// -*- C -*-

include <nutbox.scad>
include <utils.scad>

psu_sz  = psu_sz_nom + [ 0.11, 0.44 ] + [ 0.25, 0.25 ];

psu_th = 1.70 + 0.25;
psu_th_for_clamp = 1.50;

psu_hole_dia = 2.5 - 0.3;
psu_connector_z = 2.9 + 0.1;
psu_connector_z_overlap = 0.15;
psu_connector_depth = 6.25;
psu_connector_w = 8.0 + 0.5;
psu_usb_protr = 0.6;

psu_clamp_th = 4.0 + 0.75;
psu_clamp_w = 8.0;
psu_clamp_gap = 0.4;

psu_board_clamp_ovlp = 4.5;
psu_board_nutbox = nutbox_data_M3;

psu_board_gap = 0.5;
psu_board_support_wall = 2;
psu_board_support_ovlp = 4.5;
psu_board_support_ovlp_ceil = 2;
psu_board_support_z = 2;

psu_baffle_gap = 1.0 + 0.5;

psu_y = +psu_sz[1]/2 + psu_usb_protr;

// ----- calculated -----

psu_z = NutBox_h_base(psu_board_nutbox);
psu_z_down = psu_z + 0.1;

module PsuBoardRepresentation(){
  linear_extrude(height= psu_th)
    square(center=true, [psu_sz[0],psu_sz[1]]);
}

module PsuRepresentation(){
  PsuBoardRepresentation();
  translate([0, -psu_sz[1]/2, -psu_connector_z])
    linear_extrude(height= psu_connector_z + psu_connector_z_overlap)
    rectfromto([ -psu_connector_w/2, -10 ],
	       [ +psu_connector_w/2, psu_connector_depth ]);
}

module AtPsuMountCorner(mx,my){
  mirror([mx,0,0])
    mirror([0,my,0])
      translate(-0.5 * [psu_sz[0], psu_sz[1], 0]
		-1 * [0,0, psu_z_down])
	children();
}

module PsuMountCornerExtrude(mx,my, plus_z=psu_board_support_z){
  AtPsuMountCorner(mx,my){
    linear_extrude(height= psu_z_down + plus_z, convexity=10) {
      children();
    }
  }
}

module PsuMountPositiveMain(){
  for (mx=[0,1]) {
    for (my=[0,1]) {
      PsuMountCornerExtrude(mx,my){
	rectfromto(-[1,1]*psu_board_support_wall,
		   +[1,1]*psu_board_support_ovlp);
      }
    }
    // mount above at plug end
    PsuMountCornerExtrude(mx,0, psu_th + psu_board_support_wall){
      rectfromto(-[1,1]*psu_board_support_wall,
		 [psu_board_support_ovlp,
		  psu_board_support_ovlp_ceil]);
    }
  }
  translate([0,0, -psu_z_down])
    linear_extrude(psu_z_down - psu_baffle_gap, convexity=10)
      PsuLedBafflePlan();
}

module PsuMountNegative(){
  axis = [0, -psu_sz[1]/2, psu_th];
  PsuRepresentation();
  translate(axis)
    rotate([atan(2 * psu_board_support_z / psu_sz[1]),
	    0,0])
    translate(-axis)
    PsuBoardRepresentation();
}

module PsuMountPositive(){
  difference(){
    intersection(){
      PsuMountPositiveMain();
      linextr_y_xz(-psu_y, psu_sz[1]*2) square(100, center=true);
    }
    PsuMountNegative();
    intersection(){
      hull(){
	PsuBoardRepresentation();
	translate([0,0,5]) PsuBoardRepresentation();
      }
      translate([-20,0,-20]) cube(40);
    }
  }
  for (mx=[0,1]) {
    PsuMountCornerExtrude(mx,1){
      translate([psu_sz[0]/2 - psu_hole_pos[1],
		 psu_hole_pos[0]]
		+ psu_board_gap * [1,1] )
	circle(r= psu_hole_dia/2);
    }
  }
  translate([0, psu_sz[1]/2 + psu_board_nutbox[0]/2, 0])
    rotate([0,0,180])
    NutBox(psu_board_nutbox, psu_z_down);
}

module PsuClamp(){ ////toplevel
  rotate([180,0,0]) difference(){
    linear_extrude(height=psu_clamp_th + psu_th_for_clamp, convexity=5) {
      difference(){
	hull(){
	  circle(r = fix_sz/2);
	  translate([ -psu_board_nutbox[0]/2, 0])
	    square(center=true, [ psu_board_clamp_ovlp*2, psu_clamp_w ]);
	}
	circle(r = psu_board_nutbox[0]/2);
      }
    }
    translate([0,0,-1]) linear_extrude(height=psu_th_for_clamp+1) {
      translate([ -psu_board_nutbox[0]/2 + psu_clamp_gap, 0 ])
	mirror([1,0])
	translate([0,-20]) square(40);
    }
  }
}

module PsuLedWindowsPlan(){
  difference(){
    PsuLedWindowsPlanCore();
    PsuLedBafflePlan();
  }
}

module PsuMountDemo(ceil = 2.5) { ////toplevel
  translate([0, psu_y, psu_z]) {
    PsuMountPositive();
    %PsuMountNegative();
    color("yellow") translate([0,0, -psu_z - ceil])
      linear_extrude(height=0.4, convexity=10)
      PsuLedWindowsPlan();
  }
}