rad=12;
h=3.5;
-w=1.2;
+w=1.0;
looprad=2.5;
loopw=w;
fdia=1.77;
+//fdia=3;
+
+d=0.01;
+
+module FilamentClipTeeth(based=1.5, basew=4, teethw=0.6,
+ stembendd=0.5, stembendl=4, teethxl=1) {
+ gapw = fdia-stembendd*2;
+ teethbigw = gapw + teethw*2;
-module FilamentClipTeeth(based=1.5, basew=4, clipw=0.6) {
-// for (mirr=[0:1]) {
-// mirror([0,mirr,0]) {
-// linear_extrude(height=h) {
-// translate(0.5, square([
-// }
-// }
-// }
- extent1=1.5;
-// jaww=
translate([-based, -basew/2, 0]) cube([based, basew, h]);
+ difference() {
+ union() {
+ translate([-d, -teethbigw/2, 0])
+ cube([d+stembendl + teethw, teethbigw, h]);
// translate([
- linear_extrude(height=h) {
- FlatArc(extent1+fdia/2, 0, fdia/2, fdia/2+clipw, $fn=30);
+// stembigw = fdia + stembend
+// translate([-d, -stemw,
+ linear_extrude(height=h) {
+ translate([stembendl-fdia/2, 0]) circle(fdia/2+teethw, $fn=30);
+ }
+ }
+ translate([0,0,-1]) {
+ translate([0,-gapw/2])
+ cube([stembendl+teethxl+1, gapw, h+2]);
+ linear_extrude(height=h+2) {
+ translate([stembendl-fdia/2, 0]) circle(fdia/2, $fn=30);
+ }
+ }
+ }
+
+ for (mirr=[0:1]) {
+ mirror([0,mirr,0]) {
+ translate([stembendl + teethw, gapw/2, 0])
+ rotate([0,0,30])
+ cube([teethxl, teethw, h]);
+ }
}
}
module FilamentClip() {
+ k=1.5;
+ g=0.6;
+
rotate([0,0,-45]) {
translate([0,rad,0]) {
- ClipHook(h=h,w=w,k=1.5, ye=-1.3);
- rotate([0,0,180]) ClipHook(h=h,w=w,k=1.5, ye=0.8);
+ ClipHook(h=h, w=w, g=0.6, k=k, g=g, ye=-1.3);
+ rotate([0,0,180]) ClipHook(h=h, w=w, g=g, k=k, ye=0.8);
}
}
}
FilamentClip();
-//FilamentClipTeeth();
+FilamentClipTeeth();