scaffold-clamp: wip vhook

[reprap-play.git] / scaffold-clamp-common.scad

diff --git a/scaffold-clamp-common.scad b/scaffold-clamp-common.scad
index 513273ddb4cecfe6c1ea1a320107bbd97f19b363..590d08ca8d3ef415c07dad2f02f440f7b30020d6 100644 (file)
--- a/scaffold-clamp-common.scad
+++ b/scaffold-clamp-common.scad
@@ -16,13 +16,22 @@ bolt_flat = 10 + 1;
 open_gap = 10;
 
 hinge_unit = 10;
-uhinge_z_gap = 1;
+hinge_z_gap = 1;
+
+hinge_units = 4;
+
+// vhook
+
+vhook_th = 14;
+
 
 // calculated
 
 pin_dia = th;
 hole_dia = th + pin_gap;
 
+main_r = tube_dia/2 + th;
+
 hinge_gap = pin_gap;
 
 hinge_o_r = 0.5 * hole_dia + th;
@@ -41,6 +50,17 @@ max_z = +total_z/2;
 
 pin_flatten = pin_dia/2 * (1 - cos(45));
 
+// calculated - vhook
+
+vhook_inside = 15;
+
+vhook_theta = atan2( smooth_r, main_r );
+
+vhook_y0 = -max(main_r, (tube_dia/2 + vhook_th));
+vhook_ctr = vhook_y0 - vhook_inside/2;
+vhook_outer_dia = vhook_inside + vhook_th*2;
+
+
 $fa = 3;
 $fs = 0.1;
 
@@ -49,7 +69,7 @@ module SmoothPlan(){
 }
 
 module TubePlan(){ circle(r = tube_dia/2); }
-module MainCirclePlan(){ circle(r = tube_dia/2 + th); }
+module MainCirclePlan(){ circle(r = main_r); }
 
 module PlanWeldMainCircle(){
   intersection(){
@@ -131,7 +151,7 @@ module HalfClampX(flatten=false){
   }
 }
 
-module GeneralPlanDemo(){ ////toplevel
+module PlanDemo(){ ////toplevel
   MainPlan();
   translate([0,0,-4]) color("red") Portion(1);
   translate([0,0,-2]) color("grey") Portion(0);
@@ -140,9 +160,75 @@ module GeneralPlanDemo(){ ////toplevel
     MainPlanB();
     MainPlanA();
   }
+
+  translate([0, -tube_dia*1.5]) {
+    VHookPlanDemo();
+  }
 //  translate([max_x - hinge_x + 20, 0]) color("blue") MainPlanA();
 }
 
+// ---------- vhook ----------
+
+module VHookProfile() {
+  translate([0, -vhook_inside/2 - vhook_th/2])
+    circle(r = vhook_th/2);
+}
+
+module VHookHookMain(outer=false){ ////toplevel
+  rotate([0,90,0])
+    rotate_extrude(convexity=10)
+    rotate([0,0,90])
+    hull(){
+      VHookProfile();
+      if (outer) {
+       translate([0,-vhook_outer_dia]) square(center=true, vhook_th);
+      }
+    }
+}
+
+module VHookPartA(){ ////toplevel
+  DummyA();
+
+  translate([0, vhook_ctr, 0]){
+    for (m=[0,1]) {
+      mirror([0, m, 0]) {
+       linextr(-0.1, vhook_outer_dia/2)
+         VHookProfile();
+       translate([0, -vhook_inside/2 -vhook_th/2, vhook_outer_dia/2])
+         sphere(r= vhook_th/2);
+      }
+    }
+
+    intersection(){
+      VHookHookMain(outer=true);
+      linextr_y_xz(0, vhook_outer_dia/2) hull(){
+       VHookProfile();
+       translate([0,-0.1]) square(center=true, [vhook_th, 0.2]);
+      }
+    }
+
+    intersection(){
+      VHookHookMain();
+      translate([0,0, -vhook_outer_dia])
+       cube(center=true, vhook_outer_dia*2);
+    }
+  }
+
+  //translate([0, vhook_y0, 50]) rotate([0,0,-90]) color("black") cube(10);
+  // translate([0,0,-150]) rotate([0,0,180 + theta]) color("blue") cube(100);
+}
+
+module VHookPlanDemo(){
+  VHookPlan();
+  translate([0, vhook_ctr, 5])
+    for (m=[0,1]) {
+      mirror([0,m])
+       color("blue") VHookProfile();
+    }
+}
+
+// ---------- misc ----------
+
 module GeneralB(){ ////toplevel
   HalfClampX(true);
 }