slic3r: wip better config, nozzle dia, etc.

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index a753dd63d4172d82ef47f7071935bff07f25875d..96c3bbf02216a79d03bb0d12fb1b9bb5ac7e3ec4 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Fri Aug 10 20:20:22 2012
+# generated by Slic3r 0.9.1 on Fri Aug 10 23:07:52 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -12,7 +12,7 @@ disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
 external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -29,7 +29,7 @@ fill_density = 0.4
 fill_pattern = rectilinear
 first_layer_bed_temperature = 65
 first_layer_extrusion_width = 200%
-first_layer_height = 0.5
+first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 195
 g0 = 0
@@ -47,7 +47,7 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.58
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -58,15 +58,15 @@ post_process =
 print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
-retract_length = 1
-retract_lift = 0
+retract_length = 4.5
+retract_lift = 0.1
 retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 6
+skirt_distance = 12
 skirt_height = 1
-skirts = 1
+skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
@@ -81,7 +81,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
 temperature = 190
-threads = 2
+threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0