plugins: Support user configuration of default values

[cura.git] / resources / locale / Cura.pot

diff --git a/resources/locale/Cura.pot b/resources/locale/Cura.pot
index c918eabbe3c5205009e6ae6f8aaf414ef53043a9..5871ef82814c2d5d978e0df90e693fa2c48d6f85 100644 (file)
--- a/resources/locale/Cura.pot
+++ b/resources/locale/Cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""\r
 "Project-Id-Version: PACKAGE VERSION\n"\r
 "Report-Msgid-Bugs-To: \n"\r
 msgstr ""\r
 "Project-Id-Version: PACKAGE VERSION\n"\r
 "Report-Msgid-Bugs-To: \n"\r

-"POT-Creation-Date: 2014-10-28 14:06+0100\n"\r
+"POT-Creation-Date: 2015-02-04 14:38+0100\n"\r

 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"\r
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"\r
 "Language-Team: LANGUAGE <LL@li.org>\n"\r
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"\r
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"\r
 "Language-Team: LANGUAGE <LL@li.org>\n"\r


@@ -16,11 +16,11 @@ msgstr ""
 "Content-Type: text/plain; charset=CHARSET\n"\r
 "Content-Transfer-Encoding: 8bit\n"\r
 \r
 "Content-Type: text/plain; charset=CHARSET\n"\r
 "Content-Transfer-Encoding: 8bit\n"\r
 \r

-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r

 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr ""\r
 \r
 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr ""\r
 \r

-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
+#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642\r

 msgid "New version available"\r
 msgstr ""\r
 \r
 msgid "New version available"\r
 msgstr ""\r
 \r


@@ -44,23 +44,27 @@ msgstr ""
 msgid "Select your language:"\r
 msgstr ""\r
 \r
 msgid "Select your language:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:279\r
+#: Cura/gui/configWizard.py:266\r
+msgid "Older models"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:283\r

 msgid "Printrbot Selection"\r
 msgstr ""\r
 \r
 msgid "Printrbot Selection"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:280\r
+#: Cura/gui/configWizard.py:285\r

 msgid "Select which Printrbot machine you have:"\r
 msgstr ""\r
 \r
 msgid "Select which Printrbot machine you have:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:316\r
+#: Cura/gui/configWizard.py:349\r

 msgid "Other machine information"\r
 msgstr ""\r
 \r
 msgid "Other machine information"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:317\r
+#: Cura/gui/configWizard.py:350\r

 msgid "The following pre-defined machine profiles are available"\r
 msgstr ""\r
 \r
 msgid "The following pre-defined machine profiles are available"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:318\r
+#: Cura/gui/configWizard.py:351\r

 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r
 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r


@@ -69,850 +73,856 @@ msgid ""
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:329\r
+#: Cura/gui/configWizard.py:362\r

 msgid "Custom..."\r
 msgstr ""\r
 \r
 msgid "Custom..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:347\r
+#: Cura/gui/configWizard.py:380\r

 msgid "Cura Ready!"\r
 msgstr ""\r
 \r
 msgid "Cura Ready!"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:348\r
+#: Cura/gui/configWizard.py:381\r

 msgid "Cura is now ready to be used!"\r
 msgstr ""\r
 \r
 msgid "Cura is now ready to be used!"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:352\r
+#: Cura/gui/configWizard.py:385\r

 msgid "Custom RepRap information"\r
 msgstr ""\r
 \r
 msgid "Custom RepRap information"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:353\r
+#: Cura/gui/configWizard.py:386\r

 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
 "settings."\r
 msgstr ""\r
 \r
 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
 "settings."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:387\r

 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:388\r

 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
 msgstr ""\r
 \r
 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:357\r
+#: Cura/gui/configWizard.py:390\r

 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr ""\r
 \r
 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:392\r

 msgid "Machine name"\r
 msgstr ""\r
 \r
 msgid "Machine name"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:393\r

 msgid "Machine width (mm)"\r
 msgstr ""\r
 \r
 msgid "Machine width (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:394\r

 msgid "Machine depth (mm)"\r
 msgstr ""\r
 \r
 msgid "Machine depth (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:395\r

 msgid "Machine height (mm)"\r
 msgstr ""\r
 \r
 msgid "Machine height (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175\r
+#: Cura/gui/configWizard.py:396 Cura/util/profile.py:183\r

 msgid "Nozzle size (mm)"\r
 msgstr ""\r
 \r
 msgid "Nozzle size (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503\r
+#: Cura/gui/configWizard.py:397 Cura/util/profile.py:531\r

 msgid "Heated bed"\r
 msgstr ""\r
 \r
 msgid "Heated bed"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:365\r
+#: Cura/gui/configWizard.py:398\r

 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr ""\r
 \r
 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:385\r
+#: Cura/gui/configWizard.py:418\r

 msgid "Select your machine"\r
 msgstr ""\r
 \r
 msgid "Select your machine"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:386\r
+#: Cura/gui/configWizard.py:419\r

 msgid "What kind of machine do you have:"\r
 msgstr ""\r
 \r
 msgid "What kind of machine do you have:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:401\r
+#: Cura/gui/configWizard.py:438\r

 msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr ""\r
 \r
 msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:404\r
+#: Cura/gui/configWizard.py:441\r

 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:405\r
+#: Cura/gui/configWizard.py:442\r

 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
 msgstr ""\r
 \r
 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:406\r
+#: Cura/gui/configWizard.py:443\r

 msgid "Submit anonymous usage information:"\r
 msgstr ""\r
 \r
 msgid "Submit anonymous usage information:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:407\r
+#: Cura/gui/configWizard.py:444\r

 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr ""\r
 \r
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:524\r
+#: Cura/gui/configWizard.py:576\r

 msgid "Select upgraded parts you have"\r
 msgstr ""\r
 \r
 msgid "Select upgraded parts you have"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:525\r
+#: Cura/gui/configWizard.py:577\r

 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
 msgstr ""\r
 \r
 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:527\r
+#: Cura/gui/configWizard.py:579\r

 msgid "Extruder drive upgrade"\r
 msgstr ""\r
 \r
 msgid "Extruder drive upgrade"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:528\r
+#: Cura/gui/configWizard.py:580\r

 msgid "Heated printer bed (kit)"\r
 msgstr ""\r
 \r
 msgid "Heated printer bed (kit)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:529\r
+#: Cura/gui/configWizard.py:581\r

 msgid "Heated printer bed (self built)"\r
 msgstr ""\r
 \r
 msgid "Heated printer bed (self built)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:530\r
+#: Cura/gui/configWizard.py:582\r

 msgid "Dual extrusion (experimental)"\r
 msgstr ""\r
 \r
 msgid "Dual extrusion (experimental)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:584\r

 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
 "it is highly recommended to improve reliability."\r
 msgstr ""\r
 \r
 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
 "it is highly recommended to improve reliability."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:585\r

 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
 msgstr ""\r
 \r
 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:555\r
+#: Cura/gui/configWizard.py:607\r

 msgid "Upgrade Ultimaker Firmware"\r
 msgstr ""\r
 \r
 msgid "Upgrade Ultimaker Firmware"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:556\r
+#: Cura/gui/configWizard.py:608\r

 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
 "and ultimately makes your printer work."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
 "and ultimately makes your printer work."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:558\r
+#: Cura/gui/configWizard.py:610\r

 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:560\r
+#: Cura/gui/configWizard.py:612\r

 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
 "You will get the chance to do so now."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
 "You will get the chance to do so now."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:566\r
+#: Cura/gui/configWizard.py:618\r

 msgid "Do not upgrade to this firmware if:"\r
 msgstr ""\r
 \r
 msgid "Do not upgrade to this firmware if:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:619\r

 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr ""\r
 \r
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:568\r
+#: Cura/gui/configWizard.py:620\r

 msgid "* Build your own heated bed"\r
 msgstr ""\r
 \r
 msgid "* Build your own heated bed"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:569\r
+#: Cura/gui/configWizard.py:621\r

 msgid "* Have other changes in the firmware"\r
 msgstr ""\r
 \r
 msgid "* Have other changes in the firmware"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:589\r
+#: Cura/gui/configWizard.py:641\r

 msgid "Ultimaker Checkup"\r
 msgstr ""\r
 \r
 msgid "Ultimaker Checkup"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:603\r
+#: Cura/gui/configWizard.py:655\r

 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
 msgstr ""\r
 \r
 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:604\r
+#: Cura/gui/configWizard.py:656\r

 msgid "Run checks"\r
 msgstr ""\r
 \r
 msgid "Run checks"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:604\r
+#: Cura/gui/configWizard.py:656\r

 msgid "Skip checks"\r
 msgstr ""\r
 \r
 msgid "Skip checks"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:608\r
+#: Cura/gui/configWizard.py:660\r

 msgid "Communication:"\r
 msgstr ""\r
 \r
 msgid "Communication:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:609\r
+#: Cura/gui/configWizard.py:661\r

 msgid "Temperature:"\r
 msgstr ""\r
 \r
 msgid "Temperature:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:662\r

 msgid "Endstops:"\r
 msgstr ""\r
 \r
 msgid "Endstops:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:667\r

 msgid "Show error log"\r
 msgstr ""\r
 \r
 msgid "Show error log"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
-#: Cura/gui/configWizard.py:1297\r
+#: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138\r
+#: Cura/gui/configWizard.py:1357\r

 msgid "Connecting to machine."\r
 msgstr ""\r
 \r
 msgid "Connecting to machine."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:670\r
+#: Cura/gui/configWizard.py:722\r

 msgid "Cooldown before temperature check."\r
 msgstr ""\r
 \r
 msgid "Cooldown before temperature check."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683\r
+#: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735\r

 msgid "Checking the heater and temperature sensor."\r
 msgstr ""\r
 \r
 msgid "Checking the heater and temperature sensor."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:694\r
+#: Cura/gui/configWizard.py:746\r

 msgid "Please make sure none of the endstops are pressed."\r
 msgstr ""\r
 \r
 msgid "Please make sure none of the endstops are pressed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:707\r
+#: Cura/gui/configWizard.py:759\r

 msgid "Temperature measurement FAILED!"\r
 msgstr ""\r
 \r
 msgid "Temperature measurement FAILED!"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:712\r
+#: Cura/gui/configWizard.py:764\r

 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728\r
+#: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780\r

 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
-#: Cura/gui/configWizard.py:1473\r
+#: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315\r
+#: Cura/gui/configWizard.py:1533\r

 msgid "Failed to establish connection with the printer."\r
 msgstr ""\r
 \r
 msgid "Failed to establish connection with the printer."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777\r
+#: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829\r

 msgid "Please press the left X endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the left X endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:772\r
+#: Cura/gui/configWizard.py:824\r

 msgid "Please press the right X endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the right X endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:782\r
+#: Cura/gui/configWizard.py:834\r

 msgid "Please press the front Y endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the front Y endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797\r
+#: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849\r

 msgid "Please press the top Z endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the top Z endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:792\r
+#: Cura/gui/configWizard.py:844\r

 msgid "Please press the back Y endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the back Y endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817\r
+#: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869\r

 msgid "Checkup finished"\r
 msgstr ""\r
 \r
 msgid "Checkup finished"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:811\r
+#: Cura/gui/configWizard.py:863\r

 msgid "Please press the bottom Z endstop."\r
 msgstr ""\r
 \r
 msgid "Please press the bottom Z endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+#: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907\r

 msgid "Ultimaker Calibration"\r
 msgstr ""\r
 \r
 msgid "Ultimaker Calibration"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:860\r
+#: Cura/gui/configWizard.py:912\r

 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 \r
 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:861\r
+#: Cura/gui/configWizard.py:913\r

 msgid "First remove any filament from your machine."\r
 msgstr ""\r
 \r
 msgid "First remove any filament from your machine."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:914\r

 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:863\r
+#: Cura/gui/configWizard.py:915\r

 msgid "We'll push the filament 100mm"\r
 msgstr ""\r
 \r
 msgid "We'll push the filament 100mm"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:864\r
+#: Cura/gui/configWizard.py:916\r

 msgid "Extrude 100mm filament"\r
 msgstr ""\r
 \r
 msgid "Extrude 100mm filament"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:865\r
+#: Cura/gui/configWizard.py:917\r

 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:866\r
+#: Cura/gui/configWizard.py:918\r

 msgid "Save"\r
 msgstr ""\r
 \r
 msgid "Save"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:919\r

 msgid "This results in the following steps per E:"\r
 msgstr ""\r
 \r
 msgid "This results in the following steps per E:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:921\r

 msgid "You can repeat these steps to get better calibration."\r
 msgstr ""\r
 \r
 msgid "You can repeat these steps to get better calibration."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:924\r

 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
 msgstr ""\r
 \r
 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:925\r

 msgid "Heatup for filament removal"\r
 msgstr ""\r
 \r
 msgid "Heatup for filament removal"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932\r
+#: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984\r

 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:972\r
+#: Cura/gui/configWizard.py:1024\r

 msgid "Ultimaker2"\r
 msgstr ""\r
 \r
 msgid "Ultimaker2"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:973\r
+#: Cura/gui/configWizard.py:1025\r

 msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
 msgstr ""\r
 \r
 msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:974\r
+#: Cura/gui/configWizard.py:1026\r

 msgid "Cura is now ready to be used with your Ultimaker2."\r
 msgstr ""\r
 \r
 msgid "Cura is now ready to be used with your Ultimaker2."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:1031\r

 msgid "Lulzbot TAZ/Mini"\r
 msgstr ""\r
 \r
 msgid "Lulzbot TAZ/Mini"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:1032\r

 msgid "Cura is now ready to be used with your Lulzbot."\r
 msgstr ""\r
 \r
 msgid "Cura is now ready to be used with your Lulzbot."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:985\r
+#: Cura/gui/configWizard.py:1037\r

 msgid "Configuration Wizard"\r
 msgstr ""\r
 \r
 msgid "Configuration Wizard"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546\r

 msgid "Bed leveling wizard"\r
 msgstr ""\r
 \r
 msgid "Bed leveling wizard"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1040\r
+#: Cura/gui/configWizard.py:1100\r

 msgid "This wizard will help you in leveling your printer bed"\r
 msgstr ""\r
 \r
 msgid "This wizard will help you in leveling your printer bed"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1042\r
+#: Cura/gui/configWizard.py:1102\r

 msgid "It will do the following steps"\r
 msgstr ""\r
 \r
 msgid "It will do the following steps"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1043\r
+#: Cura/gui/configWizard.py:1103\r

 msgid "* Move the printer head to each corner"\r
 msgstr ""\r
 \r
 msgid "* Move the printer head to each corner"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1044\r
+#: Cura/gui/configWizard.py:1104\r

 msgid "  and let you adjust the height of the bed to the nozzle"\r
 msgstr ""\r
 \r
 msgid "  and let you adjust the height of the bed to the nozzle"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1045\r
+#: Cura/gui/configWizard.py:1105\r

 msgid "* Print a line around the bed to check if it is level"\r
 msgstr ""\r
 \r
 msgid "* Print a line around the bed to check if it is level"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333\r

 msgid "Connect to printer"\r
 msgstr ""\r
 \r
 msgid "Connect to printer"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339\r

 msgid "Resume"\r
 msgstr ""\r
 \r
 msgid "Resume"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1053\r
+#: Cura/gui/configWizard.py:1113\r

 msgid "Up 0.2mm"\r
 msgstr ""\r
 \r
 msgid "Up 0.2mm"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1053\r
+#: Cura/gui/configWizard.py:1113\r

 msgid "Down 0.2mm"\r
 msgstr ""\r
 \r
 msgid "Down 0.2mm"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1054\r
+#: Cura/gui/configWizard.py:1114\r

 msgid "Up 10mm"\r
 msgstr ""\r
 \r
 msgid "Up 10mm"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1054\r
+#: Cura/gui/configWizard.py:1114\r

 msgid "Down 10mm"\r
 msgstr ""\r
 \r
 msgid "Down 10mm"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1114\r
+#: Cura/gui/configWizard.py:1174\r

 msgid "Homing printer..."\r
 msgstr ""\r
 \r
 msgid "Homing printer..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1124\r
+#: Cura/gui/configWizard.py:1184\r

 msgid "Moving head to back center..."\r
 msgstr ""\r
 \r
 msgid "Moving head to back center..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1131\r
+#: Cura/gui/configWizard.py:1191\r

 msgid "Moving head to back left corner..."\r
 msgstr ""\r
 \r
 msgid "Moving head to back left corner..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+#: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213\r

 msgid "Moving head to front right corner..."\r
 msgstr ""\r
 \r
 msgid "Moving head to front right corner..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1206\r

 msgid "Moving head to back right corner..."\r
 msgstr ""\r
 \r
 msgid "Moving head to back right corner..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1160\r
+#: Cura/gui/configWizard.py:1220\r

 msgid "Heating up printer..."\r
 msgstr ""\r
 \r
 msgid "Heating up printer..."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1167\r
+#: Cura/gui/configWizard.py:1227\r

 msgid "Printing a square on the printer bed at 0.3mm height."\r
 msgstr ""\r
 \r
 msgid "Printing a square on the printer bed at 0.3mm height."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1207\r
+#: Cura/gui/configWizard.py:1267\r

 msgid ""\r
 "Adjust the front left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Adjust the front left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1212\r
+#: Cura/gui/configWizard.py:1272\r

 msgid ""\r
 "Adjust the back screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Adjust the back screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1214\r
+#: Cura/gui/configWizard.py:1274\r

 msgid ""\r
 "Adjust the back left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Adjust the back left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1218\r
+#: Cura/gui/configWizard.py:1278\r

 msgid ""\r
 "Adjust the back right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Adjust the back right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1282\r

 msgid ""\r
 "Adjust the front right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Adjust the front right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1226\r
+#: Cura/gui/configWizard.py:1286\r

 #, python-format\r
 msgid "Heating up printer: %d/%d"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Heating up printer: %d/%d"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1228\r
+#: Cura/gui/configWizard.py:1288\r

 msgid ""\r
 "The printer is hot now. Please insert some PLA filament into the printer."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The printer is hot now. Please insert some PLA filament into the printer."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1297\r

 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
 msgstr ""\r
 \r
 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1249\r
+#: Cura/gui/configWizard.py:1309\r

 msgid ""\r
 "Calibration finished.\n"\r
 "The squares on the bed should slightly touch each other."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Calibration finished.\n"\r
 "The squares on the bed should slightly touch each other."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1270\r
+#: Cura/gui/configWizard.py:1330\r

 msgid ""\r
 "This wizard will help you in calibrating the printer head offsets of your "\r
 "dual extrusion machine"\r
 msgstr ""\r
 \r
 msgid ""\r
 "This wizard will help you in calibrating the printer head offsets of your "\r
 "dual extrusion machine"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1303\r
+#: Cura/gui/configWizard.py:1363\r

 msgid "Printing initial calibration cross"\r
 msgstr ""\r
 \r
 msgid "Printing initial calibration cross"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1351\r
+#: Cura/gui/configWizard.py:1411\r

 msgid ""\r
 "Please measure the distance between the horizontal lines in millimeters."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Please measure the distance between the horizontal lines in millimeters."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1361\r
+#: Cura/gui/configWizard.py:1421\r

 msgid "Printing the fine calibration lines."\r
 msgstr ""\r
 \r
 msgid "Printing the fine calibration lines."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1416\r
+#: Cura/gui/configWizard.py:1476\r

 msgid ""\r
 "Which horizontal line number lays perfect on top of each other? Front most "\r
 "line is zero."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Which horizontal line number lays perfect on top of each other? Front most "\r
 "line is zero."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1427\r
+#: Cura/gui/configWizard.py:1487\r

 #, python-format\r
 msgid "Calibration finished. Offsets are: %s %s"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Calibration finished. Offsets are: %s %s"\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1440\r
+#: Cura/gui/configWizard.py:1500\r

 msgid "Please load both extruders with PLA."\r
 msgstr ""\r
 \r
 msgid "Please load both extruders with PLA."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1449\r
+#: Cura/gui/configWizard.py:1509\r

 msgid "Homing printer and heating up both extruders."\r
 msgstr ""\r
 \r
 msgid "Homing printer and heating up both extruders."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1459\r
+#: Cura/gui/configWizard.py:1519\r

 msgid "Please measure the distance between the vertical lines in millimeters."\r
 msgstr ""\r
 \r
 msgid "Please measure the distance between the vertical lines in millimeters."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1466\r
+#: Cura/gui/configWizard.py:1526\r

 msgid ""\r
 "Which vertical line number lays perfect on top of each other? Leftmost line "\r
 "is zero."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Which vertical line number lays perfect on top of each other? Leftmost line "\r
 "is zero."\r
 msgstr ""\r
 \r

-#: Cura/gui/configWizard.py:1515\r
+#: Cura/gui/configWizard.py:1575\r

 msgid "Head offset wizard"\r
 msgstr ""\r
 \r
 msgid "Head offset wizard"\r
 msgstr ""\r
 \r

-#: Cura/gui/expertConfig.py:25\r
+#: Cura/gui/expertConfig.py:27\r

 msgid "Expert config"\r
 msgstr ""\r
 \r
 msgid "Expert config"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:59\r
+#: Cura/gui/firmwareInstall.py:71\r

 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
 msgstr ""\r
 \r
 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
-#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:541\r
+#: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76\r
+#: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572\r

 msgid "Firmware update"\r
 msgstr ""\r
 \r
 msgid "Firmware update"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:76\r

 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
+#: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188\r

 msgid "OK"\r
 msgstr ""\r
 \r
 msgid "OK"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
+#: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272\r

 msgid "Reading firmware..."\r
 msgstr ""\r
 \r
 msgid "Reading firmware..."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
+#: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274\r

 msgid "Connecting to machine..."\r
 msgstr ""\r
 \r
 msgid "Connecting to machine..."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
+#: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278\r

 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:118\r
+#: Cura/gui/firmwareInstall.py:130\r

 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:125\r
+#: Cura/gui/firmwareInstall.py:137\r

 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UMO firmware on an UM2 or UMO+?"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UMO firmware on an UM2 or UMO+?"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:131\r
+#: Cura/gui/firmwareInstall.py:143\r

 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UM2 or UMO+ firmware on an UMO?"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UM2 or UMO+ firmware on an UMO?"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
+#: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300\r

 msgid "Uploading firmware..."\r
 msgstr ""\r
 \r
 msgid "Uploading firmware..."\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
+#: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303\r

 #, python-format\r
 msgid ""\r
 "Done!\n"\r
 "Installed firmware: %s"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid ""\r
 "Done!\n"\r
 "Installed firmware: %s"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
+#: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305\r

 msgid "Failed to write firmware.\n"\r
 msgstr ""\r
 \r
 msgid "Failed to write firmware.\n"\r
 msgstr ""\r
 \r

-#: Cura/gui/firmwareInstall.py:231\r
+#: Cura/gui/firmwareInstall.py:297\r

 msgid "Failed to connect to programmer.\n"\r
 msgstr ""\r
 \r
 msgid "Failed to connect to programmer.\n"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:68\r
+#: Cura/gui/mainWindow.py:72\r

 msgid "Load model file...\tCTRL+L"\r
 msgstr ""\r
 \r
 msgid "Load model file...\tCTRL+L"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:70\r
+#: Cura/gui/mainWindow.py:74\r

 msgid "Save model...\tCTRL+S"\r
 msgstr ""\r
 \r
 msgid "Save model...\tCTRL+S"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:72\r
+#: Cura/gui/mainWindow.py:76\r

 msgid "Reload platform\tF5"\r
 msgstr ""\r
 \r
 msgid "Reload platform\tF5"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:74\r
+#: Cura/gui/mainWindow.py:78\r

 msgid "Clear platform"\r
 msgstr ""\r
 \r
 msgid "Clear platform"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:78\r
+#: Cura/gui/mainWindow.py:82\r

 msgid "Print...\tCTRL+P"\r
 msgstr ""\r
 \r
 msgid "Print...\tCTRL+P"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:80 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312\r

 msgid "Save GCode..."\r
 msgstr ""\r
 \r
 msgid "Save GCode..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:82\r
+#: Cura/gui/mainWindow.py:86\r

 msgid "Show slice engine log..."\r
 msgstr ""\r
 \r
 msgid "Show slice engine log..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:86\r
+#: Cura/gui/mainWindow.py:90\r

 msgid "Open Profile..."\r
 msgstr ""\r
 \r
 msgid "Open Profile..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:89\r
+#: Cura/gui/mainWindow.py:93\r

 msgid "Save Profile..."\r
 msgstr ""\r
 \r
 msgid "Save Profile..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:92\r
+#: Cura/gui/mainWindow.py:100\r

 msgid "Load Profile from GCode..."\r
 msgstr ""\r
 \r
 msgid "Load Profile from GCode..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:104\r

 msgid "Reset Profile to default"\r
 msgstr ""\r
 \r
 msgid "Reset Profile to default"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:101\r
+#: Cura/gui/mainWindow.py:109\r

 msgid "Preferences...\tCTRL+,"\r
 msgstr ""\r
 \r
 msgid "Preferences...\tCTRL+,"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:103 Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480\r

 msgid "Machine settings..."\r
 msgstr ""\r
 \r
 msgid "Machine settings..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:109\r
+#: Cura/gui/mainWindow.py:117\r

 msgid "Recent Model Files"\r
 msgstr ""\r
 \r
 msgid "Recent Model Files"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:116\r
+#: Cura/gui/mainWindow.py:124\r

 msgid "Recent Profile Files"\r
 msgstr ""\r
 \r
 msgid "Recent Profile Files"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:122\r
+#: Cura/gui/mainWindow.py:130\r

 msgid "Quit"\r
 msgstr ""\r
 \r
 msgid "Quit"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:124\r
+#: Cura/gui/mainWindow.py:132\r

 msgid "File"\r
 msgstr ""\r
 \r
 msgid "File"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:132\r
+#: Cura/gui/mainWindow.py:140\r

 msgid "Minecraft map import..."\r
 msgstr ""\r
 \r
 msgid "Minecraft map import..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:144\r

 msgid "PID Debugger..."\r
 msgstr ""\r
 \r
 msgid "PID Debugger..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:138\r
+#: Cura/gui/mainWindow.py:146\r

 msgid "Auto Firmware Update..."\r
 msgstr ""\r
 \r
 msgid "Auto Firmware Update..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:141\r
-msgid "Copy profile to clipboard"\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:145\r
+#: Cura/gui/mainWindow.py:153\r

 msgid "Print all at once"\r
 msgstr ""\r
 \r
 msgid "Print all at once"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:147\r
+#: Cura/gui/mainWindow.py:155\r

 msgid "Print one at a time"\r
 msgstr ""\r
 \r
 msgid "Print one at a time"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:154\r
+#: Cura/gui/mainWindow.py:162\r

 msgid "Tools"\r
 msgstr ""\r
 \r
 msgid "Tools"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:160 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183\r

 msgid "Machine"\r
 msgstr ""\r
 \r
 msgid "Machine"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:171\r

 msgid "Switch to quickprint..."\r
 msgstr ""\r
 \r
 msgid "Switch to quickprint..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:175\r

 msgid "Switch to full settings..."\r
 msgstr ""\r
 \r
 msgid "Switch to full settings..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:180\r

 msgid "Open expert settings...\tCTRL+E"\r
 msgstr ""\r
 \r
 msgid "Open expert settings...\tCTRL+E"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:176\r
-msgid "Run first run wizard..."\r
-msgstr ""\r
-\r
-#: Cura/gui/mainWindow.py:178\r
+#: Cura/gui/mainWindow.py:184\r

 msgid "Run bed leveling wizard..."\r
 msgstr ""\r
 \r
 msgid "Run bed leveling wizard..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:186\r

 msgid "Run head offset wizard..."\r
 msgstr ""\r
 \r
 msgid "Run head offset wizard..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:183\r
+#: Cura/gui/mainWindow.py:189\r

 msgid "Expert"\r
 msgstr ""\r
 \r
 msgid "Expert"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:192\r

 msgid "Online documentation..."\r
 msgstr ""\r
 \r
 msgid "Online documentation..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:194\r

 msgid "Report a problem..."\r
 msgstr ""\r
 \r
 msgid "Report a problem..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:196\r

 msgid "Check for update..."\r
 msgstr ""\r
 \r
 msgid "Check for update..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:198\r

 msgid "Open YouMagine website..."\r
 msgstr ""\r
 \r
 msgid "Open YouMagine website..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:200\r

 msgid "About Cura..."\r
 msgstr ""\r
 \r
 msgid "About Cura..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:202\r

 msgid "Help"\r
 msgstr ""\r
 \r
 msgid "Help"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:376\r
+#: Cura/gui/mainWindow.py:390\r

 msgid ""\r
 "For \"One at a time\" printing, you need to have entered the correct head "\r
 "size and gantry height in the machine settings"\r
 msgstr ""\r
 \r
 msgid ""\r
 "For \"One at a time\" printing, you need to have entered the correct head "\r
 "size and gantry height in the machine settings"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:376\r
+#: Cura/gui/mainWindow.py:390\r

 msgid "One at a time warning"\r
 msgstr ""\r
 \r
 msgid "One at a time warning"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:473\r
+#: Cura/gui/mainWindow.py:478\r
+msgid "Add new machine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:486\r

 msgid "Install default firmware..."\r
 msgstr ""\r
 \r
 msgid "Install default firmware..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:476\r
+#: Cura/gui/mainWindow.py:489\r

 msgid "Install custom firmware..."\r
 msgstr ""\r
 \r
 msgid "Install custom firmware..."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:480\r
+#: Cura/gui/mainWindow.py:493\r

 msgid "Select profile file to load"\r
 msgstr ""\r
 \r
 msgid "Select profile file to load"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:492\r
+#: Cura/gui/mainWindow.py:505\r

 msgid "Select gcode file to load profile from"\r
 msgstr ""\r
 \r
 msgid "Select gcode file to load profile from"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:507\r
+#: Cura/gui/mainWindow.py:520\r

 msgid ""\r
 "No profile found in GCode file.\n"\r
 "This feature only works with GCode files made by Cura 12.07 or newer."\r
 msgstr ""\r
 \r
 msgid ""\r
 "No profile found in GCode file.\n"\r
 "This feature only works with GCode files made by Cura 12.07 or newer."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:507\r
+#: Cura/gui/mainWindow.py:520\r

 msgid "Profile load error"\r
 msgstr ""\r
 \r
 msgid "Profile load error"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:511\r
+#: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534\r

 msgid "Select profile file to save"\r
 msgstr ""\r
 \r
 msgid "Select profile file to save"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:521\r
+#: Cura/gui/mainWindow.py:544\r

 msgid ""\r
 "This will reset all profile settings to defaults.\n"\r
 "Unless you have saved your current profile, all settings will be lost!\n"\r
 "Do you really want to reset?"\r
 msgstr ""\r
 \r
 msgid ""\r
 "This will reset all profile settings to defaults.\n"\r
 "Unless you have saved your current profile, all settings will be lost!\n"\r
 "Do you really want to reset?"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:521\r
+#: Cura/gui/mainWindow.py:544\r

 msgid "Profile reset"\r
 msgstr ""\r
 \r
 msgid "Profile reset"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:541\r
+#: Cura/gui/mainWindow.py:557\r
+msgid ""\r
+"Copy the settings from quickprint to your full settings?\n"\r
+"(This will overwrite any full setting modifications you have)"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:557\r
+msgid "Profile copy"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:572\r

 msgid ""\r
 "Warning: Installing a custom firmware does not guarantee that you machine "\r
 "will function correctly, and could damage your machine."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Warning: Installing a custom firmware does not guarantee that you machine "\r
 "will function correctly, and could damage your machine."\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:542 Cura/gui/mainWindow.py:584\r
+#: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616\r

 msgid "Open firmware to upload"\r
 msgstr ""\r
 \r
 msgid "Open firmware to upload"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:613\r
+#: Cura/gui/mainWindow.py:645\r

 msgid "You are running the latest version of Cura!"\r
 msgstr ""\r
 \r
 msgid "You are running the latest version of Cura!"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:613\r
+#: Cura/gui/mainWindow.py:645\r

 msgid "Awesome!"\r
 msgstr ""\r
 \r
 msgid "Awesome!"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:658\r
+#: Cura/gui/mainWindow.py:690\r

 msgid "Basic"\r
 msgstr ""\r
 \r
 msgid "Basic"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:662\r
+#: Cura/gui/mainWindow.py:694\r

 msgid "Advanced"\r
 msgstr ""\r
 \r
 msgid "Advanced"\r
 msgstr ""\r
 \r

-#: Cura/gui/mainWindow.py:668\r
+#: Cura/gui/mainWindow.py:700\r

 msgid "Plugins"\r
 msgstr ""\r
 \r
 msgid "Plugins"\r
 msgstr ""\r
 \r


@@ -936,72 +946,76 @@ msgstr ""
 msgid "Error: no plugin selected"\r
 msgstr ""\r
 \r
 msgid "Error: no plugin selected"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:14\r
+#: Cura/gui/preferencesDialog.py:15\r

 msgid "Preferences"\r
 msgstr ""\r
 \r
 msgid "Preferences"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:28\r
+#: Cura/gui/preferencesDialog.py:29\r

 msgid "Print window"\r
 msgstr ""\r
 \r
 msgid "Print window"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:31\r
+#: Cura/gui/preferencesDialog.py:32\r

 msgid "Colours"\r
 msgstr ""\r
 \r
 msgid "Colours"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478\r
+#: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506\r

 msgid "Language"\r
 msgstr ""\r
 \r
 msgid "Language"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:40\r
+#: Cura/gui/preferencesDialog.py:41\r

 msgid "Filament settings"\r
 msgstr ""\r
 \r
 msgid "Filament settings"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:50\r
+#: Cura/gui/preferencesDialog.py:58\r

 msgid "Cura settings"\r
 msgstr ""\r
 \r
 msgid "Cura settings"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:80\r
+msgid "Select replication root folder"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113\r

 msgid "Machine settings"\r
 msgstr ""\r
 \r
 msgid "Machine settings"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:95\r
+#: Cura/gui/preferencesDialog.py:124\r

 msgid "Printer head size"\r
 msgstr ""\r
 \r
 msgid "Printer head size"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:103\r
+#: Cura/gui/preferencesDialog.py:132\r

 #, python-format\r
 msgid "Extruder %d"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Extruder %d"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:107\r
+#: Cura/gui/preferencesDialog.py:136\r

 msgid "Communication settings"\r
 msgstr ""\r
 \r
 msgid "Communication settings"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:119\r
+#: Cura/gui/preferencesDialog.py:148\r

 msgid "Ok"\r
 msgstr ""\r
 \r
 msgid "Ok"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:123\r
+#: Cura/gui/preferencesDialog.py:152\r

 msgid "Add new machine"\r
 msgstr ""\r
 \r
 msgid "Add new machine"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:127\r
+#: Cura/gui/preferencesDialog.py:156\r

 msgid "Remove machine"\r
 msgstr ""\r
 \r
 msgid "Remove machine"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196\r

 msgid "Change machine name"\r
 msgstr ""\r
 \r
 msgid "Change machine name"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:154\r
+#: Cura/gui/preferencesDialog.py:182\r

 msgid "Cannot remove the last machine configuration in Cura"\r
 msgstr ""\r
 \r
 msgid "Cannot remove the last machine configuration in Cura"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:154\r
+#: Cura/gui/preferencesDialog.py:182\r

 msgid "Machine remove error"\r
 msgstr ""\r
 \r
 msgid "Machine remove error"\r
 msgstr ""\r
 \r

-#: Cura/gui/preferencesDialog.py:168\r
+#: Cura/gui/preferencesDialog.py:196\r

 msgid "Enter the new name:"\r
 msgstr ""\r
 \r
 msgid "Enter the new name:"\r
 msgstr ""\r
 \r


@@ -1030,7 +1044,7 @@ msgstr ""
 msgid "Connect"\r
 msgstr ""\r
 \r
 msgid "Connect"\r
 msgstr ""\r
 \r

-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66\r

 msgid "Print"\r
 msgstr ""\r
 \r
 msgid "Print"\r
 msgstr ""\r
 \r


@@ -1046,219 +1060,213 @@ msgstr ""
 msgid "Error log"\r
 msgstr ""\r
 \r
 msgid "Error log"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:64\r
+#: Cura/gui/sceneView.py:65\r

 msgid "Load"\r
 msgstr ""\r
 \r
 msgid "Load"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:69\r
+#: Cura/gui/sceneView.py:70\r

 msgid "Rotate"\r
 msgstr ""\r
 \r
 msgid "Rotate"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:70\r
+#: Cura/gui/sceneView.py:71\r

 msgid "Scale"\r
 msgstr ""\r
 \r
 msgid "Scale"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:71\r
+#: Cura/gui/sceneView.py:72\r

 msgid "Mirror"\r
 msgstr ""\r
 \r
 msgid "Mirror"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+#: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77\r

 msgid "Reset"\r
 msgstr ""\r
 \r
 msgid "Reset"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:74\r
+#: Cura/gui/sceneView.py:75\r

 msgid "Lay flat"\r
 msgstr ""\r
 \r
 msgid "Lay flat"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:77\r
+#: Cura/gui/sceneView.py:78\r

 msgid "To max"\r
 msgstr ""\r
 \r
 msgid "To max"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:79\r
+#: Cura/gui/sceneView.py:80\r

 msgid "Mirror X"\r
 msgstr ""\r
 \r
 msgid "Mirror X"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:80\r
+#: Cura/gui/sceneView.py:81\r

 msgid "Mirror Y"\r
 msgstr ""\r
 \r
 msgid "Mirror Y"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:81\r
+#: Cura/gui/sceneView.py:82\r

 msgid "Mirror Z"\r
 msgstr ""\r
 \r
 msgid "Mirror Z"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:89\r
+#: Cura/gui/sceneView.py:90\r

 msgid "Scale X"\r
 msgstr ""\r
 \r
 msgid "Scale X"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:91\r
+#: Cura/gui/sceneView.py:92\r

 msgid "Scale Y"\r
 msgstr ""\r
 \r
 msgid "Scale Y"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:93\r
+#: Cura/gui/sceneView.py:94\r

 msgid "Scale Z"\r
 msgstr ""\r
 \r
 msgid "Scale Z"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:95\r
+#: Cura/gui/sceneView.py:96\r

 msgid "Size X (mm)"\r
 msgstr ""\r
 \r
 msgid "Size X (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:97\r
+#: Cura/gui/sceneView.py:98\r

 msgid "Size Y (mm)"\r
 msgstr ""\r
 \r
 msgid "Size Y (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:99\r
+#: Cura/gui/sceneView.py:100\r

 msgid "Size Z (mm)"\r
 msgstr ""\r
 \r
 msgid "Size Z (mm)"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:101\r
+#: Cura/gui/sceneView.py:102\r

 msgid "Uniform scale"\r
 msgstr ""\r
 \r
 msgid "Uniform scale"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "View mode"\r
 msgstr ""\r
 \r
 msgid "View mode"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "Normal"\r
 msgstr ""\r
 \r
 msgid "Normal"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "Overhang"\r
 msgstr ""\r
 \r
 msgid "Overhang"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "Transparent"\r
 msgstr ""\r
 \r
 msgid "Transparent"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "X-Ray"\r
 msgstr ""\r
 \r
 msgid "X-Ray"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:104\r
+#: Cura/gui/sceneView.py:105\r

 msgid "Layers"\r
 msgstr ""\r
 \r
 msgid "Layers"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:106\r
+#: Cura/gui/sceneView.py:107\r

 msgid "Share on YouMagine"\r
 msgstr ""\r
 \r
 msgid "Share on YouMagine"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:204\r
+#: Cura/gui/sceneView.py:224\r

 msgid "Open 3D model"\r
 msgstr ""\r
 \r
 msgid "Open 3D model"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:229\r
+#: Cura/gui/sceneView.py:249\r

 msgid "Save 3D model"\r
 msgstr ""\r
 \r
 msgid "Save 3D model"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994\r

 #, python-format\r
 msgid "Print with %s"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Print with %s"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:280\r
+#: Cura/gui/sceneView.py:313\r

 msgid "Slice engine log..."\r
 msgstr ""\r
 \r
 msgid "Slice engine log..."\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+#: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997\r

 msgid "Save toolpath"\r
 msgstr ""\r
 \r
 msgid "Save toolpath"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r

 msgid "The slicing engine reported the following"\r
 msgstr ""\r
 \r
 msgid "The slicing engine reported the following"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:352\r
+#: Cura/gui/sceneView.py:387\r

 msgid "Engine log..."\r
 msgstr ""\r
 \r
 msgid "Engine log..."\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r

 msgid "How many copies do you want?"\r
 msgstr ""\r
 \r
 msgid "How many copies do you want?"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r

 msgid "Number of copies"\r
 msgstr ""\r
 \r
 msgid "Number of copies"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:491\r
+#: Cura/gui/sceneView.py:526\r

 msgid "Multiply"\r
 msgstr ""\r
 \r
 msgid "Multiply"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:549\r
+msgid ""\r
+"Cannot fit all the requested duplicates. Do you want to try and reset object "\r
+"positions?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:549\r
+msgid "Reset Positions"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:856\r

 msgid "Center on platform"\r
 msgstr ""\r
 \r
 msgid "Center on platform"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:857\r

 msgid "Delete object"\r
 msgstr ""\r
 \r
 msgid "Delete object"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:858\r

 msgid "Multiply object"\r
 msgstr ""\r
 \r
 msgid "Multiply object"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:784\r
+#: Cura/gui/sceneView.py:859\r

 msgid "Split object into parts"\r
 msgstr ""\r
 \r
 msgid "Split object into parts"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:786\r
+#: Cura/gui/sceneView.py:862\r

 msgid "Dual extrusion merge"\r
 msgstr ""\r
 \r
 msgid "Dual extrusion merge"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:864\r

 msgid "Delete all objects"\r
 msgstr ""\r
 \r
 msgid "Delete all objects"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:789\r
+#: Cura/gui/sceneView.py:865\r

 msgid "Reload all objects"\r
 msgstr ""\r
 \r
 msgid "Reload all objects"\r
 msgstr ""\r
 \r

-#: Cura/gui/sceneView.py:912\r
-msgid "Toolpath to SD"\r
-msgstr ""\r
-\r
-#: Cura/gui/sceneView.py:1206\r
-msgid "Overhang view not working due to lack of OpenGL shaders support."\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:19\r
-msgid "High quality print"\r
+#: Cura/gui/sceneView.py:866\r
+msgid "Reset all objects positions"\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:20\r
-msgid "Normal quality print"\r
+#: Cura/gui/sceneView.py:867\r
+msgid "Reset all objects transformations"\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:21\r
-msgid "Fast low quality print"\r
+#: Cura/gui/sceneView.py:991\r
+msgid "Toolpath to SD"\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:22\r
-msgid "Thin walled cup or vase"\r
+#: Cura/gui/sceneView.py:1285\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:32\r
+#: Cura/gui/simpleMode.py:52\r

 msgid "Print support structure"\r
 msgstr ""\r
 \r
 msgid "Print support structure"\r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:37\r
+#: Cura/gui/simpleMode.py:57\r

 msgid "Select a quickprint profile:"\r
 msgstr ""\r
 \r
 msgid "Select a quickprint profile:"\r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:47\r
+#: Cura/gui/simpleMode.py:65\r

 msgid "Material:"\r
 msgstr ""\r
 \r
 msgid "Material:"\r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:51\r
-msgid "Diameter:"\r
-msgstr ""\r
-\r
-#: Cura/gui/simpleMode.py:57\r
+#: Cura/gui/simpleMode.py:73\r

 msgid "Other:"\r
 msgstr ""\r
 \r
 msgid "Other:"\r
 msgstr ""\r
 \r

-#: Cura/gui/simpleMode.py:85\r
-msgid "Exterior Only"\r
-msgstr ""\r
-\r

 #: Cura/gui/tools/imageToMesh.py:28\r
 msgid "Height (mm)"\r
 msgstr ""\r
 #: Cura/gui/tools/imageToMesh.py:28\r
 msgid "Height (mm)"\r
 msgstr ""\r


@@ -1449,7 +1457,11 @@ msgstr ""
 msgid "Webcam error"\r
 msgstr ""\r
 \r
 msgid "Webcam error"\r
 msgstr ""\r
 \r

-#: Cura/gui/util/engineResultView.py:168\r
+#: Cura/gui/util/engineResultView.py:29\r
+msgid "Single Layer"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:186\r

 #, python-format\r
 msgid "Loading toolpath for visualization (%d%%)"\r
 msgstr ""\r
 #, python-format\r
 msgid "Loading toolpath for visualization (%d%%)"\r
 msgstr ""\r


@@ -1462,17 +1474,17 @@ msgstr ""
 msgid "3D window error"\r
 msgstr ""\r
 \r
 msgid "3D window error"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172\r
-#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212\r
+#: Cura/util/profile.py:214\r

 msgid "Quality"\r
 msgstr ""\r
 \r
 msgid "Quality"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:170\r
+#: Cura/util/profile.py:178\r

 msgid "Layer height (mm)"\r
 msgstr ""\r
 \r
 msgid "Layer height (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:170\r
+#: Cura/util/profile.py:178\r

 msgid ""\r
 "Layer height in millimeters.\n"\r
 "This is the most important setting to determine the quality of your print. "\r
 msgid ""\r
 "Layer height in millimeters.\n"\r
 "This is the most important setting to determine the quality of your print. "\r


@@ -1480,36 +1492,42 @@ msgid ""
 "0.25mm with an Ultimaker for very fast prints at low quality."\r
 msgstr ""\r
 \r
 "0.25mm with an Ultimaker for very fast prints at low quality."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:171\r
+#: Cura/util/profile.py:179\r

 msgid "Shell thickness (mm)"\r
 msgstr ""\r
 \r
 msgid "Shell thickness (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:171\r
+#: Cura/util/profile.py:179\r

 msgid ""\r
 "Thickness of the outside shell in the horizontal direction.\n"\r
 "This is used in combination with the nozzle size to define the number\n"\r
 "of perimeter lines and the thickness of those perimeter lines."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Thickness of the outside shell in the horizontal direction.\n"\r
 "This is used in combination with the nozzle size to define the number\n"\r
 "of perimeter lines and the thickness of those perimeter lines."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:172\r
+#: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Retraction"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:180\r

 msgid "Enable retraction"\r
 msgstr ""\r
 \r
 msgid "Enable retraction"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:172\r
+#: Cura/util/profile.py:180\r

 msgid ""\r
 "Retract the filament when the nozzle is moving over a none-printed area. "\r
 "Details about the retraction can be configured in the advanced tab."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Retract the filament when the nozzle is moving over a none-printed area. "\r
 "Details about the retraction can be configured in the advanced tab."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:173 Cura/util/profile.py:174\r
+#: Cura/util/profile.py:181 Cura/util/profile.py:182\r

 msgid "Fill"\r
 msgstr ""\r
 \r
 msgid "Fill"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:173\r
+#: Cura/util/profile.py:181\r

 msgid "Bottom/Top thickness (mm)"\r
 msgstr ""\r
 \r
 msgid "Bottom/Top thickness (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:173\r
+#: Cura/util/profile.py:181\r

 msgid ""\r
 "This controls the thickness of the bottom and top layers, the amount of "\r
 "solid layers put down is calculated by the layer thickness and this value.\n"\r
 msgid ""\r
 "This controls the thickness of the bottom and top layers, the amount of "\r
 "solid layers put down is calculated by the layer thickness and this value.\n"\r


@@ -1517,11 +1535,16 @@ msgid ""
 "near your wall thickness to make an evenly strong part."\r
 msgstr ""\r
 \r
 "near your wall thickness to make an evenly strong part."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:174\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233\r
+#: Cura/util/profile.py:234\r
+msgid "Infill"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182\r

 msgid "Fill Density (%)"\r
 msgstr ""\r
 \r
 msgid "Fill Density (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:174\r
+#: Cura/util/profile.py:182\r

 msgid ""\r
 "This controls how densely filled the insides of your print will be. For a "\r
 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
 msgid ""\r
 "This controls how densely filled the insides of your print will be. For a "\r
 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r


@@ -1530,23 +1553,24 @@ msgid ""
 "part becomes."\r
 msgstr ""\r
 \r
 "part becomes."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:175\r
+#: Cura/util/profile.py:183\r

 msgid ""\r
 "The nozzle size is very important, this is used to calculate the line width "\r
 "of the infill, and used to calculate the amount of outside wall lines and "\r
 "thickness for the wall thickness you entered in the print settings."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The nozzle size is very important, this is used to calculate the line width "\r
 "of the infill, and used to calculate the amount of outside wall lines and "\r
 "thickness for the wall thickness you entered in the print settings."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178\r
-#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181\r
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
+#: Cura/util/profile.py:190\r

 msgid "Speed and Temperature"\r
 msgstr ""\r
 \r
 msgid "Speed and Temperature"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:176\r
+#: Cura/util/profile.py:184\r

 msgid "Print speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Print speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:176\r
+#: Cura/util/profile.py:184\r

 msgid ""\r
 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
 "s, but for good quality prints you want to print slower. Printing speed "\r
 msgid ""\r
 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
 "s, but for good quality prints you want to print slower. Printing speed "\r


@@ -1554,62 +1578,66 @@ msgid ""
 "settings for this."\r
 msgstr ""\r
 \r
 "settings for this."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:177\r
+#: Cura/util/profile.py:185\r

 msgid "Printing temperature (C)"\r
 msgstr ""\r
 \r
 msgid "Printing temperature (C)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179\r
-#: Cura/util/profile.py:180\r
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189\r

 msgid ""\r
 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
 "For PLA a value of 210C is usually used.\n"\r
 "For ABS a value of 230C or higher is required."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
 "For PLA a value of 210C is usually used.\n"\r
 "For ABS a value of 230C or higher is required."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:178\r
+#: Cura/util/profile.py:186\r

 msgid "2nd nozzle temperature (C)"\r
 msgstr ""\r
 \r
 msgid "2nd nozzle temperature (C)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:179\r
+#: Cura/util/profile.py:187\r

 msgid "3th nozzle temperature (C)"\r
 msgstr ""\r
 \r
 msgid "3th nozzle temperature (C)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:180\r
+#: Cura/util/profile.py:188\r

 msgid "4th nozzle temperature (C)"\r
 msgstr ""\r
 \r
 msgid "4th nozzle temperature (C)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:181\r
+#: Cura/util/profile.py:189\r
+msgid "5th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r

 msgid "Bed temperature (C)"\r
 msgstr ""\r
 \r
 msgid "Bed temperature (C)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:181\r
+#: Cura/util/profile.py:190\r

 msgid ""\r
 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182 Cura/util/profile.py:183\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r

 msgid "None"\r
 msgstr ""\r
 \r
 msgid "None"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:191\r

 msgid "Touching buildplate"\r
 msgstr ""\r
 \r
 msgid "Touching buildplate"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:191\r

 msgid "Everywhere"\r
 msgstr ""\r
 \r
 msgid "Everywhere"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184\r
-#: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226\r
-#: Cura/util/profile.py:227 Cura/util/profile.py:228\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239\r

 msgid "Support"\r
 msgstr ""\r
 \r
 msgid "Support"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:191\r

 msgid "Support type"\r
 msgstr ""\r
 \r
 msgid "Support type"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:191\r

 msgid ""\r
 "Type of support structure build.\n"\r
 "\"Touching buildplate\" is the most commonly used support setting.\n"\r
 msgid ""\r
 "Type of support structure build.\n"\r
 "\"Touching buildplate\" is the most commonly used support setting.\n"\r


@@ -1620,21 +1648,27 @@ msgid ""
 "Everywhere creates support even on top of parts of the model."\r
 msgstr ""\r
 \r
 "Everywhere creates support even on top of parts of the model."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:183 Cura/util/profile.py:232\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:243\r

 msgid "Brim"\r
 msgstr ""\r
 \r
 msgid "Brim"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
-#: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r

 msgid "Raft"\r
 msgstr ""\r
 \r
 msgid "Raft"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:183\r
+#: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225\r
+#: Cura/util/profile.py:226\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r

 msgid "Platform adhesion type"\r
 msgstr ""\r
 \r
 msgid "Platform adhesion type"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:183\r
+#: Cura/util/profile.py:192\r

 msgid ""\r
 "Different options that help in preventing corners from lifting due to "\r
 "warping.\n"\r
 msgid ""\r
 "Different options that help in preventing corners from lifting due to "\r
 "warping.\n"\r


@@ -1645,23 +1679,23 @@ msgid ""
 "(Note that enabling the brim or raft disables the skirt)"\r
 msgstr ""\r
 \r
 "(Note that enabling the brim or raft disables the skirt)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:193\r

 msgid "Both"\r
 msgstr ""\r
 \r
 msgid "Both"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:193\r

 msgid "First extruder"\r
 msgstr ""\r
 \r
 msgid "First extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:193\r

 msgid "Second extruder"\r
 msgstr ""\r
 \r
 msgid "Second extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:193\r

 msgid "Support dual extrusion"\r
 msgstr ""\r
 \r
 msgid "Support dual extrusion"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:193\r

 msgid ""\r
 "Which extruder to use for support material, for break-away support you can "\r
 "use both extruders.\n"\r
 msgid ""\r
 "Which extruder to use for support material, for break-away support you can "\r
 "use both extruders.\n"\r


@@ -1671,15 +1705,15 @@ msgid ""
 "You can also use the 2nd extruder for soluble support materials."\r
 msgstr ""\r
 \r
 "You can also use the 2nd extruder for soluble support materials."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196\r

 msgid "Dual extrusion"\r
 msgstr ""\r
 \r
 msgid "Dual extrusion"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:185\r
+#: Cura/util/profile.py:194\r

 msgid "Wipe&prime tower"\r
 msgstr ""\r
 \r
 msgid "Wipe&prime tower"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:185\r
+#: Cura/util/profile.py:194\r

 msgid ""\r
 "The wipe-tower is a tower printed on every layer when switching between "\r
 "nozzles.\n"\r
 msgid ""\r
 "The wipe-tower is a tower printed on every layer when switching between "\r
 "nozzles.\n"\r


@@ -1687,11 +1721,11 @@ msgid ""
 "print the 2nd color."\r
 msgstr ""\r
 \r
 "print the 2nd color."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:186\r
+#: Cura/util/profile.py:195\r

 msgid "Wipe&prime tower volume per layer (mm3)"\r
 msgstr ""\r
 \r
 msgid "Wipe&prime tower volume per layer (mm3)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:186\r
+#: Cura/util/profile.py:195\r

 msgid ""\r
 "The amount of material put in the wipe/prime tower.\n"\r
 "This is done in volume because in general you want to extrude a\n"\r
 msgid ""\r
 "The amount of material put in the wipe/prime tower.\n"\r
 "This is done in volume because in general you want to extrude a\n"\r


@@ -1700,135 +1734,152 @@ msgid ""
 "This means that with thinner layers, your tower gets bigger."\r
 msgstr ""\r
 \r
 "This means that with thinner layers, your tower gets bigger."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:187\r
+#: Cura/util/profile.py:196\r

 msgid "Ooze shield"\r
 msgstr ""\r
 \r
 msgid "Ooze shield"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:187\r
+#: Cura/util/profile.py:196\r

 msgid ""\r
 "The ooze shield is a 1 line thick shell around the object which stands a few "\r
 "mm from the object.\n"\r
 "This shield catches any oozing from the unused nozzle in dual-extrusion."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The ooze shield is a 1 line thick shell around the object which stands a few "\r
 "mm from the object.\n"\r
 "This shield catches any oozing from the unused nozzle in dual-extrusion."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
+#: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r

 msgid "Filament"\r
 msgstr ""\r
 \r
 msgid "Filament"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:197\r

 msgid "Diameter (mm)"\r
 msgstr ""\r
 \r
 msgid "Diameter (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:197\r

 msgid ""\r
 "Diameter of your filament, as accurately as possible.\n"\r
 "If you cannot measure this value you will have to calibrate it, a higher "\r
 "number means less extrusion, a smaller number generates more extrusion."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Diameter of your filament, as accurately as possible.\n"\r
 "If you cannot measure this value you will have to calibrate it, a higher "\r
 "number means less extrusion, a smaller number generates more extrusion."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:198\r

 msgid "Diameter2 (mm)"\r
 msgstr ""\r
 \r
 msgid "Diameter2 (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:198\r

 msgid ""\r
 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:199\r

 msgid "Diameter3 (mm)"\r
 msgstr ""\r
 \r
 msgid "Diameter3 (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:199\r

 msgid ""\r
 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:200\r

 msgid "Diameter4 (mm)"\r
 msgstr ""\r
 \r
 msgid "Diameter4 (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:200\r

 msgid ""\r
 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:201\r
+msgid "Diameter5 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:201\r
+msgid ""\r
+"Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:202\r

 msgid "Flow (%)"\r
 msgstr ""\r
 \r
 msgid "Flow (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:202\r

 msgid ""\r
 "Flow compensation, the amount of material extruded is multiplied by this "\r
 "value"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Flow compensation, the amount of material extruded is multiplied by this "\r
 "value"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199\r
-msgid "Retraction"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:203\r

 msgid "Speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:203\r

 msgid ""\r
 "Speed at which the filament is retracted, a higher retraction speed works "\r
 "better. But a very high retraction speed can lead to filament grinding."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Speed at which the filament is retracted, a higher retraction speed works "\r
 "better. But a very high retraction speed can lead to filament grinding."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:204\r

 msgid "Distance (mm)"\r
 msgstr ""\r
 \r
 msgid "Distance (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:204\r

 msgid ""\r
 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
 "seems to generate good results."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
 "seems to generate good results."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:205\r

 msgid "Dual extrusion switch amount (mm)"\r
 msgstr ""\r
 \r
 msgid "Dual extrusion switch amount (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:205\r

 msgid ""\r
 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
 "no retraction at all. A value of 16.0mm seems to generate good results."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
 "no retraction at all. A value of 16.0mm seems to generate good results."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:206\r

 msgid "Minimum travel (mm)"\r
 msgstr ""\r
 \r
 msgid "Minimum travel (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:206\r

 msgid ""\r
 "Minimum amount of travel needed for a retraction to happen at all. To make "\r
 "sure you do not get a lot of retractions in a small area."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Minimum amount of travel needed for a retraction to happen at all. To make "\r
 "sure you do not get a lot of retractions in a small area."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:207\r
+msgid "Off"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "All"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "No Skin"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r

 msgid "Enable combing"\r
 msgstr ""\r
 \r
 msgid "Enable combing"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:207\r

 msgid ""\r
 "Combing is the act of avoiding holes in the print for the head to travel "\r
 msgid ""\r
 "Combing is the act of avoiding holes in the print for the head to travel "\r

-"over. If combing is disabled the printer head moves straight from the start "\r
-"point to the end point and it will always retract."\r
+"over. If combing is 'Off' the printer head moves straight from the start "\r
+"point to the end point and it will always retract.  If 'All', enable combing "\r
+"on all surfaces.  If 'No Skin', enable combing on all except skin surfaces."\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:208\r

 msgid "Minimal extrusion before retracting (mm)"\r
 msgstr ""\r
 \r
 msgid "Minimal extrusion before retracting (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:208\r

 msgid ""\r
 "The minimal amount of extrusion that needs to be done before retracting "\r
 "again if a retraction needs to happen before this minimal is reached the "\r
 msgid ""\r
 "The minimal amount of extrusion that needs to be done before retracting "\r
 "again if a retraction needs to happen before this minimal is reached the "\r


@@ -1837,100 +1888,111 @@ msgid ""
 "the filament and causes grinding issues."\r
 msgstr ""\r
 \r
 "the filament and causes grinding issues."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:209\r

 msgid "Z hop when retracting (mm)"\r
 msgstr ""\r
 \r
 msgid "Z hop when retracting (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:209\r

 msgid ""\r
 "When a retraction is done, the head is lifted by this amount to travel over "\r
 "the print. A value of 0.075 works well. This feature has a lot of positive "\r
 "effect on delta towers."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When a retraction is done, the head is lifted by this amount to travel over "\r
 "the print. A value of 0.075 works well. This feature has a lot of positive "\r
 "effect on delta towers."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:210\r

 msgid "Initial layer thickness (mm)"\r
 msgstr ""\r
 \r
 msgid "Initial layer thickness (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:210\r

 msgid ""\r
 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
 "the other layers."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
 "the other layers."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:211\r

 msgid "Initial layer line width (%)"\r
 msgstr ""\r
 \r
 msgid "Initial layer line width (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:211\r

 msgid ""\r
 "Extra width factor for the extrusion on the first layer, on some printers "\r
 "it's good to have wider extrusion on the first layer to get better bed "\r
 "adhesion."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Extra width factor for the extrusion on the first layer, on some printers "\r
 "it's good to have wider extrusion on the first layer to get better bed "\r
 "adhesion."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:212\r

 msgid "Cut off object bottom (mm)"\r
 msgstr ""\r
 \r
 msgid "Cut off object bottom (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:212\r

 msgid ""\r
 "Sinks the object into the platform, this can be used for objects that do not "\r
 "have a flat bottom and thus create a too small first layer."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Sinks the object into the platform, this can be used for objects that do not "\r
 "have a flat bottom and thus create a too small first layer."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:214\r

 msgid "Dual extrusion overlap (mm)"\r
 msgstr ""\r
 \r
 msgid "Dual extrusion overlap (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:214\r

 msgid ""\r
 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
 "bonds the different colors together."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
 "bonds the different colors together."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220\r

 msgid "Speed"\r
 msgstr ""\r
 \r
 msgid "Speed"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:215\r

 msgid "Travel speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Travel speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:215\r

 msgid ""\r
 "Speed at which travel moves are done, a well built Ultimaker can reach "\r
 "speeds of 250mm/s. But some machines might miss steps then."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Speed at which travel moves are done, a well built Ultimaker can reach "\r
 "speeds of 250mm/s. But some machines might miss steps then."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:216\r

 msgid "Bottom layer speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Bottom layer speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:216\r

 msgid ""\r
 "Print speed for the bottom layer, you want to print the first layer slower "\r
 "so it sticks better to the printer bed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Print speed for the bottom layer, you want to print the first layer slower "\r
 "so it sticks better to the printer bed."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:217\r

 msgid "Infill speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Infill speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:217\r

 msgid ""\r
 "Speed at which infill parts are printed. If set to 0 then the print speed is "\r
 "used for the infill. Printing the infill faster can greatly reduce printing "\r
 "time, but this can negatively affect print quality."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Speed at which infill parts are printed. If set to 0 then the print speed is "\r
 "used for the infill. Printing the infill faster can greatly reduce printing "\r
 "time, but this can negatively affect print quality."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:218\r
+msgid "Top/bottom speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"Speed at which top/bottom parts are printed. If set to 0 then the print "\r
+"speed is used for the infill. Printing the top/bottom faster can greatly "\r
+"reduce printing time, but this can negatively affect print quality."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:219\r

 msgid "Outer shell speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Outer shell speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:219\r

 msgid ""\r
 "Speed at which outer shell is printed. If set to 0 then the print speed is "\r
 "used. Printing the outer shell at a lower speed improves the final skin "\r
 msgid ""\r
 "Speed at which outer shell is printed. If set to 0 then the print speed is "\r
 "used. Printing the outer shell at a lower speed improves the final skin "\r


@@ -1938,11 +2000,11 @@ msgid ""
 "and the outer shell speed will effect quality in a negative way."\r
 msgstr ""\r
 \r
 "and the outer shell speed will effect quality in a negative way."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:220\r

 msgid "Inner shell speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Inner shell speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:220\r

 msgid ""\r
 "Speed at which inner shells are printed. If set to 0 then the print speed is "\r
 "used. Printing the inner shell faster then the outer shell will reduce "\r
 msgid ""\r
 "Speed at which inner shells are printed. If set to 0 then the print speed is "\r
 "used. Printing the inner shell faster then the outer shell will reduce "\r


@@ -1950,17 +2012,17 @@ msgid ""
 "speed and the infill/printing speed."\r
 msgstr ""\r
 \r
 "speed and the infill/printing speed."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216\r
-#: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219\r
-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230\r
+#: Cura/util/profile.py:231\r

 msgid "Cool"\r
 msgstr ""\r
 \r
 msgid "Cool"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:221\r

 msgid "Minimal layer time (sec)"\r
 msgstr ""\r
 \r
 msgid "Minimal layer time (sec)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:221\r

 msgid ""\r
 "Minimum time spent in a layer, gives the layer time to cool down before the "\r
 "next layer is put on top. If the layer will be placed down too fast the "\r
 msgid ""\r
 "Minimum time spent in a layer, gives the layer time to cool down before the "\r
 "next layer is put on top. If the layer will be placed down too fast the "\r


@@ -1968,21 +2030,21 @@ msgid ""
 "seconds printing this layer."\r
 msgstr ""\r
 \r
 "seconds printing this layer."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:211\r
+#: Cura/util/profile.py:222\r

 msgid "Enable cooling fan"\r
 msgstr ""\r
 \r
 msgid "Enable cooling fan"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:211\r
+#: Cura/util/profile.py:222\r

 msgid ""\r
 "Enable the cooling fan during the print. The extra cooling from the cooling "\r
 "fan is essential during faster prints."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Enable the cooling fan during the print. The extra cooling from the cooling "\r
 "fan is essential during faster prints."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:224\r

 msgid "Line count"\r
 msgstr ""\r
 \r
 msgid "Line count"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:224\r

 msgid ""\r
 "The skirt is a line drawn around the object at the first layer. This helps "\r
 "to prime your extruder, and to see if the object fits on your platform.\n"\r
 msgid ""\r
 "The skirt is a line drawn around the object at the first layer. This helps "\r
 "to prime your extruder, and to see if the object fits on your platform.\n"\r


@@ -1990,54 +2052,54 @@ msgid ""
 "priming your extruder better for small objects."\r
 msgstr ""\r
 \r
 "priming your extruder better for small objects."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:225\r

 msgid "Start distance (mm)"\r
 msgstr ""\r
 \r
 msgid "Start distance (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:225\r

 msgid ""\r
 "The distance between the skirt and the first layer.\n"\r
 "This is the minimal distance, multiple skirt lines will be put outwards from "\r
 "this distance."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The distance between the skirt and the first layer.\n"\r
 "This is the minimal distance, multiple skirt lines will be put outwards from "\r
 "this distance."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:226\r

 msgid "Minimal length (mm)"\r
 msgstr ""\r
 \r
 msgid "Minimal length (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:226\r

 msgid ""\r
 "The minimal length of the skirt, if this minimal length is not reached it "\r
 "will add more skirt lines to reach this minimal lenght.\n"\r
 "Note: If the line count is set to 0 this is ignored."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The minimal length of the skirt, if this minimal length is not reached it "\r
 "will add more skirt lines to reach this minimal lenght.\n"\r
 "Note: If the line count is set to 0 this is ignored."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:227\r

 msgid "Fan full on at height (mm)"\r
 msgstr ""\r
 \r
 msgid "Fan full on at height (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:227\r

 msgid ""\r
 "The height at which the fan is turned on completely. For the layers below "\r
 "this the fan speed is scaled linearly with the fan off at layer 0."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The height at which the fan is turned on completely. For the layers below "\r
 "this the fan speed is scaled linearly with the fan off at layer 0."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:228\r

 msgid "Fan speed min (%)"\r
 msgstr ""\r
 \r
 msgid "Fan speed min (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:228\r

 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
 "Minimal fan speed is used if the layer is not slowed down due to cooling."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
 "Minimal fan speed is used if the layer is not slowed down due to cooling."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:229\r

 msgid "Fan speed max (%)"\r
 msgstr ""\r
 \r
 msgid "Fan speed max (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:229\r

 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r


@@ -2045,67 +2107,63 @@ msgid ""
 "than 200%."\r
 msgstr ""\r
 \r
 "than 200%."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:230\r

 msgid "Minimum speed (mm/s)"\r
 msgstr ""\r
 \r
 msgid "Minimum speed (mm/s)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:230\r

 msgid ""\r
 "The minimal layer time can cause the print to slow down so much it starts to "\r
 "ooze. The minimal feedrate protects against this. Even if a print gets "\r
 "slowed down it will never be slower than this minimal speed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The minimal layer time can cause the print to slow down so much it starts to "\r
 "ooze. The minimal feedrate protects against this. Even if a print gets "\r
 "slowed down it will never be slower than this minimal speed."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:231\r

 msgid "Cool head lift"\r
 msgstr ""\r
 \r
 msgid "Cool head lift"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:231\r

 msgid ""\r
 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
 "the extra time so the minimal layer time is always hit."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
 "the extra time so the minimal layer time is always hit."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
-msgid "Infill"\r
-msgstr ""\r
-\r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:232\r

 msgid "Solid infill top"\r
 msgstr ""\r
 \r
 msgid "Solid infill top"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:232\r

 msgid ""\r
 "Create a solid top surface, if set to false the top is filled with the fill "\r
 "percentage. Useful for cups/vases."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Create a solid top surface, if set to false the top is filled with the fill "\r
 "percentage. Useful for cups/vases."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:233\r

 msgid "Solid infill bottom"\r
 msgstr ""\r
 \r
 msgid "Solid infill bottom"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:233\r

 msgid ""\r
 "Create a solid bottom surface, if set to false the bottom is filled with the "\r
 "fill percentage. Useful for buildings."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Create a solid bottom surface, if set to false the bottom is filled with the "\r
 "fill percentage. Useful for buildings."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:234\r

 msgid "Infill overlap (%)"\r
 msgstr ""\r
 \r
 msgid "Infill overlap (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:234\r

 msgid ""\r
 "Amount of overlap between the infill and the walls. There is a slight "\r
 "overlap with the walls and the infill so the walls connect firmly to the "\r
 "infill."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Amount of overlap between the infill and the walls. There is a slight "\r
 "overlap with the walls and the infill so the walls connect firmly to the "\r
 "infill."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:235\r

 msgid "Structure type"\r
 msgstr ""\r
 \r
 msgid "Structure type"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:235\r

 msgid ""\r
 "The type of support structure.\n"\r
 "Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
 msgid ""\r
 "The type of support structure.\n"\r
 "Grid is very strong and can come off in 1 piece, however, sometimes it is "\r


@@ -2115,54 +2173,58 @@ msgid ""
 "prints."\r
 msgstr ""\r
 \r
 "prints."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:236\r

 msgid "Overhang angle for support (deg)"\r
 msgstr ""\r
 \r
 msgid "Overhang angle for support (deg)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:236\r

 msgid ""\r
 msgid ""\r

-"The minimal angle that overhangs need to have to get support. With 0 degree "\r
-"being horizontal and 90 degree being vertical."\r
+"The minimal angle that overhangs need to have to get support. With 90 degree "\r
+"being horizontal and 0 degree being vertical."\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:237\r

 msgid "Fill amount (%)"\r
 msgstr ""\r
 \r
 msgid "Fill amount (%)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:237\r

 #, python-format\r
 msgid ""\r
 "Amount of infill structure in the support material, less material gives "\r
 "weaker support which is easier to remove. 15% seems to be a good average."\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid ""\r
 "Amount of infill structure in the support material, less material gives "\r
 "weaker support which is easier to remove. 15% seems to be a good average."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:238\r

 msgid "Distance X/Y (mm)"\r
 msgstr ""\r
 \r
 msgid "Distance X/Y (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:238\r

 msgid ""\r
 "Distance of the support material from the print, in the X/Y directions.\n"\r
 "0.7mm gives a nice distance from the print so the support does not stick to "\r
 "the print."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Distance of the support material from the print, in the X/Y directions.\n"\r
 "0.7mm gives a nice distance from the print so the support does not stick to "\r
 "the print."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:239\r

 msgid "Distance Z (mm)"\r
 msgstr ""\r
 \r
 msgid "Distance Z (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:239\r

 msgid ""\r
 "Distance from the top/bottom of the support to the print. A small gap here "\r
 "makes it easier to remove the support but makes the print a bit uglier.\n"\r
 "0.15mm gives a good seperation of the support material."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Distance from the top/bottom of the support to the print. A small gap here "\r
 "makes it easier to remove the support but makes the print a bit uglier.\n"\r
 "0.15mm gives a good seperation of the support material."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:240 Cura/util/profile.py:241\r
+msgid "Black Magic"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:240\r

 msgid "Spiralize the outer contour"\r
 msgstr ""\r
 \r
 msgid "Spiralize the outer contour"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:240\r

 msgid ""\r
 "Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
 "steady Z increase over the whole print. This feature turns a solid object "\r
 msgid ""\r
 "Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
 "steady Z increase over the whole print. This feature turns a solid object "\r


@@ -2170,117 +2232,142 @@ msgid ""
 "This feature used to be called Joris in older versions."\r
 msgstr ""\r
 \r
 "This feature used to be called Joris in older versions."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:241\r

 msgid "Only follow mesh surface"\r
 msgstr ""\r
 \r
 msgid "Only follow mesh surface"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:241\r

 msgid ""\r
 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
 "infill, no top/bottom, nothing."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
 "infill, no top/bottom, nothing."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:243\r

 msgid "Brim line amount"\r
 msgstr ""\r
 \r
 msgid "Brim line amount"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:243\r

 msgid ""\r
 "The amount of lines used for a brim, more lines means a larger brim which "\r
 "sticks better, but this also makes your effective print area smaller."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The amount of lines used for a brim, more lines means a larger brim which "\r
 "sticks better, but this also makes your effective print area smaller."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:244\r

 msgid "Extra margin (mm)"\r
 msgstr ""\r
 \r
 msgid "Extra margin (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:244\r

 msgid ""\r
 "If the raft is enabled, this is the extra raft area around the object which "\r
 "is also rafted. Increasing this margin will create a stronger raft while "\r
 "using more material and leaving less area for your print."\r
 msgstr ""\r
 \r
 msgid ""\r
 "If the raft is enabled, this is the extra raft area around the object which "\r
 "is also rafted. Increasing this margin will create a stronger raft while "\r
 "using more material and leaving less area for your print."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:245\r

 msgid "Line spacing (mm)"\r
 msgstr ""\r
 \r
 msgid "Line spacing (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:245\r

 msgid ""\r
 "When you are using the raft this is the distance between the centerlines of "\r
 "the raft line."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When you are using the raft this is the distance between the centerlines of "\r
 "the raft line."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:246\r

 msgid "Base thickness (mm)"\r
 msgstr ""\r
 \r
 msgid "Base thickness (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:246\r

 msgid ""\r
 "When you are using the raft this is the thickness of the base layer which is "\r
 "put down."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When you are using the raft this is the thickness of the base layer which is "\r
 "put down."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:247\r

 msgid "Base line width (mm)"\r
 msgstr ""\r
 \r
 msgid "Base line width (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:247\r

 msgid ""\r
 "When you are using the raft this is the width of the base layer lines which "\r
 "are put down."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When you are using the raft this is the width of the base layer lines which "\r
 "are put down."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:248\r

 msgid "Interface thickness (mm)"\r
 msgstr ""\r
 \r
 msgid "Interface thickness (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:248\r

 msgid ""\r
 "When you are using the raft this is the thickness of the interface layer "\r
 "which is put down."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When you are using the raft this is the thickness of the interface layer "\r
 "which is put down."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:249\r

 msgid "Interface line width (mm)"\r
 msgstr ""\r
 \r
 msgid "Interface line width (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:249\r

 msgid ""\r
 "When you are using the raft this is the width of the interface layer lines "\r
 "which are put down."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When you are using the raft this is the width of the interface layer lines "\r
 "which are put down."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:239\r
+#: Cura/util/profile.py:250\r

 msgid "Airgap"\r
 msgstr ""\r
 \r
 msgid "Airgap"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:239\r
+#: Cura/util/profile.py:250\r
+msgid "Gap between the last layer of the raft the whole print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:251\r
+msgid "First Layer Airgap"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:251\r

 msgid ""\r
 "Gap between the last layer of the raft and the first printing layer. A small "\r
 msgid ""\r
 "Gap between the last layer of the raft and the first printing layer. A small "\r

-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove."\r
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
+"value is added on top of the 'Airgap' setting."\r

 msgstr ""\r
 \r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:252\r

 msgid "Surface layers"\r
 msgstr ""\r
 \r
 msgid "Surface layers"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:252\r

 msgid ""\r
 "Amount of surface layers put on top of the raft, these are fully filled "\r
 "layers on which the model is printed."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Amount of surface layers put on top of the raft, these are fully filled "\r
 "layers on which the model is printed."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:253\r
+msgid "Surface layer thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:253\r
+msgid "Thickness of each surface layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Surface layer line width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:254\r
+msgid "Width of the lines for each surface layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257\r
+#: Cura/util/profile.py:258\r

 msgid "Fix horrible"\r
 msgstr ""\r
 \r
 msgid "Fix horrible"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:255\r

 msgid "Combine everything (Type-A)"\r
 msgstr ""\r
 \r
 msgid "Combine everything (Type-A)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:241 Cura/util/profile.py:242\r
+#: Cura/util/profile.py:255 Cura/util/profile.py:256\r

 msgid ""\r
 "This expert option adds all parts of the model together. The result is "\r
 "usually that internal cavities disappear. Depending on the model this can be "\r
 msgid ""\r
 "This expert option adds all parts of the model together. The result is "\r
 "usually that internal cavities disappear. Depending on the model this can be "\r


@@ -2289,15 +2376,15 @@ msgid ""
 "Type-B ignores all internal holes and only keeps the outside shape per layer."\r
 msgstr ""\r
 \r
 "Type-B ignores all internal holes and only keeps the outside shape per layer."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:256\r

 msgid "Combine everything (Type-B)"\r
 msgstr ""\r
 \r
 msgid "Combine everything (Type-B)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:257\r

 msgid "Keep open faces"\r
 msgstr ""\r
 \r
 msgid "Keep open faces"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:257\r

 msgid ""\r
 "This expert option keeps all the open bits of the model intact. Normally "\r
 "Cura tries to stitch up small holes and remove everything with big holes, "\r
 msgid ""\r
 "This expert option keeps all the open bits of the model intact. Normally "\r
 "Cura tries to stitch up small holes and remove everything with big holes, "\r


@@ -2308,11 +2395,11 @@ msgid ""
 "risk."\r
 msgstr ""\r
 \r
 "risk."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:258\r

 msgid "Extensive stitching"\r
 msgstr ""\r
 \r
 msgid "Extensive stitching"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:258\r

 msgid ""\r
 "Extensive stitching tries to fix up open holes in the model by closing the "\r
 "hole with touching polygons. This algorthm is quite expensive and could "\r
 msgid ""\r
 "Extensive stitching tries to fix up open holes in the model by closing the "\r
 "hole with touching polygons. This algorthm is quite expensive and could "\r


@@ -2321,159 +2408,171 @@ msgid ""
 "risk."\r
 msgstr ""\r
 \r
 "risk."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:470\r
+#: Cura/util/profile.py:486\r

 msgid "Save profile on slice"\r
 msgstr ""\r
 \r
 msgid "Save profile on slice"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:470\r
+#: Cura/util/profile.py:486\r

 msgid ""\r
 "When slicing save the profile as [stl_file]_profile.ini next to the model."\r
 msgstr ""\r
 \r
 msgid ""\r
 "When slicing save the profile as [stl_file]_profile.ini next to the model."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:471\r
+#: Cura/util/profile.py:487\r

 msgid "Cost (price/kg)"\r
 msgstr ""\r
 \r
 msgid "Cost (price/kg)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:471\r
+#: Cura/util/profile.py:487\r

 msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
 msgstr ""\r
 \r
 msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:472\r
+#: Cura/util/profile.py:488\r

 msgid "Cost (price/m)"\r
 msgstr ""\r
 \r
 msgid "Cost (price/m)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:472\r
+#: Cura/util/profile.py:488\r

 msgid ""\r
 "Cost of your filament per meter, to estimate the cost of the final print."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Cost of your filament per meter, to estimate the cost of the final print."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:473\r
+#: Cura/util/profile.py:489\r

 msgid "Auto detect SD card drive"\r
 msgstr ""\r
 \r
 msgid "Auto detect SD card drive"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:473\r
+#: Cura/util/profile.py:489\r

 msgid ""\r
 "Auto detect the SD card. You can disable this because on some systems "\r
 "external hard-drives or USB sticks are detected as SD card."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Auto detect the SD card. You can disable this because on some systems "\r
 "external hard-drives or USB sticks are detected as SD card."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:474\r
+#: Cura/util/profile.py:501\r
+msgid "Base folder to replicate on SD card"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid ""\r
+"The specified folder will be used as a base path. Any gcode generated from "\r
+"object coming from within that folder will be automatically saved on the SD "\r
+"card at the same sub-folder. Any object coming from outside of this path "\r
+"will save the gcode on the root folder of the card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:502\r

 msgid "Check for updates"\r
 msgstr ""\r
 \r
 msgid "Check for updates"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:474\r
+#: Cura/util/profile.py:502\r

 msgid "Check for newer versions of Cura on startup"\r
 msgstr ""\r
 \r
 msgid "Check for newer versions of Cura on startup"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:475\r
+#: Cura/util/profile.py:503\r

 msgid "Send usage statistics"\r
 msgstr ""\r
 \r
 msgid "Send usage statistics"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:475\r
+#: Cura/util/profile.py:503\r

 msgid "Submit anonymous usage information to improve future versions of Cura"\r
 msgstr ""\r
 \r
 msgid "Submit anonymous usage information to improve future versions of Cura"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:477\r
+#: Cura/util/profile.py:505\r

 msgid "Density (kg/m3)"\r
 msgstr ""\r
 \r
 msgid "Density (kg/m3)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:477\r
+#: Cura/util/profile.py:505\r

 msgid ""\r
 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
 "This value is used to estimate the weight if the filament used for the print."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
 "This value is used to estimate the weight if the filament used for the print."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:478\r
+#: Cura/util/profile.py:506\r

 msgid ""\r
 "Change the language in which Cura runs. Switching language requires a "\r
 "restart of Cura"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Change the language in which Cura runs. Switching language requires a "\r
 "restart of Cura"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:509\r

 msgid "Model colour"\r
 msgstr ""\r
 \r
 msgid "Model colour"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:509\r

 msgid "Display color for first extruder"\r
 msgstr ""\r
 \r
 msgid "Display color for first extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:510\r

 msgid "Model colour (2)"\r
 msgstr ""\r
 \r
 msgid "Model colour (2)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:510\r

 msgid "Display color for second extruder"\r
 msgstr ""\r
 \r
 msgid "Display color for second extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:511\r

 msgid "Model colour (3)"\r
 msgstr ""\r
 \r
 msgid "Model colour (3)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:511\r

 msgid "Display color for third extruder"\r
 msgstr ""\r
 \r
 msgid "Display color for third extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:512\r

 msgid "Model colour (4)"\r
 msgstr ""\r
 \r
 msgid "Model colour (4)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:512\r

 msgid "Display color for forth extruder"\r
 msgstr ""\r
 \r
 msgid "Display color for forth extruder"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:513\r

 msgid "Printing window type"\r
 msgstr ""\r
 \r
 msgid "Printing window type"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:513\r

 msgid "Select the interface used for USB printing."\r
 msgstr ""\r
 \r
 msgid "Select the interface used for USB printing."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:497\r
+#: Cura/util/profile.py:525\r

 msgid "Maximum width (mm)"\r
 msgstr ""\r
 \r
 msgid "Maximum width (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499\r
+#: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527\r

 msgid "Size of the machine in mm"\r
 msgstr ""\r
 \r
 msgid "Size of the machine in mm"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:498\r
+#: Cura/util/profile.py:526\r

 msgid "Maximum depth (mm)"\r
 msgstr ""\r
 \r
 msgid "Maximum depth (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:499\r
+#: Cura/util/profile.py:527\r

 msgid "Maximum height (mm)"\r
 msgstr ""\r
 \r
 msgid "Maximum height (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:500\r
+#: Cura/util/profile.py:528\r

 msgid "Machine center 0,0"\r
 msgstr ""\r
 \r
 msgid "Machine center 0,0"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:500\r
+#: Cura/util/profile.py:528\r

 msgid ""\r
 "Machines firmware defines the center of the bed as 0,0 instead of the front "\r
 "left corner."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Machines firmware defines the center of the bed as 0,0 instead of the front "\r
 "left corner."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:501\r
+#: Cura/util/profile.py:529\r

 msgid "Build area shape"\r
 msgstr ""\r
 \r
 msgid "Build area shape"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:501\r
+#: Cura/util/profile.py:529\r

 msgid "The shape of machine build area."\r
 msgstr ""\r
 \r
 msgid "The shape of machine build area."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:503\r
+#: Cura/util/profile.py:531\r

 msgid ""\r
 "If you have an heated bed, this enabled heated bed settings (requires "\r
 "restart)"\r
 msgstr ""\r
 \r
 msgid ""\r
 "If you have an heated bed, this enabled heated bed settings (requires "\r
 "restart)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:504\r
+#: Cura/util/profile.py:532\r

 msgid "GCode Flavor"\r
 msgstr ""\r
 \r
 msgid "GCode Flavor"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:504\r
+#: Cura/util/profile.py:532\r

 msgid ""\r
 "Flavor of generated GCode.\n"\r
 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
 msgid ""\r
 "Flavor of generated GCode.\n"\r
 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r


@@ -2485,175 +2584,178 @@ msgid ""
 "Mach3 uses A,B,C instead of E for extruders."\r
 msgstr ""\r
 \r
 "Mach3 uses A,B,C instead of E for extruders."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:505\r
+#: Cura/util/profile.py:533\r

 msgid "Extruder count"\r
 msgstr ""\r
 \r
 msgid "Extruder count"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:505\r
+#: Cura/util/profile.py:533\r

 msgid "Amount of extruders in your machine."\r
 msgstr ""\r
 \r
 msgid "Amount of extruders in your machine."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538\r
+#: Cura/util/profile.py:540\r

 msgid "Offset X"\r
 msgstr ""\r
 \r
 msgid "Offset X"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:506 Cura/util/profile.py:507\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535\r

 msgid "The offset of your secondary extruder compared to the primary."\r
 msgstr ""\r
 \r
 msgid "The offset of your secondary extruder compared to the primary."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511\r
+#: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539\r
+#: Cura/util/profile.py:541\r

 msgid "Offset Y"\r
 msgstr ""\r
 \r
 msgid "Offset Y"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:508 Cura/util/profile.py:509\r
+#: Cura/util/profile.py:536 Cura/util/profile.py:537\r

 msgid "The offset of your tertiary extruder compared to the primary."\r
 msgstr ""\r
 \r
 msgid "The offset of your tertiary extruder compared to the primary."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:510 Cura/util/profile.py:511\r
+#: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540\r
+#: Cura/util/profile.py:541\r

 msgid "The offset of your forth extruder compared to the primary."\r
 msgstr ""\r
 \r
 msgid "The offset of your forth extruder compared to the primary."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:542\r

 msgid "E-Steps per 1mm filament"\r
 msgstr ""\r
 \r
 msgid "E-Steps per 1mm filament"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:542\r

 msgid ""\r
 "Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
 "ignored and the value in your firmware is used."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
 "ignored and the value in your firmware is used."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:513\r
+#: Cura/util/profile.py:543\r

 msgid "Serial port"\r
 msgstr ""\r
 \r
 msgid "Serial port"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:513\r
+#: Cura/util/profile.py:543\r

 msgid "Serial port to use for communication with the printer"\r
 msgstr ""\r
 \r
 msgid "Serial port to use for communication with the printer"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:545\r

 msgid "Baudrate"\r
 msgstr ""\r
 \r
 msgid "Baudrate"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:545\r

 msgid ""\r
 "Speed of the serial port communication\n"\r
 "Needs to match your firmware settings\n"\r
 "Common values are 250000, 115200, 57600"\r
 msgstr ""\r
 \r
 msgid ""\r
 "Speed of the serial port communication\n"\r
 "Needs to match your firmware settings\n"\r
 "Common values are 250000, 115200, 57600"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:518\r
+#: Cura/util/profile.py:548\r

 msgid "Head size towards X min (mm)"\r
 msgstr ""\r
 \r
 msgid "Head size towards X min (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:518\r
+#: Cura/util/profile.py:548\r

 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:519\r
+#: Cura/util/profile.py:549\r

 msgid "Head size towards Y min (mm)"\r
 msgstr ""\r
 \r
 msgid "Head size towards Y min (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:549 Cura/util/profile.py:550\r

 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:520\r
+#: Cura/util/profile.py:550\r

 msgid "Head size towards X max (mm)"\r
 msgstr ""\r
 \r
 msgid "Head size towards X max (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:521\r
+#: Cura/util/profile.py:551\r

 msgid "Head size towards Y max (mm)"\r
 msgstr ""\r
 \r
 msgid "Head size towards Y max (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:521\r
+#: Cura/util/profile.py:551\r

 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:522\r
+#: Cura/util/profile.py:552\r

 msgid "Printer gantry height (mm)"\r
 msgstr ""\r
 \r
 msgid "Printer gantry height (mm)"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:522\r
+#: Cura/util/profile.py:552\r

 msgid ""\r
 "The height of the gantry holding up the printer head. If an object is higher "\r
 "then this then you cannot print multiple objects one for one. 60mm for an "\r
 "Ultimaker."\r
 msgstr ""\r
 \r
 msgid ""\r
 "The height of the gantry holding up the printer head. If an object is higher "\r
 "then this then you cannot print multiple objects one for one. 60mm for an "\r
 "Ultimaker."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:554\r

 #, python-format\r
 msgid "More flow than 150% is rare and usually not recommended."\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "More flow than 150% is rare and usually not recommended."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:525\r
+#: Cura/util/profile.py:555\r

 #, python-format\r
 msgid "Less flow than 50% is rare and usually not recommended."\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "Less flow than 50% is rare and usually not recommended."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:556\r

 #, python-format\r
 msgid ""\r
 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
 "are not recommended."\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid ""\r
 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
 "are not recommended."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:528\r
+#: Cura/util/profile.py:558\r

 msgid ""\r
 "It is highly unlikely that your machine can achieve a printing speed above "\r
 "150mm/s"\r
 msgstr ""\r
 \r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a printing speed above "\r
 "150mm/s"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567\r
+#: Cura/util/profile.py:568 Cura/util/profile.py:569\r

 msgid "Temperatures above 260C could damage your machine, be careful!"\r
 msgstr ""\r
 \r
 msgid "Temperatures above 260C could damage your machine, be careful!"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572\r
+#: Cura/util/profile.py:573 Cura/util/profile.py:574\r

 msgid ""\r
 "Are you sure your filament is that thick? Normal filament is around 3mm or "\r
 "1.75mm."\r
 msgstr ""\r
 \r
 msgid ""\r
 "Are you sure your filament is that thick? Normal filament is around 3mm or "\r
 "1.75mm."\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:538\r
+#: Cura/util/profile.py:575\r

 msgid ""\r
 "It is highly unlikely that your machine can achieve a travel speed above "\r
 "300mm/s"\r
 msgstr ""\r
 \r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a travel speed above "\r
 "300mm/s"\r
 msgstr ""\r
 \r

-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:576\r

 #, python-format\r
 msgid ""\r
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
 "results and is not recommended."\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid ""\r
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
 "results and is not recommended."\r
 msgstr ""\r
 \r

-#: Cura/util/sliceEngine.py:92\r
+#: Cura/util/sliceEngine.py:93\r

 #, python-format\r
 msgid "%d minutes"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "%d minutes"\r
 msgstr ""\r
 \r

-#: Cura/util/sliceEngine.py:94\r
+#: Cura/util/sliceEngine.py:95\r

 #, python-format\r
 msgid "%d hour %d minutes"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "%d hour %d minutes"\r
 msgstr ""\r
 \r

-#: Cura/util/sliceEngine.py:95\r
+#: Cura/util/sliceEngine.py:96\r

 #, python-format\r
 msgid "%d hours %d minutes"\r
 msgstr ""\r
 \r
 #, python-format\r
 msgid "%d hours %d minutes"\r
 msgstr ""\r
 \r

-#: Cura/util/sliceEngine.py:100\r
+#: Cura/util/sliceEngine.py:101\r

 #, python-format\r
 msgid "%0.2f meter %0.0f gram"\r
 msgstr ""\r
 #, python-format\r
 msgid "%0.2f meter %0.0f gram"\r
 msgstr ""\r