chiark / gitweb /
9 years ago80-net-name-slot.rules: only rename network interfaces on ACTION=="add"
Harald Hoyer [Thu, 1 Aug 2013 10:31:38 +0000 (12:31 +0200)]
80-net-name-slot.rules: only rename network interfaces on ACTION=="add"

Otherwise systemd-udevd will rename on "change" and "move" events,
resulting in weird renames in combination with biosdevname

systemd-udevd[355]: renamed network interface eth0 to em1
systemd-udevd[355]: renamed network interface eth1 to p3p2
systemd-udevd[357]: renamed network interface eth0 to p3p1
systemd-udevd[429]: renamed network interface p3p2 to ens3f1
systemd-udevd[428]: renamed network interface p3p1 to ens3f0
systemd-udevd[426]: renamed network interface em1 to enp63s0


systemd-udevd[356]: renamed network interface eth0 to em1
systemd-udevd[356]: renamed network interface eth0 to p3p1
systemd-udevd[420]: renamed network interface p3p1 to ens3f0
systemd-udevd[418]: renamed network interface em1 to enp63s0
systemd-udevd[421]: renamed network interface eth1 to p3p1

9 years agoAdd /usr/share/keymaps to localectl supported locations.
Michał Górny [Wed, 31 Jul 2013 21:12:17 +0000 (23:12 +0200)]
Add /usr/share/keymaps to localectl supported locations.

This is the standard upstream location where kbd installs keymaps.

9 years agobash-completion: simplify udevadm completion
Dave Reisner [Tue, 30 Jul 2013 17:00:00 +0000 (13:00 -0400)]
bash-completion: simplify udevadm completion

The AA is unnecessary and only adds needless complexity. Replace it
with a case statement instead of repeatedly calling __contains_word to
overglorify string equalities.

9 years agobash-completion: use a better definition of __contains_word
Dave Reisner [Tue, 30 Jul 2013 16:46:23 +0000 (12:46 -0400)]
bash-completion: use a better definition of __contains_word

- scope the iterator var
- use the correct, quoted, non-expansion prone positional parameter
- prevent expansion on RHS of comparison
- remove unneeded explicit returns.

This really should be defined only once...

9 years agotest-unit-file: return error without dumping core on permission error
Christian Hesse [Tue, 30 Jul 2013 13:07:20 +0000 (09:07 -0400)]
test-unit-file: return error without dumping core on permission error

9 years agotest-fileio: use random name for written file
Zbigniew Jędrzejewski-Szmek [Mon, 29 Jul 2013 23:49:55 +0000 (19:49 -0400)]
test-fileio: use random name for written file

If two instances of test-fileio were run in parallel,
they could fail when trying to write the same file.
This predictable name in /tmp/ wasn't actually a security
issue, because write_env_file would not follow symlinks,
so this could be an issue only when running tests in

9 years agosimplify bash completion for kernel-install
Harald Hoyer [Mon, 29 Jul 2013 15:48:29 +0000 (17:48 +0200)]
simplify bash completion for kernel-install

9 years agoudev-rules: report rule parsing errors from get_key
Dave Reisner [Mon, 29 Jul 2013 22:18:43 +0000 (18:18 -0400)]
udev-rules: report rule parsing errors from get_key

9 years agobuild-sys: support old glibc versions without clock_gettime()
Kay Sievers [Tue, 30 Jul 2013 01:38:55 +0000 (03:38 +0200)]
build-sys: support old glibc versions without clock_gettime()

9 years agologind: make sure login sessions are terminated with SIGHUP
Lennart Poettering [Tue, 30 Jul 2013 00:51:12 +0000 (02:51 +0200)]
logind: make sure login sessions are terminated with SIGHUP

bash ignores SIGTERM, and can only be terminated cleanly via SIGHUP.
Hence make sure that we the scope unit for the session is created with
SendSIGHUP enabled.

9 years agoupdate TODO
Lennart Poettering [Tue, 30 Jul 2013 00:51:07 +0000 (02:51 +0200)]
update TODO

9 years agocore: make sure scope attributes survive a reload
Lennart Poettering [Tue, 30 Jul 2013 00:50:44 +0000 (02:50 +0200)]
core: make sure scope attributes survive a reload

9 years agocore: open up SendSIGHUP property for transient units
Lennart Poettering [Tue, 30 Jul 2013 00:28:22 +0000 (02:28 +0200)]
core: open up SendSIGHUP property for transient units

9 years agobuild: do not link everything with -lrt (and therefore -pthread)
Shawn Landden [Mon, 22 Jul 2013 03:57:35 +0000 (20:57 -0700)]
build: do not link everything with -lrt (and therefore -pthread)

9 years agodo not pass-along the environment from the kernel or initrd
Kay Sievers [Tue, 30 Jul 2013 00:02:45 +0000 (02:02 +0200)]
do not pass-along the environment from the kernel or initrd

9 years agocore: optionally send SIGHUP in addition to the configured kill signal
Lennart Poettering [Mon, 29 Jul 2013 23:54:59 +0000 (01:54 +0200)]
core: optionally send SIGHUP in addition to the configured kill signal

This is useful to fake session ends for processes like shells.

9 years agoupdate TODO
Lennart Poettering [Mon, 29 Jul 2013 21:08:31 +0000 (23:08 +0200)]
update TODO

9 years agoupdate TODO
Lennart Poettering [Mon, 29 Jul 2013 16:43:27 +0000 (18:43 +0200)]
update TODO

9 years agoupdate TODO
Lennart Poettering [Mon, 29 Jul 2013 14:39:22 +0000 (16:39 +0200)]
update TODO

9 years agoman: reowrk list of documented unit search paths
Lennart Poettering [Wed, 24 Jul 2013 15:31:44 +0000 (17:31 +0200)]
man: reowrk list of documented unit search paths

The generator paths are internal implementation details, they should not
be documented explicitly.

We should document where private user units are found however.

9 years agoman: there is no session mode, only user mode
Lennart Poettering [Wed, 24 Jul 2013 15:31:37 +0000 (17:31 +0200)]
man: there is no session mode, only user mode

9 years agoman: link up scope+slice units from systemd.unit(5)
Lennart Poettering [Wed, 24 Jul 2013 15:31:17 +0000 (17:31 +0200)]
man: link up scope+slice units from systemd.unit(5)

9 years agoman: systemd.unit: fix volatile path
Brandon Philips [Sat, 27 Jul 2013 16:49:58 +0000 (09:49 -0700)]
man: systemd.unit: fix volatile path

The volatile path was '/run/systemd/systemd' when it should be
'/run/systemd/system'. Fix.

9 years agoTODO: remove kernel env var importing fix
Kay Sievers [Sat, 27 Jul 2013 17:54:29 +0000 (19:54 +0200)]
TODO: remove kernel env var importing fix

9 years agosystemctl.8: fix typo in SEE ALSO
Dave Reisner [Sat, 27 Jul 2013 00:01:33 +0000 (20:01 -0400)]
systemctl.8: fix typo in SEE ALSO

9 years agologind: update the session state file before we send out the CreateSession() reply
Lennart Poettering [Fri, 26 Jul 2013 16:59:46 +0000 (18:59 +0200)]
logind: update the session state file before we send out the CreateSession() reply

9 years agorework systemd's own process environment handling/passing
Kay Sievers [Fri, 26 Jul 2013 03:22:22 +0000 (05:22 +0200)]
rework systemd's own process environment handling/passing

Stop importing non-sensical kernel-exported variables. All
parameters in the kernel command line are exported to the
initial environment of PID1, but suppressed if they are
recognized by kernel built-in code. The EFI booted kernel
will add further kernel-internal things which do not belong
into userspace.

The passed original environ data of the process is not touched
and preserved across re-execution, to allow external reading of
/proc/self/environ for process properties like container*=.

9 years agojournalctl: use _COMM= match for scripts
Zbigniew Jędrzejewski-Szmek [Fri, 19 Jul 2013 08:02:50 +0000 (04:02 -0400)]
journalctl: use _COMM= match for scripts

In case of scripts, _EXE is set to the interpreter name, and
_COMM is set based on the file name. Add a match for _COMM,
and _EXE if the interpreter is not a link (e.g. for yum,
the interpreter is /usr/bin/python, but it is a link to
/usr/bin/python2, which in turn is a link to /usr/bin/python2.7,
at least on Fedora, so we end up with _EXE=/usr/bin/python2.7).
I don't think that such link chasing makes sense, because
the final _EXE name is more likely to change.

9 years agologind: update state file after generating the session fifo, not before
Lennart Poettering [Fri, 26 Jul 2013 15:32:19 +0000 (17:32 +0200)]
logind: update state file after generating the session fifo, not before

9 years agosystemd-python: fix gcc warning
Zbigniew Jędrzejewski-Szmek [Fri, 26 Jul 2013 15:02:27 +0000 (11:02 -0400)]
systemd-python: fix gcc warning

src/python-systemd/_reader.c: In function Reader_get_catalog:
src/python-systemd/_reader.c:912:53: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
             assert(mid_len > l);

9 years agobuild-sys: use pkg-config for python compilation flags
Zbigniew Jędrzejewski-Szmek [Fri, 26 Jul 2013 14:08:15 +0000 (10:08 -0400)]
build-sys: use pkg-config for python compilation flags

Python 2.7, and 3.2 and higher support querying compilation
flags through pkg-config. This makes python support follow
rules similar to various other optional compilation-time
libraries. New flags are called PYTHON_DEVEL_CFLAGS and
PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is
already used for the python binary name, and things would
be confusing if the same prefix was used for two things.
configure has --disable-python-devel to disable python modules.

One advantage is that CFLAGS for modules gets smaller:
- -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv
+ -I/usr/include/python3.3m
as does LIBS:
- -lpthread -ldl -lutil -lm -lpython3.3m
+ -lpython3.3m

Support for Python 2.6 is removed, but can be easily
restored by using
PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)",
etc., as ./configure parameters.

9 years agosystemd-python: use modern C
Zbigniew Jędrzejewski-Szmek [Thu, 25 Jul 2013 22:55:08 +0000 (18:55 -0400)]
systemd-python: use modern C

9 years agosystemctl: rearrange --help output a bit
Lennart Poettering [Fri, 26 Jul 2013 15:11:41 +0000 (17:11 +0200)]
systemctl: rearrange --help output a bit

9 years agosystemctl: remove "load" command
Lennart Poettering [Fri, 26 Jul 2013 15:05:43 +0000 (17:05 +0200)]
systemctl: remove "load" command

"systemctl load" has always been racy since the GC could hit any time,
before making use of the loaded unit. Very recent systemd will run GC
immeidately after all unit state changes which has the effect that the
the effect of "systemctl load" is completely gone now, so let's remove
the support for it in "systemctl" for good.

9 years agosystemctl: move set-log-level to systemd-analyze
Lennart Poettering [Fri, 26 Jul 2013 14:59:55 +0000 (16:59 +0200)]
systemctl: move set-log-level to systemd-analyze

"systemctl set-log-level" is a command for analysis and tracing hence
"systemd-analyze" should be the better home for it, thus allowing us to
make the overly large "systemctl" a bit smaller.

9 years agosystemctl: move "dump" command from systemctl to systemd-analyze
Lennart Poettering [Fri, 26 Jul 2013 14:34:52 +0000 (16:34 +0200)]
systemctl: move "dump" command from systemctl to systemd-analyze

It's an analysis command and its format is explicitly not covered by any
stability guarantees, hence move away from systemctl and into
systemd-analyze, minimizing the already large interface of systemctl a

This patch also adds auto-paging to the various systemd-analyze commands
where that makes sense

9 years agocore: allow setting RemainAfterExit= for transient services
Lennart Poettering [Fri, 26 Jul 2013 14:09:25 +0000 (16:09 +0200)]
core: allow setting RemainAfterExit= for transient services

9 years agoshared: split mkdir_*() and mkdir_*_label() from each other
Kay Sievers [Fri, 26 Jul 2013 01:34:18 +0000 (03:34 +0200)]
shared: split mkdir_*() and mkdir_*_label() from each other

Avoid pulling-in selinux for tools which just create directories
but not need to fix the selinux label.

9 years agoshell-completion: add kernel-install
Kay Sievers [Fri, 26 Jul 2013 00:33:51 +0000 (02:33 +0200)]
shell-completion: add kernel-install

9 years agotmpfiles-setup: exclude /dev prefixes files
Dave Reisner [Wed, 24 Jul 2013 15:58:35 +0000 (11:58 -0400)]
tmpfiles-setup: exclude /dev prefixes files

Fixes Arch Linux bug:

9 years agotmpfiles: introduce --exclude-prefix
Dave Reisner [Wed, 24 Jul 2013 15:19:24 +0000 (11:19 -0400)]
tmpfiles: introduce --exclude-prefix

The opposite of --prefix, allows specifying path prefixes which should
be skipped when processing rules.

9 years agotmpfiles: support passing --prefix multiple times
Dave Reisner [Wed, 24 Jul 2013 15:10:05 +0000 (11:10 -0400)]
tmpfiles: support passing --prefix multiple times

9 years agoudev: static_node - don't touch permissions uneccessarily
Tom Gundersen [Wed, 24 Jul 2013 13:05:48 +0000 (15:05 +0200)]
udev: static_node - don't touch permissions uneccessarily

Don't set default permissions if only TAGS were specified in a rule.

9 years agoudev: log error if chmod/chown of static dev nodes fails
Tom Gundersen [Wed, 24 Jul 2013 12:55:19 +0000 (14:55 +0200)]
udev: log error if chmod/chown of static dev nodes fails

9 years agoshell-completion: Add machinectl zsh completion
William Giokas [Wed, 24 Jul 2013 02:55:22 +0000 (21:55 -0500)]
shell-completion: Add machinectl zsh completion

9 years agoinitctl: use irreversible jobs when switching runlevels
Zbigniew Jędrzejewski-Szmek [Wed, 24 Jul 2013 02:01:39 +0000 (22:01 -0400)]
initctl: use irreversible jobs when switching runlevels

Spotted by uau in #systemd.

9 years agoREADME: Bump to Linux 3.0
Jesper Larsen [Tue, 23 Jul 2013 13:50:09 +0000 (15:50 +0200)]
README: Bump to Linux 3.0

Support for writing to cgroup.procs was introduced in 3.0

9 years agojournal: immediately sync to disk as soon as we receieve an EMERG/ALERT/CRIT message
Lennart Poettering [Wed, 24 Jul 2013 06:08:57 +0000 (08:08 +0200)]
journal: immediately sync to disk as soon as we receieve an EMERG/ALERT/CRIT message

9 years agocore: synchronously block when logging
Lennart Poettering [Wed, 24 Jul 2013 05:24:05 +0000 (07:24 +0200)]
core: synchronously block when logging

Previously, the logging sockets were asynchronous and if clogged we'd
lose messages. We did this to be extra careful given that PID 1 might
need to spawn the logging daemon as response to PID 1's own log messages
and we really should avoid a deadlock in that case.

As it turns out this causes loss of too many messages, hence make the
socket blocking again, however put a time limit on it to avoid unbounded
deadlocks in the unlikely case they happen.

9 years agoremove systemd-timestamp from sources
Dave Reisner [Tue, 23 Jul 2013 15:26:58 +0000 (11:26 -0400)]
remove systemd-timestamp from sources

No sense in keeping this around if support for reading RD_TIMESTAMP has
been removed.

9 years agoremove left-over initrd time stamp handling
Kay Sievers [Tue, 23 Jul 2013 10:25:32 +0000 (12:25 +0200)]
remove left-over initrd time stamp handling

9 years agoman: Fix copy&paste error
Michael Biebl [Tue, 23 Jul 2013 03:03:17 +0000 (05:03 +0200)]
man: Fix copy&paste error

9 years agoREADME Bump minimum required version of kmod
Michael Biebl [Tue, 23 Jul 2013 02:54:40 +0000 (04:54 +0200)]
README Bump minimum required version of kmod

See edeb68c53f1cdc452016b4c8512586a70b1262e3.

9 years agobuild-sys: prepare 206 v206
Lennart Poettering [Mon, 22 Jul 2013 23:32:36 +0000 (01:32 +0200)]
build-sys: prepare 206

9 years agoNEWS: fix mistake
Maciej Wereski [Mon, 22 Jul 2013 09:02:50 +0000 (11:02 +0200)]
NEWS: fix mistake

9 years agobus: update for kdbus changes
Kay Sievers [Mon, 22 Jul 2013 21:00:31 +0000 (23:00 +0200)]
bus: update for kdbus changes

9 years agoTODO: update
Kay Sievers [Mon, 22 Jul 2013 18:17:26 +0000 (20:17 +0200)]
TODO: update

9 years agokmod-static-nodes: remain after exit
Tom Gundersen [Mon, 22 Jul 2013 15:10:15 +0000 (17:10 +0200)]
kmod-static-nodes: remain after exit

9 years agosystemd-tmpfiles-setup-dev: remain after exit
Tom Gundersen [Mon, 22 Jul 2013 14:59:26 +0000 (16:59 +0200)]
systemd-tmpfiles-setup-dev: remain after exit

Without this, tmpfiles-setpu-dev  would be re-run if any other service,
which pulls in, was started after setup-dev was finished
and before was active.

9 years agoNEWS: prepare half a NEWS file for upcoming 206
Lennart Poettering [Sun, 21 Jul 2013 22:16:17 +0000 (00:16 +0200)]
NEWS: prepare half a NEWS file for upcoming 206

9 years agoman: wording and grammar updates
Jan Engelhardt [Sun, 21 Jul 2013 04:53:14 +0000 (06:53 +0200)]
man: wording and grammar updates

This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.

9 years agorules: net, tty description - ask hwdb explicitly for pci data
Kay Sievers [Sun, 21 Jul 2013 14:32:43 +0000 (16:32 +0200)]
rules: net, tty description - ask hwdb explicitly for pci data

9 years agoshared: fix build on !x86
Shawn Landden [Sat, 20 Jul 2013 17:15:13 +0000 (10:15 -0700)]
shared: fix build on !x86

9 years agoman: udev - add section about hwdb
Kay Sievers [Sat, 20 Jul 2013 23:32:27 +0000 (01:32 +0200)]
man: udev - add section about hwdb

9 years agocore: correct dbus parameter direction
Zbigniew Jędrzejewski-Szmek [Sat, 20 Jul 2013 20:12:10 +0000 (16:12 -0400)]
core: correct dbus parameter direction

9 years agorules: drivers - always call kmod, even when a driver is bound to the device
Kay Sievers [Sat, 20 Jul 2013 12:29:12 +0000 (14:29 +0200)]
rules: drivers - always call kmod, even when a driver is bound to the device

On Sat, Jul 20, 2013 at 12:56 PM, Rafael J. Wysocki <> wrote:
> After a recent change present in 3.11-rc1 there is a driver, called processor,
> that can be bound to the CPU devices whose sysfs directories are located under
> /sys/devices/system/cpu/.  A side effect of this is that, after the driver has
> been bound to those devices, the kernel adds DRIVER=processor to ENV for CPU
> uevents and they don't match the default rule for autoloading modules matching
> DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
> any more.  However, there are some modules whose module aliases match specific
> CPU features through the modalias string and those modules should be loaded
> automatically if a compatible CPU is present.  Yet, with the processor driver
> bound to the CPU devices the above rule is not sufficient for that, so we need
> a new default udev rule allowing those modules to be autoloaded even if the
> CPU devices have drivers.

9 years agomake: Automake is complaining about .PRECIOUS being redefined
Holger Hans Peter Freyther [Thu, 18 Jul 2013 07:18:55 +0000 (09:18 +0200)]
make: Automake is complaining about .PRECIOUS being redefined

Yesterday I added test-suite.log as dependency to the .PRECIOUS
target. Automake is warning about this target being redefined
and from what I see there is no way I can stop the warning but
I can add the %MAKEFILE% as dependency.

automake warning: warning: user target '.PRECIOUS' defined here ...
/usr/share/automake-1.13/am/ ... overrides Automake target '.PRECIOUS' defined here

[zj: s/%MAKEFILE%/Makefile/ because %MAKEFILE% wasn't actually substituted properly.]

9 years agoman: also mention /run/log/journal in systemd-jouranld.service(8)
Zbigniew Jędrzejewski-Szmek [Fri, 19 Jul 2013 23:04:08 +0000 (19:04 -0400)]
man: also mention /run/log/journal in systemd-jouranld.service(8)

9 years agojournald: after the cgroup rework processes may be in both user and system units...
Lennart Poettering [Fri, 19 Jul 2013 17:52:30 +0000 (19:52 +0200)]
journald: after the cgroup rework processes may be in both user and system units at the same time

9 years agoman: update documentation of systemctl cgroup commands
Lennart Poettering [Fri, 19 Jul 2013 17:28:16 +0000 (19:28 +0200)]
man: update documentation of systemctl cgroup commands

9 years agoman: update documentation of slice units a bit
Lennart Poettering [Fri, 19 Jul 2013 17:16:47 +0000 (19:16 +0200)]
man: update documentation of slice units a bit

9 years agoman: update scope unit man page a bit
Lennart Poettering [Fri, 19 Jul 2013 17:04:17 +0000 (19:04 +0200)]
man: update scope unit man page a bit

9 years agoman: update pam_systemd documentation to current state of the code
Lennart Poettering [Fri, 19 Jul 2013 16:52:09 +0000 (18:52 +0200)]
man: update pam_systemd documentation to current state of the code

9 years agocore: update configuration directive list "systemd --dump-configuration-items" shows
Lennart Poettering [Fri, 19 Jul 2013 16:45:11 +0000 (18:45 +0200)]
core: update configuration directive list "systemd --dump-configuration-items" shows

9 years agoman: list scope and slice units in systemd(1)
Lennart Poettering [Fri, 19 Jul 2013 16:44:33 +0000 (18:44 +0200)]
man: list scope and slice units in systemd(1)

9 years agoman: document sd_pid_get_slice() call of libsystemd-login
Lennart Poettering [Fri, 19 Jul 2013 16:10:12 +0000 (18:10 +0200)]
man: document sd_pid_get_slice() call of libsystemd-login

9 years agoman: a few corrections to the machinectl man page
Lennart Poettering [Fri, 19 Jul 2013 16:00:21 +0000 (18:00 +0200)]
man: a few corrections to the machinectl man page

9 years agoman: update systemd-nspawn regarding new --slice= logic
Lennart Poettering [Fri, 19 Jul 2013 15:55:52 +0000 (17:55 +0200)]
man: update systemd-nspawn regarding new --slice= logic

9 years agoman: extend systemd-run man page a little
Lennart Poettering [Fri, 19 Jul 2013 15:51:26 +0000 (17:51 +0200)]
man: extend systemd-run man page a little

9 years agoman: drop the old cgroup settings from the man pages
Lennart Poettering [Fri, 19 Jul 2013 15:23:10 +0000 (17:23 +0200)]
man: drop the old cgroup settings from the man pages

9 years agotmpfiles: Fix memory leak in parse_line()
Maciej Wereski [Fri, 19 Jul 2013 13:43:12 +0000 (15:43 +0200)]
tmpfiles: Fix memory leak in parse_line()

9 years agoudev: fix two trivial memleaks in error path
Zbigniew Jędrzejewski-Szmek [Thu, 18 Jul 2013 23:36:55 +0000 (19:36 -0400)]
udev: fix two trivial memleaks in error path

Based-on-a-patch-by: Ian Stakenvicius <>
9 years agoman: Fix example to use the new --boot syntax
Jan Janssen [Fri, 19 Jul 2013 11:54:51 +0000 (13:54 +0200)]
man: Fix example to use the new --boot syntax

9 years agonspawn: Reorder includes to fix compilation
Jesper Larsen [Fri, 19 Jul 2013 09:40:44 +0000 (11:40 +0200)]
nspawn: Reorder includes to fix compilation

Commit 2e996f4d4b642c5682c608c9692ad2ffae398ab2 added an include
of linux/netlink.h

This kernel header is not self contained in the linux 2.6 kernel
which breaks compilation with an unknown type sa_family_t

A workaround is to include linux/netlink.h after sys/socket.h

9 years agocore: add %v specifier
Zbigniew Jędrzejewski-Szmek [Fri, 19 Jul 2013 06:45:27 +0000 (02:45 -0400)]
core: add %v specifier

9 years agoman: document Slice= setting (and other fixes)
Lennart Poettering [Fri, 19 Jul 2013 02:10:06 +0000 (04:10 +0200)]
man: document Slice= setting (and other fixes)

9 years agomachined: run machined at minimal capabilities
Lennart Poettering [Fri, 19 Jul 2013 01:49:24 +0000 (03:49 +0200)]
machined: run machined at minimal capabilities

9 years agounits: add references to bus API documentation to logind+machined
Lennart Poettering [Fri, 19 Jul 2013 01:49:07 +0000 (03:49 +0200)]
units: add references to bus API documentation to logind+machined

9 years agoupdate TODO
Lennart Poettering [Fri, 19 Jul 2013 01:48:23 +0000 (03:48 +0200)]
update TODO

9 years agomachined: correct how some properties are exported on the bus
Lennart Poettering [Fri, 19 Jul 2013 00:47:05 +0000 (02:47 +0200)]
machined: correct how some properties are exported on the bus

9 years agoman: add reference to new machined bus API documentation in the wiki
Lennart Poettering [Fri, 19 Jul 2013 00:46:27 +0000 (02:46 +0200)]
man: add reference to new machined bus API documentation in the wiki

9 years agoTODO: update
Kay Sievers [Thu, 18 Jul 2013 21:07:37 +0000 (23:07 +0200)]
TODO: update

9 years agotests: skip tests when executed without privileges but which require them
Kay Sievers [Thu, 18 Jul 2013 21:05:29 +0000 (23:05 +0200)]
tests: skip tests when executed without privileges but which require them

9 years agoutil: add split_pair() for splitting foo=bar strings
Lennart Poettering [Thu, 18 Jul 2013 18:22:29 +0000 (20:22 +0200)]
util: add split_pair() for splitting foo=bar strings

9 years agojournal: Leave server_dispatch_message early when Storage is none
Holger Hans Peter Freyther [Thu, 18 Jul 2013 12:45:12 +0000 (14:45 +0200)]
journal: Leave server_dispatch_message early when Storage is none

When using Storage=none there is no point in collecting all the
information just to throw them away. After this change journald
consumes a lot less CPU time when only forwarding messages.

9 years agosystemctl: option to list units by state
Maciej Wereski [Thu, 18 Jul 2013 11:24:12 +0000 (13:24 +0200)]
systemctl: option to list units by state

This allows to show only units with specified LOAD or SUB or ACTIVE state.

9 years agojournalctl: add ”short-iso” output format with verbose ISO8601 timestamps
Tomasz Torcz [Thu, 18 Jul 2013 08:21:45 +0000 (10:21 +0200)]
journalctl: add ”short-iso” output format with verbose ISO8601 timestamps

2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)

9 years agorules: keyboard - use builtin command
Kay Sievers [Thu, 18 Jul 2013 12:40:42 +0000 (14:40 +0200)]
rules: keyboard - use builtin command

9 years agojournalctl: fix signedness warning and boot-id syntax check
Zbigniew Jędrzejewski-Szmek [Thu, 18 Jul 2013 12:07:01 +0000 (08:07 -0400)]
journalctl: fix signedness warning and boot-id syntax check

9 years agotest: Keep the test-suite.log around in case of a test failure
Holger Hans Peter Freyther [Wed, 17 Jul 2013 14:29:55 +0000 (16:29 +0200)]
test: Keep the test-suite.log around in case of a test failure

The addition of .DELETE_ON_ERROR will lead to the removal of the
test-suite.log in case of a test failure. Mark the rule as PRECIOUS
to keep that file around.