X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=filamentspool.scad;h=487d853b0645b524d5d6ca1f7dc8a0f8aa016b39;hp=7c2434e32b4ed5b369ff559810c9f9570880b1fd;hb=fcd425d28e0fd254673250e4c5d13db7b98aab48;hpb=c41ff015f10346f1b8404e83e39f5b58ec762bd2

diff --git a/filamentspool.scad b/filamentspool.scad
index 7c2434e..487d853 100644
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -1,5 +1,17 @@
+// -*- C -*-
+
+fdia=1.75;
 
 slop=0.5;
+bigslop=slop*2;
+
+hubeffrad = 30; // + 55;
+hubbigrad = 20;
+hublwidth = 3;
+hubstemwidth = 2;
+hublthick = 10;
+hubaxlelen = 25;
+hubaxlerad = 5;
 
 prongthick=5;
 prongwidth=5;
@@ -9,30 +21,62 @@ ratchettoothheight=5;
 ratchettoothsmoothr=1;
 ratchettoothslope=0.75;
 overlap=0.5;
+cupbigrad=20;
+
+xstraightmul = 1.75;
+
+propxshift = 0;
+
+doveclipheight = 10;
+
+teethh=3;
+teethgapx=4+fdia;
+
+prongstalkxwidth=3;
+
+stalklength=35;
+overclipcupgap=5;
+overclipdepth=15;
+overcliproundr=2.0;
+overclipthick=0.5;
+
+overclipsmaller=-2.5;
+overclipbigger=0.0;
+
+wingspoke=3;
+wingsize=6;
+wingthick=3;
 
 armendwallthick=2.5;
 armendbasethick=1.2;
 
+ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
+
 include <doveclip.scad>
+include <cliphook.scad>
+include <filamentteeth.scad>
 
-module ArmEnd(length=120){
-  channelwidth = prongthick + slop;
-  channeldepth = prongwidth + ratchettoothheight;
-  totalwidth = armendwallthick*2 + channelwidth;
-  totalheight = channeldepth + armendbasethick;
+channelwidth = prongthick + slop;
+channeldepth = prongwidth + ratchettoothheight;
+totalwidth = armendwallthick*2 + channelwidth;
+totalheight = channeldepth + armendbasethick;
+stalkwidth = prongwidth + prongstalkxwidth;
 
+module ArmEnd(length=120){ ////toplevel
   translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
     rotate([0,0,-90])
-      DoveClipPairBase(h=totalheight);
+      DoveClipPairBase(h=doveclipheight);
   }
 
-  for (dx = [0 : ratchetstep : length]) translate([dx,0,0]) {
-    difference(){
-      translate([0, -armendwallthick, -armendbasethick])
-	cube([ratchetstep+overlap, totalwidth, totalheight]);
-      translate([-1, 0, 0])
-	cube([ratchetstep+overlap+2, channelwidth, channeldepth+1]);
-    }
+  difference(){
+    translate([0, -armendwallthick, -armendbasethick])
+      cube([length, totalwidth, totalheight]);
+    translate([-1, 0, 0])
+      cube([length+1 - ratchettooth, channelwidth, channeldepth+1]);
+    translate([-1, 0, ratchettoothheight])
+      cube([length+2, channelwidth, channeldepth+1]);
+  }
+  for (dx = [0 : ratchetstep : length - ratchetstep]) translate([dx,0,0]) {
     translate([ratchettoothsmoothr+0.5, armendwallthick/2, 0]) minkowski(){
       rotate([90,0,0])
 	cylinder($fn=20, r=ratchettoothsmoothr, h=armendwallthick);
@@ -41,9 +85,144 @@ module ArmEnd(length=120){
 			[	0,	0,	1,	0	],
 			[	0,	0,	0,	1	]])
 	cube([ratchettooth - ratchettoothsmoothr*2,
-	      channelwidth, ratchettoothheight]);
+	      channelwidth, ratchettoothheight - ratchettoothsmoothr]);
+    }
+  }
+}
+
+module FilamentCupHandle(){
+  pawlusewidth = ratchetpawl-ratchettoothsmoothr*2;
+  mirror([0,1,0]) {
+    cube([stalklength, stalkwidth, prongthick]);
+    translate([stalklength, stalkwidth/2, 0])
+      cylinder(r=stalkwidth/2, h=prongthick, $fn=20);
+    translate([ratchettoothsmoothr, stalkwidth, 0]) {
+      minkowski(){
+	cylinder($fn=20,r=ratchettoothsmoothr, h=1);
+	multmatrix([	[	1, -ratchettoothslope, 0, 0	],
+			[	0,	1,	0,	0	],
+			[	0,	0,	1,	0	],
+			[	0,	0,	0,	1	]])
+	  cube([pawlusewidth,
+		ratchettoothheight - ratchettoothsmoothr,
+		prongthick - 1]);
+      }
+    }
+  }
+}
+
+module FilamentCupCup(){
+  xstraight = cupbigrad * xstraightmul;
+  linear_extrude(height=prongthick) {
+    FlatArc(0,0, cupbigrad,cupbigrad+prongwidth, 89,271, $fn=80);
+  }
+  for (my=[0,1]) mirror([0,my,0]) {
+    translate([0,cupbigrad,0])
+      cube([xstraight, prongwidth, prongthick]);
+  }
+}
+
+module FilamentCup() { ////toplevel
+  FilamentCupHandle();
+
+  dx = cupbigrad + prongwidth;
+  gapy = prongwidth;
+  dy = cupbigrad + gapy + overclipcupgap;
+
+  translate([dx, dy, 0])
+    FilamentCupCup();
+  translate([0, -1, 0]);
+  cube([prongwidth, dy+1, prongthick]);
+
+  midrad = cupbigrad + prongwidth/2;
+
+  propshift = stalklength - overclipdepth - prongthick + propxshift;
+  proptaken = propshift;
+  echo(cupbigrad, dx, midrad, propshift, proptaken);
+
+  translate([propshift, -1, 0]) {
+    // something is wrong with the y calculation
+    cube([prongwidth,
+	  dy - sqrt(midrad*midrad - proptaken*proptaken) - prongwidth/2,
+	  prongthick]);
+  }
+  translate([0, overclipcupgap, 0])
+    rotate([0,0, 102 + fdia])
+    FilamentTeeth(fdia=fdia, h=teethh);
+}
+
+module CupSecuringClipSolid(w,d,h1,h2){
+  rotate([0,-90,0]) translate([0,-h1/2,-w/2]) linear_extrude(height=w) {
+    polygon(points=[[0,0], [d,0], [d,h2], [0,h1]]);
+  }
+}
+
+module CupSecuringClipSolidSmooth(xrad=0, xdepth=0){
+  hbase = totalheight + prongstalkxwidth - overcliproundr*2;
+  minkowski(){
+    CupSecuringClipSolid(w=totalwidth,
+			 d=overclipdepth + xdepth,
+			 h1=hbase - overclipsmaller,
+			 h2=hbase + overclipbigger);
+    cylinder($fn=20, h=0.01, r=overcliproundr+xrad);
+  }
+}
+
+module CupSecuringClip(){ ////toplevel
+  wingswidth = wingspoke*2 + overclipthick*2 + overcliproundr*2 + totalwidth;
+  difference(){
+    union(){
+      CupSecuringClipSolidSmooth(xrad=overclipthick, xdepth=0);
+      translate([-wingswidth/2, -wingsize/2, 0])
+	cube([wingswidth, wingsize, wingthick]);
     }
+    translate([0,0,-0.1])
+      CupSecuringClipSolidSmooth(xrad=0, xdepth=0.2);
+  }
+}
+
+module ArmDoveClipPin(){ ////toplevel
+  DoveClipPin(h=doveclipheight);
+}
+
+module Hub(){ ////toplevel
+  difference(){
+    cylinder($fn=60, h=hublthick, r=hubbigrad);
+    translate([0,0,-1])
+      cylinder($fn=30, h=hublthick+2, r=(hubbigrad-hublwidth));
   }
+  axlerad = hubaxlerad + slop;
+  difference(){
+    cylinder(h=hubaxlelen, r=axlerad+hublwidth);
+    translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
+  }
+  hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
+  holewidth = DoveClip_width() - hubstemwidth*2;
+  for (ang=[0,120,240])
+    rotate([0,0,ang]) {
+      difference() {
+	translate([hubeffrad,0,0])
+	  DoveClipPairSane(h=doveclipheight,
+			   baseextend = (hubeffrad - DoveClip_depth()
+					 - hubbigrad + hublwidth));
+	if (hole>hublwidth && holewidth > 2) {
+	  translate([hubbigrad + hublwidth, -holewidth/2, -1])
+	    cube([hole, holewidth, hublthick+2]);
+	}
+      }
+    }
+  xmin = axlerad+hublwidth/2;
+  xmax = hubbigrad-hublwidth/2;
+  for (ang = [0 : 60 : 359])
+    rotate([0,0,ang]) rotate([90,0,0]) {
+      translate([0,0,-hublwidth/2])
+	linear_extrude(height=hublwidth)
+	polygon([[xmin,0.05], [xmax,0.05],
+		 [xmax,hublthick-0.2], [xmin, hubaxlelen-0.2]]);
+    }
 }
 
-ArmEnd();
+//ArmEnd();
+//FilamentCup();
+//CupSecuringClip();
+//Hub();