X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=README;h=773bc5508d3bdf513b29e622b9067789abf36b06;hp=94a397936e5e7989a5e31ccfcfc44206512e1d28;hb=56c141eceb34041aa68bb9695c23eda165f47726;hpb=7d27ce1dc005b3972ab7ed77a86f6333c2f8ee9f diff --git a/README b/README index 94a397936..773bc5508 100644 --- a/README +++ b/README @@ -1,82 +1,57 @@ - -udev - a userspace implementation of devfs - -For more information on the design, and structure of this project, see the -files in the docs/ directory. - -To use: - -- You must be running a 2.6 version of the Linux kernel. - -- Make sure sysfs is mounted. udev will figure out where sysfs is mounted, but - the traditional place for it is at /sys. You can mount it by hand by running: - mount -t sysfs none /sys - -- Make sure you have the latest version of the linux-hotplug scripts. They are - available at linux-hotplug.sf.net or from your local kernel.org mirror at: - kernel.org/pub/linux/utils/kernel/hotplug/ - They are required in order for udev to work properly. - - If for some reason you do not install the hotplug scripts, you must tell the - kernel to point the hotplug binary at wherever you install udev at. This can - be done by: - echo "/sbin/udev" > /proc/sys/kernel/hotplug - -- Build the project: - make - - Note: - There are a number of different flags that you can use when building - udev. They are as follows: - prefix - set this to the default root that you want udev to be - installed into. This works just like the 'configure --prefix' - script does. Default value is ''. Only override this if you - really know what you are doing. - KLIBC - if set to 'true', udev is built and linked against the included - version of klibc. Default value is 'false'. - DEBUG - if set to 'true', debugging messages will be sent to the syslog - as udev is run. Default value is 'false'. - DBUS - if set to 'true', DBUS messages will be sent everytime udev - creates or removes a device node. This requires that DBUS - development headers and libraries be present on your system to - build properly. Default value is 'false'. - - So, if you want to build udev using klibc with debugging messages, you - would do: - make KLIBC=true DEBUG=true - - -- Install the project: - make install - - This will put the udev binary in /sbin, create the /udev and /etc/udev - directories, and place the udev configuration files in /etc/udev. You - will probably want to edit the namedev.* files to create custom naming - rules. More info on how the config files are set up are contained in - comments in the files, and is located in the documentation. - -- Add and remove devices from the system and marvel as nodes are created - and removed in /udev/ based on the device types. - -- If you later get sick of it, uninstall it: - make uninstall - - -Things are still quite rough, and it's a bit beyond proof of concept -code. Help is very much appreciated, see the TODO file for a list of -things left to be done. - -If you want to build using klibc, use the Makefile.klibc file: - - read the klibc/klibc/README file for how to set up the linux - symlink properly. - - make clean - - make -f Makefile.klibc -and marvel at the tiny binary you just created :) - -Any comment/questions/concerns please let me know. - -greg k-h -greg@kroah.com - - +udev - userspace device management + +For more information see the files in the docs/ directory. + +Important Note: + Integrating udev in the system has complex dependencies and differs from distro + to distro. All major distros depend on udev these days and the system may not + work without a properly installed version. The upstream udev project does not + recommend to replace a distro's udev installation with the upstream version. + +Requirements: + - Version 2.6.22 of the Linux kernel for reliable operation of this release of + udev. The kernel must not use the CONFIG_SYSFS_DEPRECATED* option. + + - The kernel must have sysfs, unix domain sockets and networking enabled. + Unix domain sockets (CONFIG_UNIX) as a loadable kernel module is not + supported. + + - The proc filesystem must be mounted on /proc/, the sysfs filesystem must + be mounted at /sys/. No other locations are supported by udev. + + - The system must have the following group names resolvable at udev startup: + disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, kmem. + Especially in LDAP setups, it is required, that getgrnam() is able to resolve + these group names with only the rootfs mounted, and while no network is + available. + +Operation: + Udev creates and removes device nodes in /dev/, based on events the kernel + sends out on device discovery or removal. + + - Very early in the boot process, the /dev/ directory should get a 'tmpfs' + filesystem mounted, which is populated from scratch by udev. Created nodes + or changed permissions will not survive a reboot, which is intentional. + + - The content of /lib/udev/devices/ directory which contains the nodes, + symlinks and directories, which are always expected to be in /dev, should + be copied over to the tmpfs mounted /dev, to provide the required nodes + to initialize udev and continue booting. + + - The old hotplug helper /sbin/hotplug should be disabled on bootup, before + actions like loading kernel modules are taken, which may cause a lot of + events. + + - The udevd daemon must be started on bootup to receive netlink uevents + from the kernel driver core. + + - All kernel events are matched against a set of specified rules in + /lib/udev/rules.d/ which make it possible to hook into the event + processing to load required kernel modules and setup devices. For all + devices the kernel exports a major/minor number, udev will create a + device node with the default kernel name, or the one specified by a + matching udev rule. + +Please direct any comment/question/concern to the linux-hotplug mailing list at: + linux-hotplug@vger.kernel.org