[PATCH] update udev to include scsi_id 0.6

[elogind.git] / extras / scsi_id / scsi_id.8

diff --git a/extras/scsi_id/scsi_id.8 b/extras/scsi_id/scsi_id.8
index db3effbc459416e9abf806442a57b99acbb10cc7..591bb79366a03bad8769fcdf45b84800cf66175a 100644 (file)
--- a/extras/scsi_id/scsi_id.8
+++ b/extras/scsi_id/scsi_id.8
@@ -12,12 +12,12 @@ all SCSI devices that properly support page 0x80 or page 0x83.
 
 If a result is generated it is sent to standard output, and the program
 exits with a zero value. If no identifier is output, the program exits
-with a non-zero value.
+with a non\-zero value.
 
 \fBscsi_id\fP is primarily for use by other utilities such as \fBudev\fP
 that require a unique SCSI identifier.
 
-By default all devices are assume black listed, the \fB-g\fP option must
+By default all devices are assume black listed, the \fB\-g\fP option must
 be specified on the command line or in the config file for any useful
 behaviour.
 
@@ -58,18 +58,18 @@ mode, and expects the environment variable DEVPATH to specify the
 corresponding sysfs device. See section below on usage with \fBudev\fP.
 .TP
 .BI \-b
-The default behaviour - treat the device as black listed, and do nothing
-unless a white listed device is found in the scsi_id config-file.
+The default behaviour \- treat the device as black listed, and do nothing
+unless a white listed device is found in the scsi_id config\-file.
 .TP
 .BI \-d "\| device\^"
 Instead
 of determining and creating a device node based on a sysfs dev
-entry as done for the \fB-s\fP, send SG_IO commands to 
+entry as done for the \fB\-s\fP, send SG_IO commands to 
 \fBdevice\fP, such as \fB/dev/sdc\fP.
 .TP
-.BI \-f "\| config-file"
+.BI \-f "\| config\-file"
 Read configuration and black/white list entries from
-.B config-file 
+.B config\-file 
 rather than the default
 .B /etc/scsi_id.config
 file.
@@ -89,12 +89,15 @@ Use SCSI INQUIRY VPD page code 0x80 or 0x83. The default behaviour is to
 query the available VPD pages, and use page 0x83 if found, else page 0x80
 if found, else nothing.
 .TP
-.BI \-s "\| sysfs-device"
+.BI \-s "\| sysfs\-device"
 Generate an id for the
-.B sysfs-device.
+.B sysfs\-device.
 The sysfs mount point must not be included. For example, use /block/sd,
 not /sys/block/sd.
 .TP
+.BI \-u
+Reformat the output : replace all whitespaces by underscores
+.TP
 .BI \-v
 Generate verbose debugging output.
 .TP
@@ -113,7 +116,7 @@ and the results will likely not be as expected.
 
 When in this mode, all errors and warnings are sent via syslog.
 
-To determine the specific value needed in a RESULT key, use the -s option,
+To determine the specific value needed in a RESULT key, use the \-s option,
 for example:
 
 .sp