X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=filamentspool.scad;h=ab7ab60eedaa9c3d1458850852191a1a9e7804b0;hp=b514351879a87947376794fa2f432953d0f03ed6;hb=4c856b3688e86c7e08bc471b4fe3be4e857e5220;hpb=b7d6409819396d669ed049b836db07fdc9529f75

diff --git a/filamentspool.scad b/filamentspool.scad
index b514351..ab7ab60 100644
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -5,6 +5,14 @@ fdia=1.75;
 slop=0.5;
 bigslop=slop*2;
 
+hubeffrad = 30 + 55;
+hubbigrad = 20;
+hublwidth = 3;
+hubstemwidth = 2;
+hublthick = 10;
+hubaxlelen = 25;
+hubaxlerad = 5;
+
 prongthick=5;
 prongwidth=5;
 ratchetstep=15;
@@ -32,13 +40,13 @@ overclipdepth=15;
 overcliproundr=2.0;
 overclipthick=0.5;
 
+overclipsmaller=-2.5;
+overclipbigger=0.0;
+
 wingspoke=3;
 wingsize=6;
 wingthick=3;
 
-overclipsmaller=-1.0;
-overclipbigger=2.0;
-
 armendwallthick=2.5;
 armendbasethick=1.2;
 
@@ -77,7 +85,7 @@ module ArmEnd(length=120){
 			[	0,	0,	1,	0	],
 			[	0,	0,	0,	1	]])
 	cube([ratchettooth - ratchettoothsmoothr*2,
-	      channelwidth, ratchettoothheight]);
+	      channelwidth, ratchettoothheight - ratchettoothsmoothr]);
     }
   }
 }
@@ -169,7 +177,7 @@ module CupSecuringClip(){
 	cube([wingswidth, wingsize, wingthick]);
     }
     translate([0,0,-0.1])
-      CupSecuringClipSolidSmooth(xrad=0, xdepth=5);
+      CupSecuringClipSolidSmooth(xrad=0, xdepth=0.2);
   }
 }
 
@@ -177,6 +185,41 @@ module ArmDoveClipPin(){
   DoveClipPin(h=doveclipheight);
 }
 
+module Hub(){
+  difference(){
+    cylinder(h=hublthick, r=hubbigrad);
+    translate([0,0,-1]) cylinder(h=hublthick+2, r=(hubbigrad-hublwidth));
+  }
+  axlerad = hubaxlerad + bigslop;
+  difference(){
+    cylinder(h=hubaxlelen, r=axlerad+hublwidth);
+    translate([0,0,-1]) cylinder(h=hubaxlelen+2, r=axlerad);
+  }
+  hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
+  holewidth = DoveClip_width() - hubstemwidth*2;
+  for (ang=[0,120,240])
+    rotate([0,0,ang]) {
+      difference() {
+	translate([hubeffrad,0,0])
+	  DoveClipPairSane(h=doveclipheight,
+			   baseextend = (hubeffrad - DoveClip_depth()
+					 - hubbigrad + hublwidth));
+	if (hole>hublwidth && holewidth > 2) {
+	  translate([hubbigrad + hublwidth, -holewidth/2, -1])
+	    cube([hole, holewidth, hublthick+2]);
+	}
+      }
+    }
+  xmin = axlerad+hublwidth/2;
+  xmax = hubbigrad-hublwidth/2;
+  for (ang = [0 : 60 : 359])
+    rotate([0,0,ang]) rotate([90,0,0]) {
+      translate([0,0,-hublwidth/2])
+	linear_extrude(height=hublwidth)
+	polygon([[xmin,0], [xmax,0], [xmax,hublthick], [xmin,hubaxlelen]]);
+    }
+}
+
 //ArmEnd();
 //FilamentCup();
 //CupSecuringClip();