Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<term><option>-p</option></term>
<listitem><para>When showing
- unit/job/manager information, limit
+ unit/job/manager properties, limit
display to certain properties as
specified as argument. If not
specified all set properties are
<listitem><para>When listing units,
show all units, regardless of their
state, including inactive units. When
- showing unit/job/manager information,
+ showing unit/job/manager properties,
show all properties regardless whether
they are set or not.</para></listitem>
</varlistentry>
enqueued and <command>systemctl</command> will
wait until it is completed. By passing this
argument it is only verified and
- enqueued.</para></listitem> </varlistentry>
+ enqueued.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-legend</option></term>
+
+ <listitem><para>Do not print a legend, i.e.
+ the column headers and the footer with hints.
+ </para></listitem>
+ </varlistentry>
<varlistentry>
<term><option>--no-pager</option></term>
<command>systemctl</command> will
query the user on the terminal for the
necessary secrets. Use this option to
- switch this behavior off. In this
- case the password must be supplied by
- some other means (for example
- graphical password agents) or the
- service might fail.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--kill-mode=</option></term>
-
- <listitem><para>When used with
- <command>kill</command>, choose the
- mode how to kill the selected
- processes. Must be one of
- <option>control-group</option> or
- <option>process</option> to select
- whether to kill the entire control
- group or only the selected process
- itself. If omitted defaults to
- <option>control-group</option> if
- <option>--kill-who=all</option> is
- set, or <option>process</option>
- otherwise. You probably never need to
- use this switch.</para></listitem>
+ switch this behavior off. In this case
+ the password must be supplied by some
+ other means (for example graphical
+ password agents) or the service might
+ fail. This also disables querying the
+ user for authentication for privileged
+ operations.</para></listitem>
</varlistentry>
<varlistentry>
<command>halt</command>,
<command>poweroff</command>,
<command>reboot</command> or
- <command>kexec</command> execute
+ <command>kexec</command> execute the
selected operation without shutting
down all units. However, all processes
will be killed forcibly and all file
systems are unmounted or remounted
read-only. This is hence a drastic but
relatively safe option to request an
- immediate reboot.</para></listitem>
+ immediate reboot. If
+ <option>--force</option> is specified
+ twice for these operations, they will
+ be executed immediately without
+ terminating any processes or umounting
+ any file systems. Warning: specifying
+ <option>--force</option> twice with
+ any of these operations might result
+ in data loss.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--root=</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and
+ related commands), use alternative
+ root path when looking for unit
+ files.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--defaults</option></term>
+ <term><option>--runtime</option></term>
<listitem><para>When used with
- <command>disable</command>, ensures
- that only the symlinks created by
- <command>enable</command> are removed,
- not all symlinks pointing to the unit
- file that shall be
- disabled.</para></listitem>
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and related commands), make
+ changes only temporarily, so that they
+ are dropped on the next reboot. This
+ will have the effect that changes are
+ not made in subdirectories of
+ <filename>/etc</filename> but in
+ <filename>/run</filename>, with
+ identical immediate effects, however,
+ since the latter is lost on reboot,
+ the changes are lost
+ too.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--host</option></term>
<listitem><para>Execute operation
- remotely. Specifiy a hostname, or
- username and hostname seperated by @,
+ remotely. Specify a hostname, or
+ username and hostname separated by @,
to connect to. This will use SSH to
talk to the remote systemd
instance.</para></listitem>
PolicyKit before executing the
operation.</para></listitem>
</varlistentry>
+
+ <varlistentry>
+ <term><option>--lines=</option></term>
+ <term><option>-n</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> controls the
+ number of journal lines to show,
+ counting from the most recent
+ ones. Takes a positive integer
+ argument. Defaults to
+ 10.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--follow</option></term>
+ <term><option>-f</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> continously
+ prints new journal entries as they are
+ appended to the
+ journal.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--output=</option></term>
+ <term><option>-o</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> controls the
+ formatting of the journal entries that
+ are shown. For the available choices
+ see
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. Defaults
+ to
+ <literal>short</literal>.</para></listitem>
+ </varlistentry>
+
</variablelist>
<para>The following commands are understood:</para>
<listitem><para>Reload one or more
units if they support it. If not,
- restart them instead. If the units
- are not running yet the operation
- will fail. Note that for
- compatibility with SysV init scripts
+ restart them instead. Do nothing if
+ the units are not running. Note that
+ for compatibility with SysV init
+ scripts
<command>force-reload</command> is
- equivalent to this command.</para></listitem>
+ equivalent to this
+ command.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>isolate [NAME]</command></term>
<listitem><para>Show terse runtime
status information about one or more
- units. This function is intended to
- generate human-readable output. If you
- are looking for computer-parsable
- output, use <command>show</command>
- instead. If a PID is passed
- information about the unit the process
- of the PID belongs to is
- shown.</para></listitem>
+ units, followed by its most recent log
+ data from the journal. This function
+ is intended to generate human-readable
+ output. If you are looking for
+ computer-parsable output, use
+ <command>show</command> instead. If a
+ PID is passed information about the
+ unit the process of the PID belongs to
+ is shown.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>show [NAME...|JOB...]</command></term>
command.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>list-unit-files</command></term>
+
+ <listitem><para>List installed unit files.
+ </para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>enable [NAME...]</command></term>
configuration directory, and hence
undoes the changes made by
<command>enable</command>. Note
- however that this by default removes
+ however that this removes
all symlinks to the unit files
(i.e. including manual additions), not
just those actually created by
- <command>enable</command>. If only the
- symlinks that are suggested by default
- shall be removed, pass
- <option>--defaults</option>. This
+ <command>enable</command>. This call
implicitly reloads the systemd daemon
configuration after completing the
disabling of the units. Note that this
(as with
<command>enable</command>). Returns an
exit code of 0 if at least one is
- enabled, non-zero
- otherwise.</para></listitem>
+ enabled, non-zero otherwise. Prints
+ the current enable status. To suppress
+ this output use
+ <option>--quiet</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>reenable [NAME...]</command></term>
+
+ <listitem><para>Reenable one or more
+ unit files, as specified on the
+ command line. This is a combination of
+ <command>disable</command> and
+ <command>enable</command> and is
+ useful to reset the symlinks a unit is
+ enabled with to the defaults
+ configured in the
+ <literal>[Install]</literal> section
+ of the unit file.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>preset [NAME...]</command></term>
+
+ <listitem><para>Reset one or more unit
+ files, as specified on the command
+ line, to the defaults configured in a
+ preset file. This has the same effect
+ as <command>disable</command> or
+ <command>enable</command>, depending
+ how the unit is listed in the preset
+ files.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>mask [NAME...]</command></term>
+
+ <listitem><para>Mask one or more unit
+ files, as specified on the command
+ line. This will link these units to
+ <filename>/dev/null</filename>, making
+ it impossible to start them. This is a stronger version
+ of <command>disable</command>, since
+ it prohibits all kinds of activation
+ of the unit, including manual
+ activation. Use this option with
+ care.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>unmask [NAME...]</command></term>
+
+ <listitem><para>Unmask one or more
+ unit files, as specified on the
+ command line. This will undo the
+ effect of
+ <command>mask</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>link [NAME...]</command></term>
+
+ <listitem><para>Link a unit file that
+ is not in the unit file search paths
+ into the unit file search path. This
+ requires an absolute path to a unit
+ file. The effect of this can be undone
+ with <command>disable</command>. The
+ effect of this command is that a unit
+ file is available for
+ <command>start</command> and other
+ commands although it isn't installed
+ directly in the unit search
+ path.</para>
+ </listitem>
</varlistentry>
<varlistentry>
their numeric job
IDs. If no job id is specified, cancel all pending jobs.</para></listitem>
</varlistentry>
- <varlistentry>
- <term><command>monitor</command></term>
-
- <listitem><para>Monitor unit/job
- changes. This is mostly useful for
- debugging purposes and prints a line
- each time systemd loads or unloads a
- unit configuration file, or a unit
- property changes.</para></listitem>
- </varlistentry>
<varlistentry>
<term><command>dump</command></term>
system. This is mostly equivalent to
<command>start halt.target</command>
but also prints a wall message to all
- users. If
- combined with <option>--force</option>
- shutdown of all running services is
- skipped, however all processes are killed
- and all file systems are unmounted or
+ users. If combined with
+ <option>--force</option> shutdown of
+ all running services is skipped,
+ however all processes are killed and
+ all file systems are unmounted or
mounted read-only, immediately
- followed by the
- system halt.</para></listitem>
+ followed by the system halt. If
+ <option>--force</option> is specified
+ twice the the operation is immediately
+ executed without terminating any
+ processes or unmounting any file
+ systems. This may result in data
+ loss.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>poweroff</command></term>
power-off the system. This is mostly
equivalent to <command>start
poweroff.target</command> but also
- prints a wall message to all
- users. If
+ prints a wall message to all users. If
combined with <option>--force</option>
shutdown of all running services is
- skipped, however all processes are killed
- and all file systems are unmounted or
- mounted read-only, immediately
- followed by the
- powering off.</para></listitem>
+ skipped, however all processes are
+ killed and all file systems are
+ unmounted or mounted read-only,
+ immediately followed by the powering
+ off. If <option>--force</option> is
+ specified twice the the operation is
+ immediately executed without
+ terminating any processes or
+ unmounting any file systems. This may
+ result in data loss.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>reboot</command></term>
- <listitem><para>Shut down and
- reboot the system. This is mostly
- equivalent to <command>start
+ <listitem><para>Shut down and reboot
+ the system. This is mostly equivalent
+ to <command>start
reboot.target</command> but also
- prints a wall message to all
- users. If
+ prints a wall message to all users. If
combined with <option>--force</option>
shutdown of all running services is
- skipped, however all processes are killed
- and all file systems are unmounted or
- mounted read-only, immediately
- followed by the
- reboot.</para></listitem>
+ skipped, however all processes are
+ killed and all file systems are
+ unmounted or mounted read-only,
+ immediately followed by the reboot. If
+ <option>--force</option> is specified
+ twice the the operation is immediately
+ executed without terminating any
+ processes or unmounting any file
+ systems. This may result in data
+ loss.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>kexec</command></term>
<option>--user</option> option) and
will fail otherwise.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>suspend</command></term>
+
+ <listitem><para>Suspend the system.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>hibernate</command></term>
+
+ <listitem><para>Hibernate the system.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>switch-root [ROOT] [INIT]</command></term>
+
+ <listitem><para>Switches to a
+ different root directory and executes
+ a new system manager process below
+ it. This is intended for usage in
+ initial RAM disks ("initrd"), and will
+ transition from the initrd's system
+ manager process (a.k.a "init" process)
+ to the main system manager
+ process. Takes two arguments: the
+ directory to make the new root
+ directory, and the path to the new
+ system manager binary below it to
+ execute as PID 1. If the latter is
+ ommitted or the empty string, a
+ systemd binary will automatically be
+ searched for and used as init. If the
+ system manager path is ommitted or
+ equal the empty string the state of
+ the initrd's system manager process is
+ passed to the main system manager,
+ which allows later introspection of the
+ state of the services involved in the
+ initrd boot.</para></listitem>
+ </varlistentry>
</variablelist>
</refsect1>
code otherwise.</para>
</refsect1>
+ <refsect1>
+ <title>Environment</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><varname>$SYSTEMD_PAGER</varname></term>
+ <listitem><para>Pager to use when
+ <option>--no-pager</option> is not given;
+ overrides <varname>$PAGER</varname>. Setting
+ this to an empty string or the value
+ <literal>cat</literal> is equivalent to passing
+ <option>--no-pager</option>.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemadm</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>
~ianmdlvl / elogind.git / blobdiff