config, calib-fit: 1 perimiter only

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 96c3bbf02216a79d03bb0d12fb1b9bb5ac7e3ec4..5f30c0e46083cde5df3031602de18ab677bdb739 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Fri Aug 10 23:07:52 2012
+# generated by Slic3r 0.9.1 on Sun Aug 12 22:17:48 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -28,10 +28,10 @@ fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
 first_layer_bed_temperature = 65
-first_layer_extrusion_width = 200%
+first_layer_extrusion_width = 150%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 195
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
@@ -47,13 +47,13 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.58
+nozzle_diameter = 0.59
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 3
+perimeters = 1
 post_process = 
 print_center = 70,70
 randomize_start = 1
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 190
+temperature = 210
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130