From: ian <ian>
Date: Sun, 3 Oct 2004 16:06:20 +0000 (+0000)
Subject: cut out redundant junk
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ijackson/git?a=commitdiff_plain;h=8c315229712382ff1c2077476dcf94ee4f1d76e0;p=trains.git

cut out redundant junk
---

diff --git a/pcb/Makefile b/pcb/Makefile
index d6b297d..c23515f 100644
--- a/pcb/Makefile
+++ b/pcb/Makefile
@@ -1,34 +1,10 @@
 
-M4INCS=		parts.i4
+default:	netlists
 
-E_TRACK=	ArsCLMNo
-LAYOUTOPTS_ALL=	-ep=*Cm
-LAYOUTOPTS=	-E=*$(E_TRACK) $(LAYOUTOPTS_ALL)
-LAYOUTOPTS_PHYS= -S1.0 $(LAYOUTOPTS) '-e*A'
-XLAYOUTOPTS_LAYER= -e'=5AN' -E'*~=5rsm' -e'p~=5r' -e'*~=9C' -e'*=*l'
-
-LAYERS_LS=	0 10 20
-LAYERS_PS=	$(addsuffix .ps, $(LAYERS_LS))
-LAYERS_L=	$(addprefix ours-l, $(LAYERS_PS))
-LAYERS_E=	$(addprefix ours-e, $(LAYERS_PS))
-LAYERS=		$(LAYERS_L) $(LAYERS_E)
-
-LPAGES=	 $(foreach x, 0 1 2 3 4 5 6, $(foreach y, 1 2 3 4 5, ours-p0-$xx$y.ps))
-
-default:	netlists picprogs
-layers:		$(LAYERS)
-lpages:		$(LPAGES)
-
-all:		default layers bulkres.bom divider-tables \
-		picprogs netlists panel3.pcb
+all:		default layers panel3.pcb
 
 o=>$@.new && mv -f $@.new $@
 
-CIRCUITPARTS=	control.partlist circuit.partlist
-BULKRESPARTS=	bulkres-select.partlist bulkres-items.partlist
-
-picprogs:	flasher.hex
-
 netlists:	reversers.net detectors.net \
 		reversers.hole-rep detectors.hole-rep \
 		both.hole-rep panel3.hole-rep
@@ -121,70 +97,9 @@ pcboprints:	reversers.oprints-l detectors.oprints-l
 %.net-spec:	generate-netspec.pl
 		./$< $@ $o
 
-%.hex:		%.asm
-		gpasm -p 18f458 $<
-
-circuit.bom:	farnell-find $(CIRCUITPARTS)
-		./farnell-find bom $(CIRCUITPARTS) $o
-
-bulkres.bom:	farnell-find $(BULKRESPARTS)
-		./farnell-find bom $(BULKRESPARTS) $o
-
-bulkres-select.partlist:	bulkres-select-gen.pl
-		./$^ $o
-
-bulkres-items.suggest:
-		cat bulkres-searchout*[0-9] | ./farnell-resistor-convert.pl $o
-
-bulkres-items.descs:	bulkres-items.suggest
-		xargs ./farnell-find describe <$< $o
-
-bulkres-items.partlist:
-		./farnell-resistor-convert.pl <bulkres-items.descs MRS25 std $o
-
-divider-table.txt:	divider-table.pl
-		./$< $o
-
-divider-tables:		divider-table.ps divider-table.txt
-
-divider-table.ps:	divider-table.txt Makefile
-		a2ps -o- -R -1 --borders no -B -L"$$(wc -l <$<)" -l158 \
-		 --center-title='E24 resistor ratios and logarithms' <$< $o
-
-%.d4:		%.m4 $(M4INCS) Makefile
-		m4 -s <$< $o
-
-%-a.ps:		%.d4 layout
-		./layout <$< $(LAYOUTOPTS) '-E*l' $o
-
-%-al.ps:	%.d4 layout
-		./layout <$< $(LAYOUTOPTS) '-e*C' '-ep=rm' $o
-
-%-ap.ps:	%.d4 layout
-		./layout -S1.0 <$< $(LAYOUTOPTS) '-e*A' '-ep=rm' $o
-
-ours-l%.ps:	ours.d4 layout
-		./layout <$< -l$* $(LAYOUTOPTS) $(XLAYOUTOPTS_LAYER) $o
-
-ours-e%.ps:	ours.d4 layout
-		./layout <$< -l$* -E'=*aRsclMno' \
-			-e'p=*rm' -e'=5RN' -E'*~=5rsm' -e'p~=5r' -e'*=*l' $o
-
-ours-p%.ps:	ours.d4 layout
-		./layout <$< -l$$(printf %s "$*" | sed -e 's/-/ -P/') \
-			$(LAYOUTOPTS_PHYS) $(XLAYOUTOPTS_LAYER) $o
-
-parts.ps:	showlib.d4 layout
-		./layout <$< $(LAYOUTOPTS_ALL) $o
-
 clean:
-		-rm -f -- *.d4 farn.* *~ *.new
-		-rm -f bulkres-*.partlist bulkres-items.suggest *.bom
-		-rm -f t,*.gnuplot-data t,*.gnuplot-cmd t,gnuplot-fifo
-		-rm -f t,gnuplots.sh reversers.net reversers.net-info
-		-rm -f flasher.hex flasher.cod flasher.lst
-		-rm -f ours-*.ps parts.ps
-		-rm -f *.oprint-*.ps
+		-rm -f -- *~ *.new
+		-rm -f reversers.net reversers.net-info
 
 .PRECIOUS:	%.net-info %.net-spec
 .PRECIOUS:	$(OPRINTS)