chiark / gitweb /
Support uniform audio command backend from disorder-playrtp. A useful
[disorder] / doc / disorder-playrtp.1.in
index 16d128a5c6036990f1825c670b3366bf427f3e8e..ea4c93fe408f775e6487cd15e8a44aab19ffcb94 100644 (file)
 .\"
-.\" Copyright (C) 2007 Richard Kettlewell
+.\" Copyright (C) 2007-2009 Richard Kettlewell
 .\"
-.\" This program is free software; you can redistribute it and/or modify
+.\" This program is free software: you can redistribute it and/or modify
 .\" it under the terms of the GNU General Public License as published by
-.\" the Free Software Foundation; either version 2 of the License, or
+.\" the Free Software Foundation, either version 3 of the License, or
 .\" (at your option) any later version.
-.\"
-.\" This program is distributed in the hope that it will be useful, but
-.\" WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-.\" General Public License for more details.
-.\"
+.\" 
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.\" GNU General Public License for more details.
+.\" 
 .\" You should have received a copy of the GNU General Public License
-.\" along with this program; if not, write to the Free Software
-.\" Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-.\" USA
+.\" along with this program.  If not, see <http://www.gnu.org/licenses/>.
 .\"
 .TH disorder-playrtp 1
 .SH NAME
 disorder-playrtp \- play DisOrder network broadcasts
 .SH SYNOPSIS
-.B disorder-playrtp
+.B disorder\-playrtp
 .RI [ OPTIONS ]
-.RB [ -- ]
-.RI [[ GROUP ]
+.RB [ \-\- ]
+.RI [[ ADDRESS ]
 .IR PORT ]
 .SH DESCRIPTION
-\fBdisorder-playrtp\fR plays a network broadcast sent from the specified
+\fBdisorder\-playrtp\fR plays a network broadcast sent from the specified
 address.
 .PP
-If neither a group nor port are specified then the local DisOrder
+If neither an address nor port are specified then the local DisOrder
 configuration is consulted to find the server and the server is asked where the
 RTP stream is.
 .PP
 If just a port is specified then the RTP stream is assumed to be unicast or
 broadcast to that port.
 .PP
-If a group and a port are specified then the RTP stream is assumed to be
-multicast to that group and port.
+If an address and a port are specified then the RTP stream is assumed to be
+multicast to that group address and port.
 .SH OPTIONS
 The default sound API is the first of the ones listed below that are available.
 Usually this implies ALSA under Linux and Core Audio under OS X.
 .TP
-.B --alsa\fR, \fB-a
+.B \-\-alsa\fR, \fB\-a
 Use ALSA to play sound.
+Only available on Linux.
 .TP
-.B --oss\fR, \fB-o
+.B \-\-oss\fR, \fB\-o
 Use OSS to play sound.
+Only available on Linux and FreeBSD.
 .TP
-.B --core-audio\fR, \fB-c
+.B \-\-core\-audio\fR, \fB\-c
 Use Core Audio to play sound.
+Only available on Macs.
 .TP
-.B --device \fIDEVICE\fR, \fB-D \fIDEVICE\fR
+.B \-\-device \fIDEVICE\fR, \fB\-D \fIDEVICE\fR
 Specifies the audio device to use.
-The exact meaning of this is platform-dependent; on Linux it is the
-ALSA device name.
+See
+.B "DEVICE NAMES"
+below for more information.
 .TP
-.B --config \fIPATH\fR, \fB-C \fIPATH
+.B \-\-command \fICOMMAND\fR, \fB-e \fICOMMAND\fR
+Instead of sending to a physical audio device, invoke \fICOMMAND\fR using the
+shell and write audio samples to its standard input.
+Currently the input will be 44100KHz 16-bit signed stereo samples.
+If \fICOMMAND\fR exits it is re-executed; any samples that had been written to
+the pipe but not processed by the previous instance will be lost.
+.IP
+.B \-\-device
+is redundant with this option.
+.IP
+As an example,
+.B "-e \(aqcat > dump\(aq"
+would log audio data to a file for later processing.
+You could convert it to another format with, for instance:
+.IP
+.B "sox -c2 -traw -r44100 -s -w dump dump.wav"
+.TP
+.B \-\-config \fIPATH\fR, \fB\-C \fIPATH
 Set the configuration file.
 The default is
 .IR pkgconfdir/config .
 .TP
-.B --socket \fIPATH\fR, \fB-s \fIPATH
+.B \-\-socket \fIPATH\fR, \fB\-s \fIPATH
 Set the control socket.
 Normally this would not be used manually.
 .TP
-.B --help\fR, \fB-h
+.B \-\-help\fR, \fB\-h
 Display a usage message.
 .TP
-.B --version\fR, \fB-V
+.B \-\-version\fR, \fB\-V
 Display version number.
 .SS "Buffer Control Options"
 You shouldn't need to use these options.
 .TP
-.B --min \fIFRAMES\fR, \fB-m \fIFRAMES\fR
+.B \-\-min \fIFRAMES\fR, \fB\-m \fIFRAMES\fR
 Specifies the buffer low watermark in frames.
 If the number of frames falls below this value then playing will be
 stopped until the buffer fills up.
 .TP
-.B --buffer \fIFRAMES\fR, \fB-b \fIFRAMES\fR
+.B \-\-buffer \fIFRAMES\fR, \fB\-b \fIFRAMES\fR
 Specifies the buffer high watermark in frames.
 Once there are this many frames in the buffer, playing will be (re-)started.
 .TP
-.B --max \fIFRAMES\fR, \fB-x \fIFRAMES\fR
+.B \-\-max \fIFRAMES\fR, \fB\-x \fIFRAMES\fR
 Specifies the maximum buffer size in frames.
 If there are this many frames in the buffer then reading from the
 network socket will be suspended.
-The default is four times the \fB--buffer\fR value.
+The default is four times the \fB\-\-buffer\fR value.
 .TP
-.B --rcvbuf \fIBYTES\fR, \fB-R \fIBYTES\fR
+.B \-\-rcvbuf \fIBYTES\fR, \fB\-R \fIBYTES\fR
 Specifies socket receive buffer size.
 The default is 131072 (128Kbytes).
 The buffer size will not be reduced below the operating system's default.
 .SH "REMOTE CONTROL"
 The
-.B --socket
+.B \-\-socket
 option is used by Disobedience to control a background
-.B disorder-playrtp
+.B disorder\-playrtp
 daemon.
 The socket will be created as a UNIX domain stream socket.
 When a connection is received a single line is read from it.
@@ -104,7 +123,7 @@ The following commands are known:
 .TP
 .B stop
 Causes
-.B disorder-playrtp
+.B disorder\-playrtp
 to terminate.
 .TP
 .B query
@@ -115,6 +134,16 @@ After the first command the connection is closed.
 Only one connection at a time will be serviced.
 .PP
 This protocol is not guaranteed to be stable.
+.SH "DEVICE NAMES"
+.SS "Core Audio"
+On a Mac, the device name can either be the human-readable name of the desired
+output or its UID.
+To get a list of the human-readable names, visit System Preferences -> Sound;
+the Type column has the name you want.
+.PP
+For example, you might use "Built-in Output" for the built-in speaker
+or "Built-in Line Output" if you have connected external speakers.
+Remember to quote the name.
 .SH "SEE ALSO"
 .BR disobedience (1),
 .BR disorder_config (5),