release 119

diff --git a/ChangeLog b/ChangeLog
index fac6b5f2269f9ee0caa7ffef7ada5874de8ccdae..299e613ce76ef2ca3832397b1f9e9d76a10867b4 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,42 @@
+Summary of changes from v118 to v119
+============================================
+
+Anthony L. Awtrey (1):
+      do not skip RUN execution if device node removal fails
+
+Harald Hoyer (2):
+      rules: Fedora update
+      rules: do not set GROUP="disk" for scanners
+
+Jiri Slaby (1):
+      rules_generator: add missing write_net_rules unlock
+
+Karel Zak (2):
+      volume_id: fix UUID raw buffer usage
+      volume_id: fix typo in function documentation
+
+Kay Sievers (10):
+      switch mailing lists to linux-hotplug@vger.kernel.org
+      rules: remove tty rule which can never run because of an earlier "last_rule"
+      volume_id: update ext detection
+      selinux: set context for real file name not the temp name
+      hack to allow ATTR{block/*/uevent}="change"
+      rules_generator: add KERNEL=="<netifname>*" to generated rules
+      persistent device naming: also run on "change" event
+      test: add "subsystem" links to all devices
+      sysfs: depend on "subsystem" link
+      extend hack to allow TEST=="*/start"
+
+Matthias Schwarzott (1):
+      volume_id: respect LDFLAGS
+
+Neil Williams (1):
+      volume_id: add prefix=, exec_prefix=
+
+Roy Marples (1):
+      Makefile: do not require GNU install
+
+

 Summary of changes from v117 to v118
 ============================================
 
 Summary of changes from v117 to v118
 ============================================
 

diff --git a/Makefile b/Makefile
index 2fcc4247fad03e5ddce2f7b40242e2c13608c68e..a53bd1fe0a3fc8d2b901d783048e399e25935a1b 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -16,7 +16,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
 
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 #
 

-VERSION = 118
+VERSION = 119

 
 # set this to make use of syslog
 USE_LOG = true
 
 # set this to make use of syslog
 USE_LOG = true

diff --git a/README b/README
index f37c12a8e06b65008481afb5b2bc66220237e6a8..00acf97c27e5405b5974a4c373b80f8113e17767 100644 (file)
--- a/README
+++ b/README
@@ -9,16 +9,16 @@ Important Note:
   recommend to replace a distro's udev installation with the upstream version.
 
 Requirements:
   recommend to replace a distro's udev installation with the upstream version.
 
 Requirements:

-  - Version 2.6.15 of the Linux kernel for reliable operation of this release of
+  - Version 2.6.18 of the Linux kernel for reliable operation of this release of

     udev. The kernel may have a requirement on udev too, see Documentation/Changes
     in the kernel source tree for the actual dependency.
 
   - The kernel must have sysfs, unix domain sockets and networking enabled.
     (unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work,
     udev. The kernel may have a requirement on udev too, see Documentation/Changes
     in the kernel source tree for the actual dependency.
 
   - The kernel must have sysfs, unix domain sockets and networking enabled.
     (unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work,

-    but it is completely silly - don't complain if anything goes wrong.)
+    but it does not make any sense - don't complain if anything goes wrong.)

 
   - The proc filesystem must be mounted on /proc, the sysfs filesystem must
 
   - The proc filesystem must be mounted on /proc, the sysfs filesystem must

-    be mounted at /sys. No other location is supported by udev.
+    be mounted at /sys. No other locations are supported by udev.

 
 
 Operation:
 
 
 Operation:


@@ -45,7 +45,7 @@ Operation:
     /etc/udev/rules.d/ which make it possible to hook into the event
     processing to load required kernel modules and setup devices. For all
     devices the kernel exports a major/minor number, udev will create a
     /etc/udev/rules.d/ which make it possible to hook into the event
     processing to load required kernel modules and setup devices. For all
     devices the kernel exports a major/minor number, udev will create a

-    device node with the default kernel name or the one specified by a
+    device node with the default kernel name, or the one specified by a

     matching udev rule.
 
 
     matching udev rule.
 
 


@@ -71,22 +71,19 @@ Compile Options:
 
 Installation:
   - The install target intalls the udev binaries in the default locations,
 
 Installation:
   - The install target intalls the udev binaries in the default locations,

-    All at boot time reqired binaries will be installed in /lib/udev or /sbin.
+    All binaries will be installed in /lib/udev or /sbin.

 
   - The default location for scripts and binaries that are called from
 
   - The default location for scripts and binaries that are called from

-    rules is /lib/udev. Other packages who install udev rules, should use
+    rules is /lib/udev. Other packages who install udev rules, may use

     that directory too.
 
     that directory too.
 

-  - It is recommended to use the /lib/udev/devices directory to place
+  - It is recommended to use the /lib/udev/devices/ directory to place

     device nodes and symlinks in, which are copied to /dev at every boot.
     That way, nodes for broken subsystems or devices which can't be
     detected automatically by the kernel, will always be available.
 
     device nodes and symlinks in, which are copied to /dev at every boot.
     That way, nodes for broken subsystems or devices which can't be
     detected automatically by the kernel, will always be available.
 

-  - Copies of the rules files for the major distros are provided as examples
-    in the etc/udev directory.
-
-  - The persistent device naming links in /dev/disk/ are required by other
-    software that depends on the data udev has collected from the devices
+  - Default udev rules and persistent device naming rules are required by other
+    software that depends on the data udev collects from the devices,

     and should be installed by default with every udev installation.
 
 Please direct any comment/question/concern to the linux-hotplug-devel mailing list at:
     and should be installed by default with every udev installation.
 
 Please direct any comment/question/concern to the linux-hotplug-devel mailing list at:

diff --git a/RELEASE-NOTES b/RELEASE-NOTES
index 58564edcd8d2acb7bcedd6f788fdfd9fc3ab982b..9446a68b3c6c533b57a9fa6ee93e5a869f9314f9 100644 (file)
--- a/RELEASE-NOTES
+++ b/RELEASE-NOTES
@@ -1,3 +1,7 @@
+udev 119
+========
+Bugfixes.
+

 udev 118
 ========
 Bugfixes.
 udev 118
 ========
 Bugfixes.