; -*- fundamental -*-

; slic3r originally produced this, with these comments, and then we edited:
; layer_height = 0.4
; perimeters = 3
; solid_layers = 3
; fill_density = 0.4
; perimeter_speed = 30
; infill_speed = 60
; travel_speed = 130
; scale = 1
; nozzle_diameter = 0.59
; filament_diameter = 1.77
; extrusion_multiplier = 1
; single wall width = 0.71mm
; first layer single wall width = 0.60mm

M190 S65 ; wait for bed temperature to be reached
M104 S215 ; set temperature
G28 ; home all axes
M109 S215 ; wait for temperature to be reached
G90 ; use absolute coordinates
G21 ; set units to millimeters
G92 E0
M82 ; use absolute distances for extrusion

!zprint=0.4

!draw 10,10 100,10 102,12 102,14 100,16 10,16

!layer(){
!draw 68.498,79.498 \
71.502,79.498 \
71.502,82.502 \
68.498,82.502 \
68.498,79.588 \
*67.899,78.899 \
72.101,78.899 \
72.101,83.101 \
67.899,83.101 \
67.899,78.989 \
*67.300,78.300 \
72.700,78.300 \
72.700,83.700 \
67.300,83.700 \
67.300,78.390 \

!}

!layer()

M104 S210 ; set temperature
M140 S60 ; set bed temperature

!zprint=0.8
!layer()

M83 ; extruder relative
G1 F1000 ;1000mm/min extrusion
G1 E-10; retract
G1 X0 Y0 F10000
G28 X0 Y0
M104 S0 ; turn off temperature
M140 S0 ; turn off bed
M84     ; disable motors