size-tests.m-g

   1 ; -*- fundamental -*-
   2
   3 ; slic3r originally produced this, with these comments, and then we edited:
   4 ; layer_height = 0.4
   5 ; perimeters = 3
   6 ; solid_layers = 3
   7 ; fill_density = 0.4
   8 ; perimeter_speed = 30
   9 ; infill_speed = 60
  10 ; travel_speed = 130
  11 ; scale = 1
  12 ; nozzle_diameter = 0.59
  13 ; filament_diameter = 1.77
  14 ; extrusion_multiplier = 1
  15 ; single wall width = 0.71mm
  16 ; first layer single wall width = 0.60mm
  17
  18 M190 S65 ; wait for bed temperature to be reached
  19 M104 S215 ; set temperature
  20 G28 ; home all axes
  21 M109 S215 ; wait for temperature to be reached
  22 G90 ; use absolute coordinates
  23 G21 ; set units to millimeters
  24 G92 E0
  25 M82 ; use absolute distances for extrusion
  26
  27 !zprint=0.3
  28
  29 ; "skirt" - prep extruder
  30 !draw 5,5 100,5 101,5.5 101,6.0 100,6.5 5,6.5
  31
  32 ; edge ticks for global motions sizing
  33
  34 !edge_ticks(){
  35 !draw 20,10 10,10 10,20
  36 !draw 10,65 10,75
  37 !draw 10,120 10,130 20,130
  38 !draw 65,130 75,130
  39 !draw 120,130 130,130 130,120
  40 !draw 130,75 130,65
  41 !draw 130,20 130,10 120,10
  42 !draw 75,10 65,10
  43 !}
  44
  45 ;!edge_ticks()
  46
  47 !outer_square(){
  48  !draw @0.000,@0.000 @5.000,@0.000 @5.000,@5.000 @0.000,@5.000 @0.000,@0.000
  49 !}
  50 !inner_square(){
  51  !draw @0.500,@0.500 @4.500,@0.500 @4.500,@4.500 @0.500,@4.500 @0.500,@0.500
  52 !}
  53 !outer_vlines(){
  54  !draw @0.000,@0.000 @0.000,@5.000
  55  !draw @5.000,@0.000 @5.000,@5.000
  56 !}
  57 !inner_vlines(){
  58  !draw @0.500,@0.500 @0.500,@4.500
  59  !draw @4.500,@0.500 @4.500,@4.500
  60 !}
  61 !outer_longrect(){
  62  !draw @0.000,@0.000 @5.000,@0.000 @5.000,@20.000 @0.000,@20.000 @0.000,@0.000
  63 !}
  64 !inner_longrect(){
  65  !draw @0.500,@0.500 @4.500,@0.500 @4.500,@19.500 @0.500,@19.500 @0.500,@0.500
  66 !}
  67
  68 !org_oblong(){
  69 ; original test oblong
  70
  71 !draw 68.498,79.498 \
  72 71.502,79.498 \
  73 71.502,82.502 \
  74 68.498,82.502 \
  75 68.498,79.588 \
  76 *67.899,78.899 \
  77 72.101,78.899 \
  78 72.101,83.101 \
  79 67.899,83.101 \
  80 67.899,78.989 \
  81 *67.300,78.300 \
  82 72.700,78.300 \
  83 72.700,83.700 \
  84 67.300,83.700 \
  85 67.300,78.390 \
  86
  87 !}
  88
  89 !layer(){
  90
  91 ;--------------------
  92
  93 !orgy=40
  94
  95 !orgx=30
  96 !outer_longrect()
  97
  98 !orgx=50
  99 !inner_longrect()
 100 !outer_longrect()
 101
 102 !orgx=90
 103 !inner_square()
 104 !outer_square()
 105
 106 !orgx=110
 107 !outer_square()
 108
 109 !orgy=60
 110 !outer_vlines()
 111
 112 !orgx=90
 113 !inner_vlines()
 114 !outer_vlines()
 115
 116 !orgy=80
 117 !outer_square()
 118 !inner_square()
 119
 120 !orgx=110
 121 !inner_square()
 122
 123 !orgy=100
 124 !inner_vlines()
 125
 126 !orgx=90
 127 !outer_vlines()
 128 !inner_vlines()
 129
 130 !orgx=50
 131 !orgy=80
 132 !outer_longrect()
 133 !inner_longrect()
 134
 135 !orgx=30
 136 !inner_longrect()
 137
 138 !org_oblong()
 139
 140 !}
 141
 142 !layer()
 143
 144 M104 S210 ; set temperature
 145 M140 S60 ; set bed temperature
 146
 147 !zprint=0.7
 148 !layer()
 149
 150 M83 ; extruder relative
 151 G1 F1000 ;1000mm/min extrusion
 152 G1 E-10; retract
 153 G1 X0 Y0 F10000
 154 G28 X0 Y0
 155 M104 S0 ; turn off temperature
 156 M140 S0 ; turn off bed
 157 M84     ; disable motors