
+#~ msgstr "Alleen de buitenkant"\r
+\r
 #~ msgid "Run first run wizard..."\r
 #~ msgstr "Opstartwizard..."\r
 \r