go back to slic3r since skeinforge still unconvincing

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index b45661c03fadfc9f503786364c8fcd2c97fd9e59..2488e9ae8a944dd9cabbaf7582aee6c2e0381a78 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Sat Aug 11 00:02:11 2012
+# generated by Slic3r 0.9.1 on Sun Aug 12 23:02:53 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -12,7 +12,7 @@ disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
 external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -47,13 +47,13 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.59
+nozzle_diameter = 0.50
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 3
+perimeters = 1
 post_process = 
 print_center = 70,70
 randomize_start = 1