From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Sun, 29 Jul 2012 19:11:53 +0000 (+0100)
Subject: some more notes
X-Git-Tag: iwj-success-2012-07-29~2
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=185ea937298de0f264fa697a469870148046e0fd;ds=inline

some more notes
---

diff --git a/INSTRUCTIONS b/INSTRUCTIONS
index 9c69b03..bfc6763 100644
--- a/INSTRUCTIONS
+++ b/INSTRUCTIONS
@@ -20,3 +20,22 @@ To print:
  * Watch while it starts and make sure that the skirt sticks to
    printbed and nothing gets tangled
  * Check that filament feed path from feedstock coil looks good.
+
+------------------------------------------------------------
+
+openscad - use wheezy
+Slic3r - is from slic3r-linux-x86-0-8-4.tar.gz
+
+------------------------------------------------------------
+
+firmware upgrade:
+
+ firmware is in marlin.git#iwj and works with make
+   various other firmwares for comparison only
+    sprinter-reprappro.git sprinter.git
+ produces Marlin.hex
+ depends on stuff in arduino-0022 (doesn't work with other arduino
+   versions, incompatible)
+ program with
+   avrdude -b 38400 -v -P /dev/ttyUSB0 -p atmega644P -c arduino -U flash:w:Marlin.hex
+ needs the reset jumper (which is right next to the mcu) fitted