udevadm: test - remove --force option

[elogind.git] / extras / scsi_id / scsi_id.8

diff --git a/extras/scsi_id/scsi_id.8 b/extras/scsi_id/scsi_id.8
index aa429a580c1f90c27cddb5f8554bdd2d98c1ebf8..e133b7e63f3d93d49ca749c1a8d6c617e40a5dd2 100644 (file)
--- a/extras/scsi_id/scsi_id.8
+++ b/extras/scsi_id/scsi_id.8
@@ -17,7 +17,7 @@ with a non\-zero value.
 \fBscsi_id\fP is primarily for use by other utilities such as \fBudev\fP
 that require a unique SCSI identifier.
 
 \fBscsi_id\fP is primarily for use by other utilities such as \fBudev\fP
 that require a unique SCSI identifier.
 

-By default all devices are assume black listed, the \fB\-\-whitelisted\fP option must
+By default all devices are assumed black listed, the \fB\-\-whitelisted\fP option must

 be specified on the command line or in the config file for any useful
 behaviour.
 
 be specified on the command line or in the config file for any useful
 behaviour.
 


@@ -33,7 +33,7 @@ by page 0x80. For example:
 
 .sp
 .nf
 
 .sp
 .nf

-# scsi_id --page=0x80 --devpath=/block/sdg
+# /lib/udev/scsi_id \-\-page=0x80 \-\-whitelisted \-\-device=/dev/sda

 SIBM     3542           1T05078453
 .fi
 .P
 SIBM     3542           1T05078453
 .fi
 .P


@@ -45,32 +45,19 @@ identifier starts with the NAA value of 6):
 
 .sp
 .nf
 
 .sp
 .nf

-# scsi_id --page=0x83 --devpath=/block/sdg
+# /lib/udev/scsi_id \-\-page=0x83 \-\-whitelisted \-\-device=/dev/sda

 3600a0b80000b174b000000d63efc5c8c
 .fi
 .P
 
 .SH OPTIONS
 .TP
 3600a0b80000b174b000000d63efc5c8c
 .fi
 .P
 
 .SH OPTIONS
 .TP

-.BI \-\-fallback-to-sysfs
-Always print information (model, vendor strings) about the device even
-if it does not support VPD pages.
-.TP
-.BI \-\-ignore-sysfs
-Ignore sysfs entries. Used for devices which are not represented as SCSI
-devices, but understand SG_IO commands.
-.TP

 .BI \-\-blacklisted
 The default behaviour \- treat the device as black listed, and do nothing
 unless a white listed device is found in the scsi_id config\-file.
 .TP
 .BI \-\-device=\| device\^
 .BI \-\-blacklisted
 The default behaviour \- treat the device as black listed, and do nothing
 unless a white listed device is found in the scsi_id config\-file.
 .TP
 .BI \-\-device=\| device\^

-Instead
-of determining and creating a device node based on a sysfs dev
-entry as done for the \fB\-s\fP, send SG_IO commands to 
-\fBdevice\fP, such as \fB/dev/sdc\fP.
-This argument should also be used when invoked via udev to avoid problems
-with creation of temporary files on not-yet writable directories.
+Send SG_IO commands to \fBdevice\fP, such as \fB/dev/sdc\fP.

 .TP
 .BI \-\-config=\| config\-file
 Read configuration and black/white list entries from
 .TP
 .BI \-\-config=\| config\-file
 Read configuration and black/white list entries from


@@ -85,10 +72,6 @@ on the command line or in the scsi_id configuration file for
 .B scsi_id
 to generate any output.
 .TP
 .B scsi_id
 to generate any output.
 .TP

-.BI \-\-prefix-bus-id
-Prefix the identification string with the  driver model (sysfs) bus id of
-the SCSI device.
-.TP

 .BI \-\-page=\| 0x80 | 0x83 | pre-spc3-83
 Use SCSI INQUIRY VPD page code 0x80, 0x83, or pre-spc3-83.
 .sp
 .BI \-\-page=\| 0x80 | 0x83 | pre-spc3-83
 Use SCSI INQUIRY VPD page code 0x80, 0x83, or pre-spc3-83.
 .sp


@@ -102,11 +85,6 @@ option is used for older model 4, 5, and 6 EMC Symmetrix devices, its
 use with SPC-2 or SPC-3 compliant devices will fallback to the page 83
 format supported by these devices.
 .TP
 use with SPC-2 or SPC-3 compliant devices will fallback to the page 83
 format supported by these devices.
 .TP

-.BI \-\-devpath=\| sysfs\-devpath
-Generate an id for the
-.B sysfs\-devpath.
-The sysfs mount point must not be included.
-.TP

 .BI \-\-replace-whitespace
 Reformat the output : replace all whitespaces by underscores.
 .TP
 .BI \-\-replace-whitespace
 Reformat the output : replace all whitespaces by underscores.
 .TP


@@ -120,13 +98,6 @@ Generate verbose debugging output.
 Display version number and exit.
 .RE
 
 Display version number and exit.
 .RE
 

-.SH ENVIRONMENT
-
-If the DEVPATH environment variable is set, scsi_id assumes it has been
-invoked via udev (or some other hotplug program), and all errors or
-warnings are sent using syslog.
-.P
-

 .SH "FILES"
 .nf
 .ft B
 .SH "FILES"
 .nf
 .ft B