chiark / gitweb /
Remove dependency of systemd units, services and slices for new sessions.
[elogind.git] / TODO
diff --git a/TODO b/TODO
index fdc37b16046ecb6f3d0b892077277d405d31558a..4fdecebd0fa4fbb77e78d2cc4b37242f69721fd6 100644 (file)
--- a/TODO
+++ b/TODO
@@ -6,24 +6,19 @@ Bugfixes:
   automount points even when the original .automount file did not exist
   anymore. Only the .mount unit was still around.
 
   automount points even when the original .automount file did not exist
   anymore. Only the .mount unit was still around.
 
-* ExecStart with unicode characters fails in strv_split_quoted:
+* ExecStart with unicode characters fails in strv_split_extract:
 
           [Service]
           Environment=ONE='one' "TWO='two two' too" THREE=
           ExecStart=/bin/python3 -c 'import sys;print(sys.argv)' $ONE $TWO $THREE
 
 
           [Service]
           Environment=ONE='one' "TWO='two two' too" THREE=
           ExecStart=/bin/python3 -c 'import sys;print(sys.argv)' $ONE $TWO $THREE
 
-* MEMORY return code is overloaded for syntax errors in the command line.
-  str_split_quoted() should return a real return code, so spawn_child can
-  report the failure properly.
+* When systemctl --host is used, underlying ssh connection can remain open.
+  bus_close does not kill children?
 
 External:
 
 * Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros.
 
 
 External:
 
 * Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros.
 
-* Fedora: move kernel image to /usr/lib/modules/, kernel-install will take care of populating /boot
-
-* Fedora: remove /etc/resolv.conf tmpfiles hack
-
 * wiki: update journal format documentation for lz4 additions
 
 * When lz4 gets an API for lz4 command output, make use of it to
 * wiki: update journal format documentation for lz4 additions
 
 * When lz4 gets an API for lz4 command output, make use of it to
@@ -31,27 +26,192 @@ External:
 
 Features:
 
 
 Features:
 
-* rename sd_bus_open_system_container() to sd_bus_open_system_machine()
+* sd-event: maybe add support for inotify events
 
 
-* Port various tools to make use of verbs.[ch], where applicable
+* PID 1 should send out sd_notify("WATCHDOG=1") messages (for usage in the --user mode, and when run via nspawn)
+
+* nspawn should send out sd_notify("WATCHDOG=1") messages
+
+* nspawn should optionally support receiving WATCHDOG=1 messages from its payload PID 1...
+
+* consider throwing a warning if a service declares it wants to be "Before=" a .device unit.
+
+* "systemctl edit" should know a mode to create a new unit file
+
+* there's probably something wrong with having user mounts below /sys,
+  as we have for debugfs. for exmaple, src/core/mount.c handles mounts
+  prefixed with /sys generally special.
+  http://lists.freedesktop.org/archives/systemd-devel/2015-June/032962.html
+
+* Add PassEnvironment= setting to service units, to import select env vars from PID 1 into the service env block
+
+* nspawn: fix logic always print a final newline on output.
+  https://github.com/systemd/systemd/pull/272#issuecomment-113153176
+
+* make nspawn's --network-veth switch more powerful:
+  http://lists.freedesktop.org/archives/systemd-devel/2015-June/033121.html
+
+* man: document that unless you use StandardError=null the shell >/dev/stderr won't work in shell scripts in services
+
+* man: clarify that "machinectl show" shows different information than "machinectl status" (no cgroup tree, no IP addresses, ...)
+
+* "systemctl daemon-reload" should result in /etc/systemd/system.conf being reloaded by systemd
+
+* install: include generator dirs in unit file search paths
+
+* stop using off_t, it's a crazy type. Use uint64_t instead.
+
+* logind: follow PropertiesChanged state more closely, to deal with quick logouts and relogins
+
+* invent a better systemd-run scheme for naming scopes, that works with remoting
+
+* add journalctl -H that talks via ssh to a remote peer and passes through binary logs data
+
+* change journalctl -M to acquire fd to journal directory via machined, and then operate on that via openat() instead of absolute paths
+
+* add a version of --merge which also merges /var/log/journal/remote
+
+* log accumulated resource usage after each service invocation
+
+* nspawn: a nice way to boot up without machine id set, so that it is set at boot automatically for supporting --ephemeral. Maybe hash the host machine id together with the machine name to generate the machine id for the container
+
+* logind: rename session scope so that it includes the UID. THat way
+  the session scope can be arranged freely in slices and we don't have
+  make assumptions about their slice anymore.
+
+* journalctl: -m should access container journals directly by enumerating them via machined, and also watch containers coming and going. Benefit: nspawn --ephemeral would start working nicely with the journal.
+
+* nspawn: don't copy /etc/resolv.conf from host into container unless we are in shared-network mode
+
+* nspawn: optionally automatically add FORWARD rules to iptables whenever nspawn is running, remove them when shut down.
+
+* importd: generate a nice warning if mkfs.btrfs is missing
+
+* nspawn: add a logic for cleaning up read-only, hidden container images in /var/lib/machines that are not ancestors of any non-hidden containers
+
+* nspawn: Improve error message when --bind= is used on a non-existing source directory
+
+* nspawn: maybe make copying of /etc/resolv.conf optional, and skip it if --read-only is used
+
+* man: document how update dkr images works with machinectl
+  http://lists.freedesktop.org/archives/systemd-devel/2015-February/028630.html
+
+* nspawn: as soon as networkd has a bus interface, hook up --network-interface=, --network-bridge= with networkd, to trigger netdev creation should an interface be missing
+
+* rework C11 utf8.[ch] to use char32_t instead of uint32_t when referring
+  to unicode chars, to make things more expressive.
+
+* "machinectl migrate" or similar to copy a container from or to a
+  difference host, via ssh
+
+* tmpfiles: creating new directories/subvolumes/fifos/device nodes
+  should not follow symlinks. None of the other adjustment or creation
+  calls follow symlinks.
+
+* fstab-generator: default to tmpfs-as-root if only usr= is specified on the kernel cmdline
+
+* docs: bring http://www.freedesktop.org/wiki/Software/systemd/MyServiceCantGetRealtime up to date
+
+* mounting and unmounting mount points manually with different source
+  devices will result in collected collected on all devices used.
+  http://lists.freedesktop.org/archives/systemd-devel/2015-April/030225.html
+
+* add a job mode that will fail if a transaction would mean stopping
+  running units. Use this in timedated to manage the NTP service
+  state.
+  http://lists.freedesktop.org/archives/systemd-devel/2015-April/030229.html
 
 
-* Check all invocations of access() and consider turning them into laccess()
+* Maybe add support for the equivalent of "ethtool advertise" to .link files?
+  http://lists.freedesktop.org/archives/systemd-devel/2015-April/030112.html
 
 
-* "machinectl start/enable/disable foo" as aliases for "systemctl start/enable/disable systemd-nspawn@foo.service"
+* .timer units should optionally support CLOCK_BOOTTIME in addition to CLOCK_MONOTONIC
 
 
-* "machinectl snapshot" to make a snapshot of a tree or container into /var/lib/containers
+* create a btrfs qgroup for /var/lib/machines, and add all container
+  subvolumes we create to it.
 
 
-* "machinectl rm" to remove a container tree from /var/lib/containers
+* When logging about multiple units (stopping BoundTo units, conflicts, etc.),
+  log both units as UNIT=, so that journalctl -u triggers on both.
+
+* to allow "linking" of nspawn containers, extend --network-bridge= so
+  that it can dynamically create bridge interfaces that are refcounted
+  by the containers on them. For each group of containers to link together
+
+* journalctl --verify: don't show files that are currently being
+  written to as FAIL, but instead show that their are being written
+  to.
+
+* assign MESSAGE_ID to log messages about failed services
+
+* coredump: make the handler check /proc/$PID/rlimits for RLIMIT_CORE,
+  and supress coredump if turned off. Then change RLIMIT_CORE to
+  infinity by default for all services. This then allows per-service
+  control of coredumping.
+
+* generate better errors when people try to set transient properties
+  that are not supported...
+  http://lists.freedesktop.org/archives/systemd-devel/2015-February/028076.html
+
+* Introduce $LISTEN_NAMES to complement $LISTEN_FDS, containing a
+  colon separated list of identifiers for the fds passed.
+
+* maybe introduce WantsMountsFor=? Usecase:
+  http://lists.freedesktop.org/archives/systemd-devel/2015-January/027729.html
+
+* rework kexec logic to use new kexec_file_load() syscall, so that we
+  don't have to call kexec tool anymore.
+
+* The udev blkid built-in should expose a property that reflects
+  whether media was sensed in USB CF/SD card readers. This should then
+  be used to control SYSTEMD_READY=1/0 so that USB card readers aren't
+  picked up by systemd unless they contain a medium. This would mirror
+  the behaviour we already have for CD drives.
+
+* nspawn: emulate /dev/kmsg using CUSE and turn off the syslog syscall
+  with seccomp. That should provide us with a useful log buffer that
+  systemd can log to during early boot, and disconnect container logs
+  from the kernel's logs.
+
+* networkd/udev: implement SR_IOV configuration in .link files:
+  http://lists.freedesktop.org/archives/systemd-devel/2015-January/027451.html
+
+* When RLIMIT_NPROC is set from a unit file it currently always is set
+  for root, not for the user set in User=, which makes it
+  useless. After fixing this, set RLIMIT_NPROC for
+  systemd-journal-xyz, and all other of our services that run under
+  their own user ids, and use User= (but only in a world where userns
+  is ubiquitous since otherwise we cannot invoke those daemons on the
+  host AND in a container anymore). Also, if LimitNPROC= is used
+  without User= we should warn and refuse operation.
+
+* logind: maybe allow configuration of the StopTimeout for session scopes
+
+* Set NoNewPrivileges= on all of our own services, where that makes sense
+
+* Rework systemctl's GetAll property parsing to use the generic bus_map_all_properties() API
+
+* rework journald sigbus stuff to use mutex
+
+* import-dkr: support tarsum checksum verification, if it becomes reality one day...
+
+* import-dkr: convert json bits to nspawn configuration
+
+* core/cgroup: support net_cls modules, and support automatically allocating class ids, then add support for making firewall changes depending on it, to implement a per-service firewall
+
+* introduce systemd-nspawn-ephemeral@.service, and hook it into "machinectl start" with a new --ephemeral switch
+
+* "machinectl status" should also show internal logs of the container in question
+
+* "machinectl list-images" should show os-release data, as well as machine-info data (including deployment level)
+
+* Port various tools to make use of verbs.[ch], where applicable
 
 * "machinectl history"
 
 * "machinectl diff"
 
 
 * "machinectl history"
 
 * "machinectl diff"
 
-* "machinectl status" should show 10 most recent log lines of both the host logs of the unit of the machine, plus the logs generated in the machine
-
-* add transparent btrfs pool in a loopback file in /var if btrfs operations (such as systemd-import pull-dkr) are used and /var is not a btrfs file system
+* "machinectl commit" that takes a writable snapshot of a tree, invokes a shell in it, and marks it read-only after use
 
 
-* machined: open up certain commands to unprivileged clients via polkit
+* systemd-nspawn -x should support ephemeral instances of gpt images
 
 * hostnamectl: show root image uuid
 
 
 * hostnamectl: show root image uuid
 
@@ -62,12 +222,6 @@ Features:
 
 * port libmount hookup to use API's own inotify interface, as soon as that is table in libmount
 
 
 * port libmount hookup to use API's own inotify interface, as soon as that is table in libmount
 
-* bash completion for busctl, to make it truly useful
-
-* journald: broken file systems are real (btrfs), we need to handle
-  SIGBUS in some way if we cannot write or read from the disk.
-  https://bugzilla.redhat.com/show_bug.cgi?id=1151848
-
 * "systemctl preset-all" should probably order the unit files it
   operates on lexicographically before starting to work, in order to
   ensure deterministic behaviour if two unit files conflict (like DMs
 * "systemctl preset-all" should probably order the unit files it
   operates on lexicographically before starting to work, in order to
   ensure deterministic behaviour if two unit files conflict (like DMs
@@ -79,7 +233,7 @@ Features:
 
 * systemd-journal-upload (or a new, related tool): allow pushing out
   journal messages onto the network in BSD syslog protocol,
 
 * systemd-journal-upload (or a new, related tool): allow pushing out
   journal messages onto the network in BSD syslog protocol,
-  continously. Default to some link-local IP mcast group, to make this
+  continuously. Default to some link-local IP mcast group, to make this
   useful as a one-stop debugging tool.
 
 * synchronize console access with BSD locks:
   useful as a one-stop debugging tool.
 
 * synchronize console access with BSD locks:
@@ -88,21 +242,12 @@ Features:
 * as soon as we have kdbus, and sender timestamps, revisit coalescing multiple parallel daemon reloads:
   http://lists.freedesktop.org/archives/systemd-devel/2014-December/025862.html
 
 * as soon as we have kdbus, and sender timestamps, revisit coalescing multiple parallel daemon reloads:
   http://lists.freedesktop.org/archives/systemd-devel/2014-December/025862.html
 
-* set $REMOTE_IP (or $REMOTE_ADDR/$REMOTE_PORT) environment variable when doing per-connection socket activation. use format introduced by xinetd or CGI for this
-
 * the install state probably shouldn't get confused by generated units, think dbus1/kdbus compat!
 
 * in systemctl list-unit-files: show the install value the presets would suggest for a service in a third column
 
 * the install state probably shouldn't get confused by generated units, think dbus1/kdbus compat!
 
 * in systemctl list-unit-files: show the install value the presets would suggest for a service in a third column
 
-* we should try harder to collapse start jobs for swaps that end up being the same:
-  http://lists.freedesktop.org/archives/systemd-devel/2014-November/025359.html
-
-* timedated should compensate on SetTime for the time spent in polkit
-
 * figure out when we can use the coarse timers
 
 * figure out when we can use the coarse timers
 
-* sd-resolve: drop res_query wrapping, people should call via the bus to resolved instead
-
 * add "systemctl start -v foobar.service" that shows logs of a service
   while the start command runs. This is non-trivial to do without
   races though, since we should flush out all journal messages before
 * add "systemctl start -v foobar.service" that shows logs of a service
   while the start command runs. This is non-trivial to do without
   races though, since we should flush out all journal messages before
@@ -112,22 +257,18 @@ Features:
 
 * timesyncd + resolved: add ugly bus calls to set NTP and DNS servers per-interface, for usage by NM
 
 
 * timesyncd + resolved: add ugly bus calls to set NTP and DNS servers per-interface, for usage by NM
 
-* networkd-wait-online really should have a timeout by default
-
 * add infrastructure to allocate dynamic/transient users and UID ranges, for use in user-namespaced containers, per-seat gdm login screens and gdm guest sessions
 
 * machined: add an API so that libvirt-lxc can inform us about network interfaces being removed or added to an existing machine
 
 * maybe add support for specifier expansion in user.conf, specifically DefaultEnvironment=
 
 * add infrastructure to allocate dynamic/transient users and UID ranges, for use in user-namespaced containers, per-seat gdm login screens and gdm guest sessions
 
 * machined: add an API so that libvirt-lxc can inform us about network interfaces being removed or added to an existing machine
 
 * maybe add support for specifier expansion in user.conf, specifically DefaultEnvironment=
 
-* code cleanup: retire FOREACH_WORD_QUOTED, port to unquote_first_word() loops instead
+* code cleanup: retire FOREACH_WORD_QUOTED, port to extract_first_word() loops instead
 
 * introduce systemd-timesync-wait.service or so to sync on an NTP fix?
 
 * systemd --user should issue sd_notify() upon reaching basic.target, not on becoming idle
 
 
 * introduce systemd-timesync-wait.service or so to sync on an NTP fix?
 
 * systemd --user should issue sd_notify() upon reaching basic.target, not on becoming idle
 
-* configure.ac pretends dbus was optional but actually hardcodes use of dbus' pkg-config file to determine various dbus dirs such as policy and activation dirs
-
 * consider showing the unit names during boot up in the status output, not just the unit descriptions
 
 * dhcp: do we allow configuring dhcp routes on interfaces that are not the one we got the dhcp info from?
 * consider showing the unit names during boot up in the status output, not just the unit descriptions
 
 * dhcp: do we allow configuring dhcp routes on interfaces that are not the one we got the dhcp info from?
@@ -158,9 +299,7 @@ Features:
 
 * exponential backoff in timesyncd and resolved when we cannot reach a server
 
 
 * exponential backoff in timesyncd and resolved when we cannot reach a server
 
-* tmpfiles: port to unquote_many_words(), similar to sysusers
-
-* unquote_many_words() should probably be used by a lot of code that
+* extract_many_words() should probably be used by a lot of code that
   currently uses FOREACH_WORD and friends. For example, most conf
   parsing callbacks should use it.
 
   currently uses FOREACH_WORD and friends. For example, most conf
   parsing callbacks should use it.
 
@@ -169,43 +308,42 @@ Features:
 * systemd.show_status= should probably have a mode where only failed
   units are shown.
 
 * systemd.show_status= should probably have a mode where only failed
   units are shown.
 
+* add systemd.abort_on_kill or some other such flag to send SIGABRT instead of SIGKILL
+  (throughout the codebase, not only PID1)
+
 * networkd:
   - add LLDP client side support
   - the DHCP lease data (such as NTP/DNS) is still made available when
     a carrier is lost on a link. It should be removed instantly.
 * networkd:
   - add LLDP client side support
   - the DHCP lease data (such as NTP/DNS) is still made available when
     a carrier is lost on a link. It should be removed instantly.
-  - .network setting that allows overriding of the hostname to send to the dhcp server
-    http://lists.freedesktop.org/archives/systemd-devel/2014-July/021550.html
   - expose in the API the following bits:
         - option 15, domain name and/or option 119, search list
         - option 12, host name and/or option 81, fqdn
   - expose in the API the following bits:
         - option 15, domain name and/or option 119, search list
         - option 12, host name and/or option 81, fqdn
-        - option 100, 101, timezone
         - option 123, 144, geolocation
         - option 252, configure http proxy (PAC/wpad)
         - option 123, 144, geolocation
         - option 252, configure http proxy (PAC/wpad)
-  - networkd's dhcp server should transparently pass on the DNS and
-    NTP server list it got from user configuration and its dhcp client
-    to clients. It should also pass on its own timezone information.
   - provide a way to define a per-network interface default metric value
     for all routes to it. possibly a second default for DHCP routes.
   - allow Name= to be specified repeatedly in the [Match] section. Maybe also
     support Name=foo*|bar*|baz ?
   - provide a way to define a per-network interface default metric value
     for all routes to it. possibly a second default for DHCP routes.
   - allow Name= to be specified repeatedly in the [Match] section. Maybe also
     support Name=foo*|bar*|baz ?
+  - duplicate address check for static IPs (like ARPCHECK in network-scripts)
+  - allow DUID/IAID to be customized, see issue #394.
+  - support configuration option for TSO (tcp segmentation offload)
+  - networkd: whenever uplink info changes, make DHCP server send out FORCERENEW
 
 * resolved:
   - put networkd events and rtnl events at a higher priority, so that
     we always process them before we process client requests
   - DNSSEC
 
 * resolved:
   - put networkd events and rtnl events at a higher priority, so that
     we always process them before we process client requests
   - DNSSEC
-        - use base64 for key presentation?
         - add display of private key types (http://tools.ietf.org/html/rfc4034#appendix-A.1.1)?
         - add display of private key types (http://tools.ietf.org/html/rfc4034#appendix-A.1.1)?
-        - add nice formatting of DNS timestamps
   - DNS
         - search paths
   - mDNS/DNS-SD
         - avahi compat
   - DNS-SD service registration from socket units
   - edns0
   - DNS
         - search paths
   - mDNS/DNS-SD
         - avahi compat
   - DNS-SD service registration from socket units
   - edns0
-  - dname
+  - dname: Not necessary for plain DNS as synthesized cname is handed out instead if we do not
+           announce dname support. However, for DNSSEC it is necessary as the synthesized cname
+           will not be signed.
   - cname on PTR (?)
   - cname on PTR (?)
-  - maybe randomize DNS UDP source ports
-  - maybe compare query section of DNS replies
 
 * Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely
 
 
 * Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely
 
@@ -273,9 +411,6 @@ Features:
   desktop UIs such as gnome-shell to freeze apps that are not visible
   on screen, not unlike how job control works on the shell
 
   desktop UIs such as gnome-shell to freeze apps that are not visible
   on screen, not unlike how job control works on the shell
 
-* completions:
- - manager property enumeration was broken when systemd moved to /usr/lib/
-
 * cgroups:
   - implement per-slice CPUFairScheduling=1 switch
   - handle jointly mounted controllers correctly
 * cgroups:
   - implement per-slice CPUFairScheduling=1 switch
   - handle jointly mounted controllers correctly
@@ -286,7 +421,6 @@ Features:
     the hierarchies of child processes
 
 * transient units:
     the hierarchies of child processes
 
 * transient units:
-  - allow creating auxiliary units with the same call
   - add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt
   - ensure scope units may be started only a single time
 
   - add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt
   - ensure scope units may be started only a single time
 
@@ -324,20 +458,13 @@ Features:
   ReadOnlyDirectories=... for whitelisting files for a service.
 
 * sd-bus:
   ReadOnlyDirectories=... for whitelisting files for a service.
 
 * sd-bus:
+  - EBADSLT handling
+  - GetAllProperties() on a non-existing object does not result in a failure currently
   - kdbus: process fd=-1 for incoming msgs
   - kdbus: process fd=-1 for incoming msgs
-  - make dsrt happy, and change userspace header for kdbus to yyyyuta{tv}v
-  - kdbus: PID/TID goes missing for method calls from outside the PID namespace?
-  - kdbus: the kernel should not allow messages to be delivered that have a reply serial != 0, reply-expect unset, but no appropriate window
-  - kdbus: timestamps on kernel's NameOwnerChanged messages?
-  - kdbus' busnames.target should get pulled in by basic.target
-  - Ignore .busname units on classic D-Bus boots, systemd-resolved cannot be started on kdbus
-    without the active policy and should get a Wants=org.freedesktop.resolve1.busname to
-    pull-in the policy.
   - port to sd-resolve for connecting to TCP dbus servers
   - kdbus: maybe add controlling tty metadata fields
   - see if we can introduce a new sd_bus_get_owner_machine_id() call to retrieve the machine ID of the machine of the bus itself
   - when kdbus does not take our message without memfds, try again with memfds
   - port to sd-resolve for connecting to TCP dbus servers
   - kdbus: maybe add controlling tty metadata fields
   - see if we can introduce a new sd_bus_get_owner_machine_id() call to retrieve the machine ID of the machine of the bus itself
   - when kdbus does not take our message without memfds, try again with memfds
-  - introduce sd_bus_emit_object_added()/sd_bus_emit_object_removed() that automatically includes the build-in interfaces in the list
   - see if we can drop more message validation on the sending side
   - add API to clone sd_bus_message objects
   - make AddMatch calls on dbus1 transports async?
   - see if we can drop more message validation on the sending side
   - add API to clone sd_bus_message objects
   - make AddMatch calls on dbus1 transports async?
@@ -392,9 +519,6 @@ Features:
 
 * teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off})
 
 
 * teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off})
 
-* after all byte-wise realloc() is slow, even on glibc, so i guess we
-  need manual exponential loops after all
-
 * BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify
   that the boot loader should be installed to the ESP. Define a way
   how an installer can figure out whether a BLS compliant boot loader
 * BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify
   that the boot loader should be installed to the ESP. Define a way
   how an installer can figure out whether a BLS compliant boot loader
@@ -428,8 +552,6 @@ Features:
 
 * maybe do not install getty@tty1.service symlink in /etc but in /usr?
 
 
 * maybe do not install getty@tty1.service symlink in /etc but in /usr?
 
-* re-enable "make check" for gtk-doc (broken for unknown reason)
-
 * fstab: add new mount option x-systemd-after=/foobar/waldo to allow manual dependencies to other mount points
   https://bugzilla.redhat.com/show_bug.cgi?id=812826
 
 * fstab: add new mount option x-systemd-after=/foobar/waldo to allow manual dependencies to other mount points
   https://bugzilla.redhat.com/show_bug.cgi?id=812826
 
@@ -457,7 +579,6 @@ Features:
   - logind: when the power button is pressed short, just popup a
     logout dialog. If it is pressed for 1s, do the usual
     shutdown. Inspiration are Macs here.
   - logind: when the power button is pressed short, just popup a
     logout dialog. If it is pressed for 1s, do the usual
     shutdown. Inspiration are Macs here.
-  - logind: allow users to kill or lock their own sessions
   - expose "Locked" property on logind sesison objects
   - given that logind now lets PID 1 do all nasty work, we can
     probably reduce the capability set it retains substantially.
   - expose "Locked" property on logind sesison objects
   - given that logind now lets PID 1 do all nasty work, we can
     probably reduce the capability set it retains substantially.
@@ -487,11 +608,11 @@ Features:
   - journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access
   - journactl: support negative filtering, i.e. FOOBAR!="waldo",
     and !FOOBAR for events without FOOBAR.
   - journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access
   - journactl: support negative filtering, i.e. FOOBAR!="waldo",
     and !FOOBAR for events without FOOBAR.
-  - journal: send out marker messages every now and then, and immediately sync with fdatasync() afterwards, in order to have hourly guaranteed syncs.
+  - journal: store timestamp of journal_file_set_offline() int he header,
+    so it is possible to display when the file was last synced.
   - journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again.
   - journal: find a way to allow dropping history early, based on priority, other rules
   - journal: When used on NFS, check payload hashes
   - journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again.
   - journal: find a way to allow dropping history early, based on priority, other rules
   - journal: When used on NFS, check payload hashes
-  - journal live copy, based on libneon (client) and libmicrohttpd (server)
   - journald: add kernel cmdline option to disable ratelimiting for debug purposes
   - refuse taking lower-case variable names in sd_journal_send() and friends.
   - journald: we currently rotate only after MaxUse+MaxFilesize has been reached.
   - journald: add kernel cmdline option to disable ratelimiting for debug purposes
   - refuse taking lower-case variable names in sd_journal_send() and friends.
   - journald: we currently rotate only after MaxUse+MaxFilesize has been reached.
@@ -568,10 +689,6 @@ Features:
 
 * If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle().
 
 
 * If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle().
 
-* fedup: add --unit to systemctl switch-root somehow
-* fedup: do not delete initrd on switch-root
-* fedup: generator
-
 * clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed
 
 * on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel
 * clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed
 
 * on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel
@@ -584,11 +701,7 @@ Features:
 * currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not
 
 * nspawn:
 * currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not
 
 * nspawn:
-  - bind mount read-only the cgroup tree higher than nspawn
   - refuses to boot containers without /etc/machine-id (OK?), and with empty /etc/machine-id (not OK).
   - refuses to boot containers without /etc/machine-id (OK?), and with empty /etc/machine-id (not OK).
-  - introduce machines.target to order after all nspawn instances
-  - systemd-nspawn@.service should fail if some nspawn arg is invalid, with Type=notify
-  - PID 1 doesn't apply nspawns devices cgroup policy
 
 * cryptsetup:
   - cryptsetup-generator: allow specification of passwords in crypttab itself
 
 * cryptsetup:
   - cryptsetup-generator: allow specification of passwords in crypttab itself
@@ -633,17 +746,6 @@ Features:
 
 * when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr
 
 
 * when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr
 
-* automount: implement expire:
-   - set superblock timeout AUTOFS_DEV_IOCTL_TIMEOUT_CMD
-   - periodically run AUTOFS_DEV_IOCTL_EXPIRE_CMD
-     - every timeout/4 (original autofs logic)
-     - blocking, needs a thread
-     - run until -EAGAIN
-   - receive expire packet on pipe if kernel tells the timeout is over
-     - call umount
-     - answer expire packet on pipe with AUTOFS_DEV_IOCTL_{READY,FAIL}_CMD
-   - AUTOFS_DEV_IOCTL_EXPIRE_CMD returns
-
 * ExecOnFailure=/usr/bin/foo
 
 * udev:
 * ExecOnFailure=/usr/bin/foo
 
 * udev:
@@ -675,6 +777,8 @@ Features:
 
 * tmpfiles:
   - apply "x" on "D" too (see patch from William Douglas)
 
 * tmpfiles:
   - apply "x" on "D" too (see patch from William Douglas)
+  - replace F with f+.
+  - instead of ignoring unknown fields, reject them.
 
 * for services: do not set $HOME in services unless requested
 
 
 * for services: do not set $HOME in services unless requested
 
@@ -776,16 +880,13 @@ Features:
 
 * dhcp:
    - figure out how much we can increase Maximum Message Size
 
 * dhcp:
    - figure out how much we can increase Maximum Message Size
-   - export timezone information
    - support RFC4702 (pass FQDN)
 
 * dhcp6:
    - add functions to set previously stored IPv6 addresses on startup and get
      them at shutdown; store them in client->ia_na
    - write more test cases
    - support RFC4702 (pass FQDN)
 
 * dhcp6:
    - add functions to set previously stored IPv6 addresses on startup and get
      them at shutdown; store them in client->ia_na
    - write more test cases
-   - implement and do duplicate address detection, see rfc 4862, 5.4.
    - implement reconfigure support, see 5.3., 15.11. and 22.20.
    - implement reconfigure support, see 5.3., 15.11. and 22.20.
-   - implement information request, see 1.2. and 18.1.5.
    - implement support for temporary adressess (IA_TA)
    - implement dhcpv6 authentication
    - investigate the usefulness of Confirm messages; i.e. are there any
    - implement support for temporary adressess (IA_TA)
    - implement dhcpv6 authentication
    - investigate the usefulness of Confirm messages; i.e. are there any