slic3r-config.ini

   1 acceleration = 0
   2 bed_size = 140,140
   3 bed_temperature = 70
   4 bridge_fan_speed = 100
   5 bridge_flow_ratio = 1
   6 bridge_speed = 60
   7 brim_width = 0
   8 complete_objects = 0
   9 cooling = 0
  10 disable_fan_first_layers = 1
  11 duplicate = 1
  12 duplicate_distance = 6
  13 duplicate_grid = 1,1
  14 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
  15 extra_perimeters = 1
  16 extruder_clearance_height = 20
  17 extruder_clearance_radius = 20
  18 extrusion_axis = E
  19 extrusion_multiplier = 1.1
  20 extrusion_width = 0
  21 fan_always_on = 0
  22 fan_below_layer_time = 60
  23 filament_diameter = 1.8
  24 fill_angle = 45
  25 fill_density = 0.4
  26 fill_pattern = rectilinear
  27 first_layer_bed_temperature = 80
  28 first_layer_extrusion_width = 0
  29 first_layer_height = 100%
  30 first_layer_speed = 30%
  31 first_layer_temperature = 190
  32 g0 = 0
  33 gcode_arcs = 0
  34 gcode_comments = 0
  35 gcode_flavor = reprap
  36 infill_acceleration = 50
  37 infill_every_layers = 1
  38 infill_extrusion_width = 0
  39 infill_speed = 60
  40 layer_gcode =
  41 layer_height = 0.4
  42 max_fan_speed = 100
  43 min_fan_speed = 35
  44 min_print_speed = 10
  45 notes =
  46 nozzle_diameter = 0.5
  47 output_filename_format = [input_filename_base].gcode
  48 perimeter_acceleration = 25
  49 perimeter_speed = 30
  50 perimeters = 3
  51 perimeters_extrusion_width = 0
  52 post_process =
  53 print_center = 70,70
  54 randomize_start = 1
  55 retract_before_travel = 2
  56 retract_length = 4.5
  57 retract_lift = 0.1
  58 retract_restart_extra = 0.1
  59 retract_speed = 30
  60 rotate = 0
  61 scale = 1
  62 skirt_distance = 12
  63 skirt_height = 1
  64 skirts = 2
  65 slowdown_below_layer_time = 15
  66 small_perimeter_speed = 30
  67 solid_fill_pattern = rectilinear
  68 solid_infill_speed = 60
  69 solid_layers = 3
  70 start_gcode = G28 ; home all axes
  71 support_material = 0
  72 support_material_angle = 0
  73 support_material_pattern = rectilinear
  74 support_material_spacing = 2.5
  75 support_material_threshold = 45
  76 support_material_tool = 0
  77 temperature = 190
  78 threads = 8
  79 top_solid_infill_speed = 50
  80 travel_speed = 130
  81 use_relative_e_distances = 0
  82 z_offset = 0.0