X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=INSTRUCTIONS;h=9b6aff005499986e9a6c9085811e337d787e97bc;hp=bfb651542a7ace8c6c6f643538840f9d5bcf1ba3;hb=6f2050515372cea549e0a9f15e7078312774feb4;hpb=fddb76eac9ae8c382a134ded52ce6ef6b055060c

diff --git a/INSTRUCTIONS b/INSTRUCTIONS
index bfb6515..9b6aff0 100644
--- a/INSTRUCTIONS
+++ b/INSTRUCTIONS
@@ -4,7 +4,8 @@ To print:
  * Start pronterface
      cd /home/reprap/reprappro-software.git/
      ./pronterface.py 
- * Select "connect", wait for printer to connect
+ * Select "connect" (make sure it's ttyUSB0 115200),
+   wait for printer to connect
  * Turn on the hotend and bed heaters
  * "Load file", select the .stl file.  It will be sliced.
  * "Load file", select the _export.gcode file.  It will show up on the RHS.
@@ -28,6 +29,8 @@ To print:
 openscad - use wheezy
 Slic3r - is from slic3r-linux-x86-0-8-4.tar.gz
 
+repsnapper - only used this so far for its gcode viewer
+
 ------------------------------------------------------------
 
 firmware upgrade: