-#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
+#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl
_ctls()
{
{-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
\*{-p,--property=}'[Show only properties by specific name]:unit property' \
{-a,--all}'[Show all units/properties, including dead/empty ones]' \
+ '--reverse[Show reverse dependencies]' \
+ '--after[Show units ordered after]' \
+ '--before[Show units ordered before]' \
'--failed[Show only failed units]' \
- "--full[Don't ellipsize unit names on output]" \
+ {-l,--full}"[Don't ellipsize unit names on output]" \
'--fail[When queueing a new job, fail if conflicting jobs are pending]' \
'--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
'--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
'--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
{-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
+ '--system[Show system and kernel messages]' \
+ '--user[Show messages from user services]' \
{-b,--this-boot}'[Show data only from current boot]' \
{-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
'--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
{-n,--lines=}'[Number of journal entries to show]:integer' \
'--no-tail[Show all lines, even in follow mode]' \
{-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
- '--full[Show long fields in full]' \
+ {-l,--full}'[Show long fields in full]' \
{-a,--all}'[Show all fields, including long and unprintable]' \
{-q,--quiet}"[Don't show privilege warning]" \
'--no-pager[Do not pipe output into a pager]' \
'--clean[Clean up all files and directories with an age parameter configured.]' \
'--remove[All files and directories marked with r, R in the configuration files are removed.]' \
'--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
+ '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
'--help[Prints a short help text and exits.]' \
'*::files:_files'
;;
'--plymouth[Ask question with plymouth(8).]' \
'--console[Ask question on /dev/console.]'
;;
+ machinectl)
+ _arguments \
+ {-h,--help}'[Prints a short help text and exits.]' \
+ '--version[Prints a short version string and exits.]' \
+ {-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
+ {-a,--all}'[Show all proerties]' \
+ (-l,--full)'[Do not ellipsize cgroup members]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not ask for system passwords]' \
+ '--kill-who=[Who to send signal to]:killwho:(leader all)' \
+ {-s,--signal=}'[Which signal to send]:signal:_signals' \
+ {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ '*::machinectl command:_machinectl_command'
+ ;;
*) _message 'eh?' ;;
esac
}
_systemd_analyze_command(){
local -a _systemd_analyze_cmds
+ # Descriptions taken from systemd-analyze --help.
_systemd_analyze_cmds=(
- 'time:Print the time taken to start'
- 'blame:prints a list of all running units, ordered by the time they took to initialize'
- 'plot:prints an SVG graphic detailing which system services have been started at what time'
- 'dot:Dump dependency graph for dot(1)'
+ 'time:Print time spent in the kernel before reaching userspace'
+ 'blame:Print list of running units ordered by time to init'
+ 'critical-chain:Print a tree of the time critical chain of units'
+ 'plot:Output SVG graphic showing service initialization'
+ 'dot:Dump dependency graph (in dot(1) format)'
)
if (( CURRENT == 1 )); then
"disable:Disable one or more unit files"
"reenable:Reenable one or more unit files"
"preset:Enable/disable one or more unit files based on preset configuration"
+ "help:Show documentation for specified units"
+ "list-dependencies:Show unit dependency tree"
"mask:Mask one or more units"
"unmask:Unmask one or more units"
"link:Link one or more units files into the search path"
if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
! _retrieve_cache SYS_ALL_UNITS;
then
- _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) )
+ _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
_store_cache SYS_ALL_UNITS _sys_all_units
fi
}
if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
! _retrieve_cache SYS_REALLY_ALL_UNITS;
then
- all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) )
+ all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
_systemctl_all_units
really_all_units=($_sys_all_units $all_unit_files)
_sys_really_all_units=(${(u)really_all_units})
unit=${units[i]}
prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
if [[ "${prop}" = "$property=$value" ]]; then
- echo "${unit}"
+ echo " ${unit}"
fi
done
}
-_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )}
-_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )}
-_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )}
-_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )}
-_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )}
-_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )}
+_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
+_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )}
+_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )}
+_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
+_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
+_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
# Completion functions for ALL_UNITS
-for fun in is-active is-failed is-enabled status show mask preset ; do
+for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_really_all_units
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_enabled_units
- compadd "$@" -a - _sys_enabled_units
+ _systemctl_disabled_units
+ compadd "$@" -a - _sys_enabled_units _sys_disabled_units
}
done
_systemctl_all_units
compadd "$@" - $( _filter_units_by_property CanStart yes \
${_sys_all_units[*]} | while read line; do \
- [[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \
+ [[ "$line" =~ \.device$ ]] || echo " $line"; \
done )
}
done
fi
compadd "$@" ${suf} - $(systemctl show-environment \
- | while read line; do echo "${line%%\=}";done )
+ | while read line; do echo " ${line%%\=}";done )
}
done
}
-_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo "$a"; done; }) )}
-_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo "$a"; done; }) )}
-_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo "$a"; done; }) )}
+_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )}
+_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )}
+_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )}
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
_describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
else
local curcontext="$curcontext"
- local -a dumps
+ local -a _dumps
cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
- dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" )
- if [[ -n "$dumps" ]]; then
- compadd "${dumps[@]}"
+ # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
+ _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
+ if [[ -n "$_dumps" ]]; then
+ _describe -t pids 'coredumps' _dumps
else
_message "no coredumps"
fi
}
+(( $+functions[_machinectl_command] )) || _machinectl_command()
+{
+ local -a _machinectl_cmds
+ _machinectl_cmds=(
+ "list:List currently running VMs/containers"
+ "status:Show VM/container status"
+ "show:Show properties of one or more VMs/containers"
+ "terminate:Terminate one or more VMs/containers"
+ "kill:Send signal to process or a VM/container"
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+ cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ case $cmd in
+ list) msg="no options" ;;
+ *)
+ _machines=( "${(foa)$(machinectl list | awk '{print $1}')}" )
+ if [[ -n "$_machines" ]]; then
+ _describe 'machines' _machines
+ else
+ _message 'no machines'
+ fi
+ esac
+ else
+ _message "no more options"
+ fi
+ fi
+}
+
_udevadm_info(){
_arguments \
'--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
'--kernel[Print the kernel uevents.]' \
'--udev[Print the udev event after the rule processing.]' \
'--property[Also print the properties of the event.]' \
- '--subsystem-match=[Filter events by subsystem[/devtype].]' \
+ '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
'--tag-match=[Filter events by property.]' \
'--help[Print help text.]'
}
~ianmdlvl / elogind.git / blobdiff