# # Informational and example scsi_id.config file for use with scsi_id. # # General syntax is: # # lower or upper case has no affect on the left side. Quotes (") are # required if you need spaces in values. Model is the same as the SCSI # INQUIRY product identification field. Per the SCSI INQUIRY, the vendor # is limited to 8 bytes, model to 16 bytes. # # The first matching line found is used. Short matches match longer ones, # if you do not want such a match space fill the extra bytes. If no model # is specified, only the vendor string need match. # # The "options" line is searched for when scsi_id starts up, and is # primarily for use with hotplug. # # options= # # vendor=string[,model=string],options= # # If you normally don't need scsi id's, or might be attaching devices of # an unknown functionality, black list everyone. This is the default # behaviour (if no -b or -g is specified). # options=-b # # Then white list devices on your system that have correct and useful id's: # vendor=someone, model=nicedrive, options=-g # If you know all the scsi devices on your system support valid id's, # remove the options=-b line, and mark all devices as good: ## options=-g # Then black list any offenders. Missing entries here could be dangerous # if you rely on the id for persistent naming or multi-path configuration. ## vendor=ELBONIA, model=borken, options=-b # EMC SYMMETRIX models 4 and 5, and some model 6 systems return the VSI # field of the page 83 reply according to SCSI-2 format. This format is # binary encoded hexa-decimal as opposed to the Identifiscation descriptor # utilized by both SPC-2 and SPC-3 compliant systems.