10254 initial attempt

[reprap-play.git] / INSTRUCTIONS

diff --git a/INSTRUCTIONS b/INSTRUCTIONS
index bfc6763f3f362aed3842182157fdb7736229a12e..9b6aff005499986e9a6c9085811e337d787e97bc 100644 (file)
--- a/INSTRUCTIONS
+++ b/INSTRUCTIONS
@@ -4,7 +4,8 @@ To print:
  * Start pronterface
      cd /home/reprap/reprappro-software.git/
      ./pronterface.py 
- * Select "connect", wait for printer to connect
+ * Select "connect" (make sure it's ttyUSB0 115200),
+   wait for printer to connect
  * Turn on the hotend and bed heaters
  * "Load file", select the .stl file.  It will be sliced.
  * "Load file", select the _export.gcode file.  It will show up on the RHS.
@@ -23,9 +24,13 @@ To print:
 
 ------------------------------------------------------------
 
+~/.pronsolerc -> /home/ian/things/Reprap/play/pronsolerc (adjust to taste)
+
 openscad - use wheezy
 Slic3r - is from slic3r-linux-x86-0-8-4.tar.gz
 
+repsnapper - only used this so far for its gcode viewer
+
 ------------------------------------------------------------
 
 firmware upgrade: