size-test: test objects

[reprap-play.git] / size-tests.m-g

diff --git a/size-tests.m-g b/size-tests.m-g
index 68c517c57227b94b96082553ca79e08d8ad5f92d..126832faf39c4aab3d527496d36ae0f4b99597d6 100644 (file)
--- a/size-tests.m-g
+++ b/size-tests.m-g
@@ -26,9 +26,91 @@ M82 ; use absolute distances for extrusion
 
 !zprint=0.4
 
-!draw 10,10 100,10 102,12 102,14 100,16 10,16
+; "skirt" - prep extruder
+!draw 5,5 100,5 101,6 101,7 100,8 5,8
+
+; edge ticks for global motions sizing
+!draw 20,10 10,10 10,20
+!draw 10,65 10,75
+!draw 10,120 10,130 20,130
+!draw 65,130 75,130
+!draw 120,130 130,130 130,120
+!draw 130,75 130,65
+!draw 130,20 130,10 120,10
+!draw 75,10 65,10
+
+!outer_square(){
+ !draw @0.000,@0.000 @5.000,@0.000 @5.000,@5.000 @0.000,@5.000 @0.000,@0.000
+!}
+!inner_square(){
+ !draw @0.500,@0.500 @4.500,@0.500 @4.500,@4.500 @0.500,@4.500 @0.500,@0.500
+!}
+!outer_vlines(){
+ !draw @0.000,@0.000 @0.000,@5.000
+ !draw @5.000,@0.000 @5.000,@5.000
+!}
+!inner_vlines(){
+ !draw @0.500,@0.500 @0.500,@4.500
+ !draw @4.500,@0.500 @4.500,@4.500
+!}
+!outer_longrect(){
+ !draw @0.000,@0.000 @5.000,@0.000 @5.000,@20.000 @0.000,@20.000 @0.000,@0.000
+!}
+!inner_longrect(){
+ !draw @0.500,@0.500 @4.500,@0.500 @4.500,@19.500 @0.500,@19.500 @0.500,@0.500
+!}
 
 !layer(){
+
+;--------------------
+
+!orgy=40
+
+!orgx=30
+!outer_longrect()
+
+!orgx=50
+!inner_longrect()
+!outer_longrect()
+
+!orgx=90
+!inner_square()
+!outer_square()
+
+!orgx=110
+!outer_square()
+
+!orgy=60
+!outer_vlines()
+
+!orgx=90
+!inner_vlines()
+!outer_vlines()
+
+!orgy=80
+!outer_square()
+!inner_square()
+
+!orgx=110
+!inner_square()
+
+!orgy=100
+!inner_vlines()
+
+!orgx=90
+!outer_vlines()
+!inner_vlines()
+
+!orgx=50
+!orgy=80
+!outer_longrect()
+!inner_longrect()
+
+!orgx=30
+!inner_longrect()
+
+; original test oblong
+
 !draw 68.498,79.498 \
 71.502,79.498 \
 71.502,82.502 \
@@ -58,8 +140,8 @@ M140 S60 ; set bed temperature
 M83 ; extruder relative
 G1 F1000 ;1000mm/min extrusion
 G1 E-10; retract
-G28 X0 Y0 F1800 ; home X and Y axis
-G1 F240 ;240mm/min vertical move
+G1 X0 Y0 F10000
+G28 X0 Y0
 M104 S0 ; turn off temperature
 M140 S0 ; turn off bed
 M84     ; disable motors