air-hockey-puck: wip

[reprap-play.git] / adafruit-powerboost-500.scad

diff --git a/adafruit-powerboost-500.scad b/adafruit-powerboost-500.scad
index ddf2b2dea475126fe8af7684d3921ac86288d329..d10002e26b68caa1e9e5ce68a37f39989a1cd21b 100644 (file)
--- a/adafruit-powerboost-500.scad
+++ b/adafruit-powerboost-500.scad
@@ -1,71 +1,19 @@
 // -*- C -*-
 
-include <nutbox.scad>
+psu_sz_nom = [ 21.59, 35.56 ];
 
-psu_sz  = [ 21.7, 36.0 ] + [ 0.25, 0.25 ];
+//// toplevels-from:
+include <adafruit-powerboost-common.scad>
 
-psu_th = 1.70 + 0.25;
-psu_th_for_clamp = 1.50;
-
-psu_hole_pos = [ 2.05, // from back edge of psu_sz[0]
-                0.55 * 0.5 * 25.4, // from centreline
-                ];
-psu_hole_dia = 2.5 - 0.3;
-psu_baffle_gap = 1.0 + 0.5;
 psu_baffle_cnr_y = 7.45; // from connector end
 psu_baffle_th = [ 0.8, 3.5 ];
-psu_connector_z = 2.9 + 0.1;
-psu_connector_z_overlap = 0.15;
-psu_connector_depth = 6.25;
-psu_connector_w = 8.0 + 0.5;
-psu_usb_protr = 0.6;
 psu_usbend_led_x = 4.5;
 psu_innerend_led_depth = 10;
 
-psu_clamp_th = 4.0 + 0.75;
-psu_clamp_w = 8.0;
-psu_clamp_gap = 0.4;
-
-psu_board_clamp_ovlp = 4.5;
-psu_board_support_wall = 2;
-psu_board_nutbox = nutbox_data_M3;
-
 // ----- calculated -----
 
 psu_usbend_led_depth = psu_baffle_cnr_y*2 - psu_usbend_led_x;
 
-psu_z = NutBox_h_base(psu_board_nutbox);
-psu_z_down = psu_z + 0.1;
-
-
-module PsuBoardRepresentation(){
-  linear_extrude(height= psu_th)
-    square(center=true, [psu_sz[0],psu_sz[1]]);
-}
-
-module PsuRepresentation(){
-  PsuBoardRepresentation();
-  translate([0, -psu_sz[1]/2, -psu_connector_z])
-    linear_extrude(height= psu_connector_z + psu_connector_z_overlap)
-    rectfromto([ -psu_connector_w/2, -10 ],
-              [ +psu_connector_w/2, psu_connector_depth ]);
-}
-
-module AtPsuMountCorner(mx,my){
-  mirror([mx,0,0])
-    mirror([0,my,0])
-      translate(-0.5 * [psu_sz[0], psu_sz[1], 0]
-               -1 * [0,0, psu_z_down])
-       children();
-}
-
-module PsuMountCornerExtrude(mx,my, plus_z=board_support_z){
-  AtPsuMountCorner(mx,my){
-    linear_extrude(height= psu_z_down + plus_z, convexity=10) {
-      children();
-    }
-  }
-}
 
 module PsuLedBafflePlan(){
   baffle_tr = [0, psu_baffle_cnr_y]
@@ -81,15 +29,21 @@ module PsuLedBafflePlan(){
   }
 }
 
-module PsuLedWindowsPlan(){
+module PsuLedLegendsPlan(){
+}
+
+module PsuLedWindowsPlanCore(){
   difference(){
     union(){
+      // Two LEDs incl "Chrg", one side of inlet connector
       AtPsuMountCorner(1,0) {
        rectfromto([ -(psu_board_support_wall + 0.1),
                     +psu_usbend_led_x ],
                   [ psu_sz[0]/2,
                     +psu_usbend_led_depth ]);
       }
+
+      // One LED, "Low", other side of inlet connector
       AtPsuMountCorner(0,0) {
        sz = psu_baffle_cnr_y - psu_board_support_wall - psu_baffle_th[0];
        translate([0, psu_baffle_cnr_y])
@@ -98,89 +52,15 @@ module PsuLedWindowsPlan(){
                     [ psu_sz[0]/2,
                       +sz/2 ]);
       }
+
+      // One LED, PWR, near outlet USB pads
       AtPsuMountCorner(0,1){
        rectfromto([0,0],
                   [psu_sz[0]/2 - psu_hole_pos[1] - psu_hole_dia/2,
                     psu_innerend_led_depth]);
       }
     }
-    PsuLedBafflePlan();
     translate([0, -psu_sz[1]/2])
       square(center=true, [psu_baffle_th[1], psu_sz[1]]);;
   }
 }
-
-module PsuMountPositiveMain(){
-  for (mx=[0,1]) {
-    for (my=[0,1]) {
-      PsuMountCornerExtrude(mx,my){
-       rectfromto(-[1,1]*psu_board_support_wall,
-                  +[1,1]*board_support_ovlp);
-      }
-    }
-    // mount above at plug end
-    PsuMountCornerExtrude(mx,0, psu_th + psu_board_support_wall){
-      rectfromto(-[1,1]*psu_board_support_wall,
-                [board_support_ovlp,
-                 board_support_ovlp_ceil]);
-    }
-  }
-  translate([0,0, -psu_z_down])
-    linear_extrude(psu_z_down - psu_baffle_gap, convexity=10)
-      PsuLedBafflePlan();
-}
-
-module PsuMountNegative(){
-  axis = [0, -psu_sz[1]/2, psu_th];
-  PsuRepresentation();
-  translate(axis)
-    rotate([atan(2 * board_support_z / psu_sz[1]),
-           0,0])
-    translate(-axis)
-    PsuBoardRepresentation();
-}
-
-module PsuMountPositive(){
-  difference(){
-    PsuMountPositiveMain();
-    PsuMountNegative();
-    intersection(){
-      hull(){
-       PsuBoardRepresentation();
-       translate([0,0,5]) PsuBoardRepresentation();
-      }
-      translate([-20,0,-20]) cube(40);
-    }
-  }
-  for (mx=[0,1]) {
-    PsuMountCornerExtrude(mx,1){
-      translate([psu_sz[0]/2 - psu_hole_pos[1],
-                psu_hole_pos[0]]
-               + board_gap * [1,1] )
-       circle(r= psu_hole_dia/2);
-    }
-  }
-  translate([0, psu_sz[1]/2 + psu_board_nutbox[0]/2, 0])
-    rotate([0,0,180])
-    NutBox(psu_board_nutbox, psu_z_down);
-}
-
-module PsuClamp(){ ////toplevel
-  rotate([180,0,0]) difference(){
-    linear_extrude(height=psu_clamp_th + psu_th_for_clamp, convexity=5) {
-      difference(){
-       hull(){
-         circle(r = fix_sz/2);
-         translate([ -psu_board_nutbox[0]/2, 0])
-           square(center=true, [ psu_board_clamp_ovlp*2, psu_clamp_w ]);
-       }
-       circle(r = psu_board_nutbox[0]/2);
-      }
-    }
-    translate([0,0,-1]) linear_extrude(height=psu_th_for_clamp+1) {
-      translate([ -psu_board_nutbox[0]/2 + psu_clamp_gap, 0 ])
-       mirror([1,0])
-       translate([0,-20]) square(40);
-    }
-  }
-}