[PATCH] added frugalware udev ruleset.

[elogind.git] / README

diff --git a/README b/README
index 26032c35dcfe234cffb1d0e3ffacd9fd66840e5f..54cee659a833206953dc521f7ff8f59d4996a673 100644 (file)
--- a/README
+++ b/README
@@ -44,29 +44,28 @@ To use:
                what udev is doing.  This is enabled by default.  Note, if you
                are building udev against klibc it is recommended that you
                disable this option (due to klibc's syslog implementation.)
                what udev is doing.  This is enabled by default.  Note, if you
                are building udev against klibc it is recommended that you
                disable this option (due to klibc's syslog implementation.)

-       USE_DBUS
-               if set to 'true', DBUS messages will be sent everytime udev
-               creates or removes a device node.  This requires that DBUS
-               development headers and libraries be present on your system to
-               build properly.  Default value is 'false'.
+       USE_SELINUX
+               if set to 'true', udev will be built with SELinux support
+               enabled.  This is disabled by default.

        DEBUG
                if set to 'true', debugging messages will be sent to the syslog
                as udev is run.  Default value is 'false'.
        DEBUG
                if set to 'true', debugging messages will be sent to the syslog
                as udev is run.  Default value is 'false'.

+       KERNEL_DIR
+               If this is not set it will default to /lib/modules/`uname -r`/build
+               This is used if USE_KLIBC=true to find the kernel include
+               directory that klibc needs to build against.  This must be set
+               if you are not building udev while running a 2.6 kernel.

 
       So, if you want to build udev using klibc with debugging messages, you
       would do:
        make USE_KLIBC=true DEBUG=true
 
 
       So, if you want to build udev using klibc with debugging messages, you
       would do:
        make USE_KLIBC=true DEBUG=true
 

-      Note: If you want to use klibc, you will have to set up the "linux"
-            symlink properly.  See the file klibc/klibc/README and pay
-           attention to step "a)" there.
-

 - Install the project:
        make install
 
   This will put the udev binary in /sbin, create the /udev and /etc/udev
   directories, and place the udev configuration files in /etc/udev.  You
 - Install the project:
        make install
 
   This will put the udev binary in /sbin, create the /udev and /etc/udev
   directories, and place the udev configuration files in /etc/udev.  You

-  will probably want to edit the namedev.* files to create custom naming
+  will probably want to edit the *.rules files to create custom naming

   rules.  More info on how the config files are set up are contained in
   comments in the files, and is located in the documentation.
 
   rules.  More info on how the config files are set up are contained in
   comments in the files, and is located in the documentation.
 


@@ -93,5 +92,3 @@ know by sending a message to the linux-hotplug-devel mailing list at:
 greg k-h
 greg@kroah.com
 
 greg k-h
 greg@kroah.com
 

-
-