-
-udev - a userspace device manager
-
-For more information on the design, and structure of this project, see the
-files in the docs/ directory.
-
-To use:
-
-- You must be running a 2.6 version of the Linux kernel.
-
-- Your 2.6 kernel must have had CONFIG_HOTPLUG enabled when it was built.
-
-- Make sure sysfs is mounted at /sys. No other location is supported.
- You can mount it by running:
- mount -t sysfs none /sys
-
-- Make sure you integrate udev with your hotplug setup. There is a copy of
- the rules files for all major distros in the etc/udev folder. You may look
- there how others are doing it.
-
-- Make sure you integrate with the kernel hotplug events. Later versions of
- udev are able to listen directly to a netlink socket, older versions used
- udevsend to feed the udev daemon with the kernel event. The most basic
- setup to run udev is to let the kernel for the udev binary directly:
- echo "/sbin/udev" > /proc/sys/kernel/hotplug
-
- While this may work in some setups, it is not recommended to do. A recent
- kernel and udev version is able to operate with the event serializing daemon
- udevd, that makes sure, that no "remove" event will beat a "add" event for
- the same device.
-
-- Build the project:
- make
-
- Note:
- There are a number of different flags that you can use when building
- udev. They are as follows:
- prefix
- set this to the default root that you want udev to be
- installed into. This works just like the 'configure --prefix'
- script does. Default value is ''. Only override this if you
- really know what you are doing.
- USE_KLIBC
- if set to 'true', udev is built and linked against the
- included version of klibc. Default value is 'false'.
- USE_LOG
- if set to 'true', udev will emit messages to the syslog when
- it creates or removes device nodes. This is helpful to see
- what udev is doing. This is enabled by default. Note, if you
- are building udev against klibc it is recommended that you
- disable this option (due to klibc's syslog implementation.)
- USE_SELINUX
- if set to 'true', udev will be built with SELinux support
- enabled. This is disabled by default.
- DEBUG
- if set to 'true', debugging messages will be sent to the syslog
- as udev is run. Default value is 'false'.
- KERNEL_DIR
- If this is not set it will default to /lib/modules/`uname -r`/build
- This is used if USE_KLIBC=true to find the kernel include
- directory that klibc needs to build against. This must be set
- if you are not building udev while running a 2.6 kernel.
-
- So, if you want to build udev using klibc with debugging messages, you
- would do:
- make USE_KLIBC=true DEBUG=true
-
- udev will follow the setting of the debug level in udev.conf. Adapt this
- value to see the debug in syslog.
-
-- Install the project:
- make install
-
- This will put the udev binaries in /sbin, create the and /etc/udev
- directories, and place the udev configuration files in /etc/udev/. You
- will probably want to edit the *.rules files to create custom naming
- rules. More info on how the config files are set up are contained in
- comments in the files, and is located in the documentation.
-
-- Add and remove devices from the system and marvel as nodes are created
- and removed in /dev based on the device types.
-
-- If you later get sick of it, uninstall it:
- make uninstall
-
-If nothing seems to happen, make sure your build worked properly by
-running the udev-test.pl script as root in the test/ subdirectory of the
-udev source tree.
-
-Development and documentation help is very much appreciated, see the TODO
-file for a list of things left to be done.
-
-Any comment/questions/concerns please let me and the other udev developers
-know by sending a message to the linux-hotplug-devel mailing list at:
- linux-hotplug-devel@lists.sourceforge.net
-
-greg k-h
-greg@kroah.com
-
+systemd System and Service Manager
+
+DETAILS:
+ http://0pointer.de/blog/projects/systemd.html
+
+WEB SITE:
+ http://www.freedesktop.org/wiki/Software/systemd
+
+GIT:
+ git://anongit.freedesktop.org/systemd/systemd
+ ssh://git.freedesktop.org/git/systemd/systemd
+
+GITWEB:
+ http://cgit.freedesktop.org/systemd/systemd
+
+MAILING LIST:
+ http://lists.freedesktop.org/mailman/listinfo/systemd-devel
+ http://lists.freedesktop.org/mailman/listinfo/systemd-commits
+
+IRC:
+ #systemd on irc.freenode.org
+
+BUG REPORTS:
+ https://bugs.freedesktop.org/enter_bug.cgi?product=systemd
+
+AUTHOR:
+ Lennart Poettering
+ Kay Sievers
+ ...and many others
+
+LICENSE:
+ LGPLv2.1+ for all code
+ - except sd-daemon.[ch] and sd-readahead.[ch] which are MIT
+ - except src/udev/ which is GPLv2.0+
+
+REQUIREMENTS:
+ Linux kernel >= 2.6.39
+ with devtmpfs
+ with cgroups (but it's OK to disable all controllers)
+ optional but strongly recommended: autofs4, ipv6
+ dbus >= 1.4.0
+ libcap
+ PAM >= 1.1.2 (optional)
+ libcryptsetup (optional)
+ libgcrypt (optional)
+ libaudit (optional)
+ libacl (optional)
+ libselinux (optional)
+ liblzma (optional)
+ tcpwrappers (optional)
+ libgcrypt (optional)
+ libqrencode (optional)
+ libmicrohttpd (optional)
+
+ When you build from git you need the following additional dependencies:
+
+ docbook-xsl
+ xsltproc
+ automake
+ autoconf
+ libtool
+ intltool
+ gperf
+ gtkdocize (optional)
+ python (optional)
+ make, gcc, and similar tools
+
+ During runtime you need the following dependencies:
+
+ util-linux > v2.18 (requires fsck -l, agetty -s)
+ sulogin (from sysvinit-tools, optional but recommended)
+ dracut (optional)
+
+ When systemd-hostnamed is used it is strongly recommended to
+ install nss-myhostname to ensure that in a world of
+ dynamically changing hostnames the hostname stays resolveable
+ under all circumstances. In fact, systemd-hostnamed will warn
+ if nss-myhostname is not installed. Packagers are encouraged to
+ add a dependency on nss-myhostname to the package that
+ includes systemd-hostnamed.
+
+ Note that D-Bus can link against libsystemd-login.so, which
+ results in a cyclic build dependency. To accommodate for this
+ please build D-Bus without systemd first, then build systemd,
+ then rebuild D-Bus with systemd support.
+
+WARNINGS:
+ systemd will warn you during boot if /etc/mtab is not a
+ symlink to /proc/mounts. Please ensure that /etc/mtab is a
+ proper symlink.
+
+ systemd will warn you during boot if /usr is on a different
+ file system than /. While in systemd itself very little will
+ break if /usr is on a separate partition many of its
+ dependencies very likely will break sooner or later in one
+ form or another. For example udev rules tend to refer to
+ binaries in /usr, binaries that link to libraries in /usr or
+ binaries that refer to data files in /usr. Since these
+ breakages are not always directly visible systemd will warn
+ about this, since this kind of file system setup is not really
+ supported anymore by the basic set of Linux OS components.
+
+ For more information on this issue consult
+ http://freedesktop.org/wiki/Software/systemd/separate-usr-is-broken
+
+ENGINEERING AND CONSULTING SERVICES:
+ ProFUSION <http://profusion.mobi> offers professional
+ engineering and consulting services for systemd for embedded
+ and other use. Please contact Gustavo Barbieri
+ <barbieri@profusion.mobi> for more information.
+
+ Disclaimer: This notice is not a recommendation or official
+ endorsement. However, ProFUSION's upstream work has been very
+ beneficial for the systemd project.