rules: update Fedora rules

[elogind.git] / etc / udev / gentoo / 50-udev.rules

diff --git a/etc/udev/gentoo/50-udev.rules b/etc/udev/gentoo/50-udev.rules
index ddabe1acc6e76c7c843e9c40d3737a0d40c3eb5c..dd329712ddb950985cd4642749e7dda4f33ef8c7 100644 (file)
--- a/etc/udev/gentoo/50-udev.rules
+++ b/etc/udev/gentoo/50-udev.rules
@@ -248,6 +248,7 @@ SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/u
 SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
        NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", GROUP="usb", MODE="0664" 
 
+# Timeouts for scsi devices
 # Setting timeout for tape-devices (type 1) to 900 seconds
 # and 60 seconds for device types 0, 7 and 14
 # if you need timeouts for other devices add a similar rule
@@ -255,53 +256,8 @@ SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
 
-# Module autoloading
-ACTION!="add", GOTO="hotplug_no_add_event"
-
-# check if the device has already been claimed by a driver
-ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"
-
-# this driver is broken and should not be loaded automatically
-SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"
-
-# Autoload modules that lack aliases but have them defined inutoload modules
-ENV{MODALIAS}=="?*", RUN{ignore_error}+="modprobe.sh $env{MODALIAS}"
-
-# /etc/modprobe.conf.
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
-# needed aliases are defined in /etc/modprobe.d/pnp-aliases
-
-
-SUBSYSTEM=="i2o", RUN+="modprobe.sh i2o_block"
-SUBSYSTEM=="mmc", RUN+="modprobe.sh mmc_block"
-
-# Parts taken from redhat-rules
-# sd:           0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
-# sr:           4 TYPE_WORM, 5 TYPE_ROM
-# st/osst:      1 TYPE_TAPE
-
-# Load driver for scsi-device
-SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"
-ATTRS{type}=="?*",     TEST!="[module/sg]", RUN+="modprobe.sh sg"
-ATTRS{type}=="0|7|14", RUN+="modprobe.sh sd_mod"
-ATTRS{type}=="4|5",    RUN+="modprobe.sh sr_mod"
-ATTRS{type}=="8",      RUN+="modprobe.sh ch"
-
-ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st"
-ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
-       ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst"
-ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="modprobe.sh $env{ID_SCSI_TAPE_DRIVER}"
-LABEL="hotplug_scsi_end"
-
-
-SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"
-
-LABEL="hotplug_load_end"
-
 
 # Load firmware
-SUBSYSTEM=="firmware", RUN+="firmware.sh"
-
-LABEL="hotplug_no_add_event"
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
 
 LABEL="gentoo_device_rules_end"