#include "install.h"
#include "logs-show.h"
#include "path-util.h"
+#include "socket-util.h"
static const char *arg_type = NULL;
static const char *arg_load_state = NULL;
ACTION_EXIT,
ACTION_SUSPEND,
ACTION_HIBERNATE,
+ ACTION_HYBRID_SLEEP,
ACTION_RUNLEVEL2,
ACTION_RUNLEVEL3,
ACTION_RUNLEVEL4,
TRANSPORT_POLKIT
} arg_transport = TRANSPORT_NORMAL;
static const char *arg_host = NULL;
-static bool arg_follow = false;
static unsigned arg_lines = 10;
static OutputMode arg_output = OUTPUT_SHORT;
static int daemon_reload(DBusConnection *bus, char **args);
static void halt_now(enum action a);
-static bool on_tty(void) {
- static int t = -1;
-
- /* Note that this is invoked relatively early, before we start
- * the pager. That means the value we return reflects whether
- * we originally were started on a tty, not if we currently
- * are. But this is intended, since we want colour and so on
- * when run in our own pager. */
-
- if (_unlikely_(t < 0))
- t = isatty(STDOUT_FILENO) > 0;
-
- return t;
-}
-
static void pager_open_if_enabled(void) {
- /* Cache result before we open the pager */
- on_tty();
-
if (arg_no_pager)
return;
}
#endif
+static const char *ansi_highlight(bool b) {
+
+ if (!on_tty())
+ return "";
+
+ return b ? ANSI_HIGHLIGHT_ON : ANSI_HIGHLIGHT_OFF;
+}
+
static const char *ansi_highlight_red(bool b) {
if (!on_tty())
} else
id_len = max_id_len;
- if (!arg_no_legend) {
- printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD",
- active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB");
- if (!arg_full && arg_no_pager)
- printf("%.*s\n", desc_len, "DESCRIPTION");
- else
- printf("%s\n", "DESCRIPTION");
- }
-
for (u = unit_infos; u < unit_infos + c; u++) {
char *e;
const char *on_loaded, *off_loaded;
if (!output_show_unit(u))
continue;
+ if (!n_shown && !arg_no_legend) {
+ printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD",
+ active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB");
+ if (!arg_full && arg_no_pager)
+ printf("%.*s\n", desc_len, "DESCRIPTION");
+ else
+ printf("%s\n", "DESCRIPTION");
+ }
+
n_shown++;
if (streq(u->load_state, "error")) {
}
if (!arg_no_legend) {
- printf("\nLOAD = Reflects whether the unit definition was properly loaded.\n"
- "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n"
- "SUB = The low-level unit activation state, values depend on unit type.\n"
- "JOB = Pending job for the unit.\n");
+ const char *on, *off;
+
+ if (n_shown) {
+ printf("\nLOAD = Reflects whether the unit definition was properly loaded.\n"
+ "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n"
+ "SUB = The low-level unit activation state, values depend on unit type.\n"
+ "JOB = Pending job for the unit.\n\n");
+ on = ansi_highlight(true);
+ off = ansi_highlight(false);
+ } else {
+ on = ansi_highlight_red(true);
+ off = ansi_highlight_red(false);
+ }
if (arg_all)
- printf("\n%u loaded units listed.\n"
- "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown);
+ printf("%s%u loaded units listed.%s\n"
+ "To show all installed unit files use 'systemctl list-unit-files'.\n",
+ on, n_shown, off);
else
- printf("\n%u loaded units listed. Pass --all to see loaded but inactive units, too.\n"
- "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown);
+ printf("%s%u loaded units listed.%s Pass --all to see loaded but inactive units, too.\n"
+ "To show all installed unit files use 'systemctl list-unit-files'.\n",
+ on, n_shown, off);
}
}
typedef struct WaitData {
Set *set;
+
+ char *name;
char *result;
} WaitData;
p = set_remove(d->set, (char*) path);
free(p);
- if (*result)
+ if (!isempty(result))
d->result = strdup(result);
+ if (!isempty(unit))
+ d->name = strdup(unit);
+
goto finish;
}
#ifndef LEGACY
}
static int wait_for_jobs(DBusConnection *bus, Set *s) {
- int r;
+ int r = 0;
WaitData d;
assert(bus);
zero(d);
d.set = s;
- if (!dbus_connection_add_filter(bus, wait_filter, &d, NULL)) {
- log_error("Failed to add filter.");
- r = -ENOMEM;
- goto finish;
- }
+ if (!dbus_connection_add_filter(bus, wait_filter, &d, NULL))
+ return log_oom();
- while (!set_isempty(s) &&
- dbus_connection_read_write_dispatch(bus, -1))
- ;
+ while (!set_isempty(s)) {
- if (!arg_quiet && d.result) {
- if (streq(d.result, "timeout"))
- log_error("Job timed out.");
- else if (streq(d.result, "canceled"))
- log_error("Job canceled.");
- else if (streq(d.result, "dependency"))
- log_error("A dependency job failed. See system journal for details.");
- else if (!streq(d.result, "done") && !streq(d.result, "skipped"))
- log_error("Job failed. See system journal and 'systemctl status' for details.");
- }
+ if (!dbus_connection_read_write_dispatch(bus, -1)) {
+ log_error("Disconnected from bus.");
+ return -ECONNREFUSED;
+ }
- if (streq_ptr(d.result, "timeout"))
- r = -ETIME;
- else if (streq_ptr(d.result, "canceled"))
- r = -ECANCELED;
- else if (!streq_ptr(d.result, "done") && !streq_ptr(d.result, "skipped"))
- r = -EIO;
- else
- r = 0;
+ if (!d.result)
+ goto free_name;
- free(d.result);
+ if (!arg_quiet) {
+ if (streq(d.result, "timeout"))
+ log_error("Job for %s timed out.", strna(d.name));
+ else if (streq(d.result, "canceled"))
+ log_error("Job for %s canceled.", strna(d.name));
+ else if (streq(d.result, "dependency"))
+ log_error("A dependency job for %s failed. See 'journalctl -n' for details.", strna(d.name));
+ else if (!streq(d.result, "done") && !streq(d.result, "skipped"))
+ log_error("Job for %s failed. See 'systemctl status %s' and 'journalctl -n' for details.", strna(d.name), strna(d.name));
+ }
-finish:
- /* This is slightly dirty, since we don't undo the filter registration. */
+ if (streq_ptr(d.result, "timeout"))
+ r = -ETIME;
+ else if (streq_ptr(d.result, "canceled"))
+ r = -ECANCELED;
+ else if (!streq_ptr(d.result, "done") && !streq_ptr(d.result, "skipped"))
+ r = -EIO;
+
+ free(d.result);
+ d.result = NULL;
+
+ free_name:
+ free(d.name);
+ d.name = NULL;
+ }
+ dbus_connection_remove_filter(bus, wait_filter, &d);
return r;
}
DBusConnection *bus,
const char *unit_name) {
- DBusMessage *reply = NULL;
+ _cleanup_dbus_message_unref_ DBusMessage *reply = NULL;
DBusMessageIter iter, sub;
char *service_trigger = NULL;
const char *interface = "org.freedesktop.systemd1.Unit",
*triggered_by_property = "TriggeredBy";
- char *unit_path = NULL, *n = NULL;
+ char _cleanup_free_ *unit_path = NULL, *n = NULL;
bool print_warning_label = true;
int r;
n = unit_name_mangle(unit_name);
- unit_path = unit_dbus_path_from_name(n ? n : unit_name);
- free(n);
+ if (!n) {
+ log_oom();
+ return;
+ }
+
+ unit_path = unit_dbus_path_from_name(n);
if (!unit_path) {
- log_error("Could not allocate dbus path.");
- goto finish;
+ log_oom();
+ return;
}
r = bus_method_call_with_reply (
DBUS_TYPE_STRING, &triggered_by_property,
DBUS_TYPE_INVALID);
if (r)
- goto finish;
+ return;
if (!dbus_message_iter_init(reply, &iter) ||
dbus_message_iter_get_arg_type(&iter) != DBUS_TYPE_VARIANT) {
log_error("Failed to parse reply.");
- goto finish;
-
+ return;
}
dbus_message_iter_recurse(&iter, &sub);
if (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_STRING) {
log_error("Failed to parse reply.");
- goto finish;
+ return;
}
dbus_message_iter_get_basic(&sub, &service_trigger);
r = check_one_unit(bus, service_trigger, true);
if (r < 0)
- goto finish;
+ return;
if (r == 0) {
if (print_warning_label) {
log_warning("Warning: Stopping %s, but it can still be activated by:", unit_name);
dbus_message_iter_next(&sub);
}
-finish:
- if (reply)
- dbus_message_unref(reply);
-
- free(unit_path);
}
static int start_unit_one(
DBusError *error,
Set *s) {
- DBusMessage *reply = NULL;
+ _cleanup_dbus_message_unref_ DBusMessage *reply = NULL;
const char *path;
int r;
- char *n;
+ _cleanup_free_ char *n, *p = NULL;
assert(method);
assert(name);
assert(mode);
assert(error);
- assert(arg_no_block || s);
n = unit_name_mangle(name);
- r = bus_method_call_with_reply (
+ if (!n)
+ return log_oom();
+
+ r = bus_method_call_with_reply(
bus,
"org.freedesktop.systemd1",
"/org/freedesktop/systemd1",
method,
&reply,
error,
- DBUS_TYPE_STRING, n ? (const char **) &n : &name,
+ DBUS_TYPE_STRING, &n,
DBUS_TYPE_STRING, &mode,
DBUS_TYPE_INVALID);
- free(n);
if (r) {
- if (r == -ENOENT && arg_action != ACTION_SYSTEMCTL )
+ if (r == -ENOENT && arg_action != ACTION_SYSTEMCTL)
/* There's always a fallback possible for
* legacy actions. */
r = -EADDRNOTAVAIL;
else
log_error("Failed to issue method call: %s", bus_error_message(error));
- goto finish;
+
+ return r;
}
if (!dbus_message_get_args(reply, error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
log_error("Failed to parse reply: %s", bus_error_message(error));
- r = -EIO;
- goto finish;
+ return -EIO;
}
- if (need_daemon_reload(bus, name))
- log_warning("Warning: Unit file of created job changed on disk, 'systemctl %s daemon-reload' recommended.",
- arg_scope == UNIT_FILE_SYSTEM ? "--system" : "--user");
-
- if (!arg_no_block) {
- char *p;
+ if (need_daemon_reload(bus, n))
+ log_warning("Warning: Unit file of %s changed on disk, 'systemctl %s daemon-reload' recommended.",
+ n, arg_scope == UNIT_FILE_SYSTEM ? "--system" : "--user");
- if (!(p = strdup(path))) {
- log_error("Failed to duplicate path.");
- r = -ENOMEM;
- goto finish;
- }
+ if (s) {
+ p = strdup(path);
+ if (!p)
+ return log_oom();
- if ((r = set_put(s, p)) < 0) {
- free(p);
+ r = set_put(s, p);
+ if (r < 0) {
log_error("Failed to add path to set.");
- goto finish;
+ return r;
}
- }
-
- /* When stopping a unit warn if it can still be triggered by
- * another active unit (socket, path, timer) */
- if (!arg_quiet && streq(method, "StopUnit"))
- check_triggering_units(bus, name);
- r = 0;
-
-finish:
- if (reply)
- dbus_message_unref(reply);
+ p = NULL;
+ }
- return r;
+ return 0;
}
static enum action verb_to_action(const char *verb) {
return ACTION_SUSPEND;
else if (streq(verb, "hibernate"))
return ACTION_HIBERNATE;
+ else if (streq(verb, "hybrid-sleep"))
+ return ACTION_HYBRID_SLEEP;
else
return ACTION_INVALID;
}
[ACTION_DEFAULT] = SPECIAL_DEFAULT_TARGET,
[ACTION_EXIT] = SPECIAL_EXIT_TARGET,
[ACTION_SUSPEND] = SPECIAL_SUSPEND_TARGET,
- [ACTION_HIBERNATE] = SPECIAL_HIBERNATE_TARGET
+ [ACTION_HIBERNATE] = SPECIAL_HIBERNATE_TARGET,
+ [ACTION_HYBRID_SLEEP] = SPECIAL_HYBRID_SLEEP_TARGET
};
int r, ret = 0;
}
if (!arg_no_block) {
- if ((ret = enable_wait_for_jobs(bus)) < 0) {
+ ret = enable_wait_for_jobs(bus);
+ if (ret < 0) {
log_error("Could not watch jobs: %s", strerror(-ret));
goto finish;
}
- if (!(s = set_new(string_hash_func, string_compare_func))) {
- log_error("Failed to allocate set.");
- ret = -ENOMEM;
+ s = set_new(string_hash_func, string_compare_func);
+ if (!s) {
+ ret = log_oom();
goto finish;
}
}
if (one_name) {
- if ((ret = start_unit_one(bus, method, one_name, mode, &error, s)) <= 0)
- goto finish;
+ ret = start_unit_one(bus, method, one_name, mode, &error, s);
+ if (ret < 0)
+ ret = translate_bus_error_to_exit_status(ret, &error);
} else {
- STRV_FOREACH(name, args+1)
- if ((r = start_unit_one(bus, method, *name, mode, &error, s)) != 0) {
+ STRV_FOREACH(name, args+1) {
+ r = start_unit_one(bus, method, *name, mode, &error, s);
+ if (r < 0) {
ret = translate_bus_error_to_exit_status(r, &error);
dbus_error_free(&error);
}
+ }
}
- if (!arg_no_block)
- if ((r = wait_for_jobs(bus, s)) < 0) {
+ if (!arg_no_block) {
+ r = wait_for_jobs(bus, s);
+ if (r < 0) {
ret = r;
goto finish;
}
-finish:
- if (s)
- set_free_free(s);
+ /* When stopping units, warn if they can still be triggered by
+ * another active unit (socket, path, timer) */
+ if (!arg_quiet && streq(method, "StopUnit")) {
+ if (one_name)
+ check_triggering_units(bus, one_name);
+ else
+ STRV_FOREACH(name, args+1)
+ check_triggering_units(bus, *name);
+ }
+ }
+finish:
+ set_free_free(s);
dbus_error_free(&error);
return ret;
method = "Hibernate";
break;
+ case ACTION_HYBRID_SLEEP:
+ method = "HybridSleep";
+ break;
+
default:
return -EINVAL;
}
(a == ACTION_POWEROFF ||
a == ACTION_REBOOT ||
a == ACTION_SUSPEND ||
- a == ACTION_HIBERNATE)) {
+ a == ACTION_HIBERNATE ||
+ a == ACTION_HYBRID_SLEEP)) {
r = reboot_with_logind(bus, a);
if (r >= 0)
return r;
if (i->id && arg_transport != TRANSPORT_SSH) {
int flags =
arg_all * OUTPUT_SHOW_ALL |
- arg_follow * OUTPUT_FOLLOW |
- !arg_quiet * OUTPUT_WARN_CUTOFF |
- on_tty() * OUTPUT_COLOR;
+ (!on_tty() || pager_have()) * OUTPUT_FULL_WIDTH |
+ on_tty() * OUTPUT_COLOR |
+ !arg_quiet * OUTPUT_WARN_CUTOFF;
printf("\n");
- show_journal_by_unit(i->id, arg_output, 0,
+ show_journal_by_unit(stdout,
+ i->id,
+ arg_output,
+ 0,
i->inactive_exit_timestamp_monotonic,
- arg_lines, flags);
+ arg_lines,
+ flags);
}
if (i->need_daemon_reload)
}
static int set_environment(DBusConnection *bus, char **args) {
- DBusMessage *m = NULL, *reply = NULL;
+ _cleanup_dbus_message_unref_ DBusMessage *m = NULL, *reply = NULL;
DBusError error;
- int r;
const char *method;
- DBusMessageIter iter, sub;
- char **name;
+ DBusMessageIter iter;
+ int r;
+
+ assert(bus);
dbus_error_init(&error);
? "SetEnvironment"
: "UnsetEnvironment";
- if (!(m = dbus_message_new_method_call(
- "org.freedesktop.systemd1",
- "/org/freedesktop/systemd1",
- "org.freedesktop.systemd1.Manager",
- method))) {
-
- log_error("Could not allocate message.");
- return -ENOMEM;
- }
+ m = dbus_message_new_method_call(
+ "org.freedesktop.systemd1",
+ "/org/freedesktop/systemd1",
+ "org.freedesktop.systemd1.Manager",
+ method);
+ if (!m)
+ return log_oom();
dbus_message_iter_init_append(m, &iter);
- if (!dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, "s", &sub)) {
- log_error("Could not append arguments to message.");
- r = -ENOMEM;
- goto finish;
- }
-
- STRV_FOREACH(name, args+1)
- if (!dbus_message_iter_append_basic(&sub, DBUS_TYPE_STRING, name)) {
- log_error("Could not append arguments to message.");
- r = -ENOMEM;
- goto finish;
- }
-
- if (!dbus_message_iter_close_container(&iter, &sub)) {
- log_error("Could not append arguments to message.");
- r = -ENOMEM;
- goto finish;
- }
+ r = bus_append_strv_iter(&iter, args + 1);
+ if (r < 0)
+ return log_oom();
- if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
+ reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error);
+ if (!reply) {
log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
r = 0;
finish:
- if (m)
- dbus_message_unref(m);
-
- if (reply)
- dbus_message_unref(reply);
-
dbus_error_free(&error);
-
return r;
}
* afterwards only the native units remain */
zero(paths);
- r = lookup_paths_init(&paths, MANAGER_SYSTEM, false, NULL, NULL, NULL);
+ r = lookup_paths_init(&paths, SYSTEMD_SYSTEM, false, NULL, NULL, NULL);
if (r < 0)
return r;
return r;
}
+static int mangle_names(char **original_names, char ***mangled_names) {
+ char **i, **l, **name;
+
+ l = new(char*, strv_length(original_names) + 1);
+ if (!l)
+ return log_oom();
+
+ i = l;
+ STRV_FOREACH(name, original_names) {
+
+ /* When enabling units qualified path names are OK,
+ * too, hence allow them explicitly. */
+
+ if (is_path(*name))
+ *i = strdup(*name);
+ else
+ *i = unit_name_mangle(*name);
+
+ if (!*i) {
+ strv_free(l);
+ return log_oom();
+ }
+
+ i++;
+ }
+
+ *i = NULL;
+ *mangled_names = l;
+
+ return 0;
+}
+
static int enable_unit(DBusConnection *bus, char **args) {
const char *verb = args[0];
UnitFileChange *changes = NULL;
DBusMessage *m = NULL, *reply = NULL;
int r;
DBusError error;
+ char **mangled_names = NULL;
r = enable_sysv_units(args);
if (r < 0)
}
}
+ r = 0;
} else {
const char *method;
bool send_force = true, expect_carries_install_info = false;
dbus_message_iter_init_append(m, &iter);
- r = bus_append_strv_iter(&iter, args+1);
+ r = mangle_names(args+1, &mangled_names);
+ if(r < 0)
+ goto finish;
+
+ r = bus_append_strv_iter(&iter, mangled_names);
if (r < 0) {
log_error("Failed to append unit files.");
goto finish;
unit_file_changes_free(changes, n_changes);
dbus_error_free(&error);
+
+ strv_free(mangled_names);
+
return r;
}
" --root=PATH Enable unit files in the specified root directory\n"
" --runtime Enable unit files only temporarily until next reboot\n"
" -n --lines=INTEGER Journal entries to show\n"
- " --follow Follow journal\n"
" -o --output=STRING Change journal output mode (short, short-monotonic,\n"
- " verbose, export, json, json-pretty, cat)\n\n"
+ " verbose, export, json, json-pretty, json-sse, cat)\n\n"
"Unit Commands:\n"
" list-units List loaded units\n"
" start [NAME...] Start (activate) one or more units\n"
" exit Request user instance exit\n"
" switch-root [ROOT] [INIT] Change to a different root file system\n"
" suspend Suspend the system\n"
- " hibernate Hibernate the system\n",
+ " hibernate Hibernate the system\n"
+ " hybrid-sleep Hibernate and suspend the system\n",
program_invocation_short_name);
return 0;
ARG_NO_ASK_PASSWORD,
ARG_FAILED,
ARG_RUNTIME,
- ARG_FOLLOW,
ARG_FORCE
};
{ "privileged",no_argument, NULL, 'P' },
{ "runtime", no_argument, NULL, ARG_RUNTIME },
{ "lines", required_argument, NULL, 'n' },
- { "follow", no_argument, NULL, ARG_FOLLOW },
{ "output", required_argument, NULL, 'o' },
{ NULL, 0, NULL, 0 }
};
arg_force ++;
break;
- case ARG_FOLLOW:
- arg_follow = true;
- break;
-
case 'f':
- /* -f is short for both --follow and --force! */
arg_force ++;
- arg_follow = true;
break;
case ARG_NO_RELOAD:
{ "kexec", EQUAL, 1, start_special },
{ "suspend", EQUAL, 1, start_special },
{ "hibernate", EQUAL, 1, start_special },
+ { "hybrid-sleep", EQUAL, 1, start_special },
{ "default", EQUAL, 1, start_special },
{ "rescue", EQUAL, 1, start_special },
{ "emergency", EQUAL, 1, start_special },
~ianmdlvl / elogind.git / blobdiff