#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent _ctls() { local curcontext="$curcontext" state lstate line case "$service" in systemctl) # -s for aggregated options like -aP _arguments -s \ {-h,--help}'[Show help]' \ '--version[Show package version]' \ {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ \*{-p,--property=}'[Show only properties by specific name]:unit property' \ {-a,--all}'[Show all units/properties, including dead/empty ones]' \ '--failed[Show only failed units]' \ "--full[Don't ellipsize unit names on output]" \ '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ '--kill-who=[Who to send signal to]:killwho:(main control all)' \ {-s,--signal=}'[Which signal to send]:signal:_signals' \ {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ {-P,--privileged}'[Acquire privileges before execution]' \ {-q,--quiet}'[Suppress output]' \ '--no-block[Do not wait until operation finished]' \ "--no-wall[Don't send wall message before halt/power-off/reboot]" \ "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ '--no-pager[Do not pipe output into a pager]' \ '--no-ask-password[Do not ask for system passwords]' \ '--system[Connect to system manager]' \ '--user[Connect to user service manager]' \ '--global[Enable/disable unit files globally]' \ {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ '--root=[Enable unit files in the specified root directory]:directory:_directories' \ '--runtime[Enable unit files only temporarily until next reboot]' \ {-n,--lines=}'[Journal entries to show]:number of entries' \ {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \ '*::systemctl command:_systemctl_command' ;; loginctl) _arguments -s \ {-h,--help}'[Show help]' \ '--version[Show package version]' \ \*{-p,--property=}'[Show only properties by this name]:unit property' \ {-a,--all}'[Show all properties, including empty ones]' \ '--kill-who=[Who to send signal to]:killwho:(main control all)' \ {-s,--signal=}'[Which signal to send]:signal:_signals' \ '--no-ask-password[Do not ask for system passwords]' \ {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ {-P,--privileged}'[Acquire privileges before execution]' \ '--no-pager[Do not pipe output into a pager]' \ '*::loginctl command:_loginctl_command' ;; hostnamectl) _arguments -s \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--transient[Only set transient hostname]' \ '--static[Only set static hostname]' \ '--pretty[Only set pretty hostname]' \ '--no-ask-password[Do not prompt for password]' \ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ '*::hostnamectl commands:_hostnamectl_command' ;; journalctl) _arguments -s \ '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \ {-b,--this-boot}'[Show data only from current boot]' \ {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \ '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \ {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \ {-f,--follow}'[Follow journal]' \ {-n,--lines=}'[Number of journal entries to show]:integer' \ '--no-tail[Show all lines, even in follow mode]' \ {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \ '--full[Show long fields in full]' \ {-a,--all}'[Show all fields, including long and unprintable]' \ {-q,--quiet}"[Don't show privilege warning]" \ '--no-pager[Do not pipe output into a pager]' \ {-m,--merge}'[Show entries from all available journals]' \ {-D,--directory=}'[Show journal files from directory]:directories:_directories' \ '--interval=[Time interval for changing the FSS sealing key]:time interval' \ '--verify-key=[Specify FSS verification key]:FSS key' \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--new-id128[Generate a new 128 Bit ID]' \ '--header[Show journal header information]' \ '--disk-usage[Show total disk usage]' \ {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \ '--setup-keys[Generate new FSS key pair]' \ '--verify[Verify journal file consistency]' \ '--list-catalog[List messages in catalog]' \ '--update-catalog[Update binary catalog database]' \ '*::default: _journal_none' ;; localectl) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ "--no-convert[Don't convert keyboard mappings]" \ '--no-pager[Do not pipe output into a pager]' \ '--no-ask-password[Do not prompt for password]' \ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ '*::localectl commands:_localectl_command' ;; systemd-coredumpctl) _arguments \ {-o,--output=}'[Write output to FILE]:output file:_files' \ '--no-pager[Do not pipe output into a pager]' \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '*::systemd-coredumpctl commands:_systemd-coredumpctl_command' ;; timedatectl) _arguments -s \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \ '--no-pager[Do not pipe output into a pager]' \ '--no-ask-password[Do not prompt for password]' \ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ '*::timedatectl commands:_timedatectl_command' ;; udevadm) _arguments \ '--debug[Print debug messages to stderr]' \ '--version[Print version number]' \ '--help[Print help text]' \ '*::udevadm commands:_udevadm_command' ;; systemd-analyze) _arguments \ {-h,--help}'[Show help text.]' \ '--user[Shows performance data of user sessions instead of the system manager.]' \ '--order[When generating graph for dot, show only order]' \ '--require[When generating graph for dot, show only requirement]' \ '*::systemd-analyze commands:_systemd_analyze_command' ;; systemd-ask-password) _arguments \ {-h,--help}'[Show this help]' \ '--icon=[Icon name]' \ '--timeout=[Timeout in sec]' \ '--no-tty[Ask question via agent even on TTY]' \ '--accept-cached[Accept cached passwords]' \ '--multiple[List multiple passwords if available]' ;; systemd-cat) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version.]' \ {-t,--identifier=}'[Set syslog identifier.]' \ {-p,--priority=}'[Set priority value.]:value:({0..7})' \ '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \ ':Message' ;; systemd-cgls) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--no-pager[Do not pipe output into a pager]' \ {-a,--all}'[Show all groups, including empty]' \ '-k[Include kernel threads in output]' \ ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)' ;; systemd-cgtop) _arguments \ {-h,--help}'[Show this help]' \ '--version[Print version and exit]' \ '(-c -m -i -t)-p[Order by path]' \ '(-c -p -m -i)-t[Order by number of tasks]' \ '(-m -p -i -t)-c[Order by CPU load]' \ '(-c -p -i -t)-m[Order by memory load]' \ '(-c -m -p -t)-i[Order by IO load]' \ {-d,--delay=}'[Specify delay]' \ {-n,--iterations=}'[Run for N iterations before exiting]' \ {-b,--batch}'[Run in batch mode, accepting no input]' \ '--depth=[Maximum traversal depth]' ;; systemd-delta) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--no-pager[Do not pipe output into a pager]' \ '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \ {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \ ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)' ;; systemd-detect-virt) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ {-c,--container}'[Only detect whether we are run in a container]' \ {-v,--vm}'[Only detect whether we are run in a VM]' \ {-q,--quiet}"[Don't output anything, just set return value]" ;; systemd-inhibit) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \ '--who=[A descriptive string who is inhibiting]' \ '--why=[A descriptive string why is being inhibited]' \ '--mode=[One of block or delay]' \ '--list[List active inhibitors]' \ '*:commands:_systemd_inhibit_command' ;; systemd-machine-id-setup) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' ;; systemd-notify) _arguments \ {-h,--help}'[Show this help]' \ '--version[Show package version]' \ '--ready[Inform the init system about service start-up completion.]' \ '--pid=[Inform the init system about the main PID of the daemon]' \ '--status=[Send a free-form status string for the daemon to the init systemd]' \ '--booted[Returns 0 if the system was booted up with systemd]' \ '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)' ;; systemd-nspawn) _arguments \ {-h,--help}'[Show this help]' \ {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \ {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \ {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \ '--uuid=[Set the specified uuid for the container.]' \ {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \ '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \ '--read-only[Mount the root file system read only for the container.]' \ '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \ "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \ '-j[Equivalent to --link-journal=guest.]' ;; systemd-tmpfiles) _arguments \ '--create[Create, set ownership/permissions based on the config files.]' \ '--clean[Clean up all files and directories with an age parameter configured.]' \ '--remove[All files and directories marked with r, R in the configuration files are removed.]' \ '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \ '--help[Prints a short help text and exits.]' \ '*::files:_files' ;; systemd-tty-ask-password-agent) _arguments \ {-h,--help}'[Prints a short help text and exits.]' \ '--version[Prints a short version string and exits.]' \ '--list[Lists all currently pending system password requests.]' \ '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \ '--watch[Continuously process password requests.]' \ '--wall[Forward password requests to wall(1).]' \ '--plymouth[Ask question with plymouth(8).]' \ '--console[Ask question on /dev/console.]' ;; *) _message 'eh?' ;; esac } _systemd-nspawn(){ local -a _caps _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG CAP_SYS_RESOURCE CAP_SYS_BOOT ) _values -s , 'capabilities' "$_caps[@]" } _systemd_inhibit_command(){ if (( CURRENT == 1 )); then compset -q _normal else local n=${words[(b:2:i)[^-]*]} if (( n <= CURRENT )); then compset -n $n _alternative \ 'files:file:_files' \ 'commands:command:_normal' && return 0 fi _default fi } _systemd_analyze_command(){ local -a _systemd_analyze_cmds _systemd_analyze_cmds=( 'time:Print the time taken to start' 'blame:prints a list of all running units, ordered by the time they took to initialize' 'plot:prints an SVG graphic detailing which system services have been started at what time' 'dot:Dump dependency graph for dot(1)' ) if (( CURRENT == 1 )); then _describe "options" _systemd_analyze_cmds else _message "no more options" fi } _hosts_or_user_at_host() { _alternative \ 'users-hosts:: _user_at_host' \ 'hosts:: _hosts' } _outputmodes() { local -a _output_opts _output_opts=(short short-monotonic verbose export json json-pretty json-see cat) _describe -t output 'output mode' _output_opts || compadd "$@" } (( $+functions[_systemctl_command] )) || _systemctl_command() { local -a _systemctl_cmds _systemctl_cmds=( "list-units:List units" "start:Start (activate) one or more units" "stop:Stop (deactivate) one or more units" "reload:Reload one or more units" "restart:Start or restart one or more units" "condrestart:Restart one or more units if active" "try-restart:Restart one or more units if active" "reload-or-restart:Reload one or more units if possible, otherwise start or restart" "force-reload:Reload one or more units if possible, otherwise restart if active" "hibernate:Hibernate the system" "hybrid-sleep:Hibernate and suspend the system" "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active" "isolate:Start one unit and stop all others" "kill:Send signal to processes of a unit" "is-active:Check whether units are active" "is-failed:Check whether units are failed" "status:Show runtime status of one or more units" "show:Show properties of one or more units/jobs or the manager" "reset-failed:Reset failed state for all, one, or more units" "load:Load one or more units" "list-unit-files:List installed unit files" "enable:Enable one or more unit files" "disable:Disable one or more unit files" "reenable:Reenable one or more unit files" "preset:Enable/disable one or more unit files based on preset configuration" "mask:Mask one or more units" "unmask:Unmask one or more units" "link:Link one or more units files into the search path" "is-enabled:Check whether unit files are enabled" "list-jobs:List jobs" "cancel:Cancel all, one, or more jobs" "dump:Dump server status" "snapshot:Create a snapshot" "delete:Remove one or more snapshots" "show-environment:Dump environment" "set-environment:Set one or more environment variables" "unset-environment:Unset one or more environment variables" "daemon-reload:Reload systemd manager configuration" "daemon-reexec:Reexecute systemd manager" "default:Enter system default mode" "rescue:Enter system rescue mode" "emergency:Enter system emergency mode" "halt:Shut down and halt the system" "suspend:Suspend the system" "poweroff:Shut down and power-off the system" "reboot:Shut down and reboot the system" "kexec:Shut down and reboot the system with kexec" "exit:Ask for user instance termination" ) if (( CURRENT == 1 )); then _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@" else local curcontext="$curcontext" cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" # Deal with any aliases case $cmd in condrestart) cmd="try-restart";; force-reload) cmd="reload-or-try-restart";; esac if (( $#cmd )); then curcontext="${curcontext%:*:*}:systemctl-${cmd}:" local update_policy zstyle -s ":completion:${curcontext}:" cache-policy update_policy if [[ -z "$update_policy" ]]; then zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy fi _call_function ret _systemctl_$cmd || _message 'no more arguments' else _message "unknown systemctl command: $words[1]" fi return ret fi } __systemctl() { systemctl --full --no-legend --no-pager "$@" } # Fills the unit list _systemctl_all_units() { if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && ! _retrieve_cache SYS_ALL_UNITS; then _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) ) _store_cache SYS_ALL_UNITS _sys_all_units fi } # Fills the unit list including all file units _systemctl_really_all_units() { local -a all_unit_files; local -a really_all_units; if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && ! _retrieve_cache SYS_REALLY_ALL_UNITS; then all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) ) _systemctl_all_units really_all_units=($_sys_all_units $all_unit_files) _sys_really_all_units=(${(u)really_all_units}) _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units fi } _filter_units_by_property() { local property=$1 value=$2 ; shift ; shift local -a units ; units=($*) local prop unit for ((i=1; $i <= ${#units[*]}; i++)); do # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to # revert to calling 'systemctl show' once for all units, which is way # faster unit=${units[i]} prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"} if [[ "${prop}" = "$property=$value" ]]; then echo "${unit}" fi done } _systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )} _systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )} _systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )} _systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )} _systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )} _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )} # Completion functions for ALL_UNITS for fun in is-active is-failed is-enabled status show mask preset ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { _systemctl_really_all_units compadd "$@" -a - _sys_really_all_units } done # Completion functions for ENABLED_UNITS for fun in disable reenable ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { _systemctl_enabled_units compadd "$@" -a - _sys_enabled_units } done # Completion functions for DISABLED_UNITS (( $+functions[_systemctl_enable] )) || _systemctl_enable() { _systemctl_disabled_units compadd "$@" -a - _sys_disabled_units } # Completion functions for FAILED_UNITS (( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() { _systemctl_failed_units compadd "$@" -a - _sys_failed_units || _message "no failed unit found" } # Completion functions for STARTABLE_UNITS (( $+functions[_systemctl_start] )) || _systemctl_start() { _systemctl_inactive_units compadd "$@" -a - _sys_inactive_units } # Completion functions for STOPPABLE_UNITS for fun in stop kill try-restart condrestart ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { _systemctl_active_units compadd "$@" - $( _filter_units_by_property CanStop yes \ ${_sys_active_units[*]} ) } done # Completion functions for ISOLATABLE_UNITS (( $+functions[_systemctl_isolate] )) || _systemctl_isolate() { _systemctl_all_units compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ ${_sys_all_units[*]} ) } # Completion functions for RELOADABLE_UNITS for fun in reload reload-or-try-restart force-reload ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { _systemctl_active_units compadd "$@" - $( _filter_units_by_property CanReload yes \ ${_sys_active_units[*]} ) } done # Completion functions for RESTARTABLE_UNITS for fun in restart reload-or-restart ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { _systemctl_all_units compadd "$@" - $( _filter_units_by_property CanStart yes \ ${_sys_all_units[*]} | while read line; do \ [[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \ done ) } done # Completion functions for MASKED_UNITS (( $+functions[_systemctl_unmask] )) || _systemctl_unmask() { _systemctl_masked_units compadd "$@" -a - _sys_masked_units || _message "no masked unit found" } # Completion functions for JOBS (( $+functions[_systemctl_cancel] )) || _systemctl_cancel() { compadd "$@" - $(__systemctl list-jobs \ | cut -d' ' -f1 2>/dev/null ) || _message "no job found" } # Completion functions for SNAPSHOTS (( $+functions[_systemctl_delete] )) || _systemctl_delete() { compadd "$@" - $(__systemctl list-units --type snapshot --all \ | cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found" } # Completion functions for ENVS for fun in set-environment unset-environment ; do (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() { local fun=$0 ; fun=${fun##_systemctl_} local suf if [[ "${fun}" = "set-environment" ]]; then suf='-S=' fi compadd "$@" ${suf} - $(systemctl show-environment \ | while read line; do echo "${line%%\=}";done ) } done (( $+functions[_systemctl_link] )) || _systemctl_link() { _files } # no systemctl completion for: # [STANDALONE]='daemon-reexec daemon-reload default dump # emergency exit halt kexec list-jobs list-units # list-unit-files poweroff reboot rescue show-environment' # [NAME]='snapshot load' _systemctl_caching_policy() { local _sysunits local -a oldcache # rebuild if cache is more than a day old oldcache=( "$1"(mh+1) ) (( $#oldcache )) && return 0 _sysunits=($(__systemctl --all | cut -d' ' -f1)) if (( $#_sysunits )); then for unit in $_sysunits; do [[ "$unit" -nt "$1" ]] && return 0 done fi return 1 } _list_fields() { local -a journal_fields journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC} ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID} _{P,U,G}ID _COMM _EXE _CMDLINE _AUDIT_{SESSION,LOGINUID} _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID} _SYSTEMD_USER_UNIT _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT _KERNEL_{DEVICE,SUBSYSTEM} _UDEV_{SYSNAME,DEVNODE,DEVLINK} __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP) _describe 'possible fields' journal_fields } _journal_none() { local -a _commands _files _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} ) _alternative : \ 'files:/dev files:_files -W /dev -P /dev/' \ "commands:commands:($_commands[@])" \ 'fields:fields:_list_fields' } _journal_fields() { local -a _fields cmd cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" ) _fields=( ${(f)"$(_call_program fields $cmd[@])"} ) typeset -U _fields _describe 'possible values' _fields } _loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo "$a"; done; }) )} _loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo "$a"; done; }) )} _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo "$a"; done; }) )} # Completion functions for SESSIONS for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() { _loginctl_all_sessions compadd "$@" -a - _sys_all_sessions } done # Completion functions for USERS for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() { _loginctl_all_users compadd "$@" -a - _sys_all_users } done # Completion functions for SEATS (( $+functions[_loginctl_seats] )) || _loginctl_seats() { _loginctl_all_seats compadd "$@" -a - _sys_all_seats } for fun in seat-status show-seat terminate-seat ; do (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() { _loginctl_seats } done # Completion functions for ATTACH (( $+functions[_loginctl_attach] )) || _loginctl_attach() { _loginctl_all_seats _arguments -w -C -S -s \ ':seat:_loginctl_seats' \ '*:device:_files' } # no loginctl completion for: # [STANDALONE]='list-sessions list-users list-seats flush-devices' (( $+functions[_loginctl_command] )) || _loginctl_command() { local -a _loginctl_cmds _loginctl_cmds=( "list-sessions:List sessions" "session-status:Show session status" "show-session:Show properties of one or more sessions" "activate:Activate a session" "lock-session:Screen lock one or more sessions" "unlock-session:Screen unlock one or more sessions" "terminate-session:Terminate one or more sessions" "kill-session:Send signal to processes of a session" "list-users:List users" "user-status:Show user status" "show-user:Show properties of one or more users" "enable-linger:Enable linger state of one or more users" "disable-linger:Disable linger state of one or more users" "terminate-user:Terminate all sessions of one or more users" "kill-user:Send signal to processes of a user" "list-seats:List seats" "seat-status:Show seat status" "show-seat:Show properties of one or more seats" "attach:Attach one or more devices to a seat" "flush-devices:Flush all device associations" "terminate-seat:Terminate all sessions on one or more seats" ) if (( CURRENT == 1 )); then _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@" else local curcontext="$curcontext" cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}" if (( $#cmd )); then curcontext="${curcontext%:*:*}:loginctl-${cmd}:" _call_function ret _loginctl_$cmd || _message 'no more arguments' else _message "unknown loginctl command: $words[1]" fi return ret fi } _hostnamectl_command() { local -a _hostnamectl_cmds _hostnamectl_cmds=( "status:Show current hostname settings" "set-hostname:Set system hostname" "set-icon-name:Set icon name for host" ) if (( CURRENT == 1 )); then _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@" else local curcontext="$curcontext" cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}" if (( $#cmd )); then [[ $cmd == status ]] && msg="no options" || msg="options for $cmd" _message "$msg" else _message "unknown hostnamectl command: $words[1]" fi fi } _localectl_set-locale() { local -a _confs _locales local expl suf _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} ) _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} ) if [[ -prefix 1 *\= ]]; then local conf=${PREFIX%%\=*} compset -P1 '*=' _wanted locales expl "locales configs" \ _combination localeconfs confs=$conf locales "$@" - else compadd -S '=' $_confs fi } _localectl_set-keymap() { local -a _keymaps _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} ) if (( CURRENT <= 3 )); then _describe keymaps _keymaps else _message "no more options" fi } _localectl_set-x11-keymap() { if (( $+commands[pkg-config] )); then local -a _file _layout _model _variant _options local _xorg_lst _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"} _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} ) _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} ) _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} ) _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} ) _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} ) #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} ) #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} ) #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} ) #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} ) case $CURRENT in 2) _describe layouts _layout ;; 3) _describe models _model;; 4) _describe variants _variant;; 5) _describe options _options;; *) _message "no more options" esac fi } _localectl_command() { local -a _localectl_cmds _localectl_cmds=( 'status:Show current locale settings' 'set-locale:Set system locale' 'list-locales:Show known locales' 'set-keymap:Set virtual console keyboard mapping' 'list-keymaps:Show known virtual console keyboard mappings' 'set-x11-keymap:Set X11 keyboard mapping' ) if (( CURRENT == 1 )); then _describe -t commands 'localectl command' _localectl_cmds else local curcontext="$curcontext" cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}" if (( $+functions[_localectl_$cmd] )); then _localectl_$cmd else _message "no more options" fi fi } _timedatectl_set-timezone(){ local -a _timezones _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} ) compadd "$_timezones[@]" } _timedatectl_set-time(){ _message "YYYY-MM-DD HH:MM:SS" } _timedatectl_set-local-rtc(){ local -a _options _options=( '0:Maintain RTC in universal time' '1:Maintain RTC in local time' ) _describe options _options } _timedatectl_set-ntp(){ local -a _options _options=( '0:Disable NTP based network time configuration' '1:Enable NTP based network time configuration' ) _describe options _options } _timedatectl_command(){ local -a _timedatectl_cmds _timedatectl_cmds=( 'status:Show current time settings' 'set-time:Set system time' 'set-timezone:Set system timezone' 'list-timezones:Show known timezones' 'set-local-rtc:Control whether RTC is in local time' 'set-ntp:Control whether NTP is enabled' ) if (( CURRENT == 1 )); then _describe -t commands 'timedatectl command' _timedatectl_cmds else local curcontext="$curcontext" cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}" if (( $#cmd )); then if (( $+functions[_timedatectl_$cmd] )); then _timedatectl_$cmd else _message "no more options" fi else _message "unknown timedatectl command: $words[1]" fi fi } _systemd-coredumpctl_command(){ local -a _systemd_coredumpctl_cmds _systemd_coredumpctl_cmds=( 'list:List available coredumps' 'dump:Print coredump to std' ) if (( CURRENT == 1 )); then _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds else local curcontext="$curcontext" local -a dumps cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}" if (( $#cmd )); then dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" ) if [[ -n "$dumps" ]]; then compadd "${dumps[@]}" else _message "no coredumps" fi else _message "no more options" fi fi } _udevadm_info(){ _arguments \ '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \ '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \ '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \ '--root[Print absolute paths in name or symlink query.]' \ '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \ '--export[Print output as key/value pairs.]' \ '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \ '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \ '--export-db[Export the content of the udev database.]' \ '--cleanup-db[Cleanup the udev database.]' } _udevadm_trigger(){ _arguments \ '--verbose[Print the list of devices which will be triggered.]' \ '--dry-run[Do not actually trigger the event.]' \ '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \ '--action=[Type of event to be triggered.]:actions:(add change remove)' \ '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \ '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \ '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \ '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \ '--property-match=[Trigger events for devices with a matching property value.]' \ '--tag-match=property[Trigger events for devices with a matching tag.]' \ '--sysname-match=[Trigger events for devices with a matching sys device name.]' \ '--parent-match=[Trigger events for all children of a given device.]' } _udevadm_settle(){ _arguments \ '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \ '--seq-start=[Wait only for events after the given sequence number.]' \ '--seq-end=[Wait only for events before the given sequence number.]' \ '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \ '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \ '--help[Print help text.]' } _udevadm_control(){ _arguments \ '--exit[Signal and wait for systemd-udevd to exit.]' \ '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \ '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \ '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \ '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \ '--property=[Set a global property for all events.]' \ '--children-max=[Set the maximum number of events.]' \ '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \ '--help[Print help text.]' } _udevadm_monitor(){ _arguments \ '--kernel[Print the kernel uevents.]' \ '--udev[Print the udev event after the rule processing.]' \ '--property[Also print the properties of the event.]' \ '--subsystem-match=[Filter events by subsystem[/devtype].]' \ '--tag-match=[Filter events by property.]' \ '--help[Print help text.]' } _udevadm_test(){ _arguments \ '--action=[The action string.]:actions:(add change remove)' \ '--subsystem=[The subsystem string.]' \ '--help[Print help text.]' \ '*::devpath:_files -P /sys/ -W /sys' } _udevadm_test-builtin(){ if (( CURRENT == 2 )); then _arguments \ '--help[Print help text]' \ '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)' elif (( CURRENT == 3 )); then _arguments \ '--help[Print help text]' \ '*::syspath:_files -P /sys -W /sys' else _arguments \ '--help[Print help text]' fi } _udevadm_mounts(){ local dev_tmp dpath_tmp mp_tmp mline tmp=( "${(@f)$(< /etc/mtab)}" ) dev_tmp=( "${(@)${(@)tmp%% *}:#none}" ) mp_tmp=( "${(@)${(@)tmp#* }%% *}" ) local MATCH mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}") dpath_tmp=( "${(@Mq)dev_tmp:#/*}" ) dev_tmp=( "${(@q)dev_tmp:#/*}" ) _alternative \ 'device-paths: device path:compadd -a dpath_tmp' \ 'directories:mount point:compadd -a mp_tmp' } _udevadm_command(){ local -a _udevadm_cmds _udevadm_cmds=( 'info:query sysfs or the udev database' 'trigger:request events from the kernel' 'settle:wait for the event queue to finish' 'control:control the udev daemon' 'monitor:listen to kernel and udev events' 'test:test an event run' 'test-builtin:test a built-in command' ) if ((CURRENT == 1)); then _describe -t commands 'udevadm commands' _udevadm_cmds else local curcontext="$curcontext" cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}" if (($#cmd)); then if (( $+functions[_udevadm_$cmd] )); then _udevadm_$cmd else _message "no options for $cmd" fi else _message "no more options" fi fi } _ctls "$@" #vim: set ft=zsh sw=4 ts=4 et