slic3r-config.ini

   1 # generated by Slic3r 0.9.1 on Sun Aug 12 23:02:53 2012
   2 acceleration = 0
   3 bed_size = 140,140
   4 bed_temperature = 80
   5 bridge_fan_speed = 100
   6 bridge_flow_ratio = 1
   7 bridge_speed = 60
   8 brim_width = 0
   9 complete_objects = 0
  10 cooling = 0
  11 disable_fan_first_layers = 1
  12 duplicate = 1
  13 duplicate_distance = 6
  14 duplicate_grid = 1,1
  15 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
  16 external_perimeter_speed = 100%
  17 extra_perimeters = 1
  18 extruder_clearance_height = 20
  19 extruder_clearance_radius = 20
  20 extruder_offset = 0x0
  21 extrusion_axis = E
  22 extrusion_multiplier = 1
  23 extrusion_width = 0
  24 fan_always_on = 0
  25 fan_below_layer_time = 60
  26 filament_diameter = 1.77
  27 fill_angle = 45
  28 fill_density = 0.4
  29 fill_pattern = rectilinear
  30 first_layer_bed_temperature = 65
  31 first_layer_extrusion_width = 150%
  32 first_layer_height = 0.4
  33 first_layer_speed = 30%
  34 first_layer_temperature = 215
  35 g0 = 0
  36 gcode_arcs = 0
  37 gcode_comments = 0
  38 gcode_flavor = reprap
  39 infill_acceleration = 50
  40 infill_every_layers = 1
  41 infill_extruder = 1
  42 infill_extrusion_width = 0
  43 infill_speed = 60
  44 layer_gcode =
  45 layer_height = 0.4
  46 max_fan_speed = 100
  47 min_fan_speed = 35
  48 min_print_speed = 10
  49 notes =
  50 nozzle_diameter = 0.50
  51 output_filename_format = [input_filename_base].gcode
  52 perimeter_acceleration = 25
  53 perimeter_extruder = 1
  54 perimeter_extrusion_width = 100%
  55 perimeter_speed = 30
  56 perimeters = 1
  57 post_process =
  58 print_center = 70,70
  59 randomize_start = 1
  60 retract_before_travel = 2
  61 retract_length = 4.5
  62 retract_lift = 0.1
  63 retract_restart_extra = 0
  64 retract_speed = 30
  65 rotate = 0
  66 scale = 1
  67 skirt_distance = 12
  68 skirt_height = 1
  69 skirts = 2
  70 slowdown_below_layer_time = 15
  71 small_perimeter_speed = 30
  72 solid_fill_pattern = rectilinear
  73 solid_infill_speed = 60
  74 solid_layers = 3
  75 start_gcode = G28 ; home all axes
  76 support_material = 0
  77 support_material_angle = 0
  78 support_material_extruder = 1
  79 support_material_extrusion_width = 0
  80 support_material_pattern = rectilinear
  81 support_material_spacing = 2.5
  82 support_material_threshold = 45
  83 temperature = 210
  84 threads = 8
  85 top_solid_infill_speed = 50
  86 travel_speed = 130
  87 use_relative_e_distances = 0
  88 z_offset = 0