systemd System and Service Manager
+CHANGES WITH 216:
+ * timedated does no longer read NTP unit names from
+ /usr/lib/systemd/ntp-units.d/*.list. Alternative NTP
+ implementations should add a:
+ Conflicts=systemd-timesyncd.service
+ to take over and replace systemd's NTP functionality.
+
CHANGES WITH 215:
- * A new system group "input" is introduced, and all input
- device nodes get this group assigned. This is useful for
- system-level software to get access to input devices. It
+
+ * A new tool systemd-sysusers has been added. This tool
+ creates system users and groups in /etc/passwd and
+ /etc/group, based on static declarative system user/group
+ definitions in /usr/lib/sysusers.d/. This is useful to
+ enable factory resets and volatile systems that boot up with
+ an empty /etc directory, and thus need system users and
+ groups created during early boot. systemd now also ships
+ with two default sysusers.d/ files for the most basic
+ users and groups systemd and the core operating system
+ require.
+
+ * A new tmpfiles snippet has been added that rebuilds the
+ essential files in /etc on boot, should they be missing.
+
+ * A directive for ensuring automatic clean-up of
+ /var/cache/man/ has been removed from the default
+ configuration. This line should now be shipped by the man
+ implementation. The necessary change has been made to the
+ man-db implementation. Note that you need to update your man
+ implementation to one that ships this line, otherwise no
+ automatic clean-up of /var/cache/man will take place.
+
+ * A new condition ConditionNeedsUpdate= has been added that
+ may conditionalize services to only run when /etc or /var
+ are "older" than the vendor operating system resources in
+ /usr. This is useful for reconstructing or updating /etc
+ after an offline update of /usr or a factory reset, on the
+ next reboot. Services that want to run once after such an
+ update or reset should use this condition and order
+ themselves before the new systemd-update-done.service, which
+ will mark the two directories as fully updated. A number of
+ service files have been added making use of this, to rebuild
+ the udev hardware database, the journald message catalog and
+ dynamic loader cache (ldconfig). The systemd-sysusers tool
+ described above also makes use of this now. With this in
+ place it is now possible to start up a minimal operating
+ system with /etc empty cleanly. For more information on the
+ concepts involved see this recent blog story:
+
+ http://0pointer.de/blog/projects/stateless.html
+
+ * A new system group "input" has been introduced, and all
+ input device nodes get this group assigned. This is useful
+ for system-level software to get access to input devices. It
complements what is already done for "audio" and "video".
+ * systemd-networkd learnt minimal DHCPv4 server support in
+ addition to the existing DHCPv4 client support. It also
+ learnt DHCPv6 client and IPv6 Router Solicitation client
+ support. The DHCPv4 client gained support for static routes
+ passed in from the server. Note that the [DHCPv4] section
+ known in older systemd-networkd versions has been renamed to
+ [DHCP] and is now also used by the DHCPv6 client. Existing
+ .network files using settings of this section should be
+ updated, though compatibility is maintained. Optionally, the
+ client hostname may now be sent to the DHCP server.
+
+ * networkd gained support for vxlan virtual networks as well
+ as tun/tap and dummy devices.
+
+ * networkd gained support for automatic allocation of address
+ ranges for interfaces from a system-wide pool of
+ addresses. This is useful for dynamically managing a large
+ number of interfaces with a single network configuration
+ file. In particular this is useful to easily assign
+ appropriate IP addresses to the veth links of a large number
+ of nspawn instances.
+
+ * RPM macros for processing sysusers, sysctl and binfmt
+ drop-in snippets at package installation time have been
+ added.
+
+ * The /etc/os-release file should now be placed in
+ /usr/lib/os-release. The old location is automatically
+ created as symlink. /usr/lib is the more appropriate
+ location of this file, since it shall actually describe the
+ vendor operating system shipped in /usr, and not the
+ configuration stored in /etc.
+
+ * .mount units gained a new boolean SloppyOptions= setting
+ that maps to mount(8)'s -s option which enables permissive
+ parsing of unknown mount options.
+
+ * tmpfiles learnt a new "L+" directive which creates a symlink
+ but (unlike "L") deletes a pre-existing file first, should
+ it already exist and not already be the correct
+ symlink. Similar, "b+", "c+" and "p+" directives have been
+ added as well, which create block and character devices, as
+ well as fifos in the filesystem, possibly removing any
+ pre-existing files of different types.
+
+ * For tmpfiles' "L", "L+", "C" and "C+" directives the final
+ 'argument' field (which so far specified the source to
+ symlink/copy the files from) is now optional. If omitted the
+ same file os copied from /usr/share/factory/ suffixed by the
+ full destination path. This is useful for populating /etc
+ with essential files, by copying them from vendor defaults
+ shipped in /usr/share/factory/etc.
+
+ * A new command "systemctl preset-all" has been added that
+ applies the service preset settings to all installed unit
+ files. A new switch --preset-mode= has been added that
+ controls whether only enable or only disable operations
+ shall be executed.
+
+ * A new command "systemctl is-system-running" has been added
+ that allows checking the overall state of the system, for
+ example whether it is fully up and running.
+
+ * When the system boots up with an empty /etc, the equivalent
+ to "systemctl preset-all" is executed during early boot, to
+ make sure all default services are enabled after a factory
+ reset.
+
+ * systemd now contains a minimal preset file that enables the
+ most basic services systemd ships by default.
+
+ * Unit files' [Install] section gained a new DefaultInstance=
+ field for defining the default instance to create if a
+ template unit is enabled with no instance specified.
+
+ * A new passive target cryptsetup-pre.target has been added
+ that may be used by services that need to make they run and
+ finish before the first LUKS cryptographic device is set up.
+
+ * The /dev/loop-control and /dev/btrfs-control device nodes
+ are now owned by the "disk" group by default, opening up
+ access to this group.
+
+ * systemd-coredump will now automatically generate a
+ stack trace of all core dumps taking place on the system,
+ based on elfutils' libdw library. This stack trace is logged
+ to the journal.
+
+ * systemd-coredump may now optionally store coredumps directly
+ on disk (in /var/lib/systemd/coredump, possibly compressed),
+ instead of storing them unconditionally in the journal. This
+ mode is the new default. A new configuration file
+ /etc/systemd/coredump.conf has been added to configure this
+ and other parameters of systemd-coredump.
+
+ * coredumpctl gained a new "info" verb to show details about a
+ specific coredump. A new switch "-1" has also been added
+ that makes sure to only show information about the most
+ recent entry instead of all entries. Also, as the tool is
+ generally useful now the "systemd-" prefix of the binary
+ name has been removed. Distributions that want to maintain
+ compatibility with the old name should add a symlink from
+ the old name to the new name.
+
+ * journald's SplitMode= now defaults to "uid". This makes sure
+ that unprivileged users can access their own coredumps with
+ coredumpctl without restrictions.
+
+ * New kernel command line options "systemd.wants=" (for
+ pulling an additional unit during boot), "systemd.mask="
+ (for masking a specific unit for the boot), and
+ "systemd.debug-shell" (for enabling the debug shell on tty9)
+ have been added. This is implemented in the new generator
+ "systemd-debug-generator".
+
+ * systemd-nspawn will now by default filter a couple of
+ syscalls for containers, among them those required for
+ kernel module loading, direct x86 IO port access, swap
+ management, and kexec. Most importantly though
+ open_by_handle_at() is now prohibited for containers,
+ closing a hole similar to a recently discussed vulnerability
+ in docker regarding access to files on file hierarchies the
+ container should normally not have access to. Note that for
+ nspawn we generally make no security claims anyway (and
+ this is explicitly documented in the man page), so this is
+ just a fix for one of the most obvious problems.
+
+ * A new man page file-hierarchy(7) has been added that
+ contains a minimized, modernized version of the file system
+ layout systemd expects, similar in style to the FHS
+ specification or hier(5). A new tool systemd-path(1) has
+ been added to query many of these paths for the local
+ machine and user.
+
+ * Automatic time-based clean-up of $XDG_RUNTIME_DIR is no
+ longer done. Since the directory now has a per-user size
+ limit, and is cleaned on logout this appears unnecessary,
+ in particular since this now brings the lifecycle of this
+ directory closer in line with how IPC objects are handled.
+
+ * systemd.pc now exports a number of additional directories,
+ including $libdir (which is useful to identify the library
+ path for the primary architecture of the system), and a
+ couple of drop-in directories.
+
+ * udev's predictable network interface names now use the dev_port
+ sysfs attribute, introduced in linux 3.15 instead of dev_id to
+ distinguish between ports of the same PCI function. dev_id should
+ only be used for ports using the same HW address, hence the need
+ for dev_port.
+
+ * machined has been updated to export the OS version of a
+ container (read from /etc/os-release and
+ /usr/lib/os-release) on the bus. This is now shown in
+ "machinectl status" for a machine.
+
+ * A new service setting RestartForceExitStatus= has been
+ added. If configured to a set of exit signals or process
+ return values, the service will be restarted when the main
+ daemon process exits with any of them, regardless of the
+ Restart= setting.
+
+ * systemctl's -H switch for connecting to remote systemd
+ machines has been extended so that it may be used to
+ directly connect to a specific container on the
+ host. "systemctl -H root@foobar:waldi" will now connect as
+ user "root" to host "foobar", and then proceed directly to
+ the container named "waldi". Note that currently you have to
+ authenticate as user "root" for this to work, as entering
+ containers is a privileged operation.
+
+ Contributions from: Andreas Henriksson, Benjamin Steinwender,
+ Carl Schaefer, Christian Hesse, Colin Ian King, Cristian
+ Rodríguez, Daniel Mack, Dave Reisner, David Herrmann, Eugene
+ Yakubovich, Filipe Brandenburger, Frederic Crozat, Hristo
+ Venev, Jan Engelhardt, Jonathan Boulle, Kay Sievers, Lennart
+ Poettering, Luke Shumaker, Mantas Mikulėnas, Marc-Antoine
+ Perennou, Marcel Holtmann, Michael Marineau, Michael Olbrich,
+ Michał Bartoszkiewicz, Michal Sekletar, Patrik Flykt, Ronan Le
+ Martret, Ronny Chevalier, Ruediger Oertel, Steven Noonan,
+ Susant Sahani, Thadeu Lima de Souza Cascardo, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Tom Hirst, Umut Tezduyar
+ Lindskog, Uoti Urpala, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-07-03
+
CHANGES WITH 214:
* As an experimental feature, udev now tries to lock the
synthesize "change" events for the disk and all its partitions.
This is now unconditionally enabled, and if it turns out to
cause major problems, we might turn it on only for specific
- devices, or might need to disable it entirely. Device-mapper
+ devices, or might need to disable it entirely. Device Mapper
devices are excluded from this logic.
* We temporarily dropped the "-l" switch for fsck invocations,
* Socket units gained a new Symlinks= setting. It takes a list
of symlinks to create to file system sockets or FIFOs
- created by the specific unix sockets. This is useful to
+ created by the specific Unix sockets. This is useful to
manage symlinks to socket nodes with the same life-cycle as
the socket itself.
~ianmdlvl / elogind.git / blobdiff