+udev 162
+========
+Bugfixes.
+
+udev 161
+========
+Bugfixes.
+
+udev 160
+========
+Bugfixes.
+
+udev 159
+========
+Bugfixes.
+
+New and fixed keymaps.
+
+Install systemd service files if applicable.
+
+udev 158
+========
+Bugfixes.
+
+All distribution specific rules are removed from the udev source tree,
+most of them are no longer needed. The Gentoo rules which allow to support
+older kernel versions, which are not covered by the default rules anymore
+has moved to rules/misc/30-kernel-compat.rules.
+
+udev 157
+========
+Bugfixes.
+
+The option --debug-trace and the environemnt variable UDEVD_MAX_CHILDS=
+was removed from udevd.
+
+Udevd now checks the kernel commandline for the following variables:
+ udev.log-priority=<syslog priority>
+ udev.children-max=<maximum number of workers>
+ udev.exec-delay=<seconds to delay the execution of RUN=>
+to help debuging coldplug setups where the loading of a kernel
+module crashes the system.
+
+The subdirectory in the source tree rules/packages has been renamed to
+rules/arch, anc contains only architecture specific rules now.
+
+udev 156
+========
+Bugfixes.
+
+udev 155
+========
+Bugfixes.
+
+Now the udev daemon itself, does on startup:
+ - copy the content of /lib/udev/devices to /dev
+ - create the standard symlinks like /dev/std{in,out,err},
+ /dev/core, /dev/fd, ...
+ - use static node information provided by kernel modules
+ and creates these nodes to allow module on-demand loading
+ - possibly apply permissions to all ststic nodes from udev
+ rules which are annotated to match a static node
+
+The default mode for a device node is 0600 now to match the kernel
+created devtmpfs defaults. If GROUP= is specified and no MODE= is
+given the default will be 0660.
+
+udev 154
+========
+Bugfixes.
+
+Udev now gradually starts to pass control over the primary device nodes
+and their names to the kernel, and will in the end only manage the
+permissions of the node, and possibly create additional symlinks.
+As a first step NAME="" will be ignored, and NAME= setings with names
+other than the kernel provided name will result in a logged warning.
+Kernels that don't provide device names, or devtmpfs is not used, will
+still work as they did before, but it is strongly recommended to use
+only the same names for the primary device node as the recent kernel
+provides for all devices.
+
+udev 153
+========
+Fix broken firmware loader search path.
+
+udev 152
+========
+Bugfixes.
+
+"udevadm trigger" defaults to "change" events now instead of "add"
+events. The "udev boot script" might need to add "--action=add" to
+the trigger command if not already there, in case the initial coldplug
+events are expected as "add" events.
+
+The option "all_partitons" was removed from udev. This should not be
+needed for usual hardware. Udev can not safely make assumptions
+about non-existing partition major/minor numbers, and therefore no
+longer provide this unreliable and unsafe option.
+
+The option "ignore_remove" was removed from udev. With devtmpfs
+udev passed control over device nodes to the kernel. This option
+should not be needed, or can not work as advertised. Neither
+udev nor the kernel will remove device nodes which are copied from
+the /lib/udev/devices/ directory.
+
+All "add|change" matches are replaced by "!remove" in the rules and
+in the udev logic. All types of events will update possible symlinks
+and permissions, only "remove" is handled special now.
+
+The modem modeswitch extra was removed and the external usb_modeswitch
+program should be used instead.
+
+New and fixed keymaps.
+
+udev 151
+========
+Bugfixes.
+
+udev 150
+========
+Bugfixes.
+
+Kernels with SYSFS_DEPRECATED=y are not supported since a while. Many users
+depend on the current sysfs layout and the information not available in the
+deprecated layout. All remaining support for the deprecated sysfs layout is
+removed now.
+
+udev 149
+========
+Fix for a possible endless loop in the new input_id program.
+
+udev 148
+========
+Bugfixes.
+
+The option "ignore_device" does no longer exist. There is no way to
+ignore an event, as libudev events can not be suppressed by rules.
+It only prevented RUN keys from being executed, which results in an
+inconsistent behavior in current setups.
+
+BUS=, SYSFS{}=, ID= are long deprecated and should be SUBSYSTEM(S)=,
+ATTR(S){}=, KERNEL(S)=. It will cause a warning once for every rule
+file from now on.
+
+The support for the deprecated IDE devices has been removed from the
+default set of rules. Distros who still care about non-libata drivers
+need to add the rules to the compat rules file.
+
+The ID_CLASS property on input devices has been replaced by the more accurate
+set of flags ID_INPUT_{KEYBOARD,KEY,MOUSE,TOUCHPAD,TABLET,JOYSTICK}. These are
+determined by the new "input_id" prober now. Some devices, such as touchpads,
+can have several classes. So if you previously had custom udev rules which e. g.
+checked for ENV{ID_CLASS}=="kbd", you need to replace this with
+ENV{ID_INPUT_KEYBOARD}=="?*".
+
+udev 147
+========
+Bugfixes.
+
+To support DEVPATH strings larger than the maximum file name length, the
+private udev database format has changed. If some software still reads the
+private files in /dev/.udev/, which it shouldn't, now it's time to fix it.
+Please do not port anything to the new format again, everything in /dev/.udev
+is and always was private to udev, and may and will change any time without
+prior notice.
+
+Multiple devices claiming the same names in /dev are limited to symlinks
+only now. Mixing identical symlink names and node names is not supported.
+This reduces the amount of data in the database significantly.
+
+NAME="%k" causes a warning now. It's is and always was completely superfluous.
+It will break kernel supplied DEVNAMEs and therefore it needs to be removed
+from all rules.
+
+Most NAME= instructions got removed. Kernel 2.6.31 supplies the needed names
+if they are not the default. To support older kernels, the NAME= rules need to
+be added to the compat rules file.
+
+Symlinks to udevadm with the old command names are no longer resolved to
+the udevadm commands.
+
+The udev-acl tool got adopted to changes in ConsoleKit. Version 0.4.1 is
+required now.
+
+The option "last_rule" does no longer exist. Its use breaks too many
+things which expect to be run from independent later rules, and is an idication
+that something needs to be fixed properly instead.
+
+The gudev API is no longer marked as experimental,
+G_UDEV_API_IS_SUBJECT_TO_CHANGE is no longer needed. The gudev introspection
+is enabled by default now. Various projects already depend on introspection
+information to bind dynamic languages to the gudev interfaces.
+
+udev 146
+========
+Bugfixes.
+
+The udevadm trigger "--retry-failed" option, which is replaced since quite
+a while by "--type=failed" is removed.
+
+The failed tracking was not working at all for a few releases. The RUN
+option "ignore_error" is replaced by a "fail_event_on_error" option, and the
+default is not to track any failing RUN executions.
+
+New keymaps, new modem, hid2hci updated.
+
+udev 145
+========
+Fix possible crash in udevd when worker processes are busy, rules are
+changed at the same time, and workers get killed to reload the rules.
+
+udev 144
+========
+Bugfixes.
+
+Properties set with ENV{.FOO}="bar" are marked private by starting the
+name with a '.'. They will not be stored in the database, and not be
+exported with the event.
+
+Firmware files are looked up in:
+ /lib/firmware/updates/$(uname -r)
+ /lib/firmware/updates
+ /lib/firmware/$(uname -r)
+ /lib/firmware"
+now.
+
+ATA devices switched the property from ID_BUS=scsi to ID_BUS=ata.
+ata_id, instead of scsi_id, is the default tool now for ATA devices.
+
+udev 143
+========
+Bugfixes.
+
+The configure options have changed because another library needs to be
+installed in a different location. Instead of exec_prefix and udev_prefix,
+libdir, rootlibdir and libexecdir are used. The Details are explained in
+the README file.
+
+Event processes now get re-used after they handled an event. This reduces
+the number of forks and the pressure on the CPU significantly, because
+cloned event processes no longer cause page faults in the main daemon.
+After the events have settled, a few worker processes stay around for
+future events, all others get cleaned up.
+
+To be able to use signalfd(), udev depends on kernel version 2.6.25 now.
+Also inotify support is mandatory now to run udev.
+
+The format of the queue exported by the udev damon has changed. There is
+no longer a /dev/.udev/queue/ directory. The current event queue can be
+accessed with udevadm settle and libudedv.
+
+Libudev does not have the unstable API header anymore. From now on,
+incompatible changes will be handled by bumping the library major version.
+
+To build udev from the git tree gtk-doc is needed now. The tarballs will
+build without it and contain the pre-built documentation. An online copy
+is available here:
+ http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/
+
+The tools from the udev-extras repository have been merged into the main
+udev repository. Some of the extras have larger external dependencies, and
+they can be disabled with the configure switch --disable-extras.
+
+udev 142
+========
+Bugfixes.
+
+The program vol_id and the library libvolume_id are removed from the
+repository. Libvolume_id is merged with libblkid from the util-linux-ng
+package. Persistent disk links for label and uuid depend on the
+util-linux-ng version (2.15) of blkid now. Older versions of blkid
+can not be used with udev.
+
+Libudev allows to subscribe to udev events. To prevent unwanted messages
+to be delivered, and waking up the subscribing process, a filter can be
+installed, to drop messages inside a kernel socket filter. The filters
+match on the <subsytem>:<devtype> properties of the device.
+ This is part of the ongoing effort to replace HAL, and switch current
+users over to directly use libudev.
+ Libudev is still marked as experimental, and its interface might
+eventually change if needed, but no major changes of the currently exported
+interface are expected anymore, and a first stable release should happen
+soon.
+
+A too old kernel (2.6.21) or a kernel with CONFIG_SYSFS_DEPRECATED
+is not supported since while and udevd will log an error message at
+startup. It should still be able to boot-up, but advanced rules and system
+services which depend on the information not available in the old sysfs
+format will fail to work correctly.
+
+DVB device naming is supplied by the kernel now. In case older kernels
+need to be supported, the old shell script should be added to a compat
+rules file.
+
+udev 141
+========
+Bugfixes.
+
+The processed udev events get send back to the netlink socket. Libudev
+provides access to these events. This is work-in-progress, to replace
+the DeviceKit daemon functionality directly with libudev. There are
+upcoming kernel changes to allow non-root users to subcribe to these
+events.
+
+udev 140
+========
+Bugfixes.
+
+"udevadm settle" now optionally accepts a range of events to wait for,
+instead of waiting for "all" events.
+
udev 139
========
Bugfixes.
~ianmdlvl / elogind.git / blobdiff