# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR David Braam # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2015-02-04 14:38+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642 msgid "A new version of Cura is available, would you like to download?" msgstr "" #: Cura/gui/app.py:144 Cura/gui/mainWindow.py:642 msgid "New version available" msgstr "" #: Cura/gui/configWizard.py:231 msgid "Add new machine wizard" msgstr "" #: Cura/gui/configWizard.py:233 msgid "First time run wizard" msgstr "" #: Cura/gui/configWizard.py:234 msgid "Welcome, and thanks for trying Cura!" msgstr "" #: Cura/gui/configWizard.py:236 msgid "This wizard will help you in setting up Cura for your machine." msgstr "" #: Cura/gui/configWizard.py:239 msgid "Select your language:" msgstr "" #: Cura/gui/configWizard.py:266 msgid "Older models" msgstr "" #: Cura/gui/configWizard.py:283 msgid "Printrbot Selection" msgstr "" #: Cura/gui/configWizard.py:285 msgid "Select which Printrbot machine you have:" msgstr "" #: Cura/gui/configWizard.py:349 msgid "Other machine information" msgstr "" #: Cura/gui/configWizard.py:350 msgid "The following pre-defined machine profiles are available" msgstr "" #: Cura/gui/configWizard.py:351 msgid "" "Note that these profiles are not guaranteed to give good results,\n" "or work at all. Extra tweaks might be required.\n" "If you find issues with the predefined profiles,\n" "or want an extra profile.\n" "Please report it at the github issue tracker." msgstr "" #: Cura/gui/configWizard.py:362 msgid "Custom..." msgstr "" #: Cura/gui/configWizard.py:380 msgid "Cura Ready!" msgstr "" #: Cura/gui/configWizard.py:381 msgid "Cura is now ready to be used!" msgstr "" #: Cura/gui/configWizard.py:385 msgid "Custom RepRap information" msgstr "" #: Cura/gui/configWizard.py:386 msgid "" "RepRap machines can be vastly different, so here you can set your own " "settings." msgstr "" #: Cura/gui/configWizard.py:387 msgid "" "Be sure to review the default profile before running it on your machine." msgstr "" #: Cura/gui/configWizard.py:388 msgid "" "If you like a default profile for your machine added,\n" "then make an issue on github." msgstr "" #: Cura/gui/configWizard.py:390 msgid "You will have to manually install Marlin or Sprinter firmware." msgstr "" #: Cura/gui/configWizard.py:392 msgid "Machine name" msgstr "" #: Cura/gui/configWizard.py:393 msgid "Machine width (mm)" msgstr "" #: Cura/gui/configWizard.py:394 msgid "Machine depth (mm)" msgstr "" #: Cura/gui/configWizard.py:395 msgid "Machine height (mm)" msgstr "" #: Cura/gui/configWizard.py:396 Cura/util/profile.py:183 msgid "Nozzle size (mm)" msgstr "" #: Cura/gui/configWizard.py:397 Cura/util/profile.py:531 msgid "Heated bed" msgstr "" #: Cura/gui/configWizard.py:398 msgid "Bed center is 0,0,0 (RoStock)" msgstr "" #: Cura/gui/configWizard.py:418 msgid "Select your machine" msgstr "" #: Cura/gui/configWizard.py:419 msgid "What kind of machine do you have:" msgstr "" #: Cura/gui/configWizard.py:438 msgid "Other (Ex: RepRap, MakerBot, Witbox)" msgstr "" #: Cura/gui/configWizard.py:441 msgid "" "The collection of anonymous usage information helps with the continued " "improvement of Cura." msgstr "" #: Cura/gui/configWizard.py:442 msgid "" "This does NOT submit your models online nor gathers any privacy related " "information." msgstr "" #: Cura/gui/configWizard.py:443 msgid "Submit anonymous usage information:" msgstr "" #: Cura/gui/configWizard.py:444 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats" msgstr "" #: Cura/gui/configWizard.py:576 msgid "Select upgraded parts you have" msgstr "" #: Cura/gui/configWizard.py:577 msgid "" "To assist you in having better default settings for your Ultimaker\n" "Cura would like to know which upgrades you have in your machine." msgstr "" #: Cura/gui/configWizard.py:579 msgid "Extruder drive upgrade" msgstr "" #: Cura/gui/configWizard.py:580 msgid "Heated printer bed (kit)" msgstr "" #: Cura/gui/configWizard.py:581 msgid "Heated printer bed (self built)" msgstr "" #: Cura/gui/configWizard.py:582 msgid "Dual extrusion (experimental)" msgstr "" #: Cura/gui/configWizard.py:584 msgid "" "If you have an Ultimaker bought after october 2012 you will have the\n" "Extruder drive upgrade. If you do not have this upgrade,\n" "it is highly recommended to improve reliability." msgstr "" #: Cura/gui/configWizard.py:585 msgid "" "This upgrade can be bought from the Ultimaker webshop\n" "or found on thingiverse as thing:26094" msgstr "" #: Cura/gui/configWizard.py:607 msgid "Upgrade Ultimaker Firmware" msgstr "" #: Cura/gui/configWizard.py:608 msgid "" "Firmware is the piece of software running directly on your 3D printer.\n" "This firmware controls the step motors, regulates the temperature\n" "and ultimately makes your printer work." msgstr "" #: Cura/gui/configWizard.py:610 msgid "" "The firmware shipping with new Ultimakers works, but upgrades\n" "have been made to make better prints, and make calibration easier." msgstr "" #: Cura/gui/configWizard.py:612 msgid "" "Cura requires these new features and thus\n" "your firmware will most likely need to be upgraded.\n" "You will get the chance to do so now." msgstr "" #: Cura/gui/configWizard.py:618 msgid "Do not upgrade to this firmware if:" msgstr "" #: Cura/gui/configWizard.py:619 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)" msgstr "" #: Cura/gui/configWizard.py:620 msgid "* Build your own heated bed" msgstr "" #: Cura/gui/configWizard.py:621 msgid "* Have other changes in the firmware" msgstr "" #: Cura/gui/configWizard.py:641 msgid "Ultimaker Checkup" msgstr "" #: Cura/gui/configWizard.py:655 msgid "" "It is a good idea to do a few sanity checks now on your Ultimaker.\n" "You can skip these if you know your machine is functional." msgstr "" #: Cura/gui/configWizard.py:656 msgid "Run checks" msgstr "" #: Cura/gui/configWizard.py:656 msgid "Skip checks" msgstr "" #: Cura/gui/configWizard.py:660 msgid "Communication:" msgstr "" #: Cura/gui/configWizard.py:661 msgid "Temperature:" msgstr "" #: Cura/gui/configWizard.py:662 msgid "Endstops:" msgstr "" #: Cura/gui/configWizard.py:667 msgid "Show error log" msgstr "" #: Cura/gui/configWizard.py:701 Cura/gui/configWizard.py:1138 #: Cura/gui/configWizard.py:1357 msgid "Connecting to machine." msgstr "" #: Cura/gui/configWizard.py:722 msgid "Cooldown before temperature check." msgstr "" #: Cura/gui/configWizard.py:728 Cura/gui/configWizard.py:735 msgid "Checking the heater and temperature sensor." msgstr "" #: Cura/gui/configWizard.py:746 msgid "Please make sure none of the endstops are pressed." msgstr "" #: Cura/gui/configWizard.py:759 msgid "Temperature measurement FAILED!" msgstr "" #: Cura/gui/configWizard.py:764 #, python-format msgid "Head temperature: %d" msgstr "" #: Cura/gui/configWizard.py:771 Cura/gui/configWizard.py:780 #, python-format msgid "Communication State: %s" msgstr "" #: Cura/gui/configWizard.py:774 Cura/gui/configWizard.py:1315 #: Cura/gui/configWizard.py:1533 msgid "Failed to establish connection with the printer." msgstr "" #: Cura/gui/configWizard.py:820 Cura/gui/configWizard.py:829 msgid "Please press the left X endstop." msgstr "" #: Cura/gui/configWizard.py:824 msgid "Please press the right X endstop." msgstr "" #: Cura/gui/configWizard.py:834 msgid "Please press the front Y endstop." msgstr "" #: Cura/gui/configWizard.py:840 Cura/gui/configWizard.py:849 msgid "Please press the top Z endstop." msgstr "" #: Cura/gui/configWizard.py:844 msgid "Please press the back Y endstop." msgstr "" #: Cura/gui/configWizard.py:856 Cura/gui/configWizard.py:869 msgid "Checkup finished" msgstr "" #: Cura/gui/configWizard.py:863 msgid "Please press the bottom Z endstop." msgstr "" #: Cura/gui/configWizard.py:884 Cura/gui/configWizard.py:907 msgid "Ultimaker Calibration" msgstr "" #: Cura/gui/configWizard.py:912 msgid "Calibrating the Steps Per E requires some manual actions." msgstr "" #: Cura/gui/configWizard.py:913 msgid "First remove any filament from your machine." msgstr "" #: Cura/gui/configWizard.py:914 msgid "" "Next put in your filament so the tip is aligned with the\n" "top of the extruder drive." msgstr "" #: Cura/gui/configWizard.py:915 msgid "We'll push the filament 100mm" msgstr "" #: Cura/gui/configWizard.py:916 msgid "Extrude 100mm filament" msgstr "" #: Cura/gui/configWizard.py:917 msgid "" "Now measure the amount of extruded filament:\n" "(this can be more or less then 100mm)" msgstr "" #: Cura/gui/configWizard.py:918 msgid "Save" msgstr "" #: Cura/gui/configWizard.py:919 msgid "This results in the following steps per E:" msgstr "" #: Cura/gui/configWizard.py:921 msgid "You can repeat these steps to get better calibration." msgstr "" #: Cura/gui/configWizard.py:924 msgid "" "If you still have filament in your printer which needs\n" "heat to remove, press the heat up button below:" msgstr "" #: Cura/gui/configWizard.py:925 msgid "Heatup for filament removal" msgstr "" #: Cura/gui/configWizard.py:950 Cura/gui/configWizard.py:984 msgid "" "Error: Failed to open serial port to machine\n" "If this keeps happening, try disconnecting and reconnecting the USB cable" msgstr "" #: Cura/gui/configWizard.py:1024 msgid "Ultimaker2" msgstr "" #: Cura/gui/configWizard.py:1025 msgid "Congratulations on your the purchase of your brand new Ultimaker2." msgstr "" #: Cura/gui/configWizard.py:1026 msgid "Cura is now ready to be used with your Ultimaker2." msgstr "" #: Cura/gui/configWizard.py:1031 msgid "Lulzbot TAZ/Mini" msgstr "" #: Cura/gui/configWizard.py:1032 msgid "Cura is now ready to be used with your Lulzbot." msgstr "" #: Cura/gui/configWizard.py:1037 msgid "Configuration Wizard" msgstr "" #: Cura/gui/configWizard.py:1098 Cura/gui/configWizard.py:1546 msgid "Bed leveling wizard" msgstr "" #: Cura/gui/configWizard.py:1100 msgid "This wizard will help you in leveling your printer bed" msgstr "" #: Cura/gui/configWizard.py:1102 msgid "It will do the following steps" msgstr "" #: Cura/gui/configWizard.py:1103 msgid "* Move the printer head to each corner" msgstr "" #: Cura/gui/configWizard.py:1104 msgid " and let you adjust the height of the bed to the nozzle" msgstr "" #: Cura/gui/configWizard.py:1105 msgid "* Print a line around the bed to check if it is level" msgstr "" #: Cura/gui/configWizard.py:1108 Cura/gui/configWizard.py:1333 msgid "Connect to printer" msgstr "" #: Cura/gui/configWizard.py:1112 Cura/gui/configWizard.py:1339 msgid "Resume" msgstr "" #: Cura/gui/configWizard.py:1113 msgid "Up 0.2mm" msgstr "" #: Cura/gui/configWizard.py:1113 msgid "Down 0.2mm" msgstr "" #: Cura/gui/configWizard.py:1114 msgid "Up 10mm" msgstr "" #: Cura/gui/configWizard.py:1114 msgid "Down 10mm" msgstr "" #: Cura/gui/configWizard.py:1174 msgid "Homing printer..." msgstr "" #: Cura/gui/configWizard.py:1184 msgid "Moving head to back center..." msgstr "" #: Cura/gui/configWizard.py:1191 msgid "Moving head to back left corner..." msgstr "" #: Cura/gui/configWizard.py:1199 Cura/gui/configWizard.py:1213 msgid "Moving head to front right corner..." msgstr "" #: Cura/gui/configWizard.py:1206 msgid "Moving head to back right corner..." msgstr "" #: Cura/gui/configWizard.py:1220 msgid "Heating up printer..." msgstr "" #: Cura/gui/configWizard.py:1227 msgid "Printing a square on the printer bed at 0.3mm height." msgstr "" #: Cura/gui/configWizard.py:1267 msgid "" "Adjust the front left screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1272 msgid "" "Adjust the back screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1274 msgid "" "Adjust the back left screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1278 msgid "" "Adjust the back right screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1282 msgid "" "Adjust the front right screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1286 #, python-format msgid "Heating up printer: %d/%d" msgstr "" #: Cura/gui/configWizard.py:1288 msgid "" "The printer is hot now. Please insert some PLA filament into the printer." msgstr "" #: Cura/gui/configWizard.py:1297 msgid "Use the up/down buttons to move the bed and adjust your Z endstop." msgstr "" #: Cura/gui/configWizard.py:1309 msgid "" "Calibration finished.\n" "The squares on the bed should slightly touch each other." msgstr "" #: Cura/gui/configWizard.py:1330 msgid "" "This wizard will help you in calibrating the printer head offsets of your " "dual extrusion machine" msgstr "" #: Cura/gui/configWizard.py:1363 msgid "Printing initial calibration cross" msgstr "" #: Cura/gui/configWizard.py:1411 msgid "" "Please measure the distance between the horizontal lines in millimeters." msgstr "" #: Cura/gui/configWizard.py:1421 msgid "Printing the fine calibration lines." msgstr "" #: Cura/gui/configWizard.py:1476 msgid "" "Which horizontal line number lays perfect on top of each other? Front most " "line is zero." msgstr "" #: Cura/gui/configWizard.py:1487 #, python-format msgid "Calibration finished. Offsets are: %s %s" msgstr "" #: Cura/gui/configWizard.py:1500 msgid "Please load both extruders with PLA." msgstr "" #: Cura/gui/configWizard.py:1509 msgid "Homing printer and heating up both extruders." msgstr "" #: Cura/gui/configWizard.py:1519 msgid "Please measure the distance between the vertical lines in millimeters." msgstr "" #: Cura/gui/configWizard.py:1526 msgid "" "Which vertical line number lays perfect on top of each other? Leftmost line " "is zero." msgstr "" #: Cura/gui/configWizard.py:1575 msgid "Head offset wizard" msgstr "" #: Cura/gui/expertConfig.py:27 msgid "Expert config" msgstr "" #: Cura/gui/firmwareInstall.py:71 msgid "" "I am sorry, but Cura does not ship with a default firmware for your machine " "configuration." msgstr "" #: Cura/gui/firmwareInstall.py:71 Cura/gui/firmwareInstall.py:76 #: Cura/gui/firmwareInstall.py:131 Cura/gui/mainWindow.py:572 msgid "Firmware update" msgstr "" #: Cura/gui/firmwareInstall.py:76 msgid "" "Cura only supports firmware updates for ATMega2560 based hardware.\n" "So updating your RepRap with Cura might or might not work." msgstr "" #: Cura/gui/firmwareInstall.py:84 Cura/gui/firmwareInstall.py:188 msgid "OK" msgstr "" #: Cura/gui/firmwareInstall.py:105 Cura/gui/firmwareInstall.py:272 msgid "Reading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:107 Cura/gui/firmwareInstall.py:274 msgid "Connecting to machine..." msgstr "" #: Cura/gui/firmwareInstall.py:111 Cura/gui/firmwareInstall.py:278 msgid "" "Please connect the printer to\n" "your computer with the USB cable." msgstr "" #: Cura/gui/firmwareInstall.py:130 msgid "" "Failed to find machine for firmware upgrade\n" "Is your machine connected to the PC?" msgstr "" #: Cura/gui/firmwareInstall.py:137 msgid "" "Failed to install firmware:\n" "This firmware is not compatible with this machine.\n" "Trying to install UMO firmware on an UM2 or UMO+?" msgstr "" #: Cura/gui/firmwareInstall.py:143 msgid "" "Failed to install firmware:\n" "This firmware is not compatible with this machine.\n" "Trying to install UM2 or UMO+ firmware on an UMO?" msgstr "" #: Cura/gui/firmwareInstall.py:148 Cura/gui/firmwareInstall.py:300 msgid "Uploading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:151 Cura/gui/firmwareInstall.py:303 #, python-format msgid "" "Done!\n" "Installed firmware: %s" msgstr "" #: Cura/gui/firmwareInstall.py:153 Cura/gui/firmwareInstall.py:305 msgid "Failed to write firmware.\n" msgstr "" #: Cura/gui/firmwareInstall.py:297 msgid "Failed to connect to programmer.\n" msgstr "" #: Cura/gui/mainWindow.py:72 msgid "Load model file...\tCTRL+L" msgstr "" #: Cura/gui/mainWindow.py:74 msgid "Save model...\tCTRL+S" msgstr "" #: Cura/gui/mainWindow.py:76 msgid "Reload platform\tF5" msgstr "" #: Cura/gui/mainWindow.py:78 msgid "Clear platform" msgstr "" #: Cura/gui/mainWindow.py:82 msgid "Print...\tCTRL+P" msgstr "" #: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:312 msgid "Save GCode..." msgstr "" #: Cura/gui/mainWindow.py:86 msgid "Show slice engine log..." msgstr "" #: Cura/gui/mainWindow.py:90 msgid "Open Profile..." msgstr "" #: Cura/gui/mainWindow.py:93 msgid "Save Profile..." msgstr "" #: Cura/gui/mainWindow.py:100 msgid "Load Profile from GCode..." msgstr "" #: Cura/gui/mainWindow.py:104 msgid "Reset Profile to default" msgstr "" #: Cura/gui/mainWindow.py:109 msgid "Preferences...\tCTRL+," msgstr "" #: Cura/gui/mainWindow.py:111 Cura/gui/mainWindow.py:480 msgid "Machine settings..." msgstr "" #: Cura/gui/mainWindow.py:117 msgid "Recent Model Files" msgstr "" #: Cura/gui/mainWindow.py:124 msgid "Recent Profile Files" msgstr "" #: Cura/gui/mainWindow.py:130 msgid "Quit" msgstr "" #: Cura/gui/mainWindow.py:132 msgid "File" msgstr "" #: Cura/gui/mainWindow.py:140 msgid "Minecraft map import..." msgstr "" #: Cura/gui/mainWindow.py:144 msgid "PID Debugger..." msgstr "" #: Cura/gui/mainWindow.py:146 msgid "Auto Firmware Update..." msgstr "" #: Cura/gui/mainWindow.py:153 msgid "Print all at once" msgstr "" #: Cura/gui/mainWindow.py:155 msgid "Print one at a time" msgstr "" #: Cura/gui/mainWindow.py:162 msgid "Tools" msgstr "" #: Cura/gui/mainWindow.py:168 Cura/util/profile.py:183 msgid "Machine" msgstr "" #: Cura/gui/mainWindow.py:171 msgid "Switch to quickprint..." msgstr "" #: Cura/gui/mainWindow.py:175 msgid "Switch to full settings..." msgstr "" #: Cura/gui/mainWindow.py:180 msgid "Open expert settings...\tCTRL+E" msgstr "" #: Cura/gui/mainWindow.py:184 msgid "Run bed leveling wizard..." msgstr "" #: Cura/gui/mainWindow.py:186 msgid "Run head offset wizard..." msgstr "" #: Cura/gui/mainWindow.py:189 msgid "Expert" msgstr "" #: Cura/gui/mainWindow.py:192 msgid "Online documentation..." msgstr "" #: Cura/gui/mainWindow.py:194 msgid "Report a problem..." msgstr "" #: Cura/gui/mainWindow.py:196 msgid "Check for update..." msgstr "" #: Cura/gui/mainWindow.py:198 msgid "Open YouMagine website..." msgstr "" #: Cura/gui/mainWindow.py:200 msgid "About Cura..." msgstr "" #: Cura/gui/mainWindow.py:202 msgid "Help" msgstr "" #: Cura/gui/mainWindow.py:390 msgid "" "For \"One at a time\" printing, you need to have entered the correct head " "size and gantry height in the machine settings" msgstr "" #: Cura/gui/mainWindow.py:390 msgid "One at a time warning" msgstr "" #: Cura/gui/mainWindow.py:478 msgid "Add new machine..." msgstr "" #: Cura/gui/mainWindow.py:486 msgid "Install default firmware..." msgstr "" #: Cura/gui/mainWindow.py:489 msgid "Install custom firmware..." msgstr "" #: Cura/gui/mainWindow.py:493 msgid "Select profile file to load" msgstr "" #: Cura/gui/mainWindow.py:505 msgid "Select gcode file to load profile from" msgstr "" #: Cura/gui/mainWindow.py:520 msgid "" "No profile found in GCode file.\n" "This feature only works with GCode files made by Cura 12.07 or newer." msgstr "" #: Cura/gui/mainWindow.py:520 msgid "Profile load error" msgstr "" #: Cura/gui/mainWindow.py:524 Cura/gui/mainWindow.py:534 msgid "Select profile file to save" msgstr "" #: Cura/gui/mainWindow.py:544 msgid "" "This will reset all profile settings to defaults.\n" "Unless you have saved your current profile, all settings will be lost!\n" "Do you really want to reset?" msgstr "" #: Cura/gui/mainWindow.py:544 msgid "Profile reset" msgstr "" #: Cura/gui/mainWindow.py:557 msgid "" "Copy the settings from quickprint to your full settings?\n" "(This will overwrite any full setting modifications you have)" msgstr "" #: Cura/gui/mainWindow.py:557 msgid "Profile copy" msgstr "" #: Cura/gui/mainWindow.py:572 msgid "" "Warning: Installing a custom firmware does not guarantee that you machine " "will function correctly, and could damage your machine." msgstr "" #: Cura/gui/mainWindow.py:573 Cura/gui/mainWindow.py:616 msgid "Open firmware to upload" msgstr "" #: Cura/gui/mainWindow.py:645 msgid "You are running the latest version of Cura!" msgstr "" #: Cura/gui/mainWindow.py:645 msgid "Awesome!" msgstr "" #: Cura/gui/mainWindow.py:690 msgid "Basic" msgstr "" #: Cura/gui/mainWindow.py:694 msgid "Advanced" msgstr "" #: Cura/gui/mainWindow.py:700 msgid "Plugins" msgstr "" #: Cura/gui/pluginPanel.py:31 msgid "Plugins:" msgstr "" #: Cura/gui/pluginPanel.py:35 msgid "Open plugin location" msgstr "" #: Cura/gui/pluginPanel.py:36 msgid "Enabled plugins" msgstr "" #: Cura/gui/pluginPanel.py:159 msgid "You need to select a plugin before you can add anything." msgstr "" #: Cura/gui/pluginPanel.py:159 msgid "Error: no plugin selected" msgstr "" #: Cura/gui/preferencesDialog.py:15 msgid "Preferences" msgstr "" #: Cura/gui/preferencesDialog.py:29 msgid "Print window" msgstr "" #: Cura/gui/preferencesDialog.py:32 msgid "Colours" msgstr "" #: Cura/gui/preferencesDialog.py:38 Cura/util/profile.py:506 msgid "Language" msgstr "" #: Cura/gui/preferencesDialog.py:41 msgid "Filament settings" msgstr "" #: Cura/gui/preferencesDialog.py:58 msgid "Cura settings" msgstr "" #: Cura/gui/preferencesDialog.py:80 msgid "Select replication root folder" msgstr "" #: Cura/gui/preferencesDialog.py:97 Cura/gui/preferencesDialog.py:113 msgid "Machine settings" msgstr "" #: Cura/gui/preferencesDialog.py:124 msgid "Printer head size" msgstr "" #: Cura/gui/preferencesDialog.py:132 #, python-format msgid "Extruder %d" msgstr "" #: Cura/gui/preferencesDialog.py:136 msgid "Communication settings" msgstr "" #: Cura/gui/preferencesDialog.py:148 msgid "Ok" msgstr "" #: Cura/gui/preferencesDialog.py:152 msgid "Add new machine" msgstr "" #: Cura/gui/preferencesDialog.py:156 msgid "Remove machine" msgstr "" #: Cura/gui/preferencesDialog.py:160 Cura/gui/preferencesDialog.py:196 msgid "Change machine name" msgstr "" #: Cura/gui/preferencesDialog.py:182 msgid "Cannot remove the last machine configuration in Cura" msgstr "" #: Cura/gui/preferencesDialog.py:182 msgid "Machine remove error" msgstr "" #: Cura/gui/preferencesDialog.py:196 msgid "Enter the new name:" msgstr "" #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312 #, python-format msgid "Printing on %s" msgstr "" #: Cura/gui/printWindow.py:324 msgid "" "Your computer is running on battery power.\n" "Connect your computer to AC power or your print might not finish." msgstr "" #: Cura/gui/printWindow.py:334 msgid "" "InfoLine from printer connection\n" "InfoLine from dialog\n" "Extra line\n" "More lines for layout\n" "More lines for layout\n" "More lines for layout" msgstr "" #: Cura/gui/printWindow.py:336 msgid "Connect" msgstr "" #: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:66 msgid "Print" msgstr "" #: Cura/gui/printWindow.py:339 msgid "Pause" msgstr "" #: Cura/gui/printWindow.py:340 msgid "Cancel print" msgstr "" #: Cura/gui/printWindow.py:341 msgid "Error log" msgstr "" #: Cura/gui/sceneView.py:65 msgid "Load" msgstr "" #: Cura/gui/sceneView.py:70 msgid "Rotate" msgstr "" #: Cura/gui/sceneView.py:71 msgid "Scale" msgstr "" #: Cura/gui/sceneView.py:72 msgid "Mirror" msgstr "" #: Cura/gui/sceneView.py:74 Cura/gui/sceneView.py:77 msgid "Reset" msgstr "" #: Cura/gui/sceneView.py:75 msgid "Lay flat" msgstr "" #: Cura/gui/sceneView.py:78 msgid "To max" msgstr "" #: Cura/gui/sceneView.py:80 msgid "Mirror X" msgstr "" #: Cura/gui/sceneView.py:81 msgid "Mirror Y" msgstr "" #: Cura/gui/sceneView.py:82 msgid "Mirror Z" msgstr "" #: Cura/gui/sceneView.py:90 msgid "Scale X" msgstr "" #: Cura/gui/sceneView.py:92 msgid "Scale Y" msgstr "" #: Cura/gui/sceneView.py:94 msgid "Scale Z" msgstr "" #: Cura/gui/sceneView.py:96 msgid "Size X (mm)" msgstr "" #: Cura/gui/sceneView.py:98 msgid "Size Y (mm)" msgstr "" #: Cura/gui/sceneView.py:100 msgid "Size Z (mm)" msgstr "" #: Cura/gui/sceneView.py:102 msgid "Uniform scale" msgstr "" #: Cura/gui/sceneView.py:105 msgid "View mode" msgstr "" #: Cura/gui/sceneView.py:105 msgid "Normal" msgstr "" #: Cura/gui/sceneView.py:105 msgid "Overhang" msgstr "" #: Cura/gui/sceneView.py:105 msgid "Transparent" msgstr "" #: Cura/gui/sceneView.py:105 msgid "X-Ray" msgstr "" #: Cura/gui/sceneView.py:105 msgid "Layers" msgstr "" #: Cura/gui/sceneView.py:107 msgid "Share on YouMagine" msgstr "" #: Cura/gui/sceneView.py:224 msgid "Open 3D model" msgstr "" #: Cura/gui/sceneView.py:249 msgid "Save 3D model" msgstr "" #: Cura/gui/sceneView.py:309 Cura/gui/sceneView.py:994 #, python-format msgid "Print with %s" msgstr "" #: Cura/gui/sceneView.py:313 msgid "Slice engine log..." msgstr "" #: Cura/gui/sceneView.py:340 Cura/gui/sceneView.py:997 msgid "Save toolpath" msgstr "" #: Cura/gui/sceneView.py:387 msgid "The slicing engine reported the following" msgstr "" #: Cura/gui/sceneView.py:387 msgid "Engine log..." msgstr "" #: Cura/gui/sceneView.py:526 msgid "How many copies do you want?" msgstr "" #: Cura/gui/sceneView.py:526 msgid "Number of copies" msgstr "" #: Cura/gui/sceneView.py:526 msgid "Multiply" msgstr "" #: Cura/gui/sceneView.py:549 msgid "" "Cannot fit all the requested duplicates. Do you want to try and reset object " "positions?" msgstr "" #: Cura/gui/sceneView.py:549 msgid "Reset Positions" msgstr "" #: Cura/gui/sceneView.py:856 msgid "Center on platform" msgstr "" #: Cura/gui/sceneView.py:857 msgid "Delete object" msgstr "" #: Cura/gui/sceneView.py:858 msgid "Multiply object" msgstr "" #: Cura/gui/sceneView.py:859 msgid "Split object into parts" msgstr "" #: Cura/gui/sceneView.py:862 msgid "Dual extrusion merge" msgstr "" #: Cura/gui/sceneView.py:864 msgid "Delete all objects" msgstr "" #: Cura/gui/sceneView.py:865 msgid "Reload all objects" msgstr "" #: Cura/gui/sceneView.py:866 msgid "Reset all objects positions" msgstr "" #: Cura/gui/sceneView.py:867 msgid "Reset all objects transformations" msgstr "" #: Cura/gui/sceneView.py:991 msgid "Toolpath to SD" msgstr "" #: Cura/gui/sceneView.py:1285 msgid "Overhang view not working due to lack of OpenGL shaders support." msgstr "" #: Cura/gui/simpleMode.py:52 msgid "Print support structure" msgstr "" #: Cura/gui/simpleMode.py:57 msgid "Select a quickprint profile:" msgstr "" #: Cura/gui/simpleMode.py:65 msgid "Material:" msgstr "" #: Cura/gui/simpleMode.py:73 msgid "Other:" msgstr "" #: Cura/gui/tools/imageToMesh.py:28 msgid "Height (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:32 msgid "Base (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:36 msgid "Width (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:40 msgid "Depth (mm)" msgstr "" #: Cura/gui/tools/projector.py:42 msgid "Edit" msgstr "" #: Cura/gui/tools/projector.py:43 msgid "Rectangle" msgstr "" #: Cura/gui/tools/projector.py:44 msgid "Circle" msgstr "" #: Cura/gui/tools/projector.py:45 msgid "Draw curves" msgstr "" #: Cura/gui/tools/youmagineGui.py:78 msgid "Checking token" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 msgid "Failed to contact YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153 msgid "YouMagine error." msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "Cura is now authorized to share on YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "YouMagine." msgstr "" #: Cura/gui/tools/youmagineGui.py:112 msgid "Creating new design on YouMagine..." msgstr "" #: Cura/gui/tools/youmagineGui.py:116 msgid "Failed to create a design, nothing uploaded!" msgstr "" #: Cura/gui/tools/youmagineGui.py:120 #, python-format msgid "Building model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:131 #, python-format msgid "Uploading model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 #, python-format msgid "Failed to upload %s!" msgstr "" #: Cura/gui/tools/youmagineGui.py:137 #, python-format msgid "Uploading file %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:145 #, python-format msgid "Uploading image %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:153 msgid "Failed to upload snapshot!" msgstr "" #: Cura/gui/tools/youmagineGui.py:158 msgid "Publishing design..." msgstr "" #: Cura/gui/tools/youmagineGui.py:230 msgid "Request authorization from YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:231 msgid "Paste token here" msgstr "" #: Cura/gui/tools/youmagineGui.py:237 msgid "" "To share your designs on YouMagine\n" "you need an account on YouMagine.com\n" "and authorize Cura to access your account." msgstr "" #: Cura/gui/tools/youmagineGui.py:239 msgid "" "This will open a browser window where you can\n" "authorize Cura to access your YouMagine account.\n" "You can revoke access at any time\n" "from YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:274 msgid "Design name" msgstr "" #: Cura/gui/tools/youmagineGui.py:278 msgid "Publish after upload" msgstr "" #: Cura/gui/tools/youmagineGui.py:279 msgid "Share!" msgstr "" #: Cura/gui/tools/youmagineGui.py:287 msgid "Add..." msgstr "" #: Cura/gui/tools/youmagineGui.py:289 msgid "Webcam..." msgstr "" #: Cura/gui/tools/youmagineGui.py:299 msgid "" "Directly publish the design after uploading.\n" "Without this check the design will not be public\n" "until you publish it yourself on YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:305 msgid "Design name:" msgstr "" #: Cura/gui/tools/youmagineGui.py:307 msgid "Description:" msgstr "" #: Cura/gui/tools/youmagineGui.py:309 msgid "Category:" msgstr "" #: Cura/gui/tools/youmagineGui.py:311 msgid "License:" msgstr "" #: Cura/gui/tools/youmagineGui.py:314 msgid "Images:" msgstr "" #: Cura/gui/tools/youmagineGui.py:317 msgid "Related design files:" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 msgid "The name cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344 msgid "New design error." msgstr "" #: Cura/gui/tools/youmagineGui.py:344 msgid "The description cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "No webcam found on your system" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "Webcam error" msgstr "" #: Cura/gui/util/engineResultView.py:29 msgid "Single Layer" msgstr "" #: Cura/gui/util/engineResultView.py:186 #, python-format msgid "Loading toolpath for visualization (%d%%)" msgstr "" #: Cura/gui/util/openglGui.py:242 msgid "An error has occurred during the 3D view drawing." msgstr "" #: Cura/gui/util/openglGui.py:250 msgid "3D window error" msgstr "" #: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180 #: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:212 #: Cura/util/profile.py:214 msgid "Quality" msgstr "" #: Cura/util/profile.py:178 msgid "Layer height (mm)" msgstr "" #: Cura/util/profile.py:178 msgid "" "Layer height in millimeters.\n" "This is the most important setting to determine the quality of your print. " "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to " "0.25mm with an Ultimaker for very fast prints at low quality." msgstr "" #: Cura/util/profile.py:179 msgid "Shell thickness (mm)" msgstr "" #: Cura/util/profile.py:179 msgid "" "Thickness of the outside shell in the horizontal direction.\n" "This is used in combination with the nozzle size to define the number\n" "of perimeter lines and the thickness of those perimeter lines." msgstr "" #: Cura/util/profile.py:180 Cura/util/profile.py:203 Cura/util/profile.py:204 #: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207 #: Cura/util/profile.py:208 Cura/util/profile.py:209 msgid "Retraction" msgstr "" #: Cura/util/profile.py:180 msgid "Enable retraction" msgstr "" #: Cura/util/profile.py:180 msgid "" "Retract the filament when the nozzle is moving over a none-printed area. " "Details about the retraction can be configured in the advanced tab." msgstr "" #: Cura/util/profile.py:181 Cura/util/profile.py:182 msgid "Fill" msgstr "" #: Cura/util/profile.py:181 msgid "Bottom/Top thickness (mm)" msgstr "" #: Cura/util/profile.py:181 msgid "" "This controls the thickness of the bottom and top layers, the amount of " "solid layers put down is calculated by the layer thickness and this value.\n" "Having this value a multiple of the layer thickness makes sense. And keep it " "near your wall thickness to make an evenly strong part." msgstr "" #: Cura/util/profile.py:182 Cura/util/profile.py:232 Cura/util/profile.py:233 #: Cura/util/profile.py:234 msgid "Infill" msgstr "" #: Cura/util/profile.py:182 msgid "Fill Density (%)" msgstr "" #: Cura/util/profile.py:182 msgid "" "This controls how densely filled the insides of your print will be. For a " "solid part use 100%, for an empty part use 0%. A value around 20% is usually " "enough.\n" "This won't affect the outside of the print and only adjusts how strong the " "part becomes." msgstr "" #: Cura/util/profile.py:183 msgid "" "The nozzle size is very important, this is used to calculate the line width " "of the infill, and used to calculate the amount of outside wall lines and " "thickness for the wall thickness you entered in the print settings." msgstr "" #: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186 #: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189 #: Cura/util/profile.py:190 msgid "Speed and Temperature" msgstr "" #: Cura/util/profile.py:184 msgid "Print speed (mm/s)" msgstr "" #: Cura/util/profile.py:184 msgid "" "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/" "s, but for good quality prints you want to print slower. Printing speed " "depends on a lot of factors. So you will be experimenting with optimal " "settings for this." msgstr "" #: Cura/util/profile.py:185 msgid "Printing temperature (C)" msgstr "" #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187 #: Cura/util/profile.py:188 Cura/util/profile.py:189 msgid "" "Temperature used for printing. Set at 0 to pre-heat yourself.\n" "For PLA a value of 210C is usually used.\n" "For ABS a value of 230C or higher is required." msgstr "" #: Cura/util/profile.py:186 msgid "2nd nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:187 msgid "3th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:188 msgid "4th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:189 msgid "5th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:190 msgid "Bed temperature (C)" msgstr "" #: Cura/util/profile.py:190 msgid "" "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself." msgstr "" #: Cura/util/profile.py:191 Cura/util/profile.py:192 msgid "None" msgstr "" #: Cura/util/profile.py:191 msgid "Touching buildplate" msgstr "" #: Cura/util/profile.py:191 msgid "Everywhere" msgstr "" #: Cura/util/profile.py:191 Cura/util/profile.py:192 Cura/util/profile.py:193 #: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237 #: Cura/util/profile.py:238 Cura/util/profile.py:239 msgid "Support" msgstr "" #: Cura/util/profile.py:191 msgid "Support type" msgstr "" #: Cura/util/profile.py:191 msgid "" "Type of support structure build.\n" "\"Touching buildplate\" is the most commonly used support setting.\n" "\n" "None does not do any support.\n" "Touching buildplate only creates support where the support structure will " "touch the build platform.\n" "Everywhere creates support even on top of parts of the model." msgstr "" #: Cura/util/profile.py:192 Cura/util/profile.py:243 msgid "Brim" msgstr "" #: Cura/util/profile.py:192 Cura/util/profile.py:244 Cura/util/profile.py:245 #: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248 #: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251 #: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254 msgid "Raft" msgstr "" #: Cura/util/profile.py:192 Cura/util/profile.py:224 Cura/util/profile.py:225 #: Cura/util/profile.py:226 msgid "Skirt" msgstr "" #: Cura/util/profile.py:192 msgid "Platform adhesion type" msgstr "" #: Cura/util/profile.py:192 msgid "" "Different options that help in preventing corners from lifting due to " "warping.\n" "Brim adds a single layer thick flat area around your object which is easy to " "cut off afterwards, and it is the recommended option.\n" "Raft adds a thick raster below the object and a thin interface between this " "and your object.\n" "(Note that enabling the brim or raft disables the skirt)" msgstr "" #: Cura/util/profile.py:193 msgid "Both" msgstr "" #: Cura/util/profile.py:193 msgid "First extruder" msgstr "" #: Cura/util/profile.py:193 msgid "Second extruder" msgstr "" #: Cura/util/profile.py:193 msgid "Support dual extrusion" msgstr "" #: Cura/util/profile.py:193 msgid "" "Which extruder to use for support material, for break-away support you can " "use both extruders.\n" "But if one of the materials is more expensive then the other you could " "select an extruder to use for support material. This causes more extruder " "switches.\n" "You can also use the 2nd extruder for soluble support materials." msgstr "" #: Cura/util/profile.py:194 Cura/util/profile.py:195 Cura/util/profile.py:196 msgid "Dual extrusion" msgstr "" #: Cura/util/profile.py:194 msgid "Wipe&prime tower" msgstr "" #: Cura/util/profile.py:194 msgid "" "The wipe-tower is a tower printed on every layer when switching between " "nozzles.\n" "The old nozzle is wiped off on the tower before the new nozzle is used to " "print the 2nd color." msgstr "" #: Cura/util/profile.py:195 msgid "Wipe&prime tower volume per layer (mm3)" msgstr "" #: Cura/util/profile.py:195 msgid "" "The amount of material put in the wipe/prime tower.\n" "This is done in volume because in general you want to extrude a\n" "certain amount of volume to get the extruder going, independent on the layer " "height.\n" "This means that with thinner layers, your tower gets bigger." msgstr "" #: Cura/util/profile.py:196 msgid "Ooze shield" msgstr "" #: Cura/util/profile.py:196 msgid "" "The ooze shield is a 1 line thick shell around the object which stands a few " "mm from the object.\n" "This shield catches any oozing from the unused nozzle in dual-extrusion." msgstr "" #: Cura/util/profile.py:197 Cura/util/profile.py:198 Cura/util/profile.py:199 #: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202 msgid "Filament" msgstr "" #: Cura/util/profile.py:197 msgid "Diameter (mm)" msgstr "" #: Cura/util/profile.py:197 msgid "" "Diameter of your filament, as accurately as possible.\n" "If you cannot measure this value you will have to calibrate it, a higher " "number means less extrusion, a smaller number generates more extrusion." msgstr "" #: Cura/util/profile.py:198 msgid "Diameter2 (mm)" msgstr "" #: Cura/util/profile.py:198 msgid "" "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:199 msgid "Diameter3 (mm)" msgstr "" #: Cura/util/profile.py:199 msgid "" "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:200 msgid "Diameter4 (mm)" msgstr "" #: Cura/util/profile.py:200 msgid "" "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:201 msgid "Diameter5 (mm)" msgstr "" #: Cura/util/profile.py:201 msgid "" "Diameter of your filament for the 5th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:202 msgid "Flow (%)" msgstr "" #: Cura/util/profile.py:202 msgid "" "Flow compensation, the amount of material extruded is multiplied by this " "value" msgstr "" #: Cura/util/profile.py:203 msgid "Speed (mm/s)" msgstr "" #: Cura/util/profile.py:203 msgid "" "Speed at which the filament is retracted, a higher retraction speed works " "better. But a very high retraction speed can lead to filament grinding." msgstr "" #: Cura/util/profile.py:204 msgid "Distance (mm)" msgstr "" #: Cura/util/profile.py:204 msgid "" "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm " "seems to generate good results." msgstr "" #: Cura/util/profile.py:205 msgid "Dual extrusion switch amount (mm)" msgstr "" #: Cura/util/profile.py:205 msgid "" "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for " "no retraction at all. A value of 16.0mm seems to generate good results." msgstr "" #: Cura/util/profile.py:206 msgid "Minimum travel (mm)" msgstr "" #: Cura/util/profile.py:206 msgid "" "Minimum amount of travel needed for a retraction to happen at all. To make " "sure you do not get a lot of retractions in a small area." msgstr "" #: Cura/util/profile.py:207 msgid "Off" msgstr "" #: Cura/util/profile.py:207 msgid "All" msgstr "" #: Cura/util/profile.py:207 msgid "No Skin" msgstr "" #: Cura/util/profile.py:207 msgid "Enable combing" msgstr "" #: Cura/util/profile.py:207 msgid "" "Combing is the act of avoiding holes in the print for the head to travel " "over. If combing is 'Off' the printer head moves straight from the start " "point to the end point and it will always retract. If 'All', enable combing " "on all surfaces. If 'No Skin', enable combing on all except skin surfaces." msgstr "" #: Cura/util/profile.py:208 msgid "Minimal extrusion before retracting (mm)" msgstr "" #: Cura/util/profile.py:208 msgid "" "The minimal amount of extrusion that needs to be done before retracting " "again if a retraction needs to happen before this minimal is reached the " "retraction is ignored.\n" "This avoids retracting a lot on the same piece of filament which flattens " "the filament and causes grinding issues." msgstr "" #: Cura/util/profile.py:209 msgid "Z hop when retracting (mm)" msgstr "" #: Cura/util/profile.py:209 msgid "" "When a retraction is done, the head is lifted by this amount to travel over " "the print. A value of 0.075 works well. This feature has a lot of positive " "effect on delta towers." msgstr "" #: Cura/util/profile.py:210 msgid "Initial layer thickness (mm)" msgstr "" #: Cura/util/profile.py:210 msgid "" "Layer thickness of the bottom layer. A thicker bottom layer makes sticking " "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as " "the other layers." msgstr "" #: Cura/util/profile.py:211 msgid "Initial layer line width (%)" msgstr "" #: Cura/util/profile.py:211 msgid "" "Extra width factor for the extrusion on the first layer, on some printers " "it's good to have wider extrusion on the first layer to get better bed " "adhesion." msgstr "" #: Cura/util/profile.py:212 msgid "Cut off object bottom (mm)" msgstr "" #: Cura/util/profile.py:212 msgid "" "Sinks the object into the platform, this can be used for objects that do not " "have a flat bottom and thus create a too small first layer." msgstr "" #: Cura/util/profile.py:214 msgid "Dual extrusion overlap (mm)" msgstr "" #: Cura/util/profile.py:214 msgid "" "Add a certain amount of overlapping extrusion on dual-extrusion prints. This " "bonds the different colors together." msgstr "" #: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217 #: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:220 msgid "Speed" msgstr "" #: Cura/util/profile.py:215 msgid "Travel speed (mm/s)" msgstr "" #: Cura/util/profile.py:215 msgid "" "Speed at which travel moves are done, a well built Ultimaker can reach " "speeds of 250mm/s. But some machines might miss steps then." msgstr "" #: Cura/util/profile.py:216 msgid "Bottom layer speed (mm/s)" msgstr "" #: Cura/util/profile.py:216 msgid "" "Print speed for the bottom layer, you want to print the first layer slower " "so it sticks better to the printer bed." msgstr "" #: Cura/util/profile.py:217 msgid "Infill speed (mm/s)" msgstr "" #: Cura/util/profile.py:217 msgid "" "Speed at which infill parts are printed. If set to 0 then the print speed is " "used for the infill. Printing the infill faster can greatly reduce printing " "time, but this can negatively affect print quality." msgstr "" #: Cura/util/profile.py:218 msgid "Top/bottom speed (mm/s)" msgstr "" #: Cura/util/profile.py:218 msgid "" "Speed at which top/bottom parts are printed. If set to 0 then the print " "speed is used for the infill. Printing the top/bottom faster can greatly " "reduce printing time, but this can negatively affect print quality." msgstr "" #: Cura/util/profile.py:219 msgid "Outer shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:219 msgid "" "Speed at which outer shell is printed. If set to 0 then the print speed is " "used. Printing the outer shell at a lower speed improves the final skin " "quality. However, having a large difference between the inner shell speed " "and the outer shell speed will effect quality in a negative way." msgstr "" #: Cura/util/profile.py:220 msgid "Inner shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:220 msgid "" "Speed at which inner shells are printed. If set to 0 then the print speed is " "used. Printing the inner shell faster then the outer shell will reduce " "printing time. It is good to set this somewhere in between the outer shell " "speed and the infill/printing speed." msgstr "" #: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:227 #: Cura/util/profile.py:228 Cura/util/profile.py:229 Cura/util/profile.py:230 #: Cura/util/profile.py:231 msgid "Cool" msgstr "" #: Cura/util/profile.py:221 msgid "Minimal layer time (sec)" msgstr "" #: Cura/util/profile.py:221 msgid "" "Minimum time spent in a layer, gives the layer time to cool down before the " "next layer is put on top. If the layer will be placed down too fast the " "printer will slow down to make sure it has spent at least this amount of " "seconds printing this layer." msgstr "" #: Cura/util/profile.py:222 msgid "Enable cooling fan" msgstr "" #: Cura/util/profile.py:222 msgid "" "Enable the cooling fan during the print. The extra cooling from the cooling " "fan is essential during faster prints." msgstr "" #: Cura/util/profile.py:224 msgid "Line count" msgstr "" #: Cura/util/profile.py:224 msgid "" "The skirt is a line drawn around the object at the first layer. This helps " "to prime your extruder, and to see if the object fits on your platform.\n" "Setting this to 0 will disable the skirt. Multiple skirt lines can help " "priming your extruder better for small objects." msgstr "" #: Cura/util/profile.py:225 msgid "Start distance (mm)" msgstr "" #: Cura/util/profile.py:225 msgid "" "The distance between the skirt and the first layer.\n" "This is the minimal distance, multiple skirt lines will be put outwards from " "this distance." msgstr "" #: Cura/util/profile.py:226 msgid "Minimal length (mm)" msgstr "" #: Cura/util/profile.py:226 msgid "" "The minimal length of the skirt, if this minimal length is not reached it " "will add more skirt lines to reach this minimal lenght.\n" "Note: If the line count is set to 0 this is ignored." msgstr "" #: Cura/util/profile.py:227 msgid "Fan full on at height (mm)" msgstr "" #: Cura/util/profile.py:227 msgid "" "The height at which the fan is turned on completely. For the layers below " "this the fan speed is scaled linearly with the fan off at layer 0." msgstr "" #: Cura/util/profile.py:228 msgid "Fan speed min (%)" msgstr "" #: Cura/util/profile.py:228 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Minimal fan speed is used if the layer is not slowed down due to cooling." msgstr "" #: Cura/util/profile.py:229 msgid "Fan speed max (%)" msgstr "" #: Cura/util/profile.py:229 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Maximal fan speed is used if the layer is slowed down due to cooling by more " "than 200%." msgstr "" #: Cura/util/profile.py:230 msgid "Minimum speed (mm/s)" msgstr "" #: Cura/util/profile.py:230 msgid "" "The minimal layer time can cause the print to slow down so much it starts to " "ooze. The minimal feedrate protects against this. Even if a print gets " "slowed down it will never be slower than this minimal speed." msgstr "" #: Cura/util/profile.py:231 msgid "Cool head lift" msgstr "" #: Cura/util/profile.py:231 msgid "" "Lift the head if the minimal speed is hit because of cool slowdown, and wait " "the extra time so the minimal layer time is always hit." msgstr "" #: Cura/util/profile.py:232 msgid "Solid infill top" msgstr "" #: Cura/util/profile.py:232 msgid "" "Create a solid top surface, if set to false the top is filled with the fill " "percentage. Useful for cups/vases." msgstr "" #: Cura/util/profile.py:233 msgid "Solid infill bottom" msgstr "" #: Cura/util/profile.py:233 msgid "" "Create a solid bottom surface, if set to false the bottom is filled with the " "fill percentage. Useful for buildings." msgstr "" #: Cura/util/profile.py:234 msgid "Infill overlap (%)" msgstr "" #: Cura/util/profile.py:234 msgid "" "Amount of overlap between the infill and the walls. There is a slight " "overlap with the walls and the infill so the walls connect firmly to the " "infill." msgstr "" #: Cura/util/profile.py:235 msgid "Structure type" msgstr "" #: Cura/util/profile.py:235 msgid "" "The type of support structure.\n" "Grid is very strong and can come off in 1 piece, however, sometimes it is " "too strong.\n" "Lines are single walled lines that break off one at a time. Which is more " "work to remove, but as it is less strong it does work better on tricky " "prints." msgstr "" #: Cura/util/profile.py:236 msgid "Overhang angle for support (deg)" msgstr "" #: Cura/util/profile.py:236 msgid "" "The minimal angle that overhangs need to have to get support. With 90 degree " "being horizontal and 0 degree being vertical." msgstr "" #: Cura/util/profile.py:237 msgid "Fill amount (%)" msgstr "" #: Cura/util/profile.py:237 #, python-format msgid "" "Amount of infill structure in the support material, less material gives " "weaker support which is easier to remove. 15% seems to be a good average." msgstr "" #: Cura/util/profile.py:238 msgid "Distance X/Y (mm)" msgstr "" #: Cura/util/profile.py:238 msgid "" "Distance of the support material from the print, in the X/Y directions.\n" "0.7mm gives a nice distance from the print so the support does not stick to " "the print." msgstr "" #: Cura/util/profile.py:239 msgid "Distance Z (mm)" msgstr "" #: Cura/util/profile.py:239 msgid "" "Distance from the top/bottom of the support to the print. A small gap here " "makes it easier to remove the support but makes the print a bit uglier.\n" "0.15mm gives a good seperation of the support material." msgstr "" #: Cura/util/profile.py:240 Cura/util/profile.py:241 msgid "Black Magic" msgstr "" #: Cura/util/profile.py:240 msgid "Spiralize the outer contour" msgstr "" #: Cura/util/profile.py:240 msgid "" "Spiralize is smoothing out the Z move of the outer edge. This will create a " "steady Z increase over the whole print. This feature turns a solid object " "into a single walled print with a solid bottom.\n" "This feature used to be called Joris in older versions." msgstr "" #: Cura/util/profile.py:241 msgid "Only follow mesh surface" msgstr "" #: Cura/util/profile.py:241 msgid "" "Only follow the mesh surfaces of the 3D model, do not do anything else. No " "infill, no top/bottom, nothing." msgstr "" #: Cura/util/profile.py:243 msgid "Brim line amount" msgstr "" #: Cura/util/profile.py:243 msgid "" "The amount of lines used for a brim, more lines means a larger brim which " "sticks better, but this also makes your effective print area smaller." msgstr "" #: Cura/util/profile.py:244 msgid "Extra margin (mm)" msgstr "" #: Cura/util/profile.py:244 msgid "" "If the raft is enabled, this is the extra raft area around the object which " "is also rafted. Increasing this margin will create a stronger raft while " "using more material and leaving less area for your print." msgstr "" #: Cura/util/profile.py:245 msgid "Line spacing (mm)" msgstr "" #: Cura/util/profile.py:245 msgid "" "When you are using the raft this is the distance between the centerlines of " "the raft line." msgstr "" #: Cura/util/profile.py:246 msgid "Base thickness (mm)" msgstr "" #: Cura/util/profile.py:246 msgid "" "When you are using the raft this is the thickness of the base layer which is " "put down." msgstr "" #: Cura/util/profile.py:247 msgid "Base line width (mm)" msgstr "" #: Cura/util/profile.py:247 msgid "" "When you are using the raft this is the width of the base layer lines which " "are put down." msgstr "" #: Cura/util/profile.py:248 msgid "Interface thickness (mm)" msgstr "" #: Cura/util/profile.py:248 msgid "" "When you are using the raft this is the thickness of the interface layer " "which is put down." msgstr "" #: Cura/util/profile.py:249 msgid "Interface line width (mm)" msgstr "" #: Cura/util/profile.py:249 msgid "" "When you are using the raft this is the width of the interface layer lines " "which are put down." msgstr "" #: Cura/util/profile.py:250 msgid "Airgap" msgstr "" #: Cura/util/profile.py:250 msgid "Gap between the last layer of the raft the whole print." msgstr "" #: Cura/util/profile.py:251 msgid "First Layer Airgap" msgstr "" #: Cura/util/profile.py:251 msgid "" "Gap between the last layer of the raft and the first printing layer. A small " "gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This " "value is added on top of the 'Airgap' setting." msgstr "" #: Cura/util/profile.py:252 msgid "Surface layers" msgstr "" #: Cura/util/profile.py:252 msgid "" "Amount of surface layers put on top of the raft, these are fully filled " "layers on which the model is printed." msgstr "" #: Cura/util/profile.py:253 msgid "Surface layer thickness (mm)" msgstr "" #: Cura/util/profile.py:253 msgid "Thickness of each surface layer." msgstr "" #: Cura/util/profile.py:254 msgid "Surface layer line width (mm)" msgstr "" #: Cura/util/profile.py:254 msgid "Width of the lines for each surface layer." msgstr "" #: Cura/util/profile.py:255 Cura/util/profile.py:256 Cura/util/profile.py:257 #: Cura/util/profile.py:258 msgid "Fix horrible" msgstr "" #: Cura/util/profile.py:255 msgid "Combine everything (Type-A)" msgstr "" #: Cura/util/profile.py:255 Cura/util/profile.py:256 msgid "" "This expert option adds all parts of the model together. The result is " "usually that internal cavities disappear. Depending on the model this can be " "intended or not. Enabling this option is at your own risk. Type-A is " "dependent on the model normals and tries to keep some internal holes intact. " "Type-B ignores all internal holes and only keeps the outside shape per layer." msgstr "" #: Cura/util/profile.py:256 msgid "Combine everything (Type-B)" msgstr "" #: Cura/util/profile.py:257 msgid "Keep open faces" msgstr "" #: Cura/util/profile.py:257 msgid "" "This expert option keeps all the open bits of the model intact. Normally " "Cura tries to stitch up small holes and remove everything with big holes, " "but this option keeps bits that are not properly part of anything and just " "goes with whatever is left. This option is usually not what you want, but it " "might enable you to slice models otherwise failing to produce proper paths.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:258 msgid "Extensive stitching" msgstr "" #: Cura/util/profile.py:258 msgid "" "Extensive stitching tries to fix up open holes in the model by closing the " "hole with touching polygons. This algorthm is quite expensive and could " "introduce a lot of processing time.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:486 msgid "Save profile on slice" msgstr "" #: Cura/util/profile.py:486 msgid "" "When slicing save the profile as [stl_file]_profile.ini next to the model." msgstr "" #: Cura/util/profile.py:487 msgid "Cost (price/kg)" msgstr "" #: Cura/util/profile.py:487 msgid "Cost of your filament per kg, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:488 msgid "Cost (price/m)" msgstr "" #: Cura/util/profile.py:488 msgid "" "Cost of your filament per meter, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:489 msgid "Auto detect SD card drive" msgstr "" #: Cura/util/profile.py:489 msgid "" "Auto detect the SD card. You can disable this because on some systems " "external hard-drives or USB sticks are detected as SD card." msgstr "" #: Cura/util/profile.py:501 msgid "Base folder to replicate on SD card" msgstr "" #: Cura/util/profile.py:501 msgid "" "The specified folder will be used as a base path. Any gcode generated from " "object coming from within that folder will be automatically saved on the SD " "card at the same sub-folder. Any object coming from outside of this path " "will save the gcode on the root folder of the card." msgstr "" #: Cura/util/profile.py:502 msgid "Check for updates" msgstr "" #: Cura/util/profile.py:502 msgid "Check for newer versions of Cura on startup" msgstr "" #: Cura/util/profile.py:503 msgid "Send usage statistics" msgstr "" #: Cura/util/profile.py:503 msgid "Submit anonymous usage information to improve future versions of Cura" msgstr "" #: Cura/util/profile.py:505 msgid "Density (kg/m3)" msgstr "" #: Cura/util/profile.py:505 msgid "" "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. " "This value is used to estimate the weight if the filament used for the print." msgstr "" #: Cura/util/profile.py:506 msgid "" "Change the language in which Cura runs. Switching language requires a " "restart of Cura" msgstr "" #: Cura/util/profile.py:509 msgid "Model colour" msgstr "" #: Cura/util/profile.py:509 msgid "Display color for first extruder" msgstr "" #: Cura/util/profile.py:510 msgid "Model colour (2)" msgstr "" #: Cura/util/profile.py:510 msgid "Display color for second extruder" msgstr "" #: Cura/util/profile.py:511 msgid "Model colour (3)" msgstr "" #: Cura/util/profile.py:511 msgid "Display color for third extruder" msgstr "" #: Cura/util/profile.py:512 msgid "Model colour (4)" msgstr "" #: Cura/util/profile.py:512 msgid "Display color for forth extruder" msgstr "" #: Cura/util/profile.py:513 msgid "Printing window type" msgstr "" #: Cura/util/profile.py:513 msgid "Select the interface used for USB printing." msgstr "" #: Cura/util/profile.py:525 msgid "Maximum width (mm)" msgstr "" #: Cura/util/profile.py:525 Cura/util/profile.py:526 Cura/util/profile.py:527 msgid "Size of the machine in mm" msgstr "" #: Cura/util/profile.py:526 msgid "Maximum depth (mm)" msgstr "" #: Cura/util/profile.py:527 msgid "Maximum height (mm)" msgstr "" #: Cura/util/profile.py:528 msgid "Machine center 0,0" msgstr "" #: Cura/util/profile.py:528 msgid "" "Machines firmware defines the center of the bed as 0,0 instead of the front " "left corner." msgstr "" #: Cura/util/profile.py:529 msgid "Build area shape" msgstr "" #: Cura/util/profile.py:529 msgid "The shape of machine build area." msgstr "" #: Cura/util/profile.py:531 msgid "" "If you have an heated bed, this enabled heated bed settings (requires " "restart)" msgstr "" #: Cura/util/profile.py:532 msgid "GCode Flavor" msgstr "" #: Cura/util/profile.py:532 msgid "" "Flavor of generated GCode.\n" "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n" "UltiGCode is a variation of the RepRap GCode which puts more settings in the " "machine instead of the slicer.\n" "MakerBot GCode has a few changes in the way GCode is generated, but still " "requires MakerWare to generate to X3G.\n" "BFB style generates RPM based code.\n" "Mach3 uses A,B,C instead of E for extruders." msgstr "" #: Cura/util/profile.py:533 msgid "Extruder count" msgstr "" #: Cura/util/profile.py:533 msgid "Amount of extruders in your machine." msgstr "" #: Cura/util/profile.py:534 Cura/util/profile.py:536 Cura/util/profile.py:538 #: Cura/util/profile.py:540 msgid "Offset X" msgstr "" #: Cura/util/profile.py:534 Cura/util/profile.py:535 msgid "The offset of your secondary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:535 Cura/util/profile.py:537 Cura/util/profile.py:539 #: Cura/util/profile.py:541 msgid "Offset Y" msgstr "" #: Cura/util/profile.py:536 Cura/util/profile.py:537 msgid "The offset of your tertiary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:538 Cura/util/profile.py:539 Cura/util/profile.py:540 #: Cura/util/profile.py:541 msgid "The offset of your forth extruder compared to the primary." msgstr "" #: Cura/util/profile.py:542 msgid "E-Steps per 1mm filament" msgstr "" #: Cura/util/profile.py:542 msgid "" "Amount of steps per mm filament extrusion. If set to 0 then this value is " "ignored and the value in your firmware is used." msgstr "" #: Cura/util/profile.py:543 msgid "Serial port" msgstr "" #: Cura/util/profile.py:543 msgid "Serial port to use for communication with the printer" msgstr "" #: Cura/util/profile.py:545 msgid "Baudrate" msgstr "" #: Cura/util/profile.py:545 msgid "" "Speed of the serial port communication\n" "Needs to match your firmware settings\n" "Common values are 250000, 115200, 57600" msgstr "" #: Cura/util/profile.py:548 msgid "Head size towards X min (mm)" msgstr "" #: Cura/util/profile.py:548 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:549 msgid "Head size towards Y min (mm)" msgstr "" #: Cura/util/profile.py:549 Cura/util/profile.py:550 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:550 msgid "Head size towards X max (mm)" msgstr "" #: Cura/util/profile.py:551 msgid "Head size towards Y max (mm)" msgstr "" #: Cura/util/profile.py:551 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:552 msgid "Printer gantry height (mm)" msgstr "" #: Cura/util/profile.py:552 msgid "" "The height of the gantry holding up the printer head. If an object is higher " "then this then you cannot print multiple objects one for one. 60mm for an " "Ultimaker." msgstr "" #: Cura/util/profile.py:554 #, python-format msgid "More flow than 150% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:555 #, python-format msgid "Less flow than 50% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:556 #, python-format msgid "" "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and " "are not recommended." msgstr "" #: Cura/util/profile.py:558 msgid "" "It is highly unlikely that your machine can achieve a printing speed above " "150mm/s" msgstr "" #: Cura/util/profile.py:565 Cura/util/profile.py:566 Cura/util/profile.py:567 #: Cura/util/profile.py:568 Cura/util/profile.py:569 msgid "Temperatures above 260C could damage your machine, be careful!" msgstr "" #: Cura/util/profile.py:570 Cura/util/profile.py:571 Cura/util/profile.py:572 #: Cura/util/profile.py:573 Cura/util/profile.py:574 msgid "" "Are you sure your filament is that thick? Normal filament is around 3mm or " "1.75mm." msgstr "" #: Cura/util/profile.py:575 msgid "" "It is highly unlikely that your machine can achieve a travel speed above " "300mm/s" msgstr "" #: Cura/util/profile.py:576 #, python-format msgid "" "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad " "results and is not recommended." msgstr "" #: Cura/util/sliceEngine.py:93 #, python-format msgid "%d minutes" msgstr "" #: Cura/util/sliceEngine.py:95 #, python-format msgid "%d hour %d minutes" msgstr "" #: Cura/util/sliceEngine.py:96 #, python-format msgid "%d hours %d minutes" msgstr "" #: Cura/util/sliceEngine.py:101 #, python-format msgid "%0.2f meter %0.0f gram" msgstr ""