systemd System and Service Manager
+CHANGES WITH 218:
+
+ * If compiled with --enable-xkbcommon, systemd-localed will
+ verify x11 keymap settings by compiling the given keymap. It
+ will spew out warnings if the compilation fails. This
+ requires libxkbcommon to be installed.
+
+ * All systemd programs that read standalone configuration files
+ in /etc now also support a corresponding series of
+ .conf.d configuration directories in /etc/, /run/,
+ /usr/local/lib/, /usr/lib/, and (if configured with
+ --enable-split-usr) /lib/. In particular, the following
+ configuration files now have corresponding configuration
+ directories: system.conf user.conf, logind.conf,
+ journald.conf, sleep.conf, bootchart.conf, coredump.conf,
+ resolved.conf, timesyncd.conf, journal-remote.conf, and
+ journal-upload.conf. Note that distributions should use the
+ configuration directories in /usr/lib/; the directories in
+ /etc/ are reserved for the system administrator.
+
+CHANGES WITH 217:
+
+ * journalctl gained the new options -t/--identifier= to match
+ on the syslog identifier (aka "tag"), as well as --utc to
+ show log timestamps in the UTC timezone. journalctl now also
+ accepts -n/--lines=all to disable line capping in a pager.
+
+ * journalctl gained a new switch, --flush, that synchronously
+ flushes logs from /run/log/journal to /var/log/journal if
+ persistent storage is enabled. systemd-journal-flush.service
+ now waits until the operation is complete.
+
+ * Services can notify the manager before they start a reload
+ (by sending RELOADING=1) or shutdown (by sending
+ STOPPING=1). This allows the manager to track and show the
+ internal state of daemons and closes a race condition when
+ the process is still running but has closed its D-Bus
+ connection.
+
+ * Services with Type=oneshot do not have to have any ExecStart
+ commands anymore.
+
+ * User units are now loaded also from
+ $XDG_RUNTIME_DIR/systemd/user/. This is similar to the
+ /run/systemd/user directory that was already previously
+ supported, but is under the control of the user.
+
+ * Job timeouts (i.e. time-outs on the time a job that is
+ queued stays in the run queue) can now optionally result in
+ immediate reboot or power-off actions (JobTimeoutAction= and
+ JobTimeoutRebootArgument=). This is useful on ".target"
+ units, to limit the maximum time a target remains
+ undispatched in the run queue, and to trigger an emergency
+ operation in such a case. This is now used by default to
+ turn off the system if boot-up (as defined by everything in
+ basic.target) hangs and does not complete for at least
+ 15min. Also, if power-off or reboot hang for at least 30min
+ an immediate power-off/reboot operation is triggered. This
+ functionality is particularly useful to increase reliability
+ on embedded devices, but also on laptops which might
+ accidentally get powered on when carried in a backpack and
+ whose boot stays stuck in a hard disk encryption passphrase
+ question.
+
+ * systemd-logind can be configured to also handle lid switch
+ events even when the machine is docked or multiple displays
+ are attached (HandleLidSwitchDocked= option).
+
+ * A helper binary and a service have been added which can be
+ used to resume from hibernation in the initramfs. A
+ generator will parse the resume= option on the kernel
+ command line to trigger resume.
+
+ * A user console daemon systemd-consoled has been
+ added. Currently, it is a preview, and will so far open a
+ single terminal on each session of the user marked as
+ Desktop=systemd-console.
+
+ * Route metrics can be specified for DHCP routes added by
+ systemd-networkd.
+
+ * The SELinux context of socket-activated services can be set
+ from the information provided by the networking stack
+ (SELinuxContextFromNet= option).
+
+ * Userspace firmware loading support has been removed and
+ the minimum supported kernel version is thus bumped to 3.7.
+
+ * Timeout for udev workers has been increased from 1 to 3
+ minutes, but a warning will be printed after 1 minute to
+ help diagnose kernel modules that take a long time to load.
+
+ * Udev rules can now remove tags on devices with TAG-="foobar".
+
+ * systemd's readahead implementation has been removed. In many
+ circumstances it didn't give expected benefits even for
+ rotational disk drives and was becoming less relevant in the
+ age of SSDs. As none of the developers has been using
+ rotating media anymore, and nobody stepped up to actively
+ maintain this component of systemd it has now been removed.
+
+ * Swap units can use Options= to specify discard options.
+ Discard options specified for swaps in /etc/fstab are now
+ respected.
+
+ * Docker containers are now detected as a separate type of
+ virtualization.
+
+ * The Password Agent protocol gained support for queries where
+ the user input is shown, useful e.g. for user names.
+ systemd-ask-password gained a new --echo option to turn that
+ on.
+
+ * The default sysctl.d/ snippets will now set:
+
+ net.core.default_qdisc = fq_codel
+
+ This selects Fair Queuing Controlled Delay as the default
+ queuing discipline for network interfaces. fq_codel helps
+ fight the network bufferbloat problem. It is believed to be
+ a good default with no tuning required for most workloads.
+ Downstream distributions may override this choice. On 10Gbit
+ servers that do not do forwarding, "fq" may perform better.
+ Systems without a good clocksource should use "pfifo_fast".
+
+ * If kdbus is enabled during build a new option BusPolicy= is
+ available for service units, that allows locking all service
+ processes into a stricter bus policy, in order to limit
+ access to various bus services, or even hide most of them
+ from the service's view entirely.
+
+ * networkctl will now show the .network and .link file
+ networkd has applied to a specific interface.
+
+ * sd-login gained a new API call sd_session_get_desktop() to
+ query which desktop environment has been selected for a
+ session.
+
+ * UNIX utmp support is now compile-time optional to support
+ legacy-free systems.
+
+ * systemctl gained two new commands "add-wants" and
+ "add-requires" for pulling in units from specific targets
+ easily.
+
+ * If the word "rescue" is specified on the kernel command line
+ the system will now boot into rescue mode (aka
+ rescue.target), which was previously available only by
+ specifying "1" or "systemd.unit=rescue.target" on the kernel
+ command line. This new kernel command line option nicely
+ mirrors the already existing "emergency" kernel command line
+ option.
+
+ * New kernel command line options mount.usr=, mount.usrflags=,
+ mount.usrfstype= have been added that match root=, rootflags=,
+ rootfstype= but allow mounting a specific file system to
+ /usr.
+
+ * The $NOTIFY_SOCKET is now also passed to control processes of
+ services, not only the main process.
+
+ * This version reenables support for fsck's -l switch. This
+ means at least version v2.25 of util-linux is required for
+ operation, otherwise dead-locks on device nodes may
+ occur. Again: you need to update util-linux to at least
+ v2.25 when updating systemd to v217.
+
+ * The "multi-seat-x" tool has been removed from systemd, as
+ its functionality has been integrated into X servers 1.16,
+ and the tool is hence redundant. It is recommended to update
+ display managers invoking this tool to simply invoke X
+ directly from now on, again.
+
+ * Support for the new ALLOW_INTERACTIVE_AUTHORIZATION D-Bus
+ message flag has been added for all of systemd's PolicyKit
+ authenticated method calls has been added. In particular
+ this now allows optional interactive authorization via
+ PolicyKit for many of PID1's privileged operations such as
+ unit file enabling and disabling.
+
+ * "udevadm hwdb --update" learnt a new switch "--usr" for
+ placing the rebuilt hardware database in /usr instead of
+ /etc. When used only hardware database entries stored in
+ /usr will be used, and any user database entries in /etc are
+ ignored. This functionality is useful for vendors to ship a
+ pre-built database on systems where local configuration is
+ unnecessary or unlikely.
+
+ * Calendar time specifications in .timer units now also
+ understand the strings "semi-annually", "quarterly" and
+ "minutely" as shortcuts (in addition to the preexisting
+ "anually", "hourly", ...).
+
+ * systemd-tmpfiles will now correctly create files in /dev
+ at boot which are marked for creation only at boot. It is
+ recommended to always create static device nodes with 'c!'
+ and 'b!', so that they are created only at boot and not
+ overwritten at runtime.
+
+ * When the watchdog logic is used for a service (WatchdogSec=)
+ and the watchdog timeout is hit the service will now be
+ terminated with SIGABRT (instead of just SIGTERM), in order
+ to make sure a proper coredump and backtrace is
+ generated. This ensures that hanging services will result in
+ similar coredump/backtrace behaviour as services that hit a
+ segmentation fault.
+
+ Contributions from: Andreas Henriksson, Andrei Borzenkov,
+ Angus Gibson, Ansgar Burchardt, Ben Wolsieffer, Brandon L.
+ Black, Christian Hesse, Cristian Rodríguez, Daniel Buch,
+ Daniele Medri, Daniel Mack, Dan Williams, Dave Reisner, David
+ Herrmann, David Sommerseth, David Strauss, Emil Renner
+ Berthing, Eric Cook, Evangelos Foutras, Filipe Brandenburger,
+ Gustavo Sverzut Barbieri, Hans de Goede, Harald Hoyer, Hristo
+ Venev, Hugo Grostabussiat, Ivan Shapovalov, Jan Janssen, Jan
+ Synacek, Jonathan Liu, Juho Son, Karel Zak, Kay Sievers, Klaus
+ Purer, Koen Kooi, Lennart Poettering, Lukas Nykryn, Lukasz
+ Skalski, Łukasz Stelmach, Mantas Mikulėnas, Marcel Holtmann,
+ Marius Tessmann, Marko Myllynen, Martin Pitt, Michael Biebl,
+ Michael Marineau, Michael Olbrich, Michael Scherer, Michal
+ Schmidt, Michal Sekletar, Miroslav Lichvar, Patrik Flykt,
+ Philippe De Swert, Piotr Drąg, Rahul Sundaram, Richard
+ Weinberger, Robert Milasan, Ronny Chevalier, Ruben Kerkhof,
+ Santiago Vila, Sergey Ptashnick, Simon McVittie, Sjoerd
+ Simons, Stefan Brüns, Steven Allen, Steven Noonan, Susant
+ Sahani, Sylvain Plantefève, Thomas Hindoe Paaboel Andersen,
+ Timofey Titovets, Tobias Hunger, Tom Gundersen, Torstein
+ Husebø, Umut Tezduyar Lindskog, WaLyong Cho, Zbigniew
+ Jędrzejewski-Szmek.
+
+ -- Berlin, 2014-10-28
+
+CHANGES WITH 216:
+
+ * timedated no longer reads NTP implementation unit names from
+ /usr/lib/systemd/ntp-units.d/*.list. Alternative NTP
+ implementations should add a
+
+ Conflicts=systemd-timesyncd.service
+
+ to their unit files to take over and replace systemd's NTP
+ default functionality.
+
+ * systemd-sysusers gained a new line type "r" for configuring
+ which UID/GID ranges to allocate system users/groups
+ from. Lines of type "u" may now add an additional column
+ that specifies the home directory for the system user to be
+ created. Also, systemd-sysusers may now optionally read user
+ information from STDIN instead of a file. This is useful for
+ invoking it from RPM preinst scriptlets that need to create
+ users before the first RPM file is installed since these
+ files might need to be owned by them. A new
+ %sysusers_create_inline RPM macro has been introduced to do
+ just that. systemd-sysusers now updates the shadow files as
+ well as the user/group databases, which should enhance
+ compatibility with certain tools like grpck.
+
+ * A number of bus APIs of PID 1 now optionally consult
+ PolicyKit to permit access for otherwise unprivileged
+ clients under certain conditions. Note that this currently
+ doesn't support interactive authentication yet, but this is
+ expected to be added eventually, too.
+
+ * /etc/machine-info now has new fields for configuring the
+ deployment environment of the machine, as well as the
+ location of the machine. hostnamectl has been updated with
+ new command to update these fields.
+
+ * systemd-timesyncd has been updated to automatically acquire
+ NTP server information from systemd-networkd, which might
+ have been discovered via DHCP.
+
+ * systemd-resolved now includes a caching DNS stub resolver
+ and a complete LLMNR name resolution implementation. A new
+ NSS module "nss-resolve" has been added which can be used
+ instead of glibc's own "nss-dns" to resolve hostnames via
+ systemd-resolved. Hostnames, addresses and arbitrary RRs may
+ be resolved via systemd-resolved D-Bus APIs. In contrast to
+ the glibc internal resolver systemd-resolved is aware of
+ multi-homed system, and keeps DNS server and caches separate
+ and per-interface. Queries are sent simultaneously on all
+ interfaces that have DNS servers configured, in order to
+ properly handle VPNs and local LANs which might resolve
+ separate sets of domain names. systemd-resolved may acquire
+ DNS server information from systemd-networkd automatically,
+ which in turn might have discovered them via DHCP. A tool
+ "systemd-resolve-host" has been added that may be used to
+ query the DNS logic in resolved. systemd-resolved implements
+ IDNA and automatically uses IDNA or UTF-8 encoding depending
+ on whether classic DNS or LLMNR is used as transport. In the
+ next releases we intend to add a DNSSEC and mDNS/DNS-SD
+ implementation to systemd-resolved.
+
+ * A new NSS module nss-mymachines has been added, that
+ automatically resolves the names of all local registered
+ containers to their respective IP addresses.
+
+ * A new client tool "networkctl" for systemd-networkd has been
+ added. It currently is entirely passive and will query
+ networking configuration from udev, rtnetlink and networkd,
+ and present it to the user in a very friendly
+ way. Eventually, we hope to extend it to become a full
+ control utility for networkd.
+
+ * .socket units gained a new DeferAcceptSec= setting that
+ controls the kernels' TCP_DEFER_ACCEPT sockopt for
+ TCP. Similar, support for controlling TCP keep-alive
+ settings has been added (KeepAliveTimeSec=,
+ KeepAliveIntervalSec=, KeepAliveProbes=). Also, support for
+ turning off Nagle's algorithm on TCP has been added
+ (NoDelay=).
+
+ * logind learned a new session type "web", for use in projects
+ like Cockpit which register web clients as PAM sessions.
+
+ * timer units with at least one OnCalendar= setting will now
+ be started only after timer-sync.target has been
+ reached. This way they will not elapse before the system
+ clock has been corrected by a local NTP client or
+ similar. This is particular useful on RTC-less embedded
+ machines, that come up with an invalid system clock.
+
+ * systemd-nspawn's --network-veth= switch should now result in
+ stable MAC addresses for both the outer and the inner side
+ of the link.
+
+ * systemd-nspawn gained a new --volatile= switch for running
+ container instances with /etc or /var unpopulated.
+
+ * The kdbus client code has been updated to use the new Linux
+ 3.17 memfd subsystem instead of the old kdbus-specific one.
+
+ * systemd-networkd's DHCP client and server now support
+ FORCERENEW. There are also new configuration options to
+ configure the vendor client identifier and broadcast mode
+ for DHCP.
+
+ * systemd will no longer inform the kernel about the current
+ timezone, as this is necessarily incorrect and racy as the
+ kernel has no understanding of DST and similar
+ concepts. This hence means FAT timestamps will be always
+ considered UTC, similar to what Android is already
+ doing. Also, when the RTC is configured to the local time
+ (rather than UTC) systemd will never synchronize back to it,
+ as this might confuse Windows at a later boot.
+
+ * systemd-analyze gained a new command "verify" for offline
+ validation of unit files.
+
+ * systemd-networkd gained support for a couple of additional
+ settings for bonding networking setups. Also, the metric for
+ statically configured routes may now be configured. For
+ network interfaces where this is appropriate the peer IP
+ address may now be configured.
+
+ * systemd-networkd's DHCP client will no longer request
+ broadcasting by default, as this tripped up some networks.
+ For hardware where broadcast is required the feature should
+ be switched back on using RequestBroadcast=yes.
+
+ * systemd-networkd will now set up IPv4LL addresses (when
+ enabled) even if DHCP is configured successfully.
+
+ * udev will now default to respect network device names given
+ by the kernel when the kernel indicates that these are
+ predictable. This behavior can be tweaked by changing
+ NamePolicy= in the relevant .link file.
+
+ * A new library systemd-terminal has been added that
+ implements full TTY stream parsing and rendering. This
+ library is supposed to be used later on for implementing a
+ full userspace VT subsystem, replacing the current kernel
+ implementation.
+
+ * A new tool systemd-journal-upload has been added to push
+ journal data to a remote system running
+ systemd-journal-remote.
+
+ * journald will no longer forward all local data to another
+ running syslog daemon. This change has been made because
+ rsyslog (which appears to be the most commonly used syslog
+ implementation these days) no longer makes use of this, and
+ instead pulls the data out of the journal on its own. Since
+ forwarding the messages to a non-existent syslog server is
+ more expensive than we assumed we have now turned this
+ off. If you run a syslog server that is not a recent rsyslog
+ version, you have to turn this option on again
+ (ForwardToSyslog= in journald.conf).
+
+ * journald now optionally supports the LZ4 compressor for
+ larger journal fields. This compressor should perform much
+ better than XZ which was the previous default.
+
+ * machinectl now shows the IP addresses of local containers,
+ if it knows them, plus the interface name of the container.
+
+ * A new tool "systemd-escape" has been added that makes it
+ easy to escape strings to build unit names and similar.
+
+ * sd_notify() messages may now include a new ERRNO= field
+ which is parsed and collected by systemd and shown among the
+ "systemctl status" output for a service.
+
+ * A new component "systemd-firstboot" has been added that
+ queries the most basic systemd information (timezone,
+ hostname, root password) interactively on first
+ boot. Alternatively it may also be used to provision these
+ things offline on OS images installed into directories.
+
+ * The default sysctl.d/ snippets will now set
+
+ net.ipv4.conf.default.promote_secondaries=1
+
+ This has the benefit of no flushing secondary IP addresses
+ when primary addresses are removed.
+
+ Contributions from: Ansgar Burchardt, Bastien Nocera, Colin
+ Walters, Dan Dedrick, Daniel Buch, Daniel Korostil, Daniel
+ Mack, Dan Williams, Dave Reisner, David Herrmann, Denis
+ Kenzior, Eelco Dolstra, Eric Cook, Hannes Reinecke, Harald
+ Hoyer, Hong Shick Pak, Hui Wang, Jean-André Santoni, Jóhann
+ B. Guðmundsson, Jon Severinsson, Karel Zak, Kay Sievers, Kevin
+ Wells, Lennart Poettering, Lukas Nykryn, Mantas Mikulėnas,
+ Marc-Antoine Perennou, Martin Pitt, Michael Biebl, Michael
+ Marineau, Michael Olbrich, Michal Schmidt, Michal Sekletar,
+ Miguel Angel Ajo, Mike Gilbert, Olivier Brunel, Robert
+ Schiele, Ronny Chevalier, Simon McVittie, Sjoerd Simons, Stef
+ Walter, Steven Noonan, Susant Sahani, Tanu Kaskinen, Thomas
+ Blume, Thomas Hindoe Paaboel Andersen, Timofey Titovets,
+ Tobias Geerinckx-Rice, Tomasz Torcz, Tom Gundersen, Umut
+ Tezduyar Lindskog, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-08-19
+
+CHANGES WITH 215:
+
+ * A new tool systemd-sysusers has been added. This tool
+ creates system users and groups in /etc/passwd and
+ /etc/group, based on static declarative system user/group
+ definitions in /usr/lib/sysusers.d/. This is useful to
+ enable factory resets and volatile systems that boot up with
+ an empty /etc directory, and thus need system users and
+ groups created during early boot. systemd now also ships
+ with two default sysusers.d/ files for the most basic
+ users and groups systemd and the core operating system
+ require.
+
+ * A new tmpfiles snippet has been added that rebuilds the
+ essential files in /etc on boot, should they be missing.
+
+ * A directive for ensuring automatic clean-up of
+ /var/cache/man/ has been removed from the default
+ configuration. This line should now be shipped by the man
+ implementation. The necessary change has been made to the
+ man-db implementation. Note that you need to update your man
+ implementation to one that ships this line, otherwise no
+ automatic clean-up of /var/cache/man will take place.
+
+ * A new condition ConditionNeedsUpdate= has been added that
+ may conditionalize services to only run when /etc or /var
+ are "older" than the vendor operating system resources in
+ /usr. This is useful for reconstructing or updating /etc
+ after an offline update of /usr or a factory reset, on the
+ next reboot. Services that want to run once after such an
+ update or reset should use this condition and order
+ themselves before the new systemd-update-done.service, which
+ will mark the two directories as fully updated. A number of
+ service files have been added making use of this, to rebuild
+ the udev hardware database, the journald message catalog and
+ dynamic loader cache (ldconfig). The systemd-sysusers tool
+ described above also makes use of this now. With this in
+ place it is now possible to start up a minimal operating
+ system with /etc empty cleanly. For more information on the
+ concepts involved see this recent blog story:
+
+ http://0pointer.de/blog/projects/stateless.html
+
+ * A new system group "input" has been introduced, and all
+ input device nodes get this group assigned. This is useful
+ for system-level software to get access to input devices. It
+ complements what is already done for "audio" and "video".
+
+ * systemd-networkd learnt minimal DHCPv4 server support in
+ addition to the existing DHCPv4 client support. It also
+ learnt DHCPv6 client and IPv6 Router Solicitation client
+ support. The DHCPv4 client gained support for static routes
+ passed in from the server. Note that the [DHCPv4] section
+ known in older systemd-networkd versions has been renamed to
+ [DHCP] and is now also used by the DHCPv6 client. Existing
+ .network files using settings of this section should be
+ updated, though compatibility is maintained. Optionally, the
+ client hostname may now be sent to the DHCP server.
+
+ * networkd gained support for vxlan virtual networks as well
+ as tun/tap and dummy devices.
+
+ * networkd gained support for automatic allocation of address
+ ranges for interfaces from a system-wide pool of
+ addresses. This is useful for dynamically managing a large
+ number of interfaces with a single network configuration
+ file. In particular this is useful to easily assign
+ appropriate IP addresses to the veth links of a large number
+ of nspawn instances.
+
+ * RPM macros for processing sysusers, sysctl and binfmt
+ drop-in snippets at package installation time have been
+ added.
+
+ * The /etc/os-release file should now be placed in
+ /usr/lib/os-release. The old location is automatically
+ created as symlink. /usr/lib is the more appropriate
+ location of this file, since it shall actually describe the
+ vendor operating system shipped in /usr, and not the
+ configuration stored in /etc.
+
+ * .mount units gained a new boolean SloppyOptions= setting
+ that maps to mount(8)'s -s option which enables permissive
+ parsing of unknown mount options.
+
+ * tmpfiles learnt a new "L+" directive which creates a symlink
+ but (unlike "L") deletes a pre-existing file first, should
+ it already exist and not already be the correct
+ symlink. Similar, "b+", "c+" and "p+" directives have been
+ added as well, which create block and character devices, as
+ well as fifos in the filesystem, possibly removing any
+ pre-existing files of different types.
+
+ * For tmpfiles' "L", "L+", "C" and "C+" directives the final
+ 'argument' field (which so far specified the source to
+ symlink/copy the files from) is now optional. If omitted the
+ same file os copied from /usr/share/factory/ suffixed by the
+ full destination path. This is useful for populating /etc
+ with essential files, by copying them from vendor defaults
+ shipped in /usr/share/factory/etc.
+
+ * A new command "systemctl preset-all" has been added that
+ applies the service preset settings to all installed unit
+ files. A new switch --preset-mode= has been added that
+ controls whether only enable or only disable operations
+ shall be executed.
+
+ * A new command "systemctl is-system-running" has been added
+ that allows checking the overall state of the system, for
+ example whether it is fully up and running.
+
+ * When the system boots up with an empty /etc, the equivalent
+ to "systemctl preset-all" is executed during early boot, to
+ make sure all default services are enabled after a factory
+ reset.
+
+ * systemd now contains a minimal preset file that enables the
+ most basic services systemd ships by default.
+
+ * Unit files' [Install] section gained a new DefaultInstance=
+ field for defining the default instance to create if a
+ template unit is enabled with no instance specified.
+
+ * A new passive target cryptsetup-pre.target has been added
+ that may be used by services that need to make they run and
+ finish before the first LUKS cryptographic device is set up.
+
+ * The /dev/loop-control and /dev/btrfs-control device nodes
+ are now owned by the "disk" group by default, opening up
+ access to this group.
+
+ * systemd-coredump will now automatically generate a
+ stack trace of all core dumps taking place on the system,
+ based on elfutils' libdw library. This stack trace is logged
+ to the journal.
+
+ * systemd-coredump may now optionally store coredumps directly
+ on disk (in /var/lib/systemd/coredump, possibly compressed),
+ instead of storing them unconditionally in the journal. This
+ mode is the new default. A new configuration file
+ /etc/systemd/coredump.conf has been added to configure this
+ and other parameters of systemd-coredump.
+
+ * coredumpctl gained a new "info" verb to show details about a
+ specific coredump. A new switch "-1" has also been added
+ that makes sure to only show information about the most
+ recent entry instead of all entries. Also, as the tool is
+ generally useful now the "systemd-" prefix of the binary
+ name has been removed. Distributions that want to maintain
+ compatibility with the old name should add a symlink from
+ the old name to the new name.
+
+ * journald's SplitMode= now defaults to "uid". This makes sure
+ that unprivileged users can access their own coredumps with
+ coredumpctl without restrictions.
+
+ * New kernel command line options "systemd.wants=" (for
+ pulling an additional unit during boot), "systemd.mask="
+ (for masking a specific unit for the boot), and
+ "systemd.debug-shell" (for enabling the debug shell on tty9)
+ have been added. This is implemented in the new generator
+ "systemd-debug-generator".
+
+ * systemd-nspawn will now by default filter a couple of
+ syscalls for containers, among them those required for
+ kernel module loading, direct x86 IO port access, swap
+ management, and kexec. Most importantly though
+ open_by_handle_at() is now prohibited for containers,
+ closing a hole similar to a recently discussed vulnerability
+ in docker regarding access to files on file hierarchies the
+ container should normally not have access to. Note that for
+ nspawn we generally make no security claims anyway (and
+ this is explicitly documented in the man page), so this is
+ just a fix for one of the most obvious problems.
+
+ * A new man page file-hierarchy(7) has been added that
+ contains a minimized, modernized version of the file system
+ layout systemd expects, similar in style to the FHS
+ specification or hier(5). A new tool systemd-path(1) has
+ been added to query many of these paths for the local
+ machine and user.
+
+ * Automatic time-based clean-up of $XDG_RUNTIME_DIR is no
+ longer done. Since the directory now has a per-user size
+ limit, and is cleaned on logout this appears unnecessary,
+ in particular since this now brings the lifecycle of this
+ directory closer in line with how IPC objects are handled.
+
+ * systemd.pc now exports a number of additional directories,
+ including $libdir (which is useful to identify the library
+ path for the primary architecture of the system), and a
+ couple of drop-in directories.
+
+ * udev's predictable network interface names now use the dev_port
+ sysfs attribute, introduced in linux 3.15 instead of dev_id to
+ distinguish between ports of the same PCI function. dev_id should
+ only be used for ports using the same HW address, hence the need
+ for dev_port.
+
+ * machined has been updated to export the OS version of a
+ container (read from /etc/os-release and
+ /usr/lib/os-release) on the bus. This is now shown in
+ "machinectl status" for a machine.
+
+ * A new service setting RestartForceExitStatus= has been
+ added. If configured to a set of exit signals or process
+ return values, the service will be restarted when the main
+ daemon process exits with any of them, regardless of the
+ Restart= setting.
+
+ * systemctl's -H switch for connecting to remote systemd
+ machines has been extended so that it may be used to
+ directly connect to a specific container on the
+ host. "systemctl -H root@foobar:waldi" will now connect as
+ user "root" to host "foobar", and then proceed directly to
+ the container named "waldi". Note that currently you have to
+ authenticate as user "root" for this to work, as entering
+ containers is a privileged operation.
+
+ Contributions from: Andreas Henriksson, Benjamin Steinwender,
+ Carl Schaefer, Christian Hesse, Colin Ian King, Cristian
+ Rodríguez, Daniel Mack, Dave Reisner, David Herrmann, Eugene
+ Yakubovich, Filipe Brandenburger, Frederic Crozat, Hristo
+ Venev, Jan Engelhardt, Jonathan Boulle, Kay Sievers, Lennart
+ Poettering, Luke Shumaker, Mantas Mikulėnas, Marc-Antoine
+ Perennou, Marcel Holtmann, Michael Marineau, Michael Olbrich,
+ Michał Bartoszkiewicz, Michal Sekletar, Patrik Flykt, Ronan Le
+ Martret, Ronny Chevalier, Ruediger Oertel, Steven Noonan,
+ Susant Sahani, Thadeu Lima de Souza Cascardo, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Tom Hirst, Umut Tezduyar
+ Lindskog, Uoti Urpala, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-07-03
+
CHANGES WITH 214:
* As an experimental feature, udev now tries to lock the
was opened for writing, the close will trigger a partition
table rescan in udev's "watch" facility, and if needed
synthesize "change" events for the disk and all its partitions.
- This is now unconditionally enabled, if it turns out to
+ This is now unconditionally enabled, and if it turns out to
cause major problems, we might turn it on only for specific
- devices, or might need to disable it entirely. Device-mapper
+ devices, or might need to disable it entirely. Device Mapper
devices are excluded from this logic.
* We temporarily dropped the "-l" switch for fsck invocations,
change has been released.
* The dependency on libattr has been removed. Since a long
- time the extended attribute calls have moved to glibc, and
+ time, the extended attribute calls have moved to glibc, and
libattr is thus unnecessary.
* Virtualization detection works without priviliges now. This
* systemd-networkd will no longer automatically attempt to
manually load kernel modules necessary for certain tunnel
- transports. Instead it is assumed the kernel loads them
+ transports. Instead, it is assumed the kernel loads them
automatically when required. This only works correctly on
very new kernels. On older kernels, please consider adding
- the kernel modules to /etc/load-modules.d/ as a work-around.
+ the kernel modules to /etc/modules-load.d/ as a work-around.
+
+ * The resolv.conf file systemd-resolved generates has been
+ moved to /run/systemd/resolve/. If you have a symlink from
+ /etc/resolv.conf, it might be necessary to correct it.
- * Two new service settings ProtectedHome= and ProtectedSystem=
- have been added. When enabled they will make the user data
+ * Two new service settings, ProtectHome= and ProtectSystem=,
+ have been added. When enabled, they will make the user data
(such as /home) inaccessible or read-only and the system
(such as /usr) read-only, for specific services. This allows
very light-weight per-service sandboxing to avoid
settings to set the owner user and group of AF_UNIX sockets
and FIFOs in the file system.
- * Socket units gained a new RemoveOnStop= setting. If enabled
+ * Socket units gained a new RemoveOnStop= setting. If enabled,
all FIFOS and sockets in the file system will be removed
when the specific socket unit is stopped.
* Socket units gained a new Symlinks= setting. It takes a list
of symlinks to create to file system sockets or FIFOs
- created by the specific unix sockets. This is useful to
+ created by the specific Unix sockets. This is useful to
manage symlinks to socket nodes with the same life-cycle as
the socket itself.
vanished.
* A new "on-abnormal" setting for Restart= has been added. If
- set it will result in automatic restarts on all "abnormal"
+ set, it will result in automatic restarts on all "abnormal"
reasons for a process to exit, which includes unclean
signals, core dumps, timeouts and watchdog timeouts, but
does not include clean and unclean exit codes or clean
files or entire directories.
* systemd-tmpfiles "m" lines are now fully equivalent to "z"
- lines. So far they have been non-globbing versions of the
- latter, and have thus been redundant. In future it is
- recommended to only use "z"; and "m" has hence been removed
+ lines. So far, they have been non-globbing versions of the
+ latter, and have thus been redundant. In future, it is
+ recommended to only use "z". "m" has hence been removed
from the documentation, even though it stays supported.
* A tmpfiles snippet to recreate the most basic structure in
/var has been added. This is enough to create the /var/run →
/run symlink and create a couple of structural
directories. This allows systems to boot up with an empty or
- volatile /var. Of course, while with this change the core OS
- now is capable with dealing with a volatile /var not all
+ volatile /var. Of course, while with this change, the core OS
+ now is capable with dealing with a volatile /var, not all
user services are ready for it. However, we hope that sooner
- or later many service daemons will be changed upstream so
+ or later, many service daemons will be changed upstream so
that they are able to automatically create their necessary
directories in /var at boot, should they be missing. This is
the first step to allow state-less systems that only require
* Access modes specified in tmpfiles snippets may now be
prefixed with "~", which indicates that they shall be masked
- by whether the existing file or directly is currently
- writable, readable or executable at all. Also, if specified
+ by whether the existing file or directory is currently
+ writable, readable or executable at all. Also, if specified,
the sgid/suid/sticky bits will be masked for all
non-directories.
added which is useful for services that shall run before any
network is configured, for example firewall scripts.
+ * The "floppy" group that previously owned the /dev/fd*
+ devices is no longer used. The "disk" group is now used
+ instead. Distributions should probably deprecate usage of
+ this group.
+
+ Contributions from: Camilo Aguilar, Christian Hesse, Colin Ian
+ King, Cristian Rodríguez, Daniel Buch, Dave Reisner, David
+ Strauss, Denis Tikhomirov, John, Jonathan Liu, Kay Sievers,
+ Lennart Poettering, Mantas Mikulėnas, Mark Eichin, Ronny
+ Chevalier, Susant Sahani, Thomas Blume, Thomas Hindoe Paaboel
+ Andersen, Tom Gundersen, Umut Tezduyar Lindskog, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Berlin, 2014-06-11
+
CHANGES WITH 213:
* A new "systemd-timesyncd" daemon has been added for
synchronizing the system clock across the network. It
implements an SNTP client. In contrast to NTP
- implementations such as chrony or the NTP reference server
+ implementations such as chrony or the NTP reference server,
this only implements a client side, and does not bother with
the full NTP complexity, focusing only on querying time from
one remote server and synchronizing the local clock to
it. Unless you intend to serve NTP to networked clients or
- want to connect to local hardware clocks this simple NTP
+ want to connect to local hardware clocks, this simple NTP
client should be more than appropriate for most
installations. The daemon runs with minimal privileges, and
has been hooked up with networkd to only operate when
acquired, and uses this to possibly correct the system clock
early at bootup, in order to accommodate for systems that
lack an RTC such as the Raspberry Pi and embedded devices,
- and make sure that time monotonically progresses on these
+ and to make sure that time monotonically progresses on these
systems, even if it is not always correct. To make use of
- this daemon a new system user and group "systemd-timesync"
+ this daemon, a new system user and group "systemd-timesync"
needs to be created on installation of systemd.
* The queue "seqnum" interface of libudev has been disabled, as
* A new FailureAction= setting has been added for service
units which may be used to specify an operation to trigger
when a service fails. This works similarly to
- StartLimitAction=, but unlike it controls what is done
+ StartLimitAction=, but unlike it, controls what is done
immediately rather than only after several attempts to
restart the service in question.
* hostnamed has been changed to prefer the statically
configured hostname in /etc/hostname (unless set to
'localhost' or empty) over any dynamic one supplied by
- dhcp. With this change the rules for picking the hostname
+ dhcp. With this change, the rules for picking the hostname
match more closely the rules of other configuration settings
where the local administrator's configuration in /etc always
overrides any other settings.
one of the next releases, at the same time that we will
declare the APIs stable.
- * When the kernel command-line argument "kdbus" is specified,
+ * When the kernel command line argument "kdbus" is specified,
systemd will automatically load the kdbus.ko kernel module. At
this stage of development, it is only useful for testing kdbus
and should not be used in production. Note: if "--enable-kdbus"
kernel, and on seats that are not seat0.
* A new kernel command line option luks.options= is understood
- now which allows specifiying LUKS options for usage for LUKS
+ now which allows specifying LUKS options for usage for LUKS
encrypted partitions specified with luks.uuid=.
* tmpfiles.d(5) snippets may now use specifier expansion in
certain paths from operation.
* journald will now automatically flush all messages to disk
- as soon as a message of the log priorities CRIT, ALERT or
- EMERG is received.
+ as soon as a message at the log level CRIT, ALERT or EMERG
+ is received.
Contributions from: Andrew Cook, Brandon Philips, Christian
Hesse, Christoph Junghans, Colin Walters, Daniel Schaal,
~ianmdlvl / elogind.git / blobdiff