chiark / gitweb /
7 years agounits: drop [Install] section from and
Lennart Poettering [Fri, 17 Jan 2014 19:27:35 +0000 (20:27 +0100)]
units: drop [Install] section from and

They were supposed to make it easy to make the a symlink
to these targets, but this was never advertised and we have a better
command for this now in "systemctl set-default". Since the install
section makes the output of "systemctl list-unit-files" confusing (since
it makes the units appear as "disabled"), let's drop the sections.

7 years agoUpdate TODO
Lennart Poettering [Fri, 17 Jan 2014 18:59:50 +0000 (19:59 +0100)]
Update TODO

7 years agosd-resolve: rename structs to fit coding-style e.g 'struct MixedCase'
Daniel Buch [Wed, 15 Jan 2014 17:21:30 +0000 (18:21 +0100)]
sd-resolve: rename structs to fit coding-style e.g 'struct MixedCase'

lets get this right once, and if not for all, atleast for now :)

So comments and input about nameing is very welcome.


7 years agosd-resolve: get rid of _t post-fixes for sd_ objects
Daniel Buch [Wed, 15 Jan 2014 17:21:29 +0000 (18:21 +0100)]
sd-resolve: get rid of _t post-fixes for sd_ objects

We dont want _t prefixes, right?

7 years agobuild: Skip .busname generator when kdbus is off
Umut Tezduyar Lindskog [Fri, 17 Jan 2014 12:34:35 +0000 (13:34 +0100)]
build: Skip .busname generator when kdbus is off

7 years agobus: Fix read_word_le() function
Lukasz Skalski [Fri, 17 Jan 2014 17:11:07 +0000 (18:11 +0100)]
bus: Fix read_word_le() function

7 years agoupdate TODO
Lennart Poettering [Tue, 5 Nov 2013 10:53:09 +0000 (11:53 +0100)]
update TODO

7 years agolibsystemd: rename LIBSYSTEMD_BUS to LIBSYSTEMD
Tom Gundersen [Fri, 17 Jan 2014 12:43:25 +0000 (13:43 +0100)]
libsystemd: rename LIBSYSTEMD_BUS to LIBSYSTEMD

7 years agobus: update kdbus.h (ABI break)
Kay Sievers [Fri, 17 Jan 2014 00:29:48 +0000 (01:29 +0100)]
bus: update kdbus.h (ABI break)

7 years agonetworkd: resolv.conf - extend the comment a bit
Tom Gundersen [Thu, 16 Jan 2014 19:20:08 +0000 (20:20 +0100)]
networkd: resolv.conf - extend the comment a bit

7 years agosd-dhcp-client: minor style fixes
Tom Gundersen [Thu, 16 Jan 2014 18:55:25 +0000 (19:55 +0100)]
sd-dhcp-client: minor style fixes

Also introduce a cleanup macro for DHCPLease

7 years agosd-dhcp-client: refactor DNS support
Tom Gundersen [Thu, 16 Jan 2014 18:32:22 +0000 (19:32 +0100)]
sd-dhcp-client: refactor DNS support

Rather than keeping an array of pointers to addresses, just keep an array of addresses.

7 years agosd-dhcp-client/networkd: add transient hostname support
Tom Gundersen [Mon, 13 Jan 2014 22:48:28 +0000 (23:48 +0100)]
sd-dhcp-client/networkd: add transient hostname support

7 years agonetworkd: dhcp - only set the MTU option once
Tom Gundersen [Thu, 16 Jan 2014 15:50:19 +0000 (16:50 +0100)]
networkd: dhcp - only set the MTU option once

Only set MTU request when creating the dhcp client, not every time it is restarted.

7 years agonetworkd: link - only save original MTU when necessary
Tom Gundersen [Thu, 16 Jan 2014 14:09:57 +0000 (15:09 +0100)]
networkd: link - only save original MTU when necessary

7 years agonetworkd: improve logging
Tom Gundersen [Thu, 16 Jan 2014 13:59:26 +0000 (14:59 +0100)]
networkd: improve logging

7 years agobus: fix issue with reference counting
Zbigniew Jędrzejewski-Szmek [Thu, 16 Jan 2014 06:15:17 +0000 (01:15 -0500)]
bus: fix issue with reference counting

b7fc42e03 introduced a regression.

7 years agobuild-sys: increase valgrind stack limit so all tests pass again
Zbigniew Jędrzejewski-Szmek [Tue, 14 Jan 2014 19:27:48 +0000 (14:27 -0500)]
build-sys: increase valgrind stack limit so all tests pass again

7 years agobus: break reference cycle between bus and messages
Zbigniew Jędrzejewski-Szmek [Tue, 14 Jan 2014 19:26:37 +0000 (14:26 -0500)]
bus: break reference cycle between bus and messages

Previously (6ee4f99 bus: break reference cycle between bus and
messages) I committed the test code, but not the actual fix :)

7 years agobuild-sys: fix --enable-dbus
Chengwei Yang [Wed, 15 Jan 2014 05:06:00 +0000 (13:06 +0800)]
build-sys: fix --enable-dbus

The incorrect shell code of AS_IF always get false value, so it always
build without dbus though build with "--enable-dbus" explicitely.

7 years agosd-dhcp-client/networkd: add interface MTU support
Tom Gundersen [Mon, 13 Jan 2014 22:07:59 +0000 (23:07 +0100)]
sd-dhcp-client/networkd: add interface MTU support

7 years agosd-rtnl: only alter link flags when reqeusted to
Tom Gundersen [Thu, 16 Jan 2014 00:34:27 +0000 (01:34 +0100)]
sd-rtnl: only alter link flags when reqeusted to

7 years agosd-dhcp-client: fix memory corruption
Tom Gundersen [Thu, 16 Jan 2014 00:40:23 +0000 (01:40 +0100)]
sd-dhcp-client: fix memory corruption

7 years agoevent: extend priority raneg to 64bit
Lennart Poettering [Wed, 15 Jan 2014 08:08:20 +0000 (16:08 +0800)]
event: extend priority raneg to 64bit

The kdbus prioq logic will use 64bit prios too, so let's keep this
similar in style. Using 64bit here has the advantage, that pointers and
pretty much anything else can be mapped naturally to priorities if so

7 years agosystemctl: introduce new "import-environment" command
Lennart Poettering [Wed, 15 Jan 2014 07:21:29 +0000 (15:21 +0800)]
systemctl: introduce new "import-environment" command

This may be used in graphical session start-up scripts to upload
environment variables such as $DISPLAY into the systemd manager easily.

7 years agologind: get rid of X11 display socket symlink
Lennart Poettering [Wed, 15 Jan 2014 07:19:17 +0000 (15:19 +0800)]
logind: get rid of X11 display socket symlink

X11 never made use of it anyway and it's probably better to just push
$DISPLAY into the systemd daemon from gnome-session (or equivalent
program) than to change libX11 to look for this socket. In particular
since we won't need this for Wayland anyway and we shouldn't add
infrastructure for stuff that's on its way out anyway.

7 years agoshell-completion: remove load from systemctl
Lukas Nykryn [Wed, 15 Jan 2014 14:31:07 +0000 (15:31 +0100)]
shell-completion: remove load from systemctl

7 years agoRevert "Revert "coredumpctl: in case of error free pattern after print""
Lukas Nykryn [Wed, 15 Jan 2014 11:46:44 +0000 (12:46 +0100)]
Revert "Revert "coredumpctl: in case of error free pattern after print""

In the case of the error set_consume will free the pointer 'pattern'
which is later used in log_error. Either we should stop priniting that
or use simple set_put and free pattern manually.

This reverts commit ece6b8fd5bbc1fee16f652e680e3033f2f3efc4a.

7 years agosd-resolv: rename to sd-resolve
Tom Gundersen [Tue, 14 Jan 2014 17:18:43 +0000 (18:18 +0100)]
sd-resolv: rename to sd-resolve

Lennart pointed out that we were misspelling 'resolve'. Let's not repeat the mistakes of 'umount'
and 'resolv.conf'.

7 years agoREADME: list CONFIG_FHANDLE in main section
Kay Sievers [Tue, 14 Jan 2014 14:58:04 +0000 (22:58 +0800)]
README: list CONFIG_FHANDLE in main section

7 years agoreadme: CONFIG_FHANDLE is a requirement
Umut Tezduyar Lindskog [Tue, 14 Jan 2014 14:26:54 +0000 (15:26 +0100)]
readme: CONFIG_FHANDLE is a requirement

7 years agoRevert "coredumpctl: in case of error free pattern after print"
Zbigniew Jędrzejewski-Szmek [Tue, 14 Jan 2014 14:49:10 +0000 (09:49 -0500)]
Revert "coredumpctl: in case of error free pattern after print"

This reverts commit cf50a55277ee432e1217ad894afcbd9a664ff96c.

set_consume frees on error.

7 years agocoredumpctl: in case of error free pattern after print
Lukas Nykryn [Tue, 14 Jan 2014 14:40:16 +0000 (15:40 +0100)]
coredumpctl: in case of error free pattern after print

7 years agosd-resolv: remove left-over comment
Tom Gundersen [Tue, 14 Jan 2014 12:51:18 +0000 (13:51 +0100)]
sd-resolv: remove left-over comment

We are anyway breaking the API by renaming everything, so that is not a concern.

7 years agosd-resolv: require SOCK_CLOEXEC
Tom Gundersen [Tue, 14 Jan 2014 12:50:35 +0000 (13:50 +0100)]
sd-resolv: require SOCK_CLOEXEC

7 years agosd-resolv: rename old asyncns variables
Daniel Buch [Tue, 14 Jan 2014 10:46:49 +0000 (11:46 +0100)]
sd-resolv: rename old asyncns variables

7 years agosd_resolv: Rename structs- and function names to sd_resolv
Daniel Buch [Tue, 14 Jan 2014 10:46:48 +0000 (11:46 +0100)]
sd_resolv: Rename structs- and function names to sd_resolv

7 years agobus: update kdbus.h (ABI break)
Kay Sievers [Tue, 14 Jan 2014 12:15:25 +0000 (20:15 +0800)]
bus: update kdbus.h (ABI break)

7 years agobus: update kdbus.h (ABI break)
Kay Sievers [Tue, 14 Jan 2014 08:10:08 +0000 (16:10 +0800)]
bus: update kdbus.h (ABI break)

7 years agonetworkd: DHCPv4 - allow opting out of using DNS servers
Tom Gundersen [Mon, 13 Jan 2014 20:28:53 +0000 (21:28 +0100)]
networkd: DHCPv4 - allow opting out of using DNS servers

Setting UseDNS=no will ignore any received DNS servers.

7 years agolibsystemd-dns: merge into libsystemd
Tom Gundersen [Mon, 13 Jan 2014 20:03:28 +0000 (21:03 +0100)]
libsystemd-dns: merge into libsystemd

Also rename sd-dns -> sd-resolv.

7 years agolibsystemd-rtnl: merge into libsystemd
Tom Gundersen [Mon, 13 Jan 2014 19:14:44 +0000 (20:14 +0100)]
libsystemd-rtnl: merge into libsystemd

7 years agolibsystemd-dhcp: merge into libsystemd
Tom Gundersen [Mon, 13 Jan 2014 18:12:16 +0000 (19:12 +0100)]
libsystemd-dhcp: merge into libsystemd

7 years agolibsystemd-bus: rename to libsystemd
Tom Gundersen [Mon, 13 Jan 2014 16:30:51 +0000 (17:30 +0100)]
libsystemd-bus: rename to libsystemd

Documentation was updated to refer to either 'libsystemd' or 'sd-bus' in place
of libsystemd-bus.

7 years agoTODO: update
Kay Sievers [Mon, 13 Jan 2014 02:51:26 +0000 (10:51 +0800)]
TODO: update

7 years agosd-dns: coding style cleanup
Daniel Buch [Sun, 12 Jan 2014 18:42:33 +0000 (19:42 +0100)]
sd-dns: coding style cleanup

7 years agonetworkd: fix wording
Tom Gundersen [Sun, 12 Jan 2014 14:44:40 +0000 (15:44 +0100)]
networkd: fix wording

7 years agoTODO: update rtnl/network sections
Tom Gundersen [Sat, 11 Jan 2014 20:19:10 +0000 (20:19 +0000)]
TODO: update rtnl/network sections

7 years agonetworkd: generate resolv.conf
Tom Gundersen [Sun, 5 Jan 2014 22:01:10 +0000 (23:01 +0100)]
networkd: generate resolv.conf

This adds support to generate a basic resolv.conf in /run/systemd/network.
This file will not take any effect unless a symlink is created from

Nameservers received over DHCP takes precedence over statically configured ones.

Note: /etc/resolv.conf is severely limited, so in the future we will likely
rather provide a much more powerfull nss plugin (or something to that effect),
but this should allow current users to function without any loss of

7 years agonetworkd: bridge - remove redundant state
Tom Gundersen [Sat, 11 Jan 2014 20:20:14 +0000 (20:20 +0000)]
networkd: bridge - remove redundant state

We will not insist on getting the reply from rtnl that the bridge
was created before considering the bridge ready, as we will be
notified about that via udev. We will listen for the rtnl response
however, in case the creation of the bridge failed.

7 years agonetworkd: don't automatically reload config at runtime
Tom Gundersen [Sat, 11 Jan 2014 20:16:13 +0000 (20:16 +0000)]
networkd: don't automatically reload config at runtime

We don't know if the config will be consistent, so do as systemd itself and only
load config when the daemon starts (and possibly, in the future, when explicitly requested).

7 years agonetworkd: improve logging a bit
Tom Gundersen [Sun, 12 Jan 2014 14:24:11 +0000 (15:24 +0100)]
networkd: improve logging a bit

7 years agobus-proxyd: add some more debugging
Tom Gundersen [Fri, 10 Jan 2014 20:40:19 +0000 (20:40 +0000)]
bus-proxyd: add some more debugging

Make sure we print a message when exiting with an error.

7 years agocore: don't allow setting NOTIFY_SOCKET and similar env vars we need ourselves via...
Lennart Poettering [Sun, 12 Jan 2014 12:10:40 +0000 (20:10 +0800)]
core: don't allow setting NOTIFY_SOCKET and similar env vars we need ourselves via SetEnvironment bus calls

We just quietly eat them up, so that simple environment importing still
works without error.

7 years agoupdate TODO
Lennart Poettering [Sun, 12 Jan 2014 12:10:33 +0000 (20:10 +0800)]
update TODO

7 years agocore: clean up environment block for --user instances a bit
Lennart Poettering [Sun, 12 Jan 2014 11:39:56 +0000 (19:39 +0800)]
core: clean up environment block for --user instances a bit

7 years agobus: add test case for signature type
Lennart Poettering [Sun, 12 Jan 2014 11:15:29 +0000 (19:15 +0800)]
bus: add test case for signature type

7 years agoman: add busctl(1)
Zbigniew Jędrzejewski-Szmek [Sun, 12 Jan 2014 04:44:34 +0000 (23:44 -0500)]
man: add busctl(1)

7 years agobus: properly handle EOF error conditions in proxyd
Lennart Poettering [Sun, 12 Jan 2014 02:56:40 +0000 (10:56 +0800)]
bus: properly handle EOF error conditions in proxyd

EOF is not an error so we should not print an error message about it.

7 years agojournald: do not free space when disk space runs low
Zbigniew Jędrzejewski-Szmek [Wed, 13 Nov 2013 05:42:22 +0000 (00:42 -0500)]
journald: do not free space when disk space runs low

Before, journald would remove journal files until both MaxUse= and
KeepFree= settings would be satisfied. The first one depends (if set
automatically) on the size of the file system and is constant.  But
the second one depends on current use of the file system, and a spike
in disk usage would cause journald to delete journal files, trying to
reach usage which would leave 15% of the disk free. This behaviour is
surprising for the user who doesn't expect his logs to be purged when
disk usage goes above 85%, which on a large disk could be some
gigabytes from being full. In addition attempting to keep 15% free
provides an attack vector where filling the disk sufficiently disposes
of almost all logs.

Instead, obey KeepFree= only as a limit on adding additional files.
When replacing old files with new, ignore KeepFree=. This means that
if journal disk usage reached some high point that at some later point
start to violate the KeepFree= constraint, journald will not add files
to go above this point, but it will stay (slightly) below it. When
journald is restarted, it forgets the previous maximum usage value,
and sets the limit based on the current usage, so if disk remains to
be filled, journald might use one journal-file-size less on each
restart, if restarts happen just after rotation. This seems like a
reasonable compromise between implementation complexity and robustness.

7 years agogpt-auto-generator: use EBADSLT code when unable to detect partition type
Zbigniew Jędrzejewski-Szmek [Sat, 11 Jan 2014 21:45:29 +0000 (16:45 -0500)]
gpt-auto-generator: use EBADSLT code when unable to detect partition type

ENODEV suggests that something is missing, which is be misleading

7 years agogpt-auto-generator: skip nonexistent devices
Łukasz Stelmach [Tue, 7 Jan 2014 14:00:22 +0000 (15:00 +0100)]
gpt-auto-generator: skip nonexistent devices

The devices we work with have eMMC chips for storage. The chips
provide four "hardware" partitions.  The first is /dev/mmcblk0, it
takes almost whole space and holds a GPT with several real partitions
(/dev/mmcblk0p?). Then there are three block devices (mmcblk0boot0,
mmcblk0boot1, rpmb) that are part of the same hardware as mmcblk0 that
are presented by the kernel as children of the latter. That relationship
makes gpt-auto-generator try to peek them but since they are not GPT
partitions blkid_do_safeprobe() returns -2 making verify_gpt_parition()
function return -ENODEV.

7 years agoycm: autocompose flags from the Makefile
Dave Reisner [Sun, 24 Nov 2013 13:56:56 +0000 (08:56 -0500)]
ycm: autocompose flags from the Makefile

This should hopefully be self-maintaining.

7 years agopam: skip DBUS_SESSION_BUS_ADDRESS export when kdbus is not active
Kay Sievers [Sat, 11 Jan 2014 17:18:41 +0000 (01:18 +0800)]
pam: skip DBUS_SESSION_BUS_ADDRESS export when kdbus is not active

7 years agomake socket_instantiate_service use cleanup gcc attribute
Michael Scherer [Sat, 11 Jan 2014 16:20:57 +0000 (17:20 +0100)]
make socket_instantiate_service use cleanup gcc attribute

7 years agobus: fix length calculation when serializing SD_BUS_TYPE_SIGNATURE
Kay Sievers [Sat, 11 Jan 2014 16:30:49 +0000 (00:30 +0800)]
bus: fix length calculation when serializing SD_BUS_TYPE_SIGNATURE

7 years agocore: fix unused variable
Zbigniew Jędrzejewski-Szmek [Sat, 11 Jan 2014 14:52:48 +0000 (09:52 -0500)]
core: fix unused variable

7 years agonetwork: use GNU-ism to simplify macros
Zbigniew Jędrzejewski-Szmek [Sat, 11 Jan 2014 14:42:55 +0000 (09:42 -0500)]
network: use GNU-ism to simplify macros

Thanks David!

7 years agojournalctl: allow globbing in --unit and --user-unit
Zbigniew Jędrzejewski-Szmek [Sun, 29 Dec 2013 00:47:36 +0000 (19:47 -0500)]
journalctl: allow globbing in --unit and --user-unit

This is a continuation of e3e0314b systemctl: allow globbing in commands
which take multiple unit names.

Multiple patterns can be specified, as separate arguments, or as one argument
with patterns seperated by commas.

If patterns are given, at least one unit must be matched (by any of the patterns).
This is different behaviour than systemctl, but here it is necessary because
otherwise anything would be matched, which is unlikely to be the intended

7 years agojournal: fix access to munmapped memory in sd_journal_enumerate_unique
Zbigniew Jędrzejewski-Szmek [Sun, 29 Dec 2013 00:33:23 +0000 (19:33 -0500)]
journal: fix access to munmapped memory in sd_journal_enumerate_unique

sd_j_e_u needs to keep a reference to an object while comparing it
with possibly duplicate objects in other files. Because the size of
mmap cache is limited, with enough files and object to compare to,
at some point the object being compared would be munmapped, resulting
in a segmentation fault.

Fix this issue by turning keep_always into a reference count that can
be increased and decreased. Other callers which set keep_always=true
are unmodified: their references are never released but are ignored
when the whole file is closed, which happens at some point. keep_always
is increased in sd_j_e_u and later on released.

7 years agosd-dns: simplify headers
Tom Gundersen [Sat, 11 Jan 2014 14:59:56 +0000 (14:59 +0000)]
sd-dns: simplify headers

As noted by Lennart: HAVE_CONFIG_H is done implicitly and sys/prctl.h is

7 years agosd-dns: update/add license texts
Tom Gundersen [Sat, 11 Jan 2014 14:54:22 +0000 (14:54 +0000)]
sd-dns: update/add license texts

7 years agosd-dns: cleanup public header
Tom Gundersen [Sat, 11 Jan 2014 14:51:30 +0000 (14:51 +0000)]
sd-dns: cleanup public header

Don't include internal headers
Update license text

7 years agosd-dns: initial commit
Daniel Buch [Mon, 6 Jan 2014 12:41:59 +0000 (13:41 +0100)]
sd-dns: initial commit

Origin: <>

[tomegun: renamed some more files asyncns -> sd-dns and moved to libsystemd-bus as
requested by Lennart]

7 years agoudev/net_id: Introduce predictable network names for Linux on System z
Hendrik Brueckner [Thu, 9 Jan 2014 10:28:12 +0000 (11:28 +0100)]
udev/net_id: Introduce predictable network names for Linux on System z

Use the bus-ID to create predicatable devices names for network interfaces
on Linux on System z instances.  The bus-ID identifies a device in the s390
channel subsystem.

Network interfaces of device type Ethernet are named as:
    enccw0.0.1234    (13 characters)
up to
    enccwff.7.ffff   (14 characters)

CTC network devices of device type SLIP, use a different prefix as follows:
    slccw0.0.1234    (13 characters)

See also Red Hat Bugzilla:
[tomegun: typical problem of netdevs switching names between reboots.]

7 years agohwdb: Add support for Toshiba Satellite P75-A7200 keyboard
Unai Uribarri [Sat, 11 Jan 2014 14:19:41 +0000 (09:19 -0500)]
hwdb: Add support for Toshiba Satellite P75-A7200 keyboard

7 years agoRevert "bus: export bus address also when compiled without kdbus"
Kay Sievers [Fri, 10 Jan 2014 22:22:19 +0000 (06:22 +0800)]
Revert "bus: export bus address also when compiled without kdbus"

This reverts commit 9130f2128b64de19a3b7d6db7e0d371adfd296c2.

It's too early to do that. For now we should only "break" the
--enable-kdbus case, not the normal one.

7 years agoman: clarify sd_bus_e_get_errno with NULL arg
Zbigniew Jędrzejewski-Szmek [Fri, 10 Jan 2014 14:10:18 +0000 (09:10 -0500)]
man: clarify sd_bus_e_get_errno with NULL arg

7 years agobus: convert a bus error with NULL name into an errno of 0 in sd_bus_error_get_errno()
Lennart Poettering [Fri, 10 Jan 2014 05:35:12 +0000 (13:35 +0800)]
bus: convert a bus error with NULL name into an errno of 0 in sd_bus_error_get_errno()

7 years agoman: mention which variables will be expanded in ExecStart
Zbigniew Jędrzejewski-Szmek [Fri, 10 Jan 2014 03:23:32 +0000 (22:23 -0500)]
man: mention which variables will be expanded in ExecStart

7 years agocore: fix lack of notifications after reload
Zbigniew Jędrzejewski-Szmek [Fri, 10 Jan 2014 01:49:18 +0000 (20:49 -0500)]
core: fix lack of notifications after reload

7 years agotmpfiles: don't allow label_fix to print ENOENT when we want to ignore it
Lukas Nykryn [Thu, 9 Jan 2014 17:00:50 +0000 (18:00 +0100)]
tmpfiles: don't allow label_fix to print ENOENT when we want to ignore it

7 years agodelta: ensure that d_type will be set on every fs
Lukas Nykryn [Thu, 9 Jan 2014 15:43:00 +0000 (16:43 +0100)]
delta: ensure that d_type will be set on every fs

7 years agobuild-sys: fix distcheck
Zbigniew Jędrzejewski-Szmek [Thu, 9 Jan 2014 03:34:59 +0000 (22:34 -0500)]
build-sys: fix distcheck

7 years agonetworkd: print the received DHCPv4 address and gateway
Zbigniew Jędrzejewski-Szmek [Thu, 9 Jan 2014 03:04:26 +0000 (22:04 -0500)]
networkd: print the received DHCPv4 address and gateway

It seems that networkd stores in_addr.s_addr contents in reverse
order (little-endian, not network order). This is a bit confusing,
but sd_rtnl evidently likes this order.

7 years agonetworkd: use structured logging for links and bridges
Zbigniew Jędrzejewski-Szmek [Thu, 9 Jan 2014 01:42:38 +0000 (20:42 -0500)]
networkd: use structured logging for links and bridges

7 years agoNo need to canonicalize fixed paths
Zbigniew Jędrzejewski-Szmek [Wed, 8 Jan 2014 22:41:41 +0000 (17:41 -0500)]
No need to canonicalize fixed paths

7 years agoImprove messages about user mode a bit
Zbigniew Jędrzejewski-Szmek [Wed, 8 Jan 2014 22:20:45 +0000 (17:20 -0500)]
Improve messages about user mode a bit

7 years agonspawn: do not invoke RegisterMachine on machined from inside the new PID namespace
Lennart Poettering [Thu, 9 Jan 2014 00:42:57 +0000 (08:42 +0800)]
nspawn: do not invoke RegisterMachine on machined from inside the new PID namespace

On kdbus user credentials are not translated across PID namespaces, but
simply invalidated if sender and receiver namespaces don't match. This
makes it impossible to properly authenticate requests from different PID
namespaces (which is probably a good thing). Hence, register the machine
in the parent and not the client and properly synchronize this.

7 years agobus: make the bus driver support the driver interface under both / and /org/freedeskt...
Lennart Poettering [Thu, 9 Jan 2014 00:19:22 +0000 (08:19 +0800)]
bus: make the bus driver support the driver interface under both / and /org/freedesktop/DBus

Some clients apparently use the "/" path instead of
"/org/freedesktop/DBus". dbus-daemon didn't care, so we need to support

7 years agologind: wait for the user service to finish startup before completing login attempt
Lennart Poettering [Wed, 8 Jan 2014 22:45:38 +0000 (06:45 +0800)]
logind: wait for the user service to finish startup before completing login attempt

7 years agodriverd: fix use-after-free error when maintaining match lists
Lennart Poettering [Wed, 8 Jan 2014 15:06:48 +0000 (23:06 +0800)]
driverd: fix use-after-free error when maintaining match lists

7 years agoRevert "bus-driverd: do not track identical matches"
Kay Sievers [Wed, 8 Jan 2014 15:07:28 +0000 (23:07 +0800)]
Revert "bus-driverd: do not track identical matches"

This reverts commit 234e28aa1cd37dee597c719ac5ca004c6215d28c.

7 years agobus: export bus address also when compiled without kdbus
Mantas Mikulėnas [Wed, 8 Jan 2014 12:08:34 +0000 (14:08 +0200)]
bus: export bus address also when compiled without kdbus

It was removed from user@.service, so it should be added here.

7 years agobus: use existing macros from def.h
Mantas Mikulėnas [Wed, 8 Jan 2014 12:08:33 +0000 (14:08 +0200)]
bus: use existing macros from def.h

7 years agobus-driverd: do not track identical matches
Kay Sievers [Wed, 8 Jan 2014 13:32:37 +0000 (21:32 +0800)]
bus-driverd: do not track identical matches

Identical matches are only one time in the hash map but multiple
times in the list; when removing, the hash will be empty but the
list still has entries.

Not adding dupicates to the list should keep us in sync and prevent
hitting the assert.

7 years agobus-driverd: properly reply to UpdateActivationEnvironment call
Kay Sievers [Wed, 8 Jan 2014 10:20:02 +0000 (18:20 +0800)]
bus-driverd: properly reply to UpdateActivationEnvironment call

7 years agodbus1-generator: install user version
Kay Sievers [Wed, 8 Jan 2014 10:10:39 +0000 (18:10 +0800)]
dbus1-generator: install user version

7 years agopam_systemd: export DBUS_SESSION_BUS_ADDRESS
Kay Sievers [Mon, 6 Jan 2014 04:00:16 +0000 (08:00 +0400)]
pam_systemd: export DBUS_SESSION_BUS_ADDRESS

7 years agobus: allow omitting quotes for values in match strings
Lennart Poettering [Wed, 8 Jan 2014 10:09:25 +0000 (18:09 +0800)]
bus: allow omitting quotes for values in match strings

dbus-daemon allows this, the dbus specification doesn't explicitly say
anything about it, so let's follow dbus-daemon on this.