size-test: calib-fit.gcode as uses as a basis

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index e16204935c8d082ae5a0b60256a5c72118d20b04..b45661c03fadfc9f503786364c8fcd2c97fd9e59 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,6 +1,7 @@
+# generated by Slic3r 0.9.1 on Sat Aug 11 00:02:11 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 70
+bed_temperature = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -12,29 +13,32 @@ duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
+extruder_offset = 0x0
 extrusion_axis = E
 extrusion_multiplier = 1
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
-filament_diameter = 1.8
+filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
-first_layer_bed_temperature = 80
-first_layer_extrusion_width = 0
-first_layer_height = 100%
+first_layer_bed_temperature = 65
+first_layer_extrusion_width = 150%
+first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 190
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
 infill_acceleration = 50
 infill_every_layers = 1
+infill_extruder = 1
 infill_extrusion_width = 0
 infill_speed = 60
 layer_gcode = 
@@ -43,19 +47,20 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.59
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 100%
 perimeter_speed = 30
 perimeters = 3
-perimeters_extrusion_width = 0
 post_process = 
 print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
 retract_lift = 0.1
-retract_restart_extra = 0.1
+retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
@@ -70,13 +75,14 @@ solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-support_material_tool = 0
-temperature = 190
+temperature = 210
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
-z_offset = 0.0
+z_offset = 0